flash galaxy grand failed - Galaxy Grand Duos i9082 Q&A, Help & Troubleshootin

hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone

Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium

akiratoriyama said:
Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
yes i using odid 3.04 and try 3.07 but no resault

hassanshaikhi said:
yes i using odid 3.04 and try 3.07 but no resault
Click to expand...
Click to collapse
Check any kies software is running background
Sent from Gt-I9082

rejocie001 said:
Check any kies software is running background
Sent from Gt-I9082
Click to expand...
Click to collapse
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)

hassanshaikhi said:
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)
Click to expand...
Click to collapse
Kies are used for drivers only its shold not be running ... this same thing hapen with me (i dnt knw perfect resn)... den i stop kies and tried succesful in flashing ... use odin3.04 only ... and while flashing odin may say notresponding just wait for while it will work ... flash amcd6 ron for gud batry and perfrmnce ...
Sent from my GT-I9082 using xda premium

Why do you say to use odin 3.o4 only 3.07 is better and faster.

Suriya357 said:
Why do you say to use odin 3.o4 only 3.07 is better and faster.
Click to expand...
Click to collapse
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium

yeah using odin 3.04 will help and stop kies before flashing always..!!
---------- Post added at 12:19 PM ---------- Previous post was at 12:13 PM ----------
remember place md5 in pda...

adheeshkurekar said:
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
this is becoz i used odin3.07 and it does not work properly for me so i personally use odin 3.04

i close kies from taskmanager but noting change
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
help me (

thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!

hassanshaikhi said:
thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!
Click to expand...
Click to collapse
gr8 then

That's a great news :good:
May be you could share how you succeeded and also edit title and add [SOLVED].
Good luck !!!

Please help.....problem of booting galaxy grand GT-I9082
i wanted to root my phone, unfortunately in odin 3.07, i checked NAND ERASE ALL option. now i cannot start my phone. i recovered rom using samsung kies. bt it doesn't start......plz plz plz help.........

i kinda have the same problem . i know this is an old thread but i cant find solution nowhere.
i am getting the exact fail at the same spot as OP . i would really like to know what you did to succesfully install the software .
also when in download mode i get this?
ODIN MODE
PRODUCT NAME: GT-I9080L
CUSTOM BIN DOWN: Yes ( 10 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Custom
that install bar only gets to 3 millimeter or so than fails.
can anyone pls hel me out

Hi make sure samsung kies not running and connect usb cable in back of youre case not front

just want to comment because i've fixed it:victory::victory::victory::victory::victory:

Related

Odin wont install stock rom

I tried rooting my Galaxy sIII and it failed, and wont boot.
So per recomendations I found here, I downloaded a stock image for the phone, and every one I try to flash, ends in an error in odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALEM_I747ATTALEM_I747UCALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And on the phone it reads:
SW REV CHECK FAIL : FUSED 2 > BINARY 0
HELP!
Bump!
Can anyone help?
BlakDrgn said:
Bump!
Can anyone help?
Click to expand...
Click to collapse
What is your firmware on phone? Did you take last OTA to 4.3?
norbarb said:
What is your firmware on phone? Did you take last OTA to 4.3?
Click to expand...
Click to collapse
Yeah it ota'ed to 4.3 I believe.
BlakDrgn said:
Yeah it ota'ed to 4.3 I believe.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2537910 Read this and some more about 4.3 OTA
http://forum.xda-developers.com/showthread.php?t=2526698
norbarb said:
http://forum.xda-developers.com/showthread.php?t=2537910 Read this and some more about 4.3 OTA
http://forum.xda-developers.com/showthread.php?t=2526698
Click to expand...
Click to collapse
Thanks! reflashed Clockwork mod and the phone booted right up!
Bricked when rolling back from 4.3 to 4.1.2
I got the OTA update 4.3 and it has been draining the battern significantly. So i resorted to revert to 4.1.2 and i think bricked the phone.
This is the error i get from odin when trying to flash 4.1.2
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I see this error in the phone
s3 sw rev check fail: Fused 2 > Binary 0
Now phone does not boot up either. I'm not a android geek - was just trying to get to a older stable version where battery easily lasted for a day...
Saw this thread after i tried to flash 4.1.2 I still don't see a solution posted on how to get the phone to work again...
Please help!!!!!!!!!!!!!!!!!
---------- Post added at 06:41 AM ---------- Previous post was at 06:35 AM ----------
BlakDrgn said:
Thanks! reflashed Clockwork mod and the phone booted right up!
Click to expand...
Click to collapse
Can you please help on how to get this clockwork mod reflashed?

[Q] Odin fails for DN3 rom wifi fix?

Hello all
So im trying to flash the MJ5 bootloarder for my note 2 in order to the wifi working for the DN3 rom. But every time i try to flash the bootloader in odin if fails. What should I do?
Thanks
this is what it says in the message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
weedmon21 said:
Hello all
So im trying to flash the MJ5 bootloarder for my note 2 in order to the wifi working for the DN3 rom. But every time i try to flash the bootloader in odin if fails. What should I do?
Thanks
this is what it says in the message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
+1
On which bootloader are you currently?
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
On which bootloader are you currently?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure. Im guessing the problem because im using the tmobile note 2. I did read through the DN3 posts and someone got theirs to work...
weedmon21 said:
Not sure. Im guessing the problem because im using the tmobile note 2. I did read through the DN3 posts and someone got theirs to work...
Click to expand...
Click to collapse
I don't think your tmobile note 2 is causing the failure. My i317 also have this problem.
I tried different MJ5 but still failed at the same way and also after I flash the DN3 4.4 for , my the baseband will become unknown.

pLZ HELP flash failed

hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
boot into recovery and wipe data/reset and reflash the rom via odin
jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help:crying:
DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:
Try a different usb cable
Sent from my GT-I9082 using Tapatalk
jackeagle said:
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:
Click to expand...
Click to collapse
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....
jackeagle said:
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....
Click to expand...
Click to collapse
Kudos! Use Triangle Away to reset Bin counter :victory: :laugh:

Cant unroot and go back to stock!!!

Ive been stuck with this problem for a while know but it looks like the Superuser.apk is integrated into the phone and eveytime my phone dies the data goes corrupt so I have to re-flash a rom over and over please help (I have the M-919 version but im on Bobcat Rom)
Sent from my GT-I9505 using XDA Free mobile app
Try deleting the superuser app,reboot, flash a stock rom twice with Odin.
Pp.
What if when im flashing it on odin it says failed
Sent from my GT-I9505 using XDA Free mobile app
Pablo_24 said:
What if when im flashing it on odin it says failed
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
What if you tell us what the error message is?
serio22 said:
What if you tell us what the error message is?
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

Categories

Resources