[ROM][WIP][JB][CWM][DEODEXED] XAS Stock 6.2.B.0.200 Firmware Flashable zip - Sony Xperia S, Acro S, Ion

This is the Stock XAS JB 6.2.B.0.200 Firmware. This is a work in Progress.
I'm not responsible for whatever happens to your device. Flash this at your own risk. Don't blame me for anything coz' I'll just smile at you.
Code:
- Rooted
- Deodexed
- Zipaligned
- Busybox
Instructions:
- BACK UP! BACK UP! BACK UP!
- Full wipe (Factory Reset, Cache/Dalvik Cache, System)
- Flash ROM
- Flash Stock JB Kernel (Whatever you prefer - This means if you have a stock "JB" modified kernel and you want to use it, then flash it after the ROM)
- ***** Slap an iPhone user
- Profit
- Reboot
- Enjoy!
- After first boot and setup Reboot your phone(This make's the phone much faster to load. In my Opinion)
Don't worry it should work if you follow the process above.
Now Stop Reading and start Downloading!!!
Code:
[B][SIZE="4"][COLOR="Red"]Download[/COLOR][/SIZE]:[/B]
[B][SIZE="4"][URL="http://www.androidfilehost.com/?fid=22979706399754776"]Link[/URL][/SIZE][/B]
Press thanks and rate the thread if you feel like to and Please give Credits if you're going to use the ROM as base...
Peace Out! :highfive:

Reserved

Reserved..

emceethemouth said:
Instructions:
- BACK UP! BACK UP! BACK UP!
- Full wipe (Factory Reset, Cache/Dalvik Cache, System)
- Flash ROM
- Flash Stock JB Kernel (whatever you prefer)
- ***** Slap an iPhone user
- Profit
Click to expand...
Click to collapse
I dont know any Iphone user... :crying:
will try to install, fingers crossed :silly:

ziecha said:
I dont know any Iphone user... :crying:
will try to install, fingers crossed :silly:
Click to expand...
Click to collapse
Lol!

So this is considered as a fresh rom n free from odex thing?

is the flashable zip a deodexed rom already?

error: Status 6 when installing... anyone else?

ziecha said:
error: Status 6 when installing... anyone else?
Click to expand...
Click to collapse
me too:crying:

in other words its not working??

Can anyone post the error, it's working fine before I posted it. Please post the recovery log so I can see what the error is. Thanks!

tanvinz said:
is the flashable zip a deodexed rom already?
Click to expand...
Click to collapse
I'll upload a dedexed version later.

emceethemouth said:
I'll upload a dedexed version later.
Click to expand...
Click to collapse
prefer kernel ?

Androidians said:
prefer kernel ?
Click to expand...
Click to collapse
The ROM already has a kernel, what i mean is, uf you have a prefered kernel of you choice and it supports stock JB then flash it. But if none, stick with the one that comes with the ROM.

Sir what do you mean by Zipaligned? and is it okay to flash this rom when my old rom is CM10?

darrensumaoy14 said:
Sir what do you mean by Zipaligned? and is it okay to flash this rom when my old rom is CM10?
Click to expand...
Click to collapse
It optimizes the way an Android application package (APK) is packaged. Doing so enables the Android operating system to interact with the application more efficiently, and has the potential to make the application and overall the whole system much faster. Execution time is minimized for zipaligned applications, resulting is lesser amount of RAM consumption when running the APK.
For your second question, yes its ok as long you do a full wipe before flashing it.

i found a way to root your stock rom if you dont trust this one by any chance or if you have errors, happened by coincidence lol
assuming you are on 4.1.2 stock and untouched, flash a custom kernel with twrp + cwm here http://forum.xda-developers.com/showthread.php?t=2309117 using flashtool and unplug your phone,
nexp power on your phone and quick tap sony logo before boot animation shows up to get into twrp,
next try to reboot your phone by pressing reboot in twrp and it will prompt you to root your phone since it's not rooted or to continue with reboot,
just slide to root
next reboot your phone and open superSU, it say about not being rooted properly but worry not, it needs to update
just pres "PLAY" in the bottom left corner of you screen and update superSU in play store
again i do not know what happened there, but it worked!

emceethemouth said:
Can anyone post the error, it's working fine before I posted it. Please post the recovery log so I can see what the error is. Thanks!
Click to expand...
Click to collapse
Starting recovery on Wed Jun 5 05:16:16 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (720 x 1280)
CWM-based Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p3 (null) 0
2 /system ext4 /dev/block/mmcblk0p12 (null) 0
3 /cache ext4 /dev/block/mmcblk0p13 (null) 0
4 /data ext4 /dev/block/mmcblk0p14 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p15 (null) 0
6 /external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=semc
ro.boot.baseband=msm
ro.boot.serialno=CB5120U370
ro.serialno=CB5120U370
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=semc
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_hikari-userdebug 4.2.2 JDQ39E eng.paul.20130507.192912 test-keys
ro.build.version.incremental=eng.paul.20130507.192912
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Вт. мая 7 19:31:20 ALMT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=paul
ro.build.host=paul-eME640
ro.build.tags=test-keys
ro.product.model=Xperia acro S
ro.product.brand=Sony
ro.product.name=LT26w_1266-3204
ro.product.device=hikari
ro.product.board=fuji
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=hikari
ro.build.description=LT26w-user 4.0.4 6.1.A.2.50 zfd_zw test-keys
ro.build.fingerprint=SEMC/LT26w_1266-3204/LT26w:4.0.4/6.1.A.2.50/zfd_zw:user/release-keys
ro.build.characteristics=default
ro.cm.device=hikari
persist.data_netmgrd_nint=3
ro.sf.lcd_density=320
ro.hdmi.enable=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.telephony.ril_class=SonyFujiQualcommRIL
ro.telephony.ril.v3=skippinpukcount
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d
DEVICE_PROVISIONED=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
com.qc.hardware=true
dev.pm.dyn_samplingrate=1
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.opengles.version=131072
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.logs=0
debug.egl.recordable.rgba8888=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130507-UNOFFICIAL-hikari
ro.modversion=10.1-20130507-UNOFFICIAL-hikari
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 2147467264
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8191
Label:
Blocks: 524284
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17192/524284 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 262144000
Block size: 4096
Blocks per group: 32768
Inodes per group: 8000
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 64000
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16000 inodes and 2065/64000 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
rm: can't remove '.' or '..'
rm: can't remove '.' or '..'
Data wipe complete.
-- Installing: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Finding update package...
I:Update location: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Opening update package...
Installing update...
installing samsung updater extensions
line 2 col 67: syntax error, unexpected STRING, expecting ',' or ')'
line 336 col 1: syntax error, unexpected $end, expecting ',' or ')'
2 parse errors
E:Error in /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
(Status 6)
Installation aborted.
I:Can't format unknown volume: /emmc

Zenkai86 said:
Starting recovery on Wed Jun 5 05:16:16 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (720 x 1280)
CWM-based Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p3 (null) 0
2 /system ext4 /dev/block/mmcblk0p12 (null) 0
3 /cache ext4 /dev/block/mmcblk0p13 (null) 0
4 /data ext4 /dev/block/mmcblk0p14 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p15 (null) 0
6 /external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=semc
ro.boot.baseband=msm
ro.boot.serialno=CB5120U370
ro.serialno=CB5120U370
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=semc
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_hikari-userdebug 4.2.2 JDQ39E eng.paul.20130507.192912 test-keys
ro.build.version.incremental=eng.paul.20130507.192912
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Вт. мая 7 19:31:20 ALMT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=paul
ro.build.host=paul-eME640
ro.build.tags=test-keys
ro.product.model=Xperia acro S
ro.product.brand=Sony
ro.product.name=LT26w_1266-3204
ro.product.device=hikari
ro.product.board=fuji
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=hikari
ro.build.description=LT26w-user 4.0.4 6.1.A.2.50 zfd_zw test-keys
ro.build.fingerprint=SEMC/LT26w_1266-3204/LT26w:4.0.4/6.1.A.2.50/zfd_zw:user/release-keys
ro.build.characteristics=default
ro.cm.device=hikari
persist.data_netmgrd_nint=3
ro.sf.lcd_density=320
ro.hdmi.enable=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.telephony.ril_class=SonyFujiQualcommRIL
ro.telephony.ril.v3=skippinpukcount
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d
DEVICE_PROVISIONED=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
com.qc.hardware=true
dev.pm.dyn_samplingrate=1
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.opengles.version=131072
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.logs=0
debug.egl.recordable.rgba8888=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130507-UNOFFICIAL-hikari
ro.modversion=10.1-20130507-UNOFFICIAL-hikari
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 2147467264
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8191
Label:
Blocks: 524284
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17192/524284 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 262144000
Block size: 4096
Blocks per group: 32768
Inodes per group: 8000
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 64000
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16000 inodes and 2065/64000 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
rm: can't remove '.' or '..'
rm: can't remove '.' or '..'
Data wipe complete.
-- Installing: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Finding update package...
I:Update location: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Opening update package...
Installing update...
installing samsung updater extensions
line 2 col 67: syntax error, unexpected STRING, expecting ',' or ')'
line 336 col 1: syntax error, unexpected $end, expecting ',' or ')'
2 parse errors
E:Error in /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
(Status 6)
Installation aborted.
I:Can't format unknown volume: /emmc
Click to expand...
Click to collapse
This is also the error that i get

Ok Thanks, currently working on it. Hold on...

Related

Looking For DEV To Help Port CWM For LG Optimus Elite

Hello xda, we are looking for a DEV because we are having trouble porting CWM on the new LG Optimus Elite and us Optimus Elite user's would GREATLY appreciate if someone could help us! We currently have root. The LG Optimus Elite forum is located at this link: http://androidforums.com/lg-optimus-elite/ Thanks!!
Android311 said:
Hello xda, we are looking for a DEV because we are having trouble porting CWM on the new LG Optimus Elite and us Optimus Elite user's would GREATLY appreciate if someone could help us! We currently have root. The LG Optimus Elite forum is located at this link: http://androidforums.com/lg-optimus-elite/ Thanks!!
Click to expand...
Click to collapse
+1
We need it bad if we there is any chance of getting custom roms. I would donate to the cause. Our user base at the phandroid forums are banging their heads atm trying to get it done. Any and all help is greatly appreciated. Thank you.
Yes I'm willing to donate and im sure user's here and over at androidforums are willing to donate as well! Help is Appreciated
I too would donate to get us a custom recovery.
Dat Bump! we need recovery bad!
+1
+1
This phone is a decent cheap phone.
+1 I really like this phone.
Is it just the CWM recovery that you're asking for? Need to know the partition information of your device.. (is there separate partition available for recovery or it uses the boot partition itself)
superatmos said:
Is it just the CWM recovery that you're asking for? Need to know the partition information of your device.. (is there separate partition available for recovery or it uses the boot partition itself)
Click to expand...
Click to collapse
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\android-sdk-windows\platform-tools\
C:\android-sdk-windows\platform-tools>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ su
su
# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running
Check sdcard for GOTA update : /sdcard/update.zip
Finding update package in sdcard...
I:Update location: /sdcard/update.zip
I:Update file path: /sdcard/update.zip
no image found in sdcard
E:failed to open /sdcard/update.zip (No such file or directory)
# exit
exit
$ exit
exit
Here is a fresh pull of the boot, system and recovery partitions as img files using dd commands:
Download req-files-for-custom-recovery-build-20120716.zip from Sendspace.com - send big files the easy way
Also, here are img files I pulled earlier for somebody else who tried to build CWM. These were pulled using cat commands and have been renamed to boot.img, system.img and recovery.img This zip also contains ADB output, build.prop, and last_log info:
Download Req-files-for-CWM-build.zip from Sendspace.com - send big files the easy way
Thank you very much for the help.
k_t_b said:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\android-sdk-windows\platform-tools\
C:\android-sdk-windows\platform-tools>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ su
su
# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running
Check sdcard for GOTA update : /sdcard/update.zip
Finding update package in sdcard...
I:Update location: /sdcard/update.zip
I:Update file path: /sdcard/update.zip
no image found in sdcard
E:failed to open /sdcard/update.zip (No such file or directory)
# exit
exit
$ exit
exit
Here is a fresh pull of the boot, system and recovery partitions as img files using dd commands:
Download req-files-for-custom-recovery-build-20120716.zip from Sendspace.com - send big files the easy way
Also, here are img files I pulled earlier for somebody else who tried to build CWM. These were pulled using cat commands and have been renamed to boot.img, system.img and recovery.img This zip also contains ADB output, build.prop, and last_log info:
Download Req-files-for-CWM-build.zip from Sendspace.com - send big files the easy way
Thank you very much for the help.
Click to expand...
Click to collapse
Ok. You gave good amount of details.
Anyway, there looks like two separate partitions for boot as well as recovery but sometimes recovery partition might not be used at all.
I will try to make a recovery.img file and provide it here. You can use dd command to push it to recovery partition.
# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running
Can someone share only stock recovery.img and stock boot.img separately??
superatmos said:
Can someone share only stock recovery.img and stock boot.img separately??
Click to expand...
Click to collapse
boot partition: http://www.sendspace.com/file/89l97v
recovery partition: http://www.sendspace.com/file/zlibfl
BTW, I did try builder.clockworkmod.com http://jenkins.cyanogenmod.com/job/recovery/757/ and that recovery did not work.
k_t_b said:
boot partition: http://www.sendspace.com/file/89l97v
recovery partition: http://www.sendspace.com/file/zlibfl
BTW, I did try builder.clockworkmod.com http://jenkins.cyanogenmod.com/job/recovery/757/ and that recovery did not work.
Click to expand...
Click to collapse
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....
jmztaylor said:
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....
Click to expand...
Click to collapse
ESN has been replaced with 00000000000000
http://www.sendspace.com/file/ate07b
New last_kmsg after trying new recovery.img
http://www.sendspace.com/file/cgzcxm
Bump
Hi out there!
I think I´m a little bit in the wrong topic - bt I try to get a working CWM for LG Optimus 3D Max (LGP920).
For my device the recovery partiion is mmblck0p6.
I ran the CWM Online Builder too and copyed this new image to /dev/block.
But if I try booting into CWM, I only get a black screen and nothing happens.
Maybe you know what to do?!
I made a own thread here!
jmztaylor said:
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....
Click to expand...
Click to collapse
Here is a second build - http://jenkins.cyanogenmod.com/job/recovery/2467/
I still can't get it to work.
/proc/config.gz
CONFIG_PHYS_OFFSET=0x00200000
CONFIG_CMDLINE="init=/sbin/init root=/dev/ram rw initrd=0x11000000,16M mem=88M ip=dhcp"
recovery.fstab:
# mount point fstype device [device2]
/boot emmc /dev/block/mmcblk0p9
/cache ext4 /dev/block/mmcblk0p6
/data ext4 /dev/block/mmcblk0p13
/misc emmc /dev/block/mmcblk0
/recovery emmc /dev/block/mmcblk0p14
/system ext4 /dev/block/mmcblk0p12
/sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
/sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
I took the recovery.img which builder.clockworkmod.com spit out and padded it so it was the same size as the stock recovery:
$ su
# tr "\000" "\377" < /dev/zero | dd ibs=512k count=16384 of=/sdcard/recovery-final.img
16384+0 records in
16384+0 records out
8388608 bytes transferred in 0.356 secs (23563505 bytes/sec)
tr: short write
# busybox dd if=/sdcard/recovery.img of=/sdcard/recovery-final.img conv=notrunc
10920+0 records in
10920+0 records out
5591040 bytes (5.3MB) copied, 0.103271 seconds, 51.6MB/s
#
I zeroed out the recovery partition so I could boot into Fastboot:
$ su
# cat /dev/zero > /dev/block/mmcblk0p14
Then I renamed recovery-final.img to recovery.img and used Fastboot to flash it:
C:\Windows\system32>cd C:\Program Files\Android\android-sdk\platform-tools
C:\Program Files\Android\android-sdk\platform-tools>fastboot devices
3122137e fastboot
C:\Program Files\Android\android-sdk\platform-tools>fastboot flash recovery recovery.img
sending 'recovery' (8192 KB)...
OKAY [ 2.487s]
writing 'recovery'...
OKAY [ 5.478s]
finished. total time: 7.971s
C:\Program Files\Android\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.439s
C:\Program Files\Android\android-sdk\platform-tools>
I checked the md5sum for the partition to make sure it matched the recovery.img:
$ su
# busybox md5sum /dev/block/mmcblk0p14
561a27f5fcff924820758659b00422ea /dev/block/mmcblk0p14
I still can't boot into CWM recovery. Anybody have any ideas?
---------- Post added at 06:48 AM ---------- Previous post was at 06:28 AM ----------
last_kmsg:
http://www.sendspace.com/file/pmlauo

JB 4 aussies!

Sent from my XT905 using xda premium
Yeh i Suppose
Yours work?
Failed
Code:
Starting TWRP 2.3.2.3 on Sat Dec 29 12:11:42 2012
I:Internal path defined: '/data/media'
I:External path defined: '/external_sd'
I:Mount: Unable to find partition for path '/data'
Starting the UI...Pixel format: 540x960 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (540 x 960)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/sdcard'
E:Unknown File System: 'datamedia'
I:Processing '/external_sd'
I:Processing '/system'
I:Processing '/cache'
I:Processing '/data'
I:Processing '/boot'
I:Processing '/logo'
I:Processing '/recovery'
I:Processing '/pds'
I:Created '/pds' folder.
I:Processing '/modem'
I:Created '/modem' folder.
Updating partition details...
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Data backup size is 126MB, size: 4592MB, used: 1001MB, free: 3515MB, in data/media: 874MB.
I:'/pds' was 'ext4' now set to 'ext3'
I:Unmounting main partitions...
Partition Logs:
/external_sd | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Wiped Removable Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Display_Name: external_sd
Backup_Path: /external_sd
Backup_Name: external_sd
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/system | /dev/block/mmcblk0p36 | Size: 925MB Used: 656MB Free: 268MB Backup Size: 656MB
Flags: Can_Be_Wiped Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p36
Display_Name: System
Backup_Path: /system
Backup_Name: system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p35 | Size: 755MB Used: 12MB Free: 743MB Backup Size: 12MB
Flags: Can_Be_Wiped Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p35
Display_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p38 | Size: 4592MB Used: 1001MB Free: 3515MB Backup Size: 126MB
Flags: Can_Be_Wiped Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Is_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p38
Display_Name: Data
Backup_Path: /data
Backup_Name: data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/boot | /dev/block/mmcblk0p31 | Size: 10MB
Backup_Method: dd
/logo | /dev/block/mmcblk0p29 | Size: 4MB
Backup_Method: dd
/recovery | /dev/block/mmcblk0p32 | Size: 10MB
Backup_Method: dd
/pds | /dev/block/mmcblk0p27 | Size: 1MB Used: 1MB Free: 0MB Backup Size: 1MB
Flags: Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: pds
Backup_Path: /pds
Backup_Name: pds
Current_File_System: ext3
Fstab_File_System: ext4
Backup_Method: files
/modem | /dev/block/mmcblk0p1 | Size: 98MB Used: 45MB Free: 52MB Backup Size: 45MB
Flags: Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p1
Display_Name: modem
Backup_Path: /modem
Backup_Name: modem
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/TA6760069Z'
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Switching packages (TWRP)
I:Set page: 'clear_vars'
I:Set page: 'main2'
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.serialno=TA6760069Z
ro.boot.baseband=msm
ro.boot.mode=normal
ro.boot.bootloader=0x109B
ro.serialno=TA6760069Z
ro.bootmode=normal
ro.baseband=msm
ro.bootloader=0x109B
ro.hardware=qcom
ro.revision=33440
ro.emmc=1
ro.boot.emmc=1
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JZO54K
ro.build.display.id=cm_scorpion_mini-userdebug 4.1.2 JZO54K eng.dhacker29.20121124.025444 test-keys
ro.build.version.incremental=eng.dhacker29.20121124.025444
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Sat Nov 24 02:55:25 CST 2012
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=dhacker29
ro.build.host=dhacker29
ro.build.tags=test-keys
ro.product.model=XT907
ro.product.brand=Verizon
ro.product.name=scorpion_mini
ro.product.device=scorpion_mini
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=scorpion_mini
ro.build.description=smq_vzw-user 4.1.1 9.8.1Q_25 35 release-keys
ro.build.fingerprint=motorola/XT907_verizon/scorpion_mini:4.1.1/9.8.1Q_25/35:user/release-keys
ro.build.characteristics=default
ro.cm.device=scorpion_mini
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
debug.enable.wl_log=1
debug.sf.no_hw_vsync=1
persist.fuse_sdcard=true
ro.warmboot.capability=1
persist.mot.gps.smart_battery=1
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.usb.mtp=0x2e50
ro.usb.mtp_adb=0x2e51
ro.usb.ptp=0x2e52
ro.usb.ptp_adb=0x2e53
ro.setupwizard.mode=ENABLED
ro.com.google.gmsversion=4.1_r2
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.mot.eri=1
ro.cdma.nbpcd=1
ro.cdma.home.operator.isnan=1
ro.mot.ignore_csim_appid=true
ro.telephony.gsm-routes-us-smsc=1
ro.cdma.otaspnumschema=SELC,1,80,99
ro.mot.phonemode.vzw4gphone=1
ro.com.android.dataroaming=true
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-verizon
ro.cdma.data_retry_config=max_retries=infinite,0,0,10000,10000,100000,10000,10000,10000,10000,140000,540000,960000
ro.gsm.data_retry_config=default_randomization=2000,max_retries=infinite,1000,1000,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=1,15000
persist.mot.gps.locktype=4
persist.mot.gps.assisted=false
persist.radio.mode_pref_nv10=1
persist.radio.vrte_logic=2
persist.radio.0x9e_not_callname=1
persist.radio.skip_data_check=1
persist.ril.max.crit.qmi.fails=4
persist.sys.qc.sub.rstrtlvl=3
persist.sys.qc.sub.rdump.max=20
ro.sf.lcd_density=240
telephony.lteOnCdmaDevice=1
ro.telephony.default_network=10
ro.modem.no_wdog_chk=1
ro.media.enc.aud.fileformat=qcp
ro.media.enc.aud.codec=qcelp
ro.media.enc.aud.bps=13300
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.config.svlte1x=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
drm.service.enabled=true
DEVICE_PROVISIONED=1
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=1
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
com.qc.hardware=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
persist.radio.eons.enabled=true
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
persist.radio.call_type=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.dfr_mode_set=1
persist.gps.qmienabled=true
ro.config.vc_call_vol_steps=7
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.sensors.gestures=false
persist.timed.enable=true
debug.sf.hw=1
debug.egl.hw=1
debug.enabletr=0
debug.composition.type=gpu
debug.mdpcomp.maxlayer=3
debug.mdpcomp.logs=0
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=dmic
ro.qc.sdk.audio.ssr=false
ro.bluetooth.hfp.ver=1.6
ro.qualcomm.bluetooth.sap=true
ro.qualcomm.bt.hci_transport=smd
ro.bluetooth.request.master=true
ro.bluetooth.remote.autoconnect=true
lpa.decode=false
lpa.use-stagefright=true
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
af.resampler.quality=255
mpq.audio.decode=true
ro.opengles.version=131072
persist.sys.root_access=3
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.rommanager.developerid=cyanogenmod
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.cm.version=10-20121124-UNOFFICIAL-scorpion_mini
ro.modversion=10-20121124-UNOFFICIAL-scorpion_mini
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Attempt to load settings from settings file...
I:Version number saved to '/data/media/TWRP/.version'
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Blur_Version.77.176.16.XT905.Telstra.en.AU.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Installing configureflex....
installing gptupgrade updater extensions
installing BL updater extensions
E:unknown command [un_configure]
is_dir_empty(/system/multiconfig/ap)=0In get_config for file [/system/multiconfig/config-id]
Successfully created config-id file
Unable to open config-id file '/system/multiconfig/config-id' (No such file or directory)
In get_config for file [/system/multiconfig/master-config-id]
Value read from pds is 272
From config id 0 .... To config id 272
.. removing configuration for 0
get_folder_path: initial absolute path [/system//multiconfig/ap/0] , sub path [multiconfig/ap/0]
get_folder_path: absolute_path [/system//multiconfig/ap/0], sub_path [multiconfig/ap/0], confid=0
Absoulte folder path /system//multiconfig/ap/0/app
Absoulte folder path /system//multiconfig/ap/0/app/HomeConfig.apk
..File[/system///app/HomeConfig.apk] and is_delete_op = [1] status = [Failure]
.. Error msg is [No such file or directory]
Absoulte folder path /system//multiconfig/ap/0/build.prop
Absoulte folder path /system//multiconfig/ap/0/default.prop
Absoulte folder path /system//multiconfig/ap/0/etc
Absoulte folder path /system//multiconfig/ap/0/etc/apns-conf.xml
..File[/system///etc/apns-conf.xml] and is_delete_op = [1] status = [Failure]
.. Error msg is [No such file or directory]
Absoulte folder path /system//multiconfig/ap/0/lib
Absoulte folder path /system//multiconfig/ap/0/media
Absoulte folder path /system//multiconfig/ap/0/media/audio
Absoulte folder path /system//multiconfig/ap/0/media/audio/alarms
Absoulte folder path /system//multiconfig/ap/0/media/audio/notifications
Absoulte folder path /system//multiconfig/ap/0/media/audio/ringtones
done with remove config...
---- copy config called.. path [/system/multiconfig/ap/backup], mc_sub_path = multiconfig/ap/backup
is_dir_empty(/system/multiconfig/ap/backup)=0command buf is /system/bin/cp -R -h -p /system/multiconfig/ap/backup/* /system/
Copied new configuration successfully for [/system/multiconfig/ap/backup] verify it...
Absoulte folder path /system/multiconfig/ap/backup/app
Absoulte folder path /system/multiconfig/ap/backup/app/HomeConfig.apk
..File[/system//app/HomeConfig.apk] and is_delete_op = [0] status = [Failure]
.. Error msg is [No such file or directory]
Absoulte folder path /system/multiconfig/ap/backup/build.prop
..File[/system//build.prop] and is_delete_op = [0] status = [Success]
Absoulte folder path /system/multiconfig/ap/backup/etc
Absoulte folder path /system/multiconfig/ap/backup/etc/apns-conf.xml
..File[/system//etc/apns-conf.xml] and is_delete_op = [0] status = [Failure]
.. Error msg is [No such file or directory]
get_folder_path: initial absolute path [/system//multiconfig/ap/272] , sub path [multiconfig/ap/272]
get_folder_path: absolute_path [/system//multiconfig/ap/272], sub_path [multiconfig/ap/272], confid=272
---- copy config called.. path [/system//multiconfig/ap/272], mc_sub_path = multiconfig/ap/272
is_dir_empty(/system//multiconfig/ap/272)=0command buf is /system/bin/cp -R -h -p /system//multiconfig/ap/272/* /system/
Copied new configuration successfully for [/system//multiconfig/ap/272] verify it...
Absoulte folder path /system//multiconfig/ap/272/app
Absoulte folder path /system//multiconfig/ap/272/app/HomeConfig.apk
..File[/system///app/HomeConfig.apk] and is_delete_op = [0] status = [Failure]
.. Error msg is [No such file or directory]
Absoulte folder path /system//multiconfig/ap/272/build.prop
..File[/system///build.prop] and is_delete_op = [0] status = [Success]
Absoulte folder path /system//multiconfig/ap/272/default.prop
..File[/system///default.prop] and is_delete_op = [0] status = [Success]
Absoulte folder path /system//multiconfig/ap/272/etc
Absoulte folder path /system//multiconfig/ap/272/etc/apns-conf.xml
..File[/system///etc/apns-conf.xml] and is_delete_op = [0] status = [Failure]
.. Error msg is [No such file or directory]
Absoulte folder path /system//multiconfig/ap/272/lib
Absoulte folder path /system//multiconfig/ap/272/media
Absoulte folder path /system//multiconfig/ap/272/media/audio
Absoulte folder path /system//multiconfig/ap/272/media/audio/alarms
Absoulte folder path /system//multiconfig/ap/272/media/audio/notifications
Absoulte folder path /system//multiconfig/ap/272/media/audio/ringtones
unable to find file : /system/multiconfig/bp/0/bp_nvm.bin
unable to find file : /system/multiconfig/bp/272/bp_nvm.bin
script aborted: assert failed: getprop("ro.product.device") == "scorpion_mini_u" ||
getprop("ro.build.product") == "scorpion_mini_u" ||
getprop("ro.product.device") == "smq_u" ||
getprop("ro.build.product") == "smq_u"
assert failed: getprop("ro.product.device") == "scorpion_mini_u" || getprop("ro.build.product") == "scorpion_mini_u" || getprop("ro.product.device") == "smq_u" || getprop("ro.build.product") == "smq_u"
E:Error in /sdcard/Blur_Version.77.176.16.XT905.Telstra.en.AU.zip
(Status 7)
Error flashing zip '/sdcard/Blur_Version.77.176.16.XT905.Telstra.en.AU.zip'
Updating partition details...
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Data backup size is 126MB, size: 4592MB, used: 1001MB, free: 3515MB, in data/media: 874MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
well i have copyed the zip now but cant work out now how to get it on my pc so i can change the updater script. The file is protected and I cant copy from phone to pc in anyway (ADB,File Transfer,PortGrab cant even change the file permissions nothing any suggestions here would be much appreciated
If someone gets the update successfully could you make a NANDROID or .xml backup
Thankyou All
Cuzzo- said:
well i have copyed the zip now but cant work out now how to get it on my pc so i can change the updater script. The file is protected and I cant copy from phone to pc in anyway (ADB,File Transfer,PortGrab cant even change the file permissions nothing any suggestions here would be much appreciated
If someone gets the update successfully could you make a NANDROID or .xml backup
Thankyou All
Click to expand...
Click to collapse
Using p3droids app ppl can make an xml/zip
Sent from my Nexus 7 using xda premium
pjcons said:
Using p3droids app ppl can make an xml/zip
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yes was aware of that thanks anyway.. Did your update fail?
I Have looked at the log and it looks like the build.prop that TWRP loads is for 4.1.2 and its Dhackers CM10 Prop file or am I wrong?
if anyone could Get P3Droids app to capture the ROM so I could try that
also would love to know if apacheo had any luck with his update cause as far as I know we have done the same things as to get JB running on our Ms
Any other suggestions much appreciated
Thanks
Yeah I managed to get the update on my M.
Had to flash back to Telstra stock ICS though, then the OTA worked properly. Had to use stock recovery too, TWRP wouldn't flash it.
Was a ***** to get it going but I got there in the end.
i have done the fastboot restore to stock ICS how did you get the stock recovery back on Apache? I have tried several times and no dice!
See my PM - you can do it with TWRP, just have to edit the updater-script to remove the asserts.
apacheo said:
Yeah I managed to get the update on my M.
Had to flash back to Telstra stock ICS though, then the OTA worked properly. Had to use stock recovery too, TWRP wouldn't flash it.
Was a ***** to get it going but I got there in the end.
Click to expand...
Click to collapse
could you please post the fxz backup?
apacheo said:
See my PM - you can do it with TWRP, just have to edit the updater-script to remove the asserts.
Click to expand...
Click to collapse
How did you edit the updater-script with TWRP? :S
p3toolbox doesn't seem to be working with telstra's jb. I've been trying for days to do the xml backup. usually it says the sd card is not mounted or it's write protected.
sometimes it does it's thing but the backup folder is always empty.
I managed to "install" ota with twrp, failed right at the end (at the "update partitions" stage) but everything seems to be working fine, no FCs, been using for the last week with absolutely 0 issues)
in the updater script (from meta-inf/google/android) I've deleted the first line (with the mount, don't forget to mount system in twrp before hitting install) + the next 2 asserts (to stop checking build.prop)
hope that helps.
if anyone needs the ota file, just ask
Sent from my Nexus 4 using xda premium
dan.steck said:
p3toolbox doesn't seem to be working with telstra's jb. I've been trying for days to do the xml backup. usually it says the sd card is not mounted or it's write protected.
sometimes it does it's thing but the backup folder is always empty.
I managed to "install" ota with twrp, failed right at the end (at the "update partitions" stage) but everything seems to be working fine, no FCs, been using for the last week with absolutely 0 issues)
in the updater script (from meta-inf/google/android) I've deleted the first line (with the mount, don't forget to mount system in twrp before hitting install) + the next 2 asserts (to stop checking build.prop)
hope that helps.
if anyone needs the ota file, just ask
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Do you mind uploading your ota file Dan?
I tried editing my updater-script like you described but got a "Status 6" error. :S
Thank you
after the update fails, in twrp, you can go in Advanced->Copy Log to SD, look for a recovery.log in the root of your sd card to see exactly what the problem is
Sent from my Nexus 4 using xda premium
---------- Post added at 01:53 PM ---------- Previous post was at 01:37 PM ----------
Forgot to mention: use notepad++ to edit the update script.
Notepad will save things with windows line endings (\r\n) and Android will not like those.
Sent from my Nexus 4 using xda premium
I will bring it to P3Droid's attention that the XML backup seems to be broken on Telstra JB and see if he has any insight into the issue.
Edit: check this thread where he responded about another issue with similar symptoms that is resolved by reinstalling busybox from the market.
That should fix the mount error with the sdcard.
http://forum.xda-developers.com/showthread.php?t=2144335
Firmwares Coming Soon!!!: http://forum.xda-developers.com/showthread.php?t=2169220
Non English languages support in Aussie Razr M
Hi,
Could anyone from Australia confirm whether the Aussie version of the Razr M supports other languages like french, fpanish, etc in JB...?
I'm looking forward to buying one and I need both european languages on top of english.
Thanks in advance,
Melchior.

Can not install cook room such as CM10.1 or Taks650

Hi,
First of all, I would like to let you know that I have do this job (flashing CM10 and Task650 many time in this phone before)
Last month my phone break the glass and I bring it to a shop to fix, don't know what did they do but after that, everytime I try to flash cook rom, I received alarm like this:
At that time and now I using stock 4.0.4 I747UCLG1
script aborted: assert failed: getprop("ro.bootloader") == "I747UCDLK3" ||
getprop("ro.bootloader") == "I747MVLDLK4"
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747MVLDLK4"
E:Error in /sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
I searched and found that many people metion about wrong recovery version/carrier but I am sure that I use the correct one (CWM and TWRP also)
Here is full log file from CMW. Please help
Thank you
Starting recovery on Sun Jan 25 13:49:12 1970
framebuffer: fd 4 (720 x 1280)
ClockworkMod Recovery v6.0.3.1
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p7 (null) 0
2 /system ext4 /dev/block/mmcblk0p14 (null) 0
3 /data ext4 /dev/block/mmcblk0p15 (null) -16384
4 /cache ext4 /dev/block/mmcblk0p17 (null) 0
5 /recovery emmc /dev/block/mmcblk0p18 (null) 0
6 /sdcard datamedia /dev/null (null) 0
7 /external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.debug_level=0x4f4c
ro.boot.emmc_checksum=3
ro.boot.bootloader=I747UCALG1
ro.boot.nvdata_backup=0
ro.boot.boot_recovery=1
ro.boot.emmc=true
ro.boot.serialno=520b9a19
ro.boot.baseband=msm
ro.serialno=520b9a19
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=I747UCALG1
ro.hardware=qcom
ro.revision=16
ro.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39
ro.build.display.id=cm_d2att-userdebug 4.2.2 JDQ39 eng.hudson.20130413.132003 test-keys
ro.build.version.incremental=eng.hudson.20130413.132003
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Apr 13 13:20:47 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2att
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=d2att
ro.build.description=d2uc-user 4.0.4 IMM76D I747UCALEM release-keys
ro.build.fingerprint=samsung/d2uc/d2att:4.0.4/IMM76D/I747UCALEM:user/release-keys
ro.build.characteristics=default
ro.cm.device=d2att
rild.libargs=-d /dev/smd0
ro.telephony.ril_class=SamsungQualcommD2RIL
telephony.lteOnGsmDevice=1
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.config.svlte1x=true
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=1
media.aac_51_output_enabled=true
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130413-UNOFFICIAL-d2att
ro.modversion=10.1-20130413-UNOFFICIAL-d2att
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Running extendedcommand...
Waiting for SD Card to mount (20s)
I:using /data/media for /sdcard.
SD Card mounted...
Verifying SD Card marker...
6394158aa7629c1e43ac4a92942e158b
I:Running script:
I:
run_program("/sbin/cp", "-R", "/cache/recovery", "/tmp/recovery");
ui_print("ROM Manager Version 5.5.2.3");
ui_print("June 2, 2013");
ui_print("Preparing to install ROM...");
run_program("/cache/dowipedalvikcache.sh");
mount("/system");
run_program("/sbin/chmod", "+x", "/tmp/recovery/11-rommanager.sh");
run_program("/tmp/recovery/11-rommanager.sh", "place");
run_program("/sbin/umount", "/system");
assert(install_zip("/sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip"));
parse returned 0; 0 errors encountered
about to run program [/sbin/cp] with 4 args
ROM Manager Version 5.5.2.3
June 2, 2013
Preparing to install ROM...
about to run program [/cache/dowipedalvikcache.sh] with 1 args
mount: mounting /dev/block/mmcblk0p15 on /data failed: Device or resource busy
mount: mounting /dev/block/mmcblk0p17 on /cache failed: Device or resource busy
mount: can't find /sd-ext in /etc/fstab
umount: can't umount /sd-ext: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/chmod] with 3 args
about to run program [/tmp/recovery/11-rommanager.sh] with 2 args
mount: mounting /dev/block/mmcblk0p14 on /system failed: Device or resource busy
about to run program [/sbin/umount] with 2 args
-- Installing: /sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip
Finding update package...
I:Update location: /sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip
I:using /data/media for /sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip.
Opening update package...
Installing update...
Warning: No file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "I747UCDLK3" ||
getprop("ro.bootloader") == "I747MVLDLK4"
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747MVLDLK4"
E:Error in /sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/aokp_d2att_ota-eng-task650_5.27.2013.zip")
I:using /data/media for /sdcard.
Click to expand...
Click to collapse
You need to flash the latest bootloader, or you can't update.
Do you have an AT&T Device? Or is it Canadian? That way, I can direct you to the right bootloader, you must be absolutely positive when flashing a bootloader or bad things will happen...
EDIT: Wait, you're still on ICS. Best way to go from here is flash a complete stock ROM,
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
choose the one for your carrier and flash. BACKUP ALL YOUR DATA FIRST., INCLUDING THE SD CARD.
Then you will be able to flash the latest ROMS.
This is a bootloader error. CM/aokp require the latest bootloader. Update to the latest 4.1.1 stock firmware to resolve this. Stock rooted firmware can be located in the Android Development section. Be sure all your files are backed up.
xBeerdroiDx said:
This is a bootloader error. CM/aokp require the latest bootloader. Update to the latest 4.1.1 stock firmware to resolve this. Stock rooted firmware can be located in the Android Development section. Be sure all your files are backed up.
Click to expand...
Click to collapse
Thank you,
My phone is ATT (I747), so can you give me a link how to download and install latest bootloader
r0ckvn said:
Thank you,
My phone is ATT (I747), so can you give me a link how to download and install latest bootloader
Click to expand...
Click to collapse
Thanks mates, I can flash rooms now. Thank you so much
r0ckvn said:
Thanks mates, I can flash rooms now. Thank you so much
Click to expand...
Click to collapse
good stuff, buddy. enjoy the new roms. cheers

Recovery enable to mount external_sd

Dears,
to do a backup I actually have to reboot into recovery and start a backup to sdcard0.
It seems to be unable to mount exsdcard, also if I try to mount it manually.
I use ROM Manager 5.5.2.3 with CWM recovery 6.0.3.2, this is the recovery.log:
Starting recovery on Wed Jun 12 06:24:25 2013
framebuffer: fd 4 (720 x 1280)
ClockworkMod Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /efs ext4 /dev/block/mmcblk0p3 (null) 0
2 /boot emmc /dev/block/mmcblk0p8 (null) 0
3 /recovery emmc /dev/block/mmcblk0p9 (null) 0
4 /cache ext4 /dev/block/mmcblk0p12 (null) 0
5 /system ext4 /dev/block/mmcblk0p13 (null) 0
6 /data ext4 /dev/block/mmcblk0p16 (null) -16384
7 /preload ext4 /dev/block/mmcblk0p14 (null) 0
8 /modem emmc /dev/block/mmcblk0p10 (null) 0
9 /sdcard datamedia /dev/null (null) 0
10 /external_sd ext4 /dev/block/mmcblk1p1 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.baseband=mdm
ro.boot.debug_level=0x4f4c
ro.boot.emmc_checksum=3
ro.boot.bootloader=N7105XXDMC3
ro.boot.serialno=42f72b9449b2bf03
ro.serialno=42f72b9449b2bf03
ro.bootmode=unknown
ro.baseband=mdm
ro.bootloader=N7105XXDMC3
ro.hardware=smdk4x12
ro.revision=10
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_t0lte-userdebug 4.2.2 JDQ39E eng.hudson.20130604.050149 test-keys
ro.build.version.incremental=eng.hudson.20130604.050149
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Tue Jun 4 05:02:34 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=GT-N7105
ro.product.brand=samsung
ro.product.name=t0lte
ro.product.device=t0lte
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exynos4
ro.build.product=t0lte
ro.build.description=t0ltexx-user 4.1.2 JZO54K N7105XXDLL4 release-keys
ro.build.fingerprint=samsung/t0ltexx/t0lte:4.1.2/JZO54K/N7105XXDLL4:user/release-keys
ro.build.characteristics=default
ro.cm.device=t0lte
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.telephony.default_network=9
telephony.lteOnGsmDevice=1
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
persist.radio.adb_log_on=1
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130604-UNOFFICIAL-t0lte
ro.modversion=10.1-20130604-UNOFFICIAL-t0lte
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.telephony.ril_class=SamsungQualcommRIL
mobiledata.interfaces=pdp0,wlan0,gprs,ppp0
ro.ril.hsxpa=1
ro.ril.gprsclass=10
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
hwui.render_dirty_regions=false
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
adb.recovery=1
init.svc.adbd=running
service.adb.root=1
I:Checking for extendedcommand...
I:Running extendedcommand...
Waiting for SD Card to mount (20s)
I:using /data/media for /sdcard.
SD Card mounted...
Verifying SD Card marker...
0b563cbc46d6718583b43d603d158511
I:Running script:
I:
run_program("/sbin/cp", "-R", "/cache/recovery", "/tmp/recovery");
ui_print("ROM Manager Version 5.5.2.3");
ui_print("12 giugno 2013");
assert(backup_rom("/external_sd/clockworkmod/backup/2013-06-12-08.23.48"));
parse returned 0; 0 errors encountered
about to run program [/sbin/cp] with 4 args
ROM Manager Version 5.5.2.3
12 giugno 2013
I:using /data/media for /sdcard.
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument)
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument)
Can't mount backup path.
result was NULL, message is: assert failed: backup_rom("/external_sd/clockworkmod/backup/2013-06-12-08.23.48")
I:using /data/media for /sdcard.
Thanks everybody!
Try with TWRP recovery.. Works every time with me..
Sent from my GT-N7100
sdcard Marker
Sent from my GT-N7100 using XDA Premium 4 mobile app

[THEME][APP]Multiwindow Transparency -4 new colors- {0%-25%-50%-75%} (4.4.2)

Some links might be down because dev-host removes files that aren't downloaded frequently enough. If one is down and you want it just let me know and I'll re-upload it for you.
Some people in jedi asked for multiwindow transparency so I threw these together tonight.
Pretty straight forward modification, should work with any stock based rom that doesn't have transparency already. Most likely won't work with odexed roms.
##I'm not responsible if your phone breaks for any reason
Transparent:
Multiwindow transparency.zip - 1.64 MB
md5: f504e8a2d063f1701c857fc1560711e9
screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
25%:
Multiwindow 25percent.zip - 1.64 MB
md5: c02b970dc204965b85671fe41ace2d70
screenshot:
50%:
Multiwindow 50percent.zip - 1.64 MB
md5: 2cb5fc7570db6c29916748a18c26a766
screenshot:
75%:
Multiwindow 75percent.zip - 1.64 MB
md5: 10ee7bd31bc716269ee3ad6159cffa7f
screenshot:
Inverted:
Multiwindow Inverted.zip - 1.64 MB
md5: 9716dfa9242514fe6e6bb06336f4973e
Inverted 25%:
Multiwindow Inverted25percent.zip - 1.64 MB
md5: 4d3f3d73cb9e368cbcbdae107ecc9fb7
Inverted 50%
Multiwindow Inverted50percent.zip - 1.64 MB
md5: 99f3c4f36ce8b8925668f10c8830de75
Inverted 75%:
Multiwindow Inverted75percent.zip - 1.64 MB
md5:d851a3488a88fe03430c4e23f4273f26
Installation instructions:
1. Flash in recovery
2. Reboot
3. ?
4. Profit!
Don't forget to hit the thanks button!
DO NOT KANG MY WORK. Especially this one. Its a really simple mod, if you can kang it you can easily just make it.
Colors!
Blue
Solid:
Multiwindow Blue.zip - 1.64 MB
md5:
Screenshot:
75%:
Multiwindow Blue75percent.zip - 1.64 MB
md5:
Screenshot:
50%:
Multiwindow Blue50percent.zip - 1.64 MB
md5:
Screenshot:
25%:
Multiwindow Blue25percent.zip - 1.64 MB
md5:
Screenshot:
Green
Solid:
Multiwindow Green.zip - 1.64 MB
md5:
Screenshot:
75%:
Multiwindow Green75percent.zip - 1.64 MB
md5:
Screenshot:
50%:
Multiwindow Green50percent.zip - 1.64 MB
md5:
Screenshot:
25%:
Multiwindow Green25percent.zip - 1.64 MB
md5:
Screenshot:
Cyan
Solid:
Multiwindow Cyan.zip - 1.64 MB
md5:
Screenshot:
75%:
Multiwindow Cyan75percent.zip - 1.64 MB
md5:
Screenshot:
50%:
Multiwindow Cyan50percent.zip - 1.64 MB
md5:
Screenshot:
25%:
Multiwindow Cyan25percent.zip - 1.64 MB
md5:
Screenshot:
Red
Solid:
Multiwindow Red.zip - 1.64 MB
md5:
Screenshot:
75%:
Multiwindow Red75percent.zip - 1.64 MB
md5:
Screenshot:
50%:
Multiwindow Red50percent.zip - 1.64 MB
md5:
Screenshot:
25%:
Multiwindow Red25percent.zip - 1.64 MB
md5:
Screenshot:
Reserved.
Can I Kang this? TIF
apen83 said:
Can I Kang this? TIF
Click to expand...
Click to collapse
Only if you get it to work on your nexus 5!
Sent from my SM-N900T using XDA Premium 4 mobile app
Done and kanged with no credit given..
I'm on Jedi Elite Vs 1.1, attempted to flash and the installation was aborted, status 7 I believe. No other mods with wanam or exposed.
ggrant3876 said:
I'm on Jedi Elite Vs 1.1, attempted to flash and the installation was aborted, status 7 I believe. No other mods with wanam or exposed.
Click to expand...
Click to collapse
Post your recovery log
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
markbencze said:
Post your recovery log
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
Click to expand...
Click to collapse
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on (UTC) Sun Jun 21 21:56:15 1970
framebuffer: fd 4 (1080 x 1920)
PhilZ Touch 6.19.3
Clockworkmod v6.0.4.7
Ievice target: Note 3 (cm_hlte)
I:Touch GUI revision: 1.01
extra filesystem table (device2, fstype2, options2):
0 /storage/sdcard1 auto /dev/block/mmcblk1p1 0
1 /storage/usbdisk auto /dev/block/sda1 0
recovery filesystem table
=========================
0 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot 0
1 /recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery 0
2 /system ext4 /dev/block/platform/msm_sdcc.1/by-name/system 0
3 /data ext4 /dev/block/platform/msm_sdcc.1/by-name/userdata 0
4 /cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache 0
5 /efs ext4 /dev/block/platform/msm_sdcc.1/by-name/efs 0
6 /storage/sdcard1 auto /devices/msm_sdcc.3/mmc_host/mmc2 0
6 /storage/sdcard1 auto /dev/block/mmcblk1p1 0
7 /storage/usbdisk auto /devices/platform/msm_hsusb_host/usb 0
7 /storage/usbdisk auto /dev/block/sda1 0
8 /tmp ramdisk ramdisk 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /preload during fstab generation!
W:Unable to get recovery.fstab info for /sdcard during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
I:using /data/media/0 for /sdcard
I:Connected to Vold..
I:110 0 sdcard1 /storage/sdcard1 1
I:110 0 usbdisk /storage/usbdisk 0
I:200 0 Volumes listed.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
I:auto_restore_settings set to default (false)
I:check_root_and_recovery set to default (true)
I:compression_value set to default (low)
I:twrp_backup_mode set to default (false)
I:enable_md5sum set to default (1)
I:show_nandroid_size_progress set to default (1)
I:use_nandroid_simple_logging set to default (1)
I:nand_prompt_on_low_space set to default (1)
I:signature_check_enabled set to default (0)
I:set_brightness set to default (160)
I:menu_height_increase=40
I:show_virtual_keys=1
I:min_log_rows set to default (3)
I:background_image set to default (default)
I:background_image set to default
Iefault stitch background loaded.
I:show_background_icon set to default (false)
I:show_battery set to default (true)
I:show_clock set to default (true)
I:menu_text_color set to default (8)
I:menu_background_color set to default (1)
I:menu_highlight_color set to default (7)
I:normal_text_color set to default (0)
I:menu_separator_color set to default (6)
I:header_text_color set to default (8)
I:batt_clock_color set to default (2)
I:menu_background_transparency set to default (102)
I:menu_highlight_transparency set to default (102)
I:menu_separator_transparency set to default (102)
I:show_menu_separation set to default (true)
I:dim_timeout set to default (60)
I:blank_timeout set to default (180)
I:scroll_sensitivity=80
I:touch_accuracy set to default (7)
I:touch_to_validate=1
I:enable_vibrator set to default (true)
I:boardEnableKeyRepeat set to default (true)
I:wait_after_install set to default (true)
I:slide_left_action set to default (5)
I:slide_right_action set to default (3)
I:double_tap_action set to default (2)
Iress_lift_action set to default (4)
Iress_move_action set to default (0)
I:t_zone set to default (0)
I:t_zone_offset set to default (0)
I:use_dst_time set to default (false)
I:Current time: 1970-06-21 21:56:17 (UTC 0:00)
I:use_qcom_time_daemon set to default (0)
I:use_qcom_time_offset set to default (0)
Command: "/sbin/recovery"
af.resampler.quality=4
av.offload.enable=true
ro.cm.device=hlte
ro.cm.display.version=11-20140302-UNOFFICIAL-hlte
ro.cm.version=11-20140302-UNOFFICIAL-hlte
ro.qc.sdk.izat.service_mask=0x0
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.audio.fluencetype=fluence
ro.sf.lcd_density=480
ro.adb.secure=1
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.gps.agps_provider=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.emmc=true
ro.boot.sec_atd.tty=/dev/ttyHSL0
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.boot.serialno=618dbecd
ro.boot.bootloader=N900TUVUCNB4
ro.boot.debug_level=0x4f4c
ro.boot.warranty_bit=1
ro.boot.boot_recovery=1
ro.boot.emmc_checksum=3
ro.boot.nvdata_backup=0
ro.boot.cp_debug_level=0x55FF
ro.emmc=0
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=msm8974
ro.build.id=KOT49H
ro.build.date=Sun Mar 2 13:42:58 CET 2014
ro.build.date.utc=0
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=root
ro.build.display.id=cm_hlte-userdebug 4.4.2 KOT49H 0bcc0d002d test-keys
ro.build.product=hlte
ro.build.selinux=1
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.version.incremental=0bcc0d002d
ro.build.description=hltetmo-user 4.3 JSS15J N900TUVUBMI7 release-keys
ro.build.fingerprint=samsung/hltetmo/hltetmo:4.3/JSS15J/N900TUVUBMI7:user/release-keys
ro.build.characteristics=default
ro.hdcp2.rx=tz
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.notification_sound=OnTheHunt.ogg
ro.secure=1
ro.secwvk=144
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.carrier=unknown
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=cm_hlte
ro.product.board=MSM8974
ro.product.brand=samsung
ro.product.model=SM-N900T
ro.product.device=hltetmo
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=samsung
ro.baseband=msm
ro.bootmode=unknown
ro.chipname=msm8974
ro.hardware=qcom
ro.opengles.version=196608
ro.qualcomm.cabl=1
ro.revision=8
ro.serialno=618dbecd
ro.telephony.ril.v3=newDialCode
ro.telephony.call_ring.multiple=0
ro.telephony.ril_class=SamsungQualcommRIL
ro.telephony.default_network=10
ro.bootloader=N900TUVUCNB4
ro.debuggable=1
ro.modversion=11-20140302-UNOFFICIAL-hlte
ro.rommanager.developerid=cyanogenmod
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
ro.use_data_netmgrd=true
net.bt.name=Android
net.change=net.bt.name
ril.subscription.types=NV,RUIM
init.svc.adbd=running
init.svc.vold=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.setup_adbd=stopped
rild.libargs=-d /dev/smd0
rild.libpath=/system/lib/libsec-ril.so
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=false
debug.sf.hw=1
debug.egl.hw=1
debug.mdpcomp.logs=0
debug.sensors=1
dalvik.vm.heapsize=512m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.gps.qc_nlp_in_use=0
persist.hwc.mdpcomp.enable=true
persist.sys.dun.override=0
persist.sys.usb.config=mtp,adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
persist.data.netmgrd.qos.enable=true
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.fluence.speaker=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.voicecall=true
persist.radio.add_power_save=1
persist.radio.mode_pref_nv10=1
persist.radio.lte_vrat_report=1
persist.radio.apm_sim_not_pwdn=1
persist.timed.enable=true
service.adb.root=1
keyguard.no_require_sim=true
recovery.perf.mode=0
telephony.lteOnCdmaDevice=1
I:Checking for extendedcommand & OpenRecoveryScript...
I:Skipping execution of extendedcommand, file not found...
I:Skipping execution of OpenRecoveryScript, file not found...
I:setting up /data/media(/0) for /sdcard.
I:using /data/media/0 for /sdcard
/tmp/recovery.log copied to /sdcard/clockworkmod/philz_recovery.log
Send file to Phil3759 @xda
I:setting up /data/media(/0) for /sdcard.
I:using /data/media/0 for /sdcard
Worked and looks great thanks
Sent from my SM-N900T using xda app-developers app
Ok dude that log doesn't have anything usefu in it.
Dl and try again
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
markbencze said:
Ok dude that log doesn't have anything usefu in it.
Dl and try again
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
Click to expand...
Click to collapse
Redownloaded, checked the md5sum, this time wiped cache and dalvik and it still fails. No sense sending another recovery log as it didn't do any good last time.
This is cool as f*** keep up the good work
Sent from my SM-N900T using XDA Premium 4 mobile app
Great Mod
Very good work, thank you so much. It looks great. Also, for those who may be having issues flashing the file, you can always push the file manually to your system/app folder.
1. Move or delete original MultiWindowTrayService.apk file ( recomend just moving the file to an external sd card for safe keping).
2. Extract the downoaded zip file to the same pathway.
3. Move the apk file to your system/app pathway.
4. Then change permission to rw-r-r.
5. Then reboot.
Should work great. Hope it helps.
ggrant3876 said:
Redownloaded, checked the md5sum, this time wiped cache and dalvik and it still fails. No sense sending another recovery log as it didn't do any good last time.
Click to expand...
Click to collapse
Ok do me two favors, first on the first log can you put {hide} at the beginning and {/hide} at the end but with [ <- those brackets.
Second, try to flash again and PM me the log from where the flash starts. That log looked like it was just from recovery booting.
Also, which one were you trying to use? 25% or...You get the idea. Pretty sure they all worked last night, but I may need to re upload that one. Something may have happened.
But we'll get this working one way or another.
Sent from my SM-N900T using XDA Premium 4 mobile app
kushXmaster said:
Ok do me two favors, first on the first log can you put {hide} at the beginning and {/hide} at the end but with [ <- those brackets.
Second, try to flash again and PM me the log from where the flash starts. That log looked like it was just from recovery booting.
Also, which one were you trying to use? 25% or...You get the idea. Pretty sure they all worked last night, but I may need to re upload that one. Something may have happened.
But we'll get this working one way or another.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I use the sdk to get the logcat but not sure exactly how to get what you need. I was flashing the 100% transparent.
ggrant3876 said:
I use the sdk to get the logcat but not sure exactly how to get what you need. I was flashing the 100% transparent.
Click to expand...
Click to collapse
Ya log cat won't help lol.
OK, so try to flash it again. When it fails go to advanced in twrp and then tap copy log to sd. This will put the log on your sd card where most file managers open by default. If you don't see it in the first screen on your file explorer navigate to /data/media/0/ and find recovery.log
Either post the file here or upload it and PM me the link.
I'm gonna download and see if something got messed up when I uploaded.
Edit: Ok, I just downloaded and it flashed fine. It might be something on your end with twrp. Try downloading one of the other ones and see if it flashes
Sent from my SM-N900T using XDA Premium 4 mobile app
Will it work on wicked kit kag
Sent from my SM-N900T using Tapatalk
chuko303 said:
Will it work on wicked kit kag
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I don't see any reason it wouldn't. It just replaces the multiwindow app included with my themed one.
Sent from my SM-N900T using XDA Premium 4 mobile app
I tried to flash and got this msg:
Set_perm some changes failed
E:Error in /data/media/0/multi Window 75transparent.zip
(Status 7)

Categories

Resources