CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is the support thread for CM10.2 on the T-mobile Samsung Galaxy S II. It is still a major work in progress, so please make sure you have a backup that you can restore if you run into problems.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view http://changelog.bbqdroid.org for a full list of changes.
IRC SUPPORT:
Join us in #teamchopsticks or #cyanogenmod on the Freenode IRC network.
DO NOT ASK FOR SUPPORT IF YOU FLASH A DIFFERENT KERNEL!
The kernel packaged with CM10.2 is very tightly coupled with the ROM code. If you install a kernel different from the one in this ROM, please do not ask for any support.
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Please see our blog at http://www.teamchopsticks.org for installation, download links and release notes.
Install instructions:
Installation, Download, and Release Notes: http://www.teamchopsticks.org/p/cm102-release-notes.html
Contributing/Building: http://www.teamchopsticks.org/p/contributing.html
FAQ/Troubleshooting: http://www.teamchopsticks.org/p/faq.html
NOTE! You MUST use the recovery provided at the install link otherwise you will boot loop!
NOTE! You MUST wipe /cache, /data, and /system!! Also, make sure you install a 4.3-compatible gapps package. See our blog for more information.
The CyanogenMod team and TeamChopsticks would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Womp womp! Good job Nancy.
Thanks Guys!!
---------- Post added at 10:01 PM ---------- Previous post was at 09:51 PM ----------
I see the 20130729 gapps are posted, aren't the 20130813 the 4.3 set ?
so... is cwm permanent or will we be able to flash with twrp in the near future?
cause i personally cant stand cwm, got soo used to twrp and going to be hard to go back, i had some bad experiences with it
mycars12 said:
so... is cwm permanent or will we be able to flash with twrp in the near future?
cause i personally cant stand cwm, got soo used to twrp and going to be hard to go back, i had some bad experiences with it
Click to expand...
Click to collapse
Well, that's it for now - we technically don't maintain the recoveries, so you'll have to talk to the folks that support them directly. This particular one is the stock CM recovery that we added external_sd support to and it is build with the proper SELinux capability to prevent the reboot of doom seen with the CM10.1 based recoveries.
Ohhh yeah, just saw this drop on g+. Downloading now, thanks for the hard work. Will report back once up and running
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
so flash it using the provided recovery then... Switch back to twrp. UNDERSTOOD SIR
JesusWazBlack said:
so flash it using the provided recovery then... Switch back to twrp. UNDERSTOOD SIR
Click to expand...
Click to collapse
If you do that, you are on your own. The 10.1 recoveries do not know how to deal with the SELinux capable file system properly. You can run into some major snags that way.
This recovery, although it's very basic, works just fine for flashing zips and taking backups. Plus, it is the only one right now for the Hercules and Skyrocket that correctly works with the new filesystem for 4.3
car vs driver said:
If you do that, you are on your own. The 10.1 recoveries do not know how to deal with the SELinux capable file system properly. You can run into some major snags that way.
This recovery, although it's very basic, works just fine for flashing zips and taking backups. Plus, it is the only one right now for the Hercules and Skyrocket that correctly works with the new filesystem for 4.3
Click to expand...
Click to collapse
Oh alright. Guess no twrp then Lol. Thanks for the work! Appreciate it
No sweat man, I"m sure it's only a matter of time before the appropriate changes are made to TWRP and CWMR Touch. Our device is a bit of an oddball in how the storage volumes are setup, so this issue was really unique to us with 4.3
Woohoo! Thanks devs! This phone will remain me for a long time to come so this gives me a smile
Once again, thanks and I will flash and report back :good:
-------------------------------------------------------------------------------------------
Ahh CWM, the good old days xD
Recovery was fun to use lol
ROM works beautifully on my end, no issues so far. Smooth and fast.
Good work!
Hmm, does DSP Manager work properly for anyone?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 4
Joining the party..
Sent from my SAMSUNG-SGH-T989 using Tapatalk 4
so far so good, just missing the options to disable touch keys from lighting up. Going back to 4.2.2 until mainline nightlies show up.Also lack of TWRP is upsetting.
Thanks for the work you've been doing for us!! Can't wait for a dayly driver!
The only bug I've been able to spot so far is that there is still a reboot issue when accessing the external SD card from a gallery app. I can use quickpic just fine, but once I hit the SD card folder, the phone locks up and inevitably reboots.
Other than that, this is a very good alpha build of Android 4.3! Great work TeamChopsticks!
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
The recovery link isn't working.... anyone have a mirror that isn't d-h.st?
Edit: Finally downloaded...
Edit: anyone know if advanced settings are making a come back any time soon?
Man, I feel so late joining the 4.3 party.
Anyway, just flashing the CWM for CM10.2 now. Its not TWRP but as long as I can still revert back to my nandroid backup made with TWRP in case things go wonky, I'll be fine.
So far, CM10.2 alpha builds for Hercules runs great: feels a bit smoother than 4.2 and faster.
4.3
Thanks so much for the hard work devs this is great!!!
There is a NFC wakelock issue with the latest 10.2 rom, as shown by BetterBatteryStats.
NfcService:mEeWakeLock - 87.7%
I cannot turn off NFC either.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Hero (GSM), or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Hero
Download: link
Mirror: link
MD5sum: 82efab7a2e7eb4fdd9c6257c9e8d3faa
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Downloading. Been looking forward to this.
Sweet! Can't wait for CM9, that will be amazing. I wonder if it will make its way to the Hero...
Sent from my HTC Desire HD using xda premium
sonnysoul said:
Sweet! Can't wait for CM9, that will be amazing. I wonder if it will make its way to the Hero...
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
I guess were skipping CM8?
I had some problems with GAPPS and Market working correctly at first. A reflash of the GAPPS package solved the problem. I know with some other ROMs doing a reboot between flashing the ROM and flashing GAPPS helps to avoid similar problems, so might be wise to do.
Otherwise, everything is looking good so far. I like the new lockscreen.
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
forever571 said:
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
Click to expand...
Click to collapse
After playing around with the 35 kernel, I think 29's battery drain is more reasonable.
Although the slightly performance advancing is not noticed by me...
Does this rom support a2sd+? Thanks!
is there an option to change the screen density to 140 DPI? I tried a patch from the VanillaEclair thread, but this causes a loop at the bootanimation. The circle completes one full round and then freezes, causing the animation to start over.
Any advice please?
EDIT: I'll just use LCDDensity then
Thanks for the 7.1.0 Stable, working great till now
Again having bug with video on 71-st minute!!!!!!!!!!!!
another issue i have is that the market indicates google maps is incompatible with my device...
EDIT: Seems to be related with LCDDensity. I can install it if I set it back to the default value of 160. Weird...
I have issues with SIM pin code with stable release and nightlies, does anyone have same issues here?¿?
Perdita2000
.hansie said:
another issue i have is that the market indicates google maps is incompatible with my device...
EDIT: Seems to be related with LCDDensity. I can install it if I set it back to the default value of 160. Weird...
Click to expand...
Click to collapse
Yeah, it seems the lcd change makes some apps incompatible :/
sent with love from me to you
Downloading.. Will try it! Thanks!
forever571 said:
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
Click to expand...
Click to collapse
because it's an official stable release. the .35 kernel hasn't reached official stable release yet. the .29 kernel did reach that point a long time ago.
If you want groundbreaking tech, don't use this rom. if you want stable and solid and cool stuff compared to the stock hero, use this rom.
cheers
---------- Post added at 08:10 AM ---------- Previous post was at 08:05 AM ----------
official cm roms do not come with the following hacks:
- ext based apps2sd
- dpi changing
- launchers other than the free stable version of adw
- kernels other than the current main stable kernel (which is the old .29 kernel but highly modified of course, either it is fly13 or is very similar to it)
if you want this rom but with cool addons and extra features and a sexier/faster/smoother launcher and more active xda-based support, use elelinux cm7 3.5 (or later). it's the same basic rom but with his cool UI mods, a2sd, and so on.
Elelinux is the official gsm hero cyanogenmod developer anyhow so you know you're getting the best of the best with his cm roms
But this is certainly a cool rom if you don't like ext partitions or smooth launchers. I tried it and it was solid and stable. I prefer ele's 3.5 rom though for it's extra features.
Interesting reading about how so many Heros' are affected differently.
What really surprised me was that when I installed Ele CM7-3.5.1 and doing a full wipe of all over GOku 1.3e, Ele's rom booted up with all my apps including all Google apps, right at the the first boot???? I was amazed, never having this happen to me before.
Anyway, I have tried most of the latest roms, mainly GB and Froyo but I just keep coming back to GOku 1.3e or VE6.1 because I have also found odd things happening on the other roms. They all excell at doing most of the stuff that I need from a working 'phone. These things do take time and the developers really are amazing.
VE6.1 for blazing fast and stable and GOku when I need better sound for music.
davrave said:
Interesting reading about how so many Heros' are affected differently.
What really surprised me was that when I installed Ele CM7-3.5.1 and doing a full wipe of all over GOku 1.3e, Ele's rom booted up with all my apps including all Google apps, right at the the first boot???? I was amazed, never having this happen to me before.
Anyway, I have tried most of the latest roms, mainly GB and Froyo but I just keep coming back to GOku 1.3e or VE6.1 because I have also found odd things happening on the other roms. They all excell at doing most of the stuff that I need from a working 'phone. These things do take time and the developers really are amazing.
VE6.1 for blazing fast and stable and GOku when I need better sound for music.
Click to expand...
Click to collapse
Only way that can happen is if you didn't wipe ext partition. In cwm recovery that is automatic. In amon-ra you have to do it manually every time. Although in this case it wasn't a problem since they were similar gb roms so compatibility issues didn't affect you.
Sent from my HTC Hero using Tapatalk
I had the same experience with flashing Ele's 3.5.1 over Goku's 1.3e. Apps were the same, even email was setup for hotmail. I figured I'd missed a wipe but am pretty sure I'd done it. I generally wipe twice between new roms, but perhaps I'd missed something. I use cwm every time.
dkelley said:
Only way that can happen is if you didn't wipe ext partition. In cwm recovery that is automatic. In amon-ra you have to do it manually every time. Although in this case it wasn't a problem since they were similar gb roms so compatibility issues didn't affect you.
Sent from my HTC Hero using Tapatalk
Click to expand...
Click to collapse
I so enjoy learning new things about my 'phone. Thanks DKelley. Dude, you have to be fastest typist I've seen. How do you manage the time to reply to so much stuff? Awesome
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 9.0 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 9?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info to our bug tracker:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: cm-9.0.0-KalimAz 9.0
Download: link
MD5sum: 6ab345cb54f979a92e84e59e10530f4cNight Builds can be found here: http://get.cm/?device=toroplus ChangeLog: http://changelog.bbqdroid.org/#toroplus/cm9/next
Google Apps addon:
Version: gapps-ics-20120317
Mirror: link
Mirror: link
TO MAKE A CLEAN INSTALL. LOOK HERE:
Reboot into Recovery
Make a backup ( optional to be able to go back anytime )
Wipe data/factory reset
Wipe cache partition
Then flash the Android ROM
Then flash Gapps
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
What is new:
V9.0:
Kernel is fully converted from 4.1. Be carefull, kernels from ics are not compatible with that ROM.
Options to remove sound from camera ( focus and shot )
Added an option into camera to select the time to wait after Touch top focus before the next autofocus
Torch Enabled
...
V9.1:
Repair non booting device
kalimocho is my her0
Sweet
So lemme get this straight 4.1 kernels work on this correct? Is that the only difference.
Sent from my sprint galaxy nexus
Benefits of having jellybean kernel?
Sent from my Sprint Galaxy Nexus CDMA using xda premium
drdrewdown said:
kalimocho is my her0
Click to expand...
Click to collapse
Please make a backup before install and let me know. There are some graphic changes that need to be checked on the device.
Didn't work wouldn't go past the Google screen. Fresh install with twrp. Back on my nandroid.
Sent from my sprint galaxy nexus
I can confirm it will only get as far as the Google logo, if there is any more information i can provide let me know. I was running Are-You-Jellin, backed it up. Factory Reset & Flashed Cm9-Featured & Gapps 3/17
ÜBER™ said:
Didn't work wouldn't go past the Google screen. Fresh install with twrp. Back on my nandroid.
Sent from my sprint galaxy nexus
Click to expand...
Click to collapse
drdrewdown said:
I can confirm it will only get as far as the Google logo, if there is any more information i can provide let me know. I was running Are-You-Jellin, backed it up. Factory Reset & Flashed Cm9-Featured & Gapps 3/17
Click to expand...
Click to collapse
np, let me check.
Thanks
Hey hey what do we have here?
FrostyF7 said:
Hey hey what do we have here?
Click to expand...
Click to collapse
I have removed the link since it seams to fail. I'm going to work a little bit more to make a second try
KalimochoAz said:
I have removed the link since it seams to fail. I'm going to work a little bit more to make a second try
Click to expand...
Click to collapse
I actually think it might be the fact that we were on jelly bean. It messes with things for some reason, other day i tried to odin back to stock and it didnt even work.. didnt wipe the internal like it supposed to. Later i will try to nandroid back to my ICS backup then try that and see if it works then.
Maybe they were just holding it wrong Put the link back up and let us mess with it
Take your time no one is going to rush you.
So this is for jelly bean not to ask a dumb question
Sent from my Galaxy Nexus using Tapatalk 2
So will the kernel make CyanogenMod 9 extremely smooth...like "Project Butter" smooth?????
Sent from my Galaxy Nexus using xda app-developers app
The header says "FULL JELLYBEAN KERNEL" what's the confusion here? It's for jelly bean.
†††
Delete.
Sent from my Galaxy Nexus using xda premium
I think its a kernel for cm9 not Kelly bean Cuz how it reads
Sent from my Galaxy Nexus using Tapatalk 2
Its a ROM... with a ported jelly bean kernel
Sent from my sprint galaxy nexus
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
INSTALLATION
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 10.1 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- Flash CM 10.1 zip from internal SD Card
- Flash GApps zip from internal SD Card
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM 10.1 zip to your internal SD Card
- Boot into recovery
- Flash CM10.1 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 9:
- Copy 4.2.2 GApps and CM 10.1 zip's to your SD Card
- Boot into recovery
- Flash CM 10.1 zip from SD Card
- Flash GApps zip from SD Card
- Reboot
DOWNLOAD
Click to expand...
Click to collapse
CM 10.1 official nightly builds:
http://www.get.cm/?device=d710
Google Apps:
http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z
http://changelog.bbqdroid.org/#/d710/next
DONATIONS
Click to expand...
Click to collapse
If you want to donate a few bucks for the work:
Thanks to all donators!
First! Thanks Dastin, you are the man! Now go relax with your amazing girlfriend lol.
Sent from my SPH-D710 using xda premium
Nicely done bro!
Sent from my SPH-D710 using xda app-developers app
Wait.... WHAT!
Mind.. Blown.
Sent from my SPH-D710 using Tapatalk 4
It looks like the change log is pointing to the wrong branch, shouldn't it be http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z ??
Sent from my SPH-D710 using xda premium
Well i stayed up to install it. So far so good. I was holding out on an older WFTN build one before many people started having wifi and data issues.
GPS 3G, 4G, WIfi all working well so far. Won't really know for a day or two. Can't be sure of anything but my initial impressions are good.
Whoa!! Thank you! Great Job man!
official! better late than never, amazing work dastin
Sent from my HTCONE using Tapatalk 2
=]
Congrats buddy, Good job. But i don't get why i cant find it under devices on the cya site?
Edit: Did any drastic changes or anything really change from unofficial? JB modems do work with 4g ONLY no 3g support
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
thanks for getting our phone recognized....Finally!!! Great job bro!
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
=]
Thanks, i didn't see it in op to not use a modem and i thought that was the requirement for it to become a CM official rom.
elzero26 said:
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
Click to expand...
Click to collapse
woooo
JB modems do work. proof is in the pudddin (4g only)
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
papertown11 said:
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
Click to expand...
Click to collapse
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
All up to dastin for sure. I don't know why he'd wanna start adding tweaks and halos and stuff when he was going for pure and clean before but if he wants to start dabbling with wftn like that he can but as he always says he doesn't have much time so i figured he'd pretty much drop it and move on to full support of this i may be wrong but hell be the only one to answer it.
gg_99 said:
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
Click to expand...
Click to collapse
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
=]
I've actually set up fresh 3 times and it works perfect for me . Do your standard wipe factory/ wipe dev cash then reload gapps and you should be fine. Load a gb modem too you should be gtg
sol_671 said:
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.