CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Galaxy Note 10.1 LTE I925, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
DOWNLOADS
CM10.2 official nightly builds:
http://www.get.cm/?device=i925
Google Apps:
http://goo.im/gapps
CHANGELOG
http://changelog.bbqdroid.org/#i925/cm10.2/next
BUG LIST
-GPS may or may not work
-BT Voice Search
-5ghz wifi - seems to only work with low channels
-Minor graphical issues (occasional black screen)
TEAMHACKSUNG SUPPORT CHAT
Webchat: http://webchat.freenode.net/?channel...cksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Deleted
Sent from my SPH-L710 using Tapatalk 2
So I installed the jailbreak a few months back and have been waiting eagerly for a ROM and searching around... but from what I have read, the sch-i925 version note 10.1 doesn't have the same partitions as other 10.1's, so I haven't found a ROM for it.
What confuses me is that people seem to be returning back to stock... and in the first line of the instructions of this ROM I find:
First time installing CyanogenMod 10.2 to your Galaxy Note 10.1 LTE I925, or coming from another ROM:
Click to expand...
Click to collapse
So... what other ROM?? How did I miss that?
I'm super happy that I finally find a ROM for this tablet, but why now a few day's after the first post of this great news... why I'm the first posting here?? Nobody else jumping out of their seats in joy??
Also, I'm curious... does the CM include phone capabilities? I'm in Iceland and the Icelandic version of this tablet is basically just a very large phone, I'm hoping this ROM will get me there since now I cant even use the mobile networks at all because I have no Verizon SIM and even if I did - it would be ridiculously expensive
I'm looking forward to testing this out, will post my results
Snarlster said:
So I installed the jailbreak a few months back and have been waiting eagerly for a ROM and searching around... but from what I have read, the sch-i925 version note 10.1 doesn't have the same partitions as other 10.1's, so I haven't found a ROM for it.
What confuses me is that people seem to be returning back to stock... and in the first line of the instructions of this ROM I find:
So... what other ROM?? How did I miss that?
I'm super happy that I finally find a ROM for this tablet, but why now a few day's after the first post of this great news... why I'm the first posting here?? Nobody else jumping out of their seats in joy??
Also, I'm curious... does the CM include phone capabilities? I'm in Iceland and the Icelandic version of this tablet is basically just a very large phone, I'm hoping this ROM will get me there since now I cant even use the mobile networks at all because I have no Verizon SIM and even if I did - it would be ridiculously expensive
I'm looking forward to testing this out, will post my results
Click to expand...
Click to collapse
there aren't many users of the i925 which is why there haven't been lots of responses. And yes it is setup as a large phone but for verizon.
Sent from my SCH-I605 using xda app-developers app
there aren't many users of the i925 which is why there haven't been lots of responses. And yes it is setup as a large phone but for verizon.
Click to expand...
Click to collapse
Do you mean it includes the phone app, but somehow is still limited to Verizon?? If its a new ROM, why is it still locked to a certain carrier??
So I was about to install CWM when I got into trouble connecting detecting the tablet with both heimdall and odin. Adb detects the device... perhaps a driver issue because of ADB... perhaps it doesnt matter
I booted into recovery only to find the TWRP that I haven't used yet, it came when I installed adams jailbreak. Im not familiar with TWRP but it looks pretty good. Do I need to install CWM or is TWRP good enough??
*edit: No problem connecting to ODIN on a different computer, so now I can install CWM if needed.
Could you let me know if I can use the TWRP recovery instead of the CWM?
Also, did you mean that this ROM is locked to Verizon mobile network?
Snarlster said:
Could you let me know if I can use the TWRP recovery instead of the CWM?
Also, did you mean that this ROM is locked to Verizon mobile network?
Click to expand...
Click to collapse
I believe this rom is specifically for the verizon version of the n8020. There is a port for the international version.
smegg said:
I believe this rom is specifically for the verizon version of the n8020. There is a port for the international version.
Click to expand...
Click to collapse
I also believe that this rom is specifically for the verizon version of the n8020 (the sch-i925). I have the Verizon SCH-i925 Samsung Galaxy Note 10.1 which is a LTE version. So this rom should fit pretty well I dont believe I can use the n8020 ROM's because of some different partitions from what I have read.
Can I install this rom with TWRP recovery or is CWM a prerequisite?
I didn't quite understand your reply, even if the Rom is designed specifically for this tablet, that does not mean it is still locked to the network provider. Is it still locked?
Thanks again, cant wait to try it
Snarlster said:
I also believe that this rom is specifically for the verizon version of the n8020 (the sch-i925). I have the Verizon SCH-i925 Samsung Galaxy Note 10.1 which is a LTE version. So this rom should fit pretty well I dont believe I can use the n8020 ROM's because of some different partitions from what I have read.
Can I install this rom with TWRP recovery or is CWM a prerequisite?
I didn't quite understand your reply, even if the Rom is designed specifically for this tablet, that does not mean it is still locked to the network provider. Is it still locked?
Thanks again, cant wait to try it
Click to expand...
Click to collapse
cwm is just recommended for official cm builds but twrp should work. and no its not locked onto verizon it is just designed for it. moving it to another carrier would require slight modification
Sent from my SCH-I605 using xda app-developers app
So the install went great - No problems with TWRP, ROM or Gapps... smooth sailing!
The only changes to the tablet prior to this install was following Adams guide on how to unlock the bootloader. I also had not installed any updates from Verizon.
The ROM I installed was the cm-10.2-20130904-NIGHTLY-i925.
I also didn't install CWM, the TWRP that i got from unlocking the bootloader worked just fine.
Here is the bug list:
The Bug List:
1. GPS is working just fine.
2. I haven't tried the BT voice search.
3. 5ghz WIFI not working - I also needed to reboot to get 2.4ghz working again
4. No graphical issues yet, I test played raging thunder racing game and no problems there at least.
Other Bugs:
Camera:
No camera app found. I installed Nexus camera from market but it gave an error: "Can't connect to the camera". Also, my flashlight app can not use the camera flash.
I noticed that in folder /root/sys/class/camera/ there is only two documents "front" and "rear" which are both empty 0.00B files. Was looking for the cause, perhaps this helps?
Mobile network *Edit: Not a problem anymore:
In order to search for networks, the APN needs to be configured first! I am using my normal phone Icelandic SIM now and can use 3G in here in Iceland, send texts and after downloading a dialer I can now make phone calls also
Besides that, the OS is working great... 4.3 is pretty cool Its a real bust that the camera isn't working, I hope that gets fixed since its the only downside of this upgrade.
I'll keep a watch on this forum, so let me know if I can send you any info about my install. I'll also keep an eye on the upgrades and report if my problems get solved
Thanks for this ROM
Snarlster said:
So the install went great - No problems with TWRP, ROM or Gapps... smooth sailing!
The only changes to the tablet prior to this install was following Adams guide on how to unlock the bootloader. I also had not installed any updates from Verizon.
The ROM I installed was the cm-10.2-20130904-NIGHTLY-i925.
I also didn't install CWM, the TWRP that i got from unlocking the bootloader worked just fine.
Here is the bug list:
The Bug List:
1. GPS is working just fine.
2. I haven't tried the BT voice search.
3. 5ghz WIFI not working - I also needed to reboot to get 2.4ghz working again
4. No graphical issues yet, I test played raging thunder racing game and no problems there at least.
Other Bugs:
Camera:
No camera app found. I installed Nexus camera from market but it gave an error: "Can't connect to the camera". Also, my flashlight app can not use the camera flash.
I noticed that in folder /root/sys/class/camera/ there is only two documents "front" and "rear" which are both empty 0.00B files. Was looking for the cause, perhaps this helps?
Mobile network *Edit: Not a problem anymore:
In order to search for networks, the APN needs to be configured first! I am using my normal phone Icelandic SIM now and can use 3G in here in Iceland, send texts and after downloading a dialer I can now make phone calls also
Besides that, the OS is working great... 4.3 is pretty cool Its a real bust that the camera isn't working, I hope that gets fixed since its the only downside of this upgrade.
I'll keep a watch on this forum, so let me know if I can send you any info about my install. I'll also keep an eye on the upgrades and report if my problems get solved
Thanks for this ROM
Click to expand...
Click to collapse
camera had worked up until a few days ago an opensource camera hal replaced the camera wrapper. I haven't made the change to build the oss camera yet as only the front cam works with it. I'm working on getting them both functional.
Sent from my SCH-I605 using xda app-developers app
sbrissen said:
camera had worked up until a few days ago an opensource camera hal replaced the camera wrapper. I haven't made the change to build the oss camera yet as only the front cam works with it. I'm working on getting them both functional.
Click to expand...
Click to collapse
Great, cant wait to see whats to come!
Would I then perhaps be better set with a camera by taking an older rom, 1st of September for example?
Snarlster said:
Great, cant wait to see whats to come!
Would I then perhaps be better set with a camera by taking an older rom, 1st of September for example?
Click to expand...
Click to collapse
Yes
Sent from my GT-N5110 using xda app-developers app
sbrissen said:
Yes
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Installed the september 1st ROM and now I have camera
Snarlster said:
Installed the september 1st ROM and now I have camera
Click to expand...
Click to collapse
How would I find the Sept 1 nightly? http://www.get.cm/?device=i925&type= no longer has the link.
jraskal said:
How would I find the Sept 1 nightly? http://www.get.cm/?device=i925&type= no longer has the link.
Click to expand...
Click to collapse
Good question, I'm glad I downloaded all of them, I suspected they might only have space for 5 there! Just wait a second, I'll google this for you.
Sorry for the wait, it was only a minute though... but I found this for you:
http://goo.im/devs/cm/i925/nightly
I guess I didn't need to download all of them after all. By the way, September 2 worked better than September 1 so Im using that now.
Im going to check the 8th of sept ROM tonight... perhaps its all fixed there, will report
I've got the latest 9/9 nightly flashed on my i925 and don't see an option to add APN's nor make calls.
Can I just download any Dialer from the market and calling will work?
My intention is to test it with the AT&T $35 month prepaid plan, but I hear already that supposedly Medianet Internet doesn't work.
If that doesn't pan out, I'm going to be trying a Staight Talk AT&T sim.
*EDIT* I downloaded Dialer One and that seems to work
@Snarlster, how did you edit the APN for data?
TBH I think so far the features of stock are more rich
jraskal said:
I've got the latest 9/9 nightly flashed on my i925 and don't see an option to add APN's nor make calls.
Click to expand...
Click to collapse
It should be found in Settings--> More--> Mobile networks--> Access Point Names
how did you edit the APN for data?
Click to expand...
Click to collapse
You need to create an APN in "Access Point Names". (press + sign at top right)
You should only needed to set the Name (You create name) + APN (supplied by provider), here in Iceland they provide this information on their webpage.. can be fine to add more settings but this is the minimum (at least here).
*remember to save, I missed it at least the first time but you got to press the 3 dots in top right and press save.
After that, search for networks, if error then restart and search for networks again.
Can I just download any Dialer from the market and calling will work?
*EDIT* I downloaded Dialer One and that seems to work
Click to expand...
Click to collapse
Yes Im pretty sure any dialer works, there's lots to choose from.
My intention is to test it with the AT&T $35 month prepaid plan, but I hear already that supposedly Medianet Internet doesn't work.
If that doesn't pan out, I'm going to be trying a Staight Talk AT&T sim.
Click to expand...
Click to collapse
Good luck with that, I just threw my work phone's SIM card in the tablet, dont use the phone that much so it was perfect, now I have a work tablet instead of a work phone... but I can receive and make phonecalls and texts, I'll just have to find that blootooth earpiece I have somewhere and that should be perfect
TBH I think so far the features of stock are more rich
Click to expand...
Click to collapse
I prefer this look, the main thing is to get all that Verizon crap out and to finally have control over this thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't seem to have the option to add APN's. I could do it on stock
Sent from my SCH-I925 using Tapatalk 4
Related
Sorry for the long delay. I inally have everything sorted out and the temperatures finally cooled down enough that the random brownouts have stopped. Lots of new things in this release. I suck with changelogs and the way I built this rom makes it hard to know everything that's changed. I rescripted Maniac103's Defy repo for the Bravo and am now using that as my base. Before I was updating a cloned Quarx CM7 repo with cherrypicks from Maniac's and FuZZ's Defy repos..
Some new features include
Bootmenu Pin Protection
Wifi Calling (untested)
SmartassV2 replaces Smartass, conigure it with smartass's settings in the bootmenu
Voice Commands
More Tablet Mode Features, you'll see them
New FM Radio
Nuance Bluetooth Voice Dialer
My Github
https://github.com/skeevy420
Install Instructions When Coming From Other Roms
-Root, Enable Non Market Apps, Install Defy 2nd-init (Search Forum For More Help)
-Reboot into Recovery
-Select Wipe Data\Factory Reset
-Select Install Zip from SDCard
-Find and Select the Rom you just downloaded
-Flash It
-Select Install Zip from SDCard
-Find and Select Gingerbread Gapps
-Flash It
-Reboot:victory:
Updating From A Previous Kang Instructions
-Reboot into Recovery
-Select Install Zip from SDCard
-Find and Select the Rom you just downloaded
-Flash It
-Reboot:victory:
Wiping Cache and Wiping Dalvic Cache isn't necessary since I added those commands to the installer script. Adding those commands makes updating simpler, less prone to errors, and less presses of the volume and power buttons.
I need to look in touch recovery and touch bootmenu.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: The Launcher in the screenshot is Holo Launcher Plus. There is a free version available in the market that works well. The Live Wallpaper is Hydra Galaxy (modified to save battery) from Galaxy Pack. Try Ice Galaxy for a free alternative from the same dev.
Download CM7 Here
NOTES & BUGS:
I've sometimes had an issue where my pc won't connect to adb since the phone won't give permission. It usually only occurs after the first 2 or 3 boots then magically fixes itself. I've also had usb data tethering fix the adb problem. If you don't use adb on your pc, then this isn't even an issue for you.
Get Previous Versions Here
The attachment is for josuearisty -- no one else needs to download it or use it -- this was just a quick place to upload it for him
CM7 Mods
Just a couple of mods I use with CM7.
Bravia Engine - Sony Image PP engine for sharper images.
Beats Audio - Sony Audio engine with improved bass and treble -- can harm inferior and crappy headphones and speakers (Trust Me).
All the zips are flashable in recovery.
Credits for the zips go to their original makers, which I can't remember since I downloaded them a few months ago and can't find the threads I found them in (somewhere here at xda).
Skeevy your rom is lightning fast! Thanks so much! Thanks for beats audio and bravia zips too!
Sent from my MB520 using xda
Hey skeevy420 can you give me a link to the older build for some reason no matter which baseband I try on the July 13th build I can't get 3G/H on my network
from my MB520 using xda app-developers app
EDIT: ah nvm ill just be using the jelly bean rom in the mean while
skeevy420 said:
Also, does anybody here use the stock filemanager? I know I don't; I can remove it and replace it with Apoonet's Miui File Explorer so we'd have a free, root, and feature filled file explorer by default.
Click to expand...
Click to collapse
I use ES file explorer, but basically I use any file manager with root access.
I've been using this one for a few days and haven't found any bugs. Pretty sure this is the most stable rom I've had on my phone.
Another thinh I've noticed is I can't tell if the bravia engine is working. I know it is supposed to produce clearer images, but I don't notice a difference. Oh well, this phone doesn't have a fantastical camera anyway.
Sent from my MB520 using xda app-developers app
ccdsatt said:
Hey skeevy420 can you give me a link to the older build for some reason no matter which baseband I try on the July 13th build I can't get 3G/H on my network
from my MB520 using xda app-developers app
EDIT: ah nvm ill just be using the jelly bean rom in the mean while
Click to expand...
Click to collapse
http://www.mediafire.com/?mand0d3vvpnozfb
Dr. Orange said:
I use ES file explorer, but basically I use any file manager with root access.
I've been using this one for a few days and haven't found any bugs. Pretty sure this is the most stable rom I've had on my phone.
Another thinh I've noticed is I can't tell if the bravia engine is working. I know it is supposed to produce clearer images, but I don't notice a difference. Oh well, this phone doesn't have a fantastical camera anyway.
Sent from my MB520 using xda app-developers app
Click to expand...
Click to collapse
I was just thinking of swapping it out with Apoonet's Miui File Explorer -- Free, Root, Advanced Features, Auto-Updates itself, No Crappy Permissions.
Glad to here it works great for more than myself.
The only way I could tell if Bravia was working was I took picture of my dog with the Bravo's camera and dl'd a HD image, started at each of them for minutes on end each, flashed bravia, stared again. They did improve, but not by much and I doubt anyone would notice the difference unless you did the stare test like I did.
thanks skeevy
skeevy420 said:
http://www.mediafire.com/?mand0d3vvpnozfb
I was just thinking of swapping it out with Apoonet's Miui File Explorer -- Free, Root, Advanced Features, Auto-Updates itself, No Crappy Permissions.
Glad to here it works great for more than myself.
The only way I could tell if Bravia was working was I took picture of my dog with the Bravo's camera and dl'd a HD image, started at each of them for minutes on end each, flashed bravia, stared again. They did improve, but not by much and I doubt anyone would notice the difference unless you did the stare test like I did.
Click to expand...
Click to collapse
I have no preference in explorer so whatever you put that is not stock I'll gladly use. Although I can't speak for everyone else.
I flashed the latest cm10 just to try it out, but it's still early and I noticed quite a few bugs. I'll probably be sticking with your kang(s) for a while.
Sent from my MB520 using xda app-developers app
Help please
Hi. Im a newbie at all this installing rom stuff. I am trying to install this rom, but omited to download and place the gingerbread gaaps on my sd card before the process...
so now I am stuck in this step
-Find and Select Gingerbread Gapps
-Flash It
-Reboot
Should I turn it off and put the gaaps in there, and then restart it? Please help!
Just as a fallow up the way I solved this issue thanks to other forum members help was: turn off my phone, and install the gaaps to the sd card, to unzip them later.
PC Crashed
Not gonna be a CM7 this week, or anything else for that matter. My pc went down Thursday and I finally had the time today to get it back up and running. Still have to finish configuring everything how I like it, install all the build requirements, sync all my repos again (takes a while), and much more. My biggest problem is I might lose a lot of my Android stuff on my old encrypted home folder. Need to look into accessing an encrypted home folder when you don't have the password anymore. Like a dumbass, I stored it in my Documents folder....instead of anywhere on one of my other 3 hard drives.
I'll look into the baseband issue. I think I just need to add in the missing folders and files under /etc/motorola that the new baseband switcher uses.
Maniac had quite a few CM7 updates last week, and that's always good.
Hopefully I'll be back in business by Monday.
//If you're wanting to try out Linux, I gotta recommend Mint 13 Xfce to ya. The install is painless and the system's ran good and stable so far. One of my best Linux experiences.
skeevy420 said:
Not gonna be a CM7 this week, or anything else for that matter. My pc went down Thursday and I finally had the time today to get it back up and running. Still have to finish configuring everything how I like it, install all the build requirements, sync all my repos again (takes a while), and much more. My biggest problem is I might lose a lot of my Android stuff on my old encrypted home folder. Need to look into accessing an encrypted home folder when you don't have the password anymore. Like a dumbass, I stored it in my Documents folder....instead of anywhere on one of my other 3 hard drives.
I'll look into the baseband issue. I think I just need to add in the missing folders and files under /etc/motorola that the new baseband switcher uses.
Maniac had quite a few CM7 updates last week, and that's always good.
Hopefully I'll be back in business by Monday.
//If you're wanting to try out Linux, I gotta recommend Mint 13 Xfce to ya. The install is painless and the system's ran good and stable so far. One of my best Linux experiences.
Click to expand...
Click to collapse
Hope you get back soon, these cm7 builds are great!
When will you build jelly bean roms?
josuearisty said:
Hope you get back soon, these cm7 builds are great!
When will you build jelly bean roms?
Click to expand...
Click to collapse
Just accessed my old encrypted home, copying all my files to another drive. Then I'm gonna format it and make it my android partition. Should be back in the game soon.
I'll make jellybean roms as soon as I can get it to start compiling....especially since Salad Bar, Paranoid Android, and other cool mods are switching to jb. CM7's gonna come first, but I'll get to jb during the next week.
skeevy420 said:
Just accessed my old encrypted home, copying all my files to another drive. Then I'm gonna format it and make it my android partition. Should be back in the game soon.
I'll make jellybean roms as soon as I can get it to start compiling....especially since Salad Bar, Paranoid Android, and other cool mods are switching to jb. CM7's gonna come first, but I'll get to jb during the next week.
Click to expand...
Click to collapse
Don't work too hard! We can't thank you enough for what you do!
Dr. Orange said:
Don't work too hard! We can't thank you enough for what you do!
Click to expand...
Click to collapse
Woop, recovered all my Android files. I'm so glad I didn't lose all of it. I'd of had suicide level depression if I didn't. Especially since I had to look long and hard for the right tools to do the job (that's what she said). Time to format my old system partiton with a 20 gb recovery partition with tons of recovery tools and another partition for android development.
Then its time to set up my build environment. That'll take a while. The sdk alone is about a 1 hr ordeal, the CM7 sync is anther 1.5-2 hrs, CM9 is about a 45 min sync, the app install for everything is another 30 mins. And all those times are in a perfect world with maxed out dl speeds.
About done with all my sysyem themeing. I prefer a black desktop since its much easier staring at a dark 42" screen over a bright one for hours on end, and its eaisre to read. See the screenshot to see what I'm talking about
Also gonna look into adding aroma to the CM7 Kangs. I thought about making a lightweight rom with update zips for full CM, but Aroma will let us choose what system apps you don't want, allow easy modding and tweaks. If done right, it'll give the Kangs full White Rabbit customization without me having to port WR.
skeevy420 said:
Woop, recovered all my Android files. I'm so glad I didn't lose all of it. I'd of had suicide level depression if I didn't. Especially since I had to look long and hard for the right tools to do the job (that's what she said). Time to format my old system partiton with a 20 gb recovery partition with tons of recovery tools and another partition for android development.
Then its time to set up my build environment. That'll take a while. The sdk alone is about a 1 hr ordeal, the CM7 sync is anther 1.5-2 hrs, CM9 is about a 45 min sync, the app install for everything is another 30 mins. And all those times are in a perfect world with maxed out dl speeds.
About done with all my sysyem themeing. I prefer a black desktop since its much easier staring at a dark 42" screen over a bright one for hours on end, and its eaisre to read. See the screenshot to see what I'm talking about
Also gonna look into adding aroma to the CM7 Kangs. I thought about making a lightweight rom with update zips for full CM, but Aroma will let us choose what system apps you don't want, allow easy modding and tweaks. If done right, it'll give the Kangs full White Rabbit customization without me having to port WR.
Click to expand...
Click to collapse
Excellent, hope you get on the road very very soon
Problems logging in to google account
Hi. I instaled this on one of my phones and everything is perfect, however, with my other Bravo, Im gaving problems because I get: cant establish a reliable data connection to the server... and I can never log in to google... any ideas? I have already tried clearing cache, and resintalling everyting from scratch, to no avail. and I know google is not down because I can creat and log into another account with my other bravo.
marcelarr said:
Hi. I instaled this on one of my phones and everything is perfect, however, with my other Bravo, Im gaving problems because I get: cant establish a reliable data connection to the server... and I can never log in to google... any ideas? I have already tried clearing cache, and resintalling everyting from scratch, to no avail. and I know google is not down because I can creat and log into another account with my other bravo.
Click to expand...
Click to collapse
Try using static IP.
In wifi settings press menu>advanced>use static ip.
Trata de usar una estatica!
josuearisty said:
Try using static IP.
In wifi settings press menu>advanced>use static ip.
Trata de usar una estatica!
Click to expand...
Click to collapse
Tried it... it does not work! Ive been looking for threads on this all morning...
did the airplane mode and wifi on ... didnt work
tried signing in with youtube
tired reinstalling and wiping cache and didnt work either...
Is there any way I can go back to the stock motorola rom...
marcelarr said:
Tried it... it does not work! Ive been looking for threads on this all morning...
did the airplane mode and wifi on ... didnt work
tried signing in with youtube
tired reinstalling and wiping cache and didnt work either...
Is there any way I can go back to the stock motorola rom...
Click to expand...
Click to collapse
Goto to this thread:
http://forum.xda-developers.com/showthread.php?t=1559109
Download files and follow instructions.
josuearisty said:
Goto to this thread:
http://forum.xda-developers.com/showthread.php?t=1559109
Download files and follow instructions.
Click to expand...
Click to collapse
THanks... will do... just to let you know this second phone has always given me some sort of problem.... I had trouble when I rooted it because, the enable non market app would never stay that way. When I first enabled non market apps with superoneclick I could install no market apps. But after some time when by when I tried to install a non market app it kept telling me that I couldn't so I had to enable non market apps again. I thought that was weird, because device number 1 never gave me those issues. Anyway, on device number 1 everything from kangs cm7 worked...
As a followup to this problem, I tried connecting to Google on another wifi hotspot and it worked... I guess the settings of my IP are somehow incorrect at home, does anyone have any idea on what the correct settings should be... I can connect to Google at home once Im signed in from another IP.
Just wondering if this could be due to a CM7 issue because It never happened when my phone was in stock rom.
Also... I cannot purchase apps when connected to the wifi at home... I have to go somewhere else...
Hi All,
This is a partial port attempt of latest ubuntu touch 14.04 on our d2att (http://www.ubuntu.com/phone).
Because this port is not fully completed, I prefered to release a multiboot version (multiboot v2.11 needed http://forum.xda-developers.com/showthread.php?t=2684052 ).
If you are not familiar wtih multiboot, please check how to use it before testing this rom ( or watch videos examples here : http://www.youtube.com/channel/UCefO8F4YX6qMQsqpBHTqTqQ)
When you install this ROM with multiboot, you will have to choose img format only and at least 2.5G for data parition.
Features ( tested only on my Bell carrier d2att ) :
Graphics : OK
Cellular Radio : OK
Wireless network OK
Touch OK
Suspend/Resume OK
Rotation : OK
Phone OK
Audio OK
Boot process : ~OK
Camera OK (since v0.12 )
Battery : ~OK ( but value printed is 1/3 of the real one )
volumes buttons : OK
GPS : very partial ( position tracking only working with test_gps command line )
Bluetooth : unknown ( but started ) - has to be tested with a headset
All others features are not working (not yet studied nor tested)
Important recommandations to install this ROM under multiboot :
img file only - install on external sdcard recommended
count ~30 mn to install an external sd ( ~15 mn to create rom and 15 mn to install rom )
80M for system, 2.5G for data, 20M for cache
first reboot can take 2 minutes, be patient. After more than 2 minutes, press on/off button, it is possible that the phone is put in pause
cell can take 2 minutes to come UP.
sometimes boot does not work, the device reboot after timeout on main rom. Reboot to recovery and just try a second time. This happen especially if installed on internal sdcard, that's why I recommended an installation on external.
Note : did not find a reboot option : to reboot, I press ~3s power button until screen turns off, then release button and wait first vibration. At first vibration, usual technique to jump to recovery
Download links : http://www.androidfilehost.com/?w=files&flid=13392
New version 0.2 : http://www.androidfilehost.com/?fid=23329332407586924
small installation example ( installation time has been cutted for 3/4 mn) :
Philippe,
First! Looks awesome!
Edit: Sorry, always wanted to do that.
Phil_Suz said:
Hi All,
This is a partial port attempt of latest ubuntu touch 14.04 on our d2att (http://www.ubuntu.com/phone).
Because this port is not at all for a daily use, I prefered to release a multiboot version (multiboot v2.11 needed http://forum.xda-developers.com/showthread.php?t=2684052 ).
If you are not familiar wtih multiboot, please check how to use it before testing this rom ( or watch videos examples here : http://www.youtube.com/channel/UCefO8F4YX6qMQsqpBHTqTqQ)
When you install this ROM with multiboot, you will have to choose img format only and at least 2G for data parition.
Features ( tested only on my Bell carrier d2att ) :
Graphics : OK
Cellular Radio : OK
Wireless networkOK
TouchOK
Suspend/ResumeOK
Rotation : OK
Boot process :~OK
Phone Partial*
SoundPartial*
*earphone not working for the moment ( but headsets, micro and speakers seem to work ).
*During call, if no headsets are plugged, audio exits from speakers (not good...)
All others features are not working (not yet studied nor tested)
Camera
GPS
Bluetooth
Buttons (except on/off)
etc...
Process to install this ROM under multiboot :
- img file only - install on external sdcard recommended
- 80M for system, 2G for data, 20M for cache
- first reboot can take 2 minutes, be patient. After more than 2 minutes, press on/off button, it is possible that the phone is put in pause
- cell can take 2 minutes to come UP.
- sometimes boot does not work, the device reboot after timeout on main rom. Reboot to recovery and just try a second time. This happen especially if installed on internal sdcard, that's why I recommended an installation on external.
- If you want to use phone, please plug a headset.
Note : did not find a reboot option : to reboot, I press ~3s power button until screen turns off, then release button and wait first vibration. At first vibration, usual technique to jump to recovery
download link : http://www.androidfilehost.com/?fid=23329332407583338
small installation example ( installation time has been cutted for 3/4 mn) :
Philippe,
Click to expand...
Click to collapse
Do you need to flash the cm 10 rom first or just the trusty zip by its self
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
kalel420 said:
Do you need to flash the cm 10 rom first or just the trusty zip by its self
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi kalel420, the zip contains everything ( cm10 base and trusty ), so you just have to flash this zip. You can also check the video to follow installation process.
Philippe,
Hi, I'm codemonkey98 from the other thread discussing multiboot. I am very interested in work, so interested that I mentioned you in the /r/GalaxyS3 subreddit on Reddit. The following thread that I posted can be found below:
[d2att] [ROM] [PORT] Ubuntu Touch 14.04 trusty - for multiboot by /u/Nickolaus
I hope you do not mind me simply spreading the word about you. If you do, I will kindly delete the post.
~~~~~
That aside, may I ask how you're going to go about installing this? I do not have multiboot on my phone yet, but do I simply flash that .zip file for multiboot within my recovery and then walla?
codemonkey98 said:
Hi, I'm codemonkey98 from the other thread discussing multiboot. I am very interested in work, so interested that I mentioned you in the /r/GalaxyS3 subreddit on Reddit. The following thread that I posted can be found below:
[d2att] [ROM] [PORT] Ubuntu Touch 14.04 trusty - for multiboot by /u/Nickolaus
I hope you do not mind me simply spreading the word about you. If you do, I will kindly delete the post.
~~~~~
That aside, may I ask how you're going to go about installing this? I do not have multiboot on my phone yet, but do I simply flash that .zip file for multiboot within my recovery and then walla?
Click to expand...
Click to collapse
Hi codemonkey98, no prob for reddit.:good:
If you plan to install this rom on your main internal, even if I strongly do not recommand it, install should be working (has to be confirmed).
I don't recommand it not only because it is not fully fonctionnal but mainly because reboot process is not good at all.
Philippe,
Phil_Suz said:
Hi codemonkey98, no prob for reddit.:good:
If you plan to install this rom on your main internal, even if I strongly do not recommand it, install should be working (has to be confirmed).
I don't recommand it not only because it is not fully fonctionnal but mainly because reboot process is not good at all.
Philippe,
Click to expand...
Click to collapse
I was actually going to install it on my external SD card. So was I right about the TWRP part? I can simply flash the multiboot zip from your multiboot thread within my TWRP recovery?
Phil_Suz said:
Hi kalel420, the zip contains everything ( cm10 base and trusty ), so you just have to flash this zip. You can also check the video to follow installation process.
Philippe,
Click to expand...
Click to collapse
Is the any way you can add support for the MJ2 bootloader I got a unsupported bootloader error when trying to install
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
codemonkey98 said:
I was actually going to install it on my external SD card. So was I right about the TWRP part? I can simply flash the multiboot zip from your multiboot thread within my TWRP recovery?
Click to expand...
Click to collapse
Yes, you install "d2att-twrp2.7-mb-v2.11.zip" from your actual recovery (twrp or cwm), then reboot to recovery to get twrp with multiboot.
kalel420 said:
Is the any way you can add support for the MJ2 bootloader I got a unsupported bootloader error when trying to install
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hum, this is CM10.1 base which check this. To fix it, you will have to modify updater-script in zip file.
open zip file (with winrar for example), extract META-INF\com\google\android\updater-script, edit it and replace for example on line 2 "I747UCDLK3" by your bootloader version. and replace this file.
[edit] will upload version 0.12 without modem version checking.
[edit2] version 0.12 is quite ready with another function just fixed now : camera
Philippe,
Phil_Suz said:
edit] will upload version 0.12 without modem version checking.
[edit2] version 0.12 is quite ready with another function just fixed now : camera
Philippe,
Click to expand...
Click to collapse
Have you been able to fix the power button? I'm honestly contemplating on making this as my stable ROM for ****s and giggles. I do have a question however, whenever I was creating a ROM in my external SD card, it took a very LONG time for it to backup. I let it sit and it never finished so I just shut it off.
Congrats on the port. I tried it out, had to add a line in metadata and the updater script for the Canadian bootloader so that it was able to flash. It works like advertised....
kalel420 said:
Is the any way you can add support for the MJ2 bootloader I got a unsupported bootloader error when trying to install
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
v0.12 uploaded wich fix this problem and fix camera too.
codemonkey98 said:
Have you been able to fix the power button? I'm honestly contemplating on making this as my stable ROM for ****s and giggles. I do have a question however, whenever I was creating a ROM in my external SD card, it took a very LONG time for it to backup. I let it sit and it never finished so I just shut it off.
Click to expand...
Click to collapse
I think best way to make a clean poweroff/reboot will be to write small qml program.
Installation on external sdcard is long : ~15 minutes for rom creation and again 10-15 min for installation (on my sdcard)
If you get problem on sdcard, just try temporarly on internal sdcard ( check the video on first message ).
Philippe,
I was able to flash this tonight, and I must say I'm pressed how far you've gotten with this port. Obviously it's sluggish, but that's to be expected. Honestly, I'm just shocked.
~~~~~
Edit #1 If you are wanting your Google Contacts, you should be able to do this:
Code:
adb shell
sudo -u phablet -i
syncevolution --configure --sync-property "[email protected]" --sync-property "password=secret" Google_Contacts
syncevolution --sync refresh-from-server Google_Contacts addressbook
If you have 50 or more contacts you'll also have to do this:
Code:
syncevolution --sync one-way-from-server Google_Contacts addressbook
There's also an application that can be used to import Google contacts as well. This application can be found here.
Edit #2 The default password for the account Phablet is phablet if I'm not mistaken.
DexedrineXR said:
Congrats on the port. I tried it out, had to add a line in metadata and the updater script for the Canadian bootloader so that it was able to flash. It works like advertised....
Click to expand...
Click to collapse
codemonkey98 said:
I was able to flash this tonight, and I must say I'm pressed how far you've gotten with this port. Obviously it's sluggish, but that's to be expected. Honestly, I'm just shocked.
Click to expand...
Click to collapse
Hi Dexedrine and codemonkey98, thank's to give feedbacks.:good:
Thanks also codemonkey for those tips. Concerning reponsiveness of the rom, I found it quite good in my case.
Also, I successfully fixed the very annoying problem of audio during calls (exiting from speaker and not earphone) . Now we can call in public
Version0.13 is coming up.
Philippe,
Phil_Suz said:
Hi Dexedrine and codemonkey98, thank's to give feedbacks.:good:
Thanks also codemonkey for those tips. Concerning reponsiveness of the rom, I found it quite good in my case.
Also, I successfully fixed the very annoying problem of audio during calls (exiting from speaker and not earphone) . Now we can call in public
Version0.13 is coming up.
Philippe,
Click to expand...
Click to collapse
You sure you haven't had any issues with the response on this port? Because I have, but like I said, that is to be expected in ports and alpha ROMs.
Concerning the tips I gave, I was honestly trying to find a way of inserting my contacts from my GMail account onto my phone. It appears using the Terminal is the best way as for now, or you could use the application I posted about. Other than that, this ROM really has been great dude. I am surprised to see how stable it is.
~~~~~
I didn't bother testing the audio issue you had mentioned because I don't receive many calls in general. However it is great to hear that you got that resolved. I'll be sure as well to flash the update when that gets uploaded for us.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
codemonkey98 said:
You sure you haven't had any issues with the response on this port? Because I have, but like I said, that is to be expected in ports and alpha ROMs.
Concerning the tips I gave, I was honestly trying to find a way of inserting my contacts from my GMail account onto my phone. It appears using the Terminal is the best way as for now, or you could use the application I posted about. Other than that, this ROM really has been great dude. I am surprised to see how stable it is.
~~~~~
I didn't bother testing the audio issue you had mentioned because I don't receive many calls in general. However it is great to hear that you got that resolved. I'll be sure as well to flash the update when that gets uploaded for us.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
For sure, external roms are a bit less fast than main internal but not that much. Ubuntu touch use Mir/Libhybris for graphical acceleration so graphics are very good (very small overhead). I did not tried a lot of apps, but did not feel slow responses. Is it general slow behaviour or for specific actions ? Maybe also, your external card is perhaps a bit slow.
Version 0.13 with audio/phone fix has been uploaded and available in first post. I did it as d2lte version to let users from other d2xxx models test this on their device.
Philippe,
Phil_Suz said:
For sure, external roms are a bit less fast than main internal but not that much. Ubuntu touch use Mir/Libhybris for graphical acceleration so graphics are very good (very small overhead). I did not tried a lot of apps, but did not feel slow responses. Is it general slow behaviour or for specific actions ? Maybe also, your external card is perhaps a bit slow.
Version 0.13 with audio/phone fix has been uploaded and available in first post. I did it as d2lte version to let users from other d2xxx models test this on their device.
Philippe,
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm about to flash this right after I get it on my device. :good:
~~~~
I actually wiped my external card as I plan on testing to see if that was the cause. I may as well do a backup of my current ROM and see how this preforms as a daily driver. As always, thanks again for dedicating yourself towards this. I feel as I'm the only person who's been commenting daily on this thread, but that shows my excitement towards this project of yours.
Well, while typing this post my download is already done. Might as well put this bad boy on my device and flash it. Quick question, with newer releases of this ROM, couldn't you just dirty flash or no?
Hey awesome work, I've upgraded to a new phone and gave my daughter the s3 I flashed the other night. Man you rocked it! Good job
Making the iPhone jealous one user at a time.
Phil_Suz said:
For sure, external roms are a bit less fast than main internal but not that much. Ubuntu touch use Mir/Libhybris for graphical acceleration so graphics are very good (very small overhead). I did not tried a lot of apps, but did not feel slow responses. Is it general slow behaviour or for specific actions ? Maybe also, your external card is perhaps a bit slow.
Version 0.13 with audio/phone fix has been uploaded and available in first post. I did it as d2lte version to let users from other d2xxx models test this on their device.
Philippe,
Click to expand...
Click to collapse
I have run it a bit today from internal sd and the is a bit of unresponsiveness also when scrolling between things screen we go black till I tap it again by the way this is on v.12 but the only thing I can compare it to is Danks wip rom that I tried a bit which I believe was the developers build and nothing worked but the response time on it was pretty snappy. I also ran that on your multi boot v.2.1 from internal sd card. But this one works that's why your the man! Does the system and catch have have to be 80mb and 20mb or can we up them maybe that might help idk just thinking here.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
kalel420 said:
I have run it a bit today from internal sd and the is a bit of unresponsiveness also when scrolling between things screen we go black till I tap it again by the way this is on v.12 but the only thing I can compare it to is Danks wip rom that I tried a bit which I believe was the developers build and nothing worked but the response time on it was pretty snappy. I also ran that on your multi boot v.2.1 from internal sd card. But this one works that's why your the man! Does the system and catch have have to be 80mb and 20mb or can we up them maybe that might help idk just thinking here.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ubuntu Touch requires the minimum of 2560MB to be used as an actual system. The system is probably at the minimum, and I'm just guessing it is probably the down right minimum for things such as rootfs. The cache is at 20mb because of in case of the max cache size. I might be wrong however, and probably am. I'd just wait until the dev replies.
You could probably increase it if you really wanted to, but it may not benefit you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Built From Soucre, your evo will never be the same.
Team Nocturnal is happy to bring you Kitkat with tweeks to follow.
This is still in it's early stages but I can promise you it is stable and works well.
We will work out as many bugs as possible in the updates to come,
I can not promise you that all will be fixed, but we will try.
Bugs
FFC not working
Hot Restart causes wifi problems, & data. normal reboot fixes it.
Menu settings will not work. widgets and wallpers are fine. just put a settings widget on desktop or use pull down.
video recording is not working looks like it's not saving to sd.
What to do
Be Rooted S-off (did I relay have to say that?) lol
first your gonna need to download the recovery, rom and gapps
Then scroll down to The Q/A section for install instructions
twrp recovery 2.7.0.0. wil full SElinux support for the evo
download file here http://www.androidfilehost.com/?fid=23329332407578618 First release By Captain Throwback
Mirror http://forum.xda-developers.com/attachment.php?attachmentid=2625740&d=1394574916 First release By Captain Throwback
Second Release By Captain Throwback TWRP 2.7.0.5 http://android.aokforums.com/viewtopic.php?f=9&t=380
Thank you so much for this Captain
Download the TN.KitKat.Rom's here http://forums.team-nocturnal.com/i...ROM]TN.kitkat.4.4.2.HTC.evo.supersonic(aosp)
(Newest) 4.4.4 build
Download TN-Kitkat 4.4.4 build
http://forums.team-nocturnal.com/index.php/topic/1752-romkitkat-444-updated-110814/?p=29830
Download the gapps core for kitkat 4.4 here http://www.androidfilehost.com/?w=files&flid=12890
Q. I downloaded the recovery, Rom and gapps now what
A.Frist thing you need to do is NANDROID BACKUP next flash the new TWRP 2.7.0.0 Recovery or TWRP 2.7.0.5
next place the rom and gapps on your sd card
next boot into recovery wipe everything except sd card
next install zip from sd add the rom and gapps and swipe to install
next reboot to system
next setup google account and enjoy kitkat
Q.Ok im up and running now what
A. ok once rom loads and your done setting up google account
set up viper audio by clicking the viper icon in the app drawer follow the instructions
and it will ask you to reboot when its done.
Once phone reboots you can enjoy viper audio in sound fx setting.
Q.Does this Rom offer the use of IRS Starter pack for viper4android
A. yes it does. you can add the IRS starter pack.
to do so download it here http://www.androidfilehost.com/?fid=23329332407585716
Q. ok I downloaded the IRS sampler pack now what
A. you must extract these files from the zip and put them directly in the VIPER4android kernel folder found in your sd card.
so to do this extract zip, copy all files to sd/VIPER4Android/kernel. do not put them in any sub folders just place them in the kernel folder.
then open the viper4 app from your phone and go to menu UI setting and choose expert. that's it now in the app you will see all your options including enable convoler. that's it enjoy
Q.How Do I set up a2sd
A.open terminal from your app drawer. Type the following
su
a2sd install
it will run and ask you to move dalvik, then data your choice
when it's done will tell you needs reboot. click yes and will reboot for you
when phone reboots enjoy more space.
Q.I see a new theme in the settings how do I use this
A. yes in settings Themes choose black ice, when it gives you error for system size, just ignore and install anyways
reboot when its done so that all the effects will take change. that's it enjoy black theme
VIPER4android [URL]http://forum.xda-developers.com/showthread.php?t=2191223[/URL]
esfile explorer
titanium backup
added dark ice theme in settings themes install ignore system size error and reboot when done
added sd tweeks to platform.xml to allow 3rd party apps to acces sd card
added TN Walls, wallpaper app with tons of hosted wall papers find it here if you want to flash on
another device.http://forum.xda-developers.com/showthread.php?t=2732394
more to come
https://github.com/evervolv
First Release 4/10/14
4/11/14
updated op
added q&a section
added IRS sampler link for viper4
and most important! NEW TWRP 2.7.0.5 in download section Thank You Captain
4/26/14
fix torch- Thanks to Captain Throwback
fix a2sd- Thank again Captain
added Black Theme in theme chooser
added special edtion TN Walls, when you open up
wallpapers you will see TN Wallpaper updates everyday from hosted server
takes up no space on your device
added email back in and exchange
removed free flashlight apk now that torch is fixed.
updated Q&A how to install a2sd
11/08/14
fix a2sd on my 4.4.4 build
Thanks To
GursomeWolf & TeamNocturnal http://forums.team-nocturnal.com/
CaptainThrowback, great work on building twrp and first build http://forum.xda-developers.com/member.php?u=1162986
Wambo http://forum.xda-developers.com/member.php?u=5369363
evervolv http://www.evervolv.com/
ViPER520 and zhuhang http://forum.xda-developers.com/showthread.php?t=2191223
Twrp for 2.7 http://teamw.in/project/twrp2
Thedemonic
and to all testers
more thanks to come with proper links
edit.Sorry guys i forgot to add email back in the build. Will add in next rel.
Please post any bugs you find it will help the process. Ty
Hey say thanks.
​
mine
one more
Nice.
Mine for test results:
Tested and Working:
WiFi
GPS
3G
Camera
Data Sync
SMS / 1x Data
Tested and Buggy/Not Working:
4G (says LTE Recommended)
Tested and Missing:
Email App
Did you update TWRP or just reupload mine?
Captain_Throwback said:
Did you update TWRP or just reupload mine?
Click to expand...
Click to collapse
No captain as of right now its the same one you uploaded, I would like to add your link as well as a mirror if that's kool with u.
vinman12 said:
No captain as of right now its the same one you uploaded, I would like to add your link as well as a mirror if that's kool with u.
Click to expand...
Click to collapse
That's fine. I was just wondering why you reuploaded it - but if it was for mirroring purposes, I understand.
Yeah i had so many builds and files lol i was getting confused what was where so i deleted all of it and uploaded 3files required to flash.
Just glad its all come together. Ty for the time you put into as well i no your evo is retired like mine but for the community as long as my evo works i will give what i can.
Sent from my PC36100 using Tapatalk
Awesome. I'll try it out later today!
Sent from my PC36100 using Tapatalk 4 Beta
Vinman, you da man! I'll give it a try in an hour or two. I'll be able to test data, but not phone or SMS/MMS since I'm on freedompop's service and all their voice/text is routed over data. Is this the only official kit-kat build? The only other one I've tried was Captain Throwback's build with spotty data.
Thanks again to all who worked on this!
fishgoon said:
Vinman, you da man! I'll give it a try in an hour or two. I'll be able to test data, but not phone or SMS/MMS since I'm on freedompop's service and all their voice/text is routed over data. Is this the only official kit-kat build? The only other one I've tried was Captain Throwback's build with spotty data.
Thanks again to all who worked on this!
Click to expand...
Click to collapse
There's a version of my build posted with data fixed, by @thedemonic.
@vinman12
I updated my TWRP build and will be posting it in a new thread over at Android Devices (or as I like to call it, @Wambo_World) so once I have that up, you might want to just link to that instead.
The new build has some cool features and is way more complete than the original version I posted. I'll let you know when it's up.
fishgoon said:
Vinman, you da man! I'll give it a try in an hour or two. I'll be able to test data, but not phone or SMS/MMS since I'm on freedompop's service and all their voice/text is routed over data. Is this the only official kit-kat build? The only other one I've tried was Captain Throwback's build with spotty data.
Thanks again to all who worked on this!
Click to expand...
Click to collapse
hey fishgoon, ok kewl yeah check it out, data is fully working, but Im looking to get feed back on all bugs to see if we can correct them, Im aware of most of them but it will be good to compare with the members feed back.
as far as the the Rom this is the first that has been rebuilt with working data, and added tweeks,.
but as far as the first releases belive it or not it was a simple fix on the data which was pointed out to us.
but all is good now. I must have built this a zillion times. lol had one of my buddy from tn build it as well
we all went nuts to get the data flowing. I know @ Wambo did as well.
but now we can all breath a sigh of relief.
Much love to @captain Throwback, he got us all rolling. great work on the Recovery to.
ok enjoy.
Although my Evo doesn't have service, I have been running the Captain's original KirKat ROM on it for weeks and I'm deeply grateful for all the work you guys are doing.
Forgive my ignorance, but if fixing mobile data turned out to be a "small" thing, could this information be shared with preludedrew so he could work it into evervolv? Or has he just dropped support for Supersonic altogether?
Sent from my HTC One using xda app-developers app
NxNW said:
Although my Evo doesn't have service, I have been running the Captain's original KirKat ROM on it for weeks and I'm deeply grateful for all the work you guys are doing.
Forgive my ignorance, but if fixing mobile data turned out to be a "small" thing, could this information be shared with preludedrew so he could work it into evervolv? Or has he just dropped support for Supersonic altogether?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
The vendor files simply need to be pushed on github. The fixed was shared in one of the other threads.
Also @vinman12, the thread is up, I just have to upload the recovery: http://android.aokforums.com/viewtopic.php?f=9&t=380
Great work. Everything seems super smooth. Was able to run Mounts2SD with no problem to get some more room for apps. Also, I was able to do wireless tether using native tether feature and an open connection. However, I was unable to get wireless tether to work with encryption...not a big deal...I think it was also not working in the JB roms either. Overall, runs really really well. I don't listen to music over my phone much, so probably won't try viper audio out. I'll have a better idea once I get on my home wifi and load a bunch of apps on it. I think it's plenty stable to use as a daily driver unless I find a serious app compatibility. Has anyone tried GPS navigation with google maps yet?
Captain_Throwback said:
There's a version of my build posted with data fixed, by @thedemonic.
@vinman12
I updated my TWRP build and will be posting it in a new thread over at Android Devices (or as I like to call it, @Wambo_World) so once I have that up, you might want to just link to that instead.
The new build has some cool features and is way more complete than the original version I posted. I'll let you know when it's up.
Click to expand...
Click to collapse
ok cool can't wait to install it. ty Captain
just give me a holla when its ready.
and thanks for reminding me about Thedemonic lots of thanks to him.
fishgoon said:
Great work. Everything seems super smooth. Was able to run Mounts2SD with no problem to get some more room for apps. Also, I was able to do wireless tether using native tether feature and an open connection. However, I was unable to get wireless tether to work with encryption...not a big deal...I think it was also not working in the JB roms either. Overall, runs really really well. I don't listen to music over my phone much, so probably won't try viper audio out. I'll have a better idea once I get on my home wifi and load a bunch of apps on it. I think it's plenty stable to use as a daily driver unless I find a serious app compatibility. Has anyone tried GPS navigation with google maps yet?
Click to expand...
Click to collapse
that's great to hear, ty
we got optimization in the works, I got some guy named @grusomeWolf working on it as well
you ever here of that guy. lol so you know what ever he adds to this is gonna be crazy.
how's the camera and video working for you I have not herd anything with that yet.
vinman12 said:
ok cool can't wait to install it. ty Captain
just give me a holla when its ready.
and thanks for reminding me about Thedemonic lots of thanks to him.
Click to expand...
Click to collapse
It's ready .
Captain_Throwback said:
It's ready .
Click to expand...
Click to collapse
excellent, dl now, will link shortly
looks good how's it feel? lol
Ty Captain
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM12.0 is here for the LS980, aka the Sprint LG G2.
This is a source build rom, which includes all the latest changes from cm.
Instructions
This will boot on zv7/zv8 firmware. ZVA modem support is coming soon, as sprint is continuing to roll out 2.5, triband support is becoming useful.
Download cm-12.0, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://get.cm/?device=ls980
Gapps:
Official CM ones (soon):
http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
Known Issue
GPS on LTE (Testing a fix now)
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
acree
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse
Awesome Thank you !
Oh wait one question the list start with cm-11 and all the way down is cm-11 am i missing something here lol. I have the cm-12-20141226-EXPERIMENTAL-SU6-ls980.zip install at the moment i would love to installed the stable but as i said the list only saids cm-11
thanks
I have the same question as above ^
Sent from my iPhone using Tapatalk
powerwagon said:
I have the same question as above ^
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yeah i even reviewed all devices and it does not show cm 12 stable at all im searching all over now, i mean the download list for ls980 doesnt even show cm-12 for anything at all
---------- Post added at 06:20 AM ---------- Previous post was at 05:59 AM ----------
only thing i found closest to todays date for a release of cm for ls980 was a cm-resurrection rom its lollipop 5.0.2
here the download page link https://www.androidfilehost.com/?w=files&flid=22680
and hers the original thread http://forum.xda-developers.com/lg-g2/development/rom-resurrectionremix-lpalpha-t2969200
That's because cm12 for our device was just released today, our first nightly is available for download. Check it out let us know how it runs
Sent from my LG-LS980 using XDA Free mobile app
I get a boot loop when i try to flash this rom, any reason why?
be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
Try wiping cache and dalvik cache.
Sent from my LG-ls990 using XDA Free mobile app
can we go from the experimental to this one or should we start from scratch?
i get the bootloop too? could it be from using the apps package from the experimental build?
be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
When this happened to me it was because I didn't know to downgrade the radio to ZV8. Once I did that the ROM booted OK.
CAUTION backup your modem and EFS before you downgrade so you can restore them if you want to go back to a newer stock ROM- EFS might not change but modem for sure. I spent a whole day with "no service" trying to get back to ZVE which has been all round best for me.
Ok after some extensive research I finally got it working with the latest nightly jan 20th. I wiped everything except internal.. Flashed the cm12 then zv8 radio.. Wiped cache and dalvic and it booted fine.. I then proceeded to install the appropriate gapps..
kemroy said:
Ok after some extensive research I finally got it working with the latest nightly jan 20th. I wiped everything except internal.. Flashed the cm12 then zv8 radio.. Wiped cache and dalvic and it booted fine.. I then proceeded to install the appropriate gapps..
Click to expand...
Click to collapse
Sooo- I'm no developer but I can tell you what worked for me. We're starting from different working roms and, except maybe for the recovery, can't imagine this matters. I am on stock ZVE, Dorimanx bumped kernel V9.55KK and bumped TWRP 2.8.3.1
1. nandroid backup and modem backup
2. wipe standard wipe and system
3. flash ZV8 radio from here- http://downloads.codefi.re/autoprime/LG/LG_G2/G2_modems
4. wipe dalvik
5. flash CM nightly (works with 20150120 didn't try older ones)
6. wipe dalvik and reboot
Probably a couple of extra wipes in there but can't hurt. Hope this works for you.
I expect good things from this rom- Shelnutt2 always did a nice things for the Optimus G my last phone.
Thank you
Just wanted to start of saying thanks to @Shelnutt2 for posting up the thread. I'm not sure if you are just going keep the thread up as a place for discussion around the official build for our device OR the CM maintainer that pulled the lucky LS980 number, but either way, thanks!
I came from the December 26th dated alpha build that @Rashed97 did for all the G2 variants and it ran good, few things here and there, but it had been my daily driver since Dec 28th and I've been happy since then. Was apprehensive about flashing the nightly builds because it's usually a regression at first BUT I have to say, so far, so good. My good friend and teammate @thoughtlesskyle and his themes pushed me over the edge, I just had to get the Theme Engine so I could try them on my own device so here I am, on CM12 Official nightly 20150128 and love using the THEMES! :good::good:
All, CM's built in SU control doesn't play nice with Titanium Backup AT ALL (ie, your apps will not restore) so you'll need to either just install SuperSU from the Play Store and update binaries as OR flash it when you flash rom.
Things that did not work in the Unofficial CM12 build that I noticed myself were:
1. No SIM Card warning on lock screen
2. CM Messenger app *send button did not work so app was useless
2a. MMS were not able to be received (not even through Google Messenger app)
3. GPS (well, not like that really worked on stock anyway.....
4. Sometimes system volume would just go to zero requiring reboot to restore
5. VERY hard to get the device to connect to Spark B41 networks (but had SOLID B25/B26 performance)
5a. Mobile networks setting would change on it's on
6. Theme Engine missing
7. Speaker phone didn't work, would turn sound from caller/video chat into very garbled unrecognizable output
8. NFC was SOOOO broken that it required manually deleting the NFC folder from system to keep from 100% wakelock
9. I'm sure other odds and ends but all in all, no show stoppers and I've been quite impressed with the CM12 start for our device
Now, I'm about 1hr fresh on the official build and can confirm that of my list 9 items from unofficial, 2a and 6 are fixed. I'll update as I spend more time with the rom but I'm looking forward to more good things here.
Finding Lollipop for my phone thoroughly made my day. Truly. Thousands of thanks to shel and whomever else got this here.
Flashed 1/28 clean with ZV8 radios via TWRP 2.7.0.0. Way quicker and better-looking and -feeling than stock.
GPS , MMS (with Google Messenger) and speaker work for me.
I've had no trouble with the built-in SU (I dig it), but I restore with ROM Toolbox Pro, not Titanium.
Send button on stock Messaging doesn't work for me either.
It does read "No SIM card - Sprint" on lock screen (as well as during the CM setup process).
Bluetooth works, but texts cannot be read by my car (as they could with stock and most, if not all ROMS on my N5).
Haven't touched NFC. Cheers and thanks again.
If you want the remote from lg, here is the thread for the remote to work on AOSP.
http://forum.xda-developers.com/showthread.php?t=2929146
I've been using it in resurrection ROM for a while now. Since it is from the g3, it has a newer look.
I may come back to cm12, but haven't taken the dive yet.
May wait to see what else Mr Rogers finds. I know cm messenger has been unable to send since the beginning of alphas. Would think they could get that fixed. Also, for a limited data guy, not being able to shut off sprint data has been a issue for me.
Especially since I've heard d802, can shut their off with the toggle.
Looks like using any system profile mutes notifications. Can't get 'em to come back without a reboot.
I'm on the 26th version and just about everything seems to work fine. Sending messages works, sim shows up fine (using consumer cellular [att]), etc. Only thing that I'm curious about is UMS (usb mass storage). My car will not read an mtp device but did read usb mass storage when I was using my motorola atrix (using its internal sdcard, no external card required). Anybody know how to make it work in this rom or should I give that tmobile kk rom a shot (not sure how well it'd work on att)?
ihitcows said:
GPS ... work for me.
Click to expand...
Click to collapse
Scratch that. GPS isn't working. It can locate me when I'm connected to Wi-Fi, but not otherwise.
Screen is stuck in portrait orientation.
I can't get back to my stock backup. Same thing happened on my LG Optimus G: can't get back to AOSP without a total format.
i apologize for posting here, but i came across this thread looking for cyanogenmod 12 for d803. I saw on github you are a contributor. So, i was wondering that if it was even remotely possible for you to build d803? i know it could be a hassle for you thank you for your hard work in building for the beloved g2.
zr239 said:
i apologize for posting here, but i came across this thread looking for cyanogenmod 12 for d803. I saw on github you are a contributor. So, i was wondering that if it was even remotely possible for you to build d803? i know it could be a hassle for you thank you for your hard work in building for the beloved g2.
Click to expand...
Click to collapse
Maybe delete this message and send a PM?
ihitcows said:
Screen is stuck in portrait orientation.
Click to expand...
Click to collapse
Got it. Had to clean-flash 2/1 to get screen rotation working, though.
Tried wiping caches and flashing 1/28, then wiping caches and system. Neither worked.
Still, I'm the happiest camper I've been since I've had the G2.
After impatiently waiting for that day to arrive, here it is: Android 6.0 for our dear s4 is there thanks to our great dev @AntaresOne.
He brought us an unofficial cm13 for the unified s4 variants (jflte) which is stable enough to be used as a daily driver. All credits go to him.
Almost all the basic functions work.
FYI, it's a goodbye gift.
Download link: http://forum.xda-developers.com/showpost.php?p=63729768&postcount=312
Please, used the gapps suggested by the dev. Otherwise, you may face bootloop.
Enjoy but remember to thank @AntaresOne for this awesome work!
Reserved
Reserved...
I'm downloading it right now and going to give it a shot. Hopefully everything works out, including using streaming services like Netflix or Hulu Plus. Will report findings soon.
I have read that cm13 will support tmobile wifi calling will it work with the s4 builds? Is it implemented in this build?
madcow007 said:
I have read that cm13 will support tmobile wifi calling will it work with the s4 builds? Is it implemented in this build?
Click to expand...
Click to collapse
It's not implemented yet
Flash failed... Hmmm. Maybe corrupt data?
bbroad4455 said:
Flash failed... Hmmm. Maybe corrupt data?
Click to expand...
Click to collapse
It should work if the signature verification is skipped.
Also be sure that the downloaded file is correct; some of the mirrors do not yield the correct file andd have a different checksum.
The checksums should be:
Code:
cm-13.0-20151108-UNOFFICIAL-jflte.zip
Size: 297,677,777 bytes
CRC32: 919fb9b9
MD5: cfc714dda4be22afabdaa95e98f72bed
SHA-1: 97d993fccce699fdeb15bb1d39ad074220ce4a75
SHA-256: a3eff70e51b3c32f94808f9ade592d9cb9e1da07113773f2aa30d62503429295
Successfully flashed here. However internal and external mic don't work as well as auto time zones. Other than that, I haven't noticed an issue. I guess at first glance it also does not appear to be rooted.
Trying this on my Metro PCS S4 (jfltetmo) since it's not my daily driver and not connected to their network. So far it seems to be stable, but the battery usage is not good at the moment. The top of the list shows "Uncounted" using the battery the most. Not sure what that means. I am willing to help with testing this rom for this model jfltetmo, so if you want any info from this phone, let me know what and how to get it, and I will gladly share.
This thing did not work for me, leaving the phone stuck at the Galaxy S4 screen at boot. Restored using Odin and stock image, my device is the M919V.
CM 13flashed
Everything works fine but microphone. It does not work at all; call, skype, hangout, voice recorder, etc.
pointdotslash said:
Everything works fine but microphone. It does not work at all; call, skype, hangout, voice recorder, etc.
Click to expand...
Click to collapse
It's a known issues in all cm13 built. No fix for it yet.
Is this ROM dead? or will it be updated to work with microphone fix?
madcow007 said:
I have read that cm13 will support tmobile wifi calling will it work with the s4 builds? Is it implemented in this build?
Click to expand...
Click to collapse
It cannot. Since ICS, T-Mobile's WiFi Calling has depended on TouchWiz to work. Sadly, for the S4, TouchWiz is stuck on 4.4.4 KitKat and likely won't be moving up to Lollipop. As of now, I keep a working KK TW Rom backup up as a Nandroid in case I need it but I've since resigned myself to moving on.
Need something to fix 6.0
I downloaded the Android 6.0 marshmallow for tmobile and the 6.0 gapps i flash them with TWRP recovery on my galaxy s4 I cannot create an APN because it says my device model is unknown and sims card is not inserted what do I need to do to fix this or is it just a CM bug.
Same^ any help
i used these micro gapps http://opengapps.org/
madcow007 said:
I have read that cm13 will support tmobile wifi calling will it work with the s4 builds? Is it implemented in this build?
Click to expand...
Click to collapse
I think that a work around would be to call with hangouts... That's what I use to call over Wi-Fi
Sent from my SGH-M919 using Tapatalk
jfltetmo
vasolini said:
Trying this on my Metro PCS S4 (jfltetmo) since it's not my daily driver and not connected to their network. So far it seems to be stable, but the battery usage is not good at the moment. The top of the list shows "Uncounted" using the battery the most. Not sure what that means. I am willing to help with testing this rom for this model jfltetmo, so if you want any info from this phone, let me know what and how to get it, and I will gladly share.[/QUOTEiwould definatly interested in this that i have s4 with 5.1.1 rooted aicp rom w/twrp.
]
Click to expand...
Click to collapse