Assalamualaikum and Hello to everyone
As requested some users around here, I likely to share the Super Stock kernel.
Why is it called Super Stock kernel? It is because the kernel is compiled mostly untouched source from arco's source in github with some additional features.
Stock + additional features = Super stock kernel
This super stock kernel is based on hurtsky's idea. Since he can't continue this, so I will try my best to keep this kernel up-to-date.
Features:
-Kernel 3.4.61
-Compiled using GCC arm-cortex_a8-linux-gnueabi-linaro_4.8.2-2013.08 from christopher83
-Various governors:
SmartassV2
InteractiveX
lulzactive
SmartassH3
Ondemand
Conservative
Interactive
Performance
Power save
-IO scheduler :
noop
ROW
cfq
bfq
SIO
VR
-Features added:
100% battery fix after discharged
CRT animation fix (better appearance of CRT-off animation)
VDD interface support
added CPU freq without o/c (902MHz, 1.1GHz, 1.3GHz)
BLX
Audio loudness Rev 2 by skywalker
Changelog:
Release 3:
-updated to 3.4.61
-now kernel compiled using GCC arm-cortex_a8-linux-gnueabi-linaro_4.8.2-2013.08 from christopher83
-changed lulzactive to lulzactiveW governor (name still the same though) for better performance
-added BLX support
-added CRT fix, 100% battery after discharged
-lowered wifi, lcd and vibetonz voltage
-added cpu freq table w/o overclocking (credit to madridii about this one)
-added audio loudness Rev 2 by skywalker
Release 2:
-fixed smartassH3 governor (I forgot to add to the kernel, sorry guys )
-governor added
SmartassV2
interactiveX
-IO scheduler added
VR
-VDD interface support
Release 1:
-initial release
Instructions:
-Download the one of the files.
-Reboot into CWM.
-Flash the zip where you put (e.g : sd card)
-Wipe /cache and Dalvik cache
-Reboot
Downloads:
Release 3:
CM10
SuperStock-kernel-CM10
SuperStock-reverted-kernel-CM10
CM10.1
SuperStock-kernel-CM10.1
SuperStock-reverted-kernel-CM10.1
CM10.2
SuperStock-kernel-CM10.2
SuperStock-reverted-kernel-CM10.2
MIUI
SuperStock-kernel-MIUI
SuperStock-reverted-kernel-MIUI
Older Releases
Release 2
CM10
SuperStock-kernel-CM10
SuperStock-reverted-kernel-CM10
CM10.1
SuperStock-kernel-CM10.1
SuperStock-reverted-kernel-CM10.1
CM10.2
SuperStock-kernel-CM10.2
SuperStock-reverted-kernel-CM10.2
MIUI
SuperStock-kernel-MIUI
SuperStock-reverted-kernel-MIUI
Release 1
CM10
SuperStock kernel-CM10
SuperStock kernel-Reverted-CM10
CM10.1
SuperStock kernel-CM10.1
SuperStock kernel-Reverted-CM10.1
CM10.2
SuperStock kernel-CM10.2
SuperStock kernel-Reverted-CM10.2
MIUI
SuperStock kernel-MIUI
SuperStock kernel-Reverted-MIUI
special thanks to :
arco
hurtsky and keff91
and also you guys
If you guys have any suggestions to add features (more Cpu governors , add OC, etc) , just mention my name in this thread, I'll decide whether I will add it or not .
In the meantime, enjoy
Add voltage control..
poji94
poji94 said:
If you guys have any suggestions to add features (more Cpu governors , add OC, etc) , just mention my name in this thread, I'll decide whether I will add it or not .
In the meantime, enjoy
Click to expand...
Click to collapse
hey poji94 can u change links? i cant download because sever giving .exe link
great work @poji94
Sent from my GT-I8150 using Tapatalk 4 Beta
Waalaikumsalam Warohmatullohi Wabarokatu
Good work man.. cool
Hii poji94
Good Job man.!! :good:
Wa'alaikumsalam wr.wb
great work man... :thumbup:
vpart_aeip said:
Wa'alaikumsalam wr.wb
great work man... :thumbup:
Click to expand...
Click to collapse
great job bro maybe u can add smartAssV2 and interactiveX on next kernel version :good:
gwonder said:
hey poji94 can u change links? i cant download because sever giving .exe link
Click to expand...
Click to collapse
Mirror Dev-Host: :good:
SuperStock kernel-CM10
SuperStock kernel-Reverted-CM10
SuperStock kernel-CM10.1
SuperStock kernel-Reverted-CM10.1
SuperStock kernel-CM10.2
SuperStock kernel-Reverted-CM10.2
Waalaikumussalam.....
Trime kasih banyok..hehe..
Hope can have more governora like smartassv2 jugop..thanks
yannis_gr said:
Add voltage control..
Click to expand...
Click to collapse
included for next release
gwonder said:
hey poji94 can u change links? i cant download because sever giving .exe link
Click to expand...
Click to collapse
please untick "using download manager" thingy something
dec0der said:
great job bro maybe u can add smartAssV2 and interactiveX on next kernel version :good:
Click to expand...
Click to collapse
syedkamal92 said:
Waalaikumussalam.....
Trime kasih banyok..hehe..
Hope can have more governora like smartassv2 jugop..thanks
Click to expand...
Click to collapse
added for next release
Hope u will never increase the amount of ram becuse it make unstable on touch responsive.
syedkamal92 said:
Hope u will never increase the amount of ram because it make unstable on touch responsive.
Click to expand...
Click to collapse
the op will keep this as untouched stock kernel w/ additional governors and schedulers to keep it simple (hope so )
kernel updated to release 2. see changelog for changes
poji94 said:
kernel updated to release 2. see changelog for changes
Click to expand...
Click to collapse
nice and fast. gonna try your 10.1 reverted. honestly, stock kernel + additional governors/ schedulers would be enough (the main purpose) to keep it clean and different with others. keep it up bro :good:
poji94 said:
kernel updated to release 2. see changelog for changes
Click to expand...
Click to collapse
Thanks for fast update bro..keep it up:laugh:
dec0der said:
nice and fast. gonna try your 10.1 reverted. honestly, stock kernel + additional governors/ schedulers would be enough (the main purpose) to keep it clean and different with others. keep it up bro :good:
Click to expand...
Click to collapse
+1 i agree with you :good:
poji94 said:
kernel updated to release 2. see changelog for changes
Click to expand...
Click to collapse
ur so fast bro @poji94
Sent from my GT-I8150 using Tapatalk 4 Beta
I will update the kernel to push in the requested features or fixes. maybe I'll put CRT fix ( for CM10.2 especially) and audio loudness. well, it depends on you guys..:fingers-crossed:
poji94 said:
I will update the kernel to push in the requested features or fixes. maybe I'll put CRT fix ( for CM10.2 especially) and audio loudness. well, it depends on you guys..:fingers-crossed:
Click to expand...
Click to collapse
deleted! its out of purpose
Related
hiii friends
This is the first time I buid kernel
I am also not a developer, I just want to learn about this. and without the assistance of a member of xda-developers, I probably did not understand anything.
okay :highfive:
Changelogs
Deka-kernel-CM9-3.0-rev-v1.2 17/09/2013 New!!
√ Squashed update of kernel from 3.0.93
√ Compiled with Linaro GCC 4.8.2 toolchain optimized for Cortex-A8 cpu with Neon technology support
√ Fix cpufreq 1.4Ghz normal boot
√ Added O3 Optimization
Deka-kernel-CM9-3.0-rev-v1.1 5/09/2013
√ Squashed update of kernel from 3.0.93 - 3.0.94 to 3.0.95
√ Added Extreme UV
√ Added NEON compilation flag to VFP module
√ Added Battery Life eXtender (BLX) version 1
√ Change Default Screen Off - change to 4 518Mhz lulziactived
√ Optimized SLUB memory allocator
√ Added new Governor: intellidemand, hyper, SmartassH3, smartassV2, lulziactived, interactiveX
Deka-kernel-CM9-3.0-rev-v1.0
√ Kernel version 3.0.93
√ RAM 377MB
√ Initial realise
√ Compiled with Arco's source
√ Compiled with Linaro GCC 4.7.4-2013 toolchain optimized for Cortex-A8 cpu with Neon technology support
√ 100% battery notification after charger unplug
√ Overclock support
√ Added lcd rev3 module ( better batery life!! )
Governor
- conservative
- ondemand
- powersave
- interactive
- pervormance
IO Schredule
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
Installation Guide
1. Reboot To Recovery Mode
2. Wipe Cache & Dalvik Cache
3. Flash the kernel
4. Fix Permissions
5. Reboot (normal boot)
Credits:
- Our Master Arco for his kernel source ( go press thanks for any posted by arco without he, this kernel wont existed )
- Rd Arief, Taufik, Dody Embul To tester
- Singgih BK for original image bootsplash
- educk, biago7xD, honeyx, CastagnaIT, Hurtsky for learning source
- keff91 to learn me compile with GCC 4.8.2
- hadidjapri hadiconfig (more RAM)
- Cahaya Mata, Lion Bcrt, Dark, Arya Ruby & Ahmad Vpart faithful learn together about building the kernel
- Reza Wishnu Damarjati for the first tutorial I learned
- CyanogenMod developers that developing our CM
- Linaro GCC developers let me using this powerful compiler thanks to Christopher83
- xda-developers.com for all the teaching and member
- All Member Android Indonesia
- All Member Serba Serbi Android
- [Official Community] Galaxy Wonder GT- I8150
- [Unofficial Community] Galaxy Wonder CyanogenMod Indonesia
- A.E.I.P Android Evolution Indonesian Project
Criticism and suggestions are very important to correct this deficiency kernel.
I'm waiting for comments
may be useful
reserved
reserved 1
wow... CM9 is great for gaming ... I will try later
seruputt kopine
new cm9 kernel ... interesting
but it has white screen annoyance when wake up phone with lcd rev 3 .. right .. or it hasn't affect on cm9 kernel ?
vpart_aeip said:
wow... CM9 is great for gaming ... I will try later
seruputt kopine
Click to expand...
Click to collapse
Yeaah broo
Try for gamming :good:
#coffeewhiteluak
Ahmed.ragab said:
new cm9 kernel ... interesting
but it has white screen annoyance when wake up phone with lcd rev 3 .. right .. or it hasn't affect on cm9 kernel ?
Click to expand...
Click to collapse
true, when there will be a disruption deepsleep white screen, because I use the patch lcd rev3
adikasgw said:
true, when there will be a disruption deepsleep white screen, because I use the patch lcd rev3
Click to expand...
Click to collapse
i think sir arco said it didn't make this effect on cm9 ..
i will try and tell you if it is present or not .. as possible as i can
Ahmed.ragab said:
i think sir arco said it didn't make this effect on cm9 ..
i will try and tell you if it is present or not .. as possible as i can
Click to expand...
Click to collapse
Indeed, if from source arco's not provided a patch for rev3. because it is purely for others. okay bro please give it a try. I'll wait for feedback :highfive:
adikasgw said:
Indeed, if from source arco's not provided a patch for rev3. because it is purely for others. okay bro please give it a try. I'll wait for feedback :highfive:
Click to expand...
Click to collapse
bootloop
I will try to go back to stock kernel and flash it again and see if bootloop soolved
bootloop again (waiting your fix)
Ahmed.ragab said:
bootloop
I will try to go back to stock kernel and flash it again and see if bootloop soolved
bootloop again (waiting your fix)
Click to expand...
Click to collapse
Maybe you're wrong, my friend uses CM9 EOL kernel and use Deka. does not happen bootloopyou try to check first things first
wekidev said:
Maybe you're wrong, my friend uses EOL CM9 kernel and use DECA, does not happen bootloopyou try to check first things first
Click to expand...
Click to collapse
I'm using touchwiz last version and got bootloop
Ahmed.ragab said:
I'm using touchwiz last version and got bootloop
Click to expand...
Click to collapse
do not know why that error. may file that you downloaded a corrupt or problematic. and whether it was based toutchwitch is CM9 EOL?
Try before instal
1. Reboot To Recovery Mode
2. Wipe Cache & Dalvik Cache
3. Flash the kernel
4. Fix Permissions
5. Reboot (normal boot)
wekidev said:
do not know why that error. may file that you downloaded a corrupt or problematic. and whether it was based toutchwitch is CM9 EOL?
Try before instal
1. Reboot To Recovery Mode
2. Wipe Cache & Dalvik Cache
3. Flash the kernel
4. Fix Permissions
5. Reboot (normal boot)
Click to expand...
Click to collapse
yes it's base is cm9 Eol
and I did all this steps
Ahmed.ragab said:
yes it's base is cm9 Eol
and I did all this steps
Click to expand...
Click to collapse
it should not happen... you check before installing, whether the file corrupt ? or not . I 've tried downloading here . and does not occur bootlop
Can u add UV to next update :good: Thanks!
wekidev said:
Can u add UV to next update :good: Thanks!
Click to expand...
Click to collapse
Yepp I will add it
adikasgw said:
Yepp I will add it
Click to expand...
Click to collapse
Thanks :good:
wekidev said:
Thanks :good:
Click to expand...
Click to collapse
Update
see changelogs
adikasgw said:
Update
see changelogs
Click to expand...
Click to collapse
woooww!! thank thanks :good::good:
try now!
G-Kernel
Welcome to G-kernel : the kernel meant to drive
Features :
Upstreamed Linux Kernel Source to 3.4.11
Compiled with googles 4.6.1 gcc toolchain
Sammy Kernel Spam halted
Faux Sound support
Frandom Support
Lion Heart gov
Intelliactive gov
Lagfree gov
Smartmax gov
Interactive gov as defualt in kernel
zRam Supported with kernel module with 400mb swap
Frandom supported with kernel module
Init.d Supported
GPU OC Upto 533mh
Full Exfat support
Experimental F2FS support
Cpu boost driver
Enabled KSM (kernel sampage mereging)
BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
Ondemmand plus gov
Whealthy gov
Smart Ass v2 gov
Ability to underclock
Cpu OC upto 2.1
Cpu Booster and Smooth scroll tweaks
O3 flags to speed up things
Fast Charge Support !
Read Ahead Tweaks
AND WAY MORE TO COME ...
Kernel Samepage Merging :
It lets the system share identical memory pages among different processes or virtual machines. This is done by scanning through the memory finding duplicate pages. The duplicate pair is then merged into a single page, and mapped into both original locations. The page is also marked as "copy-on-write", so the kernel will automatically separate them again should one process modify its data.
Click to expand...
Click to collapse
What is Frandom :
Frandom as quoted from rawintellect from this thread here
frandom will allow you to use crossbreeder to it's full potential. Reducing lag by orders of magnitude over the regular RNG (random number generator). please take a trip over to the crossbreeder thread here for more info.
Click to expand...
Click to collapse
Source Code
THE SOURCEE CAN BE FOUND OVER HERE
ISSUES :
This bad op
nothing in general
Downloads :
FROM V2 AND ONWARDS REFER TO MY G-DRIVE FOLDER WHICH CAN BE FOUND HERE
Mon , June 23rd v1
Tus , June 24th v2
Fri, July 4th v3
G-KERNEL CHANGELOG
Mon , June 23rd
--------------------
initial build
Tus , June 24th
--------------------
refer to my git for changelog beacuse alot to be listed here
Fri, July 4th
--------------------
Added KSM
Added experemintal f2fs support
Upstreamed source to 3.4.11
Gpu oced to 533mh
added smartmax gov
Added fastcharge
Rewrite of exfat
Credits :
Sonic-Developers
spegelius
1.ktoonsez
2.googyanas
3.Samsung
4.Google
5.Xda
6.All others who involved directly or indirectly to the development of this kernel
HOW TO OC YOUR DEVICE :
FIRST : I AM NOT RESPONISBLE TO ANYTHING THAT HAPPENES TO YOUR PHONE WITH THIS , I PROVIDE THESE INSTRUCTIONS AS IS SO IF YOU TRY THIS AND YOUR PHONE EXPLODES DONT COME CRYING
1. If you have cm rom with cm performance settigs do :
A. Open Settings > Performance
B. Choose Performance or Smartx as governor
C. If you have 444 cm there will be a slider , use that to oc
D. Use kernel tweaker to tweak other features of the kernel
d. profittttttttttttttttttttttttttttttttt !
1. If you have non cm rom without cm performance settings do :
A. Download Rom Toolbox lite from playstore
B. Go to performance tab
C. Open Cpu Control
D. Choose Performance or Smartx as governor
E. Use the slider to oc
F. Use kernel tweaker to tweak other features of the kernel
G. profittttttttttttttttttttttttttttttttt !
Going to give this a try Seems smooth
wow ... i am going to upload a version with oc uv uc , exfat , gpu oc , increased read ahead , and many more !!
New update is up !
Oh nice, gonna have to try his when i get time
Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app
6783 said:
Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
click the link ... click file from the bar that appears above the folder structure then hit download :angel:
mythi said:
click the link ... click file from the bar that appears above the folder structure then hit download :angel:
Click to expand...
Click to collapse
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!
moviecut said:
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!
Click to expand...
Click to collapse
what is vanish rom
Sorry, VanirAOSP!
moviecut said:
Sorry, VanirAOSP!
Click to expand...
Click to collapse
ohhhh lol ... did it boot nicely , hows your impressions so far
Both thumbs up! Latest vanir nightly + v2 kernel. Great so far!
Gesendet von meinem GT-I9295 mit Tapatalk
Seems that this wont go higher than normal maximum frequency.
ElakNovAlamak said:
Seems that this wont go higher than normal maximum frequency.
Click to expand...
Click to collapse
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc
mythi said:
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc
Click to expand...
Click to collapse
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.
ElakNovAlamak said:
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.
Click to expand...
Click to collapse
ya ... something strange ... all features work only oc i will look into this more
mythi said:
ya ... something strange ... all features work only oc i will look into this more
Click to expand...
Click to collapse
do you know where I can find the original kernels for the device?
not sure how the modem could be affected - but my signal is way lower than normal - no more 4G where is used to get it - also goes doen from H+ to H most of the time.
My kernel would have only what's needed. However users can request a feature and if i find it worthy i would test it and add.
I am keeping short and writing the features i have added so far !
FEATURES:
V 1.4 : [ As of now only CM based ]
Switched to latest CM13 source base
Voltage control
More refined sandy charger control
Tuned elementalx governor
Darkness governor
Kcal tweaks
FIOPS & SIO added
Compiled with latest uber toolchain
Other tweaks from my end
V 1.3 :
FIOPS scheduler added
Tuneups to interactive governor
Changes to elementalx and it's tunables.
Solves potential MTP mode USB issues and sound issues.
Full synapse support added ( Doesn't directly come inside from my kernel. You will have to flash separately ). Thanks to @yarpiin
More thermal changes
Lot more in store
To download synapse flashable zip refer third post
Please install CM camera next mod which is also available under downloads section. Just install it as normal apk. Hotplug has video rec freeze on stock OP camera. Blame Oneplus for it.
V 1.2 :
Sandy charger control. Now charge your op2 much faster than stock ( Use synapse or updated kernel adiutor app [available in my downloads,not playstore of kernel adiutor] to enable it and control )
Intelliplug. Use it wisely and according to ur usage
Initial support to synapse ( The bulk needs to be still controlled via Kernel Adiutor )
Initial attempt at porting Faux Sound control ( It's not working completely yet. Will be fixed soon )
Merged with latest Oxygen 2.1 source
Plenty of other features hidden.
Initial release :
Compiled with Sabermod gcc 4.9 toolchain
Powersuspend with different modes
USB Fast charge
Intelligent cpuquiet hotplug framework ( Based on NVDIA and tuned to msm )
ElementalX governor from flar ( with latest patches )
Kcal control ( colour control driver by savoca )
Fsync on/off support
BFQ I/O scheduler added
Thermal code tweaked heavily ( device should stay at it's coolest )
Optimized for best performance and battery ( you can get some of the best results )
Smoothness guaranteed
Rcu,sched,mm and other various enhancements
There are plenty more hidden ! Just use and experience the kernel. Don't forget to post your reviews
I can only say that you can get one of the best experiences with probably no real bugs !
Recommended app :
Kernel Adiutor by grarak
Downloads :
Sandy kernel for One Plus two
Installation guide :
Download the zip
Reboot to recovery ( custom recovery )
Flash the zip
Enjoy sandy kernel on one plus two
Credits :
@grarak - For the code base and for his time. Nice guy to speak with
And to everyone else, whose code i have used.
Tester credits :
@Skybark - For testing. Nice guy to speak with as well. Thanks mate !
XDA:DevDB Information
Sandy Kernel for One plus two, Kernel for the OnePlus 2
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/sandy_oneplus2_msm8994
Kernel Special Features: [Fast Charge] | [ Elementalx] | [Darkness ] | [ Ice cool thermal]
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2016-02-25
Created 2015-09-04
Last Updated 2016-04-28
FAQ's
Q : Will this work on all ROM's ?
A : It will work bugless in Oxygen OS, but could give you bugs in CM or CM based ROM's ( as they are under alpha stage )
Q: OMG ! Baettaryyy SUCKZ ! STAPH putting lame kernels
A : My kernel is intended for battery and performance. I have no intention to build a kernel for battery draining. Your drain comes from your location apps,wake locks,etc. Use App ops or servicely app and check damn wakelocks & keep awake of your apps ( Play services, Maps, facebook,etc )
Q: What governor do you suggest ?
A : I have included only one governor ( elementalx ) other than stock and hence i would suggest you switch to it if it's not pre-switched after flashing.
Synapse link
Synapse flashable zip
Tested and all I can say is to flash that s#it!!Smoothness overloaded.Awesome power management!
5* rating
Tapped from my ①+②=❸
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
yarpiin said:
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Click to expand...
Click to collapse
Works great on OOS 2.0.2!
ebanreb37 said:
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
Click to expand...
Click to collapse
Tapped from my ①+②=❸
Great !!! will try
Reserved for my tweaks.. Thanks for the kernel.
From lettuce with LiquidSmooth ROM and Sandy Kernel
vaisakh7 said:
Works great on OOS 2.0.2!
Tapped from my ①+②=❸
Click to expand...
Click to collapse
camera force close, mp3 error, all big cores always on?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
No issues!Camera works fine,MP3 works fine,cores are shut down on light usage(thanks to CpuQuiet hotplug).
Tapped from my ①+②=❸
Works great~~ still testing the fast charge~ tho is it possible to have westwood tcp congestion or others perhaps?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
You mean you face this ?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Seems like a recurring theme with these early OP2 kernel attempts..
return.of.octobot said:
Seems like a recurring theme with these early OP2 kernel attempts..
Click to expand...
Click to collapse
These are not there in this kernel ! [ He was just questioning if it is there ]
Santhosh M said:
These are not there in this kernel ! [ He was just questioning if it is there ]
Click to expand...
Click to collapse
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
return.of.octobot said:
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
Click to expand...
Click to collapse
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Can you verify if this is true?
ebanreb37 said:
Can you verify if this is true?
Click to expand...
Click to collapse
This isn't true.I've been a tester and I can assure that these issues doesn't exist!
Tapped from my ①+②=❸
vaisakh7 said:
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Click to expand...
Click to collapse
does elementalx efficient in terms of battery?
I am proud to present my second release on XDA DEVELOPERS it is DomnesuKernel for Galaxy S i9000!
Firstly, huge thanks go to these individuals & teams (for code I have kanged, ideas I have been inspired by):
Pawitp, mohammad.afaneh, Stratosk, DerTeufel, Kasper_h, neobuddy89, Christopher83, alberto96, jupiter5700 (betatester)
This kernel combines the very best of all i9000 kernels for speed, features and stability.
It is compatible with all JB (4.1.2,4.2.2,4.3, 4.3.1) and KK (4.4.2, 4.4.4) ROMs based on AOKP and CM layout!
General Features
- Linux kernel 3.0.101
- Double Recovery
- Swap SD card
- LiveOC up to 130%
- Custom Kernel Splash (thanks to jupiter5700)
- Normal OC up to 1500MHz
- Custom Voltage, max ARM 1600mV, Max INT 1300mV
- CMC Color
- Voodoo Sound
- Voodoo Sound Call volume hack
- BLN & CM LED
- Battery life extender
- 417Mb available RAM with CMA technology
- Compiled with Linaro 4.9.4
- Fast charge
- New Lowmemory killer from HTC M7
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand
- Governor intelliactive
- Governor OndemandX
- Governor lagfree
- Governor wheatley
- Governor smartassV2
- Governor lulzactive
- Governor conservative
- Governor interactive
- Governor interactiveX
- Governor SavagedZen
- Governor minmax
- Governor brazilianwax
- Governor adaptive
- Governor ondemand
- Governor userspace
- Governor powersave
- Governor lionheart
- Governor perfomance
- bfq I/O scheduler
- cfq I/O scheduler
- deadline I/O scheduler
- fifo I/O scheduler
- noop I/O scheduler
- row I/O scheduler
- sioplus I/O scheduler
- vr I/O scheduler
- zen I/O scheduler
- Fast Charge support
- zRAM support
- SWAP support
- TV-Out working
- Included Modules usbhid.ko, mouse.ko and many others
- init.d support
SWAP SD
the hard way is to modify /system/.domnesukernel/swapsd from "swapsd=0" to "swapsd=1" and you External Card Will Be use like internal.
delete /system/.domnesukernel/swapsd will go back to stock storage status.
CWM Recovery is by default.
To boot in TWRP just hit any volume keys after vibrate to boot into TWRP recovery.
You can use DevilTools v1.1.2 app to configure this kernel. It is here LINK
Known issues.
Sometimes Camera video recordind and Gallery video playing do not starts from first attempt. Do not panic! It is not bug it is feature of CMA memory allocation! Close Camera or Gallery. Try again.
If phone do not wake up after LiveOC then next time when you will be use LiveOC set Min.CPU freq. to 400MHz!
If video playback is crashes with error then you need to flash standard CyanogenMod video libs. This error is due to you use bigmem libs from previous ROM or KERNEL.
Please do not ask me for modify this kernel to Captivate, Vibrant and other i9000 clones, a have no left time for this work, sorry...
DOWNLOAD links to kernel:
ZippyShare 1.16.1
ZippyShare 1.16
View attachment 3479751
DOWNLOAD links to Standard CyanogenMod video libs. WARNING! Download libs for your version of android!
View attachment JB_41_CM_libs.zip
View attachment 3480012
View attachment KK_44_CM_libs.zip
If you like my works, you can donate me for a cup of coffee.
Z715449732106 WMZ
R267871968489 WMR
E567915913413 WME
410012259064266 Yandex Money
XDA:DevDB Information
DomnesuKernel i9000, Kernel for the Samsung GT-I9000 Galaxy S
Contributors
Domnesu
Version Information
Status: Stable
Created 2015-09-19
Last Updated 2015-09-23
Last version: 1.16.1
I could not download that link.?could you upload in mirror link
after install gallery video can't play . how to solve . thanks
yah7733 said:
after install gallery video can't play . how to solve . thanks
Click to expand...
Click to collapse
You need to flash from recovery standard CyanogenMod video libs to you version of android. I put this libs to the first post!
Dear Domnesu .
First many thanks solve the video problem .
I flash this kernel on slim 4.4.2 before flash mackay kernel .
this kernel more faster that mackay . 417 ram 720p work . amazing .
Can you build kernel for lollipop (5.1.1)?
Alokhacker said:
Can you build kernel for lollipop (5.1.1)?
Click to expand...
Click to collapse
I'm already working on the kernel for 5.x it is possible that in a week we will have our new core for 5.x
kernel is fast and smoothly but I can not change maximum cpu frequency higher than 1000Mhz because phone restart after a few minute
my rom is CM 11 (latest nightly)
sorry my bad English
Superb bro.
Also build for lollipop too
althafvly said:
Superb bro.
Also build for lollipop too
Click to expand...
Click to collapse
+1
Is it possible to port this kernel over for the galaxy s captivate since the devices are identical?
Greetings.
ChriZz12 said:
Is it possible to port this kernel over for the galaxy s captivate since the devices are identical?
Greetings.
Click to expand...
Click to collapse
As author said in the first post: "Please do not ask me for modify this kernel to Captivate, Vibrant and other i9000 clones, a have no left time for this work, sorry..."
"
This really is the best kernel ever that this device has seen. It has breathed new life into an old workhorse. Thank you for your amazing work.
Changelog 1.16.1In the kernel added script to automatically consolidate application InCallUi in memory, in consequence of which lost any delay on incoming calls on 4.4
ZippyShare 1.16.1
Nice kernel :good:
Perhaps could you provide a link to your source as I could help with some kernel related stuff (if needed).
Also, I've noticed that I can't get into recovery mode anymore. (I flashed back mackay kernel and everything is fine)
thanks, gsstudios.
Domnesu said:
Changelog 1.16.1In the kernel added script to automatically consolidate application InCallUi in memory, in consequence of which lost any delay on incoming calls on 4.4
ZippyShare 1.16.1
Click to expand...
Click to collapse
Nice work bro
Keep it up
Waiting lp build too
Please advise what parameters I set out to CPU in DevilTools until my phone frequency is 1200Mhz or higher and the phone does not auto reboot
my rom is CM11 latest nightly
sorry my bad English
althafvly said:
Nice work bro
Keep it up
Waiting lp build too
Click to expand...
Click to collapse
+1
Hey.
I got one problem using your kernal. I used slimbean 4.3 . i flashed your kernal and cm libs. But cm libs didnt work, 720p didnt played. Music player force closed and dsp manager also
. so i replaced one file from slimbean stock. Now it works.
I think you need to seperate the cm libs. Coz the 4.2.2 and 4.3 libs are not same
I am using OMNI 4.4.4
Your kernal is rocking fast and battery friendly.. Thanks for this lovely kernal
We are expecting more from you.
Good luck. And thanks for your efforts
I am flash kernel and KK_44_CM_libs.zip on android 4.4.4 Mickay ,error first camera ,how to fix ,other top!
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- standard cpu frequency for mi5 lite
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=212428
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Xiaomi Mi 5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-mi5-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-23
Last Updated 2017-08-23
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/23-08-17
- initial release
v2.0/4-9-17
- standard cpu frequency for mi5 lite
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
Great news Sir.
I hope yours kernel would bring smooth rom, fluid experience and better battery life for Gemini Sir.
hans william said:
Great news Sir.
I hope yours kernel would bring smooth rom, fluid experience and better battery life for Gemini Sir.
Click to expand...
Click to collapse
I focus for all my kernels to bring good battery life with a few useless commits and features inside
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I focus for all my kernels to bring good battery life with a few useless commits and features inside
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
I hope you will include a setting that could manually disable CPU core, so battery life will be improved, as hotplugging couldnot save much battery life.
hans william said:
I hope you will include a setting that could manually disable CPU core, so battery life will be improved, as hotplugging couldnot save much battery life.
Click to expand...
Click to collapse
I will add more usefull features soon m8
Sent from my iPhone using Tapatalk Pro
If you need/want any testers i could help.
alreadyregistered said:
If you need/want any testers i could help.
Click to expand...
Click to collapse
Cool ,thx m8 ^^
Sent from my iPhone using Tapatalk Pro
Oh cool, another new kernel. Time to check it out
Hi there, thanks for the kernel, just one question, it is possible to give the normal Freq to the 32GB Model? i'm interested in this kernel since of many of this features, but i like to use the normal clocks of CPU/GPU :C
panchovix said:
Hi there, thanks for the kernel, just one question, it is possible to give the normal Freq to the 32GB Model? i'm interested in this kernel since of many of this features, but i like to use the normal clocks of CPU/GPU :C
Click to expand...
Click to collapse
Sure m8,i will add it soon
Sent from my iPhone using Tapatalk Pro
plz mi5 32 gb OC cpu to 2.1 GHZ
thanks for your work, hope your kernel delivers great battery life.. I'll start trying it soon, would you add support for AKT Profiles? Thx
After installing this kernel on RR 5.7.4 (CM13) screen became very dark, even on maximum brightness in settings.
ERRORR2 said:
After installing this kernel on RR 5.7.4 (CM13) screen became very dark, even on maximum brightness in settings.
Click to expand...
Click to collapse
The problem is cm13 is a little outdated thats why there are a few problems
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
The problem is cm13 is a little outdated thats why there are a few problems
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Ah, OK
Anyway thanks for your work and hope for further development)
Sir I flashed your kernel but I could slowdown my big core even on powersave mode, it still run 1036,
I sm on RR 5.84 Sir
hans william said:
Sir I flashed your kernel but I could slowdown my big core even on powersave mode, it still run 1036,
I sm on RR 5.84 Sir
Click to expand...
Click to collapse
I will check it m8
Sent from my iPhone using Tapatalk Pro