Related
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
REVIEW:
Got the dock today. Gotta say, not too bad. Although I don’t really think it’s worth more than about $25 tops. The build quality is ok. Everything is plastic, but it feels kind of light (the suction holder). Guess that’s a good thing if it’s being mounted to the windshield.
What’s included: Phone Dock, Suction Holder, Car Charger, Sticky suction pad (to use on your dash)
Suction Holder
There are 3 main components to this. The suction it pretty heavy duty. Probably better than my Garmin windshield mount. Once positioned on the glass, there’s a lever you push down drawing the air out making for a pretty good and strong contact. To release it from the windshield is just as easy. Just pull the same lever up to release.
The holder allows for full 360 rotation of the phone. Loosen the round knob to position and tighten. Once tightened, it’s pretty snug.
Where the phone dock connects, the suction holder has a little spring loaded push lever that’s used to clamp the phone dock to the holder. Same method is used to release the phone dock.
Phone Dock
Again, it’s pretty light. I wouldn’t say it’s feels cheap but just really light. The phone fits in pretty sung. It’s definitely not going anywhere. The dock also has a cut out for the camera, which is nice if you want to take pics of the road or maybe even a video of the guy in front of you with a lowered Silverado with a mural of his trunk on his tailgate
Once the phone is in, the bottom end of the phone dock slides in and out making the usb contact. On the back of the dock, you have a micro usb port for charging and a 3.5mm line out jack. My only concern is with time, this portion will get loose. Seems like there’s 2 positions this click into as you slide it one way or the other.
Car Charger
It’s a micro usb car charger. Nothing more to say. Always good to have a spare one.
The dock definitely DOES NOT accept the phone with any cases. Don’t know about skins though. It’s a pretty sung fit with. Going to head over to TMO sometime this week and pick up the a ZAGG Dry application skin and see.
Figured it would, but as soon as you slide the plug from the dock into the phone, it goes into car mode right away, even without it being plugged into a power source. This can be deactivated by going into notifications and clicking Deactivate Car mode.
All in all, I’d have to say I’m pretty pleased with it. Not really pleased about how much it costs, but hey…It would have been nice for them to include an audio cable with the package. I bought this to replace my older Garmin Nav. Figure it’s much easier having this than traveling with the Garmin.
Update: Looks like this is going back. The line-out doesn't work. Getting no sound
smellmyfingers said:
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
Click to expand...
Click to collapse
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Thinking of picking this up:
http://www.ebay.com/itm/Exogear-Exo...ccessories&hash=item588ef6bfb4#ht_4693wt_1270
Seems like a decent quality holder that will work no matter any case I use.
luckyduck69 said:
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Click to expand...
Click to collapse
Nope. Makes sense, T-Mobile just released the phone so they hiked up all prices on "new" accessories. It's all naming/branding my man.
Looks nice...if u get it post some pics please.
I have one but makes too much noise when the car moves.
Tmo Galaxy S2
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Was feeling frisky so picked it up at the store with the phone. Works great but the phone is held rather tightly and requires two hands to remove it when getting out of your car. Might loosen a bit over time, but a PITA for now. Phone also recognizes that this is a car dock (as opposed to desktop dock) and kicks on the VoiceTalk app automatically. Kind of nice.
-- edit --
Used a universal on my last phone... have to say that having the charger plug into the mount directly is hands-down worth the extra money. I hated having to find the dangling end of the usb cord every time I got in my truck... especially in the dark. With the made-for-it mount, you sit the phone in the mount and then slide the bottom part up which engages the charge and locks in the phone. All with one hand.
-GP
Dsmwookie said:
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Click to expand...
Click to collapse
Have one and the best part about this mount is that it sticks to almost part in my car. Aside from the really curved parts.
Bought my first car dock for my old Vibrant few months ago, now have to get it again for my new SGS2. Like before I am getting OEM directly from Samsung website. Not sure what TM sells but the one I saw in their store looks pretty crappy from some 3rd party vendor.
Sent from my SGH-T989 using xda premium
The car dock... excuse me, "vehicle navigation mount" I got at the t-mo store two days ago is a Samsung-branded accessory. Guy had to actually open the box that UPS delivered that morning. Perhaps your store didn't have them yet?
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
esdwa said:
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
Click to expand...
Click to collapse
they should start getting them in. There OEM it should be in green and white box with samsung all over it
$64,000 question: will it work with a case?
What do you think of these Herbert Richter German made windshield mount? The mount is used in a Pioneer AVIC-F500BT GPS which is quite heavy.
ctkatz said:
$64,000 question: will it work with a case?
Click to expand...
Click to collapse
Probably not as it is made to fit the device snugly. This is why I use a pouch belt clip as I use my phone all the time for navigation and can't be taking a case on and off every time.
My Exogear mint will be here tomorrow. I'll let you know how it is. Cost $18 shipped off Amazon.
Sent from my SGH-T989 using xda premium
Some quick shots of my Exogear mount. Sticks to just about any surface and holds most phones in a case. Video is uploading as we speak.
---------- Post added at 06:27 PM ---------- Previous post was at 05:44 PM ----------
http://youtu.be/PApQgF4Q8Lk
cheap but nice mount
Just rec this mount ordered 2 one for my s2 and one fr my wifes vibrant really pleased with them ordered one more {ebay}Samsung Galaxy S II T989 Heavy Duty Windshield Premium Car Mount Phone Holder
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Splaktar said:
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Click to expand...
Click to collapse
Are you referring to mine? It works with a case on.
Sent from my SGH-T989 using Tapatalk
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?
I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.
i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?
Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.
I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.
I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.
Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!
nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.
I sent an email to Expansys regarding Galaxy Nexus car dock. This is the response that I received
I do apologise the Car dock has been pushed back until late this month or early next.
Regards
Eric Smith
Technical/Customer Services Supervisor
Click to expand...
Click to collapse
So I need a car dock now. I really get bored off waiting for it.
Which dock do you suggest?
PS: I have GSM Galaxy Nexus
if your bored you can make your own.
there's a thread on here somewhere
oh wait...
it like a few threads down
Is this a joke?
Samsung is trying their hardest to kill the Nexus line, not that it was that big of a brand anyways.
http://forum.xda-developers.com/showpost.php?p=24626815&postcount=118
As you know the car dock also use the pogo pins, so maybe that also true for that dock, and again the OTA stopped from what I understand till the fix for signal issue in sleep mode.
*I don't know what about the HDMI dock, as it's use MHL fuctionality, but work only for video , better buy MHL adapter.
http://www.ebay.com/itm/Windscreen-...Accessories&hash=item33714fad14#ht_1976wt_922
No pogo charging, but I've got two and they are by far the best dock I've used so far. Also cheaper than dirt.
Arkon's Mobile grip is a good choice for the GNEX, they have a variety of mount bases (dash, windshield, lighter socket, cupholder, etc) and they're reasonably priced.
http://www.arkon.com/mobile-grip/mobile-grip-dashboard-mount-mg178.html
Magnet Mount
Magnet mount. I can't post an outside link but search for magnet mount at harbor freight to see it.
$4.99 at Harbor Freight. Small, Unobtrusive and works great. You can even put the little metal phone piece in between the phone and a case.
I hate those bulky plastic things.
I got the one from Verizon store and love it! Its perfect, fit and design. It don't vibrate when driving like all the ones I had in the past.
SKYLINESSUCK said:
http://www.ebay.com/itm/Windscreen-...Accessories&hash=item33714fad14#ht_1976wt_922
No pogo charging, but I've got two and they are by far the best dock I've used so far. Also cheaper than dirt.
Click to expand...
Click to collapse
will that work with a case on the phone?
I have (and love) the ProClips powered car mount. Excellent quality although a bit pricey.
Sent from my Galaxy Nexus using Tapatalk 2
svtfmook said:
will that work with a case on the phone?
Click to expand...
Click to collapse
Nope. It only kinda halfway works with the 2000mAH extended battery for GSM. It's pretty tight custom fit for the factory GSM phone. Not sure about CDMA.
SKYLINESSUCK said:
ebay.com/itm/Windscreen-Car-Mount-Samsung-Galaxy-Nexus-i9250-small-/220944379156?pt=PDA_Accessories&hash=item33714fad14#ht_1976wt_922
No pogo charging, but I've got two and they are by far the best dock I've used so far. Also cheaper than dirt.
Click to expand...
Click to collapse
I was thinking about buying one of these, didn't order one yet because i'm worried about instability when using the camera while driving. Could you shoot a video using your mount? If it's just as stable as the genuine mount this one will suit my purposes.
URPREY said:
I have (and love) the ProClips powered car mount. Excellent quality although a bit pricey.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Too bad they don't work with a case (or make a charging, width adjustable model like for the iphone)
---------- Post added at 01:46 PM ---------- Previous post was at 01:43 PM ----------
Shady Gambino said:
Arkon's Mobile grip is a good choice for the GNEX, they have a variety of mount bases (dash, windshield, lighter socket, cupholder, etc) and they're reasonably priced.
http://www.arkon.com/mobile-grip/mobile-grip-dashboard-mount-mg178.html
Click to expand...
Click to collapse
I'm considering modifying this so there are pogo pins in the right clamp and it charges when I put my phone (with diztronic case) in it.
jboonstra90 said:
I was thinking about buying one of these, didn't order one yet because i'm worried about instability when using the camera while driving. Could you shoot a video using your mount? If it's just as stable as the genuine mount this one will suit my purposes.
Click to expand...
Click to collapse
I'll try and get a video today. It's pretty sturdy so I don't think it'll be an issue even in my rough riding off road vehicle, but we'll see. I had concerns before I ordered it, but I figured for around $10, it was worth a shot.
SKYLINESSUCK said:
I'll try and get a video today. It's pretty sturdy so I don't think it'll be an issue even in my rough riding off road vehicle, but we'll see. I had concerns before I ordered it, but I figured for around $10, it was worth a shot.
Click to expand...
Click to collapse
How's the build quality? I bought a random car mount from a chinese website, after 2 weeks of usage, the suction cup broke off the car mount.
Very pleased with it. I bought two versions; the "short" one and the "long" one. If you poke around the sellers store you'll see. The short one is better IMHO. The long one can jiggle just a little do to the way the arm adjusts. The short one is pretty solid. Suction cup part is beefy and not going anywhere. I did break the little tab off the top/side you are supposed to push to help get the phone out, but that's because I was being unreasonable on how hard I was pushing it. I tried shaving the crap out of the holder to make it fit the extended battery, then shoe-horned it in there. Then it was stuck LOL. I broke the tab getting it out, but it's still very usable, and I was pushing too hard.
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130674625659
Arrived yesterday and waiting for me at the post office will update later
Sent from my Galaxy Nexus using xda premium
Shady Gambino said:
Arkon's Mobile grip is a good choice for the GNEX, they have a variety of mount bases (dash, windshield, lighter socket, cupholder, etc) and they're reasonably priced.
http://www.arkon.com/mobile-grip/mobile-grip-dashboard-mount-mg178.html
Click to expand...
Click to collapse
i have an arkon mount now, it's just a little too small for the gnex in a case, but it fits. it's a PITA to get in and out of the mount, but, i will say that the suction cup and mount itself are excellent quality and work great. i have had this mount for about a year and it has fit 3 different devices now, been through a few harsh seasons and i have never had it fall off. the arkon mounts are very much worth it. i think i paid $14 for my mount.
i have the diztronic case and arkon flat mount and it is snug but works great. a pogo pin mod for this setup would be awesome. please share if you get it done!
nomisunrider said:
Too bad they don't work with a case (or make a charging, width adjustable model like for the iphone)
I'm considering modifying this so there are pogo pins in the right clamp and it charges when I put my phone (with diztronic case) in it.
Click to expand...
Click to collapse
I'm using Mountek, which attaches through a CD slot and is really unobtrusive. No POGO, works with my Nexus in case.
http://www.amazon.com/Mountek-MT5000-C-Universal-Satellite-Devices/dp/B004E5W3D4
Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
I love this thing, it grips the device great, and the suction cup will go almost anywhere you want. I have mind suctioned to the top of my dash of my 08 dodge caliber. Even tho the dashboard is textured with some pretty deep ridges it sticks great!
Only con i would give it is that the grip is a little too tight, making one hand operation difficult. you can remove the device from the mount with one hand, however installing the phone into it usually requires use of your second hand to open the drip far enough. However it is a comfort knowing that it moto x isn't going to fall out.
SubliminalME said:
the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Teksu said:
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
Click to expand...
Click to collapse
My local Costco was selling a 2 pack of mounts that looked identical to this for $25 (after $5 instant savings) about 2 months ago. I'm not sure if they still have them, but of they do they aren't prominently displayed.
Sent from my Nexus 7 using Tapatalk
I think it would fit, actually.
Sent from my XT1049 using Tapatalk
Has it fallen off on you?
SubliminalME said:
Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Click to expand...
Click to collapse
SubliminalME said:
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Hey @SubliminalME, I recently picked one of these up, it does fit very well. Problem is that it either blocks the headphone jack or the charging port, depending on which way you put the phone in the mount. Have you found a way around this?
i bet you could drill a hole in the single mount pretty easily.
the better question (for me) is whether the phone can be positioned in the mount without blocking the camera. a windshield mount is only useful to me if i can use the camera. otherwise, it's going in a cupholder.
The Monoprice one is showing out of stock!! :/
UncleMike said:
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Click to expand...
Click to collapse
SubliminalME said:
I think it would fit, actually.
Click to expand...
Click to collapse
I ordered two of these and they came in the other day. Surprisingly, it fits well with the Seidio Dilex case. My concern was that there wouldn't be room for the integrated kickstand on the back of the case, bit there's just enough room for it.
I have an adhesive mounted Garmin-compatible ball (~17mm) on my dash that works perfectly with it.
i've got mine, but haven't taken it out of the box yet!
In for one
Thanks for the heads-up! Always have loved Monoprice and I can't bring myself to go the imagnet route (ie pop off the back) on the X. This should be a nice cheap compromise, especially since I already have the garmin ball installed in both my cars.
The best that I've ever used is the Tetrax Xway. PRevents the phone from overheating by clipping in front of the A/C, and works with nearly every phone/case combo. I've used it through my Droid Incredible, Galaxy S2, and Galaxy S4 GPE with numerous cases.
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
https://www.youtube.com/watch?v=awh6QP8-BBE
I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
aaronchi24 said:
I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
Click to expand...
Click to collapse
I hate how the magnector ones are very weak moving them laterally up and down. But its very strong if you try to pull it straight off.
aaronchi24 said:
I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
Click to expand...
Click to collapse
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
unk3 said:
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
Click to expand...
Click to collapse
The Magnector X adapter is $15 and the Magnector X cable is $18 so they are comparable in price and are higher quality than the ones you can get from China. I'm hoping I get a faster charge speed with this adapter than the one I have now.
unk3 said:
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
Click to expand...
Click to collapse
I prefer adapters. When the cable fails you swap out with another micro-usb. This is what I did with Apple lightning connectors as well. My wife has gone through several, but my son who uses a mucro-usb to lightning tip for his iPad has never needed me to buy him an expensive lightning cable . The point of failure is almost always going to be right where the cable meets the tip. If you can move that common failure point off your expensive adapter and on to your inexpensive usb cable it makes sense IMO.
I'm dying to know if the Magnector is tall enough to connect to a Z3C ensconced in a case. I haven't seen anyone definitively say whether it will or not. My Cruzerlite case and the phone itself should show up within the next couple of weeks at which point (I'm crossing my fingers) I'll find out everything works as I imagine it will.
A lot of people report that the Magnector adapter does not work with cases, and I can see why -- there is very little clearance between the charging surface and cable. Looking forward to hearing more about the Deff adapter.
I'm using a couple of cheapo ebay magnetic charging cables right now, which work fine and were cheap enough that they're virtually disposable so I don't care if they don't last long. I'm not expecting any adapter, however pricey, to be very stable laterally because the mag port was only really designed for the dock, which obviously holds the phone still while charging. AFAIK there is no official Sony magnetic charging cable, despite what ebay sellers want us to believe.
I got my deff and it is great. Enough clearance to fit with a case, strong magnet and produces more current than the cheap ones from China.
If you're looking for a good magnetic charger, pick up one of these adapters.
Sent from my D5803 using XDA Free mobile app
aaronchi24 said:
I got my deff and it is great. Enough clearance to fit with a case, strong magnet and produces more current than the cheap ones from China.
If you're looking for a good magnetic charger, pick up one of these adapters.
Click to expand...
Click to collapse
Sounds good, but boy are they expensive! Anyone know of a cheaper source than Amazon's sellers?
this looks like the charger i've been looking for, since none of the others have clearance for a case. thanks!
radiohead14 said:
this looks like the charger i've been looking for, since none of the others have clearance for a case. thanks!
Click to expand...
Click to collapse
All the cheapo Chinese ones I've tried have plenty of clearance for a case, and at $2 a pop I'm happy with them
pipspeak said:
All the cheapo Chinese ones I've tried have plenty of clearance for a case, and at $2 a pop I'm happy with them
Click to expand...
Click to collapse
can you link it?
drunkenmastera said:
can you link it?
Click to expand...
Click to collapse
Just search ebay for "sony magnetic cable" and a million options come up. In my (limited) experience they'll all fit more or less the same -- OK but by no means rock solid (I'm sire they're all made in the same Chinese factory). I did try modding one with a dremel tool to fit slightly better but now it doesn't work any more :cyclops: The best of my cheap bunch is the (slightly less cheap) Apple-style ones with a cylindrical head and in-line LED.
One thing to note... some (including my favorite) seem to have spring-loaded pins, so even though they stick out a bit from the charging head they will retract once in contact with the phone's charging pins.
I do want to try one of the Magnector-X cables, however. Looking at the design of the head it seems that it will be much more firmly attached to the phone because of the curved profile that matches the phone edge and gives a much greater area of contact. All the cheapies have a raised, flat charging surface so only the narrow magnet and pins are in contact with the phone. That means that however strong the magnet it's very easy for them to rock sideways and disconnect.
Dopes anyone have one of the newer Magnector -X cables (not he adapter)?
pipspeak said:
I do want to try one of the Magnector-X cables, however. Looking at the design of the head it seems that it will be much more firmly attached to the phone because of the curved profile that matches the phone edge and gives a much greater area of contact. All the cheapies have a raised, flat charging surface so only the narrow magnet and pins are in contact with the phone. That means that however strong the magnet it's very easy for them to rock sideways and disconnect.
Dopes anyone have one of the newer Magnector -X cables (not he adapter)?
Click to expand...
Click to collapse
I have both the cable and the adapter from Magnector, and the cable is way better in terms of staying on. I can pick up and use my phone with the cable without it disconnecting. It also works great while driving in my car mount. The adapter is good when just leaving it sit (charging overnight, for example).
The only drawback about the cable is that it's a bit shorter than I'd like, but that's easily solved with a USB extension cable. I've not tried any of the ebay ones, I wasn't too impressed from the comments of others in this forum.