Related
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Here are the files from Qmobile Noir A6 Shared By cellappfreak
Preloader.img
recovery.img
boot.img
logo.img
uboot.img
ebr1.img
ebr2.img
mbr.img
Downlod Dump Files :
http://d-h.st/AO3
http://d-h.st/Z3C
http://www.mediafire.com/?vaq8mrcsq9gszk4
to much !!!!
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
Click to expand...
Click to collapse
borng dude.... nd also heavy.. post smtng easyest day.
Can u tell me dear how it is boring?
Sent from my A6 using xda premium
Nice tutorial and Thanks for sharing with us
Thanks dear.
Sent from my A6 using xda premium
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Click to expand...
Click to collapse
pls help me with the sp tool i m unable to understand it n my a68 is bricked without CWM so pls help me n also how to go in download mode
tried this and bricked my device already. cant even boot on recovery. when i go to Memory Test, it gives error that it cant find External Ram.
can u provide me the download link of backup?
jompha said:
tried this and bricked my device already. cant even boot on recovery. when i go to Memory Test, it gives error that it cant find External Ram.
can u provide me the download link of backup?
Click to expand...
Click to collapse
Go to my signature: Micromax A68
prasad12ka4 said:
Go to my signature: Micromax A68
Click to expand...
Click to collapse
sorry. my device is not Micromax A86 or Symphony W60.
Its Symphony W20 with MT6575 Processor. 256MB RAM, 3.5", 512ROM, 2MP Cam
from where can i download drivers???
---------- Post added at 04:41 PM ---------- Previous post was at 04:37 PM ----------
i meant the mediatek vcom drivers....from where can i download it???
i need help
a i dont noe to load file when i go to app and hit create new script and then types the name and then i hit load file it shows that plz select the .sh file i need ur help man.
noir a6 messed up ROM
UMAIR_ARSHAD said:
Can u tell me dear how it is boring?
Sent from my A6 using xda premium
Click to expand...
Click to collapse
umair plz provide me with the scatter file of noir a6 because my ROM is completely messed up! if u can just provide me with a link even thats fine i just want the scatter file!
wait. i will provide u whithin 24 hours.
Sent from my IM-A830L using xda premium
PRELOADER 0x0
{
}
DSP_BL 0x40000
{
}
MBR 0x600000
{
}
EBR1 0x604000
{
}
__NODL_PMT 0x660000
{
}
NVRAM 0xa60000
{
}
__NODL_SECCFG 0xd60000
{
}
UBOOT 0xd80000
{
}
BOOTIMG 0xde0000
{
}
RECOVERY 0x13e0000
{
}
SEC_RO 0x19e0000
{
}
__NODL_MISC 0x1fe0000
{
}
LOGO 0x2040000
{
}
__NODL_EXPDB 0x2340000
{
}
EBR2 0x23e0000
{
}
ANDROID 0x23e4000
{
}
CACHE 0x224e4000
{
}
USRDATA 0x425e4000
{
}
__NODL_FAT 0x626e4000
{
}
__NODL_BMTPOOL 0xffff0050
{
}
Sent from my IM-A830L using xda premium
this the scatter file of a6 .copy the text into notepad ++ and save it as .txt file
Sent from my IM-A830L using xda premium
Reply
UMAIR_ARSHAD said:
this the scatter file of a6 .copy the text into notepad ++ and save it as .txt file
Sent from my IM-A830L using xda premium
Click to expand...
Click to collapse
Thank YOu Very Much umair
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Click to expand...
Click to collapse
I hard bricked my phone even I uploaded wrong pre loader my A6 was not booting, nor charging, even not detected by computer, I thought I have lost my phone, luckily it was under warranty, I went to Q shop gave them my phone and they repaired it, wow thanks to Qmobile there is a way those who have still warranty left can have the phone back in working condition, goto Qmobile they will do.
I will request you if anyone can please provide the dump of Qmobile A6 reason i bricked my phone i didnt find the dump of A6 stock rom and used wrong preloader of Micromax A68.
Stock Dump
cellappfreak said:
I hard bricked my phone even I uploaded wrong pre loader my A6 was not booting, nor charging, even not detected by computer, I thought I have lost my phone, luckily it was under warranty, I went to Q shop gave them my phone and they repaired it, wow thanks to Qmobile there is a way those who have still warranty left can have the phone back in working condition, goto Qmobile they will do.
I will request you if anyone can please provide the dump of Qmobile A6 reason i bricked my phone i didnt find the dump of A6 stock rom and used wrong preloader of Micromax A68.
Click to expand...
Click to collapse
I have an A6 but i cant provide with stock dump because
1. M not using Stock ROM! i am using iMjelly ROM for a6! (u can find on google " iMjelly ROM " )
2. mjh se ye script nae chal rahi! so i cant create a dump!
Img files to unbrick Qmobile A6
Here are the files from My Qmobile Noir A6
Preloader.img
recovery.img
boot.img
logo.img
uboot.img
ebr1.img
ebr2.img
mbr.img
here are the download links
http://d-h.st/AO3
http://d-h.st/Z3C
http://www.mediafire.com/?vaq8mrcsq9gszk4
I hard bricked my A6 and was unable to find these files especially preloader to unbrick my phone, now, its for u all unbrick ur A6
If it helps anyone dont forget to click on thanks
very nice work....
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse
Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse
Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse
Reserved
Reserved
Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me
Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks
English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards
at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while
Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks
CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard
Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download
Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!
Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account
LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?
Install Gummy TWRP 2.7.1.0 Based Recovery on Oppo Find 7 (X9077/X9076)
Warning: Note: No one but yourself is responsible for what you do to your device.
X9077 = Chinese TD-LTE support // X9076 = EU FDD-LTE or US FDD-LTE support
Requirements:
Download / unzip the file --> AndroidSDKSlim.zip
Download this file --> Gummy-TWRP-2.7.1.0-find7.img
Make sure you have a charged battery (50 % minimum)
How to install:
Connect your phone to your PC. You should see a window with the drivers in an application called 'setup.exe '.
Start the installation process and wait until it ends. then disconnect the phone from the PC.
Extract the contents of the file ' AndroidSDKSlim.zip ' on your desktop. You should have a folder named ' android-sdk-windows ' where there is another folder: 'platform-tools.'
In this folder, move the .img files you downloaded ( Gummy-TWRP-2.7.1.0-find7.img)
Turn off your mobile.
Restart your mobile in fastboot mode by pressing the High Volume + Power buttons until the appearance of the word ' Fastboot ' .
Connect your phone to your PC via the USB cable.
In platform-tools folder 'with your mouse, do' right click 'while holding down the 'Shift ' button, then select ' Open a command window here . '
In this window, type the following code to verify that your device is recognized.
Code:
fastboot devices
Then type the following command to install the TWRP :
Code:
fastboot flash recovery Gummy-TWRP-2.7.1.0-find7.img
Do not reboot your phone, but just flash the "UPDATE-SuperSU-v2.01.zip " to gain root !
How to root :
Just download the attached file --> UPDATE-SuperSU-v2.01.zip
Copy/paste it on your memory phone
Reboot into recovery mode
Flash the file & next reboot your phone
Enjoy ! You're root !
Note: If don't work, try the " [11-07-2014 UPDATE Thread] How to get ROOT with ColorOS v1.2.3i on X9076/X9077/X9007/X9006 " section from this THREAD
Credits & Thanks
papi92
Team Gummy
Chainfire
dhacker29
EthanChen
Your feedback is welcome
Fantastic!
Great news!
Thanks for the instructions. Can anyone confirm if this works on the Find 7 X9076?
Just tested and it works great [Find 7 X9076].
Recovery and root access. Done!
Thank You. :good:
I can load the recovery, but as soon as I press Volume + or - within the recovery I have the following error message:
E:touch_calibrate: EVIOCGABS failed
From there on, if I initiate the touch screen UI by touching any part of the screen, I can no longer use Volume +/- and Power button combination properly. as soon as I use any of those button, it just automatically launch the first option that is on whatever the recovery menu is.
Am I the only one having this issue?
Thank you. This worked. (Find 7 X9076)
kingcedz said:
I can load the recovery, but as soon as I press Volume + or - within the recovery I have the following error message:
E:touch_calibrate: EVIOCGABS failed
From there on, if I initiate the touch screen UI by touching any part of the screen, I can no longer use Volume +/- and Power button combination properly. as soon as I use any of those button, it just automatically launch the first option that is on whatever the recovery menu is.
Am I the only one having this issue?
Click to expand...
Click to collapse
Same here. Got the error, unsure if I had exactly the same problem as you.
binaryfalcon said:
Thank you. This worked. (Find 7 X9076)
Same here. Got the error, unsure if I had exactly the same problem as you.
Click to expand...
Click to collapse
can you try use go into the recovery, use the touch screen on any of the option, then try volume+ or volume - or power button? when I do that, it just automatically press the 1st available option on the menu.
kingcedz said:
can you try use go into the recovery, use the touch screen on any of the option, then try volume+ or volume - or power button? when I do that, it just automatically press the 1st available option on the menu.
Click to expand...
Click to collapse
Confirmed. Seems like I went through the same problem, since it selected reboot twice earlier.
binaryfalcon said:
Confirmed. Seems like I went through the same problem, since it selected reboot twice earlier.
Click to expand...
Click to collapse
ok thanks, at least that is consistent between phones. Unfortunately i m not smart enough to do any fixings, hope this get highlighted and resolve in the future version of the recovery.
Yeah, it's still early though. Just glad it's working this well.
Hi,
Worked fine for me, thanks for the clear easy to follow guide. I noticed the error E:touch_calibrate: EVIOCGABS failed on the screen but all movements in the recovery seemed fine, I used physical keys first then tried the touch screen and that worked too.
At the end of the process it asks if you want to prevent the ROM from flashing the default recovery, I choose yes. Might be worth adding that for completeness as some people might be unsure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 09:54 PM ---------- Previous post was at 09:37 PM ----------
Just been back into the recovery to do a backup. Which ever button you press you get the error but all the buttons work fine. This sounds like a daft question but you are not getting the buttons back to front are you. On the Find 7 the volume buttons and power buttons are reversed to a lot of phones and it's easy to press power instead of volume.
Sorry if this is not the case. It's just it seems to respond to everything for me and that might explain why you were entering on the first option. Could you double check?
worked for me too
Works great on X9076, thanks OP!:good:
after that we must return to stock recovery if we want to update via ota?
No. I received an update yesterday when I reverted to.colorOS but kept the gummy recovery
Sent from my X9076 using XDA Premium 4 mobile app
Worked on the X9077 too but it didn't recognise my exFAT formatted external card...
Also, like TWRP, it's half size.... Which proves it's not the size but how you use it that matters...:laugh:
ultramag69 said:
Worked on the X9077 too but it didn't recognise my exFAT formatted external card...
Also, like TWRP, it's half size.... Which proves it's not the size but how you use it that matters...:laugh:
Click to expand...
Click to collapse
lol it's the true
Tks for your feedback . Try with another external sd card...
scumpicule said:
lol it's the true
Tks for your feedback . Try with another external sd card...
Click to expand...
Click to collapse
I think it doesn't like exFAT, FAT32 seems to work ok but that seems silly to me to have a kickass hd screen and not use it with hd movies...
Stock Recovery
How can I backup my Stock recovery image before flashing this. Or is the Stock X9076 Recovery already available for download?
Can official Oppo Stock Roms (ColorOS 1.2.1i for example) be installed with this recovery?
Fasboot not working
which system did you use it?
- I tried to Windows 8.1 x64 with USB 3, and I could not find the find 7 (x9076). No detect the phone.
Do you have any idea, how I can use it?
gazsyka said:
which system did you use it?
- I tried to Windows 8.1 x64 with USB 3, and I could not find the find 7 (x9076). No detect the phone.
Do you have any idea, how I can use it?
Click to expand...
Click to collapse
Use Win 8.1 64bit too.
Make sure you are going to fastboot on the phone by pressing up volume +power until Oppo logo appears, release power but keep holding up volume, you should see fastboot on the screen...
Using the ADB files, make sure you open the files until you can see the .exefiles, it helps to have the file you wish to flash in there too, and hold "shift" key down while right clicking on white space in the window. Choose "open command window here".
Connect the Find 7 to the PC & type "Fastboot Devices" in command propmt. You should get a serial number and device found or something, if you don't try a new cable or usb port...
Once the phone has been detected type "fastboot flash recovery "the file name of the recovery.img", to make it easy, the file needs to be in the ADB file and after you type the 1st letter of the file you want to flash, press "tab" it will autofill the filename (just make sure you have different names for the files).
Then you can follow the other instructions with Supersu to get root....
Hi everyone, We rooted the Alcatel OT Pop S7 !
thanks goes to my friend @danycmoi who helped me to get this device rooted !
Reminder : We are not responsible if your device get damaged while rooting it...
Click to expand...
Click to collapse
Here's all you need :
- Recovery.img+le Scatter File (For POP S7 ONLY) : http://d-h.st/BPN (You can try it on Vodafone Smart4Power but backup your phone first !)
- Root_KitKat_4.4.zip : http://d-h.st/vkQ
- MTK Driver_Auto_Installer_v1.1236.00 : http://d-h.st/p3m
- SP FlashTools V5.XX : http://mtk2000.ucoz.ru/down11/SP_Flash_Tool_v5.1352.01.rar
How to flash :
0- Copy "Root_Kitkat_4.4.zip" in your SD card.
1- Make sure you have USB debug option checked (in settings/developpers options).
2- Open and install the MTK Auto-Drivers
3- Turn off your phone and connect it to your computer (this will load up the MTK drivers).
4- Remove your phone from computer and make sure its turned off
5- Make sure you have extract "SP Flash Tools" and "recovery.img+scatter.zip"
6- Run SP Flash Tools AS ADMIN
7- Click on "scatter-loading" and select "MT6582_Android_scatter_emmc.txt " from the previously extracted "recovery.img+scatter.zip"
8- Check "RECOVERY" box ONLY, double click on the empty green space on this line and select the file "recoveryCWM__Alcat_POP_S7.img"
9- Click the "Download" button
10- Connect the phone (make sure it was turned off)
You'll see a red line loading and then a yellow line loading. At the end, you will see a green circle saying "OK" !
Congratulation, you have installed the CWM Recovery !
Now, let's root it :
11- Remove the USB cable
12- Turn on you phone by holding VOL+ and POWER button - You will enter the CWM recovery !
13- Select "install zip from SD Card"
14- Select the file "Root_KitKat_4.4.zip" and confirm its installation.
15- Select "reboot to system now"
Your device is now rooted ! Congratulations !
Stock Recovery :
If you want to get the stock recovery back, there you go : http://d-h.st/Fun
About OTA Updates
Alcatel released one more OTA update, you can't flash it directly.
However, here is the .zip (http://d-h.st/Dcc) update 0003 for PopS7, i flashed it with CWM !
It didn't first work because i deoxeded my phone, so i flashed system.img back and it worked.
Warning : This will flash a new recovery, you can flash CWM again using SP Flash Tools.
You can try this EXPERIMENTAL .zip with no recovery flashing (didn't test it) : http://d-h.st/9NSA
They updated some libs (like camera) and some system apps.
Don't forget to thanks my friend @danycmoi
Tuto
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Danycmoi
do you have the stock recovery img too?
awesome cwm. works for alcatel's "clone" (vodafone smart power). installed root right now
when we see a android lollipo costom rom for this phone?
costyprj said:
when we see a android lollipo costom rom for this phone?
Click to expand...
Click to collapse
I doubt it would be anytime soon but I would very much like to see cyanogenmod 11 for this phone.
I don't know about android 5.0 and we don't yet have any custom rom !
I think, there will be problems while porting rom because there are only a few mt6582 phones with LTE support... There's a CM11 build for mt6589 but we are far from getting it in our PopS7.
MTK devices are becoming more customisable with time! This is a good point !
Here is stock recovery : http://d-h.st/Fun
Can't we port it from android l? Same mt6582 chipset.
Links are dead!
@vickdu31 the links are dead, i tried downloading and it says: This account's public links are generating too much traffic and have been temporarily disabled!
The recovery its working on the branded Vodafone same phone? Thanks!
Hi all, i'm uploadig files again.
I didn't try it in the vodafone, If you backed up your recovery, you can give it a try . @Andrei221 says it's working !)
@Andrei221 , i don't really understand what you mean. Porting android L ? We didn't port any rom to it yet ! You can start working on something if you want but i think our chipset is a bit different than classir MT6582 because it has 4G LTE support !
Backup
Hi @vickdu31 . Thank you for re-uploading the links. I`m trying to backup my stock rom from Vodafone. I created the scatter file with MTK Droid Tools. I want to get boot.img and recovery.img but they are 20 MB the both. When i try to create CWM recovery with MTK Droid Tools, loading the files boot.img and recovery.img in right log it says :
- Boot kernel version =3.4.67
It is created: C:\Users\Bogdan\Downloads\mtkd\MtkDroidTools\recovery\vvff_boot_patched_141130-123050.img
It is created: C:\Users\Bogdan\Downloads\mtkd\MtkDroidTools\recovery\vvff_recovery_141130-123050.img
--- ERROR :Recovery doesn't match by the size
--- task is complete ---
Click to expand...
Click to collapse
I dont know why they are 20 MB. Can you help me with this? Thank you!
The stock recovery images are 20mb indeed.
But just flash the recovery from the topic. I have vodafone and IT works flawlessly
Recovery and boot
I think its working now,
It is created: C:\Users\Bogdan\Downloads\mtkd\MtkDroidTools\recovery\Vodafone-985N_140606__boot_patched_141130-124415.img
--- test recovery OK !
It is created: C:\Users\Bogdan\Downloads\mtkd\MtkDroidTools\recovery\Vodafone-985N_140606__recovery_141130-124415.img
--- task is complete ---
Click to expand...
Click to collapse
They have 5.43 MB boot patched and 6.10 MB recovery image.
---------- Post added at 01:14 PM ---------- Previous post was at 12:47 PM ----------
Now when i try to flash the cwm recovery image it says : pmt changed for the rom it must be downloaded. Do you know why? I dont understand what that means.
I dont know how can i flash the cwm, it keeps this error: pmt has changed, i tried to remove from the scatter the preloader part, but no use. Maybe someone can help! Thank you!
Finally, i have used your scatter file and its working, but when i`m trying to backup the stock rom it says :
- nodl_otp - ERROR : Zero file, no space left on device!
--- We keep folders contents copying on PC
- /data/nvram
- /system
--- task end with ERROR ---
Click to expand...
Click to collapse
What is that error? I had prepare blocks for Flash Tool and its copied everything.
Stock recovery is 20mb but the custom recovery is 6.xx mb this is normal. Partition size is 20mb but you can flash the cwm anyway ! You need a scatter that end with ...emmc.txt
vickdu31 said:
Stock recovery is 20mb but the custom recovery is 6.xx mb this is normal. Partition size is 20mb but you can flash the cwm anyway ! You need a scatter that end with ...emmc.txt
Click to expand...
Click to collapse
Thank you vickdu31! And how can i find or create the scatter with the ending emmc?
Check this link : http://www.china-devices.com/Thread-ROOT-CWM-Readback-your-ROM-with-SP-Flash-Tools?pid=3380
Especially the video.
If you have mtk droid tools, download it again from this page. I think they have different versions.
This will show you how to create your scatter file proprely.
https://translate.googleusercontent...g=ALkJrhiSbucfX_2TazOcol8OTGniQY6Jvg#p1533986
i saw that there is an update for this phone but my ote does not recieve it. can somebody give me the update.zip ?
LE: nevermind, i didn't read the first post. thanks, but i cannot install it. package fingerprint error
Hi, is your phone alcatel or vodafone ?
This OTA update apply only on the alcated.
Try to rename the file update.zip and you can also try the other file and rename it too.
Maybe each phone needs his own update.zip from OTA, i don't know !
Scatter and CWM
vickdu31 said:
Check this link : http://www.china-devices.com/Thread-ROOT-CWM-Readback-your-ROM-with-SP-Flash-Tools?pid=3380
Especially the video.
If you have mtk droid tools, download it again from this page. I think they have different versions.
This will show you how to create your scatter file proprely.
Click to expand...
Click to collapse
Hi! I have done exactly as in the video, the same method with mtk droid tools, i had installed pdanet drivers, read blocks and created the scatter file, i`ve made the cwm, but when i try to download with sp flash tools it says:
Code:
pmt changed for the rom it must be downloaded
I dont know where i`m getting wrong!
Team Win Recovery Project 3.0.2-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxyj72016exynos.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
CHANGES
v3.0.2-0 - Initial build on twrp.me
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/jcadduono/android_device_samsung_j7xelte (android-6.0)
Kernel: https://github.com/jcadduono/android_kernel_samsung_exynos7870 (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
@jcadduono ,
Thanks for official TWRP.
Hello guy !
@jcadduono , thank you very much for great work ! It's fully working for my SM-J710FN
My internal storage doesnt mount. Requires to format data. And when i format the data, it becomes ok, and when you try to enter recovery again it doesnt mount the data, internal storage..
Sent from my SM-J710GN using XDA-Developers mobile app
Not sure if both are related but I had flashed this TWRP 4-5 days back. Last night after reboot (wasn't the 1st one after flashing certainly), phone didn't boot because of custom binary FRP lock. Had to reflash firmware.
@jcadduono why is the internal storage is not showing and why data is not mounting it gives always error
Amit.A said:
@jcadduono why is the internal storage is not showing and why data is not mounting it gives always error
Click to expand...
Click to collapse
jhampzkidoodle said:
My internal storage doesnt mount. Requires to format data. And when i format the data, it becomes ok, and when you try to enter recovery again it doesnt mount the data, internal storage..
Sent from my SM-J710GN using XDA-Developers mobile app
Click to expand...
Click to collapse
Normally on the newer Samsung devices we can flash https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt/ and then go to the wipe page and use [Format Data] to turn off encryption.
It seems there is a bug with the Exynos 7870 devices that causes vold to encrypt the device regardless of whether or not boot image fstab actually calls for encryption, and I've tried removing all hints of encryption support from the boot image and yet still the system will start encrypting on the next boot.
TWRP does not support Samsung's closed off encryption as it relies on the Android OS frameworks.
I've tried submitting this issue to Samsung's Mobile Security team but they just shrugged it off and said you can't turn it off on purpose.
So pretty much you're SOL for data partition (internal storage is inside that) reading in TWRP until someone comes along with system modifications to disable encryption or a custom ROM.
Hi bro... @jcadduono
Thanks for making Official TWRP Recovery for our J7 2016. Really its great work Thanks again. :good:
I have a 2016 SM-J700P... with the Exynos processor. Will this TWRP work for me?
Guys, will the fact that I now have TWRP recovery (I have a J7 J700M Model, from Brazil), using Android 5.1.1 -> Android 5.1.1 (debloated) cause any harm if I try to install 6.0.1 Marshmallow (http://live.samsung-updates.com/index.php?device=SM-J700M) using ODIN??
Thanks!
@jcadduono with the custom kernel http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736 encryption can be turned off.
thewinelover said:
I have a 2016 SM-J700P... with the Exynos processor. Will this TWRP work for me?
Click to expand...
Click to collapse
I doubt it, it has different exynos processer
artssa said:
Guys, will the fact that I now have TWRP recovery (I have a J7 J700M Model, from Brazil), using Android 5.1.1 -> Android 5.1.1 (debloated) cause any harm if I try to install 6.0.1 Marshmallow (http://live.samsung-updates.com/index.php?device=SM-J700M) using ODIN??
Thanks!
Click to expand...
Click to collapse
Offtopic post you have. Shouldn't be a problem for flashing a firmware for your device via Odin, whichever ROM you are using.
Join us Samsung Galaxy J7 2016 users Samsung Galaxy J7 ? Official Group in Telegram
Here you can chat with anyone.
Here many xda developers are present.
Here you can share any kind of data and files in any size.
And the biggest thing is that here you will get instant solution to any problem. :good:
Telegram Group Link : https://telegram.me/joinchat/Cmh8LUAs6AFEJUfawPCiWg
Regard by @KeMii :good:
I Root the Device but After root there were many issues..... I Keep on getting an notification that unauthorized action ...
and also my device keeps lagging it lags just for a second but this games every 2-3 mins
I also freezed KNOX with lucky patcher but the problem still persists any meathod to solve the problem Thanks
Installed Xposed... Few Modules and Partition Crushed... It was my Brand NEW Phone :'(
Hello, TWRP backup not properly block set. The size of EFS equal to 4 MB in size, inside the reserve of zeros.
No IMEI as all zeros!
Need to fix, or put my. In my TWRP you can flash system.img from firmware.
Good luck to everyone! TWRP is correctly bekapit EFS.
Extract postcode to flash the IMG.
http://4pda.ru/forum/index.php?s=&showtopic=763247&view=findpost&p=51990201
Here you can find a lot of useful for this smartphone. Please forgive me for my English :laugh:
The Lord does not forget to thank! And then I see the downloading is not weak and thanks to zero.
ermakovermakov7878 said:
Hello,your TWRP backup is not correct unit is specified. The efs size is equal to 4MB, inside backup zeros.
I took apart and tell it like it is. That's correct TWRP backup efs + setting backup System.img
Unpack the zip to flash the img.
http://4pda.ru/forum/index.php?s=&showtopic=763247&view=findpost&p=51990201
Here you can find a lot of useful for this smartphone.
Please excuse me for my English :laugh:
Click to expand...
Click to collapse
But it is all in russian :/
Will this work with J7-2016 with Snapdragon 617 ?
Skylinestar said:
Will this work with J7-2016 with Snapdragon 617 ?
Click to expand...
Click to collapse
No
will it work on Galaxy J7 prime ? it has same exynos 7870..
jcadduono said:
Team Win Recovery Project 3.0.2-0
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
Click to expand...
Click to collapse
i have SM-J710FN. if I only follow below 3 steps, then will i b able to root my device ??
1. allow usb debugging and OEM unlock
2. flash official TWRP via Odin ... then re insert battery & reboot into TWRP
3. wipe data in TWRP and then falsh SuperSU via TWRP
is it enough.. Do I need to flash kernels first ??