Install Gummy TWRP 2.7.1.0 Based Recovery on Oppo Find 7 (X9077/X9076)
Warning: Note: No one but yourself is responsible for what you do to your device.
X9077 = Chinese TD-LTE support // X9076 = EU FDD-LTE or US FDD-LTE support
Requirements:
Download / unzip the file --> AndroidSDKSlim.zip
Download this file --> Gummy-TWRP-2.7.1.0-find7.img
Make sure you have a charged battery (50 % minimum)
How to install:
Connect your phone to your PC. You should see a window with the drivers in an application called 'setup.exe '.
Start the installation process and wait until it ends. then disconnect the phone from the PC.
Extract the contents of the file ' AndroidSDKSlim.zip ' on your desktop. You should have a folder named ' android-sdk-windows ' where there is another folder: 'platform-tools.'
In this folder, move the .img files you downloaded ( Gummy-TWRP-2.7.1.0-find7.img)
Turn off your mobile.
Restart your mobile in fastboot mode by pressing the High Volume + Power buttons until the appearance of the word ' Fastboot ' .
Connect your phone to your PC via the USB cable.
In platform-tools folder 'with your mouse, do' right click 'while holding down the 'Shift ' button, then select ' Open a command window here . '
In this window, type the following code to verify that your device is recognized.
Code:
fastboot devices
Then type the following command to install the TWRP :
Code:
fastboot flash recovery Gummy-TWRP-2.7.1.0-find7.img
Do not reboot your phone, but just flash the "UPDATE-SuperSU-v2.01.zip " to gain root !
How to root :
Just download the attached file --> UPDATE-SuperSU-v2.01.zip
Copy/paste it on your memory phone
Reboot into recovery mode
Flash the file & next reboot your phone
Enjoy ! You're root !
Note: If don't work, try the " [11-07-2014 UPDATE Thread] How to get ROOT with ColorOS v1.2.3i on X9076/X9077/X9007/X9006 " section from this THREAD
Credits & Thanks
papi92
Team Gummy
Chainfire
dhacker29
EthanChen
Your feedback is welcome
Fantastic!
Great news!
Thanks for the instructions. Can anyone confirm if this works on the Find 7 X9076?
Just tested and it works great [Find 7 X9076].
Recovery and root access. Done!
Thank You. :good:
I can load the recovery, but as soon as I press Volume + or - within the recovery I have the following error message:
E:touch_calibrate: EVIOCGABS failed
From there on, if I initiate the touch screen UI by touching any part of the screen, I can no longer use Volume +/- and Power button combination properly. as soon as I use any of those button, it just automatically launch the first option that is on whatever the recovery menu is.
Am I the only one having this issue?
Thank you. This worked. (Find 7 X9076)
kingcedz said:
I can load the recovery, but as soon as I press Volume + or - within the recovery I have the following error message:
E:touch_calibrate: EVIOCGABS failed
From there on, if I initiate the touch screen UI by touching any part of the screen, I can no longer use Volume +/- and Power button combination properly. as soon as I use any of those button, it just automatically launch the first option that is on whatever the recovery menu is.
Am I the only one having this issue?
Click to expand...
Click to collapse
Same here. Got the error, unsure if I had exactly the same problem as you.
binaryfalcon said:
Thank you. This worked. (Find 7 X9076)
Same here. Got the error, unsure if I had exactly the same problem as you.
Click to expand...
Click to collapse
can you try use go into the recovery, use the touch screen on any of the option, then try volume+ or volume - or power button? when I do that, it just automatically press the 1st available option on the menu.
kingcedz said:
can you try use go into the recovery, use the touch screen on any of the option, then try volume+ or volume - or power button? when I do that, it just automatically press the 1st available option on the menu.
Click to expand...
Click to collapse
Confirmed. Seems like I went through the same problem, since it selected reboot twice earlier.
binaryfalcon said:
Confirmed. Seems like I went through the same problem, since it selected reboot twice earlier.
Click to expand...
Click to collapse
ok thanks, at least that is consistent between phones. Unfortunately i m not smart enough to do any fixings, hope this get highlighted and resolve in the future version of the recovery.
Yeah, it's still early though. Just glad it's working this well.
Hi,
Worked fine for me, thanks for the clear easy to follow guide. I noticed the error E:touch_calibrate: EVIOCGABS failed on the screen but all movements in the recovery seemed fine, I used physical keys first then tried the touch screen and that worked too.
At the end of the process it asks if you want to prevent the ROM from flashing the default recovery, I choose yes. Might be worth adding that for completeness as some people might be unsure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 09:54 PM ---------- Previous post was at 09:37 PM ----------
Just been back into the recovery to do a backup. Which ever button you press you get the error but all the buttons work fine. This sounds like a daft question but you are not getting the buttons back to front are you. On the Find 7 the volume buttons and power buttons are reversed to a lot of phones and it's easy to press power instead of volume.
Sorry if this is not the case. It's just it seems to respond to everything for me and that might explain why you were entering on the first option. Could you double check?
worked for me too
Works great on X9076, thanks OP!:good:
after that we must return to stock recovery if we want to update via ota?
No. I received an update yesterday when I reverted to.colorOS but kept the gummy recovery
Sent from my X9076 using XDA Premium 4 mobile app
Worked on the X9077 too but it didn't recognise my exFAT formatted external card...
Also, like TWRP, it's half size.... Which proves it's not the size but how you use it that matters...:laugh:
ultramag69 said:
Worked on the X9077 too but it didn't recognise my exFAT formatted external card...
Also, like TWRP, it's half size.... Which proves it's not the size but how you use it that matters...:laugh:
Click to expand...
Click to collapse
lol it's the true
Tks for your feedback . Try with another external sd card...
scumpicule said:
lol it's the true
Tks for your feedback . Try with another external sd card...
Click to expand...
Click to collapse
I think it doesn't like exFAT, FAT32 seems to work ok but that seems silly to me to have a kickass hd screen and not use it with hd movies...
Stock Recovery
How can I backup my Stock recovery image before flashing this. Or is the Stock X9076 Recovery already available for download?
Can official Oppo Stock Roms (ColorOS 1.2.1i for example) be installed with this recovery?
Fasboot not working
which system did you use it?
- I tried to Windows 8.1 x64 with USB 3, and I could not find the find 7 (x9076). No detect the phone.
Do you have any idea, how I can use it?
gazsyka said:
which system did you use it?
- I tried to Windows 8.1 x64 with USB 3, and I could not find the find 7 (x9076). No detect the phone.
Do you have any idea, how I can use it?
Click to expand...
Click to collapse
Use Win 8.1 64bit too.
Make sure you are going to fastboot on the phone by pressing up volume +power until Oppo logo appears, release power but keep holding up volume, you should see fastboot on the screen...
Using the ADB files, make sure you open the files until you can see the .exefiles, it helps to have the file you wish to flash in there too, and hold "shift" key down while right clicking on white space in the window. Choose "open command window here".
Connect the Find 7 to the PC & type "Fastboot Devices" in command propmt. You should get a serial number and device found or something, if you don't try a new cable or usb port...
Once the phone has been detected type "fastboot flash recovery "the file name of the recovery.img", to make it easy, the file needs to be in the ADB file and after you type the 1st letter of the file you want to flash, press "tab" it will autofill the filename (just make sure you have different names for the files).
Then you can follow the other instructions with Supersu to get root....
Related
Dear Friends,
After my hectic work load I was trying to concentrate on solving the Camera problems when I submitted Aroma based Rom following "bgcngm" of his " [ROM][03-08-2013] ZTE V987 (MT6589) custom ROMs (JB)".
It met with difficulties of Camera problem when was trying to fix it. In the mean time I experimented with several other Rom that has the same board features of MicroMax Canvas 4 -A210. Though many of them are booting but they had one or other problems. Then I copied the required ediiting by copying and pasting in the stock rom to make the phone booting with all its stock performance. All these days, most of them might have used to do with the stock version, I retained the stock version and build the ROM in the other way round.
The Rom is up loaded to Google Drive and the url is given.
TUTORIAL:
PLEASE BACK UP / PERFORM NANDROID BACKUP YOUR ROM BEFORE FLASING THIS ROM FOR SAFTY
Some time you loose your IMEI, kindly back it up using the Mobileuncle mtk tool.
1. If you are not used for Smart Phone Flash Tool(SPFT), then you can directly flash using the flash tool facility provided in the phone. Put off your Phone. Wait for about half or one minute or till the phone vibrates. Hold simultaneously the Volume up/down button and Power button and touch the home touch key. Then the phone displays two option.
Recovery Mode - Volume up
Factory mode - Volume down
Press the volume up and 3 option will pop up and in the middle you can find the Fastboot Mode. Pressing volume down you can get into the Fastboot Mode. Now open the folder "direct cwm flash 5.5.0.4" and double click on the file "fastboot flash.bat". Now you have installed the CWM Recovery 5.5.0.4 into your phone.
2. If you are on stock version of the ROM or in custom ROM, just copy the XXXmicMAX.zip file into your external sdcard.
3. As the rom is only partially rooted it is necessary to Root the phone externally. I will upload a rooted version in couple of days. To Root the phone I have provided the UPDATE-SuperSU-v1.65.zip. Copy this file to your external Sd card.
4.By pressing volume up/down, power and touching the home key get into the CWM recovery mode.
I. Choose install zip from sd card and then choose zip from sd card. Select the zip file XXXmicMAX.zip file you have just coped and install it. Wait for about a minute or two.
2. After the Update is completed again you go to the file UPDATE-SuperSU-v1.65.zip and install.
3. After installation of these two file you reboot your phone.
The phone will boot with screen showing Android is updating.
Enjoy.
url: 1. https://drive.google.com/folderview?id=0Bz8Fgu4wkBnqMTNndkRjRFBGSzg&usp=sharing .... "direct cwm flash 5.5.0.4" file
2. https://docs.google.com/file/d/0Bz8Fgu4wkBnqN1lNZUpKWm1SWFk/edit?usp=sharing ..... XXXmicMAX.zip file
3. https://docs.google.com/file/d/0Bz8Fgu4wkBnqYlo3b0lpZ1ZNRUE/edit?usp=sharing ..... UPDATE-SuperSU-v1.65.zip file.
What the hell is this????
puduraja said:
Dear Friends,
After my hectic work load I was trying to concentrate on solving the Camera problems when I submitted Aroma based Rom following "bgcngm" of his " [ROM][03-08-2013] ZTE V987 (MT6589) custom ROMs (JB)".
It met with difficulties of Camera problem when was trying to fix it. In the mean time I experimented with several other Rom that has the same board features of MicroMax Canvas 4 -A210. Though many of them are booting but they had one or other problems. Then I copied the required ediiting by copying and pasting in the stock rom to make the phone booting with all its stock performance. All these days, most of them might have used to do with the stock version, I retained the stock version and build the ROM in the other way round.
The Rom is up loaded to Google Drive and the url is given.
TUTORIAL:
PLEASE BACK UP / PERFORM NANDROID BACKUP YOUR ROM BEFORE FLASING THIS ROM FOR SAFTY
Features?? Screenshotss??? Bugs??? Credits??? Please provide the details..
Some time you loose your IMEI, kindly back it up using the Mobileuncle mtk tool.
1. If you are not used for Smart Phone Flash Tool(SPFT), then you can directly flash using the flash tool facility provided in the phone. Put off your Phone. Wait for about half or one minute or till the phone vibrates. Hold simultaneously the Volume up/down button and Power button and touch the home touch key. Then the phone displays two option.
Recovery Mode - Volume up
Factory mode - Volume down
Press the volume up and 3 option will pop up and in the middle you can find the Fastboot Mode. Pressing volume down you can get into the Fastboot Mode. Now open the folder "direct cwm flash 5.5.0.4" and double click on the file "fastboot flash.bat". Now you have installed the CWM Recovery 5.5.0.4 into your phone.
2. If you are on stock version of the ROM or in custom ROM, just copy the XXXmicMAX.zip file into your external sdcard.
3. As the rom is only partially rooted it is necessary to Root the phone externally. I will upload a rooted version in couple of days. To Root the phone I have provided the UPDATE-SuperSU-v1.65.zip. Copy this file to your external Sd card.
4.By pressing volume up/down, power and touching the home key get into the CWM recovery mode.
I. Choose install zip from sd card and then choose zip from sd card. Select the zip file XXXmicMAX.zip file you have just coped and install it. Wait for about a minute or two.
2. After the Update is completed again you go to the file UPDATE-SuperSU-v1.65.zip and install.
3. After installation of these two file you reboot your phone.
The phone will boot with screen showing Android is updating.
Enjoy.
url: 1. https://drive.google.com/folderview?id=0Bz8Fgu4wkBnqMTNndkRjRFBGSzg&usp=sharing .... "direct cwm flash 5.5.0.4" file
2. https://docs.google.com/file/d/0Bz8Fgu4wkBnqN1lNZUpKWm1SWFk/edit?usp=sharing ..... XXXmicMAX.zip file
3. https://docs.google.com/file/d/0Bz8Fgu4wkBnqYlo3b0lpZ1ZNRUE/edit?usp=sharing ..... UPDATE-SuperSU-v1.65.zip file.
Click to expand...
Click to collapse
Please provide the details...
WHAT KIND OF DETAILS You need
NeroD said:
Please provide the details...
Click to expand...
Click to collapse
Dear brother,
You install it and see the functioning. Even I have installed the Xposed Installer in my personal phone. Install and enjoy.
I already informed. I copied many required files into the stock files to make it working with the trial and error procedure. Just put some files into the bin, some files into the lib, some files into the vender some file into Xbin and experimented. It is simple copy and past that suits to the system of the phone to get the boot and stock performance. We can not say the the stock performance is all that bad. You can install camera FV-5 also which i have in my personal phone.
Just give me some ideas to improve. I have not beatified my presentation which is not important.
Please suggest some improvements to increase the performance. The battary drain has stopped to about 30% in my phone. But it depends on individual usage. I am only a learner in this game and as a hobby I pass my time peacefully.
Thanks.
.
Screeb Shots, direct root and recovery tools
puduraja said:
Dear brother,
You install it and see the functioning. Even I have installed the Xposed Installer in my personal phone. Install and enjoy.
I already informed. I copied many required files into the stock files to make it working with the trial and error procedure. Just put some files into the bin, some files into the lib, some files into the vender some file into Xbin and experimented. It is simple copy and past that suits to the system of the phone to get the boot and stock performance. We can not say the the stock performance is all that bad. You can install camera FV-5 also which i have in my personal phone.
Just give me some ideas to improve. I have not beatified my presentation which is not important.
Please suggest some improvements to increase the performance. The battary drain has stopped to about 30% in my phone. But it depends on individual usage. I am only a learner in this game and as a hobby I pass my time peacefully.
Thanks.
.
Click to expand...
Click to collapse
NeroD said:
Please provide the details...
Click to expand...
Click to collapse
Some of the screens shots are presented below:
If you feel difficulties in rooting the phone the you can use the file provided below:
Procidure:
1. Go to system settings
2. On the display, open -"About Phone"
3. On the display touch 7 times the "Build number" till you get a pop up of you are a developer
4. Then go return back to settings.
5. Open the developer option Tick "Stay awake, USB debugging" and untick Verify apps"
6. Now open up the 7z.zip folder " Micromax Rooter", and take the rooter folder you find inside to your desk top, open and double click the run.bat. Your phone auto boot wit the display of Android is updating.
If you want to enter the CWM recovery without using the buttons from your phone the open the zip file below: And double click the adb Recovery.bat.
With best wishes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 2267639
View attachment 2267640
Has any one ported this. If any problems encountered.
Please report.
I will be posting a fully rooted more customised version.
If you submit your feed back it help me to give you a more User friendly ROM immediately.
Sent from my A210 using xda app-developers app
Hi Bro,
Please come and join www.amaarforum.com, a forum that I have started recently for the mobile freaks. Invite others also.
Thanks
:good:
sganguly said:
Hi Bro,
Please come and join www.amaarforum.com, a forum that I have started recently for the mobile freaks. Invite others also.
Thanks
Click to expand...
Click to collapse
Thanks I have joined the farum today.
I'm a newbie with this.. I got my Nexus 5x a few weeks ago. With the instruction of someone else i unlocked the boot loader and rooted my phone. then i had an issue with boot looping after some customization on my phone. so i attempted to wipe all that stuff off my phone is TWRP and i accidentally checked system. Now what do i do? Now i don't really know what a rom is or adb side loader or something like that.. i need some simple and clear instructions to get my phone working again. preferably without having to root all over again (that was exhausting and quite difficult, lots of trial and error).. but if it won't be rooted anymore, it's better than nothing. Please help!!
starlitserenity said:
I'm a newbie with this.. I got my Nexus 5x a few weeks ago. With the instruction of someone else i unlocked the boot loader and rooted my phone. then i had an issue with boot looping after some customization on my phone. so i attempted to wipe all that stuff off my phone is TWRP and i accidentally checked system. Now what do i do? Now i don't really know what a rom is or adb side loader or something like that.. i need some simple and clear instructions to get my phone working again. preferably without having to root all over again (that was exhausting and quite difficult, lots of trial and error).. but if it won't be rooted anymore, it's better than nothing. Please help!!
Click to expand...
Click to collapse
just copy some rom , twrp can access mtp
Apayah said:
just copy some rom , twrp can access mtp
Click to expand...
Click to collapse
again , i dont know what a rom is or where to find one and i have no idea what mtp is.
starlitserenity said:
again , i dont know what a rom is or where to find one and i have no idea what mtp is.
Click to expand...
Click to collapse
when you in twrp , just plug it into your pc
starlitserenity said:
I'm a newbie with this.. I got my Nexus 5x a few weeks ago. With the instruction of someone else i unlocked the boot loader and rooted my phone. then i had an issue with boot looping after some customization on my phone. so i attempted to wipe all that stuff off my phone is TWRP and i accidentally checked system. Now what do i do? Now i don't really know what a rom is or adb side loader or something like that.. i need some simple and clear instructions to get my phone working again. preferably without having to root all over again (that was exhausting and quite difficult, lots of trial and error).. but if it won't be rooted anymore, it's better than nothing. Please help!!
Click to expand...
Click to collapse
Heinsbergs guide here describes how to return to stock
http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
Scroll down to "10. How To Flash The Factory Images (And Return To Stock)"
Darke5tShad0w said:
Heinsbergs guide here describes how to return to stock
http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
Scroll down to "10. How To Flash The Factory Images (And Return To Stock)"
Click to expand...
Click to collapse
again, i cant do that . my OS is completely wiped. i went to #10 - the instructions cant be followed, i cant get onto my phone except into twrp.
Apayah said:
when you in twrp , just plug it into your pc
Click to expand...
Click to collapse
when i connect my phone to my computer and am in twrp, then what?
starlitserenity said:
again, i cant do that . my OS is completely wiped. i went to #10 - the instructions cant be followed, i cant get onto my phone except into twrp.
Click to expand...
Click to collapse
You only removed system you should still be able to get into bootloader.
Turn phone off, hold the volume down button then power button.
Should go to a screen with a android man laying down and it saying fastboot mode in red.
Darke5tShad0w said:
You only removed system you should still be able to get into bootloader.
Turn phone off, hold the volume down button then power button.
Should go to a screen with a android man laying down and it saying fastboot mode in red.
Click to expand...
Click to collapse
then what? the instructions are too complicated for me :S and i dont understand most of the terms
starlitserenity said:
then what? the instructions are too complicated for me :S and i dont understand most of the terms
Click to expand...
Click to collapse
You are now in fastboot mode and bootloader is still unlocked?
Download and install this http://www.wugfresh.com/nrt/
Wait for it to load the try auto detect on the window that pops up, if that doesn't work select "nexus 5x" and then on the next one choose the one ending with "mhc19q" click next/continue.
then on the next window click download and update all dependances.
What for it to do its thing then on the next window click on "flash stock + unroot", click ok,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then ok. It will download the latest factory image and do its thing. What happens after this you will need to describe to me as I have not used this toolkit.
@starlitserenity, I can help you get an OS back onto your phone. It's very simple even though you may be a NOOB. It's OK. As long as you have access to a PC and Internet you are OK because you can still access TWRP. Here is a list of steps:
1) go to forum.xda-developers.com/nexus-5x/development
2) scroll down to the ROM labeled
"Pure Nexus"
3)In the first post (Original Post), scroll down and click on "Downloads & Changelog" You will be redirected to AFH (Android File Host) to download the ROM/OS
4)Scroll down just a little and you will see a Green Box with files/ROMs. Click on the newest one labeled
pure_Nexus_bullhead-6.0.1-20160407.
After you click on the ROM file, a new screen will appear with a Green Box that says "Begin Download".
5) Click on " Begin Download"
Once you click the "Begin Download" box, you will see below another Green Box that says "primary download". Click on the " Primary Download " box to begin downloading your new ROM/OS.
6) Go back to the Pure Nexus original post/first post and click on the link labeled "Highly Suggested Gapps"
You will be redirected to Android File Host again to download your Gapps(GoogleApps). Scroll down just a little to the Green Box again and select
PureNexus_Dynamic_Gapps_6.x.x_4-7-16.zip and click on the link.
7) A new screen will appear with a Green Box that says "Begin Download"
Click on the "Begin Download" box and just below another Green Box will appear that says "primary download".
Click on the " primary download " and this will download you Gapps.
8) Once both of your files have finished downloading onto your PC, boot your 5x into TWRP and connect it to your PC and let the drivers install so your Nexus is recognized by your PC.
9) Now that your 5x is recognized by your PC while booted into TWRP, you will need to move the 2 downloaded files from your PC's download folder to the internal storage of your 5x.
10) Now that you have moved both downloaded files to your Nexus 5x internal storage you will need to reboot your recovery. Select the home button in TWRP, select reboot, then select reboot recovery to reboot TWRP. This will all TWRP to recognize the two new files that were moved to your Nexus internal storage.
11) Unplug your Nexus from your PC. On your device, go to the TWRP home screen and select wipe, then swipe to factory reset. Now you are ready to install your new ROM and Gapps
12) Now that you have wiped the 5z again, select the TWRP home button. Next, select "Install". Navigate to your SD card/internal storage to locate the two files we moved to your Nexus from your PC. Select the file that says
pure_nexus_bullhead-6.0.1-20160407
Once selected you will be directed to a new TWRP screen and you will see a box to click on that says " Add More Zips" Click this box and navigate to the SD card/internal storage and select the 2nd file that says PureNexus_Dynamic_GApps_6.x.x_4-7-16.zip. Once you have selected the file you will be directed to another TWRP screen with a swipe button to install the ROM file and the Gapps file. Swipe the button to begin the installation.
13) Once the installation is complete, you will see a box that says wipe cache/dalvik. Select this box, wipe cache/dalvik, then select reboot system.
14) Once your device boots you will proceed to the setup wizard just like when your Nexus 5x was new out of the box. Go through the setup wizard to setup your device and once completed, reboot, and you will be back to normal with a pretty sweet custom ROM called Pure Nexus.
Sent from my Nexus 6 using XDA-Developers mobile app
-__-
Use power+volume button. You will get thishttp://www.androidcentral.com/sites/androidcentral.com/files/styles/large_wm_brw/public/article_images/2014/11/nexus-manual-update-01.jpg?itok=wEfVvztj.
Then flash nexus factory images. and go stock. You can skip flashing recovery or you can flash recovery again. You will lose root access. you have to flash supersu again
Update? We're you able to install a new ROM and get your 5x back up and running?
Sent from my Nexus 6 using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is an updated version of TWRP for Mi Pad 3 (Codename: Cappu). This is the latest update based on TWRP v3.2.1-0 I used TWRP by Multirom and rakomancha's TWRP as base for a working device / twrp tree for our device. I have tested this version for some hours and discovered no errors - but tell me if you find some. If you are looking for a tree for your Mediatek MT8173 / MT8176 device you can use my one as base. You should also have a look at the twrp main-thread for all neccessary changes that need to be made.
DISCLAIMER
This image has only been successfully tested by me at this point.
Please exercise caution and care when attempting to flash anything to your device.
You are completely responsible for any possible issues or damages resultant from undertaking the following procedures.
That being said, this image and method should be safe.
Installation:
Method 1:
1. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
2. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
3. Turn your Tablet off.
4. Extract SP_Driver_V1524.zip on your Windows PC with (7zip) and install drivers.
5. Extract SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip on your Windows PC with (7zip).
6. Download twrp-3.2.3-0-cappu-20180906.img and MT8173_Android_scatter.txt.
7. Open the folder SP_Flash_Tool_v5.1620_WinSP_Flash_Tool_exe_Windows_v5.1720.00.000 and run flash_tool.exe.
8. In SP Flash Tool open the file scatter (MT8173_Android_scatter.txt) with the yellow button on the right (Scatter-loading).
9. Uncheck all boxes, except "Recovery"
10. Press the green (DOWNLOAD) Button. After that plug your usb cable into Mi Pad 3 and wait until SP Flash Tool says FINISH!
11. TRWP was flashed successfully and is now ready to use. Turn the tablet off. Hold Volume(+) and Power Button until you see TWRP Menu.
Method 2:
1. Install Minimal ADB and Fastboot -> https://forum.xda-developers.com/showthread.php?t=2317790
2. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
3. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
4. Turn the tablet off. Hold Volume(-) and Power Button until you see Mi Bunny / Fastboot.
5. Plug your usb cable into your Mi Pad 3.
6. Open cmd window in Windows and browse to Minimal ADB and Fastboot folder.
7. Download twrp-3.2.3-0-cappu-20180906.img and copy to Minimal ADB and Fastboot folder.
8. Type in cmd window: fastboot flash recovery twrp-3.2.3-0-cappu-20180906.img. If successful, reboot and hold Volume(+) and Power Button until you see TWRP.
To get Root access, flash this Latest version of Magisk. You can find the downloads and a guide here.
Downloads:
twrp-3.2.3-0-cappu-20180306.img 2018-09-06 Update: TWRP 3.2.3-0
MT8173_Android_Scatter.txt
SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip
SP_Flash_Tool_v5.1620_Linux_64bit.zip
SP_Driver_V1524.zip
TWRP Tree on Github: https://github.com/Goayandi/android_twrp_xiaomi_cappu
I can't touch display with this TWRP. How can I fix it?
Genie's said:
I can't touch display with this TWRP. How can I fix it?
Click to expand...
Click to collapse
What ROM did you flash TWRP over?
Before flashing TWRP (via Method 2), I first flashed the China Stable ROM V9.2.2.0 found at en.miui.com. Touchscreen worked perfect for me
Genie's said:
I can't touch display with this TWRP. How can I fix it?
Click to expand...
Click to collapse
As alfiean already said you should try to flash China Stable or Developer ROM before you flash TWRP. When I flashed an older version of TWRP on my new Mi Pad 3 I mentioned touch problems, too. After flashing China Dev Rom everything worked fine.
OK, I fixed the touch issue.
By the way, this recovery seems MTP not working.
Genie's said:
OK, I fixed the touch issue.
By the way, this recovery seems MTP not working.
Click to expand...
Click to collapse
Oh, really? Seems like i forgot the flags for MTP. I'll include it in an updated version
Update: twrp-3.2.1-0-cappu-20180306.img - Fixed MTP and added some minor improvements.
Goayandi said:
Oh, really? Seems like i forgot the flags for MTP. I'll include it in an updated version
Update: twrp-3.2.1-0-cappu-20180306.img - Fixed MTP and added some minor improvements.
Click to expand...
Click to collapse
Found a bug:
Unable to flash SuperSU-v2.82-201705271822.zip with the following error:
Code:
- Finding boot image
--- Boot image: not found, aborting
Same for other SU versions.
But with twrp-3.1.0-cappu_b4.img (by multirom.me) I've flashed same SU package successfully without any errors.
Is encryption working?
This isn't working on LATEST MIUI 10 FOR Mi Pad 3. It shows 0 MB. Please help me. It was working. Then i flashed miui 10 and twrp for several times. it isnt working. @Goayandi
latest miui 10 for mi pad 3: http://en.miui.com/thread-3939343-1-1.html
Someone can upload new versions os this recovery
Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend
Goayandi said:
Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend
Click to expand...
Click to collapse
Thx mate.
Goayandi said:
Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend
Click to expand...
Click to collapse
Have you time for take a look ¿?
Hoihoi, some news around ¿?
Nothing ¿?
Method 1:
1. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
2. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
3. Turn your Tablet off.
4. Extract SP_Driver_V1524.zip on your Windows PC with (7zip) and install drivers.
5. Extract SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip on your Windows PC with (7zip).
6. Download twrp-3.2.3-0-cappu-20180906.img and MT8173_Android_scatter.txt.
7. Open the folder SP_Flash_Tool_v5.1620_WinSP_Flash_Tool_exe_Windows_v5.1720.00.000 and run flash_tool.exe.
8. In SP Flash Tool open the file scatter (MT8173_Android_scatter.txt) with the yellow button on the right (Scatter-loading).
9. Uncheck all boxes, except "Recovery"
10. Press the green (DOWNLOAD) Button. After that plug your usb cable into Mi Pad 3 and wait until SP Flash Tool says FINISH!
11. TRWP was flashed successfully and is now ready to use. Turn the tablet off. Hold Volume(+) and Power Button until you see TWRP Menu.
Click to expand...
Click to collapse
At point number 8 of method one I detect this error: the "recovery" box cannot select it. The program does not allow me to select the box recovery.
My OS is Windows 7 Ultimate 64bit
Cannot swipe in TWRP recovery mode
Hi,
I have an issue with this image
twrp-3.2.1-0-cappu-20180306.img
androidfilehost fid=746010030569959472 ( I cannot post the link because I'm a new user)
I go in recovery mode but I'm not able to interact with the screen: a big white lock icon appears in the center and I'm not able to remove it, any idea?
I've also seen that there is an updated version here but there are NO mirrors available!!!
twrp-3.2.3-0-cappu-20180906.img
androidfilehost fid=1322778262903999335 ( I cannot post the link because I'm a new user)
Please, can you help me with this?
1) How can I unlock the screen ?
OR
2) Do you have a functioning link for the updated version?
Thanks!
I installed, teamwin. in my mipad 4 but is written in russian. isn´t it? It is complicate to use it in Russian.
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 SM-A515F Android 11 – Build number DUB1 – Android security patch level: February 1, 2021. The TWRP version is 3.5.0 developed and brought to you by [email protected] senior developer and figured by Hendra Manudinata. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download Twrp+vbmeta_A11.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 DUB1 firmware Android 11 :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing Twrp+vbmeta_A11.tar as AP in ODIN, then click start.
TWRP is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Wipe -> Format data, type ‘yes’ and confirm
Select Install – Magisk Magisk-v21.2.zip or latest, Swipe to confirm Flash (Rooting)
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
Watch this video:
Credit:
1. @ianmacd
2. @hendramanu
3. @redymedan
I can't do step 6 because the phone boots in to Download mode before it can get in to recovery.
load_kernel: Could not do Normal boot. (DR LOAD_Fail)
vbmeta: Error verifying vbmeta image: OD_NOT_SIGNED (3)
irajawi-fadif said:
I can't do step 6 because the phone boots in to Download mode before it can get in to recovery.
load_kernel: Could not do Normal boot. (DR LOAD_Fail)
vbmeta: Error verifying vbmeta image: OD_NOT_SIGNED (3)
Click to expand...
Click to collapse
DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
For more info please See the video.
Mohd Masab said:
DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
For more info please See the video.
Click to expand...
Click to collapse
I did that but it still boots in download mode and the cable is connected
Great work, Thanks! But after flashing A11+ TWRP and it's working, but i cannot access files of phone from recovery. I see all files Name mingled and encrypted, both from pc (when phone at TWRP recovery) and from TWRP itself. I'll upload pics. Can you help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And i see also i cannot backup:
Do you have good working TWRP for A51 for A11 ?
Thanks very much for your work!
tzahik1 said:
Great work, Thanks! But after flashing A11+ TWRP and it's working, but i cannot access files of phone from recovery. I see all files Name mingled and encrypted, both from pc (when phone at TWRP recovery) and from TWRP itself. I'll upload pics. Can you help?
And i see also i cannot backup:
Do you have good working TWRP for A51 for A11 ?
Thanks very much for your work!
Click to expand...
Click to collapse
I think you need this https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
irajawi-fadif said:
I think you need this https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
Click to expand...
Click to collapse
Thanks! I already installed Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip as in the instructions.
But maybe i didn't do it right.
I'll try again.
Don't know what is the order exactly. the zip last or first.
See there are same problems in Android 10:
TWRP for Android 10
Mohd Masab said:
DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
For more info please See the video.
Click to expand...
Click to collapse
@irajawi-fadif @Mohd Masab
I tried again and again, and nada. After booting at the end to recovery i see all files encrypt. installed at the last AGAIN Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip and files are encypt when booting from twrp recovery.
And i cannot Backup because all files are gibberish!
Can you check also on yours what happening after you show in the video to enter to TWRP recovery - can you see files on internal phone and can you do Backup. Please.
If i cannot backup from recovery what is the point of TWRP?
Thanks.
Can Anyone backup from recovery after all this?
Please check and tell. Thx.
Bingo!
@Mohd Masab @irajawi-fadif
You have an error in the steps and in the video:
YOU NEED TO REPEAT STEP 7 AGAIN AFTER STEP 9 (!!!)
You need to flash Disable_verity twice! before and right after all zips!
so after flashing Magisk (step 9) Repeat step 7.
Without that YOU CANNOT ACCESS phone data from recovery (only from system boot)
And YOU CANNOT BACKUP from recovery (data is encrypted)
You can see this method also in this guide:
TWRP on galaxy M51
Please fix it also in the video!
Thank you.
tzahik1.
tzahik1 said:
Great work, Thanks! But after flashing A11+ TWRP and it's working, but i cannot access files of phone from recovery. I see all files Name mingled and encrypted, both from pc (when phone at TWRP recovery) and from TWRP itself. I'll upload pics. Can you help?
And i see also i cannot backup:
Do you have good working TWRP for A51 for A11 ?
Thanks very much for your work!
Click to expand...
Click to collapse
Watch this video how to fix it
This is not my thread I can not edit it Enjoy!
redymedan said:
Watch this video how to fix it
This is not my thread I can not edit it Enjoy!
Click to expand...
Click to collapse
Thank you.
If you can, please check why sideload on TWRP recovery (Advanced--->ADB Sideload)
is not working
(I know this twrp was intended for Android 10 but still...)
If it worked, you don't need external SD card to flash all the zips...
Thanks
tzahik1 said:
Thank you.
If you can, please check why sideload on TWRP recovery (Advanced--->ADB Sideload)
is not working
(I know this twrp was intended for Android 10 but still...)
If it worked, you don't need external SD card to flash all the zips...
Thanks
Click to expand...
Click to collapse
This TWRP is not for Android 10, this is developed for Android 11. You can not use ADB on Samsung Galaxy device in TWRP. need or not SD Card it depends on what you want to do.
redymedan said:
This TWRP is not for Android 10, this is developed for Android 11. You can not use ADB on Samsung Galaxy device in TWRP. need or not SD Card it depends on what you want to do.
Click to expand...
Click to collapse
I saw TWRP 3.5.0 was for A10.
You are wrong. I use a lot my S9+ TWRP recovery with ADB Sideload to flash zips on my pc to device.
This however is not working. when you press ADB sideload (as i said above in the menu) USB connection to pc is disconnecting. When you press cancel and return to TWRP menu , connection to pc is back and you can see from "adb devices" the device at recovery state.
If you can fix it , it will be great because we won't need External SD card to flash zips, we can do it from pc.
Thanks.
irajawi-fadif said:
I did that but it still boots in download mode and the cable is connected
Click to expand...
Click to collapse
I have the exact same problem, where you able to solve it?
when i try to flash in odin i get (only official released binaries are allowed...)
SperguzeX said:
I have the exact same problem, where you able to solve it?
Click to expand...
Click to collapse
nope..
hello
Does this twrp will also work in the SM-A516U model?
Thanks
DroidJP said:
hello
Does this twrp will also work in the SM-A516U model?
Thanks
Click to expand...
Click to collapse
No
Do I have to use ODIN v3.13.1 or do I use the newer versions now?
Hi peeps, my Xiaomi K40 now became a brick because it can't be installed any ROM, I've tried using TWRP and also mi flash tool but nothing helps.
When using TWRP I've tried two methods:
1/ adb sideload
2/ Install from a zip file which is pushed to device using adb push command(because now the device doesn't have any OS)
But in both cases it shown:
Failed to mount '/system_root' (Block device required)
Failed to mount '/system_ext' (Block device required)
Failed to mount '/product' (Block device required)
Failed to mount '/vendor' (Block device required)
Failed to mount '/odm' (Block device required)
Click to expand...
Click to collapse
I've also tried to wipe all data using Advance Wipe option to repair the partition but no hope.
Any one has solution for this case? thanks in advance!
Flash your device in EDL mode.
Please refer to the post below on how to bypass edl mode authentication.
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE!
Thanks to VD171 for his post.
I think your device is having a Snapdragon Chipset. Sorry but you may try to search on google for contact to person who has authorised edl account to flash a Snapdragon based phone.
Learn more about it in this video
reborn2020 said:
Hi peeps, my Xiaomi K40 now became a brick because it can't be installed any ROM, I've tried using TWRP and also mi flash tool but nothing helps.
When using TWRP I've tried two methods:
1/ adb sideload
2/ Install from a zip file which is pushed to device using adb push command(because now the device doesn't have any OS)
But in both cases it shown:
I've also tried to wipe all data using Advance Wipe option to repair the partition but no hope.
Any one has solution for this case? thanks in advance!
Click to expand...
Click to collapse
do you still have your fastboot mode on your phone?
mvikrant97 said:
Learn more about it in this video
Click to expand...
Click to collapse
Mi flash didn't recognized my phone.
khazzey said:
do you still have your fastboot mode on your phone?
Click to expand...
Click to collapse
Yes I do.
no bypass for STUCKDRAGON devices for EDL Mode so sad the phone became literally bricked
reborn2020 said:
Mi flash didn't recognized my phone.
Yes I do.
Click to expand...
Click to collapse
listen to me, first if you are on windows 10 you should disable driver signature enforcement on your pc search it on google after disabling you should restart your pc, next step is to install xiaomi flash tool latest (02262021) version after installing the software open it, at the right upper of the software you will see drivers click it and click install after installing, reboot your phone into fastboot mode using volume down and power button, connect your phone to pc and click refresh on xiaomi flash tool if you're phone is detected please come back here let me know
khazzey said:
listen to me, first if you are on windows 10 you should disable driver signature enforcement on your pc search it on google after disabling you should restart your pc, next step is to install xiaomi flash tool latest (02262021) version after installing the software open it, at the right upper of the software you will see drivers click it and click install after installing, reboot your phone into fastboot mode using volume down and power button, connect your phone to pc and click refresh on xiaomi flash tool if you're phone is detected please come back here let me know
Click to expand...
Click to collapse
I did this before but no hope, I don't know if the problem is I'm using a macbook and run windows 10 via bootcamp, I don't have an actual windows computer.
P.S, I upload the latest status.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
last week I was in a similar situation like yours just twrp and all partition screwed up.
well what saved me was to put dot os 5.2 on a USB c pen drive and then simply installing it from trwp (choosing USB pen as source) after literally 5-10 minutes phones came back to life.
let me know if it works for you.
also if twrp throws any error during installation just ignore them for me after flash completed phone booted just fine
ale82to said:
last week I was in a similar situation like yours just twrp and all partition screwed up.
well what saved me was to put dot os 5.2 on a USB c pen drive and then simply installing it from trwp (choosing USB pen as source) after literally 5-10 minutes phones came back to life.
let me know if it works for you.
also if twrp throws any error during installation just ignore them for me after flash completed phone booted just fine
Click to expand...
Click to collapse
I put a miui rom in a usb type c then connect into my phone, then boot into TWRP, and in Install option, I didn't see any option likes "USB pen"
reborn2020 said:
I put a miui rom in a usb type c then connect into my phone, then boot into TWRP, and in Install option, I didn't see any option likes "USB pen"
Click to expand...
Click to collapse
I said USB pen to make sure you choose it from TWRP install I think the righ name is external storage or something similar anyway it seems you are doing things the right way I am quite sure u ll bring phone back to life.
I think muiu room is just fine, should it fails try crDroid or dot os (do not try arrow or lineage)
Bruh I have a very simple solution I guess it might help you
Well first update to latest official twrp custom recovey for your device then
Navigate to Wipe
advance Wipe
Select data and choose Repair or Change File System
Press Repair File System to see if this fixes the issue. If not, continue.
Press Change File System, choose Ext2, and swipe to confirm.
now switch back to Ext4 and swipe to confirm.
i hope this might help you BTW then flash your first custom rom using a sd card or usb if succeeded then flash every stuff as usual
Anurag3100 said:
Bruh I have a very simple solution I guess it might help you
Well first update to latest official twrp custom recovey for your device then
Navigate to Wipe
advance Wipe
Select data and choose Repair or Change File System
Press Repair File System to see if this fixes the issue. If not, continue.
Press Change File System, choose Ext2, and swipe to confirm.
now switch back to Ext4 and swipe to confirm.
i hope this might help you BTW then flash your first custom rom using a sd card or usb if succeeded then flash every stuff as usual
Click to expand...
Click to collapse
Thanks, I've tried this before, unfortunately still can't solve my problem. Finally I decided to bring my phone to a technician.
Try fastboot erase userdata in cmd after taking your device to fastboot mode
Kinda check different twrp I think your twrp is having any problems plz flash your twrp once again
I hope this will surely work for you my friend.
reborn2020 said:
Thanks, I've tried this before, unfortunately still can't solve my problem. Finally I decided to bring my phone to a ttechnic
Click to expand...
Click to collapse
Bro try different formats then change to Ext4 well try this twrp https://dl.twrp.me/alioth/twrp-3.6.0_11-0-alioth.img.html umm i hope this will help you out completely.
if you still have your fastboot mode (turn off then hold power + vol. down), you should check your pc driver if adb and fastboot driver installed properly, then try flashing stock rom (dont relock your bootloader), I think what cause the brick is encrypted storage that get accessed by twrp, even if you decrypt it using password, you can still brick the phone by manually mount some partition in twrp
Thank you all of your help, peeps. Finally I solved my problem by the help of a technician. Because only technician has access to Xiaomi internal tools, these are "Hardware-Level" which could help in these cases.
He
reborn2020 said:
Thank you all of your help, peeps. Finally I solved my problem by the help of a technician. Because only technician has access to Xiaomi internal tools, these are "Hardware-Level" which could help in these cases.
Click to expand...
Click to collapse
Hello, glad you solved your issue, but can you please explain briefly how hardware was bricked since you were already able to reach fastboot & twrp? Since it's known that when you can boot to fastboot, it's a softbrick
Alipk52 said:
He
Hello, glad you solved your issue, but can you please explain briefly how hardware was bricked since you were already able to reach fastboot & twrp? Since it's known that when you can boot to fastboot, it's a softbrick
Click to expand...
Click to collapse
I can boot to fastboot but I can't do anything with fastboot becuase I wiped out anything on my phone include "firmware" maybe, I don't know, sorry but this's not my major so I can't explain.