[Q] stocked at boot logo - Huawei Ascend P6, Mate

sorry if i post in a wrong thread but i desperately need some help on how to unbrick my huawei ascend gd510-200 im stocked at boot logo after installing chainfire 3d my phone rebooted and now its not booting up. my phone is rooted using impactor i have no cwm or any recovery. please i need some help. thanks in advance.

edward091810 said:
sorry if i post in a wrong thread but i desperately need some help on how to unbrick my huawei ascend gd510-200 im stocked at boot logo after installing chainfire 3d my phone rebooted and now its not booting up. my phone is rooted using impactor i have no cwm or any recovery. please i need some help. thanks in advance.
Click to expand...
Click to collapse
Download Your official firmware from Huawei's website. Now put UPDATE.APP in sdcard through sdcard reader such as: sdcard/dload/UPDATE.APP
Now press and hold vol+ vol- and power button. Ur phone will install new firmware.

hannanzikrea said:
Download Your official firmware from Huawei's website. Now put UPDATE.APP in sdcard through sdcard reader such as: sdcard/dload/UPDATE.APP
Now press and hold vol+ vol- and power button. Ur phone will install new firmware.
Click to expand...
Click to collapse
i already did that i the update says "update failed" i even tried downloading the latest firmware on huawei site. is theres another way around to do this.? thanks for the reply anyway.

Try to drain the battery first
edward091810 said:
i already did that i the update says "update failed" i even tried downloading the latest firmware on huawei site. is theres another way around to do this.? thanks for the reply anyway.
Click to expand...
Click to collapse
Until it is totally empty. Then try recovery again.

DonCarlosis said:
Until it is totally empty. Then try recovery again.
Click to expand...
Click to collapse
thanks a lot for your help. i manage to unbrick my phone..

how did u unbrick ur phone plz i also have the same problem.
edward091810 said:
thanks a lot for your help. i manage to unbrick my phone..
Click to expand...
Click to collapse
HI im new to this huawei phone and i accidently bricked my HAM and am having the same problem as u culd u plz tell me how u solved the problem and unbricked it.

Related

Downgrading

Sorry guys, I'm new to Android and all of this and i'm in a foreign country so i don't know what to do.
I have a B506 with KitKat, but i want to downgrade to B125, can anyone help me?
I know this question has probably been asked before, but i couldn't find it and i really don't know how to do this, so sorry for being a noob.
AriaE132 said:
Sorry guys, I'm new to Android and all of this and i'm in a foreign country so i don't know what to do.
I have a B506 with KitKat, but i want to downgrade to B125, can anyone help me?
I know this question has probably been asked before, but i couldn't find it and i really don't know how to do this, so sorry for being a noob.
Click to expand...
Click to collapse
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
BeyondTheHorizon said:
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
Click to expand...
Click to collapse
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
BeyondTheHorizon said:
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
Click to expand...
Click to collapse
alex.79 is right, you can't downgrade directly from B506. That middle step is needed. So the nonsense advice is yours.
primo said:
alex.79 is right, you can't downgrade directly from B506. That middle step is needed. So the nonsense advice is yours.
Click to expand...
Click to collapse
Trust me. I'm right, you're wrong.
BeyondTheHorizon said:
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
Click to expand...
Click to collapse
My frend don't give advice on things you are not quite clear for you. In this case nonsense advice is yours.
alex.79 said:
My frend don't give advice on things you are not quite clear for you. In this case nonsense advice is yours.
Click to expand...
Click to collapse
No such step needed, you just try to make downloads with that link.
Tested without that step and all went well.
I've downgraded twice but never used that file. What is true (if i remember well) every time, at the firs boot, phone got stuck at logo. Installed the same firmware again and worked. At the second install, i think the script saw that something was not in place and did a factory reset. Maybe a factory reset should be done before downgrading.
BeyondTheHorizon said:
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
Click to expand...
Click to collapse
Actually, this method works. I did not need the middle step. Just put the download update.app in the sdCard root AND in the dload folder, and then do a stock recovery boot.
In fact, I used the systems local update and got B125 no problem at all.
Sent from my HUAWEI P7-L10 using XDA Premium HD app
which stock recovery is needed to do a downgrade from kk to jb?
i'm a little confused what stock recovery to take..
there are many possible stock recoverys out there..
Sent from my P6-U06 using XDA Free mobile app
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
this is the right way to do
big probelms in a downgrade
i had b507 by recicla .. to b125 and then the prolems started ... my cable disconnects original charger didn't work and the data cable gave me error 43 on compute after sercing for a solutioun returned to official kit kat and a miricle happend everything works can't return to jelly bin without those bugs to reapear .. what might be the problem .. i've wrote eaven the boot and nothing same thing .. so can't go to non of the roms from jelly bean tried b111,b125,b132 and all gave me the same thing .. now i'll stay at b511 till i find a soultion
error details .. on charger disconect after a sec or two , the other chargers work (old huawei one from a sonic a motorola charger and a non-branded one)
on calble one computer disconnects after 3 sec second atemt gabe me error 43
next computer error 43 from start
on b511 everything works
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
@Alex
can u post here a new link i need this file to flash to my phone as well to update!
WBR
ReyTech.
Hello guys i need the recovery img too... can someone please provide i link with it please... !!
Using this http://forum.xda-developers.com/showthread.php?t=2433454 tool can get you any needed .img files from wanted firmware, supposing you have the actual file (update.app) from the firmware.
Sent from my SM-G850F

p6 wrong downgrade stuck in android logo

hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
asphalt30000 said:
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
Click to expand...
Click to collapse
Someone help me plZzzzzzzZz
asphalt30000 said:
Someone help me plZzzzzzzZz
Click to expand...
Click to collapse
Install B510
FutureIntelligence said:
Install B510
Click to expand...
Click to collapse
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
asphalt30000 said:
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
Click to expand...
Click to collapse
is there anybody can help me?
asphalt30000 said:
is there anybody can help me?
Click to expand...
Click to collapse
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
iwtfmcl said:
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
Click to expand...
Click to collapse
tnx my frnd but i already did this way.but it didnt work
I need someone to help . PlzZzZZZZ
asphalt30000 said:
I need someone to help . PlzZzZZZZ
Click to expand...
Click to collapse
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
I have sucsh problem too... But no sucsess till now
I did all above you said
miz_pimp said:
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
Click to expand...
Click to collapse
Ya bro i did it. thousand time
asphalt30000 said:
Ya bro i did it. thousand time
Click to expand...
Click to collapse
Then flash the device again using the 3-button method immediately after?
miz_pimp said:
Then flash the device again using the 3-button method immediately after?
Click to expand...
Click to collapse
I know what u mean bro but whenever i want to flash any roms i did it this way
asphalt30000 said:
I know what u mean bro but whenever i want to flash any roms i did it this way
Click to expand...
Click to collapse
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
miz_pimp said:
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
Click to expand...
Click to collapse
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
asphalt30000 said:
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
Click to expand...
Click to collapse
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
miz_pimp said:
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
Click to expand...
Click to collapse
Oh sryyyy???my sis
Yeah no one can help me??. I have been searching all of the internet but nothing helps me
I instaled twrp & 3 custom rom but they are like chinnies rom unfortunately.
Again tnx my siiiis
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
sko4a said:
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
Click to expand...
Click to collapse
Tnx alot my frnd . I will do this and i will say the result. I hope sooooo
no its not working for me . still stucking in android logo :crying::crying::crying::crying::crying:

Not going to fast boot or anything..

Guys pl help me out here.. My phone is fully dead .. It is not going to fast boot any more.. I was running PAC man ron.. I unknowingly flashed Multirom manager.zip for nexus 5.. My phone is not booting and its fully dead.. ppl pls healp me I am totally upset .. I cant do anything...
Flash stock rom, device will boot..
If you don't know how to flash stock rom,
search for root threads in general section of this device
Once ur device boot.. U can do whatever u want to do..
U will need
flashtool
Stock rom
Laptop or pc for using flash tool
And Data cable
There are tutor how to flash stock rom in general section
Check root thread's for that..
U need to connect device in flash mode for that
I'm from mobile so cannot help much..
Sent from my D5322 using XDA app
rrd84 said:
Flash stock rom, device will boot..
If you don't know how to flash stock rom,
search for root threads in general section of this device
Once ur device boot.. U can do whatever u want to do..
U will need
flashtool
Stock rom
Laptop or pc for using flash tool
And Data cable
There are tutor how to flash stock rom in general section
Check root thread's for that..
U need to connect device in flash mode for that
I'm from mobile so cannot help much..
Sent from my D5322 using XDA app
Click to expand...
Click to collapse
Bro, I know to flash roms and all that things...I have many experience in flashing roms.. Now MY problem is I CANNOT go to either fastboot or flash mode.... I dont konw why my phone is not even gng to fastboot ... If I click the power button there is vibrations. The battery was at 75%.
ok..
hold *volume up+power button till 3 vibrations.
then tried fastboot or flashtool mode
rrd84 said:
ok..
hold *volume up+power button till 3 vibrations.
then tried fastboot or flashtool mode
Click to expand...
Click to collapse
Yeah also did that but no vibrations is coming..
then
Rahul1608 said:
Yeah also did that but no vibrations is coming..
Click to expand...
Click to collapse
then.. something really bad happen i think..
try sony pc companion, sometimes it works.. when nothing else does..
else.. service center
rrd84 said:
then
then.. something really bad happen i think..
try sony pc companion, sometimes it works.. when nothing else does..
else.. service center
Click to expand...
Click to collapse
NO bro not connecting.. I think the only way is service center... Anyway thanks for your response
Rahul1608 said:
NO bro not connecting.. I think the only way is service center... Anyway thanks for your response
Click to expand...
Click to collapse
Try pressing the reset button located on the sim tray. I hope that will be helpful
Try this - download the latest flash too and either 4.4 or 5.0 ftf. slect the appropriate ftf and once it is ready to flash, ie., when it prompts you to connect your phone, connect the phone to the laptop with vol - pressed. It should detect the phone. This method would wipe out the entire internal of the phone and do a clean install. Unlikely this should not work.
kan_ranga said:
Try this - download the latest flash too and either 4.4 or 5.0 ftf. slect the appropriate ftf and once it is ready to flash, ie., when it prompts you to connect your phone, connect the phone to the laptop with vol - pressed. It should detect the phone. This method would wipe out the entire internal of the phone and do a clean install. Unlikely this should not work.
Click to expand...
Click to collapse
Pls understand my major prob is I am not able to go to flash mode or even fastboot.
i can understand not able to get into fastboot mode (probably your bootloader is messed), but how did you figure out your device not getting into flash mode. You have not mentioned about how it behaved with flashtool. What does it say when you connect it to the laptopn with only vol- pressed?
Connect ur charger and say wat happens?
i have same issue please help me guys
:crying::crying:i have same issue please help me guys :crying::crying:
please help me :crying::crying:
Bhg73 said:
:crying::crying:i have same issue please help me guys :crying::crying:
please help me :crying::crying:
Click to expand...
Click to collapse
Please provide more details on what is the behavior of your device and what have you done so far
The fastboot is working and i have downloaded indian version of latest D5322_Customized IN_1280-6721_19.3.A.0.472_R4C and make ftf file and tried to flash but its says You must have the according fsc script to flash this device.
also strange thing found i had flashed dual recovery and both recovery working properly (i am stucked in bootloop because i had flashed supersu.zip provided by chainfire)
any help appreciate thanks in advanced
Bhg73 said:
The fastboot is working and i have downloaded indian version of latest D5322_Customized IN_1280-6721_19.3.A.0.472_R4C and make ftf file and tried to flash but its says You must have the according fsc script to flash this device.
also strange thing found i had flashed dual recovery and both recovery working properly (i am stucked in bootloop because i had flashed supersu.zip provided by chainfire)
any help appreciate thanks in advanced
Click to expand...
Click to collapse
1.This is not Q&A troubleshooting forum so please ask in that forum frm next onwards
2.
What's ur phone model?
Which flashtool?
Whats the flashtool version?
Do u installed the flash tool drivers properly?
Could yu also plz provide some snaps
Phone model: T2 ultra dual(D5322)
flashtool : flashtool by androxyde
flashtool version 0.9.19.0
yes i have installed flashtool drivers properly
pvnsai73 said:
Connect ur charger and say wat happens?
Click to expand...
Click to collapse
For few minutes it glows red and after that it goes off and for few hours the phone feels warm and after that it become cool.. No green led ..:crying:
pvnsai73 said:
Connect ur charger and say wat happens?
Click to expand...
Click to collapse
If i connect it to computer by pressing vol- , it says usb cannot be recogonising
Recovered
finally i managed to recover my phone
i have downloaded old flashtool 0.9.18.6
And flash was successful

Soft-bricked RIO-L03? Here's the stock firmware update you can apply.

http://huawei.com/usmobile/consumer/support/downloads/index.htm
Just choose the one for the RIO-L03 of course, and apply it like you would a stock update. Took a while for me to find this after I soft-bricked my GX8. Thought some people may find this helpful.
Thanks
Thanks, im on cm13 how can i do this RIO L01 i have
Tomelleri said:
http://huawei.com/usmobile/consumer/support/downloads/index.htm
Just choose the one for the RIO-L03 of course, and apply it like you would a stock update. Took a while for me to find this after I soft-bricked my GX8. Thought some people may find this helpful.
Click to expand...
Click to collapse
Any chance to get a TWRP flashable image of this ROM? Thanks in advance.
how repair my huawei no system, i need program to instal rom?
orion1717 said:
how repair my huawei no system, i need program to instal rom?
Click to expand...
Click to collapse
Custom recovery (TWRP) or stock recovery install ROM.... you do not need a program to install rom.
Thanks
instructions
Just used this stock firmware to recover my RIO-L03 from softbrick.
you just need to extract dload directory from the ZIP file and then copy the dload directory to the root of a microSD card after that put MicroSD on the phone and press VolUp + VolDown and Power button until the phone vibrates, let go the power button and the Vol Buttons and the phone will begin to flash the FW, from 0% to 100% it will run a FW verification and do a reboot.
then the phone will reboot like 2 times and begin the normal process as new device.
I just want to help any user with the same problem to do it right.
cheers to tomelleri for finding this firmware, you saved my RIO-L03!
It looks like maybe they removed it?
I'm getting 404. When I look through support for the gx8 on huawei.com, it has the kernel but not the ROM.
I still have the file on my computer or phone, if you still need it just tell me and I will gladly post a link for the file to download.
rickylambert said:
Any chance to get a TWRP flashable image of this ROM? Thanks in advance.
Click to expand...
Click to collapse
You can use this tool to create a flasheable zip from UPDATE.APP file:
http://forum.xda-developers.com/showthread.php?t=2433454
Tomelleri said:
http://huawei.com/usmobile/consumer/support/downloads/index.htm
Just choose the one for the RIO-L03 of course, and apply it like you would a stock update. Took a while for me to find this after I soft-bricked my GX8. Thought some people may find this helpful.
Click to expand...
Click to collapse
I don't know...I installed a Stock Rom 6.0 from this forum and screen flickers. They told me to unzip the modem file from a 5.1 (the one Im using right now) and flash it....do you think this will happen again with those stock roms?
zeero said:
Just used this stock firmware to recover my RIO-L03 from softbrick.
you just need to extract dload directory from the ZIP file and then copy the dload directory to the root of a microSD card after that put MicroSD on the phone and press VolUp + VolDown and Power button until the phone vibrates, let go the power button and the Vol Buttons and the phone will begin to flash the FW, from 0% to 100% it will run a FW verification and do a reboot.
then the phone will reboot like 2 times and begin the normal process as new device.
I just want to help any user with the same problem to do it right.
cheers to tomelleri for finding this firmware, you saved my RIO-L03!
Click to expand...
Click to collapse
I have RIO-L03C69B004. Did as suggested, but everytime I reboot it goes to TWRP , and it stays there. I even restored a backup of a few days ago; restarted the phone and everytimes goes back to TWRP.
Any suggestions?
Link is dead - Stock Rom for RIO-L03 c25b131
Hey,
Since the link above is dead does anyone have a stock rom for a huawei rio-l03 c25b131. I tried to google but no luck and nothing on the huawei site either? Or maybe someone knows where to look at or what to use? Please would be a great help!
Thanks in advance!
onion_shredder said:
Hey,
Since the link above is dead does anyone have a stock rom for a huawei rio-l03 c25b131. I tried to google but no luck and nothing on the huawei site either? Or maybe someone knows where to look at or what to use? Please would be a great help!
Thanks in advance!
Click to expand...
Click to collapse
I found this one. Not sure if it is for the dual or single sim version.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v62952/f1/full/update.zip
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
onion_shredder said:
Hey,
Since the link above is dead does anyone have a stock rom for a huawei rio-l03 c25b131. I tried to google but no luck and nothing on the huawei site either? Or maybe someone knows where to look at or what to use? Please would be a great help!
Thanks in advance!
Click to expand...
Click to collapse
Otherwise, you cout try with this post from htcmania.
http://www.htcmania.com/showthread.php?t=1274294

I Need Help On My Huawei P6 Please !

i Just Got My Phone Huawei p6 i just update to 4.4 and My Phone Get So Hot Some Of My friend Tell to downgrade It I just install an app in phone a root it and i use this app to install TWRP.My Phone Just Restarted and Stuck In Logo (Huawei ascend) I just get My Phone to rocovery mode to flash it with Dload Update and He Said Verlist FAIL :crying:
When I get My phone On the USB with pc get dEVICE ANDROID and i dont know How to flash Somone Can Help Please :crying: :crying: :crying:
First of all is that you shoud have informed yourself about the phone and doing some thinkering about flashing or installing custom stuff on it. The P6 heats alot, thats a fact and it shouldnt worry you that much. Ss for update fail thing, sibce you have kitkat on it and you want to go to jellybean you need a middle step to get back. Read through the forum and you can find the files needed and the right steps to do that.
Sent from my SM-G850F
tileeq said:
First of all is that you shoud have informed yourself about the phone and doing some thinkering about flashing or installing custom stuff on it. The P6 heats alot, thats a fact and it shouldnt worry you that much. Ss for update fail thing, sibce you have kitkat on it and you want to go to jellybean you need a middle step to get back. Read through the forum and you can find the files needed and the right steps to do that.
Sent from my SM-G850F
Click to expand...
Click to collapse
hello.and thanks for your helping me . i just try the middle step (p6 unicorn) it just say fail at last look like the stock and costom roms :'( can i fix this ?
AyMen97 said:
hello.and thanks for your helping me . i just try the middle step (p6 unicorn) it just say fail at last look like the stock and costom roms :'( can i fix this ?
Click to expand...
Click to collapse
Try transfering the dload folder from sdcard to internal storage.
Sent from my SM-G850F
tileeq said:
Try transfering the dload folder from sdcard to internal storage.
Sent from my SM-G850F
Click to expand...
Click to collapse
HOW ? My Phone Cannot show only the logo

Categories

Resources