[Q] N7100 MI6 4.3 Touchwiz Port to N7105(and others) impossible? Insane? - Galaxy Note II Q&A, Help & Troubleshooting

Ok, so I downloaded Dr. Katan's MI6 ROM for the 7100 and with a touch of insanity installed it to my AT&T phone. IT BOOTED RIGHT UP!
All while using the stock 4.3 Kernel that came with it!
Whole ROM runs perfectly, I have WiFi and GPS and everything's great EXCEPT, no cell signal :crying: When I try to look at the APNs it says No Sim Card.
I flashed the AT&T modem again. That changed nothing.
So, I figured I'd follow a port guide: http://forum.xda-developers.com/showthread.php?p=40575946
It didn't work. Installs fine, but the phone just won't boot with it. Just sits there and vibrates occasionally with a black screen.
I figured since it's a 4.3 ROM, I should use a 4.3 base, so I used Beanstalk for AT&T (my daily driver, NOT a Touchwiz Rom).
Should I try it with the stock 4.1 Touchwiz ROM as the base? It seems counter-intuitive, but I could be wrong, as this is my first stab at this.
Since just the modem is the issue, is there one part of the porting that I should be paying extra attention to?
Unfortunately while typing this, I just discovered that the S-Pen isn't working either... It detects it's being removed/inserted, but it doesn't work on the screen.
I'm not seeing anything else on this topic other than "WHEN", "WHY NOT ME", and "THIS IS N7100 ONLY, IT'LL BRICK YOUR PHONE DON'T TOUCH IT GET AWAY FROM IT GO BACK TO AT&T"
Obviously it doesn't brick your phone and I don't want to until December if I can help it.
I'm no dev. I'm what could be considered a Script Kiddy at best, but I'll do all I can to make this work.
Any help would be appreciated!!

Strange that there's no actual developers on this... My attempts thus far have failed.

h00rj said:
I'm no dev. I'm what could be considered a Script Kiddy at best
Click to expand...
Click to collapse
Hey, script kiddies are heroes every day around here...

Did you have a look at these porting guides as well?
1. http://forum.xda-developers.com/showthread.php?t=2102283
2. http://forum.xda-developers.com/showthread.php?t=2018411
3. (MOD ROM: Note3 apps for Note2 - This might help with the SPen/Air Commands)
http://forum.xda-developers.com/showthread.php?t=2467810
Attached are the recommended apk files, resourcemanager.apk that you're supposed to replace and penwindowmanager_v1.apk
Godspeed man!!! Keep trying, tweaking and testing! I hope you have success and share it with us!!

GalaxyUser said:
15. Reboot to Ubuntu.
Open dsixda's Android Kitchen
Decompile both boot.img/kernel
Open both init.rc files
In CM/AOSP kernel replace BOOTCLASSPATH by the one from PORT boot.img ROM
Save and recompile kernel
Use CM/AOSP modified kernel in your rom.
Click to expand...
Click to collapse
How did you do this? I'm completely lost!!!! I copied the contents of "Android-Kitchen-0.224" over to "c:\cygwin64\home\ME" and am in ubuntu, run "menu" from inside there and then am confused and lost.

h00rj said:
Strange that there's no actual developers on this... My attempts thus far have failed.
Click to expand...
Click to collapse
You can stop trying to port and start flashing: http://forum.xda-developers.com/showthread.php?t=2496292, it's officially leaked... That is if you have a AT&T Note 2, which I take it that you do after reading your post.

n1nj4Lo said:
You can stop trying to port and start flashing: http://forum.xda-developers.com/showthread.php?t=2496292, it's officially leaked... That is if you have a AT&T Note 2, which I take it that you do after reading your post.
Click to expand...
Click to collapse
Right there with ya, bro! You flash it yet? I'm waiting until after work...

h00rj said:
Right there with ya, bro! You flash it yet? I'm waiting until after work...
Click to expand...
Click to collapse
Not yet downloading now though, or attempting to... Then to figure out which way to flash it. Crazy I spent all day yesterday trying to port and flash different combo's of AOKP/CM 4.3 and N7100 4.3 messing with boot.img's and .co files and all that stuff, now this happens today, AWESOME! LoL

Related

[REQUEST]Hybrid R4 Final > AOSP Clone <

Hello,
Is there any chance we will see Eugene's AOSP Vibrant ROM on our I9000 Froyo ?
It would be what a lot of us are looking for in a while.
Link to Eungene's ROM : http://forum.xda-developers.com/showthread.php?t=773018
The vibrate version is fully functional on I9000,
Use odin to flash JM9 first, the apply the ASOP on top. Very nice rom and the fastest for SGS, apps open instantly.
DocRambone said:
The vibrate version is fully functional on I9000,
Use odin to flash JM9 first, the apply the ASOP on top. Very nice rom and the fastest for SGS, apps open instantly.
Click to expand...
Click to collapse
He did ask for a Froyo version though
Was not aware that this can be used with 2.1
Maybe I will give it a try
@DocRambone: I saw that you asked Eugene on how to optimize his ROM for I9000. What about porting this to 2.2 ?
I will buy you lots of beer.
Thanks
do the download and recovery keys stay in the same place if you put this rom on?
Ladduro said:
Was not aware that this can be used with 2.1
Maybe I will give it a try
@DocRambone: I saw that you asked Eugene on how to optimize his ROM for I9000. What about porting this to 2.2 ?
I will buy you lots of beer.
Thanks
Click to expand...
Click to collapse
The port to froyo is a monumental task, and well above my skills.
Will need a truck of beer
SupaDuckie said:
do the download and recovery keys stay in the same place if you put this rom on?
Click to expand...
Click to collapse
Most likely yes. It should not affect Combo Buttons
DocRambone said:
The port to froyo is a monumental task, and well above my skills.
Will need a truck of beer
Click to expand...
Click to collapse
Well, I am not rich enough for a truck, but I can give a pack or two
EDIT: I am currently flashing to JM9 with JM7 modem and CSC, then will apply R4. By any chance are you aware how to remove Vibrant logo at boot ?
what thas it mean can we put this rom in our i90000 with no trouble and the other rom like bionix?could we put them in there?
Dont know about bionix, but as Doc said, it should work with JM9. As said, I will flash and try and let you know the result. Fingers crossed.
Jm9 and this excellent rom is ok, i use it right now.
There is a bug tho:
http://forum.xda-developers.com/showpost.php?p=8702548&postcount=964
thks doc which one are u using 2.2?ive u try the bionix one on your i9000
fbousk said:
thks doc which one are u using 2.2?ive u try the bionix one on your i9000
Click to expand...
Click to collapse
This ASOP r4 is not froyo, its 2.1 rom. Make sure that the rom you take from Vibrate forum don't include kernel or modem.. or you may brick your phone otherwise
So wat exactly do you need to do in odin after flashing JM9 with the zip file from the vibrant forum and the freezing fix?
moosamm said:
So wat exactly do you need to do in odin after flashing JM9 with the zip file from the vibrant forum and the freezing fix?
Click to expand...
Click to collapse
Install jm9, factory reset, install the Hybrid r4Asop, use rootmangager (or other filemanager or adb) to put the playslogo file in system/bin
When you install the Hybrid r4Asop rom, do you use the normal recovery or something else?
moosamm said:
When you install the Hybrid r4Asop rom, do you use the normal recovery or something else?
Click to expand...
Click to collapse
I use clockwork recovery.
ok, thanks. Will give it a shoot and report back.
Ok, have a problem. Flashed JM9 and now my SIM card does not accept PIN. It constantly staying at unlocking SIM card... Any idea ?
This rom is so bloody fasttt on my i9000 im loving it right now omgsh orgasm*
Indeed very very fast... Too bad my SIM does not get unlocked. Its useless to me

Porting Roms

With the SII, there were Threads on how to port Roms from the international to US version. I tried a few and was successful and I'm really not a programmer but willing to learn. Since there appears to be similarity between the Note 8 and 10.1 could a "how to" be developed to do this? Maybe its too hard and too involved, but thought I'd ask.
rfb813 said:
With the SII, there were Threads on how to port Roms from the international to US version. I tried a few and was successful and I'm really not a programmer but willing to learn. Since there appears to be similarity between the Note 8 and 10.1 could a "how to" be developed to do this? Maybe its too hard and too involved, but thought I'd ask.
Click to expand...
Click to collapse
I cant say this will work for sure, as i dont have the device I cant say. But considering the similarities between devices, this is what you should do:
1. replace usr / vendor / bin / xbin from 8.0 to 10.1 rom
2. replace boot.img
3. logcat alot.
emwno said:
I cant say this will work for sure, as i dont have the device I cant say. But considering the similarities between devices, this is what you should do:
1. replace usr / vendor / bin / xbin from 8.0 to 10.1 rom
2. replace boot.img
3. logcat alot.
Click to expand...
Click to collapse
Tried a 10.1 Rom but when I tried to replace the files It wouldn't let me. Got an error code.
Unpack both to seperate folders, replace the stuff, repack as zip. goto CWM and mount system just in case and flash
emwno said:
Unpack both to seperate folders, replace the stuff, repack as zip. goto CWM and mount system just in case and flash
Click to expand...
Click to collapse
I ended up doing that. flashed it. Got though the Aroma and booted. Got the boot sound but the screen was black. I didn't do anything to the build prop, would that have a problem? I didn't mount system.
Thanks 9LC2099589165590C
rfb813 said:
I ended up doing that. flashed it. Got though the Aroma and booted. Got the boot sound but the screen was black. I didn't do anything to the build prop, would that have a problem? I didn't mount system.
Thanks 9LC2099589165590C
Click to expand...
Click to collapse
Thankyou for that! im one step closer to getting the note 8.0. Anyways do
Code:
adb logcat > logcat.txt
and send me the output file. From there we can figure out what went wrong.
emwno said:
Thankyou for that! im one step closer to getting the note 8.0. Anyways do
Code:
adb logcat > logcat.txt
and send me the output file. From there we can figure out what went wrong.
Click to expand...
Click to collapse
Sorry not familiar with adb and getting logcat. In reviewing the setup from Aroma I noticed it flashed the 10.1 8010 wifi only kernel. Maybe I have to flash the kernel for the 5110. How do I get the kernel for the 5110?
http://pastelink.me/dl/f69bca here you go. replace boot.img in aroma folders with this.
or package to tar and flash with odin
emwno said:
http://pastelink.me/dl/f69bca here you go. replace boot.img in aroma folders with this.
or package to tar and flash with odin
Click to expand...
Click to collapse
I had previously replaced the boot image in all the options. I replaced them again and flashed. Same situation, get boot sound but black screen. I have been using this one ROM maybe I'll give another one a try. But will stop for today. Thanks for your help.
Tried another ROM this morning. Started booting but black screen. Been trying to port Note 10.1 Roms. Checking the specs the Note 8.0 looks more like a large Note II. Any Ideas about porting from the Note II to the Note 8.0?
rfb813 said:
Tried another ROM this morning. Started booting but black screen. Been trying to port Note 10.1 Roms. Checking the specs the Note 8.0 looks more like a large Note II. Any Ideas about porting from the Note II to the Note 8.0?
Click to expand...
Click to collapse
I cant say anything till I have the device in hand. 53/400 received . But logcatting is the way to go.
emwno said:
I cant say anything till I have the device in hand. 53/400 received . But logcatting is the way to go.
Click to expand...
Click to collapse
A little more to get you going: 7SV917532E125122K
Its great that we are working to get developers interested in the Note8.0. There are already many custom Roms out for the 10.1 and the Note II.
With the similar Hardware on both these devices I would hope we could find a way of porting some of these Roms to the Note 8.0. This would open up the options to Note 8.0 users dramatically. I have attempted to port but I don't have the skills needed. Can anybody with more knowledge be it the original developer or a more experienced person get behind this effort?
rfb813 said:
A little more to get you going: 7SV917532E125122K
Click to expand...
Click to collapse
Thanks alot for that!
rfb813 said:
Its great that we are working to get developers interested in the Note8.0. There are already many custom Roms out for the 10.1 and the Note II.
With the similar Hardware on both these devices I would hope we could find a way of porting some of these Roms to the Note 8.0. This would open up the options to Note 8.0 users dramatically. I have attempted to port but I don't have the skills needed. Can anybody with more knowledge be it the original developer or a more experienced person get behind this effort?
Click to expand...
Click to collapse
Yeah stock ROMs can be ported easily (after i find all proprietary files for this device). The first one i'll be porting is this:
http://forum.xda-developers.com/showthread.php?t=2216311 or the note 10.1 stock ROM
emwno said:
Thanks alot for that!
Yeah stock ROMs can be ported easily (after i find all proprietary files for this device). The first one i'll be porting is this:
http://forum.xda-developers.com/showthread.php?t=2216311 or the note 10.1 stock ROM
Click to expand...
Click to collapse
Thanks for all your efforts!
emwno said:
I cant say anything till I have the device in hand. 53/400 received . But logcatting is the way to go.
Click to expand...
Click to collapse
thanks
a small amount more
Confirmation number: 9U066822MS474510V
emwno said:
Thanks alot for that!
Yeah stock ROMs can be ported easily (after i find all proprietary files for this device). The first one i'll be porting is this:
http://forum.xda-developers.com/showthread.php?t=2216311 or the note 10.1 stock ROM
Click to expand...
Click to collapse
My savior. I'm definitely keeping the 8 now.
Now time for a donation to get you going. Thanks in advance.
Here you go
07451430F6622524S
I was looking at getting this device. If I end up getting one I'll def help get ROMs up and going
Sent from my SGH-T679 using xda premium
Thank you to all who donated
At 102/400. 1/4 of the way there.
gl man if you get it before me (you prob will) let me know if i can help any. im experienced in porting roms from different chipsets so doing it for identical chipsets should be a walk in the park

If a rom doesn't include FFC capability

Theres other camera apps that support it right? or do you just need to chose a rom that does have the capability?
Calbha said:
Theres other camera apps that support it right? or do you just need to chose a rom that does have the capability?[/QUOTE
What kind of ROM are you talking about? Because you won't find any Jelly Bean with FFC and market apps don't work either. Do not waste money or time looking for a FFC. It's not gonna happen. If you want a badass ROM that has the look, speed, and performance of a newer ROM with everything working, try this ROM out. http://forum.xda-developers.com/showthread.php?t=2141593
Throw the Next 3D launcher on that badboy and you're gonna be in good shape. Promise.
You can find lots of information here about this if you dig a little. There is a search box. Get familiar with that, and you'll learn a lot on your own. Just type random questions or shorten them to a key word or two. I've only been here for a few months, but I've ran through the basics and I'm getting familiar with other aspects besides user options.
Click to expand...
Click to collapse
Sleepycloud said:
Calbha said:
Theres other camera apps that support it right? or do you just need to chose a rom that does have the capability?[/QUOTE
What kind of ROM are you talking about? Because you won't find any Jelly Bean with FFC and market apps don't work either. Do not waste money or time looking for a FFC. It's not gonna happen. If you want a badass ROM that has the look, speed, and performance of a newer ROM with everything working, try this ROM out. http://forum.xda-developers.com/showthread.php?t=2141593
Throw the Next 3D launcher on that badboy and you're gonna be in good shape. Promise.
You can find lots of information here about this if you dig a little. There is a search box. Get familiar with that, and you'll learn a lot on your own. Just type random questions or shorten them to a key word or two. I've only been here for a few months, but I've ran through the basics and I'm getting familiar with other aspects besides user options.
Click to expand...
Click to collapse
I do use the search box as much as possible, one last quick question though as ive tried googling and the search box, how can i tell if i have the evo OG or LTE im reading on some forums that the OG doesn't have a FFC. mine does but i was sure it was the EVO OG.
Click to expand...
Click to collapse
Calbha said:
Sleepycloud said:
I do use the search box as much as possible, one last quick question though as ive tried googling and the search box, how can i tell if i have the evo OG or LTE im reading on some forums that the OG doesn't have a FFC. mine does but i was sure it was the EVO OG.
Click to expand...
Click to collapse
It's cool bro. You can ask any questions you want. Don't hesitate. I might not be able to answer them all, but I can help you find an answer. As for finding out which phone model you have, go to settings, then about phone. Look at the model number. If it says PC36100 you have the Evo 4G, otherwise known as the OG. If it's anything else besides PC36100, you'll have to google it to find out what kind of phone you have.
Click to expand...
Click to collapse
The og (HTC evo 4g, aka supersonic) does have a ffc but it only has drivers for Gingerbread Roms. You have flashed roms from this forum I have tried helping you with some of your mms issues. If you had the lte than your phone would most likely be in sad shape. Flashing things not designed for your phone can cause big issues even brick it ( phone will never work again). As some users have found out the hard way already.
So plainly put you have an Og. Now this should have been the first question you asked before flashing anything.
Also I am working on a couple cricket roms for all the users on here. The first set will be sense based sense 1.0, 3.0, and 3.5. All with confirmed working mms and great battery life. I am also working on cm7, ics, and jelly bean.
Sent from my daughters htc_supersonic using xda app-developers app
jlmancuso said:
The og (HTC evo 4g, aka supersonic) does have a ffc but it only has drivers for Gingerbread Roms. You have flashed roms from this forum I have tried helping you with some of your mms issues. If you had the lte than your phone would most likely be in sad shape. Flashing things not designed for your phone can cause big issues even brick it ( phone will never work again). As some users have found out the hard way already.
So plainly put you have an Og. Now this should have been the first question you asked before flashing anything.
Also I am working on a couple cricket roms for all the users on here. The first set will be sense based sense 1.0, 3.0, and 3.5. All with confirmed working mms and great battery life. I am also working on cm7, ics, and jelly bean.
Sent from my daughters htc_supersonic using xda app-developers app
Click to expand...
Click to collapse
Thank you again for your help gentlemen. I figured I had the OG but was starting to wonder when I read incorrect info saying the OG didn't have a ffc. I'm becoming more proficant in flashing roms and terms and what to look for in a Rom. A sense cricket Rom would thrill me as editing apns is not working. The only thing I've had work was a mazwoz everything cricket Rom, however as stated before the roms battery usage was 1% a minute, no Bluetooth capability, (which id rather over a ffc) .
With the newest recovery options, (especially including the usb toggle feature) bricking seems like it'd be impossible .
Calbha said:
Thank you again for your help gentlemen. I figured I had the OG but was starting to wonder when I read incorrect info saying the OG didn't have a ffc. I'm becoming more proficant in flashing roms and terms and what to look for in a Rom. A sense cricket Rom would thrill me as editing apns is not working. The only thing I've had work was a mazwoz everything cricket Rom, however as stated before the roms battery usage was 1% a minute, no Bluetooth capability, (which id rather over a ffc) .
With the newest recovery options, (especially including the usb toggle feature) bricking seems like it'd be impossible .
Click to expand...
Click to collapse
You know, soul hacker posted the Cricket mms apk that you can manually download and install yourself..... Its all in the same thread as Mazwoz Cricket ROM...... I have used that MMS on my own ROMs for myself when I'm not busy on a test or flash fest. Using the same method soul hacker has posted in that thread, it works just fine for me.
Wambo_Bomb said:
You know, soul hacker posted the Cricket mms apk that you can manually download and install yourself..... Its all in the same thread as Mazwoz Cricket ROM...... I have used that MMS on my own ROMs for myself when I'm not busy on a test or flash fest. Using the same method soul hacker has posted in that thread, it works just fine for me.
Click to expand...
Click to collapse
I tried copying that mms.apk over to other roms n is get fc errors everytime
Calbha said:
I tried copying that mms.apk over to other roms n is get fc errors everytime
Click to expand...
Click to collapse
1. It only either works on 4.2 or 4.1
2. First delete the original. Then copy the the new one in.
3. Set perms to rw-r-r
4. Reboot and done.
Wambo_Bomb said:
1. It only either works on 4.2 or 4.1
2. First delete the original. Then copy the the new one in.
3. Set perms to rw-r-r
4. Reboot and done.
Click to expand...
Click to collapse
forgive me if I sound stupid, but 4.2 or 4.1 for what? I downloaded the apk in that ROM post of 4.2 copied it over to system apps, the permissions were already set how they should be rebooted and it would force close when I would try and open it .I even used Titanium Backup to try and restore it over it wouldn't restore, and tried using package installer and it would say parsing error or something like that. I'm currently running the digital karma rom v9.
Calbha said:
forgive me if I sound stupid, but 4.2 or 4.1 for what? I downloaded the apk in that ROM post of 4.2 copied it over to system apps, the permissions were already set how they should be rebooted and it would force close when I would try and open it .I even used Titanium Backup to try and restore it over it wouldn't restore, and tried using package installer and it would say parsing error or something like that. I'm currently running the digital karma rom v9.
Click to expand...
Click to collapse
Android Jellybean 4.1 or 4.2
Those mms.apk's will not work on Gingerbread, Sense or any Android version below 4.1
Wambo_Bomb said:
Android Jellybean 4.1 or 4.2
Those mms.apk's will not work on Gingerbread, Sense or any Android version below 4.1
Click to expand...
Click to collapse
I figured that's what it was but was under the impression 2.3.5 was the current Android version. I'll look up upgrading to 4.2 tonight n let u know how it goes. Probably explains why I couldn't get dirty unicorn Rom to install thnx again.
Calbha said:
I figured that's what it was but was under the impression 2.3.5 was the current Android version. I'll look up upgrading to 4.2 tonight n let u know how it goes. Probably explains why I couldn't get dirty unicorn Rom to install thnx again.
Click to expand...
Click to collapse
Dirty Unicorns is 4.2.2 which is what you will need (I used the 4.2 mms apk on Dirty Unicorns too) and what was the problem with it not loading?
Wambo_Bomb said:
Dirty Unicorns is 4.2.2 which is what you will need (I used the 4.2 mms apk on Dirty Unicorns too) and what was the problem with it not loading?
Click to expand...
Click to collapse
It gave an error upon flashing. Don't recall the exsact error but it didn't even start the installation process ill let you know when I get home a little later. But I made sure to do several wipes on everything before flashing.
Deleted.
FinZ28 said:
I installed DU this morning with no issues whatsoever. Might want to check and make sure you don't have a bad download, and try again.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Tried 3 times with the download n install. I'll try again and report with the error.
Wambo_Bomb said:
Dirty Unicorns is 4.2.2 which is what you will need (I used the 4.2 mms apk on Dirty Unicorns too) and what was the problem with it not loading?
Click to expand...
Click to collapse
Is there a ffc fix for this Rom? other roms I've seen got this working.
No FFC for any jellybean or ICS ROMs. Only gingerbread (2.3.5) ROMs will have FFC.
Also you will want to use an amon Ra style recovery. Cwm and twrp are not very good options for this phone. Diablo has a few themed versions you might like.
Here os the link.
http://forum.xda-developers.com/showthread.php?p=38624153 from my PC36100 using xda app-developers app
Wambo_Bomb said:
No FFC for any jellybean or ICS ROMs. Only gingerbread (2.3.5) ROMs will have FFC.
Click to expand...
Click to collapse
So after 2 weeks of trying to figure out MMS much thanks to wambo bomb and the rest of you in this thread for your patience with this newb I got MMS working on the fast and stable, (with Bluetooth) dirty unicorn ROM.(battery is bad which is why its been draining so quickly with other ROMs) I shoulda known the MMS 4.2 stood for androids version. For some weird reason I was thinking it was the mms's version. I find it interesting older versions of android have the FFC working though but not newer ones. Oh well I'd much much rather have MMS than FFC. If I had money to donate to you and the others I definatly would I'm sorry I don't though. As stated before I'm disabled and can't get on disability yet. If I do get on it I'll be happy to donate to all of you for your help. Many thanks again for educating me so I can help others in the future.

[Q] Advise on Rom choice

Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Biker1bob said:
Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Click to expand...
Click to collapse
Try this one out Ive been running this ever since it came out im on the buttnaked version and its almost like being on cm with how fast it is
http://forum.xda-developers.com/showthread.php?t=2803363
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
OK, couple of things
1. I see so much talk about the bootloader for this phone.. is there an FAQ or can someone help me know what bootloader I have? what I want? and what my dangers are??
2. I need a phone I can listen to text msgs from people through bluetooth and then send a text using bluetooth voice .. So I need a rom and I think s-talk? to do this??
3. Is there an IRC channel for XDA? or somewhere I can chat with people about this realtime??
Thanks
James
Biker1bob said:
Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Click to expand...
Click to collapse
Keep what u have.
Sent from my SGH-I317 using XDA Free mobile app
Slimfast seems ok, development seems to have stopped.
what about the rom based on the N7100 official?
James
Biker1bob said:
OK, couple of things
1. I see so much talk about the bootloader for this phone.. is there an FAQ or can someone help me know what bootloader I have? what I want? and what my dangers are??
2. I need a phone I can listen to text msgs from people through bluetooth and then send a text using bluetooth voice .. So I need a rom and I think s-talk? to do this??
3. Is there an IRC channel for XDA? or somewhere I can chat with people about this realtime??
Thanks
James
Click to expand...
Click to collapse
Well if you looking for something with svoice you would wanna do a touchwiz rom
OK, I am looking at a few different roms.
I see there was an offical a few weeks ago and that they one has been ported to the i317m - which one is that?
I also see lots of talk about bootloaders.. I see 4.2 4.3 etc.. my bootloader is i317mvlucmk5... I see nothing about 4.2 or 4.3?? what do I have??
Thanks
James
terpin32 said:
Well if you looking for something with svoice you would wanna do a touchwiz rom
Click to expand...
Click to collapse
The one I have 4.4 slimfast is a tw rom correct?
I messed it up some.. I think I will reflash.. but there is so much talk about bootloaders and deoxed, etc.etc.. this much more complicated than my old LG and Cyanogen.
James
Biker1bob said:
The one I have 4.4 slimfast is a tw rom correct?
I messed it up some.. I think I will reflash.. but there is so much talk about bootloaders and deoxed, etc.etc.. this much more complicated than my old LG and Cyanogen.
James
Click to expand...
Click to collapse
It's not any more complicated. Don't worry about odex and stuff. Just stay in the development threads here and flash what you like. Not trying to be mean here but these types of threads are not necessary. Just make a nandroid and flash away and see what best fits your needs. Each rom is subject to opinion. I use slimfast and have had no issues with it.
Sent from my SGH-I317 using XDA Free mobile app
Eternalty said:
It's not any more complicated. Don't worry about odex and stuff. Just stay in the development threads here and flash what you like. Not trying to be mean here but these types of threads are not necessary. Just make a nandroid and flash away and see what best fits your needs. Each rom is subject to opinion. I use slimfast and have had no issues with it.
Sent from my SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
I keep asking questions, and you give me other replies rather than answers... If might be straightforward and easy for you. and maybe screwing around with a $350 phone is no issue for you.. but me.. not so much.
"In theory you should be fine if you do dirty flash from another 4.3 rom such as DN3 v1.0 or SN10
We recommend TWRP 2.6.3.1 to flash this rom.
You need 4.3 boot loader.
Have both TWRP and latest CWM on your external SD Card along with Ditto Note 3.1.1
Flash TWRP 2.6.3.1, go into Wipe and slide to do the Factory Reset."
This is not straight forward to me.. since I have no idea if I have a 4.3 bootloader - says I HAVE TO HAVE ONE.
TWRP is at 2.7 now .. is there a reason he says to use 2.6.3.1??? on a rom that was updated 3 days ago??
These are the things that bother me.. I am not interested in bricking my phone.
If you dont want to help.. fine, But explanations for the terms used above are not coming up in searches, unless I want to read a ton of threads.. so I thought someone might answer for me.
James
Biker1bob said:
I keep asking questions, and you give me other replies rather than answers... If might be straightforward and easy for you. and maybe screwing around with a $350 phone is no issue for you.. but me.. not so much.
"In theory you should be fine if you do dirty flash from another 4.3 rom such as DN3 v1.0 or SN10
We recommend TWRP 2.6.3.1 to flash this rom.
You need 4.3 boot loader.
Have both TWRP and latest CWM on your external SD Card along with Ditto Note 3.1.1
Flash TWRP 2.6.3.1, go into Wipe and slide to do the Factory Reset."
This is not straight forward to me.. since I have no idea if I have a 4.3 bootloader - says I HAVE TO HAVE ONE.
TWRP is at 2.7 now .. is there a reason he says to use 2.6.3.1??? on a rom that was updated 3 days ago??
These are the things that bother me.. I am not interested in bricking my phone.
If you dont want to help.. fine, But explanations for the terms used above are not coming up in searches, unless I want to read a ton of threads.. so I thought someone might answer for me.
James
Click to expand...
Click to collapse
If that's what the developer says to use then use it. I would say he knows why to use 2.6.3.1 but that's not really important. Samsung phones are very hard to brick if you follow the directions. I'm no expert dude, all I do is follow the directions in the OP. If you do that you will be fine. What were you running prior to slim fast? If you're not sure you have the bootloader you can just flash it again.
Sent from my SGH-I317 using XDA Free mobile app
The best thing to do at XDA is read and learn. Reading the forums is the best way to find what you are seeking. Closed.

new developer, help please.

Thank you for your time.
First of all I have been rooting and unlocking many android devices and variants for years now. I have had some amazing success at it as I am pretty good at reading and following directions. I have decompiled and made some small mods to different roms, edited build.prop files. I am well versed in adb and fastboot commands as well as using odin and heimdall. i know how to record and read logcats.
That said I have a bootloader unlocked dev edition vzw s5, and would like to try my hand at fully porting a rom. Specifically from a GSM s5 to Verizon CDMA. Once I get it functional on MY device i would then like to mod it to be safestrap flashable for those that dont have dev edition verizon s5's. I should also mention i have the dev's blessing to do this and if i share it i will make sure first and foremost to give the original dev credit.
The problem is all the guides i find, even on here, seem to be outdated and dont quite work all the way. So if someone could point me to a good CURRENT (android 5.0 and up) guide for this or maybe guide me a little through the process, I would be eternally gratefull and would include whoever helps (and there donation links) in the credits if i share the finished rom.
Again thank you in advance for your time and consideration, if it weren't for the community here at xda the entire android world would be a much more different and boring place.
I am looking to bring the maverick s6 v4.5 to the Verizon s5. It is already available for every other variant
kxhan15 said:
I am looking to bring the maverick s6 v4.5 to the Verizon s5. It is already available for every other variant
Click to expand...
Click to collapse
It should work, and fix radio is a thing of 5 minutes
BlackMesa123 said:
It should work, and fix radio is a thing of 5 minutes
Click to expand...
Click to collapse
Already done but thank you. Mods please mark as solved.
kxhan15 said:
Already done but thank you. Mods please mark as solved.
Click to expand...
Click to collapse
Hi there, i was wondering, a re e you gonna release that rom if you got it working? And could you share your process on converting the radio stuff? Ive been looking into doing the same with my sprint galaxy s5 (uses same technology to connect to the cell towers) but have been in the same situation as you. Thanks.
chippinganimal said:
Hi there, i was wondering, a re e you gonna release that rom if you got it working? And could you share your process on converting the radio stuff? Ive been looking into doing the same with my sprint galaxy s5 (uses same technology to connect to the cell towers) but have been in the same situation as you. Thanks.
Click to expand...
Click to collapse
Are familiar with decompiling and rebuilding apks, modding the build.prop, framework-res and rebuilding roms?
kxhan15 said:
Are familiar with decompiling and rebuilding apks, modding the build.prop, framework-res and rebuilding roms?
Click to expand...
Click to collapse
Yes to everything ecxpet for the building apks part lol. Yeah feel free to write out a how to guide on doing it, because there are probably people out there who would love that, including me! And i think there might also be someone who will create a script thatll do it automatically, Depending on what the process is.

Categories

Resources