Develop Bugs

[KK 4.4.4][ROM]Mackay ROM 4.9.13 (11-Oct-2014)

I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21

Reserved

10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.

kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?

marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.

Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job

Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that

kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet

limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.

kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?

marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...

this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?

rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.

thank you for this:good:

kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?

A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!

Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.

Thanks for the rom, There isnt any bug list?

Installed on CM11 and works fine.No forced closure and fast enough to be a test.

so no separate kernel 0.600

[ROMS][KK][From Source] Sonic ROM [SOKP] & [PORTED] XenonHD & BeanStalk

Hello Everyone!!
So here is a new ROM I compiled yesterday, it does have a lot of features and it is called SONIC OPEN KANG PROJECT
I didn't open a new thread for it because I'm not gonna be updating it unless many users encourage me to do so...
Anyway I thought I should share it with you guys, for who ever wanna test it
Here is this ROM's features:
http://sonic-developers.com/?page_id=160
Also here is a quick review for the ROM:
And for more info visit their website:
http://sonic-developers.com
Download Link:
I've started uploading my files to androidfilehost.com , hoping you like it more than Dev-host
SOKP-MS-04-KK444-KTU84Q-20140726-amami.zip
Here are my screenhots as well:

Hello Guys,
Since our lovely Z1C is relatively new, it doesn't have many CM based ROMs, so I thought why not porting some
from the closest phone to ours (which is obviously Xperia Z1).
So I'll be presenting five ports for five ROMs as mentioned in the title, but I'm gonna start with a simple guide for how to port the ROM yourselves
All you have to do to port a CM11 based ROM from Z1 is:
Download the Z1 ROM and extract it wherever you want
Open META-INF\com\google\android\updater-script with any text editor and remove first five lines (assert)
Download This for old builds, and This for new builds, then unzip it
Copy and replace "boot.img" from the previous zip to your Z1 ROM
Copy and replace "modules" folder to system\lib\modules in your Z1 ROM
Open system/build.prop with any text editor and change this value:
Code:
# Graphics
ro.sf.lcd_density=480
to become:
Code:
# Graphics
ro.sf.lcd_density=320
that is it, although there are optional things you may do before compressing the ported ROM:
In system/build.prop search for honami and replace them with amami
And then search for C6903 and replace them with D5503
Also you may wonna add "Compact" here:
ro.product.model=Xperia Z1 Compact
Click to expand...
Click to collapse
You may also open META-INF\com\android\metadata and do the same replaces
Resign the ROM.zip after compressing it
Important Notes:
DO THIS ON YOUR OWN RISK
You must be running KK ROM before flashing these ROMs down below
This method won't work on Slimkat, although you can grab it from Here
All bugs in these ROMs are related to the original ROM not issues caused by posting
Fell free to report any bugs you face though, and I'll enlist them in known issues
PacMan ROM and MoKee ROM are officially supported, so there is no need to port them
Instructions for all ROMs down below:
Copy the zip to your device
Reboot into recovery
Backup of your system (optional)
Do a factory reset and format [/system]
Flash the Zip

XenonHD & BeanStalk
:::The XenonHD ROM:::
This was built in (2014-04-02) [Build 5]
It contains CM11 FXP312 Kernel
Zip is resigned
Screenshots:
Download link:
update-XenonHD-04-02-14-signed-amami.zip - 238.44 MB
New build's port can be found here: (Not tested by me)
http://forum.xda-developers.com/showthread.php?p=53365536
For more info and screenshots, visit the Original Thread
:::The BeanStalk ROM:::
This was built in (2014-03-11) [Build 3]
It contains It contains CM11 FXP312 Kernel
It has random reboot bug
Zip is resigned
Screenshots:
Download link:
BeanStalk-4.4.255-20140311-amami.zip - 251.39 MB
For more info and screenshots, visit the Original Thread

:::Gapps:::
GApps Standard 4.4.2 (10/5)
Removes AOSP Camera and AOSP Gallery and Replaces it with the Google variants
Removes AOSP Launcher2/Launcher 3 and CM Trebuchet and Replaces it with Google Now Launcher
Adds Google Search aka Google Now
All necessary syncing apks and libs
GApps Minimal 4.4.2 (10/5)
~20 MB
Playstore
Syncing apks and libs, etc.
Google Camera 4.4.2 (16/1)
Automatically removes AOSP Camera/Gallery and adds Google Camera/Gallery
FaceLock 4.4.2 (10/5)
Adds Face unlock
GenieWidget 4.4.2 (10/5)
Adds stock news and weather widget
AOSP Calendar Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Calendar (not in Core or Standard packages)
AOSP Browser Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Browser (not in Core or Standard packages)
This was copied and pasted from Original Thread (you can find more Gapps mirrors here)
Personally I prefer [and have tested] the minimal Gapps package, it is the best

Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...

wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?

juried said:
Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...
Click to expand...
Click to collapse
actually, just today; @akshaybz has opened a thread for slimkat (not ported, compiled) here:
[ROM][4.4.2][KOT49H] SlimKat - Amami [Build 4][Alpha][UNOFFICIAL]
Enjoy
xhizors said:
wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?
Click to expand...
Click to collapse
Well I didn't test everything, but the ROM was flawless, wifi is OK
Yes just flash rom and some gapps, try it and give a nice feedback

Might be a dumb question, but will updating them through the rom settings mess anything up?

RevokOne said:
Might be a dumb question, but will updating them through the rom settings mess anything up?
Click to expand...
Click to collapse
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away

omarainea said:
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away
Click to expand...
Click to collapse
I been building ROMs on linux trying and testing build from source..Im new to it and the device has been a long time HTC user. So guess all are from Z1 with afew changes you posted similar to the stock port way. I built a few roms so apart from the one I'm supporting. Carbon and PAC ROM has shown
Sent from my Xperia Z1 Compact using Tapatalk

Thread Updated
Ported MoKee 2014-03-31 Release
Ported Carbon 2014-04-01 (Build 2)
Also updated kernel in OP and in these two builds to 3.4.0 CM11 gb37510f From FXP313
I think I'll be updating the thread every week from now on, until these ROMs get a compiled version
Enjoy

How are the cameras qualities on these roms?
---
Sendt fra LG G Pad

slonn said:
How are the cameras qualities on these roms?
---
Sendt fra LG G Pad
Click to expand...
Click to collapse
Exactly like in CM11.0

omarainea said:
Exactly like in CM11.0
Click to expand...
Click to collapse
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Any updates on the roms btw?
Cheers! :good:

Thread Updated
e2zippo said:
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Click to expand...
Click to collapse
I don't know how to describe its quality, I think the best way to know is by trying
e2zippo said:
Any updates on the roms btw?
Click to expand...
Click to collapse
Yeah it's been a week, so here are the Updates of this week:
Updated Carbon ROM to build 4 (2014-04-09)
Updated MoKee ROM to build 2014-04-04 (its kernel was updated to FXP314)
Added XenonHD ROM latest release build 5 [2014-04-02] (download link in second post)
it is very customizable (can't describe it enough)
you can check more info about it in its main thread
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it

omarainea said:
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it
Click to expand...
Click to collapse
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)

TheQwertiest said:
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)
Click to expand...
Click to collapse
Huh, Thanks for the info bro,
seems like I should read more very now and then to know this kind of stuff.

Thread Updated
Added Paranoid Android ROM
This was built in (2014-04-15)
It contains CM11 20140410-Nightly kernel
Updated MoKee ROM
This was built in (2014-04-14)
The ROM was deodexed (original ROM was odexed)
It contains CM11 20140410-Nightly kernel

hi, should i have a unlock bootloader for test this roms? i can´t unlock it

canteo said:
hi, should i have a unlock bootloader for test this roms? i can´t unlock it
Click to expand...
Click to collapse
unfortunately yes, if you want to flash a custom kernel, you have to have an unlocked bootloader (and that is required to flash custom ROM)

DualBoot Kernels for Ancora

Hello everyone! Thanks to @educk and @h0rn3t for their awesome dualboot project for ancora, and @theloneseeker for his amazing tutorials, I've managed to make ION kernels compatible for dualboot in secondary ROMs, in other words, you're primary ROM can be ION or non-ION, but the secondary ROM had to be non-ION build to work, but now, I've managed to make ION builds dualboot compatible. Therefore, CyanogenMod 10.1 beta 3, CyanogenMod 10.2 alpha 5, CyanogenMod 11 20140323 build (the final 20140413 seems to be unstable for some) and Dark CyanogenMod beta 3 can be installed as secondary ROMs. The procedure on how to dualboot is mentioned in this thread http://forum.xda-developers.com/showthread.php?t=2469803, but I will still provide you with a similar guide in order to avoid errors.
**Installation Guide**:
1- Download the Dualboot1.8.apk from the mentioned thread above in the downloads section.
2- Install busybox and the Dualboot1.8.apk and grant the app root access.
3- Tap on Partitions and set the partition table according to your preference (I have a 4Gb external SD card so there are no exact values for everyone). This step takes most time so be patient.
4- Once done, tap on Tools and then Prepare flashable zip, and direct it to the ROM.zip you want to have as your secondary ROM (ION builds are now working)
5- Choose to wipe data and cache, then choose to Flash now. In recovery, tap on flash untrusted zip and after flashing is done, reboot.
6- Using a file explorer, you will see on your internal SD card that a Dualboot folder exists, and according to your secondary ROM, create a 4.2.2 (for CM 10.1) or 4.4.2 (for CM 11) and place the corresponding boot2.img that I provided. So, you should have something like Dualboot/4.4.2/boot2.img for example.
7- Go back to the Dualboot app and tap on Switch
Viola! Now, you will have ION build secondary ROM! You can have two 4.4.2 ROMs as well, or any other combination
NOTE: The kernels I made are 100% tested by me and are working with no issues whatsoever.
Credits:
-CyanogenMod Team
-Mr. Arne (arco68) for all his work.
-Mr. Radu (arsradu) for his kernel collection and bringing CM 10.2 for our device.
-Osama (Madridii) for his kernels and all his wonderful work and D CM 11 :highfive:
-Daniel (theloneseeker) for his amazing tutorials
-educk and h0rn3t for bringing dualboot feature to the i8150! :victory:
-Roderick (Tazerick) for motivating me
-lafactorial for his powerful Khan Kernel!!
-hurtsky for the rock solid HurtSky kernel!
-sir mordred for bringing TRIM to the ol' i8150 (perfectly working with dualboot)
P.S. If any user wants to have his custom kernel work with dualboot, please give the name of the kernel, the kernel version, the linux version and a link to download the kernel, and post what ROM the kernel works with (e.g. xxx kernel version x.xx.xx working with CyanogenMod X.X) and I will do my best in making the kernel work with dualboot.
I AM responsible for any damage that may happen to your device. I do not own any of the kernels or ROMs or apps that have been used to make this project possible. If any user encounters an issue, kindly report the issue and post exactly what your steps are. The guide posted here is the same as educk mentioned but maybe more simplified. I do not deserve any credit, I only made the kernels dualboot compatible but I didn't build these kernels. The kernels posted are the default kernels of the ROMs (simply extracted the boot.img only). Good luck to everyone
Download links:
- https://drive.google.com/file/d/0BxQMaqAowdtsYkl4WnItQ3dfbDA/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsRDFmTjRBaGdJU1U/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsRW1HNlQzQjJ1QkU/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsWk5EVVF5VlM1ZUU/edit?usp=sharing
If any link doesn't work, I will add mirrors
XDA:DevDB Information
Ancora DualBoot, Kernel for the Samsung Galaxy W I8150
Contributors
Paul_Kolanjian, arco68, educk, h0rn3t, arsradu, Madridii, theloneseeker, lafactorial, hurtsky
Kernel Special Features: Dualboot + All awesome kernel features made by the respective developers
Version Information
Status: Testing
Created 2014-04-23
Last Updated 2014-08-21

More kernels support
Added CyanogenMod 10.2 and 11 ION kernels linux 3.4.86 dualboot from Mr. Radu's kernel collection
Added KhaN Kernel 3.4.87 [362 MB] dualboot. Big thanks to the one and only lafactorial!!
Added HurtSky Kernel v1.3. A warm thank you for the senior member hurtsky for his kernel
Added CyanogenMod 10.1 Beta 4 Linux kernel 3.4.89.
Added CyanogenMod 10.2 Linux kernel 3.4.89.
Added CyanogenMod 11 Linux kernel 3.4.91 which is for latest CyanogenMod 11 built by Mr. Arne on 21st of May.
Added HurtSky kernel v1.5 Linux kernel 3.4.90 and HurtSKy kernel v1.5.1 Linux kernel 3.4.91.
Added CyanogenMod 11 kernel based on 25th of May build by Mr. Arne.
Added KhaN Kernel Linux 3.4.91 [360 MB] with TRIM support. Thank you sir mordred for all your wonderful effort and lafactorial for updating your kernel with a blazing update!
Added CyanogenMod 11 Linux kernel 3.4.100 from the 1st of August build of Mr. Arne
Added Hurtsky Kernel v2.6 Linux 3.4.101
Added K^Kernel v1.5 Linux Kernel 3.4.101 416 MB thanks to the best of the best XDA Recognized Developer Christopher83
Download links:
- CM 10.2 Linux 3.4.86 https://drive.google.com/file/d/0BxQMaqAowdtsWmRnc1NrVzEwRlU/edit?usp=sharing
- CM 11 Linux 3.4.86 https://drive.google.com/file/d/0BxQMaqAowdtsY0l0TG1TX3UyQk0/edit?usp=sharing
- CM 11 KhaN Kernel Linux 3.4.87 https://drive.google.com/file/d/0BxQMaqAowdtsYkszS2xuTnR4Rzg/edit?usp=sharing
- HurtSky Kernel Linux 3.4.83 https://drive.google.com/file/d/0BxQMaqAowdtsYXExamtWbEdXRVE/edit?usp=sharing
- CM 10.1 Beta 4 https://drive.google.com/file/d/0BxQMaqAowdtsUDl5RktlODdOcU0/edit?usp=sharing
- CM 10.2 Alpha 7 https://drive.google.com/file/d/0BxQMaqAowdtsNkxqR0dQTWd2MGM/edit?usp=sharing
- CM 11 21st of May https://drive.google.com/file/d/0BxQMaqAowdtsY0x2UXF2cUhkY28/edit?usp=sharing
- Hurtsky kernel v1.5.1 https://drive.google.com/file/d/0BxQMaqAowdtscUIxRkdxX2FPQ3M/edit?usp=sharing
- Hurtsky kernel v1.5 https://drive.google.com/file/d/0BxQMaqAowdtsUXA1dVJ4d2Jfc3M/edit?usp=sharing
- CM 11 25th of May https://drive.google.com/file/d/0BxQMaqAowdtsRC1mNVNTaDI0QkU/edit?usp=sharing
- CM 11 TRIM Kernel (based on KhaN Kernel) https://drive.google.com/file/d/0BxQMaqAowdtsVWtvTUpySTV4bDQ/edit?usp=sharing
- CM 11 1st of August https://drive.google.com/file/d/0BxQMaqAowdtsZ09XMEtxYmZYV28/edit?usp=sharing
- Hurtsky kernel v2.6 https://drive.google.com/file/d/0BxQMaqAowdtsdmxJcFRNZXdKQVE/edit?usp=sharing
- K^Kernel v1.5 416 MB https://drive.google.com/file/d/0BxQMaqAowdtsWW42ZVpKaUtOM0U/edit?usp=sharing
***UPDATE***: Thanks to @theloneseeker for pointing it out, the new kernels are compiled with the extra lib files included inside. Install them using the same procedure above, happy dualbooting!!

yaay I'm in credits Great job man!

Paul_Kolanjian said:
Added CyanogenMod 10.2 and 11 ION kernels linux 3.4.86 dualboot from Mr. Radu's kernel collection
Added KhaN Kernel 3.4.87 [362 MB] dualboot. Big thanks to the one and only lafactorial!!
Download links:
- https://drive.google.com/file/d/0BxQMaqAowdtsOEJoeVgzMmQ1c1U/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsTUxhYWZPU1pUM2c/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsVERPVkxjNFVXaVk/edit?usp=sharing
The new kernels require lib files in addition to the boot2.img, so I included the files with them. All you have to do is put all the files together in the sub-folder of your kernel for example Dualboot/4.3.1/**put boot2.img and all other .ko files here**
Click to expand...
Click to collapse
Awesome thread and great work buddy..

nice work
thanks for this awesome work you saved me a lot of work, time & trouble
by the way I'm creating a dualboot super thread with all info about dual booting
a tutorial created by me and links to all threads about it
the ion problem was a major bummer but now we are good to go

Thanks man! :good: a question: can i use a ICS ROM as primary ROM, like it was with the dualboot by educk?
Edit: and the dualboot can affect performances/battery life?
Inviato dal mio GT-I8150 utilizzando Tapatalk

Very Important Note for 4.4.2 dualbooters
micnicmic said:
Thanks man! :good: a question: can i use a ICS ROM as primary ROM, like it was with the dualboot by educk?
Edit: and the dualboot can affect performances/battery life?
Inviato dal mio GT-I8150 utilizzando Tapatalk
Click to expand...
Click to collapse
Sure you can my friend, the primary ROM can be any Android ROM even Gingerbread, but the secondary ROM must be Jellybean and upward (tried making Gingerbread kernel dualboot compatible but it soft-bricked my phone). I repeat, this is the same procedure as educk and h0rn3t posted and all I did is add kernels to make ION kernels compatible to feed my dualboot hunger and the others as well
As for the performance and battery life, dualboot has nothing to do with it, instead, the ROM and kernel you use (on the primary and secondary partitions) are what determines the performance, e.g. if you use CM9 with hurtsky kernel on primary ROM and CM11 with stock kernel on secondary ROM, it's the same as saying you are 100% using CM9 on primary and similarly for CM11 and dualboot has no effect whatsoever on your combination, in other simplified words, dualboot for ancora by educk and h0rn3t is amazing (better than the one I have on i9100) since it creates two phones in one, so performance is based on what you are using.
***IMPORTANT NOTE*** After some testing, I realized that two custom kernels on primary and secondary Kitkat ROMs breaks the secondary ROM's WiFi and GPS, so if you are using CM11 with Khan Kernel on primary, and any other 4.4.2 ROM with hurtsky or khan kernel as well on secondary ROM for example, you will not be able to use WiFi and GPS whereas primary ROM remains unaffected, and the battery life and performance on secondary ROM are unaffected and the same as using it as primary ROM. The same happens if you use the same custom kernel on primary and secondary ROMs. So if anyone dualboots two 4.4.2 ROMs like me, use custom kernel on primary ROM and stock ROM kernel of the ROM you're using (download links are in first post). This has been tested on Android Kitkat so I don't know the consequences of two custom kernels on Jellybean. Just wanted to add this as a "Heads-up" so no one spams the threads of CM11 or any other thread accidentally. Good luck to all fellow dualbooters!!!

Will you make new cm11 kernel ready for dual boot?
Inviato dal mio GT-I8150 utilizzando Tapatalk

micnicmic said:
Will you make new cm11 kernel ready for dual boot?
Inviato dal mio GT-I8150 utilizzando Tapatalk
Click to expand...
Click to collapse
Of course I will my dear brother , all you have to do is ask and I'll supply you with a big number of kernels! I honestly stopped updating the thread since I believe that adding kernels just it would not interest users, but it's about time I release updated kernels. Feel free to post any kernel you want for any ROM, and I'll add it for you and everyone once it's done. By the time you read this post, I'll be adding new kernels in the second post, and I come with excellent news about the KitKat dualboot issue mentioned up there in the sixth post.
In order to fix the issue that persists upon dualbooting two KitKat 4.4.2 ROMs (in which using a custom kernel instead of the original ROM's kernel on the secondary ROM is breaking the secondary ROM's WiFi and GPS), the solution is quite simple. As I previously said, the primary ROM, no matter what kernel you use, is not affected. So, here it goes. Let's assume you want to install the latest CyanogenMod 11 build by Mr. Arne which was built on the 21st of May, and you decided to install the ROM on the secondary partition, but you want to install the latest HurtSky kernel with the build, yet, you know that custom kernels are breaking some essential components on the secondary ROM (In fact, this happens with any ROM other than KitKat if you use a custom kernel, and the fix works for any Android version). All you have to do is download the latest HurtSky kernel .zip file, extract the "system" file included with the kernel (there is META-INF folder, system folder, and boot.img, but we only need the system folder). Open the CyanogenMod-11.zip you want to install using WinRAR or WinZip or 7zip (basically any archiver should work), you will also see the same folders, but you need to navigate to /system/lib/modules and you will see some .so files (about 6), so delete them all. Replace these files with the .so files we extracted from the HurtSky kernel we downloaded (remember the extracted "system" folder from HurtSky's kernel) and once all the files are in place, your CM 11 ROM is ready for dualboot BUT ONLY to be used with the HurtSky custom kernel. IF you want to use another kernel, or maybe the default one, do the same steps as above and WiFi won't be affected anymore. Here is a listed summary:
1- Download the ROM.zip you want, open it and navigate to system/lib/modules.
2- Delete all the .so files found in the /system/lib/modules folder (only the files that look the same in the kernel's /system's folder)
3- Download any custom kernel you like to use in the secondary ROM, open it, and extract the "system" folder.
4- Add the .so files in the extracted 'system" folder from the kernel to your ROM.zip in /system/lib/modules.
5- You now have a dualboot-ready ROM to be used with the specific custom kernel you chose. (always make a NAndorid Backup just in case)
If anyone faces any issue or wants to have a new kernel, I am more than happy to help, give solutions, and add up some more kernels. As I said, I will be always testing dualboot to find any issues and reproduce them in order to be fixed. I always dualboot two 4.4.2 ROMs (currently on Paranoid Android by my brother Osama, and the latest CyanogenMod 11 build by Mr. Arne). Have any request? Need some help? Don't be shy to ask! Good luck to everyone!

:good: really thanks for all your work, I really appreciate this dual boot feature
Inviato dal mio GT-I8150 utilizzando Tapatalk

Hey! Will you make the new kernels ready for dualbooting? Thanks in advance!

[ROM][P900][UNOFFICIAL] CyanogenMod 11 | 20150209

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and install a compatible recovery
3. Wipe data & cache partitions and flash firmware
4. Optional: install the Google Apps additional package
Known Issues
Everything shoud work
History
19: New cm build 20150209: latest code + fix keyboard height
18: New cm build 20141124
17: New cm build 20141104: latest code + allow physical keyboards fix + enable xpad in kernel
16: New cm build 20141031
15: New cm build 20141027
14: New cm build 20141025
13: New cm build 20141022
12: Back old boot from bonuzzz (freezes with native cm).
11: Fix virbate (big thanks for bonuzzz) - CyanogenMod 20141015.
10: Finally we (I and bonuzzz) made it. CyanogenMod 20141014, fully builded from sources, no more ports.
9: Merge with original CyanogenMod 20141010 + latest kernel from bonuzzz (cover now working, all working)
8: Merge with original CyanogenMod 20141008 SNAPSHOT-M11
7: Merge with original CyanogenMod 20141007 + back SPen functionality
6: Item 5 + bluetooth fix - finally it's fully work
5: Merge with original CyanogenMod 20141004 - lcd density changed from 320 to 270 - it's look more frendly.
You can play with density - edit ro.sf.lcd_density value in systembuild.prop
In stock - 320,
Now - 270,
Phisicaly - it's about 248, but it's too small to me
See attached screenshots with diff density.
4: Merge with original CyanogenMod 20141003
3: V2: MTP fix - big thanks for bonuzzz, he made new kernel with mtp fix
2: V1: Fix SPen in vertical mode
1: V0: initial version
Links
CyanogenMod Build:
19: New cm build 20150209: https://drive.google.com/file/d/0B-6nm7Jks0W5R2NVanBKTkZlcDA/view?usp=sharing
18: New cm build 20141124: https://drive.google.com/file/d/0B-6nm7Jks0W5QVRzQnBEaFZLRm8/view?usp=sharing
17: New cm build 20141104: https://drive.google.com/file/d/0B-6nm7Jks0W5TW4xTlhIR0RkTFE/view?usp=sharing
16: New cm build 20141031: https://drive.google.com/file/d/0B-6nm7Jks0W5eFFhSmhZTzBGODA/view?usp=sharing
15: New cm build 20141027: https://drive.google.com/file/d/0B-6nm7Jks0W5Vk5KcW9sU1RpM0k/view?usp=sharing
14: New cm build 20141025: https://drive.google.com/file/d/0B-6nm7Jks0W5a1JXczYxNDJ5RzA/view?usp=sharing
13: New cm build 20141022: https://drive.google.com/file/d/0B-6nm7Jks0W5QUtKLXFpRWxSVkU/view?usp=sharing
12: Back old boot from bonuzzz (freezes with native cm): https://drive.google.com/file/d/0B-6nm7Jks0W5NHktYUROOTVSNFU/view?usp=sharing
11: Fix vibrate - CyanogenMod 20141015: https://drive.google.com/file/d/0B-6nm7Jks0W5QU0wUHpNUGJqdk0/view?usp=sharing
10: CyanogenMod from sources (require full wipes): https://drive.google.com/file/d/0B-6nm7Jks0W5Z25IWDZCeFBudlE/view?usp=sharing
CyanogenMod Port:
9: Merge with original CyanogenMod 20141010: https://drive.google.com/file/d/0B-6nm7Jks0W5OElZRmRGLTluYms/view?usp=sharing
8: Merge with original CyanogenMod 20141008 SNAPSHOT-M11: https://drive.google.com/file/d/0B-6nm7Jks0W5blpPRVFpX1hNNzg/view?usp=sharing
7: Merge with original CyanogenMod 20141007: https://drive.google.com/file/d/0B-6nm7Jks0W5WGJYUFd1dWF5emc/view?usp=sharing (link updated)
6: Merge with original CyanogenMod 20141004 with bluetooth fix: https://drive.google.com/file/d/0B-6nm7Jks0W5d2l2LW56QlV0LXM/view?usp=sharing
5: Merge with original CyanogenMod 20141004: https://drive.google.com/file/d/0B-6nm7Jks0W5OVYxU1Z1NWtKRms/view?usp=sharing
4: Merge with original CyanogenMod 20141003: https://drive.google.com/file/d/0B-6nm7Jks0W5OGpYb21SZEZWd28/view?usp=sharing
3: V2: https://drive.google.com/file/d/0B-6nm7Jks0W5NmY5V29PNVFadm8/edit?usp=sharing
2: V1: https://drive.google.com/file/d/0B-6nm7Jks0W5aE1sa0NfVDdXa28/edit?usp=sharing
1: V0: https://drive.google.com/file/d/0B-6nm7Jks0W5dUlTc3lfLWtTaUk/edit?usp=sharing
Google Apps additional package
(use latest kk gapps: gapps-kk-20140606-signed.zip): http://goo.im/gapps
or (set of packages - full, mini, micro, nano): http://forum.xda-developers.com/showthread.php?t=2397942
TWRP:
http://forum.xda-developers.com/showthread.php?t=2706982
Kernel:
Kernel with enable VT (big thanks for bonuzzz) : https://drive.google.com/file/d/0B-6nm7Jks0W5VldRNGdqYld3TEE/view?usp=sharing
Sources:
device
kernel config for P900
kernel for exynos 5420
vendor
Thanks
Thanks to CyanogenMod team and special thank to crpalmer, his hard work on fix all problems for original SM-T520 finally allow create the port for SM-P900.
Special thank for bonuzzz.
Additional:
Multi-Windows:
1. Install Xposed framework: download apk from http://forum.xda-developers.com/xpos...gelog-t2714053
run apk, launch it, go to framework and press installupdate, then reboot. Alow root if ask.
2. Install XHaloFloatingWindow module: open Xposed framework, go to download section and search XHaloFloatingWindow (just type Halo), open XHaloFloatingWindow, swipe to left - and press download on latest version
3. Activate XHaloFloatingWindow module: open Xposed framework, go to Modules and check XHaloFloatingWindow, then reboot. Allow root if ask.
4. Open XHaloFloatingWindow - you can leave all by default, but:
- Popup WindowPopup Dim set to 0
- Popup Behavior - check "Force New Windows in Halo"
5. Install MultiWindow Sidebar: download apk from http://forum.xda-developers.com/show....php?t=2729450
6. run MultiWindow Sidebar:
- Check "Start on Boot"
- In "Select Apps" - add your apps
- In "Drag Launch Mode": select ParanoidAndroid Halo
- In "Tap Launch Mode": selecrt ParanoidAndroid Halo
then reboot and enjoy.
It's a bit buggy in rotate, but it's work.
S-Pen:
CM S Pen Add-on: https://play.google.com/store/apps/details?id=com.tushar.cmspen
Note Buddy: https://play.google.com/store/apps/details?id=com.tushar.spen_helper
INKredible - Handwriting Note: https://play.google.com/store/apps/details?id=com.viettran.INKredible
XDA:DevDB Information
CyanogenMod 11, ROM for the SM-P900, ROM for the Samsung Galaxy Note Pro 12.2
Contributors
Valera1978, bonuzzz, arcadia2uk
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20141104
Stable Release Date: 2014-11-04
Created 2014-11-05
Last Updated 2014-11-05

Finally, thank you so much.
Do we need to update to latest TWRP or should 2.7.1.0 work? Had issues on other devices using ver 2.8.0.0.
** After testing everything works fine, great work !!!

I'm on 2.8.0.0 - it's working correct for me. But it also should work on 2.7.1.0.

Valera1978 said:
This port based on official CyanogenMod for SM-T520 (http://download.cyanogenmod.org/?device=picassowifi)
It's for SM-P900 (Exynos) only.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and install a compatible recovery
3. Wipe data & cache partitions and flash firmware
4. Optional: install the Google Apps additional package
Known Issues
1. MTP
Links
CyanogenMod Port: https://drive.google.com/file/d/0B-6nm7Jks0W5dUlTc3lfLWtTaUk/edit?usp=sharing
Google Apps additional package (use latest kk gapps): http://goo.im/gapps
TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Thanks
Thanks to CyanogenMod team and special thank to crpalmer, his hard work on fix all problems for original SM-T520 finally allow create the port for SM-P900.
Click to expand...
Click to collapse
cool...
does it keeps the s-pen ability ?

snir2 said:
cool...
does it keeps the s-pen ability ?
Click to expand...
Click to collapse
pen works but no pointer on screen.
Also having trouble mounting device on my laptop.

Yes, pen working - i checked in INKredible, button work too.
Mounting on pc - trying fix it.

nice to see CM coming.. been a while since been able to use em
From my Fired-up Note Pro 12.2!

Sweet! I sort of feel like this tablet has now arrived If possible, could someone who has it up and running give us a quick overview of things like spped, responsiveness, battery etc?

I just flashed this ROM it is running very smooth I am running it with art and nova launcher and very impressed so far, I can't comment on battery yet will test it out tomorrow I have been waiting a very long time for a cm11 ROM for this tablet and would also really like to see a slim or carbon ROM as well

Update header: add V1 version - now SPen working correct in vertical mode.

Hi, thank you for this ROM. Is app to sd working?

Now there is a chance to actually use it. I ll wait for the mtp to get fixed though. Thanks!

First of all, thank you for the port.
Installed V1, full wipe using TWRP 2.8.0.0
Everything seems to be working fine so far. The only issue I'm concerned about is how the Interactive governor is tuned. The CPU spends most of it's time pegged at 1900MHz across all four cores even when just scrolling through Facebook or Chrome. Changing the governor to Ondemand makes it behave much better. Battery life would be an issue on Interactive.
Edit: also, on first boot I couldn't see my 5GHz access points. Changed the WiFi Region code in settings to my country (Canada), rebooted and could now see/connect to 5GHz channels.
I've only been running it for a couple hours, so I'll give more feedback as I get more data.

New V2 version: mtp fixed.

Noooooooooo
I want it but i have p905
Inviato dal mio SM-P905 utilizzando Tapatalk

Hi Valera1978,
This is not for my device, mine is a 905, but thanks for bringing some movement to this forum and of course, thanks for your hard work supporting this tablet. I believe some more months and we'll see more ROMs posted here.
Sent from my GT-N7100 using XDA Premium 4 mobile app

Dirty flashed V2. Can confirm MTP working with Win8.1 (only internal storage mounts, but not external sdcard)

Works really well, nice and smooth. I'm surprised to see such a great ROM, thanks.

Ahh! Finally some movement on this device! I will flash this as soon as i get up tomorrow and post some feedback.:good:

This Rom is huge, after testing 2 days, I can say it s fast,smooth,better battery life,even gaming performance is better than Samsung stock crap installation.And look.... we got more free space.I kinda miss the pointer under the pen but that just a matter of time . Great work.

(CM13.0)(LTE)(UBERTC)Logix 04/12/16

Welcome to my little Rom I noticed a lack of LTE roms that worked on xda for hte nexus 9 so I made this for you guys
Stripped down and minimal CM with latest ubertc 6.0/4.9 full LTE/WIFI Support
Instructions
make sure your on latest bootloader & recovery :here/here
full wipe
flash vendor img if your not on MMB29R vendor : here
flash rom :here
flash fire-ice kernel the cmm version(and say thanks) :here
flash latest su: here
flash opengapps (arm64) here
reboot
I work for T-mobile so my time is very limited but im going to try to update each time a new vendor comes out:good:
shout out to usb-host for being a |30$$ and making the nexus 9 great!
i only support fire-ice kernel with my rom !!!

mine
ChangeLog
build 4/12/16
vendor MMB29R
Initial device files bring up
removed some fm radio files from cm (we dont have a fm radio)
removed stock lwp
removed cm reporting
removed cm ota
introduced latest ubertc
removed inline kernel and apps below (some people didnt want )
ran out of time/booze
The apps I like to use /mods i do to stock are as follows:
Busybox : https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
Adaway: http://adaway.org
Kernel auditor: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
LMT (pie launcher) :http://forum.xda-developers.com/showthread.php?t=1330150
liveboot (verbose boot):https://play.google.com/store/apps/details?id=eu.chainfire.liveboot&hl=en
People keep asking me how to get my custom pie launcher and what my theme is
I simply just disabled my nav bar by adding "qemu.hw.mainkeys=1 "
to my build.prop you can use this app
im using this theme for black and red and matched the colors in the settings of LMT and positioned pie to launch from the bottom
any questions just let me know and please try to provide a logcat! Thanks for testing :highfive: