Nexus 5 Car Mount Thread - Nexus 5 Accessories

How do you mount nexus 5 in your car. Post!
I'm using this: a 2 in one mount.It's an aged mount for my old s3, but it also fits new nexus 5 perfectly.
I have used this a number of times now. It holds the phone very solid.
http://www.wowparts.com/new-univers...4s-samsung-i9300-note-2-n7100-blackberry-z10/
http://forum.xda-developers.com/showthread.php?t=2302206

RAM X-Grip

I love my Tetrax FIX. I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.

I usually wait for ProClip to come out with a new phone holder.
http://www.proclipusa.com/

+1 for proclip. I am using the iPhone proclip holder and holds the nexus decent.

omadhaun said:
I love my Tetrax FIX. I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.
Click to expand...
Click to collapse
Problem with these magnet solutions is that they interfere with wireless charging. :crying:

bleuiko said:
Problem with these magnet solutions is that they interfere with wireless charging. :crying:
Click to expand...
Click to collapse
Oh crap, I didn't even think about that! Thanks for pointing that out bleuiko. I've been planning to use both the magnet car dock and the wireless charging, but now I'm going to have to make a decision between the two...

Pro clip. Just waiting on the to make the Nexus 5 dock.

Here's my N4 rig which is not surprisingly also my N5 rig. In my 2006 Mazda 6. Simply blocked the middle vent with a round plastic disc and attached the clip with it's suction cup.
Clip from here: http://www.amazon.com/gp/product/B004M8ST18
Album here: http://imgur.com/a/u1AVO#0

using MONTAR : http://www.amazon.com/WinnerGear-Universal-Smartphones-Windshield-Blackberry/dp/B00BZWW3ES/ref=sr_1_1?ie=UTF8&qid=1383688782&sr=8-1&keywords=montar
or this one for UK :
http://www.amazon.co.uk/Universal-Smartphones-Windshield-Dashboard-Blackberry/dp/B00BZWW3ES/ref=sr_1_1?ie=UTF8&qid=1391757748&sr=8-1&keywords=montar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

omadhaun said:
I love my I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.
Click to expand...
Click to collapse
I have been using Tetrax for years on my iphone and my s4. I use an x-way version so i can landscape the phone easier. main issue issue get getting the dam metal dots to stick to the cases It generally boils down to a good chunk of crazy glue. Main issue is i plan to use wireless charging with it and i don't think having a steel disk glues to back of phone/case most likely will impair that. I was looking at buying an I-bolt.

proclip for sure. that's the only mount that will ever go in my car
*EDIT*
turns out it fits in my Nexus 4 proclip mount... but Google/LG decided to flip the micro USB port so i can't use the same hardwired charging cable (it's a right angle plug) without cutting it open, which i'd rather not do... but it fits, just no charging :-/

Just an fyi, according to the proclip facebook page, a person asked if they would get one for the N5 and they said they had picked up two devices and should have a mount ready in 4-6 weeks. They said updates on the nexus 5 proclip would be available via the facebook page.

I've just received one of these:
http://www.amazon.co.uk/gp/product/B007Y94CPO/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
The quality is great, and because it's universal i won't need to buy a new mount for every new phone in future! The arms are spring loaded and released by a button on the back. Put the phone in, squeeze the arms together and it holds the phone perfectly. There's also a really nice rubber padding on every part that's in contact with the phone.
Most of the Amazon reviews are really positive too. I can't see there being any issues with it even after years of use. It really is a solid product! :good:

I believe the most convenient solution would be to use a Qi car dock: no connection needed and accommodate most cases. I looked around a little but but haven't found many options that look like they wont break down in a year
There is This one
That one (more expensive)
And This incredibly expensive LG official solution. (it got me thinking about making my own...
Any thoughts ? I really don't want to connect and dusconnect usb cables all the time ...

I bought this a while back for my GS4.
Works really well even with my ringke slim on the GS4.
To my surprise, it works with the N5 and without adding the thin metal plate as the N5 has the steel discs already built into it. It's not super strong like using the thin metal plate, but it holds fine.
The material on the mount (on top of the magnets) is also like that of the back of the N5 so it does rotate fairly easily once mounted so maybe in a landscape view, if not centered, it would move some on a bumpy road.

dispatch said:
Here's my N4 rig which is not surprisingly also my N5 rig. In my 2006 Mazda 6. Simply blocked the middle vent with a round plastic disc and attached the clip with it's suction cup.
Clip from here: http://www.amazon.com/gp/product/B004M8ST18
Album here: http://imgur.com/a/u1AVO#0
Click to expand...
Click to collapse
FYI the N5 is polarized differently than the N4. I realized this today driving to work in the SNOW. I can't see the screen at all when the phone is in landscape mode and I'm wearing polarized sunglassses. I don't particularly like portrait in the car, but my tasker/rotate workaround which isn't perfect (for google's RIDICULOUS decision to rip car mode out of android) coupled with the polarization issue will force my hand.
This clip rotates easily, thankfully. I know for many of you charging in the car dock is a must. For me I've learned to live without it.

i use the brodit proclip from my nexus 4 fits perfect

I absolutely love my Kenu Airframe so far. I'll have to see how it works in the winter with hot air from the vent blowing on my Nexus 5.
http://www.kenu.com/products/airframe

I use the Mountek nGroove - goes into the CD slot.
http://www.mountek.com/Mountek-nGroove-Grip-Universal-Smartphones/dp/B004G1L52Q

Related

Evo Car Docks and Home Docks - DON'T BUY CAR DOCK

New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Home docks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Car mount
when someone actually gets one of these home charger/dock combo's and confirms they fit and work, could you please post here, with the link to the one you bought?
so many of these things are junk, and dont fit the phone, that I am afraid to try another one that doesnt work, after getting burned already
thanks
I actually bought a zuuma z4 and took it for a spin this morning. Wow that thing is solid! It stayed put even after a 120 degree turn at 20 mph!
It has an adjustable cradle with soft padding that holds my evo in place and gives it some protection.
I really only have 2 problems with it. It took me a while to figure out how to mount it properly as it comes with no proper instructions. Second, its byoc (bring your own charger).
Great for $30!!!
Sent from my PC36100 using XDA App
zuuma looks very nice...too bad they dont make a home desktop/spare battery charger
I am not buying the home dock, as I don't have a use for it...but I am buying the car mount and will report back how it works. Coming from the other side of the world though, so it will be 10 - 15 days before i report back.
omegatyrant said:
I actually bought a zuuma z4 and took it for a spin this morning. Wow that thing is solid! It stayed put even after a 120 degree turn at 20 mph!
It has an adjustable cradle with soft padding that holds my evo in place and gives it some protection.
I really only have 2 problems with it. It took me a while to figure out how to mount it properly as it comes with no proper instructions. Second, its byoc (bring your own charger).
Great for $30!!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Does the zuuma cover up the camera in the back? I am looking for a good dock so I can video some car racing (autocross).
dxearner said:
Does the zuuma cover up the camera in the back? I am looking for a good dock so I can video some car racing (autocross).
Click to expand...
Click to collapse
if it does, just get the ebay one and drill a nice hole on the holder
They sale a generic universal (rebranded) one at Wal-Mart that clamps on to the phone with thick foam padding. It's pretty stable and clips securely into the vents (or screws in / etc). It's like $9.99. Best of all, you don't have to remove your protective case to use it, since it adjusts with a button.
Food for thought.
jedwardmiller said:
New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Home docks
Car mount
Click to expand...
Click to collapse
I wonder if it'll still fit if your phone has a case on. If not, that's a deal breaker.
New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Click to expand...
Click to collapse
If Car Mount is specifically made for EVO, why in the description does it say "Suction cup with lock clip to ensure your iphone 4 remains in place"
Same crap Products with different labeling
I just got my ebay order. This is the second item l got from the same seller. Unfortunately, the dock was shipped with no protective packaging, and part of the suction cup was broken. I'm hoping to get a replacement. There is a hole in the holder for the camera. Looks like the box was opened by customs, or was shipped broken because the broken piece was missing upon receipt. The holder is tight-fitting, and has 4 locking slots similar to my magellan dock. Build quality is ok for 6 bucks, but I doubt one would be able too fit an evo with a case in the holder. I have a zaggskin on mine. I previously purchased the battery charger and 2 batteries from this vendor.
Sent from my PC36100 using XDA App
I received the car dock today and it works pretty well. There is a cutout for the camera, has to holders on the bottom (or side if you leave in portrait) and a flexible clip on the top. Has the universal 4 peg holder and the large middle so if you don't like their holder or need one with a longer neck you can get one. I have not tried it in the car as of this writing, only in the house to try out the fit. It is perfect without a case - with my "Barely There" case it fits, but no quite right. I will post pictures very soon so all can see what I mean.
Easy enough...
Don't bother with this one. The fit on the car dock is tight...too tight. Left small, very tough to see, scratches. You may not notice, but I did and I am not happy with this one.
Not worth the few bucks it cost.
DealExtreme just got it in for a little cheaper. They are good with refunding your money too when it comes to problems.
http://www.dealextreme.com/details.dx/sku.40745
Does anyone know if the dealextreme or ebay car holder will work if you have an extended battery with a larger back panel?? I ordered the extended 3000 mah battery off eBay.
Also, I just wanted to point out that the eBay car dock and the deal extreme one are definitely different.
I got the car dock and I really like it. It's a snug fit but the Evo pops in and out easily enough (I did not get any scratches on it). The Evo is held very securely and does not vibrate while the car is moving. There is maximum up/down and left/right adjustment and when the best postion is found you lock it in with two big hand screws. Overall I'm very satisfied.
Still_Waters_43 said:
I got the car dock and I really like it. It's a snug fit but the Evo pops in and out easily enough (I did not get any scratches on it). The Evo is held very securely and does not vibrate while the car is moving. There is maximum up/down and left/right adjustment and when the best postion is found you lock it in with two big hand screws. Overall I'm very satisfied.
Click to expand...
Click to collapse
You forgot to tell us which one you got!! There have been a few mentioned. And can it be used with a case?

Best Car Mount?

I am looking to spend anywhere from 15 to 40$ on a good car mount, preferably a windshield suction cup mount. I found this one from an add while making this thread rofl:
http://www.extremepda.com/HTCEVO-SM420.html
Anyone ever tried this? or does anyone have a good recommendation on a good car mount to buy?
I LOVE android GPS navigation, its just a pain holding the phone and driving.
Thanks,
Daugusta
I use this Arkon windshield suction mount instead of the gooseneck one you linked to:
http://www.amazon.com/Arkon-Windshield-Mount-Universal-Smartphone/dp/B000N7DUJS/ref=sr_1_13?ie=UTF8&s=wireless&qid=1283530641&sr=8-13
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one is solid. I can't say for sure, but I'm guessing the one I have is less prone to bouncing around while the car is moving, compared to the gooseneck version you linked to. The only advantage of the gooseneck could be that it is longer - but again that would, at the same time, likely be a bad thing if it bounces around more while the car is moving.
Deal Extreme has one for $5.50 with free shipping. I like it a lot. It's made for the Evo and is a really snug fit. Battery door has snagged a few times, but it doesn't pop off, just takes extra effort to remove when that happens.
dealextreme.com/ details.dx/sku.40745
the.joeba said:
Deal Extreme has one for $5.50 with free shipping. I like it a lot. It's made for the Evo and is a really snug fit. Battery door has snagged a few times, but it doesn't pop off, just takes extra effort to remove when that happens.
dealextreme.com/ details.dx/sku.40745
Click to expand...
Click to collapse
Just bought this, for 5$ i could not resist, cant wait till it gets here. Thanks for the recommendation.
Cheers,
Daugusta
I want to get ProClip's EVO 4G dock:
http://www.proclipusa.com/brodit-de...t)/holder-with-tilt-swivel--511176-18252.aspx
http://www.proclipusa.com/brodit-de...-cigarette-lighter-adapter--512176-18252.aspx
http://www.proclipusa.com/brodit-de...ord-for-fixed-installation--513176-18252.aspx
But now that Sprint/HTC has their customized one, now I'm not too sure. My car (Mini Cooper) doesn't have anything flat to suction Sprint/HTC's holder (except for the windshield), but ProClip has a mount that can fit a few places that the suction can't and vice-versa. The suction one has a nice cable/power management.
Adding Scosche (http://www.cellularaccessory.com/btaxs.html) wireless bluetooth audio connector to my car's AUX line would be the wiring icing on the cake.
I got the Pro Clip with the adjustable holder. I actually really, really like it. The fit in my f150 is perfect, and it sits in place that is perfect. Its sturdier than any vent/suction mount ive ever used before, and it looks really nice.
Plus, with it being the adjustable holder, it works with my case on. Not only that, if I ever get a different case, I know it will work with whatever case I ever get. This is a nice little feature. Id say if youre looking for something not suction cup, look into the pro clip options.
I will say that if youre looking for something with a charging option maybe the pro clip isnt for you, however take into account where your cigarette lighter/power thingamabob is. In my truck its almost directly beneath where the mount sits, so running a charger up to it when needed isnt an issue, and isnt an eyesore.
Beware of this: http://shop.brando.com/htc-evo-4g-windshield-holder_p04741c0309d060.html
I bought one, left it in my car on the windshield for one day (wasn't even too hot) and the plastic is all warped around the suction cup and it refuses to stick to the windshield, and also scraped up the side of my EVO (the clips are too firm, and crush the phone).
Guess it's a good thing it broke, and was only $15 with shipping.
Tertrax XWAY. Pure awesome.
http://www.youtube.com/watch?v=lPqP3byMv1Q
Does the Tetrax interfere with the Magnetic sensor for GPS and the compass apps?
ghostyroasty said:
Does the Tetrax interfere with the Magnetic sensor for GPS and the compass apps?
Click to expand...
Click to collapse
The GPS no, the compass yes.
Well there goes that option... I was going to put the magnet on the back of my case... I wonder if it would make a difference? With actually allowing the compass to work. I have one of the newer hybrid cases.
No need to make it complicated, nor expensive. The wave of mounts is flooding eBay, for as little as five bucks. This holder fits the (naked) Evo perfectly, is sold with vent, suction cup, or flex-arm mounts, and the holder itself has slots that will accomodate hundreds of the other universal mounts, like the ones you probably already have three of.
http://cgi.ebay.com/Car-Windshield-...866620?pt=PDA_Accessories&hash=item4aa486a1fc
And, unlike the seventy (!) dollar HTC mount, this one didn't forget the phone has a big ol' camera lens on the back of it.
If you have a case that's too much bother to do the in-and-out with, look at the GPS mounts that clamp.
Golf Nut said:
I use this Arkon windshield suction mount instead of the gooseneck one you linked to:
[Can't post links cause I'm still new :-(]
This one is solid. I can't say for sure, but I'm guessing the one I have is less prone to bouncing around while the car is moving, compared to the gooseneck version you linked to. The only advantage of the gooseneck could be that it is longer - but again that would, at the same time, likely be a bad thing if it bounces around more while the car is moving.
Click to expand...
Click to collapse
Got that and the popular motorola micro-usb charger both on amazon. The total was $21. I love that it's quick to put the phone in and release. Plus it's not a snap-in type system so there's no wear and tear on the phone. The soft foam sides and bottom are a plus too. Only thing is the vent mount is pretty flimsy but it probably depends on the vents of the car. For me it was just hanging there and I knew on bumps it'll fly up and down.

Pleomax Car Mount review

Couldn't see many comments about the Pleomax car mount in this forum so I thought I'd give some feedback because it's fantastic!!!
Official page (took me a while to navigate the korean to find it lol). Not sure if this is the exact same model as the width dimensions are slightly different, but the illustrations are still useful.
http://www.pleomax.co.kr/service/pr...2&SearchData=&SearchPageSize=9&oidProduct=432
Positives:
- Suction is really strong and stable. It has a simple switch mechanism that helps the suction cup grip strongly. At first I was baffled because it wasn't sticking, but then I realised I hadn't taken off the plastic protector that was attached to the suction cup lol.
- Overall build quality is great. All functions work perfectly. Rotates 360 degrees yet sticks in position nice and firm.
- Works with a range of phone sizes (Not sure the exact range - SGS1 and 2 work fine. I'm not sure about the note - but I saw another pleomax dock on ebay that said note2 on it - not sure if it's the same dock or a slightly bigger.version).
Negatives:
- Not solely tailored for the SGS3 (although I'm certain they tested/designed it with the S3 in mind)- the grip prongs are a generic/flexible fit which means the phone probably doesn't slide in a smoothly/easily as a set i9300 dock. However, once it's in it is very snug and well fitted.
- No frills product. It's just a dock - no electronics (usb audio) or anything. However, this probably isn't a negative for most people - this is the type of dock I wanted (it is very easy to get a usb cable or nfc tag to put phone into car mode or output usb audio).
Overall:
Best dock I've ever used (well.. I previously only had an awful generic one from dealextreme lol.)
Pleomax is a Samsung subsidiary/brand (http://en.wikipedia.org/wiki/Pleomax). The Box is branded with "Pleomax" and "Samsung C&T" and lives up to the Samsung quality we are used to .
I bought it off this seller http://www.ebay.com.au/itm/ORIGINAL...es&hash=item1c2690c4ce&_uhb=1#ht_12286wt_1159
The price at $20 is not cheap, but compared to the cost of most other docks I consider it quite reasonable (especially for a samsung product).
oswade said:
Couldn't see many comments about the Pleomax car mount in this forum so I thought I'd give some feedback because it's fantastic!!!
Official page (took me a while to navigate the korean to find it lol). Not sure if this is the exact same model as the width dimensions are slightly different, but the illustrations are still useful.
http://www.pleomax.co.kr/service/pr...2&SearchData=&SearchPageSize=9&oidProduct=432
Positives:
- Suction is really strong and stable. It has a simple switch mechanism that helps the suction cup grip strongly. At first I was baffled because it wasn't sticking, but then I realised I hadn't taken off the plastic protector that was attached to the suction cup lol.
- Overall build quality is great. All functions work perfectly. Rotates 360 degrees yet sticks in position nice and firm.
- Works with a range of phone sizes (Not sure the exact range - SGS1 and 2 work fine. I'm not sure about the note - but I saw another pleomax dock on ebay that said note2 on it - not sure if it's the same dock or a slightly bigger.version).
Negatives:
- Not solely tailored for the SGS3 (although I'm certain they tested/designed it with the S3 in mind)- the grip prongs are a generic/flexible fit which means the phone probably doesn't slide in a smoothly/easily as a set i9300 dock. However, once it's in it is very snug and well fitted.
- No frills product. It's just a dock - no electronics (usb audio) or anything. However, this probably isn't a negative for most people - this is the type of dock I wanted (it is very easy to get a usb cable or nfc tag to put phone into car mode or output usb audio).
Overall:
Best dock I've ever used (well.. I previously only had an awful generic one from dealextreme lol.)
Pleomax is a Samsung subsidiary/brand (http://en.wikipedia.org/wiki/Pleomax). The Box is branded with "Pleomax" and "Samsung C&T" and lives up to the Samsung quality we are used to .
I bought it off this seller http://www.ebay.com.au/itm/ORIGINAL...es&hash=item1c2690c4ce&_uhb=1#ht_12286wt_1159
The price at $20 is not cheap, but compared to the cost of most other docks I consider it quite reasonable (especially for a samsung product).
Click to expand...
Click to collapse
I bought this late last year, while it does work well for most smartphones, it is NOT in any way durable. Just wait till summer comes, those arms will break like twigs when you go to put the phone into it, I had two so far since the retailer sent me one free of charge because of it breaking. It broke using the Galaxy Nexus (without a case on I might add)
also I wish people would stop calling these "MOUNTS" a dock, a dock is something you insert the device into to add functionality. A mount is something that holds something.
ultrajam said:
doesn't look pretty cool... I think you can find something more fittable and with better construction...
Click to expand...
Click to collapse
The new iBolt xPro car dock is pretty much a universal solution that also charges.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had some eBay bucks leftover so I found the All Fit 3 and ordered it for a total cost of $4.32. Hopefully my experience will mirror the OP's.
gtrslngrchris said:
I had some eBay bucks leftover so I found the All Fit 3 and ordered it for a total cost of $4.32. Hopefully my experience will mirror the OP's.
Click to expand...
Click to collapse
Did it?
nniicckkss said:
Did it?
Click to expand...
Click to collapse
Took it awhile to get here so I kind of forgot about this thread. I'm quite happy with the mount overall, very sturdy and well built and holds the phone very strongly while easy to get it in and out. You'll need to buy your own adhesive though to mount it to the dash most likely since it doesn't like to stick to 2 out of my 3 car dashboards by itself.
gtrslngrchris said:
Took it awhile to get here so I kind of forgot about this thread. I'm quite happy with the mount overall, very sturdy and well built and holds the phone very strongly while easy to get it in and out. You'll need to buy your own adhesive though to mount it to the dash most likely since it doesn't like to stick to 2 out of my 3 car dashboards by itself.
Click to expand...
Click to collapse
Thank you, I've just ordered it (the '3'), for my S4, I'll have to wait some time for delivery too though. I got the twin 2 amp charger from the same manufacturer too.
Cheers!
Looks not secure enough, I'm worried about the phone could probably drops, and it's not cheap actually

My Nexus Wireless Charger Car Mount Setup

Hi everybody! I've seen a few threads about figuring how to use the Nexus Wireless Charger as a car mount/dock for our Nexus 5 phones and this is the solution that I've come up with. It's not the cheapest option as this charger costs more than most others out there. However, I wanted to utilize one of the standout features of the Nexus 5 which is being able to use the wireless magnetic charger out of the box without any modifications. I also didn't want to do any drastic mods to mount that to my car. I've seen other threads showing how some of you smart engineer types can rig some cool setups using paper clips and rubber bands. I'm no Macguyver (though I wish I was that smart).
I actually have tried to mount a wireless charging dock. This was a few years ago when I had the Palm Pre, which had the wireless charging (and also magnetic) Touchstone. To keep it short, I used this moldable plastic stuff to fix it to a car mount, which was then screwed onto my dashboard. It was not pretty at all. Plus, that moldable plastic ended up melting on a hot summer day. Shortly after that Palm got sold to HP and webOS went the way of the Dodo. I moved on to a Samsung Galaxy SII and have been missing the webOS cards and the Touchstone ever since.
Now comes the Nexus 5. To my surprise Google/LG also announces the awesome Nexus Wireless Charger. FINALLY something equivalent to the amazing Palm Touchstone. I just HAVE to have it.
Once you use something like a Touchstone and the Nexus Wireless Charger, it's tough to go back. Yes, you can still plug in the microUSB cord and yes it's not a big deal. But once you start using a nice magnetic wireless charger, you'll know. You just pop the phone on, it holds in place, and charges. Simple. In the car it makes absolute sense. Now I wish that the stock Android homescreen supports landscape mode by default and that there was a better interface for car use, but those are software issues which I think will only get better with time. As far as hardware goes though, the Nexus 5 along with the Nexus Wireless Charger on a good car mount works amazing. No need to modify the phone or your car dashboard and the magnet holds the phone on strongly. The only main disadvantage hardware-wise is that the phone has to be naked for the magnet to hold strongly. I also wish the Nexus 5 has the Touchless Controls of the Moto X; that would seem like the perfect thing to do have while the phone is docked on the car.
TLDR version: Magnetic wireless chargers are friggin awesome and are even more awesomer to use as a car dock. List of stuff, pics and video below.
Please excuse my dirty dusty car, poor speaking skills and shaky camera.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
List of items:
Nexus Wireless Charger
Price: $49.99
https://play.google.com/store/devices/details/Nexus_Wireless_Charger?id=nexus_wireless_charger&hl=en
Arkon Sticky Suction Mounting Pedestal w/ 3" Articulating Arm
Item #: GN079WD-SBH
Price: $14.95
Use with
Arkon Vertical Female Dual T-Slot Adapter w/ 3M Adhesive Back
Item #: AP016-3M
Price: $7.95
http://www.arkon.com/
The 'Sticky Suction' items are new and don't seem to be on the site yet, but they're listed in the 2014 catalog PDF. I was able to order directly from them and pick up since I live nearby in Southern California. I like their modular approach to the car mounts by having the ball and dual T adapters and I was glad to find something that I could easily stick the Nexus wireless charger to for my setup.
Also if you're wondering, this is the USB Car Charger I'm using and it seems to not have any problems so far.
Scosche Dual 10 Watt 2.1A USB Car Charger
http://www.amazon.com/Scosche-USBC202M-Charger-works-iPhone/dp/B0077PM3KG/
I don't know how much I trust that magnet did it fall off on anyone im really tempted to try this out
I really want to do this, but I feel like you can only do this if you don't use a case. Even though the wireless charger should work with thinner cases, I don't think the magnet will hold very well unless the phone is naked.
PsychDrummer said:
I really want to do this, but I feel like you can only do this if you don't use a case. Even though the wireless charger should work with thinner cases, I don't think the magnet will hold very well unless the phone is naked.
Click to expand...
Click to collapse
Correct. I haven't seen a magnetic one yet that can hold this phone with a case on. It's kinda weird considering phone cases are the norm. Why not make it with stronger magnets to compensate?
Sent from the jaws of my Hammerhead!
Better question is why can't someone make a case with metal tabs in the same locations as the phone?
That way the magnets wouldn't have to be stronger.
They'd have my money instantly.
Sent from my Nexus 5 using xda app-developers app
Nice project man! Very clean!
Can you do me a favor? When the phone is attached, can you measure the magnetic field? Just use an apk that measure with the magnetic field sensor of the phone.
Thanks a lot!
Enviado do meu Nexus 5
I have done pretty much the same thing (just a different mount) but I had had issues finding a USB cable that will work. Can you tell me which one you used?
mrro82 said:
Correct. I haven't seen a magnetic one yet that can hold this phone with a case on. It's kinda weird considering phone cases are the norm. Why not make it with stronger magnets to compensate?
Sent from the jaws of my Hammerhead!
Click to expand...
Click to collapse
The Google LG Brand Quick Cover (the flappy one) actually has steel bits to align with the magnets. It actually holds on stronger than without the case!
This is VERY cool! Thank you!
Quick question, do you get any vibrations when driving, or when you hit a speed bump? I drive a truck and the dash vibrats... I wonder if it would hold. I guess I could always connect it to the glass...
Is your phone charging when you are using navigation app (Google maps for example)?
I've tried with Chinese cheap wireless charger and performance for this case isn't amazing.
At least it's not discharging, but not able to charge with navigation on.
Redwid said:
Is your phone charging when you are using navigation app (Google maps for example)?
I've tried with Chinese cheap wireless charger and performance for this case isn't amazing.
At least it's not discharging, but not able to charge with navigation on.
Click to expand...
Click to collapse
I wanted to know the same, as I have a similar setup as the op but when I use gps the battery drains faster then it charges, trying to work out if the 2a car charger isn't supplying enough current or gps just isn't possible with wireless charging?
I need the different links to the apparatus, one of arkon items cannot be shipped to india.

Car Mount

I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
I used a Mountek nGroove before discovering the Nite Ize Steelie magnetic mount. The nGroove worked well. I'm not sure whether or not the One will fit being as big as it is. I'll try and dig mine out of storage and test the fit when I get the phone this week.
nGroove - amazon MT5000-E. I notice they have a "snap" style now. I'll have to check it out. I love the Steelie but not sure if I want a magnetic on the back of the One. It worked great on the Moto X though. I might just get two cases. One for the magnet and one for regular carry.
bought two of the nGroove, just did not work for my wife's crv or my gli, fell out too often.
lensgrabber said:
I used a Mountek nGroove before discovering the Nite Ize Steelie magnetic mount. The nGroove worked well. I'm not sure whether or not the One will fit being as big as it is. I'll try and dig mine out of storage and test the fit when I get the phone this week.
nGroove - amazon MT5000-E. I notice they have a "snap" style now. I'll have to check it out. I love the Steelie but not sure if I want a magnetic on the back of the One. It worked great on the Moto X though. I might just get two cases. One for the magnet and one for regular carry.
Click to expand...
Click to collapse
The cheapest suction car mount from Ebay works great with my OPO!
Cheap and effective!
I'd get a techmatte progrip dashboard mount. That's what i've been using
I actually popped off the battery cover on my OPO & placed a metal plate that comes with the Mountek magnetic dock under the cover. Fits perfectly & the OPO sticks far better than the Nexus 5 ever did.
dboss007 said:
I actually popped off the battery cover on my OPO & placed a metal plate that comes with the Mountek magnetic dock under the cover. Fits perfectly & the OPO sticks far better than the Nexus 5 ever did.
Click to expand...
Click to collapse
I saw a magnetic mount at the store. I like the idea.
Do these magnetic gadgets interfere with NFC, bluetooth of anything else on the phone?
JeffDC said:
I saw a magnetic mount at the store. I like the idea.
Do these magnetic gadgets interfere with NFC, bluetooth of anything else on the phone?
Click to expand...
Click to collapse
Nope. NFC & all other functions work normally.
dboss007 said:
Nope. NFC & all other functions work normally.
Click to expand...
Click to collapse
Thank you.
ejkeebler said:
I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
Click to expand...
Click to collapse
I have the Mountek CD slot magnetic mount and love it! I popped off the swapstyle cover and put the metal plate on the battery and put the cover back on. It works PERFECT. It is next to impossible to tell that the plate is in there, it all just came together perfectly. I hate running around with cases for my phones and was so happy this worked for me.
NFC will not work while on the mount, magnet interferes, but outside of that it works fine for me.
I also had a Nexus 5 and put one of those adhesives inside the OPO
Works amazing since the magnet has huge strength
I'm using the Xenomix SHG-S5000 Smart phone Mobile Mount Holder for Car CD Slot bought from ebay. I was using that for my small galaxy s and now for Oneplus. I'm very satisfied even though I should be carefull when I place the Oneplus on it as it is the biggest phone that this holder can hold...
I use the new Belkin one (a copy of Kenu Airframe+).
It works in my ford focus (4th gen, post 2014) but honestly, stick to the original one (the Kenu Airframe+) which is more convenient.
And it depends on your car too.
I'm using Brodit mounts since my Nokia N900.
This passive one for OPO: http://www.brodit.com/product.html?id=511648&pn=prod&brand=OnePlus&model=One (They also have active ones with USB built in) and then a Proclip which fits your car (this one in my case http://www.brodit.com/product.html?id=854890&pn=prod&brand=Seat&model=Leon&year=2015). If you change your phone or car you only have to change half of the mount.
question about compatibility with my car
I have a 2013 Hyundai Genesis Coupe, and I am concerned the mountec groove snap 3 would block the view of my cars touchscreen. Here is a pic of the dashboard where the cd slot is, sitting immediately below the touch screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How would this work with the mountec mount? Or from the dash layout can you see what other options might work in this situation?
I have the mountec snap 3 and all depend how you put it. Basically, if you put the tightening bolt down the phone will definitely be below the touchscreen. The only problem will be that the buttons will be block a little, but most of those functions can be accessed from the buttons in the steering wheel. I hope this info help.
I got the mount. Doesn't fit very well in CD slot. Comes out easily. Working on other ideas now
I grabbed the iOttie One Touch 2 mount from Massdrop. Took awhile to get, but got a great price. Looks like they'll be doing another drop soon if you're interested in that. https://www.massdrop.com/buy/iottie-one-touch-2?s=iottie
RRuszczyk said:
I grabbed the iOttie One Touch 2 mount from Massdrop. Took awhile to get, but got a great price. Looks like they'll be doing another drop soon if you're interested in that. https://www.massdrop.com/buy/iottie-one-touch-2?s=iottie
Click to expand...
Click to collapse
I dont really care for for the car mounts that require a suction cup. I prefer a vent mount or something like that.
car mount
ejkeebler said:
I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
Click to expand...
Click to collapse
In Spain we haven't nothing to do this... could you fix it?

Categories

Resources