Can't update to CM11 coming from CM10.2.
It says something like "this is for gt N5100, kona-3g?(not sure), N5100, This is kona-wifi(not sure again)"
but I'm sure my phone is N5100
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
I already tried removing the assert line. It still failed. I'll try the Twrp. Thank you very much.
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
Tried twrp and deleting assert line in updater script. And it didn't work.
Hwoarang04 said:
Tried twrp and deleting assert line in updater script. And it didn't work.
Click to expand...
Click to collapse
May I know what error are you getting and which recovery you are using now?
superng888 said:
May I know what error are you getting and which recovery you are using now?
Click to expand...
Click to collapse
Problem already solved. I used philz touch. Thanks anyway. :highfive:
EDIT:
Okay that was fixed with using the latest PhilZ advanced CWM ver 6
hi there
i have exactly the same problem
im using PhilZ CWM and tried to flash the OMNIROM for GT-N5100
My Galaxy is all new and this is my first time to flash an android device
flashing the root pack and the PhilZ CWM worked like a charm, but if i try to flash the ROM for my GT-5100 it rants about "this for for kona-3g, this is device kona-wifi"
I triple-checked the build-info in the device settings, and it says everywhere "GT-N5100" - even at bootup
The ROM im trying to use is named like :
omniß4.4.20131224ßn5100-homemade.zip
im using Philz Touch 5 CWM 6 version CivZ 1.1
error is :
THis package is for "GT-N5100,kona3g..." device this is a "konawifi" (status 7)
Any ideas ??
same problem
Hwoarang04 said:
Problem already solved. I used philz touch. Thanks anyway. :highfive:
Click to expand...
Click to collapse
I have the same problem can you tell us how you fix this?? TKS
UP
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
Same here, it is not really helpfull to just say "Okay, problem solved" without giving a detailed explanation. Could you give us some feedback please ?
---------- Post added at 11:27 PM ---------- Previous post was at 11:16 PM ----------
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
I finally got the last zip of PhilZ Touch recovery, extracted it to get the recovery.img file and launched the following command: sudo heimdall flash --RECOVERY recovery.img
Because I am undr Mac osX and do not have Odin, so I use heimdall instead. Hope it will help
Back Online
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
oppossuminabag said:
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
Click to expand...
Click to collapse
Hi,
I tried the above and still get the Status 7 error. Have even tried a new version of 6.48.4-n5110 and no avail. I'm on the verge of throwing away this phablet into the dustbin.
Related
Every time I try to install CM 10 on my phone, it just says:
assertfailed: getprop("ro.product.device") == "d2att" || getprop ("ro.build.product") == "d2att" E: Error in /sdcard/cm-10-20120810-UNOFFICIAL-d2att.zip
(Status 7)
Click to expand...
Click to collapse
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
Change the updater script....
Sent from my SAMSUNG-SGH-I747 using xda premium
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
You need to install the propery recovery on your phone. I'll see if I can get you a link
http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.4.7-d2att.img
howtomen said:
Change the updater script....
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
And how do I change the updater script?
DavGerm4 said:
And how do I change the updater script?
Click to expand...
Click to collapse
Install the official CWM recovery then you don't have to worry about that
malinois16 said:
Install the official CWM recovery then you don't have to worry about that
Click to expand...
Click to collapse
Where does the img go so that CWM can see it on my phone? Or do I boot into CWM and update it that way?
Did you change the build.prop for the Google Wallet work around? Change it back, everything should work again.
malinois16 said:
You need to install the propery recovery on your phone. I'll see if I can get you a link
Click to expand...
Click to collapse
That got it working! Thanks for the help! Thanks everyone!
n00b question of the day.
What exactly do you do with that .img file?
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Ok I figured it out and everything is working fine! I'm now running CM 10!
I wasn't familiar with using .img files and terminal emulator. But with a little help from here http://forum.xda-developers.com/showthread.php?t=1739426 I solved my problem!
Thanks mrhaley30705 for pointing me in the right direction.
Thank You Everybody
skinny18 said:
Ok I figured it out and everything is working fine! I'm now running CM 10!
I wasn't familiar with using .img files and terminal emulator. But with a little help from here http://forum.xda-developers.com/showthread.php?t=1739426 I solved my problem!
Thanks mrhaley30705 for pointing me in the right direction.
Click to expand...
Click to collapse
I was having the same problem but like a user in the earlier post said "Simply download the Rom Manager and Flash the recovery for your model" all problems will be solved regarding "Status 7" error. Thank You
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
I had this problem last night myself...turns out it was due to the version of CWM recovery I was running, which was v5.4.x.x, IIRC. I used adb to install the latest version of CWM, v.6.0.x.x IIRC and reattempted the flash and it worked fine.
noob question, but since CM10 doesn't have a Rogers version, are you using the AT&T one?
thanks!!
Thanks to everyone who posted about the d2tt.img recovery...it finally soved that problem.
Thank You!
irish.iolar said:
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just updated the CWM to the touch one and that's it!!! Works like a charm, running paranoidkandroid...:good:
irish.iolar said:
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ummmm bit of a noob question but how do we do that
Druter said:
Ummmm bit of a noob question but how do we do that
Click to expand...
Click to collapse
Go to the app store, download Rom manager and update recovery.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Delete post
The text on the screen is SUPER SMALL in CWM!!!
Anyone know how to increase the text size?
Delete post
Will this work with the official ATT V20C ICS release?
Delete post
wayneneely said:
Will this work with the official ATT V20C ICS release?
Click to expand...
Click to collapse
Yes you can but your phone must be cwm flashable to start using the unbricking guide in this forum.
Sent from my LG-P930 using xda app-developers app
---------- Post added at 02:03 PM ---------- Previous post was at 01:57 PM ----------
slg1119 said:
Hi Guys~
This CWM is No Touch and
Mass stotage Fix
Download and drop at sdcard
And
Turn on Android Terminal
For SU640
su
cd /sdcard
cat Cwm_6.0.1.2_for_su640.img > /dev/block/mmcblk0p13
For P93X
su
cd /sdcard
cat Cwm_6.0.1.2_for_P930.img > /dev/block/mmcblk0p13
Download For SU640
http://db.tt/lPJmW43T
Download For P93x
http://db.tt/2d0XVIdt
Sorry I am not good English ;-(
Thank You~
Sent from my LG-SU640 using XDA
Click to expand...
Click to collapse
BTW I couldn't get this to work using the CAT command in terminal but this worked:
dd if=/sdcard/Cwm_6.0.1.2_for_P930.img of=/dev/block/mmcblk0p13
Then reboot
Sent from my LG-P930 using xda app-developers app
Anybody have any comments on the performance of this CWM? I'm hesitant to load up anything other than the official which has been working just fine for me for months.
Malnilion said:
Anybody have any comments on the performance of this CWM? I'm hesitant to load up anything other than the official which has been working just fine for me for months.
Click to expand...
Click to collapse
The only thing I can say is it performs the same but it is just gorgeous on the lg display, beautiful background with text that just pops off the screen. But like the poster said above text is a bit small but I think more readable than the old version of cwm.
Sent from my LG-P930 using xda app-developers app
Just tried, looks very good on P930, however, it seems to NOT WORK properly.
I flashed this CWM using the command posted by Swetnes (post #6).
After which, I then tried flashing the latest CM10 nightly using it, flashed failed with build.prop error. (MD5 of my nightly download checks out.)
Tried the 25th nightly, same error.
Rebooted, re-flashed CWM 5.8.2.0 using ROM Manager, then attempted to flash the lastest nightly again (same file on the SD, I did not re-copy or re-download), succeeded the first try.
Anyone on 6.0.1.2 encountered the same errors as above?
potatohead said:
Just tried, looks very good on P930, however, it seems to NOT WORK properly.
I flashed this CWM using the command posted by Swetnes (post #6).
After which, I then tried flashing the latest CM10 nightly using it, flashed failed with build.prop error. (MD5 of my nightly download checks out.)
Tried the 25th nightly, same error.
Rebooted, re-flashed CWM 5.8.2.0 using ROM Manager, then attempted to flash the lastest nightly again (same file on the SD, I did not re-copy or re-download), succeeded the first try.
Anyone on 6.0.1.2 encountered the same errors as above?
Click to expand...
Click to collapse
I screwwed up my device with chainfire3d and tried flashin something in cwm and it returned a build.prop error. That could have prevented me from unbricking.
Sent from my LG-P930 using xda premium
rani9990 said:
I screwwed up my device with chainfire3d and tried flashin something in cwm and it returned a build.prop error. That could have prevented me from unbricking.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
I have only ever used to switch between cm9 and official now with the last two posts it seems there may be a problem I may switch back to the stable version.
Sent from my LG-P930 using xda app-developers app
So I just found out you could do this today, but if you go to builder.clockworkmod.com, you can tell it to build a CWM image for a bunch of devices. I went ahead and had it build 6.0.1.3 for our P930. It could be fun playing with the update.zip exporting feature in this CWM. At the same time, the barrier for entry just got lowered substantially for rom "developers".
Note: I have not tested any of the functions of this CWM, so don't blame me if it jacks your phone up. I didn't even build it myself, Jenkins did
Edit, I tried to do the same for the SU640, but no joy there. The build failed.
Edit #2, Okay, so this autobuilt CWM won't flash roms for me. It is hamstrung on the asserts for ro.product.device and ro.build.product. Ah well, it was worth a shot
Edit #3, You really don't wanna use this, it will screw things up for you.
thank u~
Sent from my LG-P930 using xda premium
slg1119 said:
Hi Guys~
This CWM is No Touch and
Mass stotage Fix
Download and drop at sdcard
And
Turn on Android Terminal
For SU640
su
cd /sdcard
cat Cwm_6.0.1.2_for_su640.img > /dev/block/mmcblk0p13
For P93X
su
cd /sdcard
cat Cwm_6.0.1.2_for_P930.img > /dev/block/mmcblk0p13
Download For SU640
http://db.tt/lPJmW43T
Download For P93x
http://db.tt/2d0XVIdt
Sorry I am not good English ;-(
Thank You~
Sent from my LG-SU640 using XDA
Click to expand...
Click to collapse
Hi, the link for SU640 is dead. Could anyone give me a new link? Thank!
flashing recovery image downloaded from clockworkmod.com for LG Optimus LTE (SU640) using the procedure mentioned in this post leads me to
Secure booting Error !
cause: Boot certification verify
Enter the fastboot
Long time no see
------------------------
any help ?
salimbaba said:
flashing recovery image downloaded from clockworkmod.com for LG Optimus LTE (SU640) using the procedure mentioned in this post leads me to
Secure booting Error !
cause: Boot certification verify
Enter the fastboot
Long time no see
------------------------
any help ?
Click to expand...
Click to collapse
Usually see that when trying to flash over Official ICS. If that's the case, you'll have to follow one of the unbrick guides in the "General" section.
Dear all,
I think, I softbricked my international e975 after installing psx rom. Now I have only TWRP, but it is not recovering my cwm backup, also, my phone is recognised as nexus4...I have only cwm back on my phone and the psx rom.zip file on my phone....I'm able to boot into twrp recovery. Can anyone please help me on how to adb push any rom zip file for installing? also, I'm downloading the .kdz file for my e975 indian version... any help please!!!!!!!
cooljay5 said:
Dear all,
I think, I softbricked my international e975 after installing psx rom. Now I have only TWRP, but it is not recovering my cwm backup, also, my phone is recognised as nexus4...I have only cwm back on my phone and the psx rom.zip file on my phone....I'm able to boot into twrp recovery. Can anyone please help me on how to adb push any rom zip file for installing? also, I'm downloading the .kdz file for my e975 indian version... any help please!!!!!!!
Click to expand...
Click to collapse
Use "adb push" to push cwm.zip (link on development forum) and then flash it
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
I think there no is another method.
Maybe flash KDZ back, root, unlock bootloader, install CWM and restore backup.
ok. thank u.... but when im connected in recovery mode(twrp) my device is shown as nexus4, so will i be able to flash kdz still???
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
fix the driver is that so hard?
use latest ver of adb.
yes you can kdz just read the post i have already did here.
cooljay5 said:
ok. thank u.... but when im connected in recovery mode(twrp) my device is shown as nexus4, so will i be able to flash kdz still???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
Yes. Is just that for KK we need the lastets TWRP, which is not for Optimus G and we use the Nexus 4 TWRP. Or at least i think so. You can flash kdz.
nch26 said:
Yes. Is just that for KK we need the lastets TWRP, which is not for Optimus G and we use the Nexus 4 TWRP. Or at least i think so. You can flash kdz.
Click to expand...
Click to collapse
nope it was before the cm11, use the official cwm (posted in general for easy flash) and its all fine.
ok.. I would like to try to kdz method, but the link, given in OP is given an "uncatchable exception" error, both in firefox and chrome. Can anyone pls give me a working link for e975 indian version please.. this would be very helpfull...
cooljay5 said:
ok.. I would like to try to kdz method, but the link, given in OP is given an "uncatchable exception" error, both in firefox and chrome. Can anyone pls give me a working link for e975 indian version please.. this would be very helpfull...
Click to expand...
Click to collapse
http://lg-phone-firmware.com/index.php?id_mod=20
root than use the freegee i have posted and cwm update that i have posted and you are all set to try cm11
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
cooljay5 said:
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
Click to expand...
Click to collapse
Check your browser settings... This link goes to a long list of KDZs for LGOG.
sorry for asking too many questions.. can i get a full working link??
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
Click to expand...
Click to collapse
Hope you don't want me to come to your place and flash it for you.?
You have to press skip add top right
Sent from my Nexus 7 using Tapatalk
atfish mate,
Sorry for the trouble and noobish questions... Thank you verymuch to all of you, who helped me.... I have downloaded the kdz.. I will try to flash this and will post the results...
Thank you once again.....
What? U should have replaced ur recovery with a cwm to restore ur cwm backup.. Very easy in fastboot mode via adb.. Why go all in this trouble
Sent from my Optimus G using Tapatalk
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
Also i use cwm philz edition for installibg KK ROMs.. U dont have to use twrp, u just have to delete some assert lines in the script if u use cwm
Sent from my Optimus G using Tapatalk
davevinci said:
u just have to delete some assert lines in the script if u use cwm
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Not with CM11 and official recovery that I have posted.
Sent from my GT-P3100 using Tapatalk
Thank you atfish, davevinci and all other helpfull members, who guided me through this entire nightmare.., after 4 to 5 hours of googling, i did an adb sideload push savvyrom v3 to my phone, now everything is up and running... Thank you so much...
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
cooljay5 said:
Thank you atfish, davevinci and all other helpfull members, who guided me through this entire nightmare.., after 4 to 5 hours of googling, i did an adb sideload push savvyrom v3 to my phone, now everything is up and running... Thank you so much...
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
Click to expand...
Click to collapse
The freegee backup is not nessesary for anything. If your phone is running stock firmware, i recommend root it using framaroot, and unlock bootloader with freegee. This will install a recovery.
If you already have TWRP, delete script lines of CWM recovery and install it. If you dont know how to do it tell me.
cooljay5 said:
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
Click to expand...
Click to collapse
Freegee backup is your efs and boot files for later use if required. Save them in dropbox or something they are very handy in bad times.
If you are already unlocked with freegee than you have a custom recovery just boot into recovery and update the recovery using zip. Like the cwm one I have posted.
Yes if you are not unlocked, use the old freegee.apk
Sent from my LG-E975 using Tapatalk
Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
[URL="https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip"]https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip[/URL]
Jerome-X said:
Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip
Click to expand...
Click to collapse
But how to install it, I am stock in philz recovery, cant boot
Stock rom is installed (4.2.2) ? then use this one to install this recovery:
http://forum.xda-developers.com/showthread.php?t=2701638
Does it work on 4.4.2 ?
i dont know, if u changed anything, but ur Version is the latest from... 03.03.2104 (6.19.7)
Newest is from 31.03.2013 (6.25.4)
Or is there a different from urs and Philz_Touch_Advanced_Version?
Easiest way, check Goo.im Link from philz touch!!!
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d802
Is this kernel compatible with cm11 or just stock ? Thanks
jeepcook said:
Is this kernel compatible with cm11 or just stock ? Thanks
Click to expand...
Click to collapse
What kernel? This is a recovery image...
LenAsh said:
What kernel? This is a recovery image...
Click to expand...
Click to collapse
oups
You using rom CM 11..can you something king about it??..v...v.....i want up it but i dont know how they do it!!!!!!!!!!!!!!!!!!!!!!!
vuut said:
You using rom CM 11..can you something king about it??..v...v.....i want up it but i dont know how they do it!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
UHHHH ... what ..??? i do not understand this message !!
---------- Post added at 07:52 PM ---------- Previous post was at 07:44 PM ----------
Hi ,,, i have philz recovery ... now i wanna know what size background i need to get a full background in Recovery ... i have made an map with the name Custom_res .. but when going to the PNG. FILE its gives me six small ones .. any help ... on what size png. to get an good background in Recovery ???
Will this work in 4.4.2? I just rooted my phone and installed Autorec to have TWRP but i prefer Philz. can i use this?
I'm currently using TWRP 2.6.3.4, if I want to change it to Philz, do I just need to flash the zip? Because some people said they got an error and can't boot into their recovery anymore.. :/
Sent from my LG-D802 using XDA Premium 4 mobile app
marshygeek said:
Will this work in 4.4.2? I just rooted my phone and installed Autorec to have TWRP but i prefer Philz. can i use this?
Click to expand...
Click to collapse
Yes,, it will work on 4.4.2. I had it on Pardus 4.4.2 .. but went back to Pardus 4.2.2. There are to many thing NOT really working yet ..!!
Good luck !!
---------- Post added at 07:31 PM ---------- Previous post was at 07:29 PM ----------
Rei Zazie said:
I'm currently using TWRP 2.6.3.4, if I want to change it to Philz, do I just need to flash the zip? Because some people said they got an error and can't boot into their recovery anymore.. :/
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This zip has no problems whatsoever ... just flash and run
No adb needed ..!! Goodluck !!
Ive downloaded the zip file to my pc but when i unzip it it has no BAT file to run?
I thought that im supposed to connect my lg g2 d802 to my pc via usb.
Ive got all drivers installed correctly
But when i download the zip file to my pc it hasnt got any windows batch file inside anywhere! Am i doing something wrong here?
wolverine73 said:
Ive downloaded the zip file to my pc but when i unzip it it has no BAT file to run?
I thought that im supposed to connect my lg g2 d802 to my pc via usb.
Ive got all drivers installed correctly
But when i download the zip file to my pc it hasnt got any windows batch file inside anywhere! Am i doing something wrong here?
Click to expand...
Click to collapse
"flashable" zip as in the OP means u have to flash via your current recovery, I guess (of course if you are rooted and installed a custom recovery).
Does anybody have a mirror? I can't download the recovery since I get server problems...
This is noto the mirror.
This is tge officiale repo.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d802
Hey guys. Has anyone tried to install this via Flashify on 4.4.2 STOCK LG ROM? Will it work? Thanks ahead.
Cheers.
EDIT: Found my answer, wrong thread also!
Jerome-X said:
Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip
Click to expand...
Click to collapse
Nothing Here
The file you're looking for has been deleted or moved.
https://www.dropbox.com/s/ml97hneej5o3s8k/D802-Philz~JX%21.zip
404 error
Another link plz?
Thanks.
First of all I am a noob and dont know much.
My tab is rooted and has cwm
I wiped the data and factory reset
Then I cleaned the rom to add a custom rom
while trying to install zip. It said
expects 5 args, got 4
Installation aborted.
Now my tab only opens and shows the logo Samsung Galaxy Tab 3
And freezes. Please help im really a noob and i dont have a backup.
is there a way i can still connect my tab to pc even though its only in download mode or recovery?
I need to access my files. Pls help
And i need to fix my tablet asap.
Hoping for any help. thanks
palagpalags said:
First of all I am a noob and dont know much.
My tab is rooted and has cwm
I wiped the data and factory reset
Then I cleaned the rom to add a custom rom
while trying to install zip. It said
expects 5 args, got 4
Installation aborted.
Now my tab only opens and shows the logo Samsung Galaxy Tab 3
And freezes. Please help im really a noob and i dont have a backup.
is there a way i can still connect my tab to pc even though its only in download mode or recovery?
I need to access my files. Pls help
And i need to fix my tablet asap.
Hoping for any help. thanks
Click to expand...
Click to collapse
The rom you are trying to flash must have an old update binary/script.
Download CWM 6.0.4.5 and flash it, then you can install the rom.
Sent from my SCH-I605
gr8nole said:
The rom you are trying to flash must have an old update binary/script.
Download CWM 6.0.4.5 and flash it, then you can install the rom.
Sent from my SCH-I605
Click to expand...
Click to collapse
I can't seem to find a 6.0.4.5 for Samsung Galaxy Tab 3 7.0 , what should I use ?
palagpalags said:
I can't seem to find a 6.0.4.5 for Samsung Galaxy Tab 3 7.0 , what should I use ?
Click to expand...
Click to collapse
Same link as 6.0.4.7
Sent from my SCH-I605
Try to flash stock rom, download it from sammobile.com
If it won't works then try to find pre rooted rom for it
I rooted mine with pre rooted file, it's about 1.3gb but I think it's last option for you
And can you give me link to cwm recovery for sm-t211?
Sent from my SM-T211 using xda app-developers app
gr8nole said:
Same link as 6.0.4.7
Sent from my SCH-I605
Click to expand...
Click to collapse
I am already using 6.0.4.7. But it still didn't work
palagpalags said:
I am already using 6.0.4.7. But it still didn't work
Click to expand...
Click to collapse
That's why I said to use 6.0.4.5. It is available at the same link.
Sent from my SCH-I605
gr8nole said:
That's why I said to use 6.0.4.5. It is available at the same link.
Sent from my SCH-I605
Click to expand...
Click to collapse
I can't seem to find the link. Can you please tell me where? I would appreciate it. Thanks
palagpalags said:
I can't seem to find the link. Can you please tell me where? I would appreciate it. Thanks
Click to expand...
Click to collapse
Perhaps, you could try this:
www .androidfilehost. com / ?fid = 23329332407567959
just remove spaces
but personally i'd recommend Philz Touch Recovery for Tab 3 (there's unofficial mod)