Hi everyone!
This is my first Kernel. I hope you will like it. I'm not a developer. I am still learning...
FEATURES
*Kernel 3.4.74
*Build with Linaro GCC 4.8.3 2013.11 toolchain by Christopher83
*O3 Optimization
*Overclock up to 1.8 GHz
*CPU voltage control VDD sys interface
*Lowered display panel voltage
*Lowered wifi voltage
*Fast Charge support
*Battery Life eXtender support
*Increase audio loudness
*Con Kolivas' CK3 Tweaks
*Fast Random generator (frandom) support
*Dynamic management of dirty page writebacks
*Dynamic management of the minimal slack
*Dynamic file sync
*LowMemoryKiller management of not killable processes
*370MB Ram
*Governers : lulzactive, interactive, powersave, smartassV2, performance ( default smartassV2 )
*I/O schedulers : noop, row, sio, cfq, bfq ( default sio )
INSTALLATION GUIDE
Reboot To Recovery Mode
Flash the kernel
Wipe Cache & Dalvik Cache
Reboot System
CREDITS
arco68
Christopher83
educk
madridii
arsradu
and all github users for their commits
<<DOWNLOAD>>
Code:
You can use [URL="http://forum.xda-developers.com/showthread.php?t=2401988"][COLOR="DeepSkyBlue"]Performance Control[/COLOR][/URL] to edit all features.
CHANGELOG
v1
initial release
v1.1
fixed battery icon stuck problem
Click to expand...
Click to collapse
XDA:DevDB Information
CM 10.2 - 4.3.1 - Khan Kernel, a Kernel for the Samsung Galaxy W I8150
Contributors
lafactorial
Kernel Special Features: Overclock Support
Version Information
Status: Beta
Current Beta Version: v1.1
Beta Release Date: 2013-12-16
Created 2013-12-15
Last Updated 2013-12-16
Wow thanks guys...can you also make for cm 11? If you free time?
Sent from my GT-I8150 using Tapatalk
Very thanks brother.
Success and ease.
Cwm 6.0.4.5 used
heloo, when i flash it, i got installation aborted, i think my downloaded file is corrupt and then i download it again, and when I flash it, i got installation corrupt again. i don't know why, i'm using cm10.2 build 4 by arsradu and using cwm 6.0.4.5.
ianfebriyanto said:
heloo, when i flash it, i got installation aborted, i think my downloaded file is corrupt and then i download it again, and when I flash it, i got installation corrupt again. i don't know why, i'm using cm10.2 build 4 by arsradu and using cwm 6.0.4.5.
Click to expand...
Click to collapse
Similar problem before.
Dev @arsradu Quote
The kernel was tested. So...no, I don't think that's from the kernel. Make sure you downloaded it entirely. And...I don't know, make sure you don't have any funny stuff like custom recovery or something like that installed on your phone. Other than that...it should work.
ali7557 said:
Very thanks brother.
Success and ease.
Cwm 6.0.4.5 used
Click to expand...
Click to collapse
Great, how u got touchwiz on 4.3.1 ?, ok thanks
ali7557 said:
Similar problem before.
Dev @arsradu Quote
The kernel was tested. So...no, I don't think that's from the kernel. Make sure you downloaded it entirely. And...I don't know, make sure you don't have any funny stuff like custom recovery or something like that installed on your phone. Other than that...it should work.
Click to expand...
Click to collapse
yeah, my bad. i don't know, this is my recovery or something else that weird. i try flash stock kernel by arsradu I got installation abort. i flash it when i using cwm 6.0.4.4 it's ok, no problem. I think this is not the file that corrupt. I'm using cwm 6.0.4.5 that hadi posted in his cm11 section, and install it by ATE.
ianfebriyanto said:
yeah, my bad. i don't know, this is my recovery or something else that weird. i try flash stock kernel by arsradu I got installation abort. i flash it when i using cwm 6.0.4.4 it's ok, no problem. I think this is not the file that corrupt. I'm using cwm 6.0.4.5 that hadi posted in his cm11 section, and install it by ATE.
Click to expand...
Click to collapse
Look, my dear brother
He uses the hadidjapri 6.0.4.5 with cwm.
My similar problem had been.
Dev asked him to Arsradu.Had given the answer to the above.
I don't know what the problem is.
6.0.4.4 try to install with.
sigprof said:
Android developers changed the format of the shared memory area used to store system properties in the kitkat branch, then made some further changes (1, 2, 3, 4). Then they added backward compatibility with the older format, but only in one direction — now an executable linked with the new bionic libc can work even if the init process is from an older version (the commit log mentions the case when an older recovery is used to install an update.zip for a new version), but an executable linked with the old bionic libc will not work with a new init process. The latter case is what happens when you try to install a baseband zip file using the recovery built for kitkat — every update.zip file contains its own update-binary inside, and in this case update-binary is statically linked with the old (pre-kitkat) bionic libc. Because of this incompatibility getprop() calls in the updater-script do not return the expected values, and the compatibility check fails.
I could try to update at least my baseband zip files with a new update-binary, but this will take some time to check whether this could really work with different recovery versions, and then to upload all those files and update links to them.
BTW, the CWM recovery 6.0.4.5 image from this thread seems to be built in the 4.3.1 (JB) environment, therefore baseband update zips should be installable with this recovery version (however, I'm not sure about compatibility with kitkat ROMs).
Click to expand...
Click to collapse
maybe this is the answer to our problem.
Someone could try arco cwm 6.0.4.5, it is built in 4.3.1 enviroment the others should be 4.4.1 enviroment
i have a bug to report with this kernel: it's almost 1hour and a half that i'm surfing the web, using facebook app and playing, and my phone battery's percentage stuck at 23%!! (the percentage that was when i rebooted the device after flashing this rom)
jam90 said:
i have a bug to report with this kernel: it's almost 1hour and a half that i'm surfing the web, using facebook app and playing, and my phone battery's percentage stuck at 23%!! (the percentage that was when i rebooted the device after flashing this rom)
Click to expand...
Click to collapse
Thanks for the report. I think I used the wrong zImage while compiling. I will fix it when I get home.
lafactorial said:
Here is anykernel version attached. You can flash it.
Click to expand...
Click to collapse
And remember that you can successfully flash "anykernel" version if you're running the stock kernel by Radu. Other than that you can face some system apps FC.
One can easily flash "anykernel" version over the stock kernel only once. The reason is the ramdisk.
Sent from my GT-I8150 using Tapatalk
LeroViten said:
And remember that you can successfully flash "anykernel" version if you're running the stock kernel by Radu. Other than that you can face some system apps FC.
One can easily flash "anykernel" version over the stock kernel only once. The reason is the ramdisk.
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
Yes you are right. I will make a boot.img version when I get home from work.
Sent from my GT-I8150 using XDA Premium 4 mobile app
What's this "anykernel"? A simple stock kernel, or a modified one by you without that bug?
Sent from my GT-I8150 using xda app-developers app
jam90 said:
What's this "anykernel"? A simple stock kernel, or a modified one by you without that bug?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Anykernel only flashes the kernel zImage and modules not the ramdisk. So this is a modified one and there is no battery stuck problem.
Sent from my GT-I8150 using XDA Premium 4 mobile app
lafactorial said:
Anykernel only flashes the kernel zImage and modules not the ramdisk. So this is a modified one and there is no battery stuck problem.
Sent from my GT-I8150 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so this is your kernel but without the ramdisk. And what this will mean? If this is a modified one without battery stuck problem, why don't you post directly this in your first post? Just for knowledge
jam90 said:
so this is your kernel but without the ramdisk. And what this will mean? If this is a modified one without battery stuck problem, why don't you post directly this in your first post? Just for knowledge
Click to expand...
Click to collapse
I already changed the first post.
Sent from my GT-I8150 using XDA Premium 4 mobile app
lafactorial said:
I already changed the first post.
Sent from my GT-I8150 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok, thanks, but i asked you antoher thing. Just for my knowledge, don't take it like an offense or something else rude, please!
What's the difference between the first kernel you posted and this? what the ramdisk less mean? i repeat, not for criticize you, just for my knowledge
fdc77 said:
maybe this is the answer to our problem.
Someone could try arco cwm 6.0.4.5, it is built in 4.3.1 enviroment the others should be 4.4.1 enviroment
Click to expand...
Click to collapse
yes right, i flash latest cwm from arco and it work.
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
ali7557 said:
Look, my dear brother
He uses the hadidjapri 6.0.4.5 with cwm.
My similar problem had been.
Dev asked him to Arsradu.Had given the answer to the above.
I don't know what the problem is.
6.0.4.4 try to install with.
Click to expand...
Click to collapse
thanks bro, the problem is the rcovery. i flash it with latest arco recovery and it work.
jam90 said:
ok, thanks, but i asked you antoher thing. Just for my knowledge, don't take it like an offense or something else rude, please!
What's the difference between the first kernel you posted and this? what the ramdisk less mean? i repeat, not for criticize you, just for my knowledge
Click to expand...
Click to collapse
ramdisk is a small partition image that is mounted by the kernel at boot time. It only contains init and a few config files. It is used to start init which will mount the rest of the system images properly and run the init procedure.
Just googled it as I dont know the exact definition...
Sent from my GT-I8150 using XDA Premium 4 mobile app
Related
DISCLAIMER: I'm not responsible in any case if using this firmware will damage your Tab.
This kernel works only with Euro roms and Gingerbread systems.
CHANGE LOGS ON 2ND POST
Kernel description:
- Based on Overcome v4.0 Kernel thanks Alterbridge86, plus a couple of features:
- Tiny-shmem , thanks to Ronis_BR
- Lagfree and Smoothass Governors , thanks to Ronis_BR
- CWM 3.0.0.5 (oldest, but i was not able to use Overcome one, Rom didn't boot)
- Thanks to Koxudaxi for his initramfs and various patches already included in Overcome kernel.
- Thanks to stratosk for his help and semaphore kernel tips.
- Thanks to HM.carbide for his cache fix app.
- Thanks to LIPPOL94 for kernel cleanin script
- Thanks to CarpeNoctem for testing
-Thanks to kaiser_tytnii for testing
- LCD and RAM Voltage are not undervolted, stock Samsung, my personal choice.
- Thanks to Dizgustipated for some of new Governors.
Installation:
This kernel doesn't include Voodoo lagfix, basically it doesn't convert your partitions into EXT4 but it does include EXT4 drivers.
If you come from an Overcome kernel then just flash the .zip via CWM and reboot, your system was already been converted from Overcome kernel.
If you come from a stock kernel then your system it is rfs and will be not touched.
Download:
AF974-KERNEL-P1000- V.3.0
Old Releases:
AF974-Kernel-P1000-v1.0
AF974-Kernel-P1000-v1.0.tar
You will not find a donate button ever cause i do this for fun and to give people who use the same phone as me more selection, just hit the thanks button and leave feedback.
GPL compliance:
In above kernel description if you will click on every name posted you will find every patch that i used here, i did not change anything else so i don't need to post any Github link in compliance with GPL and XDA rules.
Source for new governors:
Governors-source-V3.0
18-Nov-2011 V.2.0:
Add new Governors:
brazilianwax
savagedzen
interactivex
lulzactive
minmax
lagfree
smoothass
smartassv2
++Semaphore scripts to change virtual Cache to 50 Mb and other scripts.
++Initramfs from JQ4
++Some fix
This link is broken in the tab...
Thanks
Sent from my GT-P1000 using xda premium
In thirst installation there was a failure in connecting to the wifi, after a reboot the problem as gone..
Running smooth until this time.
Need more time to test it... Thanks
Sent from my GT-P1000 using xda premium
Nice, thanks for feedback.
To be honest iirc i don't remember if i had a wi-fi problem at first installation, anyway let me know if problems will occur.
I'm particular interested how do you feel with battery life in addiction to new governors, i feel good with lagfree right now and i'm loosing 2% overnight.
nscosta said:
In thirst installation there was a failure in connecting to the wifi, after a reboot the problem as gone..
Running smooth until this time.
Need more time to test it... Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
The wifi problem is still there, after two hours offline I connect to wifi and I had to reboot again.
About battery I will use now use lagfree to see any changes... I was using on demand and I saw no difference...
Will see...
Thanks
Sent from my GT-P1000 using xda premium
Good work!! Unfortunately, I can't test your kernel since I have a P1000L tab...
Just one question, you said that you choose to avoid RAM and LCD undervoltage. Can you tell me why? I have been using aggressive undervoltage settings for LCD (2.1V) and I haven't noticed anything until now. No glitches, no weird things. But I know that this can change between devices. Do you know if anyone has had any kind of problems with undervoltage?
Thanks!
Ronan
Ronan, good work to you since i've only applied your patches Thanks.
About RAm and LCD undervolting i've always had some doubt about the real gain in battery save and after seeing this post from Technomancer i've decided to give it a try.
Till now my battery last even better than before, don't know, it could be a placebo effect though
Too bad that i have only one feedback till now that i have 45 downloads
Ronis_BR said:
Good work!! Unfortunately, I can't test your kernel since I have a P1000L tab...
Just one question, you said that you choose to avoid RAM and LCD undervoltage. Can you tell me why? I have been using aggressive undervoltage settings for LCD (2.1V) and I haven't noticed anything until now. No glitches, no weird things. But I know that this can change between devices. Do you know if anyone has had any kind of problems with undervoltage?
Thanks!
Ronan
Click to expand...
Click to collapse
I'm just went to home and activated my wi-fi without issue but maybe it is because i've made a clean rom/kernel installation yesterday.
Give a try to reboot into CWM and clean CACHE and see if it work.
nscosta said:
The wifi problem is still there, after two hours offline I connect to wifi and I had to reboot again.
About battery I will use now use lagfree to see any changes... I was using on demand and I saw no difference...
Will see...
Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
I tried to connect to gps and gave error. The same with maps and ndrive...
The wifi problem didn't despear with cache cleanup.
Thanks
Sent from my GT-P1000 using xda premium
Lol i'm starting to have doubt that you have an euro tab . . . . Jk.
Anyway, are you using it with my rom or another?
I suggest you to stay with overcome kernel ( and rom if you have it) and maybe try again it once you will do a future wipe for a future rom.
I know, i can be boring but i do not have all these problems.
Thanks.
nscosta said:
I tried to connect to gps and gave error. The same with maps and ndrive...
The wifi problem didn't despear with cache cleanup.
Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
I have your rom (full wipe) , I already moved to overcome kernel(no problems). So the problem isn't my tab
Sent from my GT-P1000 using xda premium
Add kernel in .tar format for flashing with Odin.
I downloaded it but I didnt update because some feedbacks seem bad with wifi.
However today I update it.
Very well.
Updated, I copy file "wpa_supplicant" to replace original file and my wifi is alright.
Thank you!
Sorry for my english so bad.
Thanks for feedback,
however, can you tell me from which rom version did you replace wifi_supplicant?
Thanks.
maihuuquan said:
I downloaded it but I didnt update because some feedbacks seem bad with wifi.
However today I update it.
Very well.
Updated, I copy file "wpa_supplicant" to replace original file and my wifi is alright.
Thank you!
Sorry for my english so bad.
Click to expand...
Click to collapse
I use your rom v1.3
Oh Nice!! No random reboots so far with my rom?
maihuuquan said:
I use your rom
Click to expand...
Click to collapse
Only one time my tab reboot.
But I dont think its problem.
Just only one time.
But cannot use 3G
Thanks for the kernel, I can tell it is a definite improvement over the overcome. However, the old fix for market download cache in the init. D folder does not work anymore. Could you help look into it please ?
Sent from my GT-P1000 using XDA App
Please, post here a link to the fix so i will look into it.Thanks.
kaiser_tytnii said:
Thanks for the kernel, I can tell it is a definite improvement over the overcome. However, the old fix for market download cache in the init. D folder does not work anymore. Could you help look into it please ?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
InformationThis kernel is forked from the CyanogenMod Kernel and i have added a few additional changes of my own and more to come. My builds of AOKP and Gummy have this kernel pre-installed with the Kanged Gummy Kernel but when i release 1.0 it will have a few more tweaks so you would need to upgrade.
There will be 4 files you can download. The boot.img and zImage can both be flashed using Heimdall. The Flashable zip and Odin tar.
Bugs
Deep Sleep works but when using LiveOC it does not so i recommend only using this when playing games or maybe make a script to disable this when you device locks in the time being.
Differences
LiveOC
More Frequencies (100MHz, 200MHz, 400MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz, 1100MHz, 1200MHz, 1300MHz, 1400MHz)
Lulzactive v2 Governor (My preferred choice)
Tiny shmem
Working on more!
Using Features In The KernelLiveOCHere is information on it This is configurable using a tool known as NSTools on the PlayStore. When using this 100% means the bus frequency is at 100% try not to get confused. So 100% of 100MHz would be 100MHz so if you increase it to 120% so it would be 120% of 100MHz would be 120MHz and this value applies to all CPU frequencies, GPU ect.
LulactiveThis is like other governors for the CPU and can be configured using applications like Voltage Control, SetCPU, NSToolsand built-in tools from CM9/10 and AOKP ect.
Downloads
All Devices - http://goo.im/devs/henryedwardrose/Kernel/ICS
P1 - zImage - Boot.img - Flashable.zip - Odin.tar
P1L - zImage - Boot.img - Flashable.zip - Odin.tar
P1N - zImage - Boot.img - Flashable.zip - Odin.tar
Installation
zImage or boot.img
Use command line tool known as 'heimdall' (for people comfortable with the command-line)
Flashable.zip
Installed using CWM (the easiest methord)
Odin.tar
Put this file in the PDA section on Odin (Windows only)
Special ThanksThe TE4M - Nice work on developing the kernel and getting our device officially supported by CyanogenMod!
Dizgustipated - Nice Guy, Excellent Roms and Kernel!
Technomancer - The Guy who originally ported CM7 to our tab
SourcesMy Github
BuildingYou can build this kernel yourself in two ways
The First MethordIs by adding it into your manifest in your android build environment which supports integrated kernel building like CM9/10 and AOKP.
If you want it in your own Rom then simply just perform the regular build commands
If you just want to build a boot.img then apply the following commands
source build/envsetup.sh
lunch cm_p1-userdebug (change this depending on what device you would like to build)
make out/target/product/p1/boot.img
Click to expand...
Click to collapse
The Second MethordBefore the integrated kernel building system you used to build a kernel outside of this in it own separate environment so i have made it possible without have to download the android build environment to build any kernel for this device and you just have to run a build script and tell it what device you want to make.
Firstly you want to use the following commands
mkdir Kernel
cd Kernel
repo init -u https://github.com/henryedwardrose/Kernel_Manifest.git -b master
repo sync
Click to expand...
Click to collapse
Ok when synced you will see that there are three directories. Two of which are what you need. The 'Files' directory
is where all of the other files go that are necessary to build the kernel. The build.sh is a nice bash script which
you can open and easily understand what commands are being executed and how the files are being used.
Anyways here's how you build:
Firstly in the terminal go to the Files directory
cd Files
Click to expand...
Click to collapse
Now run this following command to extract the ramdisks (you only have to do this when i have uploaded a new ramdisk)
./RUNAFTERSYNC.sh
Click to expand...
Click to collapse
Then you want to build the kernel and at the end you will end up with the following flashable files 'zImage,
boot.img, .tar, .zip'
Now you need to initiate the building process
./build.sh
Click to expand...
Click to collapse
Now follow the commands on screen and you will end up with the kernel located in the out directory and you can flash
via Heimdall (zImage and Boot.img), Odin (.tar) and CWM (.zip)
Enjoy!
Thanks for you work...
Please build for all model (P1,P1l,P1N, P1C)..
a-vista said:
Thanks for you work...
Please build for all model (P1,P1l,P1N, P1C)..
Click to expand...
Click to collapse
oops! forgot this information lol :silly: Of course, well except for P1C atm
thanks for kernel. love your work bro.
i flashed on my p1. im trying and write back here for bugs etc.
can someone post some screen shots..???? PLEASEEE...
[email protected] said:
can someone post some screen shots..???? PLEASEEE...
Click to expand...
Click to collapse
ScreenShots from what???
This is a kernel, nothing changes visually...
Just performace, battery..etc..
hi
thanks again your work.
i tried kernel but it doesnt going into DEEP SLEEPtab working always 1200.
my options is smartassv2 and sio.
Used this kernel can be used camera 360 ?
It feels smooth indeed. Quadrant score at 1300 MHz with Cm9 is around 2600-2700.
Kernels includes CWM right? I wonder if I can have this on my P1000N stock GB 2.3.3.
Sent from my HTC Desire S
Hi henry.
My tab is p1000 and im on your aokp milestone 6 (not the rebuild 1). I decided to update my kanged gummy kernel to 1.0 as suggested in the op. I tried the zip for p1 using cwm recovery, and my tab was stucked to the samsung logo. Cant go to recovery too. So i decided to use the .tar in odin, and its now perfectly.
Just a heads up that there maybe something wrong with the zip version. But neverrtheless, thanks for this wonderful kernel!
I have a p1 too and i have download cwm file i have instal it with no issue.
Maybe a wrong download ?
@Henry,
with rebuild 1 kernel is the latest kernel or i have to redownload and install ?
Thank's
Hope someone can upload it to other sites. Rapishare really sucks.
Sent from my GT-N7000 using xda premium
MarlX said:
Kernels includes CWM right? I wonder if I can have this on my P1000N stock GB 2.3.3.
Sent from my HTC Desire S
Click to expand...
Click to collapse
Yes it does, yer you can and will install but it will NOT boot unless you have ICS on your device.
vince_junior said:
Hi henry.
My tab is p1000 and im on your aokp milestone 6 (not the rebuild 1). I decided to update my kanged gummy kernel to 1.0 as suggested in the op. I tried the zip for p1 using cwm recovery, and my tab was stucked to the samsung logo. Cant go to recovery too. So i decided to use the .tar in odin, and its now perfectly.
Just a heads up that there maybe something wrong with the zip version. But neverrtheless, thanks for this wonderful kernel!
Click to expand...
Click to collapse
Thank you for your report its always appreciated It has worked for me and i have a p1 but i will test it soon again to see if i have any issues
chickygamon said:
I have a p1 too and i have download cwm file i have instal it with no issue.
Maybe a wrong download ?
@Henry,
with rebuild 1 kernel is the latest kernel or i have to redownload and install ?
Thank's
Click to expand...
Click to collapse
There is no need to install it but if you install this one it won't hurt its the same.
Gpsrisk said:
Hope someone can upload it to other sites. Rapishare really sucks.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will upload it to goo.im soon but working on jb atm
henryedwardrose said:
I will upload it to goo.im soon but working on jb atm
Click to expand...
Click to collapse
Wow!
New Link
Hey, Uploaded All files to Here now;
http://goo.im/devs/henryedwardrose
Click to expand...
Click to collapse
enjoy!
henryedwardrose said:
Hey, Uploaded All files to Here now;
enjoy!
Click to expand...
Click to collapse
Something wrong with goo.I'm server. ?
Sent from my GT-P1000 using Xparent ICS Tapatalk 2
well this sucks all links are broken
tohno said:
well this sucks all links are broken
Click to expand...
Click to collapse
Goo.im are down atm i am going to upload them again when they are back up. In the mean time i am working on a few things and i may rebuild the kernel with gcc 4.6 check the op are the links still working on rapidahare?
Sent from my GT-P1000 using xda app-developers app
For those who have an UNLOCKED boot loader.
Kernel Stock+ is
= Sony latest ICS .55 kernel base
+ Auto-root with SuperSU
+ Init.d
+ Governor : Badass, Intellidemand, Interactive, Lagfree, Hotplug, Wheatley
+ I/O schedule : SIO, ROW, ZEN
+ elf extract (support recovery in FOTA partiton)
+ few tweak
+ OC to 1674Mhz(some version)
Stock+ V5.4.1 (OC)
- Over clock again to 1674MHz
- Port few lib, optimize from Open SEMC kernel
- Omit smartassv2 it cause my phone stuck at max frequently.
http://www.mediafire.com/download.php?hsma936uzlasgao
Stock+ V5.3 (Not OC)
http://www.mediafire.com/download.php?ohybzjcfu1ad6hc
- Update recovery TWRP 2.4.1
- Support elf extract so you are no longer tie to TWRP 2.4.1. Now you can update TWRP to the latest version or even install CWM. Check http://forum.xda-developers.com/showthread.php?t=2173202
- Fix Auto Root
- Remove PeqasusQ
- Add Lagfree, Hotplug, Wheatley
Stock+ V5.2 (Enable to Over Clock to match XSL speed)
http://www.mediafire.com/?4n0n5b04g76h8ew
- Change max frequency to 1674MHz
- Change RAM Disk to limit max frequency at 1512MHz
Stock+ V5.1 (update TWRP to V2.3.3.0)
http://www.mediafire.com/?ehkzz5lb59zgbxd
- New ramdisk structure. Now ramdisk split into two 1st for recovery and 2nd for Stock ICS boot.
- 1st ramdisk is ported from http://forum.xda-developers.com/showthread.php?t=2075562.
- 2nd ramdisk is exacted from sony stock kernel.sin merge with ramdisk from Advance Stock Kernel this should retain "autoroot" function and "init.d" support
Stock+ V2
link : http://www.mediafire.com/?vzpj4b6kpoa5zsl
This kernel feature
- build from .55 source + fix cache formatting issue
- little mod ram disk to set minimum frequency at 192000
- on demand tweak for better battery life.
- autoroot with superSU
- Xperia boot screen
Stock+ V1
Link : http://www.mediafire.com/?5sb5352k7pz5lc5
It is unmodified STOCK kernel extract from .55 kernel.sin plus CWM with auto root functionality.
I made a little mod to ramdisk to make it auto root with SuperSU instead of Superuser. The wifi module also replace with the one from stock firmware as well. The wifi module in Advance stock Kernel is not compatible with this kernel.
The kernel work just fine but I notice some bug when I try to format cache or wipe cache it will cause your cache partition corrupt. So if you like to use unmodified stock kernel please remember NOT wipe or format cache.
Well if you already wipe/format and want to get around the problem just simply install other kernel e.g. advance stock ICS17 or my stock mod kernel list above then format cache after that reinstall unmodified stock or you can leave it as it is.
Note.
- 28/01/13 : just found a bug regarding to setcpu and antutu set at boot not appear to set both core correctly. Please give No-frills CPU control or Kernel tuner a try but remember not to use with pagasusq.
- To install by fastboot just extract kernel.elf from the zip.
- Source is outdate because I can not upload a big file. I will update source as soon as I get proper internet connection.
- Now you can update TWRP to the latest version using goo.manager or even install CWM. Check http://forum.xda-developers.com/showthread.php?t=2173202
Feedback is appreciate.
Source :
- kernel http://www.mediafire.com/?b0nga11uw2syw2s
- 2nd Ramdisk http://www.mediafire.com/?9s7059o8g7fxubo
Credit :
championswimmer, Arakmar, cobrato
Mericon, DorimanX, Faux123, krabappel2548, Open SEMC
Can you make a flashable zip
Sent from hell using Xperia-S(atan)
mrsatan said:
Can you make a flashable zip
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
Sorry, I do not have enough knowladge. I'm just a noob. If you can point me to the right direction I will try to make it.
tosa.th said:
Sorry, I do not have enough knowladge. I'm just a noob. If you can point me to the right direction I will try to make it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1904615
You can use an existing kernel zip and add this to it.
Sent from hell using Xperia-S(atan)
Xsx version 6 is a good one to use
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
please verify and confirm..this flashable zip i made is composed of .55 firmware stock kernel, cwm and supersu v.97
I would used it if you used Superuser but you used SuperSU which is not so used friendly as Superuser.
jemju_xps-user said:
please verify and confirm..this flashable zip i made is composed of .55 firmware stock kernel, cwm and supersu v.97
Click to expand...
Click to collapse
I think this is different mate. The one you provide is not the real recovery. This is the same way people use for Locked boot loader. The recovery is locate in "system". If you format system you will loose it or if you install new ROM which has script to format system you probably loose recovery!!
Mine the recovery is not in system partition. It is loaded in ramdisk. You won't loose it even you format system.
Cheers.
tosa.th
darkerm said:
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
Click to expand...
Click to collapse
I disagree dude, SuperSU is way cool and easier and the eye""
Sent from South Africa using Sony Xperia S
darkerm said:
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
Click to expand...
Click to collapse
darkerm said:
I would used it if you used Superuser but you used SuperSU which is not so used friendly as Superuser.
Click to expand...
Click to collapse
I did it but for now it is in elf format. Please check first post.
You probably not need it because if you already rooted with ICS16 which come with superuser then the kernel will not reroot your system.
I'm still learning, could you please explain or give me some info about how you find user friendly of superuser? I read around here and lot of people said supeSU is quicker.
Cheers,
tosa.th
I am not a Dev but since my 1st Xperia NEO I have always used Superuser. I only once used SuperSu and its was last night When I was looking for a way to Root .55 of my Xperia S.
The used Interface it kinda messy and had a lot of option but in Superuser it just a few thing and easy to understand.
I don't know about others but As far as I know and Experienced most of the xperia user and even my friend use Superuser instead of supersu.
mrsatan said:
http://forum.xda-developers.com/showthread.php?t=1904615
You can use an existing kernel zip and add this to it.
Sent from hell using Xperia-S(atan)
Xsx version 6 is a good one to use
Click to expand...
Click to collapse
It easy more than what I thought. I spent hours messing around with zImage within cwm flash-able zip of ICS16.
Finally I figure it out. Please try the CWM version of this stock kernel in first post.
Cheers,
tosa.th
tosa.th said:
It easy more than what I thought. I spent hours messing around with zImage within cwm flash-able zip of ICS16.
Finally I figure it out. Please try the CWM version of this stock kernel in first post.
Cheers,
tosa.th
Click to expand...
Click to collapse
Testing now, so far all OK. Flashing worked, rebooted OK.
Sent from my LT26i using xda premium
darkerm said:
I am not a Dev but since my 1st Xperia NEO I have always used Superuser. I only once used SuperSu and its was last night When I was looking for a way to Root .55 of my Xperia S.
The used Interface it kinda messy and had a lot of option but in Superuser it just a few thing and easy to understand.
I don't know about others but As far as I know and Experienced most of the xperia user and even my friend use Superuser instead of supersu.
Click to expand...
Click to collapse
Supersu owns super user. Chainfire is the man
Sent from hell using Xperia-S(atan)
Someone needs to make a kernel with twrp. Anyone have a good kernel tutorial. I'll look into it.
Sent from hell using Xperia-S(atan)
mrsatan said:
Someone needs to make a kernel with twrp. Anyone have a good kernel tutorial. I'll look into it.
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
You may start from the link in my first post. It is for Acro S but it should give you an idea. There is an instruction in page 5.
I use kernel kitchen to unpack and repack kernel.
Cheers,
Tosa.th
tosa.th said:
You may start from the link in my first post. It is for Acro S but it should give you an idea. There is an instruction in page 5.
I use kernel kitchen to unpack and repack kernel.
Cheers,
Tosa.th
Click to expand...
Click to collapse
Cool, ill take a look when i get some time. Is kernel kitchen only for linux?
mrsatan said:
Cool, ill take a look when i get some time. Is kernel kitchen only for linux?
Click to expand...
Click to collapse
It suppose to work on windows but you will need cgywin. You also need some other software like phyton 7zip java etc. If you have Linux then it will be easy to install all those software.
Great work.
I have a unlock bootloader and Whit this kernel there is an increase of performance.
Now i have the stock. 55 and Whit the antutu and i have 8390
Whit cm10 i have 8900. I think this is a Great kernel.
Hi, I've just added this kernel to the Xperia S Development Index
Sent from my GT-I9100 using xda premium
Hello People
Since long time I have seen many people struggling and requesting someone to share GREAT devil kernel.
*****And here I came**** So I requested DerTeufel1980 and luckily he accepted to share the kernel
without compiling from source i.e. by extracting from his supersonic HellyBean ROM.
That is enough talk
How to install
1-Make sure you run JB 4.2 with stock CM partitioning.
2-Reboot into recovery.
3-Choose kernel zip and flash.
4-For better performance wipe cache & dalvik cache.
N.B. I don't make any modifications to the kernel, I just extract the kernel and share it.
Kernel Source : https://github.com/DerTeufel/samsung-kernel-aries
Features
1. Linux Kernel 3.0.83
2. Normal OC Support ( 1200 , 1300 and 1400MHz steps )
3. Live OC Support ( up to 150% )
4. Voltage Control support
5. ZRAM Support
6. SWAP Support
7. KSM Support
8. Dynamic FSync Support
9. RAM Choice ( 382 , 395 , 408 , 439MB , with auto patching of Bigmem libs )
10. CPU Governors - performance , powersave , userspace, ondemand , conservative , interactive , smartassv2, lazy , lagfree, minmax, lulzactive, wheatley
11. IO Schedulers - noop , row , cfq , zen , deadline , zen , sio
12. XZ Compression support.
13. Devil CWM v 6.0.3.0 Semi Touch Recovery.
14. BLN support.
Latest version Changelog
+ update to Linux 3.0.83
+ update i/o schedulers from Linux 3.4
+ added fiops v2 i/o scheduler
Credits
DerTeufel1980
patwip
stratosk
aways
ts1506
Bejda
kasper_h
For those who want to theme it further Bejda made a Device bootsplash here...
(kasper_h style)
If you liked the kernel please consider a donation to DerTeufel1980 and a thanks button for me and him.
Download link :- 24062013 http://www63.zippyshare.com/v/16354404/file.html/
For bug reports please don't over pollute his ROM thread and report over here and I'll test it with HellyBean and report it to him
Kernel will have the same date tag as the ROM version it is extracted from.
First, so every hellybean release? Also it would be great if you provided deviltools as well.
Press thanks if I helped you
Famzz said:
First, so every hellybean release? Also it would be great if you provided deviltools as well.
Press thanks if I helped you
Click to expand...
Click to collapse
Will upload a new version tonight with devil tools already included in system/app
Edit : no it will be better if I included it in data/app so that you're free to delete it or keep
Sent from my GT-I9000 using xda premium
Better as /data/app I think too cause you know there's that issue with NsTools that sometimes needs a fix perms to give access to governors settings.. Well the fastest way to fix perms on DevilTools is to use fix permissions apps from market and apply fix perms on it only but the app won't see DevilTools if installed as system/app.
It's about the same but will just spare a reboot to recovery,check that system is mounted, fix permissions,wait....or use RomManager which with the fix perms process will be little long too.
Why not do the whole fix perms by using RomManager or going to recovery, Mount all partitions and apply while we're on it but as it's not mandatory better have choice.
Can we also report bug's ?
Because wifi isn't working here with devil kernel and the latest cm nightly.
And of course thank you very much fort making the kernel accesible
Sent from my GT-I9000 using xda app-developers app
OP updated with devil tools
Install as normal apk
FREEKR said:
Can we also report bug's ?
Because wifi isn't working here with devil kernel and the latest cm nightly.
And of course thank you very much fort making the kernel accesible
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Edit : Of course you can report bugs
Anyone else please ?
+1,Wifi no working.
ahmadashraf said:
Edit : Of course you can report bugs
Anyone else please ?
Click to expand...
Click to collapse
You need to extract the /system/lib/modules folder from hellybean into your current system to get WiFi with Devil Kernel. Consider updating the zip.
ts1506 said:
You need to extract the /system/lib/modules folder from hellybean into your current system to get WiFi with Devil Kernel. Consider updating the zip.
Click to expand...
Click to collapse
Will do it now thanks man
Sent from my GT-I9000 using xda premium
lol welcome bro
aways said:
lol welcome bro
Click to expand...
Click to collapse
Before thanks ?! Hahah
Edit: Sorry forget to include you in the thanks list you made me jealous from your thanks metre and the hundreds of development threads you have
Sent from my GT-I9000 using xda premium
aways said:
lol welcome bro
Click to expand...
Click to collapse
+1:good:
ph.miki said:
+1:good:
Click to expand...
Click to collapse
Thanks your ROM is really extra ordinary BTW awesome look and performance and battery life
Sent from my GT-I9000 using xda premium
ahmadashraf said:
Thanks your ROM is really extra ordinary BTW awesome look and performance and battery life
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks bro.
@ahmadashraf,
system/lib/hw/lights.aries.so too,for bln
Thanks to ts1506
OP updated with new version
Hope wifi is now working
Testers please !!
Bejda said:
@ahmadashraf,
system/lib/hw/lights.aries.so too,for bln
Click to expand...
Click to collapse
OK done but still not uploaded
anything else ?
ahmadashraf said:
OK done but still not uploaded
anything else ?
Click to expand...
Click to collapse
No, that should be all
Modules and bln lib as Devil provide bln support by dedault.
Thanjs for the topic.
Bejda said:
No, that should be all
Modules and bln lib as Devil provide bln support by dedault.
Thanjs for the topic.
Click to expand...
Click to collapse
Thanks
Added you to the thanks list
Sent from my GT-I9000 using xda premium
Here it is:
CM Kitkat 4.4.4 Change Log:
http://faux.romhost.me/n1/kk44/changelog.txt
Cyanogenmod Edition Kernel: Compatible with CM 11 ROMs
http://faux.romhost.me/n1/kk44/
Betas:
http://faux.romhost.me/n1/beta/
CWM Installable:
Instructions: (Pre-requisite: CWM recovery or equivalent)
1) Reboot to Recovery
2) Select "install zip from sdcard"
3) Choose zip from sdcard
4) select n1-kk-kernel-xxx.zip
5) select yes
after flash
select reboot system... DONE!
GPL compliant source:
Kitkat 444 source: https://github.com/faux123/android_kernel_oppo_n1
Video Review of FauxClock by hackarchive!
reserved 1
reserved 2
reserved 3
can i install it with twrp
faux123 said:
Here it is:
CM Kitkat 4.4.2 Change Log:
http://faux.romhost.me/n1/kk44/changelog.txt
Cyanogenmod Edition Kernel: Compatible with CM 11 ROMs
http://faux.romhost.me/n1/kk44/
Betas:
http://faux.romhost.me/n1/beta/
CWM Installable:
Instructions: (Pre-requisite: CWM recovery or equivalent)
1) Reboot to Recovery
2) Select "install zip from sdcard"
3) Choose zip from sdcard
4) select n1-kk-kernel-xxx.zip
5) select yes
after flash
select reboot system... DONE!
GPL compliant source:
Kitkat 442 source: https://github.com/faux123/android_kernel_oppo_n1
Video Review of FauxClock by hackarchive!
[/QUOTE
I am on twrp recovery and omnirom... Can i flash it? Thanks for the kernel
Click to expand...
Click to collapse
giuliano rigon said:
faux123 said:
Here it is:
CM Kitkat 4.4.2 Change Log:
http://faux.romhost.me/n1/kk44/changelog.txt
Cyanogenmod Edition Kernel: Compatible with CM 11 ROMs
http://faux.romhost.me/n1/kk44/
Betas:
http://faux.romhost.me/n1/beta/
CWM Installable:
Instructions: (Pre-requisite: CWM recovery or equivalent)
1) Reboot to Recovery
2) Select "install zip from sdcard"
3) Choose zip from sdcard
4) select n1-kk-kernel-xxx.zip
5) select yes
after flash
select reboot system... DONE!
GPL compliant source:
Kitkat 442 source: https://github.com/faux123/android_kernel_oppo_n1
Video Review of FauxClock by hackarchive!
[/QUOTE
I am on twrp recovery and omnirom... Can i flash it? Thanks for the kernel
Click to expand...
Click to collapse
I've only tested with CM 11.. so I can't say if other alternatives would work or not.
Click to expand...
Click to collapse
faux123 said:
giuliano rigon said:
I've only tested with CM 11.. so I can't say if other alternatives would work or not.
Click to expand...
Click to collapse
OK.. I will try it with cm11 but would you flash it with twrp recovery? I would flash cm 11 set up reboot to twrp recovery and flash your kernel .. Or is cwm recovery necessary? Thanks for your time
Click to expand...
Click to collapse
giuliano rigon said:
faux123 said:
OK.. I will try it with cm11 but would you flash it with twrp recovery? I would flash cm 11 set up reboot to twrp recovery and flash your kernel .. Or is cwm recovery necessary? Thanks for your time
Click to expand...
Click to collapse
Either recovery should work
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
faux kernel fails on omni and codefireX
_r2 version is out. Updated cm ramdisk for compatibility. No source changed.
Sent from my One X using Tapatalk
faux123 said:
_r2 version is out. Updated cm ramdisk for compatibility. No source changed.
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
So r1 did not work on omni ROM or codefirex.. No news on aokp.. Do you think release 2 is more compatibile or should we stick with cm11 thanks giuliano rigon
giuliano rigon said:
So r1 did not work on omni ROM or codefirex.. No news on aokp.. Do you think release 2 is more compatibile or should we stick with cm11 thanks giuliano rigon
Click to expand...
Click to collapse
I DON'T HAVE this device. I released this kernel because CM has unified the kernel source for N1 and Find5. So this kernel is effectively free as result of it. The support will be very minimal for this kernel.
faux123 said:
I DON'T HAVE this device. I released this kernel because CM has unified the kernel source for N1 and Find5. So this kernel is effectively free as result of it. The support will be very minimal for this kernel.
Click to expand...
Click to collapse
It seems like the n1 panel and the gamma/temperature changes, doesn't work well together. Makes weird colors on screen, like out of no where a part if the screen is more blue, and sometimes it turns all colors very bad. Everytime it needs a hard reboot to get it rolling. Just a note for you
Sent from my Find 5 using XDA Premium HD app
anders3408 said:
It seems like the n1 panel and the gamma/temperature changes, doesn't work well together. Makes weird colors on screen, like out of no where a part if the screen is more blue, and sometimes it turns all colors very bad. Everytime it needs a hard reboot to get it rolling. Just a note for you
Sent from my Find 5 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for the feedback. There's no way for me to troubleshoot this said issue at all. I don't have this device.
Sent from my XT1053 using Tapatalk
faux123 said:
Thanks for the feedback. There's no way for me to troubleshoot this said issue at all. I don't have this device.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
No I know and kmsg or logcat says nothing bad when it happens.
Sent from my Find 5 using XDA Premium HD app
anders3408 said:
No I know and kmsg or logcat says nothing bad when it happens.
Sent from my Find 5 using XDA Premium HD app
Click to expand...
Click to collapse
kernel FB/GPU drivers are identical to find5, the only difference are in the actual mipi drivers specific to N1''s display. But without device in hand, it is impossible to debug (even with logs and such).
faux123 said:
kernel FB/GPU drivers are identical to find5, the only difference are in the actual mipi drivers specific to N1''s display. But without device in hand, it is impossible to debug (even with logs and such).
Click to expand...
Click to collapse
Yes I know doing android in blind ain't easy
Sent from my Find 5 using XDA Premium HD app
kernel 002u is out!
details here:
https://plus.google.com/u/0/109078966818501160423/posts/5GP7DrnW8Gc
Enjoy!
Could someone give me the default governor settings for intelliactive please?
I'm getting random stuttering while playing back youtube HD video from the app, only while using this gov, and I'd like to put back in the default settings through trickster, but don't know where to find the default values
Screen cap works just fine :good:
yeah i try right now