T999 to Metro - T-Mobile, Samsung Galaxy SIII

I have an S3 rooted with 4.3.
I have a Metro PCS sim which I am trying to use with this phone.
The phone seems able to read the sim OK.
Under status I can see my phone number.
Everything else is unknown. Network is unknown, Mobile network type is unknown, service state is out of service.
I get full signal too, but when I go to mobile networks, I receive a message "Insert SIM card to access network services"
So I can see my phone number, and I dont have a message telling me to insert sim when I start the phone.
I have checked with Tmobile and I know the phone is not black listed, but when I make a call I get not registered on the network.
I do see also my IMEI number and seems to be correct under about
I really dont know where else to look for answers. I would love some help with this.
Any ideas?

Anyone?

Do you have the 4.3 modem? And also did you add the device to your line? Otherwise it won't work no matter what you do
Sent from my SGH-T999 using Tapatalk

serio22 said:
Do you have the 4.3 modem? And also did you add the device to your line? Otherwise it won't work no matter what you do
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
The Baseband version is T999UVUEMJC.
I tried to add this phone by contacting Metro, and they told me that they couldn't because the phone is locked. I contacted T-mobile, and the person sent a request to get it unlocked, and said that I should wait 72 hours to hear from someone. I waited more then 72 hours, and I called T-mobile again, and then I was told that I needed to have service before they could unlock the phone. I was not sure if that was the issue since the phone did not give me the invalid sim card error.
I went to Metros site to see if I can check the IMEI. Their system said the phone was lost or stolen. I called T-mobile to check on the IMEI, and they told me its fine and there are no blocks, and ready to activate.
I also confirmed the status using both Swappa, and checkesnfree. They both say the phone is ok. I would think just using the Sim should work, but I am not sure what to believe.

Ok there are 2 things you need to do.
1) update your modem to a 4.3 modem
2) add the device to your line.. Just swapping sim cards will not work. It also doesn't need to be unlocked.. Any T-Mobile phone will work with metro as long as its in a gsm market, so you might want to try doing it again.. I worked at metro so that's how I know all this
Edit: never mind you do have a 4.3 modem my mistake for reading too quickly.. But it looks like you're set to go, you just need to add the device to your line, so try adding it again
Sent from my SGH-T999 using Tapatalk

Related

need help figuring this out with my sim

i have the gt-i9250 and i always used an at&t sim with it with out an issue, recently i wanted to switch to t-mobile (thinking the phone should be unlocked considering it was an international phone and was the yakjuxw than i flashed it to yakju which was wierd cause i had google wallet on it and it was working fine although i only thought it was compatible with takju, but anyway all and all i put it to the usa firmware of takju 4.0.4 not going to jellybean yet, but my issue is that i am not able to use the t-mobile sim card in it and i get this (look at screenshot where signal is) what does this mean and how come i cant get signal, when i go to settings and mobile networks it shows me the apn for t-mobile us but not selected so i select it than after i go to mobile networks and it shows t-mobile and at&t and when i click any of them they tell me its unable to connect and it cant connect to the network at this time, so what would this mean and how would i fix it so that i can use it with my t-mobile sim card, also i flashed the newer NA radio uglc1.
That is weird. It should work on either of them. It just means you have no signal. That is strange. You could've actually just popped the Sim right in. It didn't matter if you were using a ROM
Sent from my Galaxy Nexus using xda app-developers app
Is the SIM activated for sure? I know when I switched to the T-mobile $30 plan it took it a good 15 minutes or so to activate, and then I didn't actually get signal until rebooting the phone for whatever reason.
Did you reboot your phone?
Although you can sometimes hot plug a sim card by turning on flight mode, taking the sim card out and toggling flight mode a few times, it won't work sometimes.
probably your cell imei not free and therefore can not change your sim.
There is an application called "****docomo" worth to release the imei. Make a backup just in case
https://www.dropbox.com/s/mcg9gtn1ei85357/FuxkDocomoV3.1.apk
yosula said:
probably your cell imei not free and therefore can not change your sim.
There is an application called "****docomo" worth to release the imei. Make a backup just in case
https://www.dropbox.com/s/mcg9gtn1ei85357/FuxkDocomoV3.1.apk
Click to expand...
Click to collapse
Don't think he has a SIM unlock problem. Considering that it was working with AT&T, which never had a locked version of the GNex, I think he's having another issue.
I'd tell the OP to make 100% sure that his new T-Mobile SIM is activated and not defective, then try a few reboots and swaps back to the old SIM and do some troubleshooting. If it's the phone and not the SIM, its likely a mobile network registration error or an APN issue.
Looking in the notification bar, it seems like the phone doesn't think there's even a SIM inserted. Make sure you didn't damage a pin in the SIM tray, and that the SIM is properly inserted and clean. I don't think you'd get this error of "no SIM" if your phone was locked. If that was the case, the phone would recognize the SIM and prompt for an unlock code, which you're not getting.

Phone Signals

I have a canadian based S3 I747 and its unlocked (any sim card i insert it wont ask for the unlock code). However, no matter what i do... (root, update a non carrier rom, carrier rom, reset settings, install cwm radios posted in xda) the phone will not get any signal strength.
The imei is showing... however the signal strength is 0dBm 99 asu... I cant even dial 911 it will say mobile network not available..
Any solution to this will be grately appreciated... i will gladly buy you a coffee or a ham burger...
Thanks,
How did you unlock your device?
Does this happen even with the stock ROM and whatever SIM you were using before you unlocked the device?
Do you have an appropriate network operator set in Settings -> Other -> Mobile network settings -> Network operators (automatic might work in this case), and a matching APN?
Just trying to get a sense of what might be causing this...
Maybe a hardware issue?
smelenchuk said:
How did you unlock your device?
Just trying to get a sense of what might be causing this...
Click to expand...
Click to collapse
Does this happen even with the stock ROM and whatever SIM you were using before you unlocked the device?
I bought this phone from someone and stupid me didnt check at the time... i have tried every sim there is present in toronto, canada... and still no luck...
Do you have an appropriate network operator set in Settings -> Other -> Mobile network settings -> Network operators (automatic might work in this case), and a matching APN?
It shows the apns automatically once i put the sim card... like Bell or Rogers settings are shown in APN automatically....which means it reads the sim cards but doesnt register on any network... no bars... just a do not enter like symbol.....
y0yerrj0sh said:
Maybe a hardware issue?
Click to expand...
Click to collapse
How to find that out...
One thing that i have noticed is that the serial number from the phone behind the back is not the same as the serial number shown in status settings of the phone....
i really would not know it's not really my area i think smelenchuk might help better. Sorry i couldn't be more help.
ysr84 said:
One thing that i have noticed is that the serial number from the phone behind the back is not the same as the serial number shown in status settings of the phone....
Click to expand...
Click to collapse
Sorry please ingnore this as the serial number was changed when i installed cyanogenmod... when i put stock rom the serial number is back to thr same as the sticker behind the phone...
I'm not really an expert on this either, but I'm going to guess one of two things is going on:
1) The phone isn't as unlocked as advertised - perhaps something went wrong with the unlocking process and shot the modem firmware. You'd need to figure out what network the phone was originally on to figure that one out, though. (Which reminds me - what baseband is your phone running right now? You might try something else from here - and make really sure you're using a Canadian baseband!)
2) Something was wrong with the phone long before it was ever sold to you, be it bad hardware, a bad IMEI (stolen phone?), etc. - the whole description of "bought my phone from someone" just sounds suspicious to me when you put it like that.
Honestly, I hope it's a modem firmware issue (I think if it was something to do with the IMEI and the like, you wouldn't be seeing those strange signal strength numbers).
EDIT: Here's a fun fact: when I unthinkingly flashed the broken CM10.1 12/28 build this morning (broken in that it refuses to communicate with the baseband), I saw exactly the same strange signal strength numbers. This leads me to believe that you are indeed facing a trashed baseband and/or an empty IMEI number, so check those out!
ysr84 said:
I have a canadian based S3 I747 and its unlocked (any sim card i insert it wont ask for the unlock code). However, no matter what i do... (root, update a non carrier rom, carrier rom, reset settings, install cwm radios posted in xda) the phone will not get any signal strength.
The imei is showing... however the signal strength is 0dBm 99 asu... I cant even dial 911 it will say mobile network not available..
Any solution to this will be grately appreciated... i will gladly buy you a coffee or a ham burger...
Thanks,
Click to expand...
Click to collapse
You could fix your s3 ?? I have the same problem

Can't find network, no data, WiFi works fine though.

Got this phone with the problem already, I installed a custom ROM hoping that would fix it but still doesn't work.
Cannot find network, though it is showing 3 bars?
Can't make calls, can't use data.
WiFi works just fine.
EDIT: Should probablly give some more info:
T-Mobile model
ROM: CleanROM A.C.E.
SIM card works fine in my other phone.
EDIT2: Ok so after more fiddling I got it to pick up a signal from AT&T with the "Find Network" search. I'm thinking this has been locked to AT&T and I just need to flash back to a stock ROM and unlock it, thoughts?
I know I get T-Mobile signal at my house my other phone picks it up just fine and I'm using the same exact SIM in both.
epicelite said:
Got this phone with the problem already, I installed a custom ROM hoping that would fix it but still doesn't work.
Cannot find network, though it is showing 3 bars?
Can't make calls, can't use data.
WiFi works just fine.
EDIT: Should probablly give some more info:
T-Mobile model
ROM: CleanROM A.C.E.
SIM card works fine in my other phone.
EDIT2: Ok so after more fiddling I got it to pick up a signal from AT&T with the "Find Network" search. I'm thinking this has been locked to AT&T and I just need to flash back to a stock ROM and unlock it, thoughts?
I know I get T-Mobile signal at my house my other phone picks it up just fine and I'm using the same exact SIM in both.
Click to expand...
Click to collapse
Maybe someone has flashed a wrong modem/rom on the phone so it ruined everything..
You said it's T-Mobile phone.. I guess it's gotta be locked to t-mobile..
I would suggest to post this on T-Mobile Note 2 forum.. They would know a way to solve your problem.. This forum is for international note 2..
Sent from my GT-N7100
epicelite said:
Got this phone with the problem already, I installed a custom ROM hoping that would fix it but still doesn't work.
Cannot find network, though it is showing 3 bars?
Can't make calls, can't use data.
WiFi works just fine.
EDIT: Should probablly give some more info:
T-Mobile model
ROM: CleanROM A.C.E.
SIM card works fine in my other phone.
EDIT2: Ok so after more fiddling I got it to pick up a signal from AT&T with the "Find Network" search. I'm thinking this has been locked to AT&T and I just need to flash back to a stock ROM and unlock it, thoughts?
I know I get T-Mobile signal at my house my other phone picks it up just fine and I'm using the same exact SIM in both.
Click to expand...
Click to collapse
*#06 etc to get your imei display on the phone. Check imei matches with imei number underneath the battery. If they match and apeears to be valid you may have a locked or blacklisted phone. Blacklisted means its imei blocked nationally due to fraud such as lost stolen and insurance replacement provided etc.
Good luck
Sent from my GT-N7100 using xda app-developers app

[Q] Enable Mobile Hotspot on Unlocked ATT Galaxy Note 2

We have a Galaxy Note 2 from ATT now. Just upgraded, so we're not using it. We want to take it to Europe to use as a phone and a hotspot for our computers on our trip. I've read that people do that with unlocked Androids and a European SIM.
I was able to unlock the phone with no problem using a data only T-Mobile SIM card in the process. The problem is that I can't turn the Mobile Hot Spot on. I've tried with the valid data only T-mobild SIM installed. When I try to turn the hotspot on, it says that either the network is not available, or there's an invalid SIM. I'm worried that it's the ATT restrictions on the phone that aren't going away even if the phone is unlocked, and there's a different SIM in place.
Does anyone know what we have to do to enable the hotspot, so that this phone can be used in Europe?
Thanks.
Try with wifix.apk
androidlabs said:
Try with wifix.apk
Click to expand...
Click to collapse
Thanks. That looks like a good app to fix problems connecting to external wifi sources. However, I want my phone to BE the wifi source when in Europe. Still looking for a solution.
artbytes said:
Thanks. That looks like a good app to fix problems connecting to external wifi sources. However, I want my phone to BE the wifi source when in Europe. Still looking for a solution.
Click to expand...
Click to collapse
Sorry my bad you should go for foxfi.apk to fix locked wifi and usb tetharing and its tested by me (if it doesn't work for u then there are several more apks. search). Good luck
artbytes said:
We have a Galaxy Note 2 from ATT now. Just upgraded, so we're not using it. We want to take it to Europe to use as a phone and a hotspot for our computers on our trip. I've read that people do that with unlocked Androids and a European SIM.
I was able to unlock the phone with no problem using a data only T-Mobile SIM card in the process. The problem is that I can't turn the Mobile Hot Spot on. I've tried with the valid data only T-mobild SIM installed. When I try to turn the hotspot on, it says that either the network is not available, or there's an invalid SIM. I'm worried that it's the ATT restrictions on the phone that aren't going away even if the phone is unlocked, and there's a different SIM in place.
Does anyone know what we have to do to enable the hotspot, so that this phone can be used in Europe?
Thanks.
Click to expand...
Click to collapse
The thing that sticks out to me is that you actually need the correct Sim card that is provisioned for phone service.. I'm assuming this "data only sim" was provisioned for a tablet and therefore can't make any calls... the network unavailable message will show up even with no Sim installed and trying to enable a hotspot. You need a valid cell service in order to hotspot.
Hope Getting the Right SIM will do it.
getyroks said:
The thing that sticks out to me is that you actually need the correct Sim card that is provisioned for phone service.. I'm assuming this "data only sim" was provisioned for a tablet and therefore can't make any calls... the network unavailable message will show up even with no Sim installed and trying to enable a hotspot. You need a valid cell service in order to hotspot.
Click to expand...
Click to collapse
Thanks. I hope that's what the problem is. It would make things simpler to be sure. I just didn't want to get there and then find out it wasn't going to work. In the meantime, I found my old Galaxy S 3. I managed to unlock it, root it, and install basic ROM. Thought maybe that would work, as well. I'll know by next week.

Phone Stuck Showing "Searching / No Service"

Hello all. I purchased a edge+ today but whenever I insert a sim, the phone stays on searching. I made sure that I rebooted the device and I also tried re-seating the sim many times. I believe the device is unlocked and the imei/esn is in clean standing with T-Mobile. I tried a MetroPCS sim card and it stayed on searching, same thing happened with a Verizon sim. However when I inserted the T-Mobile sim, it sometimes says no service but ever since I rebooted the device, it stays on "searching" no matter which sim is installed. I find this whole ordeal frustrating since the signal bars show up for the MetroPCS and T-Mobile sim but with Verizon nothing happens. Any help would be greatly appreciated.
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
knite75 said:
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
Click to expand...
Click to collapse
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
gazasalim said:
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
Click to expand...
Click to collapse
knite75 said:
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
Click to expand...
Click to collapse
Yeah I know they are which baffles me as to why it isn't working. I tried adding a custom APN but same thing happens. I get calls/sms on WiFi but if I turn it off I get "No Service"
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
erick161 said:
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I went and it turns out the device is blacklisted. This whole time I was rolling with the imei in the phone, after checking last night, I noticed that the imei on the back of the device differs from the one that's actually on the software. I was able to get in touch with the seller and he's coming back to give me my money back. Guess a mod can mark this thread closed.

Categories

Resources