Develop Bugs

Clingo Universal Hands-free mount review.

I went ahead and purchased the clingo car mount
http://www.clingo.com/car-mounts/universal-hands-free-mount/
for $25 shipped off of eBay (find it yourself) after it was mentioned by a member on XDA. It looked cool to me and since I didn't enjoy my Soundgate M2 mount to much I decided to give it a try.
I must say that I am very happy with the purchase. It works flawlessly with my EVO. I have tried it with two different cased, one was a regular tpu style and then with this case http://www.amazon.com/High-Quality-...?ie=UTF8&s=electronics&qid=1281911569&sr=8-1\
I'm not sure what material its made from but it is comparable to leather.
Both cases worked perfectly. They stuck to the Clingo adhesive without any problems and most importantly, they stayed there. A naked EVO will work just as well.
I have had the mount only for a couple days, but so far I have driven relatively long distances without no issues whats-so-ever. I live in houston tx btw, it's 5:35 rite now and 97* degrees outside, just to give you an idea of my environment.
The adhesive on the clingo does not seem to be losing its stickiness at all after my first couple days. I found this on clingos website.
http://www.clingo.com/articles/technology
If those are true facts then you can expect this baby to last a while...
Installation was extremely easy. I have mine attached to my windshield and it sticks to it like a champ. There is an optional attachment that allows you to stick it to your car dash board which works very well also.
overall I HIGHLY recommend this product if your looking for a decent car mount and in all honestly if I was to buy a home dock for the EVO I would get another clingo. It's so simple yet practical.
I know with all these knew docks coming out from htc/sprint/eBay/wireforless nobody really considered getting a Clingo product, but you can find them for relatively cheap off of eBay and it seems like it would look nice in an office/home environment. talking about this btw http://www.clingo.com/home-and-office/universal-podium
this seems pretty neat also, might scoop it up once I get some extra cash.
http://www.clingo.com/home-and-office/parabolic-sound-sphere
I dont see a need to spend 50+ on a dock just because it charges your phone. You can get a couple spare batteries, a car charger, home charger, usb cable and screen protectors for under 20 off of eBay. That matched with a Clingo product is all I need.
P.S - I suck at writing reviews. This is just my attempt to help some fellow xda members make a decision on an accessory for there phone. If your coming here to hate on my grammar and the way I type (which i have seen A LOT of lately on XDA. Must be the summer heat or something) then troll on my friend.
Oh yeah! and if you guys want a video of the mount just let me know. Only problem is my EVO is my video recorder, but I can still go ahead and try it if ya'll want.

Thanks for the review! I was actually just on their website before I came across your post. (Its actually still open in another window lol.) Can you comment on the amount of weight it can support based on its area? I know some of the pads for the phone were pretty big, but other were smaller circles. Do you think the smaller ones would be able to support our Evos?

"It’s pretty simple, really. Clingo holds your phone. It doesn’t matter if it is a BlackBerry, iPhone, Droid, Samsung, or whatever. Whether in your car, at the office, at home, or wherever - Clingo holds it."
That's a statement from the clingo website. That is for all there products except for the little necklaces which are designed specifically for iPod nanos. So according to them any of there products should be able to support any mobile device, including our EVOs.
From my experience, which is still limited, it really doesn't seem like too much surface area is necessary to grip the phone. Also, all the "Universal Products" seem to have the same surface area and shape. They only have two products that I can see with smaller surface area. One is the nano necklace and the other is the parabolic sounds sphere....
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.

starplaya93 said:
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
Click to expand...
Click to collapse
He stated the arm came down a bit, the phone itself stayed put on the holder, but the entire assembly (ball joint) rotated down a bit.

ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.

starplaya93 said:
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
Click to expand...
Click to collapse
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.

I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount

hx3 said:
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
Click to expand...
Click to collapse
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?

dmc971989 said:
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
Click to expand...
Click to collapse
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.

starplaya93 said:
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
Click to expand...
Click to collapse
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.

starplaya93 said:
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
Click to expand...
Click to collapse
Oh I have absolutely no doubt that it will amplify sound, im just not sure how much louder it will make things... or if its going to have any strange/****ty frequency response

hx3 said:
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
Click to expand...
Click to collapse
In other words it goes from this | to this /
Take a black zip tie, wrap it around the back where the ball goes into the socket and cinch it down some, may be just what you need to add that bit of extra grip.

Great review.. I have the car dock, the tethering pad and the sound sphere on the way.. should be here today.

Well, all my stuff showed up. The parabolic sphere is pretty cool. It does increase the volume somewhat and maybe add a little reverb to the noise. The tethering pad is okay as well.
The car dock, however, sucks. It would probably be great on a lighter phone. So far my Evo has fallen off 3 times and seems to slide around on the pad. Pretty disappointing.. looks like my quest for a good car dock will continue.

Well, Ive done everything I could do to make the car mount work and it just wont. The design is poor and it reflects in the performance of the dock. My dock will not stay where I put it, instead sagging down and eventually dropping the phone. Ive tried everything short of wire tieing it in place (Yay for ghetto engineering) and I cant make it stay. Ive tried zip tie around the neck of the mount, stuffing tape into the ball and socket, etc.. nothing helps. Guess this one is going to end up in the trash pile too along with every other Evo mount Ive bought.

If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.

VW91N3 said:
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
Click to expand...
Click to collapse
Well, its not just that. The Evo IMO doesnt stick to the pad very well. Maybe its the oil from my hands but I had to put a plastic case on the phone just to get it to stick. For a Nexus one or something, it probably would be great. The Evo is just too much of a beast for this mount.
On a side note, I emailed Clingo about calling me regarding this mount. Its been 2 days and no call back. Another strike against Clingo.

The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson

bhtoque said:
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
Click to expand...
Click to collapse
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.

starplaya93 said:
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
Click to expand...
Click to collapse
I have not used the rubber band trick on my Clingo, as the zip tie stopped the droop, but I've done it with similar ball joints. You should be able to find a small bag of rubber bands at your local office supply big box. One about 1/4" wide should do with the clingo. Just cut a piece out of the band and put it into the socket as close to on-center as you can. Line up the ball on the clingo's arm so that the mount pad will be close to the angle you want it, and snap the pieces back together. The rubber will provide grip, and provide enough to stop any drooping while still allowing you to reposition and swivel the mount head.
JAson

S4 Active car/ bike/ Motorcycle holder (dedicated)

Hi all,
just e tip: a dedicated carholder for this phone is ahrd to find and a little expensive if i'm honest.
if you search for a dedicated carholder form LG G2 on Ebay or such, this will do just aswell. mind you, with a little creative puzzling.
the size between these phones is comparable....not EXACTLY the same.
i've taken a light and heated the corners and the 'clipping and unclipping thingy' without the phone in it one by one.
After heating, fitted the phone in and pressen on the each corner-part and pushed the holder around it.
It fits pretty good and will not snap out easliy.
be careful after applying a heat source......ths plastic can be VERY HOT. insert phone and press it onto a surface.
no promises on the result ofocurse.....just thought i'd share it........

I just wanted to add that I went a different direction with this, and it works great.
I bought a http://www.amazon.com/SUPCASE-Samsung-Galaxy-Active-Unicorn/dp/B00DY2SEFE
Then I bought the quadlock mounts
The adapter for the phone
http://www.quadlockcase.com/products/universal-adapter
then bought the bike mount
http://www.quadlockcase.com/products/quad-lock-bar-mount-pro
and car mount
http://www.quadlockcase.com/products/quad-lock-car-mount
I attached the universal adapter to the back of my phone (easy easy compared to the otterbox stuff out there, since unicorn beatle case is uniformly flat already, it is why i chose it)
Now i attach it to my bike/car when I need to, and it doesnt make it too much bulkier. I actually have 2 cases, one with and one without the adapter, and I switch them out if I am going to go biking, or on a long trip where I might use the GPS.

there are really stable BikeMounts from Upmove:
http://www.upmove.eu/samsung-galaxy-s4-active-fahrradhalterungen/705j43k34u55.html

Car mount... vent vs dash?

I'm looking to get a car mount for my Nexus 5, but I'm not sure which style to go with. My dad has the Aduro u-grip and likes it, but he says it has fallen off his dash a couple times. He doesn't use the 3M tape though, so I imagine that could stick it more permanently.
http://www.amazon.com/Aduro-Univers...GLF8/ref=sr_1_2?ie=UTF8&qid=1405607983&sr=8-2
I've also seen options that fit on your vent.
http://www.amazon.com/Kenu-Airframe...1B4W/ref=sr_1_1?ie=UTF8&qid=1405608084&sr=8-1
The vents in my car are fairly close together, so I'm a little concerned about that fitting.
I haven't really seen many of the traditional windshield mount options, but I never had much success with those sticking well anyway.
Any thoughts on the two I posted plus other possibilities?

raptir said:
I'm looking to get a car mount for my Nexus 5, but I'm not sure which style to go with. My dad has the Aduro u-grip and likes it, but he says it has fallen off his dash a couple times. He doesn't use the 3M tape though, so I imagine that could stick it more permanently.
http://www.amazon.com/Aduro-Univers...GLF8/ref=sr_1_2?ie=UTF8&qid=1405607983&sr=8-2
I've also seen options that fit on your vent.
http://www.amazon.com/Kenu-Airframe...1B4W/ref=sr_1_1?ie=UTF8&qid=1405608084&sr=8-1
The vents in my car are fairly close together, so I'm a little concerned about that fitting.
I haven't really seen many of the traditional windshield mount options, but I never had much success with those sticking well anyway.
Any thoughts on the two I posted plus other possibilities?
Click to expand...
Click to collapse
Hello,
The one that your dad has is awful, it won't stick even with the 3M tape/disk. As for the second one, I used with a smaller phone and it worked fine, but I think it might be a tight fit for the N5, especially if you use a case.
I currently have these two:
http://www.amazon.com/iOttie-Windsh...ie=UTF8&qid=1405608590&sr=8-5&keywords=iottie
http://www.amazon.com/iOttie-Univer...ie=UTF8&qid=1405608655&sr=8-7&keywords=iottie
The first one is in my car, the other one in my wife's. I particularly like mine, as it is easier to get the phone in and out. Also, you won't need the 3M tape. iOttie uses an special type of suction cup that attaches to virtually anything. I will also like to mention that both mounts have fallen a couple of times, during the winter time, but I am talking about really cold temperatures. You can put them in the windshield as well as in the dashboard, but I don't like to put them in the windshield, because I mostly listen to music through my phone and it is kind of far away to use for me.
Regarding the vent mounts, I have used them in the past with other phones, and there is just one major benefit in my opinion. When you are using the navigation app, the phone tends to get really hot and if you are listening to music is even worse. With your phone in the vent, that won't be an issue, even during the winter. The only con I can think of is that some of those vent mounts won't have a strong hold in your phone, so if you hit a big bump in the road the phone might come out.
I hope this helps.

cgjjaf said:
Regarding the vent mounts, I have used them in the past with other phones, and there is just one major benefit in my opinion. When you are using the navigation app, the phone tends to get really hot and if you are listening to music is even worse. With your phone in the vent, that won't be an issue, even during the winter. The only con I can think of is that some of those vent mounts won't have a strong hold in your phone, so if you hit a big bump in the road the phone might come out.
I hope this helps.
Click to expand...
Click to collapse
Yeah, that's why I was looking at vent mounts. My old HTC Incredible would overheat if I didn't position my one vent in such a way as to blow cold air on it. Unfortunately in my new car the vents can't angle to blow cold air on where the phone would be in a window or dash mount.

I have a Kenu Airframe and am a huge fan. I've had it for a little over a year. Excellent product.

atoy74 said:
I have a Kenu Airframe and am a huge fan. I've had it for a little over a year. Excellent product.
Click to expand...
Click to collapse
+1 on the Kenu, but I used it with the Nexus5 Qi charger. See this thread:
http://forum.xda-developers.com/goo...es/kenu-airframe-n5-wireless-charger-t2573184
It's very convenient to have the N5 magnetically mounted. I tried without the magnetic charger, it's a bit hard to insert/remove the phone from the Kenu mount.

I use a vent clip one I picked up from Wally-World. It worked fine for the last three phones I've had. $15.

Suggestions for Car Mount?

Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).

I Umair I said:
Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).
Click to expand...
Click to collapse
http://www.amazon.com/Koomus-CD-Eco...Samsung/dp/B00JP0RTB4/ref=zg_bs_2407778011_19

I have the Koomus as well. It's major flaw is the part that pushes against the top of the CD slot may become loose as you remove the phone.
You can buy clones that attach to your vent or with VHB adhesive for as little as $4 from DX, aliexpress, etc.

http://www.brodit.com/productList.html?brand=OnePlus&model=One&pn=prod
you will need a car-specific hilder as well. its a little pricey but totally worth it (for me).
i have one of those for my Nexus 7 Tablet since some years, just works all fine
also used a specific holder for the Galaxy Nexus when I still owned the device.
cheers!

if you have a case, or if you are OK with removing your back cover and throwing a metal plate back there (this is what I did), this one works great!
http://www.amazon.com/gp/product/B00HUIL310?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
you just have to tape down the metal plate. I placed mine back there and about a day later I started losing signal...the plate had fallen towards the bottom of the phone and must have been blocking some antennas or something. moved it up, taped it in place, and its been solid and working great since. I use this every day to and from work and anywhere else I go without it ever budging. its so nice not having to clip the phone in.

Search Xiaopimei on Amazon ! Amazing and very cheap !

Xiaopimei is great, I agree

I've been using the Brodit/Proclip (same thing) for about a year now, great stuff. I can highly recommend it

I've ordered
http://www.banggood.com/REMAX-RM-03-Mobile-Navigator-Car-Outlet-Bracket-p-982977.html
I heard its great, and its pretty cheap, and universal size phone can hook to it.
Here is video description
https://youtu.be/qMYhr9YN9Ok?t=22s

Brodit for OnePlus One
Remember to buy a Proclip for your specific car to mount on

My experience, over the last 7 years. I swear to always buy Herbert Richter (HR) mounts. (ebay or online German/UK stores)
Extremely durable plastic (don't want your phone to fall). Universal, also use the same mount on my bicycle, in other cars. Mine has now been in use for 5 years now (have 2). I use the universal one and I use the vent holder in the car. Doesn't block the view and in summer gets cooled down because the airco blows cold air on it. Also doesn't damage the phone and really holds it well.
Also very good experience with their customer support.

Why doesn't this case exist?

I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.

I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk

Tonesav said:
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
I'm looking to buy still, just got my s8+ a couple weeks ago, with the unveiling of the note8 I almost took it back
as of right now for in the car I'm using https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ with cables
not sure I want to have to add in something to a case to make it compatible I'd rather the case be compatible to begin with, many magnetic chargers work just fine without add ins

https://docs.google.com/drawings/d/10wBkiHyNDZF969vzCDtKLQ8TI5XLnB5wJ3GOLJJhA-8/edit?usp=sharing
basically just imagine some time on the dremel to cut out everything covering up the back as much as possible except maybe leaving a bit near the edges
if I have the ring it'll be near the power button
and the kickstand will be probably above the camera or down by the fcc text, very small chance I do it vertical by the bixby button
pair it with a belt clip, and maybe something like a folio cover under the screws if I do feel like having cards
if I can do this with existing parts and a dremel why can't one of these case makers?

I'm trying to figure out how I would do a swivel like the ring but with something as long as a kickstand for more angle options, found one custom stent on a case that could work, not sure yet if that's how I want to do it?
figured it out, answer is no kickstand, there's 3 places I legit need a kickstand and I can just get stands and put them there
apparently there isn't much of a phone case modding scene I can find.... does everyone just live with the cases they buy? can't everything be improved with some ingenuity?

My new case, ticks most of the boxes
https://www.amazon.co.uk/XOOMZ-Detachable-Blocking-Magnetic-Leather-Brown/dp/B073QJ1N8P
biotoxin said:
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
Click to expand...
Click to collapse