Related
Hi, just wanted to give a quick impression of 2 windshield mounts I ordered.
http://www.amazon.com/Arkon-Univers..._1_3?s=wireless&ie=UTF8&qid=1305654075&sr=1-3
http://www.amazon.com/Arkon-IPM515-...Holder-Compatible/dp/B003Z4L68S/ref=pd_cp_e_2
Overall they both work OK. I much prefer the "Universal Mount" just because of how the Slim Grip opens/closes. The Universal is a squeeze style close with a button release. The Slim Grip you have to push the lower part down to open it, and the same to get your phone out. Kind of a pain.
Plus, even though the Slim Grip seems to be OK in Landscape...it still scares me not having a physical piece there to hold it up in case the spring force isnt enough.
I am using the Slim Grip as a vent mount (using the vent mount supplied with the Universal) and the Universal as a Windshield mount. So far the suction cup on the Universal seems very strong and I have not worried about it coming down.
One thing I noticed on the Universal that is a bit annoying, when the unit is fully opened and you are driving it rattles. This is remedied by simply closing it 1 or 2 clicks (which still allows you to put your phone into it without opening it back up).
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Ordered the Universal yesterday, should have it tomorrow. I'm curious to see how well it works with the extended battery, but I like the idea of mounting it to the vent. Can't wait to get it regardless though, since the other one I have will only work with the stock battery.. Grrr..
I had a mount similar to the universal mount here (different brand) that I grew to loathe quite a bit because it rattled with no device in it. I didn't put my phone in it every time I got in the car and this bothered me greatly. I'm glad I avoided that universal mount because I would not tolerate that at this point.
The second mount (that you have to push down on the lower part to insert device) is the one I use now. It doesn't bother me how it functions and it is quiet. It grips well enough that you shouldn't worry about it slipping, and the extended clips make it work great for this phone without needing a huge stretch on the cradle to insert the phone.
I got the universal mount yesterday. Love it so far. Haven't noticed any rattling, but I may not either unless I switch vehicles. Keeps the phone secure though, and it works nicely with the extended battery in place (no case yet).
I do kinda like the looks of that other one too. Maybe I might order it for the wife and try it out. Not sure how often she'd use something like that though...
frankspin said:
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Click to expand...
Click to collapse
Hi, I do not have much experience with this yet as this mount is in my wife's car.
The vent mount clips do seem a bit flimsy...especially since I am using it on the "slim" mount. With the universal I wouldnt worry too much because of the button release, squeeze in. You arent putting much if any pressure on the clips.
But with the slim mount...I have a feeling these could break on me down the road.
Those clips are definitely flimsy. Solved the problem though: rather than use the clips, I pulled that other piece off and cable tied it to my vent. Solid, and not moving.
Obviously, it does no good if you switch vehicles, but for that I will use windshield mount then.
Sent from my ADR6350 using XDA App
Just wanted to update on my "hack" for the vent mount. Been very solid so far. I have some concern over the longevity of the cable ties, but honestly, it's a very minor concern. Very little movement of the phone, great location being on the air vent (especially in the summertime, keeps it cool).
I can post pics if anyone wants to see, but I'm glad I went that route. Leaves the windshield mount available for when I'm in a company vehicle or my wifes car.
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
jesand83 said:
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
Click to expand...
Click to collapse
Not with a magnet. My gut is that a resistor or something is what's required. Check this thread:
http://androidforums.com/htc-droid-incredible-2/350066-there-anyway-trick-dinc2-into-car-mode.html
Hey guys,
So im still wondering which one is the best car mount for me...my car has limited spots where to put it but I got this as a gift so cant complain hehe
I made a review as I always do with my products
Hope this helps you choose the right one for you
http://youtu.be/x8XNr7A91j0
Does the mount scratch up the bezel of the phone?
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
vw671 said:
Does the mount scratch up the bezel of the phone?
Click to expand...
Click to collapse
No,
the way the phone goes in you dont have any hard contact with the bezzel and also its ruberized on the corners. The back part of hard plastic but there is no movement of the phone so scratches will be minimal..Be sure of course to check for hard particles before putting your phone
dn3g3l said:
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
Click to expand...
Click to collapse
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
rault18 said:
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
Click to expand...
Click to collapse
What are the better options out there for car mounts for this phone?
thanks
Did he say 49.99 or 14.99?
49.99 plus tax
Thanks for the review I went ahead and ordered one from Amazon $34 shipped.
dn3g3l said:
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
Click to expand...
Click to collapse
oh im sorry well to be honest pushing was not that hard..yes there is resistance but not necesarely hard just be sure you are moving the bottom away first so the charging port doesnt go on an angle..the click you hear is more of the plastic getting in place than the charger getting in. It was slightly harder than removing a regular car charger. Just be careful when pushing the tab back and try to do it straight . The removing process should be exactly the opposite of the inserting one
$50 for a mount is too much. Although I love the phone and Google Navigation a lot, but it does get quiet hot while on GPS and charging at the same time. I will stick with my Garmin GPS.
Nice!
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
CincoDeDrinko said:
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
Click to expand...
Click to collapse
glad I was able to help! there are better ones out there..I will be trying to review some as well ..just waiting to purchase some hehe
I just dont understand why did samsung used so much plastic in the wrong parts!
It serves me perfectly.
The OEM Car Mount serves me really well.
I modified it with a vent mount because I did not want to install it to the glass.
After I put it to the vent, it works really well. It stays firmly even if I operate while I am driving. I do not have any problem to put or take out the phone from the mount even thou my phone has Ghost Armour Black Carbon.
Of course I have to use a force a bit to the tap, but no trouble to me.
After I got the mount, I have not used Garmin 1450LMT at all, so finally I sold it. The Car mount is the most useful accessory that I've purchased for the phone. I paid around $33 for the OEM mount & $2.50 for the vent mount from Amazon.com.
PS. Please excuse the dust in the vent. I was surprised when I saw the pictures. I think I need to detail the car very soon.
very well done sir! I like your custom mount option! The product is rock solid..however in my case I just needed more flexibility
I'm really digging the OEM navigation mount. Works wonderfully if attached to the windshield. But completely useless as a dash mount, don't know why they even give you the dash "puck" as there is not way in hell you can adjust it as a dash mount (*at least in a 4Runner).
But the BEST thing is the line-out capability in car mode!!! IT'S AWESOME!!!
I tried most phone mounts for the car and did not like them. I don't like the window mount as it obstructs your vision and leaves circles inside the front windshield. It is also too far away to touch the screen/phone as you drive. I didn't like the vent mount because during the hot Summer days, you have one less AC vent blowing at you. I recently bought the CD player slot mount and I LOVE IT! It places your phone a lot lower than the vent mounts and it fits a wide variety of phones. It is also more discrete to motorists around you and its way closer/easier to touch the screen. You just place your phone on it and squeeze the sides until it locks. Then you can tilt it to landscape, tilt it back and forward, and tilt it towards the left or right. When you are done, you just press the top rear and it opens up. It will fit our phone and even the Galaxy Note. Oh yeah I had to buy this as my 4.5" screen Samsung T989 did not fit my old vent mount that fit my G2X. I bought mine from a vendor through Amazon. Check out the 4.5 star rating from 134 customers. Its $19.95 with Free shipping.
http://www.amazon.com/Mountek-MT500...W3D4/ref=sr_1_1?ie=UTF8&qid=1325492429&sr=8-1
Is there a mount that I can place down by where the gear is? I don't want windshield or dash because they obstruct my view. I don't want vent mount because I need my vents for air conditioning and it's still a bit high. I can't do CD mount like the guy above posted because my cd slot is behind my built-in GPS which flips out to put CDs in.
Can anybody recommend a good mount or would any dash mount work for that situation. I'm thinking maybe putting it in the cup holder or nearby.
Here's my custom effort:
I'm after a car holder for my HTC One whereby I don't have to take the phone out of the case as it's annoying and I'd like something quick and easy to use.
I've bought a few from Amazon for my HTC One X but they were rubbish, flimsy or just didn't stick to the windscreen.
So I'm after some personal experiences too, has anyone bought a car holder for their One that you don't have to take it out of the case to use and does it work well?
Somewhere I can buy it from in the UK
Something like this I bought for my HOX but it just didn't work very well. Might give it a go since it's only £2.
My friends in the UK use this: http://www.amazon.co.uk/Mountek-nGr...e=UTF8&qid=1372679295&sr=8-1&keywords=Mountek
I just ordered one this morning and am expecting to receive it in a week to ten days since I am in Egypt. My friends have had it for a long time now and they tell me that it's amazing and the quality is extremely durable to this day.
Some of them also use a combination of two items: this and this. The first one has a sticky pad which is very, very strong and just doesn't fade, they tell me it's as strong as the day they bought it and they use the second item sometimes, basically they attach it to the sticky pad and use it as an actual car mount.
The second suggestion isn't the most practical but it works well and is fairly cheap, however the Mountek one is just perfect; not only did I read good reviews about it and was it recommended by friends, but I also watched videos and I find it great.
http://www.youtube.com/watch?v=kG3A4uq1ItQ
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
gibbs1984 said:
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
Click to expand...
Click to collapse
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
wnp_79 said:
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
Click to expand...
Click to collapse
Thanks, I'll add it to the possible list and I'll do some more research before pay day.
Appreciate the feedback
wnp_79 said:
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Click to expand...
Click to collapse
Yes this one works wonderfully. I thought it a little to simple at first... But simple wins here. It'll even work with future phones. You can install and remove phone one handed and of course cases work. Only bad thing is no dedicated charging... But i got over that quick.
Kenu airframe. For me it's the best.
Sent from my HTC One using Tapatalk 4 Beta
I've been looking for the same thing. Thanks for the recommendations, I will report back once I pick one up!
Has anyone seen a car dock for the G4? Or know of a good one that they recommend?
I had a universal one from my old phone.... couple comments on those types. Look into one that clamps from the sides(so maybe ones for iphone?) The one I have is bottom and top and it barely fits thanks to the size of this phone. Also, I doubt there will be one where you can still use the back button(thank you knock to unlock!) Finally, this phone is bigger and thus heavier. The mount I have is one that plugs into the "cigarette lighter" which works for my car. However, I would imagine you might have problems with a suction cup mount especially if it is a cheaper one.
I always used to buy the factory car mounts, but I switch phones so often, that it was getting a bit pricey. When I bought my G3 I bought the iBolt MiniPro. Finally, a mount I can use phone to phone. Here's the link to it on Amazon.
http://www.amazon.com/iBOLT-IBUC-33418-miniPro-Connect-Kit/dp/B00IJZYRCK
Ok thanks I'll check it out.
I got this one from my local Target and I love it... http://www.scosche.com/mounts/magicmount-landing. The best thing is the little metal price that you need to stick on your phone works just as well slipped inside of the back cover making it a non-permanent solution.
I highly recommend the iOttie One Touch mounts. You just push the phone into the holder, and there's a button in the middle that releases the spring loaded side clamps that locks the phone in place. To pick the phone back up, you squeeze a couple of tabs on the side right where you'd grab the phone naturally. I've got the old style in my car, and the new one with the telescoping mount in my wife's. Both are great.
They also have the very sticky type of suction cup that you renew by just running water over it. Ours both stick to the consoles that even have some texture on the plastic.
I've got the smaller size mount that I've had since getting an S4, but hers in the bigger size. The G4 fits OK in either.
Places like Meritline have them on sale frequently. I paid about $12 for the first one, and $15 for the newer one.
I got this iBolt when I had my Note 3, works great with the G3 and G4.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC/ref=sr_1_1?ie=UTF8&qid=1434102989&sr=8-1&keywords=ibolt+car+dock
I have one of those magnetic vent mounts and it turns out that the piece of metal fits perfectly behind the plastic back cover. Those magnets are strong enough to work through cases, though I have not received a case for the g4 to test it out.
They are usually on sale on amazon for $6
Update so got a cheap case from amazon and the magnet didn't work behind the battery cover, will try the plate between phone and cover like I had before with my S4. Only problem is the case back is rounded.
More sturdy - Waze user
I was thinking about getting the Qi sticker for the LG G4, after they get more in the US, then picking up the TYLT VU car charger http://www.tylt.com/vu-car/, but that would put it to far away in my vehicle.
So get either the ProClip https://www.proclipusa.com/ or the Pro.Fit http://www.pro-fit-intl.com/shopvsm.htm custom mount for my vehicle and then use the RAM Mounts http://www.rammount.com/components to convert and link them together in a good position for Navigation and Waze use in Horizontal or Vertical position.
This would allow me to use the Qi Charging (not capable on my current phone as it is a few years old) with any new phone I purchase, as why I am in this section is that I am leaning towards the LG G4 for my next phone.
Speaking of proclipusa they make custom smartphone holders and since their G4 holder is not out yet, they have a page to sign up and get notified when it comes out.
http://www.proclipusa.com/targetsections/lg-g4-car-phone-mounts.aspx
I'd highly recommend the Spiderpodium and just bend it into shape. It's super versital and minimal, but works fantastically as a car dock for my G4 and other phones. You can mount it in an air vent or really any sort of receptical, I have a slot for CDs and it Does just fine in there.
http://www.amazon.com/gp/aw/d/B00U8...iderpodium&dpPl=1&dpID=413qHPi24pL&ref=plSrch
The official maker is Breffo, but that one is very inexpensive and looks just fine.
These are the two I have in my cars.
http://www.amazon.com/gp/product/B00P053YQ2?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
http://www.amazon.com/gp/product/B008IOQ3K6?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Both are strong enough to hold the LG G Flex in the Otter Box Defender Case. I threw the metal plate on top of the battery put the leather cover back on and no issues.
I've just ordered a Brodit universal cradle (I swear by Brodit cradles and custom wired charging cables). I have installed a couple of 5v 3A USB voltage regulators wired in to a MicroUSB cable which pokes out just underneath my Brodit cradle location. Should give me plenty of juice for charging with Nav running.
According to Brodit, the universal holder is suitable for phones between 62-77 mm wide with a thickness of 6-10 mm. The G4 is 76.1mm wide with a 6.3mm to 9.8mm curved depth. Hopefully will fit fine! Will find out tomorrow!
phillymade said:
I got this iBolt when I had my Note 3, works great with the G3 and G4.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC/ref=sr_1_1?ie=UTF8&qid=1434102989&sr=8-1&keywords=ibolt+car+dock
Click to expand...
Click to collapse
That is exactly the one I had for my HTC One M8, worked like a champ. Can't use it with my Verizon G4 because the charging port is backwards.
I'm opting for a wireless charging dock (since I got the wireless charging quick circle case)
RedBullet said:
That is exactly the one I had for my HTC One M8, worked like a champ. Can't use it with my Verizon G4 because the charging port is backwards.
I'm opting for a wireless charging dock (since I got the wireless charging quick circle case)
Click to expand...
Click to collapse
?? I use it with my G3 and now my G4. Charges just fine.
Sent from my VS986 using Tapatalk
Little tough to explain. But I think the HTC cable that came with the one I got for my M8 is just the reverse of what the G4 has.
RedBullet said:
Little tough to explain. But I think the HTC cable that came with the one I got for my M8 is just the reverse of what the G4 has.
Click to expand...
Click to collapse
Yep, the M8 has the mini-USB port flipped to what the G4 has. So car mounts made for the M8 won't work with the G4 unless you modify it.
Car mode??
Is there a car mode for this device? I don't think it shipped with any kind of car app or anything...
daedalus1066 said:
I threw the metal plate on top of the battery put the leather cover back on and no issues.
Click to expand...
Click to collapse
I wonder if this will interfere with the NFC at all? I don't use NFC really so it isn't a big deal, just curious. Is it possible to stick the plate on the cover vice the battery since we have the option of a spare battery? Then I wouldn't have to worry about which Battery was in my phone.
Everyone you need to check out RAM Mounts! -- https://www.rammount.com/products/xgrip
I have two RAM Mount X-Grips. One on my motorcycle and one in my truck. RAM Mounts are modular mounts that you buy in pieces (they do sell kits) to serve the purpose you need and where you want to mount it. Due to its design it will securely hold most phones (my G4 with the spigen case fits) without any issue. It is easy to throw the phone in the mount and you never have to tighten anything down.
Example of configurations:
Motorcycle = handlebar U-bolt base + short arm + Standard X-Grip Mount
Truck = Adhesive flexible base + standard arm + Standard X-Grip Mount
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Tonesav said:
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
I'm looking to buy still, just got my s8+ a couple weeks ago, with the unveiling of the note8 I almost took it back
as of right now for in the car I'm using https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ with cables
not sure I want to have to add in something to a case to make it compatible I'd rather the case be compatible to begin with, many magnetic chargers work just fine without add ins
https://docs.google.com/drawings/d/10wBkiHyNDZF969vzCDtKLQ8TI5XLnB5wJ3GOLJJhA-8/edit?usp=sharing
basically just imagine some time on the dremel to cut out everything covering up the back as much as possible except maybe leaving a bit near the edges
if I have the ring it'll be near the power button
and the kickstand will be probably above the camera or down by the fcc text, very small chance I do it vertical by the bixby button
pair it with a belt clip, and maybe something like a folio cover under the screws if I do feel like having cards
if I can do this with existing parts and a dremel why can't one of these case makers?
I'm trying to figure out how I would do a swivel like the ring but with something as long as a kickstand for more angle options, found one custom stent on a case that could work, not sure yet if that's how I want to do it?
figured it out, answer is no kickstand, there's 3 places I legit need a kickstand and I can just get stands and put them there
apparently there isn't much of a phone case modding scene I can find.... does everyone just live with the cases they buy? can't everything be improved with some ingenuity?
My new case, ticks most of the boxes
https://www.amazon.co.uk/XOOMZ-Detachable-Blocking-Magnetic-Leather-Brown/dp/B073QJ1N8P
biotoxin said:
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
Click to expand...
Click to collapse