Note that Custom flash counter will increase and you will lose warranty!
#I am not responsable for anything - lose of data, job, wife, hair etc.
The recovery is compatible with all versions of Galaxy Fame - s6810 / s6810P / s6810L / s6810E / s6812 and is the only one fully working!
CWM 6.0.5.1
Changelog:
-reverted to oldschool look
-changed resolution for a nice fit into screen
-home (middle) button still can be used as 'Select'
This recovery is @wulsic`s work - don`t forget to visit his threads and thank him for his hard work on this device(s)
//make backups to external storage always because wiping data may wipe /data/media (internal) too and you will lose your backup!
What is working:
-as before, everything, without Mass storage.
How to:
If you have stock recovery see this:
-download Odin 307
-download CWM 6.0.5.1 archive and extract somewhere near
-run Odin as administrator
-uncheck "Auto Reboot" and "F. Reset Time"
-connect device under Download mode
-under PDA tab select recovery.tar.md5 previously unziped
-click Start and wait RESET status.
-after flashing, reboot into recovery using 3button combo and see the magic!!
Click to expand...
Click to collapse
If already having a previous version of cwm installed, flash the zip as usual and reboot recovery.
If you have problems with reverting to stock recovery, push Aroma File Manager into sdcard, flash via odin cwm 6.0.5.1, reboot into recovery and flash AromaFM as normal zip.. After flashing, find and delete reboot-from-recovery.p, located into /system folder.
Downloads:
Flashable zip - CWM - 6.0.5.1
Odin package - CWM - 6.0.5.1
Odin v3.07
Aroma File Manager
#Please give credit if posting somewhere else, out of this thread!
Credits:
* @wulsic
*amarullz for great AromaFM
*koush
*Phil3759
*CyanogenMod Team
Old version:
CWM 6.0.4.6 - Final
Changelog:
-removed some unused lines
-removed of "No" when you need to confirm actions
-home (middle) button now it can be used as 'Select'
-abandoned support for Mount Mass Storage
-added black background
Downloads
Flashable zip - 6.0.4.6
Odin flashable package - 6.0.4.6
Odin v3.07
How to:
If you have stock recovery see this:
-download Odin 307
-download cwm 7z archive and extract somewhere near
-run Odin as administrator
-uncheck "Auto Reboot" and "F. Reset Time"
-connect device under Download mode
-under PDA tab select recovery.tar.md5 previously unziped
-click Start and wait RESET status.
-after flashing, reboot into recovery using 3button combo and see the magic!!
Click to expand...
Click to collapse
If already having a previous version of cwm installed, flash the zip as usual and reboot recovery.
--------------------------------------------------------------------------------------------------------------------------------------------------------
CWM 6.0.2.8 - Still work in progress
What`s working:
-backup/restore
-advanced restore
-install zip
-wipe data/cache/dalvik
-fix permissions
-format cache/system/data/preload/sdcard etc..
Bugs:
-sdcard and external_sd are both mounting external storage-fixed
-mount USB Mass Storage doesn`t work yet
How to:
-download Odin 307
-download cwm zip and extract somewhere near
-run Odin as administrator
-uncheck "Auto Reboot" and "F. Reset Time"
-connect device under Download mode
-under PDA tab select recovery.tar.md5 previously unziped
-click Start and wait RESET status.
-after flashing, reboot into recovery using 3button combo and see the magic!!
Downloads:
CWM-6028
Odin v3.07
For /efs backup/restore see this:
Backup
Before all make sure you have a full cwm backup. Enter in terminal emulator and type:
Code:
su
dd if=/dev/block/mmcblk0p3 of=/mnt/sdcard/efs.img bs=4096
With this command you made a backup of your efs partition (that contains imei and other essential stuff). Enter with a file explorer in internal sd and see if you find 'efs.img'. If yes, you backed up your efs. It should be around 10,5MB. Now connect the phone to pc and copy efs.img somewhere and guard it with the price of your life .
Restore:
Open terminal emulator and type:
Code:
su
dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
Click enter and reboot. If after reboot you don`t have imei or you may be in safe mod reboot again. Bootanimation may get stuck and the phone may reboot by itself. Don`t worry.. It installs your efs back.
I tested the method:
-made a backup
-deleted efs folder - returned no imei, no baseband, no wifi, no nothing and safe mode.. scared the crap out of me
-restored efs.img with the above commands and after first reboot all was back..
You can read more of it here.
#I`m not responsable for anything. Do it at your own risk. The method was tested by me, so it should work on your device too.
To bypass flashing stock recovery:
LondonMpee said:
If you have root from flashing CWM then you can delete (or move it out and keep as a trophy!) a file from /system folder called reboot-from-recovery.p before you try flashing CWM again.
This seems to be the thing that keeps restoring stock recovery over CWM, I checked again last night and it's still CWM 6.0.4.6 :good:
Click to expand...
Click to collapse
corsicanu said:
make backups to external storage always because wiping data may wipe /data/media (internal) too and you will lose your backup!
Click to expand...
Click to collapse
Tested yesterday couple of times. Full wipe does not delete the backup stored on the internal storage.
didije said:
Tested yesterday couple of times. Full wipe does not delete the backup stored on the internal storage.
Click to expand...
Click to collapse
i've seen that, but to be sure, if anything happends with the phone, the best is to have the backup saved in external.. never know..
@corsicanu
Whenever you will get free time....plss build a TOUCH CWM Recovery.......PLSSSSSSS
Cheers !!!!
I will but not that soon.. I have other priorities.. Meanwhile you can navigate with other set of keys
-Menu - down
-Home (middle) - up
Sent from my GT-I9100 using Tapatalk
The first time i boot to recovery, i got cwm
The later is stock recovery
I flash again, i got cwm, for the first time boot to recovery
And get stock at the later boot
The last time i try again, i wipe cache and dalvik cache before reboot, there is a warning, it said "rom will flash stock recovery, this can not be undone" --"
Sent from my GT-S6810 using xda app-developers app
adipabeta said:
The first time i boot to recovery, i got cwm
The later is stock recovery
I flash again, i got cwm, for the first time boot to recovery
And get stock at the later boot
The last time i try again, i wipe cache and dalvik cache before reboot, there is a warning, it said "rom will flash stock recovery, this can not be undone" --"
Sent from my GT-S6810 using xda app-developers app
Click to expand...
Click to collapse
Somewhere there is a warning that lets you prevent stock recovery reflashing.. Try with reboot recovery and see if it says something of it..
CWM 6.0.4.6 - Final
Changelog:
-removed some unused lines
-removed of "No" when you need to confirm actions
-home (middle) button now it can be used as 'Select'
-abandoned support for Mount Mass Storage
-added black background
//make backups to external storage always because wiping data may wipe /data/media (internal) too and you will lose your backup!
What is working:
-as before, everything, without Mass storage.
How to:
If you have stock recovery see this:
-download Odin 307
-download cwm 7z archive and extract somewhere near
-run Odin as administrator
-uncheck "Auto Reboot" and "F. Reset Time"
-connect device under Download mode
-under PDA tab select recovery.tar.md5 previously unziped
-click Start and wait RESET status.
-after flashing, reboot into recovery using 3button combo and see the magic!!
Click to expand...
Click to collapse
If already having a previous version of cwm installed, flash the zip as usual and reboot recovery.
Downloads:
Flashable zip - CWM - 6.0.4.6
Odin package - CWM - 6.0.4.6
Odin v3.07
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
corsicanu said:
CWM 6.0.4.6 - Final
Changelog:
-removed some unused lines
-removed of "No" when you need to confirm actions
-home (middle) button now it can be used as 'Select'
-abandoned support for Mount Mass Storage
-added black background
//make backups to external storage always because wiping data may wipe /data/media (internal) too and you will lose your backup!
What is working:
-as before, everything, without Mass storage.
How to:
If you have stock recovery see this:
If already having a previous version of cwm installed, flash the zip as usual and reboot recovery.
Downloads:
Flashable zip - CWM - 6.0.4.6
Odin package - CWM - 6.0.4.6
Odin v3.07
Screenshots
Click to expand...
Click to collapse
woooowwww.. it's cool buddy. :victory:
it's great work.
thank's for the final cwm. :good:
can you help me how to root the latest firmware of galaxy fame S6810.?
majid_young said:
woooowwww.. it's cool buddy. :victory:
it's great work.
thank's for the final cwm. :good:
can you help me how to root the latest firmware of galaxy fame S6810.?
Click to expand...
Click to collapse
How to root stock firmware - easy way:
-install cwm 6.0.4.6 with Odin 3.07
-enter recovery
-Advanced>Reboot Recovery
-you will be prompted that root access is missing > select yes to root
-after the reboot of recovery, flash the latest SuperSu update from Chainfire`s thread
-reboot and enjoy your rooted phone
-don`t forget to thank Chainfire for his awesome work
Downloads:
Latest SuperSu Update
Odin package - CWM - 6.0.4.6
Odin v3.07
#Note that Custom flash counter will increase and you will lose warranty!
#I am not responsable for anything - lose of data, job, wife, hair etc.
corsicanu said:
How to root stock firmware - easy way:
-install cwm 6.0.4.6 with Odin 3.07
-enter recovery
-Advanced>Reboot Recovery
-you will be prompted that root access is missing > select yes to root
-after the reboot of recovery, flash the latest SuperSu update from Chainfire`s thread
-reboot and enjoy your rooted phone
-don`t forget to thank Chainfire for his awesome work
Downloads:
Latest SuperSu Update
Odin package - CWM - 6.0.4.6
Odin v3.07
#Note that Custom flash counter will increase and you will lose warranty!
#I am not responsable for anything - lose of data, job, wife, hair etc.
Click to expand...
Click to collapse
thank very much buddy.. :fingers-crossed:
i will try it. :victory:
Hi,
Just flashed this on a GT-S6810P and it is working well.
Many thanks for making this available.
jemail
Other feedbacks? About cwm or root? I'm just curious how things work for you..
Sent from my GT-I9100 using Tapatalk
NIce :fingers-crossed:
Perfect :good:
corsicanu said:
Other feedbacks? About cwm or root? I'm just curious how things work for you..
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Rooting And CWM both are perfect.............
This Rooting method is also compatible with the previous CWM (tested by me)
There is one thing that is missing............ A Touch Recovery !!!!!!!!!
THanks @ Corsicanu
Vkas Raj said:
There is one thing that is missing............ A Touch Recovery !!!!!!!!!
THanks @ Corsicanu
Click to expand...
Click to collapse
How about TWRP touch recovery ???... sounds too crazy for a little phone.
wichoxp said:
How about TWRP touch recovery ???... sounds too crazy for a little phone.
Click to expand...
Click to collapse
Who will make TWRP touch recovery ?
Related
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Since many requests to port it to i317/M, here it is finally released
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
I would appreciate a screen shot from your device, mainly under GUI options or custom backup menu where you select partitions
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
i317 (t0lteatt)
i317M (t0ltecan)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Recovery (.zip) packages instructions
They come in the form of .zip files that can be flashed in cwm recovery
Download philz_touch_xxx.zip file
Put the previously downloaded philz_touch_xxx.zip file on your sd card
Boot into recovery (volume up+home+power)
Select "Install zip" and browser to your downloaded zip file.
Now select the philz_touch_xxx.zip fileyou copied in previous step
You will have PhilZ Touch Recovery flashed
Odin packages instructions
They come in the form of .tar.md5 file
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<< Root your phone and reset Yellow Triangle >>
Once in recovery, flash the attached Root_SuperSU.x.xx.Only-signed.zip file to root your phone
If you want root + busybox: flash Root_SuperSU.x.xx-Busybox.1.20.2-signed.zip file
to remove yellow triangle, use TriangleAway
Before asking for support:
Make sure your issue is recovery related
All external sdcard issues: first format in PC with primary partition, tons of people are formatting as logical and come cry
Reproduce your issue and while in recovery:
Go to Advanced / Report Error
Copy the /sdcard/clockworkmod/recovery.log and attach it here
Give detailed info about your issues
Without these, there is little chance I can help you, so, do not get mad if I do not answer
Click to expand...
Click to collapse
Request a build for a new device:
Go to sammobile.com
Search for your phone
Download the +1Gb last firmware file (ideally unbranded and in any case a European version)
Unzip downloaded file
Rename the tar.md5 file into .tar
Extract from the tar file the boot.img and recovery.img files
Post them here with exact file name of the file you downloaded from sammobile (exp: N7100XXDLL7_N7100OXADLL4_XEF.zip)
Post a link to your phone specifications, ideally, a comparison between your phone and the n7100
If they do not share same hardware, ensure there is a cm10.x source for your phone (Optional if you do not know how to check it)
You got a 100% chance for an answer and 90% chance that I release it
Click to expand...
Click to collapse
Since i317 has its own forum, I am splitting its recoveries from my previous n7100/n7105 thread
Please also take a look and read some of the last pages here, as most of your questions would be answered
http://forum.xda-developers.com/showthread.php?t=2028103
Keep thread clean for only things related to this specific recovery
Do not clutter with general support questions, kernel/ROM general issues...
interesting might try this out tonight once i get home.
Re: [21.02.2013][PhilZ Touch][i317/M]4.63 Touch Enhanced CWM 6.0.2.8-exFAT-ext4-Root
Installed and works great. I really like the layout style. Just made a back up to ext sd and like how fast it was. Advance options are nice also. Thanks!
Sent from my SGH-I317 using xda premium
I would like to get some clafificaiton about what Support for TWRP means - does this mean if I flash the Touch Enhanced Recovery - I can restore nandroids that I made on TWRP?
SOrry if that is a NOOB question - but I just wanted to be sure - to avoid doing something stupid -
Re: [21.02.2013][PhilZ Touch][i317/M]4.63 Touch Enhanced CWM 6.0.2.8-exFAT-ext4-Root
mocsab said:
I would like to get some clafificaiton about what Support for TWRP means - does this mean if I flash the Touch Enhanced Recovery - I can restore nandroids that I made on TWRP?
SOrry if that is a NOOB question - but I just wanted to be sure - to avoid doing something stupid -
Click to expand...
Click to collapse
Actually it is a fair game, you can:
- backup in TWRP format to migrate from cwm to TWRP
- Restore from TWRP backups to migrate to cwm
Backup in TWRP format is always done in the multi volume format. Restore supports both. At the end, migration should be smooth.
If you find bugs, always post a log before requesting support please
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Actually it is a fair game, you can:
- backup in TWRP format to migrate from cwm to TWRP
- Restore from TWRP backups to migrate to cwm
Backup in TWRP format is always done in the multi volume format. Restore supports both. At the end, migration should be smooth.
If you find bugs, always post a log before requesting support please
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
This is simply awesome - I look forward to using this and can see there are a lot of advantages this offers -but I want to do a lot of reading first so I am sure I understand how to use it - really cool stuff...thanks!
mocsab said:
This is simply awesome - I look forward to using this and can see there are a lot of advantages this offers -but I want to do a lot of reading first so I am sure I understand how to use it - really cool stuff...thanks!
Click to expand...
Click to collapse
Restore of TWRP backups was tested by i9300 users and reported fine too. I personally tested for i9100 too
Only part I am still unsure and need feedback is android-secure restore...
Small update
New in PhilZ Touch v4.64
fix: when disabled, virtual keys would still show for a fraction of a second on start
Click to expand...
Click to collapse
v4.64
i317/i317M
cwm: http://www.mediafire.com/file/348v6u3hcx5n793/philz_touch_4.64-i317M.zip
odin: http://www.mediafire.com/file/ckx6cvjjtcz09jn/philz_touch_4.64-i317M.tar.md5
Click to expand...
Click to collapse
Awesome recovery. I find it to be on par with TWRP except for the backups. TWRP has a better setup for backups letting you compress and select what partitions you want to back up, including EFS. This recovery seems to have flawless USB storage mounting though, which TWRP doesn't have. That saved my ass tonight.
Re: [23.02.2013][PhilZ Touch][i317/M]4.64 Touch Enhanced CWM 6.0.2.8-exFAT-ext4-Root
DeMiNe0 said:
Awesome recovery. I find it to be on par with TWRP except for the backups. TWRP has a better setup for backups letting you compress and select what partitions you want to back up, including EFS. This recovery seems to have flawless USB storage mounting though, which TWRP doesn't have. That saved my ass tonight.
Click to expand...
Click to collapse
You can have all the custom settings and selective backup and restore under the Custom Backup and Restore menu
And it supports TWRP backup and restore too...
Sent from my GT-I9100 using Tapatalk 2
That's insane. This recovery just became my daily driver.
DeMiNe0 said:
That's insane. This recovery just became my daily driver.
Click to expand...
Click to collapse
Thanks
Next updates will even make it nicer
Just installed on my Note2 and wow. This thing is so quick and smooth. Hats off to the devs. :good:
I've been running with this recovery now for a few days and all I can say is WOW! This is an amazing recovery; hands down the best i've used for android period. Phil took the best parts of CWM and TWRP and mashed them together in a sexy recovery image.
http://forum.xda-developers.com/donatetome.php?u=4666971
Click that donate button; you know you want to!
New in PhilZ Touch v4.87
v4.63 ---> 4.64
fix: when disabled, virtual keys would still show for a fraction of a second on start
v4.64 ---> 4.87
Backup and Restore:
menu Custom Backup and Restore can now be accessed in main Backup and Restore menu
support restore backups from /sdcard/0 (Android 4.2) in custom jobs and TWRP mode
add support to sd-ext ext4 partition on external storage
menu to delete custom and TWRP backup images
auto-reboot option for custom backup and restore jobs
set .android_secure path in custom jobs
smart auto detect android_secure for stock CWM backup and restore operations
fix preload was selectable in TWRP jobs (even if would not actually be processed)
progress bar is no more overwritten by text
time and battery stats are shown and refreshed during nandroid operations
on successful or cancelled nandroid jobs, user background icon is restored
on cancelled nandroid jobs, progress bar is correctly reset and user background icon is restored
User configurable gesture actions
gestures: double tap, long press/move, long press/lift, slide left, slide right
always vibrate on long press/move action validation
actions: show log, change brightness, blank screen, capture screen shot, launch Aroma File Manager
GUI
default black theme without background icon
toggle clock and battery on top
header title will be auto-shortened to not overwrite battery and clock on lower res devices
battery and clock will truly refresh indications every 15 sec
user configurable dim screen timer
user configurable turn-off screen timer
manually adjust brightness (stock kernel doesn't support lower than 65, but recovery binary will accept 25 on custom kernels)
when double tap mode is selected, you now really need to double tap the same menu to validate it
menu Set Time Zone moved to GUI settings
fix Moscow UTC time
Misc
add support to sd-ext ext4 partition on external storage
Move Clean before instal new ROM menu to Wipe Data/Factory Reset menu
fix /system was left again mounted after start up and showing log
Click to expand...
Click to collapse
I need some testers please for some of the features introduced:
- android_secure correct support
- sd-ext support
- any of the above listed new features you'd like to report about
I am pausing a bit on this one, to get users feedbacks and maybe support some new devices
After that, I am doing multi-boot and full GUI scroll revision
Download links
v4.87
i317/i317M
cwm: http://www.mediafire.com/file/eao2fga7ta3sd3d/philz_touch_4.87-i317M.zip
odin: http://www.mediafire.com/file/cdqmd5owgr0hhd7/philz_touch_4.87-i317M.tar.md5
Click to expand...
Click to collapse
When I try to make a custom backup no matter what partitions I choose, I get an "Error while backing up *PARTITION NAME HERE* image!" error. Does this for the TWRP backup option as well.
Re: [03.03.2013][PhilZ Touch][i317/M]4.87 Touch Enhanced CWM 6.0.2.8-exFAT-ext4-Root
Can someone punt new to a help section or user manual so i can read how to convert from twrp to cwm and vice versa. Thanks
Sent from my GT-N7105 using Tapatalk 2
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
MORE CUSTOM ROMS
for 2.3.5
http://forum.xda-developers.com/showthread.php?p=48511583#post48511583
for 2.3.6
http://forum.xda-developers.com/showthread.php?p=49016464#post49016464
thanks to the developer en porter..
SHINJAREY
MARK RANUDA
BANJO
MANUEL CABALLERO
BAZTE
SERGEY
BHAVIK
DONT FORGET press THANKS METER ^_^..
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Bassem.Outlandish said:
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Click to expand...
Click to collapse
i think u used the wrong scatter.. if you are 2.3.6,, u also used 2.3.6 scatter
about the tweaks
zatanika said:
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
thanks again to SERGEY( who ported the rom to 2.3.5)
and SHINJAREY for the ROM
DONT FORGET press THANKS METER ^_^..
Click to expand...
Click to collapse
how about the tweaks?
---------- Post added at 12:53 PM ---------- Previous post was at 12:48 PM ----------
how can i flash the tweaks in bravia_xperia? is there's a tutorial?
[/COLOR]how can i flash the tweaks in bravia_xperia? is there's a tutorial?[/QUOTE]
what tweaks u were reffering sir?
Does this Roms work for both 918D and 918N?
harrycaine said:
Does this Roms work for both 918D and 918N?
Click to expand...
Click to collapse
sir it says 2.3.5 and 2.3.6.. so it means yes..
Thanks you
wos82c said:
Thanks you
Click to expand...
Click to collapse
welcome... ^_^
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
zatanika said:
sir it says 2.3.5 and 2.3.6.. so it means yes..
Click to expand...
Click to collapse
918D & 918N have more differences than the android version, i.e. base band
Zip verification failed
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Android
Android
efhra052187 said:
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
Click to expand...
Click to collapse
go to this thread sir before flashing rom
http://forum.xda-developers.com/showthread.php?t=2433162
ambroochizafer said:
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
Click to expand...
Click to collapse
dowload again sir mark cwm i updated it,, reflashed it again.. ^_^
jheb0y said:
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Click to expand...
Click to collapse
sir are you sure the rom you used is same as your device version? ( 2.3.6 custom roms for 2.3.6 device)
is your cwm recovery version is 5.0.2.8
make sure that you meet the requirements above then try to reflash again the rom.. ^_^
Custom Roms for 2.3.5 ONLY
FOR 2.3.5 ONLY
REQUIREMENTS:
your device should have
--> UPDATED cwm recovery installed / ver 5.0.2.8 (mark ranudas recovery or sergey recovery )
--> rooted device
failed to accomplished requirements above might bricked your device
MARK RANUDA
* ICS 2.3.5v1
http://www.mediafire.com/download/kst140gyoglh2nn/ICS2.3.5v1.zip
requirements:
1.Rooted
2.Custom Recovery Installed
3.SD card Partitioned ( Fat32 & Ext2 )
how to:
1.Copy ICS2.3.5v1.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Then Flash it.
5.wait fo the installation complete ..REBOOT.. done
Flashable Background
--}BG1 -- http://www.mediafire.com/download/g23tke21zerjvqp/BG1.zip
--}BG2 -- http://www.mediafire.com/download/mr8o9dl5mxzd9gf/BG2.zip
--}BG3 -- http://www.mediafire.com/download/ih2lnfgmhbegbh8/BG3.zip
how to:
go to cwm recovery
install zip from sdcard
choose the bg you wanted
flash it
wait till complete...done
FC Issue
MTK CPU control license verification removal
-use lucky patcher
-run it then click CPU control
-Open menu of patches
-Remove license verification
-Auto modesnext
put checks on Auto mode andt other patches(Extreme mode)
Click Aplly..done
* ICS 2.3.5v2
http://www.symbianize.com/showthread.php?t=889483
how to:
1.after downloading place the Copy of ICS2.3.5v2.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Flash it..
5.wait fo the installation complete ..REBOOT.. done
LINK TO ENABLE INT2EXT:
http://www.mediafire.com/download/0608ou5xb6unexy/Enable-INT2EXT+.zip
* JD_V3_odex_rom
http://www.mediafire.com/download/ctot5bnh8nayjta/Jellydroid_V3_odex_rom_by_mark-2.3.5.zip
how to:
1. Download & Place Jellydroid_v3_odex_by_mark.zip rom in your SD Card
2. TURN OFF ur DEVICE & Go to Recovery Mode.
3.Install Zip From SD > choose "Jellydroid_v3_odex_by_mark.zip" & Yes.
4. Wait for the installation process finished...DONE
SHINJAREY
* BRAVIA_EXPERIA V4
http://www.mediafire.com/download/rmvdka0vmbvuamr/Bravia_Xperia..v4-2.3.5-signed.zip
how to:
1.DownLoad bravia xperia v4 en put it on your SDcard
2.TURN OF YOUR DEVICE GO TO CWM RECOVERY (press together vol up+power)
3.WIPE DATA FACTORY RESET
4.WIPE ALL CACHE PARTITION
5.GO TO ADVANCE & WIPE DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE BRAVIA_XPERIA BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete.. REBOOT...done
* GINGERBEAN V2
http://www.mediafire.com/download/6djqobsxphlwbf1/GingerbeanV2+by-jarey-2.3.5-signed.zip
how to:
1.DL gingerbean
2.PUT IT IN YOUR ROOT OF SD CARD...
3.GO TO CWM RECOVERY
4.WIPE DATA FACTORY RESET..
5.WIPE ALL CACHE PARTITION AND DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE GINGERBEAN BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete....11.REBOOT....done
*ZHYDROIDv1
http://www.symbianize.com/showthread.php?t=854024
how to:
1.Alcatel OT 918M/N/D 2.3.5
2.Must be Rooted
3.Custom Recovery installed
4.Download the zip put it on your sd card
5.Already have an SD ext or Double Partition Fat32/Ext2
6.Do a full wipe,dalvic cache,data,sd ext
7.Then flash it..^^
8.after installation complete.. REBOOT
ported roms by SIR BAZTE
https://www.facebook.com/groups/237333346380882/permalink/466966280084253
or
*Lenovo Fujian
http://www.mediafire.com/download.php?m3phbyo7317bock
note: to change chinese language to default english here how..
Before you flash the zip file edit the build prop inside Look for the line(see below)
ro.product.locale.language=zh
change "zh" to "en"
save and apply the changes
put it back inside the zip file
flash it
*Lenovo P70
http://www.mediafire.com/?ljphuxa2n5hbuzx
*Micromax A75
http://www.mediafire.com/download.php?12dwlyh4o2irci5 HOW TO:
how to flash lenovo fujijan / lenovo p7o / micromax a75
*Wipe data/factory reset
*Wipe dalvik cache
*Install zip from sd
*Choose zip
*Locate the zip file ,flash it
*wait till installation complete...Reboot
BANJO
YONIP CYANOGEN MOD
https://www.facebook.com/notes/alca...alcatel-918n-235-by-banjo0917/475287262585488
YONIP ROM
https://www.facebook.com/groups/237333346380882/permalink/468154073298807
HOW TO INSTALL:
1. Install YONIP Alcatel 918N CM-ROM via recovery;
2. Reboot to System and let system initialized;
3. Reboot to Recovery;
4. Install Market Download FIX;
5. Reboot...ENJOY
SERGEY MELNIKOV
*2.3.6 over 2.3.5
http://yadi.sk/d/p2vnN_4X10x21
*2.3.6 over 2.3.5 tiny
http://yadi.sk/d/cB5bW0wl12BKR
how to:
put it on ur sdcard
then flash it
wait till intallationcomplete...
REBOOT
ANDREAD 3.2 (2.3.5)
https://www.facebook.com/notes/alcatel-ot-918n-users/andread-32-for-alcatel-918n-235/396630220451193
or
http://www.4shared.com/zip/8hLXUjQb/Andread_32_i2e.html
howto install:
1) microsd must be partition before installation (first partition primary FAT32, second partition primary EXT2)
2) I suggest to do a cleaning install. after installation of this rom you must install all into your device.
DO NOT USE BACKUP
3) wait until phone is on than reboot again phone
LEWA 2.3.5
http://turbobit.net/1wtsokyk0tuq.html
how to:
1. Download ROM & extract it using WinRar in PC.
2. copy that folder to your Memory Crad in below Location.
Memory Card > clockworkmod > backup > ***Copy Here***
3. Reboot your Phone in Clockworkmod Recovery.
4. Wipe Data... Wipe Cache ... Wipe Dalvik Cache.
5. Go to Backup & Restore > Restore.
6. Select "LeWa_ROM_2.3.6_Bhavik_Barai" & Restore It.
7. Reboot your Device & Enjoy
>>> md5 MISMATCH????????????
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
erase it content then save it..
go to cwm recovery then restore it..
reboot
or
.......If the above steps failed, do the procedure below
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
deleted the file and create a new file with the same name
save it then restore tru cwm recovery
reboot
credits to all DEVELOPER and PORTER
Alcatel 4030X
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Dominik940 said:
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Click to expand...
Click to collapse
no sir .. for alcatel 918 only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.4.4
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.3.3
Second Method Is Via ODIN.
First Download ODIN
Now Download the N8000/N8013-CWM-6.0.4.4.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select N8000/N8013-CWM-6.0.4.4.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix @invisiblek {These Guys Are The Best And I Thank Them for helping me every step in the way and not thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads And Q&A
Downloads :
1.IMAGES
N8000-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
N8013-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.TAR FILES
N8000-CWM-6.0.4.4.tar Build #1 {For Odin}
N8013-CWM-6.0.4.4.tar Build #1 {For Odin}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For Later Use
it can't mount the external sd
iRoNX said:
it can't mount the external sd
Click to expand...
Click to collapse
seriously i did not notice such error, i will see what i can do tomrrow Thanks
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Shmong said:
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Click to expand...
Click to collapse
Well thats odd :/ are you sure you have n8000 build not n8013 as i am recovery fine
Yes, i'm pretty sure. I've tried to do this few times via both terminal and odin. Now will try one more time...
UPD: I've repacked the img file with the tar archiver+ put md5 checksum (tar.md5) and flashed it with odin successfully.
And like iRoNX said it can't mount extSD: "error mounting /storage/sdcard1"
UPD2: The recovery from similar thread have another issue: cannot format "/data" and cannot explore internal flash )))
Shmong said:
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Click to expand...
Click to collapse
+1.
The Odin tar file is not OK. Although I did not get a bootloop, the indicator on phone in download mode goes to the end and then stays there at "NAND write". I has to disconnect the phone and reboot manually, and my old version of CWM was still there (phew!). The .img files and dd worked fine.
Thanks anyways for this update !!!! It worked to get me on JB 4.4 !
Update: When phone is powered off and charger connected, upon starting there is a garbled green image that comes on for several seconds - most likely the battery charging icon - and then the phone will start up. It was not there before flashing 6.0.4.4. Anyways my phone does start up........
Tar file not working.. gets stuck at "Nandwrite"
Thanks for the recovery, I made it into CWM zip files so you can flash in CWM or TWRP here:
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8000-CWM-Recovery-v6.0.4.4.zip
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8013-CWM-Recovery-v6.0.4.4.zip
zedomax said:
Thanks for the recovery, I made it into CWM zip files so you can flash in CWM or TWRP here:
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8000-CWM-Recovery-v6.0.4.4.zip
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8013-CWM-Recovery-v6.0.4.4.zip
Click to expand...
Click to collapse
Way to go, champion !!
Flashed but the external SD card doesn't work
Sent from my GT_N8000
ODIN Image file attached.
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
SD cards problem
Hello again,
Within this version of CWM, the SD card problem seems to be only for the 64g cards as tested on my N8013. However, after you flash the Rom you'll using, there is no problem with 64g cards outside of CWM recovery mode.
Smaller sized cards 32g and less will mount fine while you are in CWM recovery mode.
Cheers,
L
lobo25 said:
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
Click to expand...
Click to collapse
Not working for me... says img. file is invalid. then ends.
Love it. Thanks.
lobo25 said:
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
Click to expand...
Click to collapse
Anyone confirm this as working?
Edit: Not working. Odin says invalid.
missing file
I seem to have lost my \efs folder, and in searching for a solution one of the steps I'm told to take is to flash "N8000-CWM-6.0.4.4.tar". However, it doesn't seem to exist anywhere (now that goo is gone), other than in this thread and the version here seems to be broken. Does anyone have the N8000 version of the .tar file?
Boot-loop, can't wipe device.
Hey everyone. I'm not exactly sure what happened, but it seems that my GT-N8000 is on the fritz again. The device was screen-off this morning (I left home) and when I came home it was in a reboot loop.
I jumped into recovery (CWM v6.0.4.4) to try to wipe both cache and dalvik (both successful) and rebooted. Same bootloop.
So then I decided to wipe the storage and reinstall the ROM (Gnabo v8 is what I had been running). When I attempt to "wipe data/factory reset", it says "formatting data . . ." and then reboots into the bootloop again.
Then I thought that maybe it was wiped, so I attempted to flash Gnabo. It installs successfully (Installing update, blue bar goes across, "Enjoy!" and "Install from sdcard complete."), however, when the installation starts, I get the first box and then it sits for almost 2 minutes before the blue bar appears, fills in just a few quick seconds, and then displays the completed message. It seems to me that the installation and the blue bar should be taking longer, but what do I know. Anyway, I rebooted (No, don't fix ROM flasing stock recovery on reboot), then back into the bootloop. So I'm still losing.
I don't know if it's related, but some months ago I had something similar happen in that the device was in a bootloop and it turned out that it had somehow lost the /efs folder. I had restored that (thanks XDA forums!) and it had been working fine since about June 2015.
I'm starting to think that my memory has gone bad, and that I basically have a 10.1 inch paperweight. Suggestions? Thanks for any help you can provide.
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse
Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse
Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse
Reserved
Reserved
Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me
Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks
English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards
at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while
Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks
CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard
Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download
Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!
Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account
LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?
Main thread + Features + Dev support
http://forum.xda-developers.com/showthread.php?t=2201860
CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.27.9
for Galaxy 551 / GT-I5510 / callisto
PhilZ Recovery is a CWM Advanced Edition that adds all the features you could ever miss in CWM.
It is a well proven recovery for many phones.
Please give your feedback, what works, and any bug you could encounter.
Read the features at the Main thread, and check if you are missing something.
To take a screen shot, just slide left!
And don't forget to read about powerful aroma file manager integration and double-tap shortcut (in FAQs).
How to install recovery?
From download link below, you'll get a 'recovery.img' file. Put that recovery.img at root directory of your sdcard. (means not in any folder)
Now, go to terminal emulator.
Give command:
Code:
su
You'll be asked to grant superuser permissions, grant it.
Now, give the following command:
Code:
flash_image recoveryonly /sdcard/recovery.img
Wait until it executes the command (4-5 seconds), it is installing the recovery.
Now, normally reboot to recovery and enjoy new recovery!
Download links
Latest version can be found here:
recovery.img (v6.27.9)
https://docs.google.com/file/d/0B5c3gpyMBJusbWk2U1k3OWxRMEk/edit
aromafm_callisto.zip (v1.91)
https://docs.google.com/file/d/0B5c3gpyMBJuscnQyN28xZWNKeEE/edit
Click to expand...
Click to collapse
Special thanks to:
@Phil3759 : For this awesome open source recovery.
@chraso: For hosting and compatible flags.
AndroidARMv6 Team: For keeping this device alive.
Cyanogenmod Team: For making all these possible.
:FAQs:
Q: Wanna know about Aroma File manager?
Visit the aroma file manager main thread for more info---> Aroma file manager main thread
Aroma file manager is a touch file manager which can be used while in recovery. It has options for copy, paste, delete, change permissions and many others. Also, it has a Terminal inside. So, if you forgot to give correct permissions to any file you can do that directly from recovery. This file manager has got many themes, font, icons, etc. options and it's UI is fully customizable.
Q: How to start this File manager in Recovery?
Rename the downloaded file to 'aromafm.zip'.
Create a folder 'aromafm' inside 'Clockworkmod' folder on your sdcard.
Now, move that 'aromafm.zip' file to the 'aromafm' folder.
We're ready now, when you want to use it in recovery just double tap anywhere OR go to "philz Settings" and select "Aroma File Manager" and it will start up.
If you also want to browse /data, /system and /sd-ext then mount them in the "mounts & storage" option in recovery.
Q: Problems with Aroma file manager startup?
After doble-tapping OR selecting 'Aroma file Manager' option under 'philz settings' if recovery gives error: 'aromafm.zip not found at /clockworkmod/aromafm' then, wait for 4-5 seconds and again select 'Aroma file Manager', because it maybe busy mounting sdcard.
If still doesn't work, you've made mistakes in steps mentioned in first post, please do again carefully.
Q: Does your phone every time reboots to recovery?
This happens very rare when you flash the recovery using any bad app or via any wrong (not proper) method. What you can do is:
-If you've made a backup of your current ROM then just restore only it's "boot" and then select 'reboot to system'.
OR
-You don't have a backup? Then just flash the ROM which you are using currently again and wipe 'dalvik-cache'. Then reboot to system. Booting process will take time.
SCREENSHOTS:
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original
cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Thank it is nice recovery working like charm.
@Bhargav97 at the time of updating OTA , recovery didn't boot in system always boot back in recovery. I didn't face such problem before with your recovery.
UPDATE:
Changelog:
-PhilZ sources updated to 6.23.8 (26.03.2014)
-CM-ota compatibility fixes.
Please give feedback especially on cm-ota.
Download link updated in first post.
No luck booting back in recovery not booting in system.
Ansh2000 said:
No luck booting back in recovery not booting in system.
Click to expand...
Click to collapse
Will see to it. It's working for all devices. What's wrong? I'll try to figure it out.
@Bhargav97 any fix, recovery booting normally in system only problem occur when flash ota patch automatically.
@Bhargav97 you would like to compile TWRP for callisto.
Thanks in advance.
Ansh2000 said:
@Bhargav97 you would like to compile TWRP for callisto.
Thanks in advance.
Click to expand...
Click to collapse
I would have done it until now but you wasted my enough time in PMs. You asked the same question in 3-4 PMs. And now, here. I already started work on TWRP for armv6 devices. I first did it for Galaxy Mini. Now, I'm making it stable. Once, it gets stable, I'll make it for other devices and the last would be your device. Because, I don't see many people using this Galaxy 551 and moreover you wasted my time in PMs, so...keep waiting
MAJOR UPDATE:
PhilZ Recovery updated to 6.27.9.
PhilZ Recovery FULL VERSION now enabled (Touch, GUI options and everything!).
CWM updated to 6.0.4.8.
Ready for official support!
I seriously want feedback on this version. If it is working, we can now get our phone in "officially supported devices" list.
Download link:
https://drive.google.com/file/d/0B5c3gpyMBJusUnZnUEc1MW9iQlk/edit?usp=sharing
Thanks for your hard work. Recovery is not booting in system always booting back in recovery except that every thing working like full philz recovery.
Ansh2000 said:
Thanks for your hard work. Recovery is not booting in system always booting back in recovery except that every thing working like full philz recovery.
Click to expand...
Click to collapse
Bhargav97 have done fixing and told me to compile.
Here is the fixed version:
https://docs.google.com/file/d/0B5c3gpyMBJusbWk2U1k3OWxRMEk/edit
And the Aroma File Manager:
https://docs.google.com/file/d/0B5c3gpyMBJuscnQyN28xZWNKeEE/edit
@Bhargav97
@chraso
Thanks, every thing is fine now booting normally on system.
Any update is coming ?
I'm posting this new version updated 16-04-2014
PhilZ-Touch v6.41.6:
https://docs.google.com/file/d/0B5c3gpyMBJusZjBnLU5ER0RvMWc
Need feedback for specially the Hardware & Virtual on-screen keys.
@chraso all hardware and virtual on screen keys working correctly and now virtual keys got transparent but philz touch background doesn't work.
Any news? As the latest Callisto ROMs require a changed recovery (b/c of partition layout), these PhilZ recoveries won't work anymore, right?
steve8x8 said:
Any news? As the latest Callisto ROMs require a changed recovery (b/c of partition layout), these PhilZ recoveries won't work anymore, right?
Click to expand...
Click to collapse
I don't have a PC nowadays so I don't think there will be any updates (atleast for the time being). You can use CWM for flashing CM11 builds and PhilZ Recovery for older ROMs. Should be alright (?)
I think unpack-repack of kernel and fstab (replacing from latest CWM) might work but I'll need somebody's help that can unpack-repack in their PC.
I'm getting:
# flash_image recoveryonly /sdcard/recovery.img * - permission denied
if I su, then run the command I get:
flash_image recoveryonly /sdcard/recovery.img
Any Solutions?