Related
Warning: This will update your bootloader, so proceed at your own risk!
Flashing the update will wipe all data, as in factory reset wipe, as in everything is gone. Poof!
You must update to 4.1.2 before updating to 4.3.
You can not downgrade to 4.1.2 after installing the 4.3 update. Any attempts to do so will brick your device.
Go Here For Rooting Instructions
Instructions
1) Backup your files to your PC.
2) Odin back to stock 4.1.1 (DLK3).
3) Download update zips for BOTH 4.1.2 and 4.3, and check MD5 for both.
4) Create two folders on your external sd card named 412 and 43, and put the 4.1.2 and 4.3 updatexxx.zip in the respective folders.
5) Plug phone in to AC charger (4.3 update takes a while).
6) Reboot recovery, install the 4.1.2 update from sd card, flash (update installs and phone reboots).
7) Reboot recovery, install the 4.3 update from sd card, flash (update installs and phone reboots).
8) Enjoy 4.3!
Edit:
The 4.1.2 OTA can apparently be flashed with Mobile Odin.
Download: 4.1.2
update412.zip
Download: 4.3
update43.zip
Download: Stock firmware
4.1.1 (DLK3)
*****
Hopefully some kind Dev will turn it into a recovery flashable zip..... :thumbup::thumbup:
danvee said:
Hopefully some kind Dev will turn it into a recovery flashable zip..... :thumbup::thumbup:
Click to expand...
Click to collapse
I just updated the OP with install instructions and a screen shot.
Proceed at your own risk!!!
upndwn4par said:
I just updated the OP with install instructions and a screen shot.
Proceed at your own risk!!!
Click to expand...
Click to collapse
does it work on unrooted stock 4.1.1?
That should be fine with stock recovery.
Should mention that this replaces the boot loader so be careful.
Sent from my SAMSUNG-SGH-I747
loserskater said:
Should mention that this replaces the boot loader so be careful.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Will do. Forgot with all the 4.1.2 excitement!
upndwn4par said:
Will do. Forgot with all the 4.1.2 excitement!
Click to expand...
Click to collapse
It looks like root and custom recovery are still accessible which is a good sign.
Sent from my SAMSUNG-SGH-I747
loserskater said:
It looks like root and custom recovery are still accessible which is a good sign.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Correct. Root is holding fine after CF Auto-Root. And I installed both TWRP and CWM, both of which are working fine.
Just curious my friend when you say rename zip do you mean rename this 2400258.zip to update.zip and then flash it then use odin to to install CF Auto-Root?
Venom0642 said:
Just curious my friend when you say rename zip do you mean rename this 2400258.zip to update.zip and then flash it then use odin to to install CF Auto-Root?
Click to expand...
Click to collapse
Yes sir.
Edit:
I just renamed the zip file and simplified the instructions.
Edit:
install fails on rooted 4.1.1 with cwm, will try with fresh install of 4.1.1
upndwn4par said:
Yes sir.
Edit:
I just renamed the zip file and simplified the instructions.
Click to expand...
Click to collapse
Thanks all good now and Rooted on update Stock
Thank you sir .. my wifi here stinks out loud just saved me a lot of trouble .
{edit} cept its a wipe update ;-(
upndwn4par said:
Yes sir.
Edit:
I just renamed the zip file and simplified the instructions.
Click to expand...
Click to collapse
Thanks again Got CWM Recovery Rooted with Latest AT&T 4.1.2 As you can see Baseband version:I747UCDMG2 In my my Deadly Venom Custom Rom! :good:
Works fine when updated from 4.1.1 stock recovery, thanks! also it wipes all user setings and data.
nice! EXCEPT for deleting all my apps and ****!
update: but worth it, runs much smoother, and some games like Jewels Deluxe, which is easily the best Jewels out there now work again
Strange, but I was on stock 4.1.1 with root and clockwork. Did the OTA, when installing the phone reboots into CW recovery. Asks if I want to install untrusted zip. Choose yes ands CW installed the update. Then warns that I could lose root....fix? Chose yes and CW kept my root. Did this work do anyone else?
sent from my S3 Sammy Bean.
Should have a flashable zip of this by tomorrow evening. I've been tackling this thing all night, (5 a.m. here) and I have successfully dumped everything I need and am working on setting it up in the kitchen. I've pulled the modem but I'm too afraid to test at the moment. It's 60 MB, yet all of the other modems are ~40 MB. Getting pretty exhausted so I'll have to take a break soon.
Venom0642 said:
Thanks again Got CWM Recovery Rooted with Latest AT&T 4.1.2 As you can see Baseband version:I747UCDMG2 In my my Deadly Venom Custom Rom! :good:
Click to expand...
Click to collapse
I hope you don't mind if I pull this modem out from your ZIP and put it on my modem list? I don't have an AT&T device myself, so I have to rely on others to post the AT&T updates.
hi .,,. !!
i am new to rooting
recently i rooted my note 2 ., but as official update has been released , now i want to update my phone to official jb 4.3 but i cant as it says that my device is modified,.,.
please help me i getting jb 4.3 update,,. my binary count is 5
can anyone telll proper unroot guide and getting warranty back ,.., both ,.,. i have researched a bit and found that tingle away is highly risky
i dont want to loose my phone,.,.
i am extremely scared,.,.
please help !!!
why the hell you root at first if you scared to take the risk.
since you already root, just instal triangle away..and reset the counter..then flash stock rom..thats all
there so many guide out there..just search for it.
btw, flashing with odin is more risky than reset the counter with triangle away.
sora9009 said:
why the hell you root at first if you scared to take the risk.
since you already root, just instal triangle away..and reset the counter..then flash stock rom..thats all
there so many guide out there..just search for it.
btw, flashing with odin is more risky than reset the counter with triangle away.
Click to expand...
Click to collapse
oh man .,,.,. why are you scaring me..,.,,. and i am scared because this is may first expensive phone,.,. i don't want to loose it.
btw thnks for reply ... and please answer one more question ,..,
i know that triangle away works on rooted phone and resets counter but if i reset my counter to 0 and then flash stock rom, would'nt it sets my counter to 1 as i have flashed my phone ?? and then i have to root my phone again .,.,n triangle stuff again and again ???
i am confused.,,.
vari217 said:
oh man .,,.,. why are you scaring me..,.,,. and i am scared because this is may first expensive phone,.,. i don't want to loose it.
btw thnks for reply ... and please answer one more question ,..,
i know that triangle away works on rooted phone and resets counter but if i reset my counter to 0 and then flash stock rom, would'nt it sets my counter to 1 as i have flashed my phone ?? and then i have to root my phone again .,.,n triangle stuff again and again ???
i am confused.,,.
Click to expand...
Click to collapse
do not worry mate..flashing official rom will not raise the counter
sora9009 said:
do not worry mate..flashing official rom will not raise the counter
Click to expand...
Click to collapse
thnx for your super fast reply friend.,., !!
one more thing i have Philz recovery will it be a problem ??
and if i have change it to stock recovery ,,., than when ?? i mean before triangle way or after trangle away but before flashin stock rom ?
vari217 said:
thnx for your super fast reply friend.,., !!
one more thing i have Philz recovery will it be a problem ??
and if i have change it to stock recovery ,,., than when ?? i mean before triangle way or after trangle away but before flashin stock rom ?
Click to expand...
Click to collapse
1st use the triangle away..after done reset, triangle away will give you option to reboot or go to download mode.You click go to download mode and then flash stock rom.
If you choose reboot,the counter will raise again.
sora9009 said:
1st use the triangle away..after done reset, triangle away will give you option to reboot or go to download mode.You click go to download mode and then flash stock rom.
If you choose reboot,the counter will raise again.
Click to expand...
Click to collapse
and what about Philz recovery ??? how to go back to stock recovery ,..,
as i have read that if you have custome recovery than your binery count will remain 1 and not come to 0 !!
ouhh forgot to tell you if you have custom kernel like perseus installed, you can reset directly in the application itself.
if not,the application will take you to triangle away special mode..something like that..then you can reset it there
---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------
vari217 said:
and what about Philz recovery ??? how to go back to stock recovery ,..,
as i have read that if you have custome recovery than your binery count will remain 1 and not come to 0 !!
Click to expand...
Click to collapse
when you flash stock rom, your custom recovery will be overwrite with the stock recovery..thats why i recommend you to flash stock rom.
sora9009 said:
ouhh forgot to tell you if you have custom kernel like perseus installed, you can reset directly in the application itself.
if not,the application will take you to triangle away special mode..something like that..then you can reset it there
---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------
when you flash stock rom, your custom recovery will be overwrite with the stock recovery..thats why i recommend you to flash stock rom.
Click to expand...
Click to collapse
ohh k
now i got it ,.,. i just give it a shot .,, and let you know
thanks for giving your valuable time !! thanks once again ,..,
vari217 said:
ohh k
now i got it ,.,. i just give it a shot .,, and let you know
thanks for giving your valuable time !! thanks once again ,..,
Click to expand...
Click to collapse
you are welcome and good luck friend.
sora9009 said:
you are welcome and good luck friend.
Click to expand...
Click to collapse
i have un rooted my device and updated to jb 4.3.,,,. but now the main problem is that ,.,. it dosent have air command for which i was updating !!.,.,.
is there any odexed rom which have air command and other note 3 features ??
vari217 said:
i have un rooted my device and updated to jb 4.3.,,,. but now the main problem is that ,.,. it dosent have air command for which i was updating !!.,.,.
is there any odexed rom which have air command and other note 3 features ??
Click to expand...
Click to collapse
no
and since you already flash official 4.3..u can't either downgrade to 4.1.2 or flashing any custom rom,kernel and recovery without triggered the knox..
if you said you wanna note 3 features before, i will recommend you DN3 rom..thats why make a research 1st mate,,do not blindly flashing.
sora9009 said:
no
and since you already flash official 4.3..u can't either downgrade to 4.1.2 or flashing any custom rom,kernel and recovery without triggered the knox..
if you said you wanna note 3 features before, i will recommend you DN3 rom..thats why make a research 1st mate,,do not blindly flashing.
Click to expand...
Click to collapse
ohh man....
so now I cant have note 3 features...ummmmm:
And what do you mean by trigring knox... I thought the official 4.3 is having note 3 features...
read it here
http://omegadroid.co/wanted-knox-void-warranty-0x1/
if samsung put note 3 features in note 2, who gonna buy note 3..since note 2 more cheaper now.
sora9009 said:
read it here
http://omegadroid.co/wanted-knox-void-warranty-0x1/
if samsung put note 3 features in note 2, who gonna buy note 3..since note 2 more cheaper now.
Click to expand...
Click to collapse
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
vari217 said:
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
Click to expand...
Click to collapse
Yes u can man if warranty is not an issue for you
but before flashing rom read carefully every instruction on the page
http://forum.xda-developers.com/showthread.php?t=2504016
this is dn3 rom i have installed it very good one
vari217 said:
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
Click to expand...
Click to collapse
of course you can install custom rom..
its your phone, all the risk is responsible by you anyway.
I also want to return to stock after custom ROM too. I am a little scared of using Triangle away. Seems very complicated and I always mess somting up when flashing.
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
The android version it shows is 4.3.1 and im able to use it normally with the cyanogenmod.
What can I do to flash a stock rom back?
EDIT: used triangle away and the custom binary download says "no" now and the current binary says "samsung official" but still get the same problem.
Thank You
bryangd07 said:
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
Thank You
Click to expand...
Click to collapse
You need to flash a stock ROM that has no boot loader attached to it. I just reverted my S3 back to stock from CM11 so that I could sell it. Flash a Rom.zip through recovery and it should work fine. I see you are ATT so I suggest this one: http://forum.xda-developers.com/showthread.php?t=2540998. You have the choice of Stock Rooted without bootloader which is what you will be looking for. This thread also has everything you may need. Do not attempt to use Odin to flash roms with older bootloaders or you will find major issues.
You will almost definitely need to wipe everything so back everything up and be sure to take a Nandroid.
BCSC said:
You need to flash a stock ROM that has no boot loader attached to it. I just reverted my S3 back to stock from CM11 so that I could sell it. Flash a Rom.zip through recovery and it should work fine. I see you are ATT so I suggest this one: http://forum.xda-developers.com/showthread.php?t=2540998. You have the choice of Stock Rooted without bootloader which is what you will be looking for. This thread also has everything you may need. Do not attempt to use Odin to flash roms with older bootloaders or you will find major issues.
You will almost definitely need to wipe everything so back everything up and be sure to take a Nandroid.
Click to expand...
Click to collapse
thanks for answering, sorry i dont know much about this, can you tell me which one has no bootloader on it?
bryangd07 said:
thanks for answering, sorry i dont know much about this, can you tell me which one has no bootloader on it?
Click to expand...
Click to collapse
In that thread you have 2 good options that I can see. Scroll down and you will find one ROM by upndwn4par/full and another debloated directly under it. Which you chose depends on if you want Samsung/ Google software on it. The upndwn4par file will have you closer to stock than the other. Please be sure to read a couple pages, even if you don't get any immediate knowledge from it you will become way more familiar with these processes. It's worth the time, and safer for your phone.
BCSC said:
In that thread you have 2 good options that I can see. Scroll down and you will find one ROM by upndwn4par/full and another debloated directly under it. Which you chose depends on if you want Samsung/ Google software on it. The upndwn4par file will have you closer to stock than the other. Please be sure to read a couple pages, even if you don't get any immediate knowledge from it you will become way more familiar with these processes. It's worth the time, and safer for your phone.
Click to expand...
Click to collapse
Thanks once again, i will download the debloated one. But I have a question, that won't be a stock rom right? If the bootloader is the problem is there a stock d2att 4.3 rom i can flash?
That is a stock ROM. It is just pre rooted with knox removed. It is a modified version of the Stock OTA with the problematic parts removed..
BCSC said:
That is a stock ROM. It is just pre rooted with knox removed. It is a modified version of the Stock OTA with the problematic parts removed..
Click to expand...
Click to collapse
how do i flash this rom? using the phone recovery(VU+home+power) ?
EDIT: i tried that and it failed the verification
What recovery are you using? Latest CWM?
BCSC said:
What recovery are you using? Latest CWM?
Click to expand...
Click to collapse
i don't know, the original i guess
bryangd07 said:
i don't know, the original i guess
Click to expand...
Click to collapse
You need a custom recovery to flash this. CWM or TWRP. I'm not too sure how you got to CM without one but be sure you have one and then flash the Rom from above. You can install CWM with the app 'Rom Manager'.
See here http://forum.xda-developers.com/showthread.php?t=2538991
BCSC said:
You need a custom recovery to flash this. CWM or TWRP. I'm not too sure how you got to CM without one but be sure you have one and then flash the Rom from above. You can install CWM with the app 'Rom Manager'.
See here http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I installed CWM but now that i used cyanogen for a while im starting to like it. The only thing that I dont like is the music player. I downloaded google play but it is even worst, my playlists are not even in order. Is there any way of flashing the stock samsung music player on cyanogenmod or is it integrated with the touchwiz?
Thanks for all the help you gave me so far.
EDIT: I found this thread about ported s4 apps: http://forum.xda-developers.com/showthread.php?t=2267029, can i just flash it with CWM using cyanogenmod?
You can not flash that S4 port. It says it is specifically for the Galaxy advance. Also you are correct that the Samsung player requires Touchwiz. Try Power Amp, it has pretty good reviews and features. A 3rd party player is probably your best bet. You can cherry pick for features
BCSC said:
You can not flash that S4 port. It says it is specifically for the Galaxy advance. Also you are correct that the Samsung player requires Touchwiz. Try Power Amp, it has pretty good reviews and features. A 3rd party player is probably your best bet. You can cherry pick for features
Click to expand...
Click to collapse
I tried a lot of players and didn't like any. Flashed the ROM you indicated using CWM and it worked. Did it all for the player Everything is working fine now and I really like how it doesn't have all the bloatware from att.
Thank you very much for the help.
bryangd07 said:
I tried a lot of players and didn't like any. Flashed the ROM you indicated using CWM and it worked. Did it all for the player Everything is working fine now and I really like how it doesn't have all the bloatware from att.
Thank you very much for the help.
Click to expand...
Click to collapse
No problem dude. I always found myself going back to Touchwiz as well. Let me know if you need more help.
Hello,
What should I do to flash cwm to my phone.
Every step I follow not work! [pHIL recovery/chotu recovery/twrp].
The phone keep jump to touch wiz 4.2.2.. What I need to do? Sell it? or keep it?
My S3 just worked without this problem.. What the best solution to fix this problem?
Thx.
Did you remember to untick Auto Reboot in Odin? Are you planning to install a custom ROM?
lala458 said:
Hello,
What should I do to flash cwm to my phone.
Every step I follow not work! [pHIL recovery/chotu recovery/twrp].
The phone keep jump to touch wiz 4.2.2.. What I need to do? Sell it? or keep it?
My S3 just worked without this problem.. What the best solution to fix this problem?
Thx.
Click to expand...
Click to collapse
Untick auto reboot, pull the battery then insert it, press volume up+home+power and install root package to keep cwm available
Sent from my GT-I9082 using Tapatalk
black87 said:
Untick auto reboot, pull the battery then insert it, press volume up+home+power and install root package to keep cwm available
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Well if he's planning to install a custom AOSP-based ROM then flashing a root package isn't required... correct me if I'm wrong.
naufalhadyan said:
Well if he's planning to install a custom AOSP-based ROM then flashing a root package isn't required... correct me if I'm wrong.
Click to expand...
Click to collapse
Root package is just to lock cwm so it will not lost if he boot it
black87 said:
Root package is just to lock cwm so it will not lost if he boot it
Click to expand...
Click to collapse
CWM is overwritten with stock recovery by the stock ROM. So if you don't have stock ROM it's kinda useless...
After flashing a custom ROM, all that's left unmodified on the device is just the bootloader... I don't think a bootloader can overwrite CWM to a stock recovery.
naufalhadyan said:
CWM is overwritten with stock recovery by the stock ROM. So if you don't have stock ROM it's kinda useless...
After flashing a custom ROM, all that's left unmodified on the device is just the bootloader... I don't think a bootloader can overwrite CWM to a stock recovery.
Click to expand...
Click to collapse
but he seems not plan to install custom rom
Thanks everyone because reply my question. FYI, I just flash philz touch recovery and it worked fine. The sad is, I lost this phone last month.
Hello everyone, I have recently bought a galaxy s4 mini GT-I9195 and i want to flash a custom kernel like this one here: http://forum.xda-developers.com/showthread.php?t=2636890 ... First, do I have to check if my bootloader is locked or unlocked? Or i just flash it via Odin rightaway? Yesterday I rooted it using CF-Auto-Root.. Please, if anyone can help me out, i would really appreciate it because i have no experience on flashing on sammy devices and i am reeally confused :crying:.. I have been searching like the WHOLE internet to find a solution but came up with nothing.. Thanks in advance :laugh:
Panos97 said:
Hello everyone, I have recently bought a galaxy s4 mini GT-I9195 and i want to flash a custom kernel like this one here: http://forum.xda-developers.com/showthread.php?t=2636890 ... First, do I have to check if my bootloader is locked or unlocked? Or i just flash it via Odin rightaway? Yesterday I rooted it using CF-Auto-Root.. Please, if anyone can help me out, i would really appreciate it because i have no experience on flashing on sammy devices and i am reeally confused :crying:.. I have been searching like the WHOLE internet to find a solution but came up with nothing.. Thanks in advance :laugh:
Click to expand...
Click to collapse
You must flash thru recovery.
Here the installation steps, but first you must flash a custom recovery like this or other, its up to you.
Installation instructions
- Copy f4ktion_1.4.0-xxx.zip to your SDCARD
- Reboot into CWM recovery
- Choose "Install zip from sdcard"
- Select f4ktion_1.4.0-xxx.zip kernel and confirm installation.
Click to expand...
Click to collapse
R_a_z_v_a_n said:
You must flash thru recovery.
Here the installation steps, but first you must flash a custom recovery like this or other, its up to you.
Click to expand...
Click to collapse
Thank you so much So all i have to do is flash the recovery in Odin.. But since my s4 mini is rooted, do i have to install the S4Mini_RootKit_V2.zip?? i mean if I do, will it conflict with the SuperSU i have previously installed on my device? Or just overwrite it and work like a charm? Sorry I'm asking like too many questions, but since i'm new here i need some guidance
Btw, how do i know if my bootloader is unlocked? Before I buy this s4 mini i owned an Xperia go and to install a kernel i had to unlock the BL.. I don't know if the same thing applies for sammy devices, just asking:angel:
Panos97 said:
Thank you so much So all i have to do is flash the recovery in Odin.. But since my s4 mini is rooted, do i have to install the S4Mini_RootKit_V2.zip?? i mean if I do, will it conflict with the SuperSU i have previously installed on my device? Or just overwrite it and work like a charm? Sorry I'm asking like too many questions, but since i'm new here i need some guidance
Btw, how do i know if my bootloader is unlocked? Before I buy this s4 mini i owned an Xperia go and to install a kernel i had to unlock the BL.. I don't know if the same thing applies for sammy devices, just asking:angel:
Click to expand...
Click to collapse
No, we have bootloader unlocked, so you don't need to unlock anything.
No, try with this recovery if you afraid to not doing some conflicts:
[i919x][CWM Advanced Edition] PhilZ Touch
Download philz_touch_6.07.9-serranoltexx.tar.md5
boot into download mode
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into main system and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing the 3 buttons combo to for a reboot into recovery.You should see the new CWM
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
Click to expand...
Click to collapse
R_a_z_v_a_n said:
No, we have bootloader unlocked, so you don't need to unlock anything.
No, try with this recovery if you afraid to not doing some conflicts:
[i919x][CWM Advanced Edition] PhilZ Touch
Click to expand...
Click to collapse
So after i install the philz touch recovery, can i install ths deodexed rom http://www.s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html which comes with a custom kernel (vikinger)? will there be a problem with it because the rom is based on BML1 and my current fw is BNB3? thank you very much :silly:
Panos97 said:
So after i install the philz touch recovery, can i install ths deodexed rom http://www.s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html which comes with a custom kernel (vikinger)? will there be a problem with it because the rom is based on BML1 and my current fw is BNB3? thank you very much :silly:
Click to expand...
Click to collapse
Really, i don't know for sure, BUT in my previous phone (S Advance I9070) i have some errors when i flashed different baseband deodexed.
Make a nandroid backup after you have custom recovery, and you can try it. If something going wrong, restore your backup and all will just like before.
R_a_z_v_a_n said:
Really, i don't know for sure, BUT in my previous phone (S Advance I9070) i have some errors when i flashed different baseband deodexed.
Make a nandroid backup after you have custom recovery, and you can try it. If something going wrong, restore your backup and all will just like before.
Click to expand...
Click to collapse
Ok then! I will try and see, maybe sometime after i try doing it, i will post here how it went.. Thank you very much for being so kind as to answering all my noob-full questions :silly: :good:
If you flash a custom recovery your device's Knox counter will be triggered to 0x1