Develop Bugs

cannot reset

Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.

ulise73 said:
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
Click to expand...
Click to collapse
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.

jimbo77 said:
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
Click to expand...
Click to collapse
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!

ulise73 said:
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
Click to expand...
Click to collapse
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...

jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
hi,
i have the same problem, i tried your solution, but it didn't work
the huawei logo is on all the time, when i reset by pressing the on/off button several seconds, it start, en keeps restart. till the logo upears, en than it stops. not reconized trough usb, and not to turn off...
sorry for my bad english

Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.

ZuperStyler said:
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
Click to expand...
Click to collapse
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.

cowe said:
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
Click to expand...
Click to collapse
Install the drivers, or open HiSuite, that should do it.

I tried to do that. cmd but it says:
adb server did not ack
unkown host service.

jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have

iscaac said:
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
Click to expand...
Click to collapse
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app

husen4u said:
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
is there something im doing wrong here HELP PLEASE

iscaac said:
is there something im doing wrong here HELP PLEASE
Click to expand...
Click to collapse
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...

jimbo77 said:
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
Click to expand...
Click to collapse
I still get same error message when I try to flash kernel and recovery

ASUS Fonepad 7 FE170CG firmware need please help

hello dear sir
i have ASUS Fonepad 7 FE170CG
so i download
all firmware from here
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_FE170CG/HelpDesk_Download/
but can not know how to flsah my device
plz help thanx

any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img

nokia alkng said:
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
Click to expand...
Click to collapse
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)

edors said:
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
Click to expand...
Click to collapse
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate

vks.sud said:
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
Click to expand...
Click to collapse
Rename your downloaded firmware to K012_sdupdate.zip then copy to your MICROSD. Now you just have to go into droidboot mode.
Follow the step below to go into droidboot. (Start by turn off your device).
1. If you had never update to kitkat before, go into droidboot by holding VOL DOWN + POWER until droidboot menu is present.
2. If you have update to kitkat before (or currently on kitkat), boot into droidboot by holding VOL UP + POWER until menu is present.
Next step depend on menu that appear on your droidboot menu:
1. If you had SD UPDATE option presented on the MOST BELOW option, go on and select it. (Beware, you should choose SD UPDATE not SD DOWNLOAD)
2. If your menu doesnt show SD UPDATE, then you had to choose RECOVERY.
I think thats all to do, your device must have start the update process by now.
CMIIW

But there is no recovery mode in this device like cwm or twrp..............
have a look.....
in the video below i have started in recovery without puting the firmware archieve in sdcard....will it surely work...
and one thing more is there ant way to install cwm or twrp or any other recovery on this device......

Flash fonepad firmware
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck

Ali Erfani said:
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Click to expand...
Click to collapse
but this can be done when the device starts what if it is in bootloop or hang on boot logo

vks.sud said:
but this can be done when the device starts what if it is in bootloop or hang on boot logo
Click to expand...
Click to collapse
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.

Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???

vks.sud said:
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
Click to expand...
Click to collapse
I mean before you had this problem. The fastboot menu is different for Android 4.3 and 4.4
I don't know if there is a custom ROM for this tablet or not!!!

Help! I cant access my fastboot, how can flash rom? Or is there a way to flash flashboot? Thanks
Everyime i turn on my device its just usb icon them turns off.

Thank You!
Your procedure worked perfectly.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse

some thing wrong
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10

alirezajalilii said:
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
Click to expand...
Click to collapse
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------

HELP
neondragon1909 said:
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
Click to expand...
Click to collapse
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
What can i do if the device is unknown and fail to communicate with device?I follow the steps but ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2 cannot be install,0 files copied when installing adb and fastboot ?HELP!

Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img)
I cannot find these three .img files.Where can i download them?

Hello, do you knw which rom without all the asus bloatware I could install ?
My fonepad 7 is rooted but when I uninstall the shiiite asus programs they come back on restart.
Please help <3

I did the procedure and now is with this screen
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse

arthurmdiniz said:
i did the procedure and now is with this screen
Click to expand...
Click to collapse
where can i dl the three .img help!!!!!!!!!!

[BIG PROBLEM] Zenfone 2 Reboots on Uninstall

Hello, I will explain everything in this video.
Video Link on YouTube : https://www.youtube.com/watch?v=jXS3UT4xOn4
And is there a way to fully flash this phone? and make it fully CN version.
And I also need a way to update my firmware, this phone is still running 2.13.

Help, anyone?

Hello, I just saw your video, just flash CN version firmware it's like 1.10 GB through adb sideload from PC. Maybe your problem it's just a software problem. Give a try. If you need help just reply, I'll post full detailed written tutorial here with all the cmd codes.

Akashami03 said:
Hello, I just saw your video, just flash CN version firmware it's like 1.10 GB through adb sideload from PC. Maybe your problem it's just a software problem. Give a try. If you need help just reply, I'll post full detailed written tutorial here with all the cmd codes.
Click to expand...
Click to collapse
Hi, thank you for your kind reply. Could you please provide me with the link of the latest CN Firmware along with a tutorial on how to flash my device. Thank you so much!

http://forum.xda-developers.com/showthread.php?p=61687943
There's stock firmware for your phone. Flash any firmware ending in CN for your phone

ClarnTV said:
Hi, thank you for your kind reply. Could you please provide me with the link of the latest CN Firmware along with a tutorial on how to flash my device. Thank you so much!
Click to expand...
Click to collapse
full Frimware but not the latest, You can update later Via taking OTA if your problem solved : V2.19.40.20 CN ( i get the link from here )
1. First install the Asus drives and ADB on PC ( i get below link from here )
USB Drivers:
Asus USB Drivers V2.0Driver
Troubleshooting Guide
2. Make sure USB Debugging is checked on.
3. place the frimware file inside the folder of where ADB is placed.
4. Manually go to recovery by shutdown the phone, then hold power + vol up until vibrate, after the vibrate take finger from power button and contiune hold vol up untill phone again restate. the phone now restart into revovery where the top rectangle box options change when you press vol up and down. get the recovery option and press power. now you see error android logo. then hold power and press volume up, u ill see the recovery settings.
5. do wipe/factory reset and wipe cashe
6. after that connet phone to pc.
7. open the ADB folder the you put frimware. hold shift button and press right click. click open command promt here.
8. type " adb devices " for just checking Command promt work or not with phone.
9. type " fastboot " ( here also nothing will happen on the phone )
10. Now in your phone using yoyr vul key and power key select adb sideload on the list of settings on the phone.
11. now in command promt type " adb sideload file.zip " ( file is the name of the file name, if file name is asdfgh.zip then " adb sideload asdfgh.zip " )
12. its takes time to flash then its reboots to phone like for the fist time.
13. after flash take OTA updates.

Akashami03 said:
full Frimware but not the latest, You can update later Via taking OTA if your problem solved : V2.19.40.20 CN ( i get the link from here )
1. First install the Asus drives and ADB on PC ( i get below link from here )
USB Drivers:
Asus USB Drivers V2.0Driver
Troubleshooting Guide
2. Make sure USB Debugging is checked on.
3. place the frimware file inside the folder of where ADB is placed.
4. Manually go to recovery by shutdown the phone, then hold power + vol up until vibrate, after the vibrate take finger from power button and contiune hold vol up untill phone again restate. the phone now restart into revovery where the top rectangle box options change when you press vol up and down. get the recovery option and press power. now you see error android logo. then hold power and press volume up, u ill see the recovery settings.
5. do wipe/factory reset and wipe cashe
6. after that connet phone to pc.
7. open the ADB folder the you put frimware. hold shift button and press right click. click open command promt here.
8. type " adb devices " for just checking Command promt work or not with phone.
9. type " fastboot " ( here also nothing will happen on the phone )
10. Now in your phone using yoyr vul key and power key select adb sideload on the list of settings on the phone.
11. now in command promt type " adb sideload file.zip " ( file is the name of the file name, if file name is asdfgh.zip then " adb sideload asdfgh.zip " )
12. its takes time to flash then its reboots to phone like for the fist time.
13. after flash take OTA updates.
Click to expand...
Click to collapse
Hi, thank you so much for all this Akashami. I'm very thankful, I really appreciate your help!
However, as I said I'm still new to this, I'm stuck in step 7. Where should I put the firmware? And I still didn't understand what to do and how to open command promt using the shif and right click. Could you please send me a picture for the 7th step.

Akashami03 said:
full Frimware but not the latest, You can update later Via taking OTA if your problem solved : V2.19.40.20 CN ( i get the link from here )
1. First install the Asus drives and ADB on PC ( i get below link from here )
USB Drivers:
Asus USB Drivers V2.0Driver
Troubleshooting Guide
2. Make sure USB Debugging is checked on.
3. place the frimware file inside the folder of where ADB is placed.
4. Manually go to recovery by shutdown the phone, then hold power + vol up until vibrate, after the vibrate take finger from power button and contiune hold vol up untill phone again restate. the phone now restart into revovery where the top rectangle box options change when you press vol up and down. get the recovery option and press power. now you see error android logo. then hold power and press volume up, u ill see the recovery settings.
5. do wipe/factory reset and wipe cashe
6. after that connet phone to pc.
7. open the ADB folder the you put frimware. hold shift button and press right click. click open command promt here.
8. type " adb devices " for just checking Command promt work or not with phone.
9. type " fastboot " ( here also nothing will happen on the phone )
10. Now in your phone using yoyr vul key and power key select adb sideload on the list of settings on the phone.
11. now in command promt type " adb sideload file.zip " ( file is the name of the file name, if file name is asdfgh.zip then " adb sideload asdfgh.zip " )
12. its takes time to flash then its reboots to phone like for the fist time.
13. after flash take OTA updates.
Click to expand...
Click to collapse
Another question where is the ADB Folder?
I've installed all the drivers, and I have download the firmware. Should I just open CMD.exe and type adb devices?

Akashami03 said:
11. now in command promt type " adb sideload file.zip " ( file is the name of the file name, if file name is asdfgh.zip then " adb sideload asdfgh.zip " )
.
Click to expand...
Click to collapse
It says :
loading "rom.zip"
* Cannot read "rom.zip *
And yes I have renamed it to rom.

ClarnTV said:
It says :
loading "rom.zip"
* Cannot read "rom.zip *
And yes I have renamed it to rom.
Click to expand...
Click to collapse
Sorry for late reply, if you still need help sent mess in hangouts, I'll help you in live chat. [email protected]

Stock Firmware of LeTv Le1S x507&x509 Sp Flashable Indian Version 100% tested

100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
​
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition​
Firmware x507&x509 5.5.014s:- ​
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-​
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view​
Mtk Preloder Driver:-​​
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-​​
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................​​

after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger

Followed everything, but not able to install recovery

https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................

jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery

Where should i enter fastboot -w ???

Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...

Ubd debugging​ not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro

https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it

Thanks , My device is X500. Can i flash it?

I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?

hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file

phone is dead after flash model x509

nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone

mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error

My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?

Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays

Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}

Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!

NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
​
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition​90
Firmware x507&x509 5.5.014s:- ​
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-​
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view​
Mtk Preloder Driver:-​​
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-​​
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................​​
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls

Repair your ROG2 phone with EDL mode，Official firmware！

Success is disgusted by some people, and will not share any files for free in the future.

Success!!!
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.

greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
Hi is the ASUS_ROG2_ZS660KL_QPST_Firmware\images
Folder in the zip you posted? Where do I find it?

PJay83 said:
Hi is the ASUS_ROG2_ZS660KL_QPST_Firmware\images
Folder in the zip you posted? Where do I find it?
Click to expand...
Click to collapse
The first entry of this thread.

Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW

cheetah2k said:
Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW
Click to expand...
Click to collapse
ww

greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
Yes

cheetah2k said:
Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW
Click to expand...
Click to collapse
I think you're right.
---------- Post added at 07:56 AM ---------- Previous post was at 07:53 AM ----------
greywookiee said:
I think you're right.
Click to expand...
Click to collapse
Though, you still want to be able to do updates and stuff without needing someone to break all the files out into separate images. This was a huge life saver thanks to John.

Please help me. I have widevine security L3 instead of L1 (also at relock bootloader). Here is what happen to me:
1. Unlock the bootloader and get persist.img, but wrong size of package then i have lost the serial number (C4ATAS000000). The size of persist file is 16mb instead of 32mb by default.
2. Try to get another persist.img from another device, then use Ultra editor to find and change back to my real Serial Number. And it worked.
3. Figure out widevine security is always stay at L3, whenever bootloader is re-locked. Also Asus unlock bootloader apk from asus homepage is not working, it said "error network".
4. Do flash raw from all version, also factory reset...etc but no luck.
.............................................
Do you know what is really happened when we flash wrong persist.img and flash another persist (which is already change Serial number back to real one)?

Mistake

If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pk...Sf6cDq7SuJiBBu
Click to expand...
Click to collapse
godmode post! thank you sir! Fixed my bricked rog 2

johnny886 said:
If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pkt2k82JtK66DzJn3tSf6cDq7SuJiBBu
Click to expand...
Click to collapse
How do I change To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use.

ltth said:
How do I change To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use.
Click to expand...
Click to collapse
Thanks!

ltth said:
Thanks!
Click to expand...
Click to collapse
Hi, I've managed to unbrick my ROG Phone II Tencent Edition 8/128 with a locked bootloader having "slot _a" error. Provided that you can do fastboot.
My equipment for flashing, for sure you already have ADB installed in your computer, my computer is an x64 Intel Windows 10 laptop, I used USB 2.0 not USB 3.0
Credit to @johnny886 for the sharing the tool,
"If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use, -(I personally :did" not change anything, I just downloaded the file and followed grewookie's instruction below )
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link: https://drive.google.com/open?id=1Pk...Sf6cDq7SuJiBBu"
Credits to @greywookiee for the super clear instruction:
"Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\imag es"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done."

followed the steps until number 8 after i clicked refresh the MI app stopped responding (not responding).. dont know what im doing wrong..

tuannghia1985 said:
Please help me. I have widevine security L3 instead of L1 (also at relock bootloader). Here is what happen to me:
1. Unlock the bootloader and get persist.img, but wrong size of package then i have lost the serial number (C4ATAS000000). The size of persist file is 16mb instead of 32mb by default.
2. Try to get another persist.img from another device, then use Ultra editor to find and change back to my real Serial Number. And it worked.
3. Figure out widevine security is always stay at L3, whenever bootloader is re-locked. Also Asus unlock bootloader apk from asus homepage is not working, it said "error network".
4. Do flash raw from all version, also factory reset...etc but no luck.
.............................................
Do you know what is really happened when we flash wrong persist.img and flash another persist (which is already change Serial number back to real one)?
Click to expand...
Click to collapse
请问要怎么得到另一个设备的persist.img，然后怎么编辑sn，最后要怎么写入手机？有具体的步骤 吗
Mod Traduction :
May I ask how to get the persist.img of another device, then how to edit the sn, and finally how to write it to the phone? Are there specific steps?
Click to expand...
Click to collapse

葫芦娃搞奥特曼 said:
请问要怎么得到另一个设备的persist.img，然后怎么编辑sn，最后要怎么写入手机？有具体的步骤 吗
Click to expand...
Click to collapse
Get another user persist.img (with correct 32.768 kb)
Using HEX editor or Ultra Edit to find SSN, ISN and IMEI in persist.img
Return to fastboot - then 9008 mode, use bat to write back to your phone and you will have back Asus unlock bootloader apk (working), have Serial number back.
For question: "How could i find real SSN, ISN and real IMEI?"
Please use command "fastboot oem device-info" in fastboot mode, it will show your real information.
Br,

greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
johnny886 said:
If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pkt2k82JtK66DzJn3tSf6cDq7SuJiBBu
Click to expand...
Click to collapse
Just 2 doubts:
1. Will I get OTA update after doing this?
2. I am on A10 Beta 6. will It be successful to roll back to this firmware?

Hi in Mi Flash when i refresh and select flash it gives me an error object reference not set to an instance of an object please help me

Help
Gives me Sarahah error on QPST and also gives a flash error on MI flash