hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
salahddine said:
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
Click to expand...
Click to collapse
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Larry2999 said:
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Click to expand...
Click to collapse
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
salahddine said:
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
Click to expand...
Click to collapse
You updated to 4.3 by going over the air or via Odin?
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Larry2999 said:
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Click to expand...
Click to collapse
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
salahddine said:
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
Click to expand...
Click to collapse
Sorry, my initial assessment was wrong. The 623MB zip you flashed was not the OTA file but the stock ROM which should have been flashed along with the modem and kernel zips at the same time. The reason for the initial failure was likely because you did not flash the kernel (and modem) zips. Glad to know it's working fine now.
Related
Hello, is there any way to get full Odin flashable custom ROM for sm-p605. I need bootloader, boot.img, cache.img etc. My device cannot boot, it stucks on samsung-galaxy-note-10.1-2014 edition logo, except in one of the ROM's it boots only once and gets error like - com.system... stopped working.... Thankyou.
Tautvaldas said:
Hello, is there any way to get full Odin flashable custom ROM for sm-p605. I need bootloader, boot.img, cache.img etc. My device cannot boot, it stucks on samsung-galaxy-note-10.1-2014 edition logo, except in one of the ROM's it boots only once and gets error like - com.system... stopped working.... Thankyou.
Click to expand...
Click to collapse
Just flash a stock firmware and you should be fine.
nickwarn said:
Just flash a stock firmware and you should be fine.
Click to expand...
Click to collapse
Stock firmware does not flashes via Odin, doesn't works.
Tautvaldas said:
Stock firmware does not flashes via Odin, doesn't works.
Click to expand...
Click to collapse
Make sure you have exited Kies before you flash as this will screw up the flash...
I'm assuming your tablet isn't rooted? If so a custom rom won't flash anyway as the signature verification will stop it...
If you have got root then flash TWRP, load a custom rom onto your sd card and flash that....
ultramag69 said:
Make sure you have exited Kies before you flash as this will screw up the flash...
I'm assuming your tablet isn't rooted? If so a custom rom won't flash anyway as the signature verification will stop it...
If you have got root then flash TWRP, load a custom rom onto your sd card and flash that....
Click to expand...
Click to collapse
I can flash anything except official firmware, Custom ROM's does not work, I think it is MMC damage or bootloader, I dont know what it is.
Tautvaldas said:
I can flash anything except official firmware, Custom ROM's does not work, I think it is MMC damage or bootloader, I dont know what it is.
Click to expand...
Click to collapse
You need to know what firmware you were on and what the highest firmware you tried to flash was as this will affect what you can and can't flash...
Again, make sure you have exited Kies as this will affect the flash...
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
alfares43 said:
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
Click to expand...
Click to collapse
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
alfares43 said:
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
Click to expand...
Click to collapse
Mate, flash stock JB... Don't throw a new OS into the mix... It's easier if you use what you have 1st, fix it, then upgrade...
Ok bro i will try ...
Thanks for your help
Sounds like you tried to flash a KK rom with out flashing the KK bootloader.
Hi ...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Well ...
Tilagoon said:
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Click to expand...
Click to collapse
Thanks for the reply man ... but I have flashed a stock ROM not a custom and non of my stock ROMs booted ... Thanks again
With best Wishes
Hitman1376
ive lost my computer HD and lost a bunch of stuff. as for ace ii related things, ive lost mg2 firmware, temp root, samsung drivers, custom recoveries and roms. custom recoveries and roms arent much of an issue since ace2nutzer, chronomonochrome and sergeyl are still actively developing. as for stock firmware and temp root, i cant seem to be able to find a good download site (site that supports resuming/pausing)
id like to humbly request an upload for the barebone basics such as stock firmware, temp root, odin and all the other you-need-these-to-install-custom-rom stuff to an easy to use download service (like google drive)
*EDIT*
my phone is currently out of order and it seems i need to reflash using odin. i was using ace2nutzers cm11 and ran into some issues. then i tried flashing chronokernel 4.4.2 when trying to upgrade to ace2nutzers more recent cm11 build, but im facing philz recovery error 'status 7' when trying to flash anything. it is currently systemless, with only recovery mode (philz) and download mode working
*EDIT2*
in philz it is stating my internal storage as sdcard1 and not 0. my external is called sdcard0
If you have ace2nutzer's kernel, install it by recovery, power off and boot on recovery again.
Then install the ROM you want.
I've never faced status 7 error with CWM recovery 6.0.5.0 of this kernel.
me too, only TWRP didnt work once, and chrono admitted it was a bug he couldnt fix.
i opened up the rom on my friends PC and it turned out it was a corrupted archive. CWM flashed it anyways and that was why i lost the OS. i dont understand why i couldnt just reflash a newly downloaded and checked archive but that too didnt work. i also tried installing the kernel again, rebooted and tried installing the rom again and nope. then removing the whole assert thing under updater-script, it only worked once when installing a kernel. annnd finally after a sleepless night i tried adb sideloading and fastboot recovery, it was a bad decision as now even recovery mode doesnt work -.-
theres a good thing though, download mode still works. im hoping someone can upload a stock rom somewhere safe. i read but dont understand why people say mg2 is preferred.
Mg2 is the newest base band but for your target it doesn't matter right now.
What model do you have, 8160 or 8160P with NFC?
sorry for the late reply, I needed something to get my mind off my old friend
its a standard ace ii, non P/L version
fonzacus said:
sorry for the late reply, I needed something to get my mind off my old friend
its a standard ace ii, non P/L version
Click to expand...
Click to collapse
Just install by Odin Russian gingerbread following instructions from YouTube video below.
After this, you'll have the phone like a brand new taken from the factory (at least the firmware).
Then, install any jelly bean stock you want.
And finally you can install the custom ROM you want.
Download Russian gingerbread from this link:
https://www.dropbox.com/s/3okawqmw8gbazns/I8160XXLK6.rar?dl=0
huge kudos, its all running just fine again with ace2nutzers cm11
im hoping dropbox wont die/expire
fonzacus said:
huge kudos, its all running just fine again with ace2nutzers cm11
im hoping dropbox wont die/expire
Click to expand...
Click to collapse
Don't worry about that, I uploaded this Dropbox link and I probably won't retire it for a long time.
This is the only 3 part stock firmware for GT-i8160 and it's the only ROM that can repair almost anything we "do" the phone.
Guys i need some help ASAP,today i installed a custom rom[Lineage 15] on my a5 520F and my sim card is not showing up,what can i do?
Please help me!!:crying::crying::crying::crying::crying::crying:
Dis you flashed the oreo bootloader and radio first?'cause i think you may have the nougat ones
It's probably caused by an incompatible bootloader and modem. If you just want to get it working again then probably best thing to do is find your original firmware (on Sammobile, Updato etc) and reflash it with the correct version of Odin.
If you still want to get Lineage 15 to work and you're sure you flashed the right ROM for the correct phone then you can try flashing the Oreo bootloader and modem (Lineage 15 is based on Oreo). There's a thread here with bootloaders and modems: https://forum.xda-developers.com/sa...to/ref-modems-bootloaders-collection-t3799551
Ok , so first i need to go to recovery and make a full wipe then go to download mode and install the bootloader and modem and then install the custom rom trough recovery??
TheBkueWolfe said:
Ok , so first i need to go to recovery and make a full wipe then go to download mode and install the bootloader and modem and then install the custom rom trough recovery??
Click to expand...
Click to collapse
sorry for my bad english.
Guys thank you so much,i tried installing the bootloader and modem and it worked
thank you so much :victory::victory::victory: