Develop Bugs

Please Help me to Install this custom ROM

Hello There,
I love XDA.. this site is awesome...
I want to install a ROM in my Arc S and I want your help guyz
I want to install this one: http://forum.xda-developers.com/showthread.php?t=1788701
I have Arc S with stock 4.0.4
I don't have much technical knowledge about Arc.
Please Help me and tell me how can I install ur rom in my phone ?
I have used Flashtool in past and I know about how to use it.
do I need to install this rom using that ?
Please tell me what to do step by step in clear words, I dont understand these short forms.
EDIT: Okay I learned something.. tell me if I am right or wrong.
1. I need to install Rom Manager in my phone
2. I need to Select " Flash ClockworkMod Recovery "
3. then I need to reboot into recovery ( after copying rom's zip file to sd card )
4. Then I need to select Wipe Data/Factory Reset & Wipe Cache Partition.
5. And finally I have to select install rom from sd card and then do install it.
is that all ??? Plsss tell
Thank You

Help yourself, and try reading...
ThilinaC said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(for both locked & unlocked boot loader phones,follow it precisely )
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install rom zip
*.Only for Neo users install Neo patch,Arc users install Arc patch
7.5.Ray users please install Xperia ray build 8 torch fix.zip
8.Install NXT Apps Pack.zip now
9.Reboot now and you are done !
Click to expand...
Click to collapse

XperienceD said:
Help yourself, and try reading...
Click to expand...
Click to collapse
hey actually I have android 2.3.4 in my phone right now, I tried to upgrade it to latest using SEUS but it says ur phone currently have latest version.
I think I need to debrand it, can you please link me to a official stock ics rom ? or just tell me other way to debrand

KashishGupta said:
hey actually I have android 2.3.4 in my phone right now, I tried to upgrade it to latest using SEUS but it says ur phone currently have latest version.
I think I need to debrand it, can you please link me to a official stock ics rom ? or just tell me other way to debrand
Click to expand...
Click to collapse
- First go here and unlock bootloader : http://unlockbootloader.sonymobile.com/
- Then upgrade kernel (kernel and rom must work toghether, so ask the Rom developer (if not already specified) which kernel he recomends for his Rom). My recomendation is to upgrade kernel via fastboot in CMD (command promt), you need android SDK with USB drivers V4 or higher.
- Then install Rom via CWM (put .zip on SD-card), after that install wifi modules asociated with kernel (just like the Rom, put .zip file on sdcard and install them via CWM).
Don`t forget (In CWM) to clear all caches, Dalvik, and most important /system (in mounts and storage) since you are comming from gingerbread.
CWM is automaticaly installed by Kernel (after unlocking bootloader and install a custom Kernel).

Marmalux said:
- First go here and unlock bootloader : http://unlockbootloader.sonymobile.com/
- Then upgrade kernel (kernel and rom must work toghether, so ask the Rom developer (if not already specified) which kernel he recomends for his Rom). My recomendation is to upgrade kernel via fastboot in CMD (command promt), you need android SDK with USB drivers V4 or higher.
- Then install Rom via CWM (put .zip on SD-card), after that install wifi modules asociated with kernel (just like the Rom, put .zip file on sdcard and install them via CWM).
Don`t forget (In CWM) to clear all caches, Dalvik, and most important /system (in mounts and storage) since you are comming from gingerbread.
CWM is automaticaly installed by Kernel (after unlocking bootloader and install a custom Kernel).
Click to expand...
Click to collapse
what is CWM ???
and tell me 1 more thing please, Can I upgrade to this
http://forum.xda-developers.com/showthread.php?t=1680149
using flashtool ?

KashishGupta said:
what is CWM ???
Click to expand...
Click to collapse
Clockwork Mod
http://forum.xda-developers.com/showthread.php?t=1653188

CWM is ClockworkMod Recovery (which is usualy included with kernel)
The link brings you to some stock oficial Roms... you do not need thoese (if you want generic Sony rom just upgrade via PC-Companion)
As a good custom Rom i recomend JJ`s Hybrid Rom 3.2 with Xarc kernel (Sirkay).
As a observation, all custom Roms have minor bugs, things that do not work.... JJ`s (my opinion) is the one that have almost everything working.
About flashtool... i have installed it but used only to change the baseband. So i cannot provide you much help with it, but theoretically you can install the kernel with it and from there you can do everything from ClockworkMod Recovery (CWM).
Now do not forget to get all files needed and copy them to sd-card before any modification, beacuase you might find yourself unable to boot phone (custom kernel with stock gingerbread) and then the only way to access phone card is to remove it and conect to PC with card reader.

Okay now I upgraded to generic ics 4.0.4 using flashtool and it went success, phone booted and working okay.
Now I am trying to root it with flashtool and I am having this error
25/009/2012 11:09:42 - INFO - Pushing M:\Flashtool\.\devices\LT18\busybox\1.19.0\busybox to /data/local/tmp/busybox
25/009/2012 11:09:43 - INFO - Pushing M:\Flashtool\.\custom\root\psneuter.tar to /data/local/tmp
25/009/2012 11:09:43 - INFO - Running part1 of Root Exploit, please wait
25/009/2012 11:09:43 - INFO - Running rootit
25/009/2012 11:09:44 - INFO - Waiting for device
25/010/2012 11:10:44 - INFO - Forced stop waiting.
25/010/2012 11:10:44 - INFO - Running part2 of Root Exploit
25/010/2012 11:10:44 - INFO - Running rootit2
25/010/2012 11:10:44 - ERROR - Cleaning rootit files
Mounting /system R/W
FTError
Click to expand...
Click to collapse
any tutorial about rooting please ??

Yes, at the same link I've given you.
Sent from my Phone.

Okay I rooted my phone, unlocked bootloader, now I think I don't have cwm in my phone. how can i check if I have ? How I can boot my phone in cwm mode ??

KashishGupta said:
Okay I rooted my phone, unlocked bootloader, now I think I don't have cwm in my phone. how can i check if I have ? How I can boot my phone in cwm mode ??
Click to expand...
Click to collapse
By following the instructions.
Sent from my Phone.

I installed cwm auto installed and it says root not available i think my phone is still not rooted

hey my phone rooted successfully, I did all the needful to install that custom rom and it installed. Now my phone is not turning on. it's stuck at SONY logo. pls help me to restore my phone. I made backup using cwm.. How can i boot in cwm mode now ? PLSSSS help it's urgent now

KashishGupta said:
hey my phone rooted successfully, I did all the needful to install that custom rom and it installed. Now my phone is not turning on. it's stuck at SONY logo. pls help me to restore my phone. I made backup using cwm.. How can i boot in cwm mode now ? PLSSSS help it's urgent now
Click to expand...
Click to collapse
I have writen what you need to do !! WHY YOU DID NOT LISTEN TO MY ADVICE ????
Your problem is that your kernel is incompatible with ROM.
Download kernel and flash it with flashtool or fastboot command promt !

[RECOVERY] ClockworkMod Touch Recovery BL v6.0.3.6 English Version [16/09/2013]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ClockworkMod Version: v6.0.3.6
Finally we'd like to introduce a working English version of ClockworkMod Touch Recovery for the Ascend P6... You heard that correct, no more wearing out those precious HW buttons, and more importantly navigation just became much more easier.
Installation Instructions
[INSTALLER VERSION]:
Code:
1. Install provided [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2212747&d=1377443968"]TouchRecoveryInstaller-vX_X.apk[/URL]
2. Launch "[B]Recovery Installer[/B]" from your homescreen.
3. Select "[B]Install Recovery[/B]" and grant [B]ROOT[/B] access on prompt.
4. Finally select "[B]Reboot into Recovery[/B]" to launch CWM.
[Please note when installing zip files you'll need to select "choose zip from external sdcard" within the "Install zip" sub menu]
Installation Instructions
[BOOTLOADER VERSION]:
Code:
1. Ensure you have Recovery Installer (above) installed beforehand.
2. Copy [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2262551&d=1379370201"]TouchRecoveryLoader.zip[/URL] to the root of your external sdcard
3. Load the Recovery Installer and select "Reboot into Recovery" option 2.
4. Once CWM Touch has loaded install TouchRecoveryLoader.zip via external sd card.
Reboot your device, to get into CWM Touch Recovery Hold Volume Down when device LED flashes red.
Credits:
surdu_petru
stickman89
S34Qu4K3
zhenaguo​

FAQ:
Code:
[B]Q. Upon rebooting from CWM Touch Recovery (Bootloader Version) I am unable to get back into recovery there on after (no more red LED indicator). How do I solve?[/B]
A. When selecting "reboot system now" from CWM Touch Recovery (Bootloader Version) ensure you select [B]No[/B] when prompted (No, Yes - Disable recovery flash, Go Back) otherwise required scripts get removed meaning you'd need to repeat the installation.
[B]Q. I am unable to use Backup and Restore using this recovery.[/B]
A. Backup and Restore has been realized and tested on the Bootloader Version of the recovery, please use this version to solve your issue.
[B]Q. Does the Bootloader Version wipe stock Recovery?[/B]
A. No, it is simply side loaded on boot using the scripts created by surdu_petru.
[B]Q. Are there any Risks flashing TouchRecoveryLoader.zip?[/B]
A. No, the method used is a variation of the Touch Recovery Installer but with the added boot time scripts to allow booting to Recovery without Software assistance. No risks are imposed solely on flashing this version alone.
Changelog:
Code:
[B]16/09/2013[/B]
[LIST]
[*]New Bootloader Version created by surdu_petru. Show your support, thank his work [URL="http://forum.xda-developers.com/showthread.php?t=2446125"][B]here[/B][/URL].
[*]Updated surdu_petru's loader to CWM Touch Recovery.
[*]Working Backup and Restore
[/LIST]
[B]25/08/2013[/B]
[LIST]
[*][B]v1.01[/B] - Fixed "Can't mount /sdcard/" error - (Thanks [URL="http://forum.xda-developers.com/member.php?u=4704876"]reyncla[/URL])
[/LIST]
[B]24/08/2013[/B]
[LIST]
[*][B]v1.0[/B] - Initial Release ([B]CWM v6.0.3.6[/B])
[/LIST]
Known Issues:
Code:
[LIST]
[*]Bugs Unknown, Please report on discovery.
[/LIST]

Great job bro! :thumbup:
Rom cooking started!
Sent from my HUAWEI P6-U06 using xda app-developers app

Well done everyone

After it installs, how do you get into it using the hardware keys?

diffstyle said:
After it installs, how do you get into it using the hardware keys?
Click to expand...
Click to collapse
Currently the Recovery Installer acts as a launcher, this is the safest method available to date. Until we investigate a more permanent method that won't impose risks of a brick it will remain this way.
This method does not overwrite stock recovery so it cannot be booted using hardware keys until such time. Rest assured, users will be delighted to here that because of the aforementioned there are no risks imposed using the provided files otherwise.
To reboot into CWM simply use the provided launcher, the recovery need only be installed once, there on after simply select "Reboot into Recovery" to access CWM skipping step 3. Should you wish to install a new firmware/ROM you will however need to Reinstall the provided apk and Recovery by following the provided steps unless it has been baked into the ROM by the 'Chef'.

Stickman89 said:
Currently the Recovery Installer acts as a launcher, this is the safest method available to date. Until we investigate a more permanent method that won't impose risks of a brick it will remain this way. This method does not overwrite stock recovery so it cannot be booted using hardware keys until such time. Rest assured, users will be delighted to here there are no risks imposed using the provided files otherwise.
Click to expand...
Click to collapse
Oh, i understand now. If I may ask, when there is compatible ROM released such as CM or any other one, will we just be launching it through the the available .apk and installing the ROM as we would on any other device via CMW?

diffstyle said:
Oh, i understand now. If I may ask, when there is compatible ROM released such as CM or any other one, will we just be launching it through the the available .apk and installing the ROM as we would on any other device via CMW?
Click to expand...
Click to collapse
We're already hard at work on bringing custom ROMS for the P6, this and zhenaguo's Chinese recovery has very much opened the door for said possibilities. A bit of patience and we should see some life brought into the XDA P6 development forums.

Stickman89 said:
We're already hard at work on bringing custom ROMS for the P6, this and zhenaguo's recovery has very much opened the door for said possibilities. A bit of patience and we should see some life brought into the XDA P6 development forums.
Click to expand...
Click to collapse
Thank you for this information! I shall be keeping my device then.

Congratulations!!!!!!!!
This CWM run on my D1 Quad XL!!!!!!
Thanks for all who create that!!!!!!:good:

Have got firmware B111 with root, but can't get the phone to boot into recovery. Tried adjusting the power management in order to enable recovery at start up, but no go - the app is not listed.
Sent from my HUAWEI P6-U06 using Tapatalk 2

You installed the recovery using the apk button?
The method to use this recovery is (in theory) universal, for ANY phone, just need to be rooted
Sent from my HUAWEI P6-U06 using xda app-developers app

Well done! give yourself a pat on the back!
Stickman89 said:
ClockworkMod Version: v6.0.3.6
Finally we'd like to introduce a working English version of ClockworkMod Touch Recovery for the Ascend P6... You heard that correct, no more wearing out those precious HW buttons, and more importantly navigation just became much more easier.
Installation Instructions:
Code:
1. Install provided [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2209367&stc=1&d=1377306914"]TouchRecoveryInstaller-vX_X.apk[/URL]
2. Launch "[B]Recovery Installer[/B]" from your homescreen.
3. Select "[B]Install Recovery[/B]" and grant [B]ROOT[/B] access on prompt.
4. Finally select "[B]Reboot into Recovery[/B]" to launch CWM.
[Please note when installing zip files you'll need to select "choose zip from external sdcard" within the "Install zip" sub menu]
Changelog:
Code:
[B]24/08/2013[/B]
[LIST]
[*][B]v1.0[/B] - Initial Release ([B]CWM v6.0.3.6[/B])
[/LIST]
Credits:
stickman89
S34Qu4K3
zhenaguo​
Click to expand...
Click to collapse

It seems that it is not fully functional. Backup and wipe rom does not work either. Be revised? Or only work for flashing cooked roms?

JoySu said:
It seems that it is not fully functional. Backup and wipe rom does not work either. Be revised? Or only work for flashing cooked roms?
Click to expand...
Click to collapse
Works for flashing roms via external sdcard, I'm working on modifying a large quantity of the source to solve sdcard mount errors today.

S34Qu4K3 said:
You installed the recovery using the apk button?
The method to use this recovery is (in theory) universal, for ANY phone, just need to be rooted
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Yes, I did.
Sent from my HUAWEI P6-U06 using Tapatalk 2

It's sounds good...
Can i install *.zips like xloud or xperia music player?
Sent from my HUAWEI P6-U06 using xda app-developers app

pvfos said:
Yes, I did.
Sent from my HUAWEI P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
Unistall app,reinstall,install recovery and launch recovery
sisqoboy said:
It's sounds good...
Can i install *.zips like xloud or xperia music player?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Of course
Sent from my HUAWEI P6-U06 using xda app-developers app

S34Qu4K3 said:
Unistall app,reinstall,install recovery and launch recovery
Of course
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
S34Qu4K3 perform the following whilst in CWM:
Code:
adb shell
cd /sdcard/
ls
Looks like our internal sdcard is mounted afterall. Boggled to as why CWM is unable to access it. I compiled TWRP last night successfully since it's been reported that some boot loaders have issues with CWM and internal sdcard. Yet to try it since it requires some modification to the existing scripts I.e. symlinking and copying of additional binaries.
I'll get ahold of you tonight for some more testing.

Great! And what about that CWM flags?
Sent from my HUAWEI P6-U06 using xda app-developers app

[Q] NEED HELP! ROOT GT-I9192 S4 Mini DuoS 4.2.2 XXUBNB1

Hey guys,
i'm new here and i hope, that you can help me with my problem!
I've tried to root my Samsung I9192 S4 Mini DuoS, which is 4.2.2 and XXUBNB1.
I flashed the Custom Recovery (recovery-clockwork-6.0.4.5-serranoltexx.tar.md5) via Odin and after that, I've installed the S4Mini_RootKit_v2.zip via CWM Recovery.
SuperSU is installed, but if I check my root permisson, the message is, that i havent any root rights, although I installed the S4Mini_RootKit_v2.zip.
I can't understand it! I know that KNOX is the problem, and i dont know how to remove it. I've tried a lot of methods, like remove the KNOX files via ES Explorer, but it doesn't work! :crying:
My question: How can I root my Samsung I9192 S4 Mini DuoS with Android 4.2.2 and Built XXUBNB1?
Can I flash the Custom Kernel called "Amestris Kernel V2 for Samsung Galaxy S4 mini Duos (GT-I9192)" which is based of
MK4 on my I9192 with NB1?
THANK YOU!
AND SORRY FOR MY BAD ENGLISH

Follow this guide http://forum.xda-developers.com/showthread.php?t=2494435
Powered by CM11 - M6 snapshot

R_a_z_v_a_n said:
Follow this guide http://forum.xda-developers.com/showthread.php?t=2494435
Powered by CM11 - M6 snapshot
Click to expand...
Click to collapse
Thank You!
I follow the steps but i havent got any root permisson, although SuperSU is installed.
What can I do? Can i install the Amestris Kernel V2 for GT-I9192 via Odin (based on MK4) on my I9192
with NB1 ? KNOX is the problem, I Can't unistall it. But this Custom Kernel can deactivate it...

007lou said:
Hey guys,
i'm new here and i hope, that you can help me with my problem!
I've tried to root my Samsung I9192 S4 Mini DuoS, which is 4.2.2 and XXUBNB1.
I flashed the Custom Recovery (recovery-clockwork-6.0.4.5-serranoltexx.tar.md5) via Odin and after that, I've installed the S4Mini_RootKit_v2.zip via CWM Recovery.
SuperSU is installed, but if I check my root permisson, the message is, that i havent any root rights, although I installed the S4Mini_RootKit_v2.zip.
Click to expand...
Click to collapse
Neither I could achieve root on I9192UBUAMH1 doing the arco method. Also Saferoot failed.
I then flashed PhilZ Touch CWM Advanced Edition, reflashed stock ROM, boot into Recovery and select "PhilZ Sttings" --> "Re-root System (SuperSU)"
That did the job for me.

aguaz said:
Neither I could achieve root on I9192UBUAMH1 doing the arco method. Also Saferoot failed.
I then flashed PhilZ Touch CWM Advanced Edition, reflashed stock ROM, boot into Recovery and select "PhilZ Sttings" --> "Re-root System (SuperSU)"
That did the job for me.
Click to expand...
Click to collapse
did you re-flashed your Stockrom in the Custom Recovery or via Odin?
Can I flash the PhilZ Touch CWM Recovery over my Clockwork-recovery and do "Re-Root system", without reflash stock rom????

007lou said:
did you re-flashed your Stockrom in the Custom Recovery or via Odin?
Click to expand...
Click to collapse
I flashed system.img.ext4 (extracted from Stock firmware) with heimdall after I had wiped the ROM with PhilZ Touch CWM.
I think you should be able to achieve the same with Odin instead of heimdall.
007lou said:
Can I flash the PhilZ Touch CWM Recovery over my Clockwork-recovery and do "Re-Root system", without reflash stock rom????
Click to expand...
Click to collapse
Yes, it might work w/o re-flashing system. In my case I just wanted to make sure there were no leftovers from my previous attempts with arco/saferoot.
Here is a quick summary of all attempts I did:
- arco recovery --> works
- arco root --> fails
- saferoot --> fails
- PhilZ touch --> works
- clean ROM with PhilZ touch --> works
- re-flash Stock ROM (only system.img.ext4) --> works
- re-root with PhilZ touch --> works

aguaz said:
I flashed system.img.ext4 (extracted from Stock firmware) with heimdall after I had wiped the ROM with PhilZ Touch CWM.
I think you should be able to achieve the same with Odin instead of heimdall.
Yes, it might work w/o re-flashing system. In my case I just wanted to make sure there were no leftovers from my previous attempts with arco/saferoot.
Here is a quick summary of all attempts I did:
- arco recovery --> works
- arco root --> fails
- saferoot --> fails
- PhilZ touch --> works
- clean ROM with PhilZ touch --> works
- re-flash Stock ROM (only system.img.ext4) --> works
- re-root with PhilZ touch --> works
Click to expand...
Click to collapse
THANK YOU SO MUCH!
I will try it out today, but I have still a little question:
Does the PhilZ touch Recovery root my phone without any Zip file, i mean automaticly???? And does it works (with KNOX and with 4.2.2)?

Use saferoot,
But I the Knox notifications was preventing root access just force close all knox related apps on applications manager then open supersu, worked for me,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you have cwm recovery you have all you need
Solution 1) mount system and use aroma file manager to delete all the Knox related apps then reboot and update supersu,
Solution 2) You could also flash a rom cleaner script to delete all bloatware including Knox stuff reboot and update super su
Sent from my GT-I9192 using Tapatalk

007lou said:
I will try it out today, but I have still a little question:
Does the PhilZ touch Recovery root my phone without any Zip file
Click to expand...
Click to collapse
Yes, the re-root option of Philz CWM did that in my case. At least so I was able to run 'su' when in adb shell. You might have to install SuperSU additionally for running Android root apps.
I'm not on Knox, so I'm not of much help there. As far as I understood though, it doesn't prevent you from any rooting but will set a flag when you flash any custom firmware. By applying the arco root I guess you've triggered that flag already though. As fburgos said the Saferoot way should not trigger that flag, but it failed to run on my device.
007lou said:
THANK YOU SO MUCH!
Click to expand...
Click to collapse
Don't say that, just hit the "Thanks" button

aguaz said:
Yes, the re-root option of Philz CWM did that in my case. At least so I was able to run 'su' when in adb shell. You might have to install SuperSU additionally for running Android root apps.
I'm not on Knox, so I'm not of much help there. As far as I understood though, it doesn't prevent you from any rooting but will set a flag when you flash any custom firmware. By applying the arco root I guess you've triggered that flag already though. As fburgos said the Saferoot way should not trigger that flag, but it failed to run on my device.
Don't say that, just hit the "Thanks" button
Click to expand...
Click to collapse
I have a new problem, my Phone doesn' have Connection of mobile Data, so i can't use Internet outside (wifi works). I have checked the APN but its all right. The phone accepts the sim card, but i cant use the mobile data
What can I do?

Dear All,
I tired to root my devise Samsung GT-I9192 build I9192XXUBNB1 but I couldn't I tried Odin and Kingo from PC. I want only to root my phone not to install any custom rom

[Recovery] PhilZTouch 6 based on CWM v6.0.5.1 for A210

PhilZTouch 6 based on CWM v6.0.5.1 for A210
All the credit for this goes to @Phil3759 for his PhilZ Touch Recovery -->http://forum.xda-developers.com/showthread.php?t=2201860
@yuweng for Compiling it for mt65xx devices and instructions for porting it:http://forum.xda-developers.com/showthread.php?t=2748169
So go to their respective threads and Thank them , because this won't be possible without them!!!!!!!!!!!!
I've tested this recovery on my phone , it mounts both the sdcards (internal and external)!!
the backup and restore options are also tested and working perfectly!!!!!!​And If You Like MY Work PLEASE Press Thanks!​
XDA:DevDB Information
PhilzTouch Recovery 6, Tool/Utility for the Micromax Canvas 4 A210
Contributors
Prometheus
Version Information
Status: Testing
Created 2015-03-18
Last Updated 2015-03-18

Reserved
Downloads:
http://d-h.st/7wJn
How To Flash/Instructions:
By Flashify;
1.Download Flashify from Playstore.
2.Open it and grant it root access.
3.Select recovery option.
4.Select Choose a file and navigate to the location where you saved the recovery image and select it.
5.Confirm the flashing and it will be flashed to your phone.
6.When done select reboot to recovery.Done.
By MobileUncle Tools:
1.Download Mobileuncle Tools from Playstore.
2.Rename the recovery file to 'recovery.img' and place it in root of your SDcard.
3.Open MobileUncle Tools and grant root access.
4.Select recovery update from the menu.
5.Select recovery.img and confirm the flashing.
6.Done.
Enjoy Folks.

Reserved
This Recovery flashes KitKat Roms Perfectly.
But Before Flashing There a few Steps/Cautions To be taken:
1.After downloading the rom replace the update binary in
\META-INF\com\google\android with the one I am providing.
2.Open updater script in exact same location as above and search for line that starts with 'assert', and delete those lines from updater script.
Doing the above steps is necessary or the recovery wont flash KitKat Roms.​
Above Procedure is only for KK roms. JB roms do not reqiure this or any other procedure other than flashing
After Doing Above Procedure I myself flashed and checked CM,PAC & AOSB. They flashed perfectly and worked flawlessly.

Prometheus said:
This Recovery flashes KitKat Roms Perfectly.
But Before Flashing There a few Steps/Cautions To be taken:
1.After downloading the rom replace the update binary in
\META-INF\com\google\android with the one I am providing.
2.Open updater script in exact same location as above and search for line that starts with 'assert', and delete those lines from updater script.
Doing the above steps is necessary or the recovery wont flash KitKat Roms.​
Above Procedure is only for KK roms. JB roms do not reqiure this or any other procedure other than flashing
After Doing Above Procedure I myself flashed and checked CM,PAC & AOSB. They flashed perfectly and worked flawlessly.
Click to expand...
Click to collapse
Can you suggest stable functional KitKat ROM for Canvas 4

satsmagic said:
Can you suggest stable functional KitKat ROM for Canvas 4
Click to expand...
Click to collapse
On personal experience, I would say cm v0.17 is the most stable kitkat rom for canvas 4.

Can be flashed via SP Tools too!! :good:
Loving the recovery lock feature!!
Awesome port bro!! :good: :good:

Prometheus said:
On personal experience, I would say cm v0.17 is the most stable kitkat rom for canvas 4.
Click to expand...
Click to collapse
Thanks, i checked tht ROM has subsequent verisons CM11 ver 0.9 and CM11 NextGen ver 0.1
Shouldnt the subsequent versions be better ???
Below is the link
http://forum.xda-developers.com/showthread.php?t=2676086

satsmagic said:
Thanks, i checked tht ROM has subsequent verisons CM11 ver 0.9 and CM11 NextGen ver 0.1
Shouldnt the subsequent versions be better ???
Below is the link
http://forum.xda-developers.com/showthread.php?t=2676086
Click to expand...
Click to collapse
You can see the changelog.. 0.19 does not hv wifi hotspot..n nxtgen has some ram management issues..both of which are not the in cyanogen 0.17

Its working and probably bug less... Thanks nice work:thumbup::thumbup:
Sent from my A210 using XDA Free mobile app

Sparkenstein said:
Its working and probably bug less... Thanks nice work:thumbup::thumbup:
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
I am pretty sure it's bugless.. I've been using it for four to give days now.. Tried everything..
Anyhow, if u find any bugs let me know..I'll try to solve them

Nice work.. You can even restore nandroid backup taken by CWM recovery too.
Can you give details what advance and new functions do? Am pretty newbie to some functions!
Sent from my a210 using XDA Free mobile app

@Prometheus there is no "FIX PERMISSION" option in this recovery. or is it there by some other name
and also i am unable to go back to CWM recovery, by flashing the same with Mobile uncle MTK tools

satsmagic said:
@Prometheus there is no "FIX PERMISSION" option in this recovery. or is it there by some other name
and also i am unable to go back to CWM recovery, by flashing the same with Mobile uncle MTK tools
Click to expand...
Click to collapse
Try Rashr or flashify

Prometheus said:
Try Rashr or flashify
Click to expand...
Click to collapse
Can you please elaborate the installation of the updater script I mean the path file . [emoji3]
and the touch isnt working help pls

Hi,
I own a Canvas 4 (A210).
I downloaded Philz recovery from the link http://d-h.st/dw3.
But instead of downloading from the DOWNLOAD NOW BUTTON, i did it from the DOWNLOAD BUTTON.
The file size was only 206 KB. I didn't observe this and this was my mistake.
i flashed the same through Mobile Uncle Tool and after flashing the screen started flickering, and got struck in the logo screen.
i rebooted the same, but no change.
I flashed custom Rom through SP tools and booted, but the touch screen was flipped and the touch Erratic. and was unable to go ahead the setup screen.
I tried flashing the Recovery from the link you have posted and was successful, but the main problem remained.
I tried flashing different ROM's , but the touch screen problem remained.
The handset was sent to service center and they said that the touch screen needs to be replaced and would cost 3000 + 1 month warranty.
I am now on stock ROM with setup screen.
I read at the link posted below that there is a manual mode available to set the resolution.
http://forum.xda-developers.com/showthread.php?t=2748169.
Is is possible for me to do it ( i am no software engineer)
Or my only option is get the screen replaced.
Please help me out
superna
thanks

Can u please provide me link for twrp

patil4541 said:
Can u please provide me link for twrp
Click to expand...
Click to collapse
TWRP is not yet developed for our device

[TOOL][X72X] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the LeEco Le Pro 3's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
I didn't try it yet
But Thank you for your work,

mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
It is compatible for the lepro3? I used it before for oneplus2.

meuhmeuh51 said:
It is compatible for the lepro3? I used it before for oneplus2.
Click to expand...
Click to collapse
Yes, it's completely compatible, i have tested it on my leeco le pro 3

mauronofrio said:
Yes, it's completely compatible, i have tested it on my leeco le pro 3
Click to expand...
Click to collapse
ok I will try

Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently
Sent from my SM-P600 using XDA-Developers Legacy app

mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app

toanau said:
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app
Click to expand...
Click to collapse
no

Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.

kaivorth said:
Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.
Click to expand...
Click to collapse
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk

coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away

kaivorth said:
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away
Click to expand...
Click to collapse
Had the same issue and same fix for my attempt into unlocking bootloader and installing custom recovery and rom.
Did you also flash the 5.8.0.19 aboot file? I'm wondering if flashing a newer one is a good idea...
Sent from my LEX727 using Tapatalk

Very good tool thank you very much Mauro

Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?

Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
The twrp 3.1.0 is better no matter the dev

Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode

mauronofrio said:
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode
Click to expand...
Click to collapse
Thank you for all your effort for our Le Pro 3 :good:

Does this unlock bootloader with the current us version 21s?

I try using this Tool ALL in One on the Le Pro 3 but unable to unlock the bootloader as it displayed
"FAILED <remote: oem unlock is not allowed).
I already checked "ON under the OEM UNLOCKING" and "USB debugging" is "ON" also under the Developer Option before turning off the phone and boot it (volume down + Power) into Fastboot Mode.
Please help. Any advise is appreciated.

coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
fastboot should be vol down