{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ClockworkMod Version: v6.0.3.6
Finally we'd like to introduce a working English version of ClockworkMod Touch Recovery for the Ascend P6... You heard that correct, no more wearing out those precious HW buttons, and more importantly navigation just became much more easier.
Installation Instructions
[INSTALLER VERSION]:
Code:
1. Install provided [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2212747&d=1377443968"]TouchRecoveryInstaller-vX_X.apk[/URL]
2. Launch "[B]Recovery Installer[/B]" from your homescreen.
3. Select "[B]Install Recovery[/B]" and grant [B]ROOT[/B] access on prompt.
4. Finally select "[B]Reboot into Recovery[/B]" to launch CWM.
[Please note when installing zip files you'll need to select "choose zip from external sdcard" within the "Install zip" sub menu]
Installation Instructions
[BOOTLOADER VERSION]:
Code:
1. Ensure you have Recovery Installer (above) installed beforehand.
2. Copy [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2262551&d=1379370201"]TouchRecoveryLoader.zip[/URL] to the root of your external sdcard
3. Load the Recovery Installer and select "Reboot into Recovery" option 2.
4. Once CWM Touch has loaded install TouchRecoveryLoader.zip via external sd card.
Reboot your device, to get into CWM Touch Recovery Hold Volume Down when device LED flashes red.
Credits:
surdu_petru
stickman89
S34Qu4K3
zhenaguo
FAQ:
Code:
[B]Q. Upon rebooting from CWM Touch Recovery (Bootloader Version) I am unable to get back into recovery there on after (no more red LED indicator). How do I solve?[/B]
A. When selecting "reboot system now" from CWM Touch Recovery (Bootloader Version) ensure you select [B]No[/B] when prompted (No, Yes - Disable recovery flash, Go Back) otherwise required scripts get removed meaning you'd need to repeat the installation.
[B]Q. I am unable to use Backup and Restore using this recovery.[/B]
A. Backup and Restore has been realized and tested on the Bootloader Version of the recovery, please use this version to solve your issue.
[B]Q. Does the Bootloader Version wipe stock Recovery?[/B]
A. No, it is simply side loaded on boot using the scripts created by surdu_petru.
[B]Q. Are there any Risks flashing TouchRecoveryLoader.zip?[/B]
A. No, the method used is a variation of the Touch Recovery Installer but with the added boot time scripts to allow booting to Recovery without Software assistance. No risks are imposed solely on flashing this version alone.
Changelog:
Code:
[B]16/09/2013[/B]
[LIST]
[*]New Bootloader Version created by surdu_petru. Show your support, thank his work [URL="http://forum.xda-developers.com/showthread.php?t=2446125"][B]here[/B][/URL].
[*]Updated surdu_petru's loader to CWM Touch Recovery.
[*]Working Backup and Restore
[/LIST]
[B]25/08/2013[/B]
[LIST]
[*][B]v1.01[/B] - Fixed "Can't mount /sdcard/" error - (Thanks [URL="http://forum.xda-developers.com/member.php?u=4704876"]reyncla[/URL])
[/LIST]
[B]24/08/2013[/B]
[LIST]
[*][B]v1.0[/B] - Initial Release ([B]CWM v6.0.3.6[/B])
[/LIST]
Known Issues:
Code:
[LIST]
[*]Bugs Unknown, Please report on discovery.
[/LIST]
Great job bro! :thumbup:
Rom cooking started!
Sent from my HUAWEI P6-U06 using xda app-developers app
Well done everyone
After it installs, how do you get into it using the hardware keys?
diffstyle said:
After it installs, how do you get into it using the hardware keys?
Click to expand...
Click to collapse
Currently the Recovery Installer acts as a launcher, this is the safest method available to date. Until we investigate a more permanent method that won't impose risks of a brick it will remain this way.
This method does not overwrite stock recovery so it cannot be booted using hardware keys until such time. Rest assured, users will be delighted to here that because of the aforementioned there are no risks imposed using the provided files otherwise.
To reboot into CWM simply use the provided launcher, the recovery need only be installed once, there on after simply select "Reboot into Recovery" to access CWM skipping step 3. Should you wish to install a new firmware/ROM you will however need to Reinstall the provided apk and Recovery by following the provided steps unless it has been baked into the ROM by the 'Chef'.
Stickman89 said:
Currently the Recovery Installer acts as a launcher, this is the safest method available to date. Until we investigate a more permanent method that won't impose risks of a brick it will remain this way. This method does not overwrite stock recovery so it cannot be booted using hardware keys until such time. Rest assured, users will be delighted to here there are no risks imposed using the provided files otherwise.
Click to expand...
Click to collapse
Oh, i understand now. If I may ask, when there is compatible ROM released such as CM or any other one, will we just be launching it through the the available .apk and installing the ROM as we would on any other device via CMW?
diffstyle said:
Oh, i understand now. If I may ask, when there is compatible ROM released such as CM or any other one, will we just be launching it through the the available .apk and installing the ROM as we would on any other device via CMW?
Click to expand...
Click to collapse
We're already hard at work on bringing custom ROMS for the P6, this and zhenaguo's Chinese recovery has very much opened the door for said possibilities. A bit of patience and we should see some life brought into the XDA P6 development forums.
Stickman89 said:
We're already hard at work on bringing custom ROMS for the P6, this and zhenaguo's recovery has very much opened the door for said possibilities. A bit of patience and we should see some life brought into the XDA P6 development forums.
Click to expand...
Click to collapse
Thank you for this information! I shall be keeping my device then.
Congratulations!!!!!!!!
This CWM run on my D1 Quad XL!!!!!!
Thanks for all who create that!!!!!!:good:
Have got firmware B111 with root, but can't get the phone to boot into recovery. Tried adjusting the power management in order to enable recovery at start up, but no go - the app is not listed.
Sent from my HUAWEI P6-U06 using Tapatalk 2
You installed the recovery using the apk button?
The method to use this recovery is (in theory) universal, for ANY phone, just need to be rooted
Sent from my HUAWEI P6-U06 using xda app-developers app
Well done! give yourself a pat on the back!
Stickman89 said:
ClockworkMod Version: v6.0.3.6
Finally we'd like to introduce a working English version of ClockworkMod Touch Recovery for the Ascend P6... You heard that correct, no more wearing out those precious HW buttons, and more importantly navigation just became much more easier.
Installation Instructions:
Code:
1. Install provided [URL="http://forum.xda-developers.com/attachment.php?attachmentid=2209367&stc=1&d=1377306914"]TouchRecoveryInstaller-vX_X.apk[/URL]
2. Launch "[B]Recovery Installer[/B]" from your homescreen.
3. Select "[B]Install Recovery[/B]" and grant [B]ROOT[/B] access on prompt.
4. Finally select "[B]Reboot into Recovery[/B]" to launch CWM.
[Please note when installing zip files you'll need to select "choose zip from external sdcard" within the "Install zip" sub menu]
Changelog:
Code:
[B]24/08/2013[/B]
[LIST]
[*][B]v1.0[/B] - Initial Release ([B]CWM v6.0.3.6[/B])
[/LIST]
Credits:
stickman89
S34Qu4K3
zhenaguo
Click to expand...
Click to collapse
It seems that it is not fully functional. Backup and wipe rom does not work either. Be revised? Or only work for flashing cooked roms?
JoySu said:
It seems that it is not fully functional. Backup and wipe rom does not work either. Be revised? Or only work for flashing cooked roms?
Click to expand...
Click to collapse
Works for flashing roms via external sdcard, I'm working on modifying a large quantity of the source to solve sdcard mount errors today.
S34Qu4K3 said:
You installed the recovery using the apk button?
The method to use this recovery is (in theory) universal, for ANY phone, just need to be rooted
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Yes, I did.
Sent from my HUAWEI P6-U06 using Tapatalk 2
It's sounds good...
Can i install *.zips like xloud or xperia music player?
Sent from my HUAWEI P6-U06 using xda app-developers app
pvfos said:
Yes, I did.
Sent from my HUAWEI P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
Unistall app,reinstall,install recovery and launch recovery
sisqoboy said:
It's sounds good...
Can i install *.zips like xloud or xperia music player?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Of course
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Unistall app,reinstall,install recovery and launch recovery
Of course
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
S34Qu4K3 perform the following whilst in CWM:
Code:
adb shell
cd /sdcard/
ls
Looks like our internal sdcard is mounted afterall. Boggled to as why CWM is unable to access it. I compiled TWRP last night successfully since it's been reported that some boot loaders have issues with CWM and internal sdcard. Yet to try it since it requires some modification to the existing scripts I.e. symlinking and copying of additional binaries.
I'll get ahold of you tonight for some more testing.
Great! And what about that CWM flags?
Sent from my HUAWEI P6-U06 using xda app-developers app
Related
6/02/13This update has been provided by Ichigo™
TWRP has just been updated to 2.4.4.0, here is a new smirkit v.2.8 that contains this latest TWRP release.
Click to expand...
Click to collapse
everyone who uses this should thank Ichigo when you see his post's. he has taken on the task to keep this updated for your use as me nor webdroidmt no longer have this device. Thanks Ichigo!
download the new smirkit app here
https://dl.dropboxusercontent.com/s/q0wa5y0mgrgr433/Smirkit.apk
install the app, click install! no need to reboot to recovery and flash like before.
use smirkit as you normally would. this would be a new installer of smirkit
some info to take note of.
The advantages of an app over a flashable zip are:
1)You can install smirkit within the app instead of having to reboot into recovery
2)It will install smirkit on alt roms
3)It can automatically remove smirkit if the user wants instead having to manually do it.
Two things the users should know:
1) They may get a warning when installing something via smirkit. I'm not sure why it shows, but they can just ignore the warning. Everything still works fine.
2)They may find a smirkit folder on their sdcard. They shouldn't delete this folder. It's only 30bytes.
______________________________
smirkit now works on all roms! stock rooted users, make sure you install busybox from the market and run the app to install busybox first.
this update includes sblood86's new cannibal open touch recovery. read below for new install instructions!
release thread here
thread cleaned. I wanted to lighten the load and provide a way of flashing up-to-date files so nobody gets left behind. as cwm gets updated, I will update this to include it. in this update is the new twrp 2.1.1. I never got a response from him officially, but u guys need a way so I'm leaving it up until he says otherwise. I do beg u to visit his site anyway if u use this so he gets his views/clicks. if you can spare some change donate to them.
http://teamw.in/project/twrp2
I wanna thank kinfauns for rewriting the way the scripts now run, to verify the md5 before flashing the Bootloader or Recovery. this guy does a lot behind the scenes, so thank this man often! without his help that twrp update wouldn't have came so soon. if u have time, I highly suggest reading his guide to familiarize yourself with the kindle fire. http://forum.xda-developers.com/showthread.php?p=23747567
credits to:
hashcode - updating fff to v1.4a with a boot mode selection.. awesome!
dees_troy - updating twrp and squashing an old issue that I'm so glad is fixed!
sblood86 - providing support on our kindles and helping me very regularly lol.
jrummy - developers of root browser
doomlord and team utterchaos - for providing us with support and updates to our cwmtouch!
pokey9000 - for creating the bootloader on all of our devices!
Kinfaun - for assisting me with writing the scripts and method.
teamwin - for starting us off with twrp
webdroidmt - staying involved and updating smirkit since i no longer have this device!
Ichigo - taking on the task of updating smirkit since me and webdroidmt no longer have this device! (thank this man when you can)
you NEED root, busybox, and a custom recovery to do this. (any recovery u can flash a zip with)
______________________install instructions___________________________
[*]firstly, grab terminal emulator and busybox if you don't already have it off the market.
[*]now, download goomanager from the market
[*]in goomanager, tap browse all files, then devs/smirkis/otter/smirkit and download smirkit-installer
-needs to be updated. use dropbox link for now
OR
[*]download smirkit-installer directly here (thank Ichigot for this update):
http://db.tt/8ZLuCqmE
[*]flash smirkit-installer.zip in recovery using goomanager, or manually
______________________how to use smirkit____________________________
[*]boot back into the OS and open terminal emulator.
[*]first, type SU then hit enter
[*]now, type smirkit then hit enter
it should end up like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then this:
from here, make a selection from the menu.
enjoy!
[*]WARNING: IF YOU FLASH A NEW ROM IT WILL REMOVE THE FILES NECESSARY FOR THIS TO WORK. JUST REFLASH THIS IN RECOVERY AGAIN OR ASK YOUR ROM DEVELOPER TO SUPPORT THE NEW SMIRKIT IN THEIR ROM!
[*]
nice stuff. btw can we install recovery without installing firefirefire bootloader first?.
dieandromeda said:
nice stuff. btw can we install recovery without installing firefirefire bootloader first?.
Click to expand...
Click to collapse
of course, but u will need firefirefire to get into recovery. but the order you do it in doesn't really matter
Sent from my HTC Glacier using xda premium
smirkis said:
of course, but u will need firefirefire to get into recovery. but the order you do it in doesn't really matter
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
my kindle already have firefirefire and twrp, planning to test clockwork with stock bootloader expecting it will work without using fff. i guess i still need fff to boot into clockwork recovery, am i right?.
dieandromeda said:
my kindle already have firefirefire and twrp, planning to test clockwork with stock bootloader expecting it will work without using fff. i guess i still need fff to boot into clockwork recovery, am i right?.
Click to expand...
Click to collapse
Or you can use a terminal emulator and type:
Su
Oem idme bootmode 5000
Sent from my myTouch_4G_Slide using XDA App
jmcoffey said:
Or you can use a terminal emulator and type:
Su
Oem idme bootmode 5000
Sent from my myTouch_4G_Slide using XDA App
Click to expand...
Click to collapse
only do that, if you have clockworkmod
Sent from my HTC Glacier using xda premium
i heard we can boot into clockwork recovery via rom manager, what i want is the booting using power button in case something happened that i can't boot normally
dieandromeda said:
i heard we can boot into clockwork recovery via rom manager, what i want is the booting using power button in case something happened that i can't boot normally
Click to expand...
Click to collapse
u can use rom manager to do backups n restores n installs, but reboot to recovery option does not work in rom manager.
so install cwm, and firefirefire bootloader
Sent from my HTC Glacier using xda premium
smirkis said:
u can use rom manager to do backups n restores n installs, but reboot to recovery option does not work in rom manager.
so install cwm, and firefirefire bootloader
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
ic. thanks..
If using CM7 with TWRP installed, can this be used to just simply swich from TWRP to CWM. I'm sure there are many looking for this?
chairshot215 said:
If using CM7 with TWRP installed, can this be used to just simply swich from TWRP to CWM. I'm sure there are many looking for this?
Click to expand...
Click to collapse
yes sir! that was one of my motives! you can do all of this on your kindle fire, from any os.
Sent from my HTC Glacier using xda premium
is it possible to add a script for installing a kernel?.
After installing cwm can't boot into twrp where my previous backups are done. Can you have both methods or have to reinstall twrp with gscript?
fredspierson said:
After installing cwm can't boot into twrp where my previous backups are done. Can you have both methods or have to reinstall twrp with gscript?
Click to expand...
Click to collapse
You have to reinstall.
Sent from my myTouch_4G_Slide using XDA App
dieandromeda said:
is it possible to add a script for installing a kernel?.
Click to expand...
Click to collapse
you can, but some kernels use different wifi drivers too, so its easier right now to flash kernels thru recovery. which kernel are you referring to?
Sent from my Amazon Kindle Fire using xda premium
smirkis said:
you can, but some kernels use different wifi drivers too, so its easier right now to flash kernels thru recovery. which kernel are you referring to?
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
i'm referring to stock kernel and intersectRaven... i'm not good in adb, thats why i always prefer script just like your gscript or flashing through recovery... can u point me to the right direction how to flash kernel using recovery... i guess i need to compile in zip file with script/signed/etc...
For quite a while IntersectRaven's kernels have been properly zipped for easy installation via TWRP or CWM. Just copy the .zip to your Kindle,and install via your recovery. His zip will automatically update the wifi driver, as well.
However, as a word of warning... PLEASE do a recovery-based backup of your system prior to installing any new kernel. If you don't like the new kernel's performance, you can reinstall the original kernel by restoring the /boot partition from the backup you made before installing the new kernel. Also since IntersectRaven's .zip will replace your original wifi driver, make a BACKUP of your original wifi driver in case you ever want to go back to your original kernel. To do this, use something like root explorer to copy /etc/wifi/tiwlan_drv.ko to /etc/wifi/tiwlan_drv.ko.orig. Then you can copy it back if you reinstall the original kernel.
By the way, IntersectRaven's kernel will only overclock newer CPUs that are internallly flagged as factory authorized to run at 1.2 Ghz. You will still see a performance improvement with his kernel compared to stock even at 1 Ghz. Neall
^thanks for the clarification. btw can we use this apps to install supercharger?. there are .sh files included in supercharger pack. is there any precaution that i need to worry?
this is awesome! thank you so much
Sorry, little late on the follow up question but just to be sure, if I have TWRP installed and looking to make the change to CWM I basically then would just install the APK, run the App and then just select the option to install CWM and call it a day????????
If you are reading this most probably you are new to xda, Welcome , and facing storm of questions what is root, bootloader etc and how to do that. But Before answering to your question Introduce yourself with forum RULES, Now Guide and explanation of every term is given below for FAQ's please check end of the post.
Rooting
Rooting means getting full control on your phone.
Why ?
1. Rooting allows to move app from internal memory to SD card.
2. You can use your phone as wifi spot without paying.
3. You can install custom ROM'S
OhhGreat But How!!!
1.Flash Tool by - Bin4ry & Androxyde
2. Eroot by eroot
I recommend eroot (simple and quick)
Note - click on name (tool) to download
Note for both method or anything - Make sue Correct drivers are installed on PC (Use your mobile with PC companion tool to do so) & USB-Debugging is on (settings --> Developers option --> Check USB-Debugging )
Eroot
1. Download and run it
2. Connect your Device to the Computer
3. just click the “一键root ” then wait a moment
4. when it says “恭喜您，获取root 权限成功”，Done
Flash Tool
1. Download and Install
2. Install drivers from " C:\Flashtool\drivers "
3. Connect your device
4. Start flashtool, press root button, select superuser and press OK.
5. When prompted click the restore button on your phone, be sure you select the 'RootME' recovery!
6. Device will reboot almost 3 times.
7. After flast tool log says "Finished", your phone is now rooted .
Unrooting
1. Open eroot
2. Click on button shown in pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery
Custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery
Recoverx by LEDelete
"You just have to launch RecoverX, enter “install” and select your device, the recovery you want to install and RecoverX does the rest, it’s that simple." - LEDelete
Instruction
1. Download tool (Click on name to do so) & unzip
2. Run RecoverX
3. Select your brand phone model & recovery type
4. Click Next then Next (After it complete downloading)
5. Read instruction and then next
6. Done
Alternative Method (Fastboot Kernel) - for unlocked bootloader (unlock your bootloader...scroll down for instructions)
1. Download Kernel for you android version as .elf (eg. advanced ICS kernel for ICS (4.0.4))
2. Open flashtool
3. Switch off your phone and hold volume up button and plug usb cable along with holding
4. Click on flash icon in flashtool
5. Select fastboot mode
6. Select kernel to flash
7. Flash
Bootloader unlocking
Bootloader unlocking allows you to install different custom ROM'S and Kernels.
Disadvantage - No bravia Engine
- No music info
Dont worry after relocking bravia engine will work but you cant install many custom ROM's on Phone after relocking.
Instruction
1. Get your keys through Sony bootloader unlocking official , Read the instruction there, just get the keys & preserve it for future use. (Dont follow the full instruction just get the key's )
2. Make sure that USB debugging is on
3. Turn off your device
4. Run flashtool --> Plugins --> Bootloader unlock & follow the instruction there.
Hint - For devices like xperia S, back button is volume down and home button is volume up.
Backup & restore
Before you start flashing Create a n android backup so if anything bad happens and you are not in position to find a solution RESTORE ()
To create back up
1. Boot into recovery
2. Restore & backup -> Backup (ROM + Kernel , data, apps, settings...everything)
Restore
1. Boot into recovery
2. Restore & backup -> Restore (for complete restore, ROM + Kernel , data, apps, settings...everything)
Custom Restore
1. Boot into recovery
2. Restore & backup -> Advance (choose your desired option)
Flashing
1. Download Rom + Latest Gapps(If required )
2. Copy them to SDCard
3. boot into Recovery
4. Factory Reset/Wipe data
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache
7. Advanced -> Fix permissions
8. Mounts and Storage -> Format /system
9. Install zip from SDCard -> Choose zip from SDCard -> Choose the Rom and install
10. Reboot (Its important for PAC ROM not with CM or slimbean you can flash gapps with ROM, but everytime befor flashing gapps i generally reboot my device and use it for a while)
11. Let the Rom settle a bit, then reboot into Recovery again
12. Install zip from SDCard -> Choose zip from SDCard -> Now choose the Gapps and install
13. Reboot
Hint - To go down & up, press volume down & up button resp. and to select press camera key.
To get back from where you started
Flash ICS Then -> [GUIDE] Get Bravia and Music Info working again on ICS with ReLock bootloader by revan17
Big THANKS to Original tool Developer's @Androxyde, @Bin4ry, @LEDelete ,eroot and @revan17
FAQ's
Q.Can i go back
A. Yes, how ? check guide again
Q. Is unlocking bootloader is important?
A. yes it is to install custom ROM's and kernels.
Q. Can i update my phone after unlocking bootloader
A. No
Q.Is unrooting is necessary to get official update
A. No, but bootloader relocking is!
Q. Is there is any way to get back bravia engine after unlocking bootloader?
A. No
Q. What are gapps
A. gapps is collection of google apps which cannot be included with ROM as it is illegal to do so.
Q. What is a kernel
A. In short kernel is intermediate b/w system software and hardware, for full explanation Visit THIS
Q. what is Bootloop ?
A. It happens when you flash a different android version kernel with different android version system, phone will stuck at logo and will restart again and again.
Q. How to get rid of bootloop ?
A, Extract boot.img from ROM zip file you are using and fastboot it with flashtool (instruction - check alternative method for installing recovery)
Q. Can i use Xperia S ROM's for SL, any special instruction ?
A. Yes you can use S ROM's for SL and no special instruction but for PAC ROM it is given there to remove the first 2 lines of the updater script found in the zip. META INF / com / google / android
Q. Recoverx eroors or downloading link not working
A. Recoverx is used by many all around the world so sometime due to high traffic it show error or download link dosent work, the only solution is to wait and try again.
Nice thread. Good for newcomers. Thanks .
Sent from my Xperia S using xda premium
thecrazyguy said:
Dont worry after relocking bravia engine will work
Click to expand...
Click to collapse
Are you sure? I think it won't until you do THIS
saymonek said:
Are you sure? I think it won't until you do THIS
Click to expand...
Click to collapse
Thanks, only thing I know we can get back bravia engine how.I don't until now, I will do reserch on that before adding it.
Sent from my LT26i using xda app-developers app
I have done everything you have said except the bootloader (my phone says its already unlocked), but I can't boot to recovery. The phone is rooted. What is the problem?
entermetallica said:
I have done everything you have said except the bootloader (my phone says its already unlocked), but I can't boot to recovery. The phone is rooted. What is the problem?
Click to expand...
Click to collapse
Which device you are using? Does recovery installed successfuly?
Try this - turn of your device then turn on it, as the phone start turning on press back button rapidly and continuously until you boot into recovery.
And about bootloader , if is already unlocked then good but who unlocked it, it is not unlocked by factory, 1 sec how can your phone, I am afraid you are telling it from, *#*#7378423#*#* to access the service menu.
In your phone, tap Service info > Configuration > Rooting Status. It is a status that your CAN BE UNLOCKED OR NOT IT DOSENT TELL ACTUAL BOOTLOADER STATUS.
Sent from my LT26i using xda app-developers app
thecrazyguy said:
Which device you are using? Does recovery installed successfuly?
Try this - turn of your device then turn on it, as the phone start turning on press back button rapidly and continuously until you boot into recovery.
And about bootloader , if is already unlocked then good but who unlocked it, it is not unlocked by factory, 1 sec how can your phone, I am afraid you are telling it from, *#*#7378423#*#* to access the service menu.
In your phone, tap Service info > Configuration > Rooting Status. It is a status that your CAN BE UNLOCKED OR NOT IT DOSENT TELL ACTUAL BOOTLOADER STATUS.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
i tried installing the bootloader via flashtool but nothing happens. i hold volume up, the blue led shows and then it boots normally.
entermetallica said:
i tried installing the bootloader via flashtool but nothing happens. i hold volume up, the blue led shows and then it boots normally.
Click to expand...
Click to collapse
Fastboot has issues with 64-bit operating systems. There is a solution somewhere. Google is your friend .
Sent from my Xperia S using xda premium
entermetallica said:
i tried installing the bootloader via flashtool but nothing happens. i hold volume up, the blue led shows and then it boots normally.
Click to expand...
Click to collapse
Follow these instruction
1. Turn of your device make sure USB debugging is on, unplug your USB cable.
2. Flashtool --> plugin -> bootloader unlock, then as instruction are there, Hold vol. DOWN key (if have touch back,home,menu keys like dots on xperia s) or back button(if you have hard keys, back, home, menu as shown in figure ) and connect.
3. Green LED will lid up some process will happen then it will ask to unplug again and connect with holding up vol. key or home, blue LED will lid up then it will ask for keys you got from sony in your email, enter them --> click unlock done
Note - you have to hold vol down or up key and at the same time you have to plug your device.
If still something is unclear feel free to ask.
Edit - if your are doing it right and have 64- bit PC then follow what mirajkar.aniket232 says. & what about your recovery does it working now... i have installed recovery again just to make sure method is correct and it is.
mirajkar.aniket232 said:
Nice thread. Good for newcomers. Thanks .
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
Thanks for the feedback & appreciating my work
Is it really needed to open another thread?? Cause i think plenty of threads available for new users for help already. The only thing requires for the newbies is to read. Which they don't unfortunately. Threads are below:
http://forum.xda-developers.com/showthread.php?t=1849170
http://forum.xda-developers.com/showthread.php?t=1963961
http://forum.xda-developers.com/showthread.php?t=2072025
http://forum.xda-developers.com/showthread.php?t=2134400
http://forum.xda-developers.com/showthread.php?t=1521563
http://forum.xda-developers.com/showthread.php?t=1876890
All these threads were meant for help. But your efforts are appreciated.
I did the steps but when I enter fastboot mode in the end it shows 'failed' and restarts the phone. Have been trying for a while now, no hope...
auni said:
Is it really needed to open another thread?? Cause i think plenty of threads available for new users for help already. The only think requires for the newbies is to read. Which they don't unfortunately.
All these threads were meant for help. But your efforts are appreciated.
Click to expand...
Click to collapse
I have read all thread you provided first two are specified for a topic, last 3.was general discussion not guide, third one was very similar, but you don't think this one easy and good for those people who don't want go in depth and just want enjoy their phone.
Sent from my LT26i using xda app-developers app
Oh! Finally u made it...? Good work bro. I really appreciate your hardwork... Keep it up
Sent from my LT26i using xda premium
I tryed the sony method and it went like they said but it still wont boot into recovery. I did all the steps right... The bootloader has been unlocked, I checked on flashtool.
And once again i am saying, efforts are great. Let's hope the users will read rather posting questions.
auni said:
And once again i am saying, efforts are great. Let's hope the users will read rather posting questions.
Click to expand...
Click to collapse
I read, but couldn't find anything to help me in my situation
entermetallica said:
I tryed the sony method and it went like they said but it still wont boot into recovery. I did all the steps right... The bootloader has been unlocked, I checked on flashtool.
Click to expand...
Click to collapse
Use flashtool it also have option for installing recovery or any method search the forum there are many methods, recoverx is best if not work then.try something else.... Search on Google. YouTube, xda where you can.
About your battery, you have asked this question not here but somewhere else... Charging more will effect battery life time you will need a replacement soon, a battery have limited life circle, any machine or battery cannot be ideal there is always some loss, more you use more the loss and replacement may be after 2 years but before then me.
Sent from my dark LT26ii using xda app-developers app
Will this work with any ics firmware on Xperia ion? Or any specific?
Sent from my LT28h using xda premium
cooolrider195 said:
Will this work with any ics firmware on Xperia ion? Or any specific?
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
Yes *it *will
Sent from my dark LT26ii using xda app-developers app
ROOTED USERS ONLY
I am not responsible for bricked devices.
TWRP: Download the img for your device HERE
via @ WACOMalt
Download Flashify from Google Play HERE
Under the FLASH tab using the Flashify app click Recovery Image.
Find the img file you just downloaded for your specific device.
Click on the img file then you will be prompted with a Flash Recovery? screen.
Click YUP if you would like to continue with the flash or MAYBE NOT... if you chose the wrong file or have changed your mind.
If you chose to continue flashing you will see a working box which says Flashing...
A box which says Flash Completed will show after flash is complete.
Click Reboot Now.
Done!
Formatting Cache delay fix
Tick Use rm -rf instead of formatting in the settings menu of TWRP.
Tested on T-Mobile D801 using img 2.6.3.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did that after i installed using freegee and what do you know a bootloop. restored stock image then reflashed and worked fine.
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
I've not had that issue on T-Mobile D801.
podagee said:
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
Click to expand...
Click to collapse
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
podagee said:
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
Click to expand...
Click to collapse
I tried this method before seeing this tread. I tried to flash clean ROM when going to boot up, black screen good thing backup worked threw twrp everthing I try threw twrp backup or wipes cashes and that works just fine is there a fix for att users. Thanks
Sent from my LG-D800 using xda app-developers app
podagee said:
THIS METHOD DOES NOT WORK!!
you will have a black screen and no recovery DO NOT ATTEMPT>
AT&T users dont do it.
Click to expand...
Click to collapse
Really not needed, to post in this manner. Just because it did not work for you does not mean it will not for others...
And actually I am a AT&T User LG-D800 and it work just fine for my device, did you have the correct img file.
podagee said:
another problem ive encountered is that once you use flashify to install recovery it does not boot into recovery at all. it boots into a black screen.
freegee boots into recovery also but you cant change versions of twrp. its at 2.6.3.0 and you cant install the 2.6.3.3 zip. tried numerous times and it fails.
Click to expand...
Click to collapse
As stated it work for me, I utilized the app and installed recovery TWRP and I booted into it and updated the TWRP with the zip.
Keep in mind there has been issues with using the app, BUT there is warnings as with all tweaking/rooting/flashing......
I flashed TWRP using Flashify as well. Done on the D802 as per the instruction. Recovery works fine.
Judge Joseph Dredd said:
Really not needed, to post in this manner. Just because it did not work for you does not mean it will not for others...
And actually I am a AT&T User LG-D800 and it work just fine for my device, did you have the correct img file.
As stated it work for me, I utilized the app and installed recovery TWRP and I booted into it and updated the TWRP with the zip.
Keep in mind there has been issues with using the app, BUT there is warnings as with all tweaking/rooting/flashing......
Click to expand...
Click to collapse
the images i used were provided from here/ the link. ive tried numerous times and nothing. please share the image you used, were you on D80010o?
---------- Post added at 08:06 AM ---------- Previous post was at 07:28 AM ----------
it seems the loki aboot from the link posted for recovery images is not compatible with th D80010o. if a fix were provided there would be no problems flashing.
yup i can confirm that using flashify after the ota and root does not work on the att d800. if you have successfully done it JudgeJosephDredd please give any directions that would help. cause no matter what image i flash it does not work......at all. thanks in advance if you decide to help.
This app ****ing rocks. Thank you for introducing me to flashify. I used it to upgrade cwm and cm11 in under 5 steps. That's pretty impressive to me.
Guys is there a difference between using this and using Freegee from the Playstore which ive already done. If this way is better how do i undo the Freegee, do i just uninstall it as TWRP already exists on my phone.
mcteague said:
Guys is there a difference between using this and using Freegee from the Playstore which ive already done. If this way is better how do i undo the Freegee, do i just uninstall it as TWRP already exists on my phone.
Click to expand...
Click to collapse
You don't need to worry. They are different ways of arriving at the same destination.
Just uninstall Freegee.
Worked for me. T-Mobile G2.
Sent from my LG-D801 using Tapatalk
Works fine on D802
Sent from my LG-D802 using Tapatalk
k3xx said:
Works fine on D802
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
What did you use? the 2.6.3.3 D802 img at the link provided?
Yep I'm used that link (to be clear: http://techerrata.com/browse/twrp2/g2d802) but first I installed the 2.6.3.2 .img file cause flashify supports better img files for recovery than zip and then used that TWRP to flash the 2.6.3.3 .zip file.
Sent from my LG-D802 using Tapatalk
Every time I try Flashify on either of the two img files for Verizon, it just reboots to a black screen. After first black screen I do the hard reset with the power button but still no luck.
Guys I'm thinking of flashing recovery via flashify, I did have recovery gained via freegee but got stuck in a boot loop while flashing Omni ROM and couldn't enter recovery so had to restore full software via LG Launcher software. My question is are there any safe roms out there for us yet, or was it a problem with freegee recovery
Sent from my LG-D802 using Tapatalk
mcteague said:
Guys I'm thinking of flashing recovery via flashify, I did have recovery gained via freegee but got stuck in a boot loop while flashing Omni ROM and couldn't enter recovery so had to restore full software via LG Launcher software. My question is are there any safe roms out there for us yet, or was it a problem with freegee recovery
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I don't its freegee did you check md5 before you flashed the ROM
Sent from my Nexus 4 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the 3rd version of Hazard17's Toolkit. Second version had been realised only in polish language so... I hadn't updated this thread.
Features:
Installing Blastagator's BUMPED TWRP 3.0.0.4
Installing BUMPED PhilZ recovery (not recomended :E)
Bootloader changing (normal mode and via sideload)
Auto update engine
Installing your own bumped recovery image
Bumping your own recovery image
Connecting phone via WiFi & USB
Installing LG's phone drivers
Changing Mourinho's pictures by taping "J" or "M" on computer keyboard
Playing Chelsea's fans "Jose Mourinho" song after click the picture
Donate me for my hard work.
Rooting Android JellyBean, KitKat and Lollipop
Entering and leaving Download Mode
Get COM port of Your phone
Install android package files
Install zip packages via sideload mode in recovery
Screenshots:
Changeolg:
Version 3.1
- Added possibility to enter into Download Mode, and leave it.
- Added engine which allow You to get Download Mode COM port.
- Now You can root Your phone via Toolkit!
*Jelly Bean (thanks to IOMonster)
*KitKat (thanks to DatRoot)
*Lollipop (thanks to avicohh)
- Added possibility to install apk files.
- Added possibility to flash zip packages via sideload mode in recovery
- Fixed bug which make impossible to use Toolkit, when You was disconected from the Internet.
- Fixed bug which disabled all buttons in Toolkit, and not re-enabled them.
- Fixed phone informations engine.
- Updated Hydra Downloader to version 1.1.
- Fixed few smaller bugs
Version 3.0
- Toolkit has been built from scratch... so everything has changed.
Download:
Version v3.1
Version v3.0
XDA:DevDB Information
Toolkit, a Tool/Utility for the LG G2
Version Information
Status: Stable
Current Stable Version: v3.0
Stable Release Date: 2016-03-14
Created 2014-03-23
Last Updated 2016-03-14
Reserved
If You have any problems with Alligator Toolkit, You can use this simple application which will remove all data of Alligator Toolkit. After using this tool, Toolkit will be automaticly installed once again - from scratch.
Download:
https://drive.google.com/open?id=0B0FPF13M3TkAMldobU11Q2hqcTQ
Hi Hazard, tks for the kit. Before I proceed I would like to clarify exact steps to go from stock 4.2.2 to KK+root+PhilZrecovery.
In previous 1.3 thread I saw a post :
you must flash these
1- rom.zip
2- KitKat BaseBand
3- Patched Kernels
4- UPDATE-SuperSU-v1.93.zip
So, I've downloaded "rom" plus KKbaseband+Patched kernel and Super SU 1.93.
I've looked to your runme.bat and I'm a bit confused: is option 5) From zero to a custom ROM and Kernel suppose to do all the work ? I do not see on the script any part to install the patched kernel.
Would this be the steps ?
Prior: copy ROM.zip and patched kernel to phone/sdcard
1 - from kit menu 2) Root
2 - from kit menu 6) Change baseband
3 - install PhilZ recovery from kit menu 1) Install Recovery
reboot to recovery
4 - flash ROM.zip (any wipes ?)
5 - flash patched kernel
reboot and hopefully KK+root+recovery
Thanks for your help
I seek your assistance here. Currently I'm in stock KK 4.4.2. I would like to downgrade back to KK 4.2.2 as wish to install some custome rom for 4.4.2. How am I proceed from here. Possible?
joliv said:
Hi Hazard, tks for the kit. Before I proceed I would like to clarify exact steps to go from stock 4.2.2 to KK+root+PhilZrecovery.
In previous 1.3 thread I saw a post :
you must flash these
1- rom.zip
2- KitKat BaseBand
3- Patched Kernels
4- UPDATE-SuperSU-v1.93.zip
So, I've downloaded "rom" plus KKbaseband+Patched kernel and Super SU 1.93.
I've looked to your runme.bat and I'm a bit confused: is option 5) From zero to a custom ROM and Kernel suppose to do all the work ? I do not see on the script any part to install the patched kernel.
Would this be the steps ?
Prior: copy ROM.zip and patched kernel to phone/sdcard
1 - from kit menu 2) Root
2 - from kit menu 6) Change baseband
3 - install PhilZ recovery from kit menu 1) Install Recovery
reboot to recovery
4 - flash ROM.zip (any wipes ?)
5 - flash patched kernel
reboot and hopefully KK+root+recovery
Thanks for your help
Click to expand...
Click to collapse
no , that option have some bugs so has been removed
if you want to do that
you must flash them manual in recovery
mlm1102003 said:
no , that option have some bugs so has been removed
if you want to do that
you must flash them manual in recovery
Click to expand...
Click to collapse
Ok... so first root and install recovery, then from recovery flash kk baseband plus Rom plus patch kernel?
Sent from my LG-D802 using XDA Premium 4 mobile app
joliv said:
Ok... so first root and install recovery, then from recovery flash kk baseband plus Rom plus patch kernel?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
to 4.2.2 root and philz
go to recovery mod
wipe factory reset and choise
clean for new rom
install zip
choise KK baseband
install zip
choise your custom room
reboot ....and enjoy
recovery and root its ok
shudoha said:
to 4.2.2 root and philz
go to recovery mod
wipe factory reset and choise
clean for new rom
install zip
choise KK baseband
install zip
choise your custom room
reboot ....and enjoy
recovery and root its ok
Click to expand...
Click to collapse
No need for patched kernel or is it already in Rom or baseband? If not needed will recovery remain after?
Sent from my LG-D802 using XDA Premium 4 mobile app
joliv said:
No need for patched kernel or is it already in Rom or baseband? If not needed will recovery remain after?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
need just kk baseband
for kernel its depend your custom room
with cloudypro II
or Lg g2 pro port Optimus (its better really)
no need kernel or patch or other
just flash baseband
and flash optimus rom
and reboot
and enjoy
Is OK for 4.4.2
To flash recovery?
ScreenShot
shudoha said:
need just kk baseband
for kernel its depend your custom room
with cloudypro II
or Lg g2 pro port Optimus (its better really)
no need kernel or patch or other
just flash baseband
and flash optimus rom
and reboot
and enjoy
Click to expand...
Click to collapse
Need help. Upon reboot stuck at LG logo. Trying to boot to recovery brings factory reset screen. Push 3 times power button and nothing. Any suggestion before I'll go to go back to stock procedure (always tricky) ? Root plus Philz went well. Flashed ROM + kk baseband + supersu from within Philz recovery.
OK... Back to stock.
Sent from my LG-E975 using XDA Premium HD app
joliv said:
Need help. Upon reboot stuck at LG logo. Trying to boot to recovery brings factory reset screen. Push 3 times power button and nothing. Any suggestion before I'll go to go back to stock procedure (always tricky) ? Root plus Philz went well. Flashed ROM + kk baseband + supersu from within Philz recovery.
OK... Back to stock.
Sent from my LG-E975 using XDA Premium HD app
Click to expand...
Click to collapse
in 4.2.2 + root + recovery
flash kk baseband for your device exemple kk baseband d802
flash optimus pro rom (its better really)
no flash supersu
after flash optimus with aroma installer
reboot your phone and enjoy
Loving the username and toolkit name what a player he is.
Sent from my LG-D802 using XDA Premium 4 mobile app
joliv said:
Need help. Upon reboot stuck at LG logo. Trying to boot to recovery brings factory reset screen. Push 3 times power button and nothing. Any suggestion before I'll go to go back to stock procedure (always tricky) ? Root plus Philz went well. Flashed ROM + kk baseband + supersu from within Philz recovery.
OK... Back to stock.
Sent from my LG-E975 using XDA Premium HD app
Click to expand...
Click to collapse
you must have 4.2.2 rooted + recovery then do exactly what i said befor
Code:
http://forum.xda-developers.com/showpost.php?p=51293067&postcount=39
adamski123 said:
Loving the username and toolkit name what a player he is.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Me too!
Jose Mourinho! <3 :good:
hierophantis said:
Is OK for 4.4.2
To flash recovery?
Click to expand...
Click to collapse
No, it won't be possible to realese new loki flash version, becouse new LG bootloader is looki-proof
Sideload
Which ROM should I use for Sideload ?, mine is LG G2 AT&T D800 unlocked with GPro 2 ROM.
Today I found bug with sideload option. I will solve it, maybe today
shudoha said:
to 4.2.2 root and philz
go to recovery mod
wipe factory reset and choise
clean for new rom
install zip
choise KK baseband
install zip
choise your custom room
reboot ....and enjoy
recovery and root its ok
Click to expand...
Click to collapse
i have root and rec 2.7
i 4 wipe
then install kk baseband
then install rom like u said
but stuck at lg icon
why :crying::crying:
nhanngoctien said:
i have root and rec 2.7
i 4 wipe
then install kk baseband
then install rom like u said
but stuck at lg icon
why :crying::crying:
Click to expand...
Click to collapse
to fix your problem
http://forum.xda-developers.com/showpost.php?p=51289700&postcount=35
to instal with root and recovery
http://forum.xda-developers.com/showpost.php?p=51293067&postcount=39
This is the LeEco Le Pro 3's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
I didn't try it yet
But Thank you for your work,
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
It is compatible for the lepro3? I used it before for oneplus2.
meuhmeuh51 said:
It is compatible for the lepro3? I used it before for oneplus2.
Click to expand...
Click to collapse
Yes, it's completely compatible, i have tested it on my leeco le pro 3
mauronofrio said:
Yes, it's completely compatible, i have tested it on my leeco le pro 3
Click to expand...
Click to collapse
ok I will try
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently
Sent from my SM-P600 using XDA-Developers Legacy app
mauronofrio said:
Someone have tried my Tool All In One for Leeco Le Pro 3?
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Click to expand...
Click to collapse
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app
toanau said:
Can I go back to completely stock with this tool kit? I have the 727 model with a custom ROM currently<br />
<br />
Sent from my SM-P600 using XDA-Developers Legacy app
Sent from my LEX727 using XDA-Developers Legacy app
Click to expand...
Click to collapse
no
Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.
kaivorth said:
Think I just bricked my Le Eco Pro 3. Dragged the ROM into the root system of my X727 I was going to flash, Lineage 13
Enabled USB Debug
Unlocked Bootloader
Flashed GS Custom Recovery
Wiped Everything
Went to Flash the ROM, and nothing showed up...
I rebooted, and now I think the stock recovery re-installed itself, and there is no ROM present because I wiped everything.
Help
I just get a flicker of the Le Eco Boot Screen, then it shuts off. Can't get into ADB or Recovery.
Click to expand...
Click to collapse
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away
kaivorth said:
Thankfully I fixed it.
Flashed an aboot file, and all a sudden, Lineage 13 started up. You cannot believe how psyched I was. I was on eBay looking at my next phone, and all angry that I messed up my perfectly good phone.
I don't think this tool had anything to do with it. I was unforunate enough to wipe my phone before I went to install the ROM, and it wiped the ROM too. When it restarted, it had nothing to boot too. Just used Fastboot to flash the aboot file, and sideloaded the ROM and flashed away
Click to expand...
Click to collapse
Had the same issue and same fix for my attempt into unlocking bootloader and installing custom recovery and rom.
Did you also flash the 5.8.0.19 aboot file? I'm wondering if flashing a newer one is a good idea...
Sent from my LEX727 using Tapatalk
Very good tool thank you very much Mauro
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
The twrp 3.1.0 is better no matter the dev
Wortelstok said:
Thanks Mauro, it helped me install Omni ROM.
Question, I had two TWRP versions to choose from, I installed the latest 3.02. Is it useful to update the TWRP with e.g. the 3.1.0 from Darkobas?
Click to expand...
Click to collapse
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode
mauronofrio said:
Maybe yes, in the next Tool update i will update all recovery available, for now you can flash it through Manual Mode
Click to expand...
Click to collapse
Thank you for all your effort for our Le Pro 3 :good:
Does this unlock bootloader with the current us version 21s?
I try using this Tool ALL in One on the Le Pro 3 but unable to unlock the bootloader as it displayed
"FAILED <remote: oem unlock is not allowed).
I already checked "ON under the OEM UNLOCKING" and "USB debugging" is "ON" also under the Developer Option before turning off the phone and boot it (volume down + Power) into Fastboot Mode.
Please help. Any advise is appreciated.
coolmaster121 said:
Can you get to fastboot? Power button + vol up? If you can you can probably flash a chinese bootloader and then try booting again
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
fastboot should be vol down