Related
I was trying to flash a mod inside cwm and when phone rebooted it was at sony logo and stuck, So I did a hard reboot using home and vol up keys... after that now my screen is black and unresponsive, only backlit is working. HELP
Elixx13 said:
I was trying to flash a mod inside cwm and when phone rebooted it was at sony logo and stuck, So I did a hard reboot using home and vol up keys... after that now my screen is black and unresponsive, only backlit is working. HELP
Click to expand...
Click to collapse
Is your phone recognized by PC when connect ? If yes, flashing Stock Rom by flash tool might solve that.
Sent from my LT26i using Tapatalk 2
lilude56214 said:
Is your phone recognized by PC when connect ? If yes, flashing Stock Rom by flash tool might solve that.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Guys phone is completely unresponsive, you can't turn it on, you cant boot into flash mode or fastboot mode... Its just turned off and it used to have backlit on with the entire screen black, when i plug micro usb cable it only tries to Charge the battery (RED led is on, no Orange led), for several hours. Nothing happens.
I Really need help. Thanks!
Elixx13 said:
Guys phone is completely unresponsive, you can't turn it on, you cant boot into flash mode or fastboot mode... Its just turned off and it used to have backlit on with the entire screen black, when i plug micro usb cable it only tries to Charge the battery (RED led is on, no Orange led), for several hours. Nothing happens.
I Really need help. Thanks!
Click to expand...
Click to collapse
Try to flash using flashtool. Press volume down and connect to pc when flashtool says. See if anything happens.
Let know by posting.
Sent from my LT26i using xda app-developers app
bluechelsea said:
Try to flash using flashtool. Press volume down and connect to pc when flashtool says. See if anything happens.
Let know by posting.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I dont mean to be rude but... Are you kidding me right?. Phone is completely unresponsive it doesnt answer to any type of buttons combinations, thats why i cant boot into flash mode and use a fresh .ftf install... Its just off and as far as I know "bricked":crying:
Check 2nd post in here.
http://forum.xda-developers.com/showthread.php?t=2049813
Sent from my Xperia ion using xda app-developers app
hope this helps
-HOLD Volume up and Power - till phone viabrates 3 times ,
-Plug Start up sony Companion , go to support , then update , then Repair
-Follow the steps
And you should have your Device Back
Sorry if something is mildly incorrect , typing everything from the top of my head
and sorry for any incorrect Grammar (English is my 5th Language)
pharix said:
Check 2nd post in here.
http://forum.xda-developers.com/showthread.php?t=2049813
Sent from my Xperia ion using xda app-developers app
Click to expand...
Click to collapse
Thank you, my phone has no blinking red light, but when I plugged it to my PC to start trying some tricks, the led went off. And I think is dead again, should I wait until red led comes back? Also, Flashtool sees my device as MTP or something like that and when I try to soft reset it, Flashtool says Disconnected and then connected, so hopes are high. (No Screen at this time, still black, no boot logo or battery icon)
Did ur phone have enough charge? If may have to charge it properly before it can boot properly.
Sent from my LT26i using xda app-developers app
When connected to PC phone doesnt BootLoop, Im stuck at constant red led ON.. No response here.
Any Thoughts_??
Hello friends,
I am new (and dumb too) to XDA and all the root and all these things.
I just rooted and unlocked bootloader of my Xperia S.
and flashed the Jelly bean AOSP ROM as in following thread.
[ROM]JB AOSP 4.2.1 alpha 2
I was playing in recovery mode and I don't which option I choose but I think something like "Wipe Partitions" or "Format partitions"
After that I rebooted phone but it just went dead.
I think the battery was low (~15%) when I messed up.
Now it's not responding to anything, no boot, no recovery mode, no fastboot, no flash mode,(vol + or vol - with power) :crying:
Only thing was that I put it on wall charger at 2:00 am (no LED), at morning 10::am RED LED was strong on, but still no fastboot and flash mod e while connecting to pc :crying:
Still I kept on charging whole day ( I saw some threads regarding XPERIA S UNBRICK )
now after ~8hours, connected to pc but still detection.
Also I want to mention that When LED was on while charging and the I connected to pc , IF LED went ON , then phone not detected by computer.
and after sometime the LED went off , then Device says it connected as in screen shot below, but no fastboot or flashmode.
Please help me. Sorry for bad representation.
Hi, the i'm not a phone wizz but it happen't to me a few days ago as well. Tried everything almost bought a new phone because i thought it was bricked....
Now it's alive and kickin'.
For me worked:
Mine randomly started up till the battery was empty, 2-3min and that was enough.
Download the Emma flashtool, it's from Sony itself.
Install the flashtool and start it..let it settle.
With the red light on when it starts try to get it in plug in the usb in the phone (it's already connected in the pc) while holding the volume button down, and when you're lucky the flashtool will recognize the phone and will collect the correct software/ROM/kernel. Just hit the install/repair button and that worked for me, it installed the correct software and it was alive again...
Wish you all the luck.
koossmatrooz said:
Hi, the i'm not a phone wizz but it happen't to me a few days ago as well. Tried everything almost bought a new phone because i thought it was bricked....
Now it's alive and kickin'.
For me worked:
Mine randomly started up till the battery was empty, 2-3min and that was enough.
Download the Emma flashtool, it's from Sony itself.
Install the flashtool and start it..let it settle.
With the red light on when it starts try to get it in plug in the usb in the phone (it's already connected in the pc) while holding the volume button down, and when you're lucky the flashtool will recognize the phone and will collect the correct software/ROM/kernel. Just hit the install/repair button and that worked for me, it installed the correct software and it was alive again...
Wish you all the luck.
Click to expand...
Click to collapse
Thank you for your reply.
I did it but when connected phone with vol - , red LED was strong on , but device didn't detected by OS, nor Emma, nor with flashtool.
but after 1 minute the LED went off and at the same moment device detected in PC OS (as sound of new hardware detected sound of windows heard) and flashtool log was-
09/042/2013 22:42:12 - INFO - Device connected with USB debugging off
09/042/2013 22:42:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
no response from Emma. Also no flashboot or fastboot :crying:
Have installed the fastboot drivers for your phone?
If you connect your phone with vol- or vol+ you shouldn't get a red light, it should be blue or green.
Try charge phone for a while then download a jellybean kernel (e.g. *.sin file), then adb push the kernel to the phone. Boot into recovery and refresh rom.
This will require adb and drivers both available in the flashpoint folder.
Sent from my Xperia S using xda app-developers app
o0 Matt 0o said:
Have installed the fastboot drivers for your phone?
If you connect your phone with vol- or vol+ you shouldn't get a red light, it should be blue or green.
Try charge phone for a while then download a jellybean kernel (e.g. *.sin file), then adb push the kernel to the phone. Boot into recovery and refresh rom.
This will require adb and drivers both available in the flashpoint folder.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Thank you for reply.
OK I will try. But the phone RED LED going on as a charging indicator only.
(Generally when phone shuts down at 0% battery and if we boot it up without charging, it turns on and turn off , after i fyou connect the charger, the instance the RED LED goes on but screen remains blank, After sometime the screen shows charging battery )
the same case is happening with me.
Should I remove battery, will it void its warranty?
pmsdhawale said:
Thank you for reply.
OK I will try. But the phone RED LED going on as a charging indicator only.
(Generally when phone shuts down at 0% battery and if we boot it up without charging, it turns on and turn off , after i fyou connect the charger, the instance the RED LED goes on but screen remains blank, After sometime the screen shows charging battery )
the same case is happening with me.
Should I remove battery, will it void its warranty?
Click to expand...
Click to collapse
So u can charge ur phone? It sounds like all u need to do is reinstall a kernel then a rom. No need to remove battery. If you connect urban phone to a usb,when off, and hold a volume key you should not get a red led. You get a red led when u don't have flashmode and/or fastboot.
Sent from my Xperia S using xda app-developers app
Have you tried a 'hard' reset of the phone/power.
Phone may be in a loop with power still on or some other state.
Hold the power button -and- volume up button for a good 10 seconds.
You may feel the phone vibrate once then a few seconds later it vibrates three times in rapid succession.
This should indicate the phone is powered down.
If powered down, it may then be able to recharge itself and if you're lucky show a battery charging icon.
When recharged, I'd use SEUS to reload the stock firmware.
Good luck.
Dr Goodvibes said:
Have you tried a 'hard' reset of the phone/power.
Phone may be in a loop with power still on or some other state.
Hold the power button -and- volume up button for a good 10 seconds.
You may feel the phone vibrate once then a few seconds later it vibrates three times in rapid succession.
This should indicate the phone is powered down.
If powered down, it may then be able to recharge itself and if you're lucky show a battery charging icon.
When recharged, I'd use SEUS to reload the stock firmware.
Good luck.
Click to expand...
Click to collapse
Thank you for suggestion but its not responding.
Also I unlocked bootloader so no use of SUS .
o0 Matt 0o said:
So u can charge ur phone? It sounds like all u need to do is reinstall a kernel then a rom. No need to remove battery. If you connect urban phone to a usb,when off, and hold a volume key you should not get a red led. You get a red led when u don't have flashmode and/or fastboot.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Its getting red LED because battery is not charging I think.
And can You explain the process written or a link to tutorial .
One more question
Will my warranty be void if I remove my Battery?
pmsdhawale said:
Its getting red LED because battery is not charging I think.
And can You explain the process written or a link to tutorial .
One more question
Will my warranty be void if I remove my Battery?
Click to expand...
Click to collapse
Step 1 - Download a kernel.
Download a kernel like nova (http://forum.xda-developers.com/showthread.php?p=35055975). this will Download a zip file, open the file and extract the file kernel.elf. note nova is a jellybean kernel.
step 2 - Push the kernel file to the phone
http://forum.xda-developers.com/showthread.php?p=23181182
[Xperia S][INFO][REF] All that u need to know before u begin
Step 3 - boot the phone into recovery and install a Rom zip file then reboot.
Step 4 - hit thanks.
Not sure about removing the battery. I have never need to do it.I guess it would be ok if you don't damage anything or break any security seals. Btw u know when u charge your phone when the battery is below 90% it displays a red light hey.
Sent from my Xperia S using xda app-developers app
o0 Matt 0o said:
Step 1 - Download a kernel.
Download a kernel like nova (http://forum.xda-developers.com/showthread.php?p=35055975). this will Download a zip file, open the file and extract the file kernel.elf. note nova is a jellybean kernel.
step 2 - Push the kernel file to the phone
http://forum.xda-developers.com/showthread.php?p=23181182
[Xperia S][INFO][REF] All that u need to know before u begin
Step 3 - boot the phone into recovery and install a Rom zip file then reboot.
Step 4 - hit thanks.
Not sure about removing the battery. I have never need to do it.I guess it would be ok if you don't damage anything or break any security seals. Btw u know when u charge your phone when the battery is below 90% it displays a red light hey.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Its not booting .
Nor in flashmod nor in fastboot mode. then how can I push the kernal.
Can u confirm if you have installed the fastboot drivers
Sent from my Xperia S using xda app-developers app
Same problem here. Red led, no charge. No fasboot.
Nova Kernel + Nova Rom.
o0 Matt 0o said:
Can u confirm if you have installed the fastboot drivers
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
yes, they are installed.
I connected my friend's xperia p and it detected in both fastboot and flashmod.
Trying it on ubuntu and thenafter windows 7.....
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
pmsdhawale said:
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
Click to expand...
Click to collapse
So what happened? I have the same problem.
put your device to a cool place and try install a kernel like nova
pmsdhawale said:
Hello friends,
I am new (and dumb too) to XDA and all the root and all these things.
I just rooted and unlocked bootloader of my Xperia S.
and flashed the Jelly bean AOSP ROM as in following thread.
[ROM]JB AOSP 4.2.1 alpha 2
I was playing in recovery mode and I don't which option I choose but I think something like "Wipe Partitions" or "Format partitions"
After that I rebooted phone but it just went dead.
I think the battery was low (~15%) when I messed up.
Now it's not responding to anything, no boot, no recovery mode, no fastboot, no flash mode,(vol + or vol - with power) :crying:
Only thing was that I put it on wall charger at 2:00 am (no LED), at morning 10::am RED LED was strong on, but still no fastboot and flash mod e while connecting to pc :crying:
Still I kept on charging whole day ( I saw some threads regarding XPERIA S UNBRICK )
now after ~8hours, connected to pc but still detection.
Also I want to mention that When LED was on while charging and the I connected to pc , IF LED went ON , then phone not detected by computer.
and after sometime the LED went off , then Device says it connected as in screen shot below, but no fastboot or flashmode.
Please help me. Sorry for bad representation.
Click to expand...
Click to collapse
Make sure your phone is absolutely off
Put it to a cool place like refrigerator for a couple of hours
then flash a kernel so fast by fastboot.exe
If works you can full charge your device and you are lucky.
pmsdhawale said:
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
Click to expand...
Click to collapse
Got it replaced !!
They said that they've changed motherboard !!
Again rooted and unlocked boot loader !
Using PAC ROM latest 4.2.2
NEED HELP!!
I've tried this on my ZL.
I made a backup with TouchRecovery and save the home.apk.
After moving the downloaded home.apk and rebooting. I have a bootloop. It started into the bootanimation and stays there.
I couldn't turn off my ZL to load in flashmode.
what can i do?
Have u try to push a small yellow button at the back of ur phone(near ur sdcard)? This button will reset ur phone.
Sent from my C6503 using Tapatalk 2
butatx said:
Have u try to push a small yellow button at the back of ur phone(near ur sdcard)? This button will reset ur phone.
Sent from my C6503 using Tapatalk 2
Click to expand...
Click to collapse
tried yes, but the phone only reboot. But Recovery didnt't work
Could load into flashmode after emptying the battery to 0%. The Phone gone out an i could connect the zl in flashmode.
mpf37 said:
tried yes, but the phone only reboot. But Recovery didnt't work
Could load into flashmode after emptying the battery to 0%. The Phone gone out an i could connect the zl in flashmode.
Click to expand...
Click to collapse
it's happening to me now...
so i should just wait until he battery runs out, then again turning it on using USBcable and vol up button, then flash the rom again?
In my case it works...
I dont know an other method
Have you tried the same mod?
Sent from my C6503 using xda app-developers app
mpf37 said:
In my case it works...
I dont know an other method
Have you tried the same mod?
Sent from my C6503 using xda app-developers app
Click to expand...
Click to collapse
i can't get into fastboot... only red LED lights up whennim pressing the vol up button and inserted the cable... damn i need help. hohoho
armedzerox said:
i can't get into fastboot... only red LED lights up whennim pressing the vol up button and inserted the cable... damn i need help. hohoho
Click to expand...
Click to collapse
Open Flashtool or SUS an try flashmode (Vol-)
mpf37 said:
Open Flashtool or SUS an try flashmode (Vol-)
Click to expand...
Click to collapse
i can't get it to work. i did insert the cable while holding the vol down button. the LED turned RED, just like it is when it was charging. the same thing happen if i holding the vol up button... flashtool didn't recognize my device though
armedzerox said:
i can't get it to work. i did insert the cable while holding the vol down button. the LED turned RED, just like it is when it was charging. the same thing happen if i holding the vol up button... flashtool didn't recognize my device though
Click to expand...
Click to collapse
have you charged your zl a bit without turning on?
mpf37 said:
have you charged your zl a bit without turning on?
Click to expand...
Click to collapse
yeah, around 5 minutes. i guess i need to let it charge for lil bit longer? 10 minutes enough?
armedzerox said:
yeah, around 5 minutes. i guess i need to let it charge for lil bit longer? 10 minutes enough?
Click to expand...
Click to collapse
Do not know sorry
try it...
mpf37 said:
Do not know sorry
try it...
Click to expand...
Click to collapse
Okay bro~~~ it's done. charge until the red LED goes off, pushed the power button, no screen display, hold vol up while inserting USB cable, and it worked great~ now im in avatar ROM, but it doesn't have xperia bravia settings... disappointing
I updated my Xperia Ion last night. Unfortunately, my phone was shut down by itself and then it've got bootloop but it s quite different from general bootloop because, when to Sony logo appear, it takes about 20 second and slowly disappear and reboot again about 6-7 times.
I've tried to carge it and i get the red led. However, it turns on automatically and everthing happen again. So, i tried to hard reset (3 vibrate) and do wall charging but it's still the same. After that, i've tried to use rubber band for flash mode while it was charging in red LED, but my laptop can't access my phone in flash mode and it's turned on by itself again. What should i do? Thank you in advance. :crying:
Naisamui99 said:
I updated my Xperia Ion last night. Unfortunately, my phone was shut down by itself and then it've got bootloop but it s quite different from general bootloop because, when to Sony logo appear, it takes about 20 second and slowly disappear and reboot again about 6-7 times.
I've tried to carge it and i get the red led. However, it turns on automatically and everthing happen again. So, i tried to hard reset (3 vibrate) and do wall charging but it's still the same. After that, i've tried to use rubber band for flash mode while it was charging in red LED, but my laptop can't access my phone in flash mode and it's turned on by itself again. What should i do? Thank you in advance. :crying:
Click to expand...
Click to collapse
ok...do this...once in bootloop...vol+ and power button.....then connect in flashmode...make sure you are doing it correctly...vol down/up+power button...if phone connects and disconnects then problem with drivers....install drivers and start over again
Dark Wraith said:
ok...do this...once in bootloop...vol+ and power button.....then connect in flashmode...make sure you are doing it correctly...vol down/up+power button...if phone connects and disconnects then problem with drivers....install drivers and start over again
Click to expand...
Click to collapse
I got the blue LED after that Flashtool told me that i need the driver. After that, my laptop installed the driver automatically and then Flashtool informed that my device connected with not debugging mode and MTP mode. now, i see just black screen and nothing happen and i can't reset or hard reset.
Naisamui99 said:
I got the blue LED after that Flashtool told me that i need the driver. After that, my laptop installed the driver automatically and then Flashtool informed that my device connected with not debugging mode and MTP mode. now, i see just black screen and nothing happen and i can't reset or hard reset.
Click to expand...
Click to collapse
it should be green led.blue led is fastboot mode i think. you need flashmode
and a little more details. what were you trying to update before your phone got into bootloop?got an unlocked B/L or locked?
One more thing. Go to flashtool folder>driver folder>drivers.exe(or something like that). Install drivers for your device first. then go to the bottom of the list. select flashmode and fastboot drivers and install those as well
Dark Wraith said:
it should be green led.blue led is fastboot mode i think. you need flashmode
and a little more details. what were you trying to update before your phone got into bootloop?got an unlocked B/L or locked?
One more thing. Go to flashtool folder>driver folder>drivers.exe(or something like that). Install drivers for your device first. then go to the bottom of the list. select flashmode and fastboot drivers and install those as well
Click to expand...
Click to collapse
Oh, I see. But I'm also trying to access the flashmode (down volume) but it still bootloop again. Anyway, I was installing custom rom in CMW and my ION is still Locked.
P.S. I can get i nfastboot mode but not for flashmode.
Naisamui99 said:
Oh, I see. But I'm also trying to access the flashmode (down volume) but it still bootloop again. Anyway, I was installing custom rom in CMW and my ION is still Locked.
P.S. I can get i nfastboot mode but not for flashmode.
Click to expand...
Click to collapse
you have CWM>???(CWM for locked Bl i guess)
Did you take a backup???
if not...check if ROM was meant for unlocked B/L. If not,wipe cache and dalvik cache..wipe data and try...
if yes, then u have only one option. Using flashmode(green led) use flashtools to flash stock firmware
Dark Wraith said:
you have CWM>???(CWM for locked Bl i guess)
Did you take a backup???
if not...check if ROM was meant for unlocked B/L. If not,wipe cache and dalvik cache..wipe data and try...
if yes, then u have only one option. Using flashmode(green led) use flashtools to flash stock firmware
Click to expand...
Click to collapse
yup, i used CMW for locked BL
and Yes,i did.
But, my phone doesn't respond me to get into flashmode
Naisamui99 said:
yup, i used CMW for locked BL
and Yes,i did.
But, my phone doesn't respond me to get into flashmode
Click to expand...
Click to collapse
if you can get into cwm just restore the backup.
Dark Wraith said:
if you can get into cwm just restore the backup.
Click to expand...
Click to collapse
For now, i can't access CMW anymore.
Naisamui99 said:
For now, i can't access CMW anymore.
Click to expand...
Click to collapse
Then switch it off completely...Put it to charge...(one hour or so)..open flashtool...now if fastboot mode is getting connected then flashboot would also work...search in google how to enter flash mode(which key combinations)..now initialize flashing and wen it asks to plug...plug it in flash mode(make sure u are not pressing power button)..it should be vol+/- only while plugging in....and tell me what does your log say after that...
Dark Wraith said:
Then switch it off completely...Put it to charge...(one hour or so)..open flashtool...now if fastboot mode is getting connected then flashboot would also work...search in google how to enter flash mode(which key combinations)..now initialize flashing and wen it asks to plug...plug it in flash mode(make sure u are not pressing power button)..it should be vol+/- only while plugging in....and tell me what does your log say after that...
Click to expand...
Click to collapse
Actually, I've done like this before. But I stuck in fastboot mode and i can't restart it. Is there anyway to enter flashmode from fastboot? I searched it but i can't find.
Naisamui99 said:
Actually, I've done like this before. But I stuck in fastboot mode and i can't restart it. Is there anyway to enter flashmode from fastboot? I searched it but i can't find.
Click to expand...
Click to collapse
do a reset again...vol plus + power button.... and then try
Dark Wraith said:
do a reset again...vol plus + power button.... and then try
Click to expand...
Click to collapse
That way give me enter in fastboot mode (Blue LED) :crying:
Naisamui99 said:
That way give me enter in fastboot mode (Blue LED) :crying:
Click to expand...
Click to collapse
search in xda for ion...for xperia s buttons might be different
Dark Wraith said:
search in xda for ion...for xperia s buttons might be different
Click to expand...
Click to collapse
I know how to enter Flash mode in Xperia Ion but, i can't reach that mode.
Naisamui99 said:
I know how to enter Flash mode in Xperia Ion but, i can't reach that mode.
Click to expand...
Click to collapse
Ok one by one.. Tell me can you switch off the phone completely?
Dark Wraith said:
Ok one by one.. Tell me can you switch off the phone completely?
Click to expand...
Click to collapse
Yes! because i've tried for 2 ways. The first way; Let its battery die because of bootloop. And the second is use the hard reset and let the battery die.
Hey guys I recently updated from FXP 320 to 323 and my device is Not TURNING ONN, It just gives a heptic feed back (vibrate) and sometime it doesnt even vibrate when I press and hold power button.. Just LED blicks 3 times in RED colour when I try to power onn device..
When I connect the charger the LED turns RED and it remains red even if I charger it for 3 hours or more. When I connect in FLASHBOOT or FASTBOOT MODE THE LED SHOWS RED and the pc doesnt detedt my device. What to do now? Is my device soft bricked or hard bricked? Is there any way to bring it back to life? Plz someone help me.
It's okay, it's just soft brick. Try to re-flash bro
Vroyaloko said:
It's okay, it's just soft brick. Try to re-flash bro
Click to expand...
Click to collapse
but how bhai? When I connect my device to PC, it doesnt detect
syedafzal.shah said:
but how bhai? When I connect my device to PC, it doesnt detect
Click to expand...
Click to collapse
Maybe the kernel is not compatible with the rom. Have you tried to change the kernel with fastboot? I had the same probleb with an xpreria mini and sola but after 6-7 tries it worked on fastboot, and then with the cwm i flashed via sd card the new rom.
syedafzal.shah said:
but how bhai? When I connect my device to PC, it doesnt detect
Click to expand...
Click to collapse
just go to flashtool folder the click on the drivers and open the program then tick flashmode and fastboot and click install wait till the driver installation finishes then connect your phone to pc..
Sent from my C1905 using Tapatalk 4
alexiskap said:
Maybe the kernel is not compatible with the rom. Have you tried to change the kernel with fastboot? I had the same probleb with an xpreria mini and sola but after 6-7 tries it worked on fastboot, and then with the cwm i flashed via sd card the new rom.
Click to expand...
Click to collapse
ok I will try that.
haresh311999 said:
just go to flashtool folder the click on the drivers and open the program then tick flashmode and fastboot and click install wait till the driver installation finishes then connect your phone to pc..
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
ok. I will try this and get back to you as soon as I can
If you look at the fxp change log, they've integrated the latest Sony kernel.
Sent from my C1905 using XDA Free mobile app
syedafzal.shah said:
Hey guys I recently updated from FXP 320 to 323 and my device is Not TURNING ONN, It just gives a heptic feed back (vibrate) and sometime it doesnt even vibrate when I press and hold power button.. Just LED blicks 3 times in RED colour when I try to power onn device..
When I connect the charger the LED turns RED and it remains red even if I charger it for 3 hours or more. When I connect in FLASHBOOT or FASTBOOT MODE THE LED SHOWS RED and the pc doesnt detedt my device. What to do now? Is my device soft bricked or hard bricked? Is there any way to bring it back to life? Plz someone help me.
Click to expand...
Click to collapse
it really sound like a hard bricked to mee
if u can't enter fastboot or flashmode then there's nothing u can do
now the way is to take it to a sony service centre to repair it
you need to boot repair using flashing toolbox
i heard riff box will support xperia m from july.....
anyway best of luck:good:
ManzzaShahi said:
it really sound like a hard bricked to mee
if u can't enter fastboot or flashmode then there's nothing u can do
now the way is to take it to a sony service centre to repair it
you need to boot repair using flashing toolbox
i heard riff box will support xperia m from july.....
anyway best of luck:good:
Click to expand...
Click to collapse
No, Its not hard bricked if it was hard bricked It won't Vibrate also.
Sent from my C1905 using Tapatalk 4
haresh311999 said:
No, Its not hard bricked if it was hard bricked It won't Vibrate also.
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
he can't enter fastboot mode as well as flashmode
and when he connects led turns red all time
if phone is alright then led gets green when battery is full
his device is not fully dead but cannot be recovered by using a usb cable or a flashtool which can be said as a hard bricked
the only way is to repair boot using flashing toolbox which can be done only in sony repair centre..
u can try this and report..
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my C1905 using Tapatalk 4
nice thread
but my device is working great so i don't need to try that
so let the op tries the tricks and share what he gets in result :good::good:
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?
haresh311999 said:
u can try this and report..
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?
ManzzaShahi said:
nice thread
but my device is working great so i don't need to try that
so let the op tries the tricks and share what he gets in result :good::good:
Click to expand...
Click to collapse
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?
and when i connect my device using volume down button, the led blinks in red and green colour just for a second and it goes off
syedafzal.shah said:
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?
Click to expand...
Click to collapse
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
---------- Post added at 06:28 PM ---------- Previous post was at 06:21 PM ----------
syedafzal.shah said:
and when i connect my device using volume down button, the led blinks in red and green colour just for a second and it goes off
Click to expand...
Click to collapse
if led blinks green and off then you are in flashmode
so first make sure flashtool is running and your firmware is ready
press flash button in flashtool and flashtool will start preparing the files
when flashtool will say connect your device
then that time you hold volume down button and connect to pc
it will detect and start to flash
:laugh::laugh:
ManzzaShahi said:
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
Click to expand...
Click to collapse
How to flash full firmware? can I install fxp323 using flashtool? how?
ManzzaShahi said:
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
---------- Post added at 06:28 PM ---------- Previous post was at 06:21 PM ----------
if led blinks green and off then you are in flashmode
so first make sure flashtool is running and your firmware is ready
press flash button in flashtool and flashtool will start preparing the files
when flashtool will say connect your device
then that time you hold volume down button and connect to pc
it will detect and start to flash
:laugh::laugh:
Click to expand...
Click to collapse
Where should i paste FXP 323?