Every Rom with i have done a Factory reset. Does not Load anything after restart. When I done a fresh Install of the Rom I got a Bootloop. I tried it with Both Omni Rom Versions. I have TWRP 2.7 for KK.
RabbidZ said:
Every Rom with i have done a Factory reset. Does not Load anything after restart. When I done a fresh Install of the Rom I got a Bootloop. I tried it with Both Omni Rom Versions. I have TWRP 2.7 for KK.
Click to expand...
Click to collapse
Flash the update_aosp.zip from TWRP thread.
Gesendet von meinem P6-U06
Related
Hi,
I did a full firmware install on my i747m (bell), I reinstalled TWRP and installed a rom on there. I tried to boot and it stayed only on the samsung screen, tried to install the rom again but still the same thing, installed another rom but same thing. Any idea on how I can fix this?
arv.singh said:
Hi,
I did a full firmware install on my i747m (bell), I reinstalled TWRP and installed a rom on there. I tried to boot and it stayed only on the samsung screen, tried to install the rom again but still the same thing, installed another rom but same thing. Any idea on how I can fix this?
Click to expand...
Click to collapse
What firmware was it you installed and what Android version was it on prior to this installation? Have you tried booting into recovery and doing a hard wipe/reset?
Larry2999 said:
What firmware was it you installed and what Android version was it on prior to this installation? Have you tried booting into recovery and doing a hard wipe/reset?
Click to expand...
Click to collapse
I was using 4.4 I went on sammobile.com and got the firmware for my model. I did a hard wipe and reset via odin. I'm trying it once more, will let know if something has changed.
I redid everything, it works again!
Hey guys I just wanted to know if I can install MIUI v5 directly when I'm on B506 or must I downgrade first before? And also can I install it with TWRP or need I CWM?
Gesendet von meinem P6-U06
Get back to a stock Jellybean ROM, like B125. Then get CWM. In CWM, factory reset, flash MIUI, wipe dalvik cache. If you're stuck on Miui logo, reboot into stock recovery (make sure there's no dload folder, then hold vol+, vol- and power) and factory reset again.
Sent from my P6-U06 using Tapatalk
lootjelo said:
Get back to a stock Jellybean ROM, like B125. Then get CWM. In CWM, factory reset, flash MIUI, wipe dalvik cache. If you're stuck on Miui logo, reboot into stock recovery (make sure there's no dload folder, then hold vol+, vol- and power) and factory reset again.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Does it work with TWRP and B132?
RabbidZ said:
Does it work with TWRP and B132?
Click to expand...
Click to collapse
I tried a TWRP version of MIUI (husen4u posted it in the MIUI v5 thread), but it's not the latest version now anymore, and I couldn't get it to boot. It could just be something I did wrong, though. I don't know about B132: MIUI has shown some instability (Android OS batterydrain) with certain firmwares, so I think B125 with CWM is the way to go.
Sent from my P6-U06 using Tapatalk
Hey guys. I have a problem installing any AOSP based roms after upgrading to stock KK.
Here's what i did previously:
1. Upgrade KK using flashtool CSE method
2. Root using towelroot (tried using framaroot before but it was failed)
3. unlock bootloader using freegee, mako unlock and install TWRP
4. flash twrp multirom
5. made a nandroid backup
6. wipe data, cache, etc
7. install carbon rom, pa gapps
8. reboot
now my device stuck on boot animation. i've waited for an hour, nothing happened.. I've tried carbon, omni, CM, 4.4.4 and 4.4.2 version, all failed. However, i was able to install artmod without problem.
i wonder what went wrong? is it something to do with partition? can anyone help me please?
Thanks.
grunch21 said:
Hey guys. I have a problem installing any AOSP based roms after upgrading to stock KK.
Here's what i did previously:
1. Upgrade KK using flashtool CSE method
2. Root using towelroot (tried using framaroot before but it was failed)
3. unlock bootloader using freegee, mako unlock and install TWRP
4. flash twrp multirom
5. made a nandroid backup
6. wipe data, cache, etc
7. install carbon rom, pa gapps
8. reboot
now my device stuck on boot animation. i've waited for an hour, nothing happened.. I've tried carbon, omni, CM, 4.4.4 and 4.4.2 version, all failed. However, i was able to install artmod without problem.
i wonder what went wrong? is it something to do with partition? can anyone help me please?
Thanks.
Click to expand...
Click to collapse
Boot into Recovery > Factory Reset > Wipe Cache > Wipe Dalvik > Flash Rom > Flash Gapps > Reboot System
erkasmoter said:
Boot into Recovery > Factory Reset > Wipe Cache > Wipe Dalvik > Flash Rom > Flash Gapps > Reboot System
Click to expand...
Click to collapse
Well, i think i know the standard procedure, having flashed roms countless times before. But thanks anyway.
Just an update, i tried to flash gproj rom. It was successfully installed, but i got no data and wifi working. So probably it's modem problem. Hopefully someone can help me here..
Just try with a different recovery, like Philz touch.
nlooooo said:
Just try with a different recovery, like Philz touch.
Click to expand...
Click to collapse
I've tried that too. Phillz's, CWM, all don't work. Still stuck on boot ani.
grunch21 said:
I've tried that too. Phillz's, CWM, all don't work. Still stuck on boot ani.
Click to expand...
Click to collapse
That happens to me too
In my case, GPROJ works fine but GEEB get stuck at the logo only. Maybe you are only using GEEB ROM, or vice versa.
For example SLIM LP v0.6 uses GPROJ and v0.7 uses GEEB. v0.6 works fine for me and v0.7 doesn't work. Same with BLISSPOP v3.4(gproj) and v4(geeb).
I wonder if there's a way to use GEEB.
I have a E970.
hi. i was using RepacK_emui_3.0_b709_by_OXALIS_P6-U06_v03 this version of this rom. today when i wanted to flash this version P6-U06B709_modBy_OXALIS_v08_InterEDITION, before flashing i accidentally wipe everything in twrp( system, cache, dalvike_cache, internal storage ... everything). then i hadn't any os installed. when i flash P6-U06B709_modBy_OXALIS_v08_InterEDITION, i'm stock in huawie ascend boot loop logo and nothing i can do. i can acces to TWRP i flashed recovey.img via fast boot but nothing happen and i disconnected it. i use dlload\update.app and combo method and still nothing happen and i'm going to TWRP.
PLEASE HELP, what should i do?
you have to flash boot.img and recovery.img of destinated firmware for flashing through force update (3button method)..
for custom roms you need the twrp recovery..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
you have to flash boot.img and recovery.img of destinated firmware for flashing through force update (3button method)..
for custom roms you need the twrp recovery..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
thanks, i falashed cyanogenmod and it fixed the boot loop problem
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
himon said:
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
Click to expand...
Click to collapse
Hi there, I think you need just to do a factory reset.
When you flash a custom Rom over the stock Rom, the data partition remains encrypted, so it won't boot up, and you encounter a boot loop, after a factory reset the data partition will be formated and from now on you can flash custom Roms without any problem. (But if you would like to shift between stable and beta custom Roms, Most of the times you need to do a factory reset again.)
Gesendet von meinem Redmi Note 9S mit Tapatalk
After flashing twrp I wiped my data.then i reboot to system when next time I go to recovery there was no twrp.i tried 2 times ...
himon said:
After flashing twrp I wiped my data.then i reboot to system when next time I go to recovery there was no twrp.i tried 2 times ...
Click to expand...
Click to collapse
You need to do factory reset. Not wiping. Just select factory reset option , then type yes. And swipe to perform.
Gesendet von meinem Redmi Note 9S mit Tapatalk
himon said:
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
Click to expand...
Click to collapse
flash magisk to solve your issue
You need to boot to recovery after flashing twrp. You can do this by pressing volume up button along with power button. If you wiped the data when you are in twrp recovery, then go to the reboot tab in twrp recovery and reboot once again to recovery and after rebooting to recovery, boot to system. If you boot to system without booting to recovery, the stock recovery will be restored.