hi. i was using RepacK_emui_3.0_b709_by_OXALIS_P6-U06_v03 this version of this rom. today when i wanted to flash this version P6-U06B709_modBy_OXALIS_v08_InterEDITION, before flashing i accidentally wipe everything in twrp( system, cache, dalvike_cache, internal storage ... everything). then i hadn't any os installed. when i flash P6-U06B709_modBy_OXALIS_v08_InterEDITION, i'm stock in huawie ascend boot loop logo and nothing i can do. i can acces to TWRP i flashed recovey.img via fast boot but nothing happen and i disconnected it. i use dlload\update.app and combo method and still nothing happen and i'm going to TWRP.
PLEASE HELP, what should i do?
you have to flash boot.img and recovery.img of destinated firmware for flashing through force update (3button method)..
for custom roms you need the twrp recovery..
Gesendet von meinem Mate S CRR-L09 B303
blueIBI said:
you have to flash boot.img and recovery.img of destinated firmware for flashing through force update (3button method)..
for custom roms you need the twrp recovery..
Gesendet von meinem Mate S CRR-L09 B303
Click to expand...
Click to collapse
thanks, i falashed cyanogenmod and it fixed the boot loop problem
Related
Hey guys I just wanted to know if I can install MIUI v5 directly when I'm on B506 or must I downgrade first before? And also can I install it with TWRP or need I CWM?
Gesendet von meinem P6-U06
Get back to a stock Jellybean ROM, like B125. Then get CWM. In CWM, factory reset, flash MIUI, wipe dalvik cache. If you're stuck on Miui logo, reboot into stock recovery (make sure there's no dload folder, then hold vol+, vol- and power) and factory reset again.
Sent from my P6-U06 using Tapatalk
lootjelo said:
Get back to a stock Jellybean ROM, like B125. Then get CWM. In CWM, factory reset, flash MIUI, wipe dalvik cache. If you're stuck on Miui logo, reboot into stock recovery (make sure there's no dload folder, then hold vol+, vol- and power) and factory reset again.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Does it work with TWRP and B132?
RabbidZ said:
Does it work with TWRP and B132?
Click to expand...
Click to collapse
I tried a TWRP version of MIUI (husen4u posted it in the MIUI v5 thread), but it's not the latest version now anymore, and I couldn't get it to boot. It could just be something I did wrong, though. I don't know about B132: MIUI has shown some instability (Android OS batterydrain) with certain firmwares, so I think B125 with CWM is the way to go.
Sent from my P6-U06 using Tapatalk
Every Rom with i have done a Factory reset. Does not Load anything after restart. When I done a fresh Install of the Rom I got a Bootloop. I tried it with Both Omni Rom Versions. I have TWRP 2.7 for KK.
RabbidZ said:
Every Rom with i have done a Factory reset. Does not Load anything after restart. When I done a fresh Install of the Rom I got a Bootloop. I tried it with Both Omni Rom Versions. I have TWRP 2.7 for KK.
Click to expand...
Click to collapse
Flash the update_aosp.zip from TWRP thread.
Gesendet von meinem P6-U06
Hi, I tried to flash new firmware, so I placed UPDATE.APP in dload folder on sdcard, reboot in TWRP, wiped everything except ext_sd (because phone wouldn't update from update menu in settings menu),and tried to enter bootloader mode,but phone stucks at HUAWEI logo... tried to boot to bootloader from TWRP,same thing happens... like bootloader is corupted,it won't start... all I have now is TWRP... is there some way to start bootloader and to flash firmware?
you have to choose a custom rom (they can be installed/flashed by twrp)..
original firmware can only be installed by stock recovery..
Gesendet von HUAWEI Ascend P7-L10 B602
Try to install custom Rom with TWRP or if you can now revert to stock recovery then you could install official frimware. Official frimware you install only with stock recovery.
Sent from my HUAWEI P6-U06 using XDA app
I have installed custom ROM in meantime, now I am trying to revert to stock recovery, in order to get bootloader and to get back to stock fw... I have problems with fastboot- it won't see device, while adb sees it
I have sucedeed,driver was problem, it was installed correctly, but I had to reinstall it to make everything work... tnx
smfilip said:
Hi, I tried to flash new firmware, so I placed UPDATE.APP in dload folder on sdcard, reboot in TWRP, wiped everything except ext_sd (because phone wouldn't update from update menu in settings menu),and tried to enter bootloader mode,but phone stucks at HUAWEI logo... tried to boot to bootloader from TWRP,same thing happens... like bootloader is corupted,it won't start... all I have now is TWRP... is there some way to start bootloader and to flash firmware?
Click to expand...
Click to collapse
Eish! Big mistake. You were supposed to have first flashed stock recovery before attempting to install UPDATE.APP, so now what you need to do is to get one of the ROMS in a zip form and place it in your SD card. In TWRP advance mount your usb and copy the ROM zip to your SD card, then follow the install procedure.
Hello
i've just installed the twrp recovery on my lg g4 (after unlock the bootloader of course)
and when i try to boot in recovery mode it doesnt work (it shows me an android logo with an exclamation mark)
plz help me :S
thanks
It did not install properly. Same happened to me. Try
fastboot erase recovery
fastboot flash recovery twrp.img
Then try to boot to recovery using twrp manager app
jkoljo said:
It did not install properly. Same happened to me. Try
fastboot erase recovery
fastboot flash recovery twrp.img
Then try to boot to recovery using twrp manager app
Click to expand...
Click to collapse
thanks for your comment!
but i still have this problem...
jkoljo said:
It did not install properly. Same happened to me. Try
fastboot erase recovery
fastboot flash recovery twrp.img
Then try to boot to recovery using twrp manager app
Click to expand...
Click to collapse
After you have installed TWRP via adb you must boot (or stay there) into revocery and falsh the twrp-xxxx.img as "revocery" (buton down right to change from image to recovery).
hannsheinz said:
After you have installed TWRP via adb you must boot (or stay there) into revocery and falsh the twrp-xxxx.img as "revocery" (buton down right to change from image to recovery).
Click to expand...
Click to collapse
thanks man but i cant boot into recovery... this is the problem... Instead of boot into recovery, it shows me a android logo with exclamation mark..
daniel1803 said:
thanks man but i cant boot into recovery... this is the problem... Instead of boot into recovery, it shows me a android logo with exclamation mark..
Click to expand...
Click to collapse
Try this:
adb reboot bootloader
fastboot.exe flash recovery twrp-xxxx.img
fastboot.exe boot twrp-xxxx.img (same filename as above)
Then flash the same twrp-xxx.img file via "install"
After this you can direct boot into revocery with apps like quickboot, or via Vol-Down, Power-On, or direkt via reboot meneu if you use G4 Tweak Box.
If you are on 6.0 the recovery will never boot up. But don't worry, all you need to do is just download kernel package like SimpleGX, from this package copy the boot.img, then flash it via fastboot. After that let the phone boot up, reboot it to bootloader again and flash twrp.img. If you did it properly the twrp will boot up. REMEMBER to flash full kernel package otherwise you can have problems with your device.
Adam Myczkowski said:
If you are on 6.0 the recovery will never boot up. But don't worry, all you need to do is just download kernel package like SimpleGX, from this package copy the boot.img, then flash it via fastboot. After that let the phone boot up, reboot it to bootloader again and flash twrp.img. If you did it properly the twrp will boot up. REMEMBER to flash full kernel package otherwise you can have problems with your device.
Click to expand...
Click to collapse
is it save to flash the SimpleGX kernel without the included modules in the zip file?
because i only manged to flash twrp for h811 on my h815 with v20d and unlocked bootloader... i am confused
the-erazer said:
is it save to flash the SimpleGX kernel without the included modules in the zip file?
because i only manged to flash twrp for h811 on my h815 with v20d and unlocked bootloader... i am confused
Click to expand...
Click to collapse
Never flash recovery for H811 on H815, there is reason why they are different.. You could have bricked your device. Yes flashing this boot.img is completely safe as long as you flash full package later, otherwise you might have problems with software. I've done so many times without any issue, anyway it's not a softbrick, you always reflash the firmware however be aware of that if you do it wrong and get your phone bricked without access to custom recovery there is no way to recovery your data. My G4 is dead but this is caused by the well know bootloop issue (hardware fail).
Adam Myczkowski said:
Never flash recovery for H811 on H815, there is reason why they are different.. You could have bricked your device. Yes flashing this boot.img is completely safe as long as you flash full package later, otherwise you might have problems with software. I've done so many times without any issue, anyway it's not a softbrick, you always reflash the firmware however be aware of that if you do it wrong and get your phone bricked without access to custom recovery there is no way to recovery your data. My G4 is dead but this is caused by the well know bootloop issue (hardware fail).
Click to expand...
Click to collapse
Thanks for the quick answer... I got a replacement and it ships with v20d twrp for h811 was the only solution to get root... Now i have seen your post... Will try it later... I hope it works
Do you know the reason why we have to flash the kernel? Some poeple can flash twrp without...
edit: i have flashed the kernel but flashing twrp dont want to flash...
the result of fastboot is positive but if i want to boot in recovery the screen stays black and then the phone boots up normal to os...
woult it help to kdz the phone to lolipop?
Gesendet von meinem LG-H815 mit Tapatalk
Adam Myczkowski said:
If you are on 6.0 the recovery will never boot up. But don't worry, all you need to do is just download kernel package like SimpleGX, from this package copy the boot.img, then flash it via fastboot. After that let the phone boot up, reboot it to bootloader again and flash twrp.img. If you did it properly the twrp will boot up. REMEMBER to flash full kernel package otherwise you can have problems with your device.
Click to expand...
Click to collapse
the-erazer said:
Thanks for the quick answer... I got a replacement and it ships with v20d twrp for h811 was the only solution to get root... Now i have seen your post... Will try it later... I hope it works
Do you know the reason why we have to flash the kernel? Some poeple can flash twrp without...
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
Install Twrp Manager from the Play Store and then install Twrp 2.8.7.0 from it.
It's working fine on my H815 v20d
Sent from my LG G4
welder73 said:
Install Twrp Manager from the Play Store and then install Twrp 2.8.7.0 from it.
It's working fine on my H815 v20d
Sent from my LG G4
Click to expand...
Click to collapse
I have no idea how did you manage to install TWRP recovery on official 6.0 firmware since TWRP manager requires root and to root android 6.0 you have to have modified boot image...
the-erazer said:
Thanks for the quick answer... I got a replacement and it ships with v20d twrp for h811 was the only solution to get root... Now i have seen your post... Will try it later... I hope it works
Do you know the reason why we have to flash the kernel? Some poeple can flash twrp without...
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
As I mentioned above in android 6.0 google have modified it as the stock kernel does not allow to use unsigned stuff even though your bootloader is unlocked. So only way to root/install recovery on android 6.0 smartphones is to flash modified boot.img that allows to load unsigned things. If you flash recovery without changing stock kernel you'll not brick your device but the recovery will never open, but flashing superSU might brick your device, Autoprimes flashable zips include modified boot.img I suppose.
Adam Myczkowski said:
I have no idea how did you manage to install TWRP recovery on official 6.0 firmware since TWRP manager requires root and to root android 6.0 you have to have modified boot image...
As I mentioned above in android 6.0 google have modified it as the stock kernel does not allow to use unsigned stuff even though your bootloader is unlocked. So only way to root/install recovery on android 6.0 smartphones is to flash modified boot.img that allows to load unsigned things. If you flash recovery without changing stock kernel you'll not brick your device but the recovery will never open, but flashing superSU might brick your device, Autoprimes flashable zips include modified boot.img I suppose.
Click to expand...
Click to collapse
i have no more idea what to do... i have flashed the kernel... and then recovery but when i want to enter recovery nothing happens it doesnt load. after some seconds the phone boots up normal.
before that i have tried twrp manager but the app crashes every time i want to select the recovery to install.
flashify is same as flashing over fastboot.
what is the difference between the 2 versions of twrp? h811 got another kernel than h815 but why can i load this one but the right for h815 not?
the-erazer said:
i have no more idea what to do... i have flashed the kernel... and then recovery but when i want to enter recovery nothing happens it doesnt load. after some seconds the phone boots up normal.
before that i have tried twrp manager but the app crashes every time i want to select the recovery to install.
flashify is same as flashing over fastboot.
what is the difference between the 2 versions of twrp? h811 got another kernel than h815 but why can i load this one but the right for h815 not?
Click to expand...
Click to collapse
I have no idea honestly, try to reflash the firmware. Recovery doesn't load only if you don't flash boot.img properly.
Adam Myczkowski said:
I have no idea how did you manage to install TWRP recovery on official 6.0 firmware since TWRP manager requires root and to root android 6.0 you have to have modified boot image...
As I mentioned above in android 6.0 google have modified it as the stock kernel does not allow to use unsigned stuff even though your bootloader is unlocked. So only way to root/install recovery on android 6.0 smartphones is to flash modified boot.img that allows to load unsigned things. If you flash recovery without changing stock kernel you'll not brick your device but the recovery will never open, but flashing superSU might brick your device, Autoprimes flashable zips include modified boot.img I suppose.
Click to expand...
Click to collapse
Sorry,I thought he already have root.
Btw,you can't root H815 on MM without unlocking the bootloader...
Sent from my LG G4
the-erazer said:
i have no more idea what to do... i have flashed the kernel... and then recovery but when i want to enter recovery nothing happens it doesnt load. after some seconds the phone boots up normal.
before that i have tried twrp manager but the app crashes every time i want to select the recovery to install.
flashify is same as flashing over fastboot.
what is the difference between the 2 versions of twrp? h811 got another kernel than h815 but why can i load this one but the right for h815 not?
Click to expand...
Click to collapse
just for information i have tested to kdz back to lollipop v10b... downgrade was really easy using lgup but the result was twrp doesnt work... same as marshmallow... btw github had a bug ticket for h811 there was the same only vice versa...
daniel1803 said:
Hello
i've just installed the twrp recovery on my lg g4 (after unlock the bootloader of course)
and when i try to boot in recovery mode it doesnt work (it shows me an android logo with an exclamation mark)
plz help me :S
thanks
Click to expand...
Click to collapse
how do u unlock the bootloader on a LG G4 H811 ver 20i
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
himon said:
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
Click to expand...
Click to collapse
Hi there, I think you need just to do a factory reset.
When you flash a custom Rom over the stock Rom, the data partition remains encrypted, so it won't boot up, and you encounter a boot loop, after a factory reset the data partition will be formated and from now on you can flash custom Roms without any problem. (But if you would like to shift between stable and beta custom Roms, Most of the times you need to do a factory reset again.)
Gesendet von meinem Redmi Note 9S mit Tapatalk
After flashing twrp I wiped my data.then i reboot to system when next time I go to recovery there was no twrp.i tried 2 times ...
himon said:
After flashing twrp I wiped my data.then i reboot to system when next time I go to recovery there was no twrp.i tried 2 times ...
Click to expand...
Click to collapse
You need to do factory reset. Not wiping. Just select factory reset option , then type yes. And swipe to perform.
Gesendet von meinem Redmi Note 9S mit Tapatalk
himon said:
I unlocked my bootloader and installed twrp but, after reboot my phone rebooted to stock recovery...what can I do..please help.How can I get twrp permanently on my #redmi note 8 . thanks in advance.
# I am using miui rom
Click to expand...
Click to collapse
flash magisk to solve your issue
You need to boot to recovery after flashing twrp. You can do this by pressing volume up button along with power button. If you wiped the data when you are in twrp recovery, then go to the reboot tab in twrp recovery and reboot once again to recovery and after rebooting to recovery, boot to system. If you boot to system without booting to recovery, the stock recovery will be restored.