Hi Mates! After A Very-Very Long Time I Am Back On XDA. This Time I'm Using A Xolo Q1000 Which Is A Rebrand Of Cherry Mobile OHD 2.0 & Symphony w140 :good: So, Here The Stock Collection For These Devices. Enjoy Pals!
.
.
.
IMPORTANT NOTICE: I Am Not Responsible For Bricked Devices, Dead SDCards And Other Hazards. Try @ Your Own Risk..!
Stock Bootlogos:
Xolo Q1000: http://is.gd/LygEwk
Cherry Mobile OHD 2.0: http://is.gd/ZYPmGD
Symphony w140: http://is.gd/lmWTdS
Tutorial: Flash Via CWM/TWRP.
Stock Recovery:
For Build 49 Users:
Stock Recovery_49 --> http://goo.gl/f6FxGO
For Build 7 Users:
Stock Recovery_7 --> http://goo.gl/xEYc1u
NOTE: If You're Confused Which One To Use On Your Xolo Q1000 & Symphony w140 Then Try Both Of These. Anyone Will Definately Work.
TUTORIAL:
1. Download MobileUncle Tool --> http://goo.gl/wYgPbu
2. Download Suitable Recovery From Above.
3. Rename It To recovery.img
4. Put It On The Root Of The SDCard.
5. Open MobileUncle Tool.
6. Tap On Recovery Update.
7. Navigate To The recovery.img
8. Select The Recovery.
8. Then Reboot To Recovery
9. Done!
Stock ROMs:
Xolo Q1000: www.d-h.st/M92
Cherry Mobile OHD 2.0 Build 49: http://is.gd/U6oQKN
Cherry Mobile OHD 2.0 Build 7: Wiil Be Posted Soon :highfive:
Symphony w140: http://is.gd/oHSwsR [Needs SignUp]
Flash Via SP Flash Tools..!!
Please Hit Thanks If I Helped You All :victory:
Reserved
Cherry Mobile OHD 2.0 Build 49: file is corrupt
Question about CM Omega 2.0
sir do you have Stock rom for build18 >?
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
robin.kang63 said:
Cherry Mobile OHD 2.0 Build 49: file is corrupt
Click to expand...
Click to collapse
you should try extracting it with Winrar
because its packed with it.
My microusb port not working..Any way to flash xolo rom ???
Related
Hellow Friends
So many peoples have problem with reading gujarati, panjabi, etc., language in redmi 1s in stock or custom ROM.
So here's the easiest way for that.
I created a flashable zip file. you just need to flash it for solving your problem or for install these language in your mobile
Guide 1.At the first root your redmi 1s
2.Then install any recovery
3.then download the indian font.zip file from attachment
4.then reboot in to recovery
5.then just flash file and enjoy :victory: :highfive:
These zip contain below languagesGujarati
Punjabi
Sindhi
Oriy
Nepali
Marathi
Kashmiri
Assamese
Telugu
Tamil
Malayal
Kannad
Hindi
Bengali
Tested On below ROMsStock
Cm 11
Carbon
Mokee
Paranoid
It may also work on other devices but not sure so try at your own risk
Special Thanks ToXda
Xda Members
Xda Developers
+1000 for Malayalam man
Edit:- But doesn't belong to android development but in General section or themes and apps section !
@zelendel Move it please
Any solution for whyred on masik
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Change UBOOT to match device build (included the the archive)
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- Busybox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @Hyperion70 (Original thread)
- @Sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- http://d-h.st/KNvT
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- http://d-h.st/4g9q
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Looking forward for ur new project sir
good job sir remzej, keep up the good work
Many Thanks Sir remzej, Hoping for a Kitkat Colossus... :fingers-crossed:
Thanks you so much sir Rem zej
thanks sir for the great and hard work on our device
Nice work bro, thanks for making good ROM for our devices, downloading it.
Sir Remz,
do you have a mirror for this link? like mediafire? i can't download it here, thanks a lot... more power
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
---------- Post added at 09:36 AM ---------- Previous post was at 09:35 AM ----------
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
Thank you Sir Rem Zej...!!!
I am flashing it now and will keep u updated with any lag or issues...:good:
Super Fine Works...!!!
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
---------- Post added at 05:56 PM ---------- Previous post was at 05:23 PM ----------
Sir can i flash PurePerformance X v1.4 to this rom?
Please guide
Till now known issues...
Proximity sensor malfunctions during calls...
HELP
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Bro flash the Stock JB firmware using sp tools...then it will be fine just like before..
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Can you give me the link you downloaded and flashed to your phone? I think you flash the bq Aquaris 5 HD firmware.
abhipanthi said:
Proximity sensor malfunctions during calls...
Click to expand...
Click to collapse
My proximity sensors works well during calls bro.
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
TheCardinal said:
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
Click to expand...
Click to collapse
Be sure to backup your previous IMEI/NVRAM so you can restore it using MTK Droid Tools.
abhipanthi said:
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
Click to expand...
Click to collapse
Please sir, I get an error message when flashing the Unofficial AOSP via so flastool, after loading scatter file and clicking on firmware upgrade, the error says " please make sure all necessary image file are checked to be downnloaded for "firmware upgrade"", please sir how did you pass through firmware upgrade when all files are not selected in scatter file?
Almost after an year of black patch problem in playstore and various other apps are fixed... Its a delight to use your app.. Thanks a lot.
Hi everyone
This is the TWRP Recovery for our beloved Symphony Xplorer E76
TWRP Stands For Team Win Recovery Project
And this is the TWRP 2.4.4.0
TWRP
-Nice UI
-Multi Zip Flashing
-Themes Supported
-And Much More
Cridt: TWRP Team
Nayeem Hossaain (Me)
Mj Munna Khan
& Mousumi
Twrp Link:
http://www.mediafire.com/download/j51zlyuvgtm523l/TWRP+Recovery+For+Symphony+Xplorer+E76.zip
For any problem ask
https://www.facebook.com/profile.php?id=100008777829304&fref=pb&refid=18
https://www.facebook.com/groups/1175814892445924?view=group&refid=18
Ahhhhh.... how to install it?
TheRootPrince said:
Ahhhhh.... how to install it?
Click to expand...
Click to collapse
flash it via mobile uncle tool or recovery tools
This twrp have something problems
Theme not support
Intel storage not mount
Permission not fix
So bro please update twrp and fix all problem
Plzz fast.....give him.....
Lenovo A7000 Marshmallow Latest STOCK FIRMWARE [Android 6.0] [VIBE UI 3.1]
Version : A7000-a_S228_160621_ROW Firmware(Full)
Flash via Sp flash tool.
Rom Download Link: Click Here (Link Fixed Sept 2021)
(SP Flash Tool and Driver included in rom package)
Instructions for flashing ROM with SP Flash tool. Click here
creator: Group R&D Lenovo
Latest TWRP recovery and root for Lenovo a7000 marshmallow: click here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER I NOR XDA WILL BE RESPONSIBLE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
i have problem with the camera anyone have this issue or just me the camera always rotate and the picture too is this from something i did or what
Already updated mine, so far so good ?
sonnyboipunx said:
Already updated mine, so far so good
Click to expand...
Click to collapse
Did you updated using this rom this link here or what or you use another ROM from other site thanks
PrashantRana said:
Lenovo A7000 Marshmallow STOCK FIRMWARE [Android 6.0]
[VIBE UI 3.1]
Flash via Sp flash tools( da with all checksums).
version :A7000-a_S223_160405_ROW.
DOWNLOAD LINK : click here
creater : Group R&D lenovo
Latest TWRP recovery and root for lenovo a7000 marshmallow : click here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
Click to expand...
Click to collapse
I think it's the same as this one because there's only 1 stock 6.0 as of now,
ehabreda.y said:
Did you updated using this rom this link here or what or you use another ROM from other site thanks
Click to expand...
Click to collapse
ehabreda.y said:
Did you updated using this rom this link here or what or you use another ROM from other site thanks
Click to expand...
Click to collapse
This is the stock Android 6.0.
From lenovo Russia forum
PrashantRana said:
Lenovo A7000 Marshmallow STOCK FIRMWARE [Android 6.0]
[VIBE UI 3.1]
Flash via Sp flash tools( da with all checksums).
version :A7000-a_S223_160405_ROW.
Download link : click here
Mirror link :click here
Latest SP-Flashtool:click here
creater : Group R&D lenovo
Mirror link by:Aryan Kedare
Latest TWRP recovery and root for lenovo a7000 marshmallow : click here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
Click to expand...
Click to collapse
Brother what is the update about bugs...?
Can we install cracked gameloft games now???
Is the touch bug fixed....?
pls list all the known and fixed bugs ...
PrashantRana said:
This is the stock Android 6.0.
From lenovo Russia forum
Click to expand...
Click to collapse
. It turn out that I have rotate problems and it appears in the camera because it's self rotated I have sensor problem what should I do to fix it
ehabreda.y said:
. It turn out that I have rotate problems and it appears in the camera because it's self rotated I have sensor problem what should I do to fix it
Click to expand...
Click to collapse
What type of camera problem you are getting give a sample of camera image.or explain.( from which camera you are getting problem it is front camera or back camera.)
PrashantRana said:
What type of camera problem you are getting give a sample of camera image.or explain.( from which camera you are getting problem it is front camera or back camera.)
Click to expand...
Click to collapse
. It is not just the camera it is the whole phone when I do rotate on the screen rotate to the side even when I holding me phone vertical and I appear in the camera because even when I do rotate off the phone work fine but the camera is not the icons and the picture showing that I am holding me phone horizontal someone say to me it is a sensor problem is that correct
Hi
I use cm12.1 and i want to upgrade MM, is there any way to flash this atock rom without pc? I dont have pc but i have twrp hehe
Pls help
I m on miui7.
How can I update to the MM?
I have twrp.
PrashantRana said:
Lenovo A7000 Marshmallow STOCK FIRMWARE [Android 6.0]
[VIBE UI 3.1]
Flash via Sp flash tools( da with all checksums).
version :A7000-a_S223_160405_ROW.
Download link : click here
Mirror link :click here
Latest SP-Flashtool:click here
creater : Group R&D lenovo
Mirror link by:Aryan Kedare
Latest TWRP recovery and root for lenovo a7000 marshmallow : click here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
Click to expand...
Click to collapse
Sir is there any way to flash stock rom 6.0 without pc? Can i flash via twrp? I dont have pc,
Pls reply
inchan13 said:
Sir is there any way to flash stock rom 6.0 without pc? Can i flash via twrp? I dont have pc,
Pls reply
Click to expand...
Click to collapse
Yes friend you can do it with stock recovery.
For that you have to flash stock recovery with the help of twrp recovery.
I will post the whole details and download link within 12 hours in this thread.
Lenovo A7000 STOCK MARSHMALLOW [Android 6.0] UPDATING WITHOUT SP FLASH TOOL
PrashantRana said:
Yes friend you can do it with stock recovery.
For that you have to flash stock recovery with the help of twrp recovery.
I will post the whole details and download link within 12 hours in this thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/development/stock-firmware-lenovo-a7000-t3205505
Can you please write a noob step by step procedure?
As of now I have ASOP A7000 rooted.
PrashantRana said:
Yes friend you can do it with stock recovery.
For that you have to flash stock recovery with the help of twrp recovery.
I will post the whole details and download link within 12 hours in this thread.
Click to expand...
Click to collapse
Thanks for your reply, i will try it right now
Flashing Stock Rom Via SP Flash Tool[Lenovo A7000]
Step by Step instructions
http://forum.xda-developers.com/android/development/flashing-stock-rom-via-sp-flash-t3364235
This is a heavier ROM than AOSP 5.0 And stock rom 5.0 of A7000. Will this rom slow down my phone?
Sent from my Lenovo A7000-a using XDA-Developers mobile app
archz2 said:
This is a heavier ROM than AOSP 5.0 And stock rom 5.0 of A7000. Will this rom slow down my phone?
Sent from my Lenovo A7000-a using XDA-Developers mobile app
Click to expand...
Click to collapse
What silly you are talking.The phone is not getting slow at all.
Marshmallow has many feature such as Doze for better battery,good ram management and many more.
You should know that motoG (2nd gen) which has only1 GB ram and 1.2 GHz quadcore processor had received marshmallow. Now you can compare yourself.
if MM will make phone slow so why lenovo released it.
Firmware Details :-
Android Version: - Android OS v6.0 (Marshmallow).
Micromax Canvas Unite 4 Plus : - Q427 plus.
Status : type :- Official
type:- ".Zip" file & Tool.
File Size :- 1.34MB
Guide To Install Firmware :-
Extract Downloaded File Zip File Via WinZip and; 7zip.
Install USB Drivers.
Now Open The SP Flash Tool & Click The Download Tab Button.
Now Click Scatter-Loading Button & Browse And Select The Extracted Firmware [scatter.txt] File Which You Have Already Downloaded.
Now Hit The Download Button.
Switch Off Your Phone & Connect Your Phone To The PC.
After The Flashing A Green Tick Will Be Appear.
Disconnect Your Phone And Make It On
.
thanks
Please create a rom for micromax canvas unite 4 plus