Develop Bugs

[STOCK][ROM][RECOVERY][LOGO] Stock Downloads For Xolo Q1000/CM OHD 2.0/Symphony w140

Hi Mates! After A Very-Very Long Time I Am Back On XDA. This Time I'm Using A Xolo Q1000 Which Is A Rebrand Of Cherry Mobile OHD 2.0 & Symphony w140 :good: So, Here The Stock Collection For These Devices. Enjoy Pals!
.
.
.
IMPORTANT NOTICE: I Am Not Responsible For Bricked Devices, Dead SDCards And Other Hazards. Try @ Your Own Risk..!
Stock Bootlogos:
Xolo Q1000: http://is.gd/LygEwk
Cherry Mobile OHD 2.0: http://is.gd/ZYPmGD
Symphony w140: http://is.gd/lmWTdS
Tutorial: Flash Via CWM/TWRP.
Stock Recovery:
For Build 49 Users:
Stock Recovery_49 --> http://goo.gl/f6FxGO
For Build 7 Users:
Stock Recovery_7 --> http://goo.gl/xEYc1u
NOTE: If You're Confused Which One To Use On Your Xolo Q1000 & Symphony w140 Then Try Both Of These. Anyone Will Definately Work.
TUTORIAL:
1. Download MobileUncle Tool --> http://goo.gl/wYgPbu
2. Download Suitable Recovery From Above.
3. Rename It To recovery.img
4. Put It On The Root Of The SDCard.
5. Open MobileUncle Tool.
6. Tap On Recovery Update.
7. Navigate To The recovery.img
8. Select The Recovery.
8. Then Reboot To Recovery
9. Done!
Stock ROMs:
Xolo Q1000: www.d-h.st/M92
Cherry Mobile OHD 2.0 Build 49: http://is.gd/U6oQKN
Cherry Mobile OHD 2.0 Build 7: Wiil Be Posted Soon :highfive:
Symphony w140: http://is.gd/oHSwsR [Needs SignUp]
Flash Via SP Flash Tools..!!
Please Hit Thanks If I Helped You All :victory:

Reserved

Cherry Mobile OHD 2.0 Build 49: file is corrupt

Question about CM Omega 2.0
sir do you have Stock rom for build18 >?
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
robin.kang63 said:
Cherry Mobile OHD 2.0 Build 49: file is corrupt
Click to expand...
Click to collapse
you should try extracting it with Winrar
because its packed with it.

My microusb port not working..Any way to flash xolo rom ???

Bradex Rom S6

New sources found, for the next version of this Rom all the credits belongs to @Ciro and his team for having created the Ciro's Project Lucky
Link TWRP, STOCK FIRMWARE AND CAMERA FIX :
https://mega.co.nz/#F!CA8khTCK!cHzF_HYFgYACwOWju56UPQ
Link ROM:
How To Install:
1) Download the folder with all files (recommended) or all of the individual files (if you already have some necessary file on your computer and do not want to re-download)
2) Make a backup because the system will be formatted
3) From the current recovery do everything possible to wipe excluding sdcard
4) Start the phone in Download Mode
5) Connect your phone to your computer and start Odin
6) Check that the phone is marked on odin as COM: "Number" and that the boxes are checked ONLY "Auto reboot" and "F. Reset Time")
7) Click on AP and select the firmware file you downloaded
8) Wait for checks the md5
9) Press on start
10) After the device reboots; after the re-start it off and re-enter Download Mode
11) Reopen Odin and cliccrare AP
12) Select the file of TWRP
13) Click on Start and wait for the end; after the device starts
14) Copy the files of the Rom
15) Turn off your device
16) Go into recovery mode (Vol UP + Home Button + Power Button)
17) Select Wipe Data and then "Yes - Wipe all user data"
18) At the end of the process choose Wipe Cache and then back to "Yes"
19) At the end of the process and then choose Advanced Wipe Dalvik-Cache and then select "Yes"
20) At the end of the process, select "Install Zip", then "choose zip from / sdcard" and select the zip of the rom and then press "Yes"
21) At the end of the process do a Wipe of the Cache
22) At the end select "reboot system" and wait for the boot (5-10 min)
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross, Ciro
Source Code: http://forum.xda-developers.com/galaxy-s3-neo/development/rom-ciro-s-rom-t3356584
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Stock 4.4
Based On: Samsung Stock
Version Information
Status: Stable
Current Beta Version: Bradex ROM 9.0
Beta Release Date: 2015-09-25
Created 2015-04-15
Last Updated 2016-06-11

Reserved

Reserved

I'll test. Send a link and I will install it right away. ?
Sent from my GT-I9301I using XDA Free mobile app

I want to test it man

I want to test this rom
Can you send a link I will test it

is it working both dual sim and single sim ??

The developer settings doesnt work

I want to test My phone gt-i9301i

did you ported this rom on lollipop?

fraross said:
WARNING: I WANT TO REPORT THAT THE ROM HAS NOT BEEN CREATED BY ME BUT IT'S ONLY THE PORTING PORTING OF THE ONE OF @singhking83 . ALL CREDITS TO HAVE CREATED THE ROM BELONG TO @singhking83. IF YOU LIKED THIS ROM PLEASE SAY THANKS TO @singhking83
I'M LOOKING FOR DEVELOPERS AND TESTER FOR THIS PORT.
UNTIL @singhking83 DOESN'T ANSWER TO MY PRIVATE MESSAGE FOR PERMISSION TO MODIFY HIS ROM I CAN NOT SHARE THE LINK THAT CONTAINS THE WORK THAT I HAVE DONE UNTIL NOW.
WHEN HE WILL ANSWER I'LL SHARE THE LINK...
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross
Source Code: http://forum.xda-developers.com/galaxy-grand-2/development/rom-s6-styled-s5port-rom-t3061428?nocache=1
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: Stock
Based On: Samsung Stock
Version Information
Status: Testing
Current Stable Version: not relased yet
Current Beta Version: V1.0
Beta Release Date: 2015-04-15
Created 2015-04-15
Last Updated 2015-04-15
Click to expand...
Click to collapse
i can test it bro

test
I will test it if it
my device is I9300I

This is the link of my work:
https://mega.co.nz/#!bQliFIII!o37BeEaTn8g667k00Q1Yw2ZxBjrf4MoXzdWTLArNlEw
This is a port for the single sim version of s3 neo. I still haven't tested it...
WORKS ONLY WITH GT-I9301I

Should i try it on the dual sim version?

viraj147 said:
Should i try it on the dual sim version?
Click to expand...
Click to collapse
No, if you try to flash it on dual sim version your device will go in brick or bootloop

does the developer option work in your rom, because i try it orginal bradex rom and they doesnt work?

ok thanks
any news on when you will make it for the dual sim version?

Please port it to dual sim I9300I

For this version of Bradex Rom, I'm basing on another Rom. For now, I want to do a porting of the base Rom working.

Can we get more info?
Does Install instruction are the same? wipe cache and data and install zip?
recovery installation? TWRP or CWM?
Can we install from CM12 or only from base stock?
Any screenshot?

[EOL][UNOFFICIAL][MIUI9 for vivo Y51L/Y21L]

INTRODUCING MIUI 9 FOR VIVO
MIUI 9 FEATURES:-​LIGHTER THAN STOCK
BETTER UI THAN STOCK ROM
ALL MIUI 9 FEATURES
ADD ON:-​PLAY STORE
WHATSAPP
OTG FIXED
BUGS:-​NO BUGS !!
DOWNLOADS:-​
MIUI 9 (9.2.5.0) :- https://drive.google.com/file/d/1NaF7zB5Nfz9KwI1l9y02zsTOvgAsoeLj/view?usp=sharing
HOW TO INSTALL:-​
UNLOCK BOOTLOADER
FLASH TWRP
FLASH THE ROM
REBOOT
DONE !!!
IF YOU LIKE THE ROM HIT THE THANKS BUTTON !!!​
XDA:DevDB Information
MIUI 9 FOR VIVO Y51/Y21, ROM for all devices (see above for details)
Contributors
AYUSH KUMAR, NAVEEN SINGH
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: PD1510F_EX_C_2.6.13 FOR VIVO Y51
Based On: MIUI 9 (REDMI 2/PRIME)
Version Information
Status: Stable
Current Stable Version: 9.2.5.0
Stable Release Date: 2018-05-25
Created 2018-05-25
Last Updated 2018-05-25

Hello，Could I update to 7.1.2?

hejun said:
Hello，Could I update to 7.1.2?
Click to expand...
Click to collapse
No sir you cant because we dont have kernel sources

Does this have 4G LTE support?

there is a problem with saturation

shadow_xx said:
there is a problem with saturation
Click to expand...
Click to collapse
I made a modified kernel however I only used in Vivo Y21L and it's saturation issue is gone you can try this too. Extract this rar file . First flash Miui After miui flashing is done go to twrp then click install then click install image option in down right corner then select this extracted .img file then a prompt will be popped up and select boot then swipe to flash it then reboot to your system and your bug will be now fixed.

Is there smart assistant in it

download page not found

nitabarui4 said:
I made a modified kernel however I only used in Vivo Y21L and it's saturation issue is gone you can try this too. Extract this rar file . First flash Miui After miui flashing is done go to twrp then click install then click install image option in down right corner then select this extracted .img file then a prompt will be popped up and select boot then swipe to flash it then reboot to your system and your bug will be now fixed.
Click to expand...
Click to collapse
Twrp for y21l, where to find?

The download link died. Any mirrors?

LINK UPDATED !!!

It's working on vivo y51L.. sometime I face charging issue otherwise it's working fine.. flashlight also working in notification bar..

Kernel xperia xa1 - all variants - stock/lineageos/aosp

KERNEL XPERIA XA1
Hello . Today I want to present kernel based on stock , but dedicated for my rom and not only !! (you can use this kernel on stock rom , but he can brick your device . On stock you can flash it on your own risk !!) .
Soon I publish my own port of Lineage os based on android 8.1 , and I publish too AOSP (AOSP is port too from nexus device) .
Whats new :
-Kernel have added new features
-Disabled boot animation
-Check ini was disabled
-Better speed of lte but soon I add patch for better signal of 2G/3G/LTE networks
-Low ram mode enabled
-Go apps support enabled
-Decrease boot time
-Fixed dalvik vm heapsize
-Disabled adb notify
-Enabled support for treble (latest updates get options for use treble on XA1 , now kernel have support later ROM get support for treble !!)
V2:
-Signal Performance
-Save Battery Without Performance Drop
-Allow Purge of Assets To Free Ram
-Smooth Video Stream
-Increase General Performance
-Support for Xperia XA1 PLUS - kernel tested work's fine only G3412 , but can to be sometimes and series speaker bug ... - Than you flash my boot img please make a backup of actual
HOW TO UPGRADE XA1 FOR CORRECT WORKING KERNEL AND OPTIMIZE FOR MY ROM :
1.DOWNLOAD ROM FOR G3112 (CIS)
2.AFTER ,,MAKE'' ROM VIA FLASHTOOL OPEN HIM VIA 7ZIP
3.OPEN META INF
4.CHANGE DEVICE TO YOUR DEVICE MODEL
Manifest-Version: 1.0
Created-By: FlashTool
version: 48.1.A.2.21
branding: Customized
cda: 1311-7593
revision: R1A
device: XXXX
cmd25: false
noerase: APPS_LOG,DIAG,QNOVO,USERDATA,CUST-RESET
XXXX - IS YOUR MODEL
5.SAVE FILE AND EXIT (NOW 7 ZIP SAVE MODIFICATIONS)
6.EXIT 7 ZIP
7.START FLASH TOOL
8.FLASH NEW ROM WITH ALL WITHOUT : USERDATA,PARTITIONS,OSV-RESTRICTION,CUST-RESET
THIS DON'T BRICK YOUR DEVICE , THIS PROCEDURE UPDATE YOUR DEVICE AND PARTITIONS TO USE MY ROM AND KERNEL !!
NOW YOU CAN USE CIS STOCK ROM WITH MY KERNEL OR INSTALL MY ROM AND MY KERNEL .
HOW IT WORKS :
STOCK ROM + MY KERNEL = NORMAL PERFORMANCE LITTLE FASTER THAN NORMAL
MY ROM + MY KERNEL = 80% MORE FASTER ROM AND PERFORMANCE OF YOUR DEVICE !!
Kernel was dedicated for xperia XA1 (all variants tested and fully working !! )
Kernel:
Android version : stock 8.0 / Lineage os 15.1 (8.1) / AOSP (8.1) / OREO 8.1 (FIRST EDITIONS OF OREO GO WITH DISABLED SOME FUNCTIONS VIA GOOGLE ,WITH PORTED SOME APPS OF SONY TO ROM)
Kernel version : 4.4.83+
Platform : 32bits/64bits
Build number : 48.1.A.2.21
Flashing is very easy because , you can flash new boot img via recovery or fastboot !!
Than you flash my kernel please make backup of actual kernel !!
Backup is for your safe not my .
DEVICES:
All Xperia XA1 - all variants .
Plus and Ultra - This variants to be available soon , Temporarily is not available .
If you download my kernel or rom please press thanks and buy me good beer
V2 you can install on stock rom !!
All links is short links , click skip ad and download from google drive img file .
Download :
CLICK HERE​
V2 - CLICK HERE​

reserved

MAREK10747 said:
KERNEL XPERIA XA1
Hello . Today I want to present kernel based on stock , but dedicated for my rom and not only !! .
Soon I publish my own port of Lineage os based on android 8.1 , and I publish too AOSP (AOSP is port too from nexus device) .
Whats new :
Kernel have added new features , disabled boot animation , check ini was disabled , better speed of lte but soon I add patch for better signal of 2G/3G/LTE networks .
Kernel was dedicated for xperia XA1 (all variants tested and fully working !! )
Kernel:
Android version : stock 8.0 / Lineage os 15.1 (8.1) / AOSP (8.1)
Kernel version : 4.4.83+
Platform : 32bits/64bits
Build number : 48.1.A.2.21
Flashing is very easy because , you can flash new boot img via recovery or fastboot !!
Than you flash my kernel please make backup of actual kernel !!
Backup is for your safe not my .
If you download my kernel or rom please press thanks
Download :
Download link to be added today !! Please don't delete this thread .​
Click to expand...
Click to collapse
Wow nice to hear that, will it work on XA1 Plus G3412 Build. 48.1.A.2.21

Now only XA1 . Plus and ultra to be soon !! . AOSP to be first release , but now i test bug's on actual AOSP based on stock

Treble on AOSP . This is only on my rom , but recovery have problem with restore and after restore my rom via recovery wifi don't working correct .

New ROM based on stock Kernel to be soon .

Will you make a video to show us how to install this safetly? , because 1 Month ago i tried to install a ROM on my XA1 and i totaly bricked, but was repaired in warranty,and i don't want again to happen.

AlinPletea said:
Will you make a video to show us how to install this safetly? , because 1 Month ago i tried to install a ROM on my XA1 and i totaly bricked, but was repaired in warranty,and i don't want again to happen.
Click to expand...
Click to collapse
Via Fastboot
Fastboot flash boot boot-v2.img
That's all . You don't need more . Fastboot is very safe and you can install boot img via fastboot .

MAREK10747 said:
Via Fastboot
Fastboot flash boot boot-v2.img
That's all . You don't need more . Fastboot is very safe and you can install boot img via fastboot .
Click to expand...
Click to collapse
But I must to have rooted phone,unloock bootloader,instaled custom rom or I just to use fastboot on the curent Android Oreo?

AlinPletea said:
But I must to have rooted phone,unloock bootloader,instaled custom rom or I just to use fastboot on the curent Android Oreo?
Click to expand...
Click to collapse
You should have the bootloader unlocked, so you can use the fastboot to flash this kernel. Just it.

boyrock said:
You should have the bootloader unlocked, so you can use the fastboot to flash this kernel. Just it.
Click to expand...
Click to collapse
check your link is for v2 file

Link for V2 is working correct . Link is shorted because is better . I have statistics how many users download my kernel or rom

this didn't work for me got stuck in boot loop

teamtatty11 said:
this didn't work for me got stuck in boot loop
Click to expand...
Click to collapse
First one hour can stay on sony logo , but later all will be work correct and faster . Your rom must to be the same as kernel . What is your model ????

it doesn't stick on the sony logo though it keeps restarting and not progressing any further , i am using xa1 g3121 i had stock rom so should of worked fine i think ? . Any way to restore twrp as i used a different recovery.img before and now i can't use twrp either lol

teamtatty11 said:
it doesn't stick on the sony logo though it keeps restarting and not progressing any further , i am using xa1 g3121 i had stock rom so should of worked fine i think ? . Any way to restore twrp as i used a different recovery.img before and now i can't use twrp either lol
Click to expand...
Click to collapse
Soo TWRP at this moment don't working . If you have stock rom in your G3121 (i have too G3121 but reworked to G3112) , you must upgrade your device , not only rom, bootloader, software etc. You must upgrade all ... next you restore rom and kernel . I add soon medium rom and know how about upgrade device .

OK I keep looking see for updates will you be able to get recovery working with your kernel and rom? for now I rolled back to nougat and managed to get rooted with twrp again. Frustrating there seems to be no way to get this to work on oreo though. The firmware I have now makes camera pretty rubbish as autofocus doesn't seem to work.

teamtatty11 said:
OK I keep looking see for updates will you be able to get recovery working with your kernel and rom? for now I rolled back to nougat and managed to get rooted with twrp again. Frustrating there seems to be no way to get this to work on oreo though. The firmware I have now makes camera pretty rubbish as autofocus doesn't seem to work.
Click to expand...
Click to collapse
In next releases I add recovery working fully with kernel . At this moment re-work your phone without some partitions to G3112 , and use my oreo with kernel in last version (v5 - v5 i upload today) with working autofocus and other nice functions .

How do I rework to a different model? I'm not sure how to do that

With the same method . I wrote how to in post . Important is the same model not other !! If you have xa1 you can rework to xa1 too , not to xa1 plus , ultra etc.

[ROM] Custom Recovery Flashable Stock Firmware for Realme X [RMX1901]

This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29

Can China variant flash this? Thx

is everything working fine? volte, camera, fingerprint?

At last have been asking Ajit for long time xD

nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.

Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?

can i flash into my china realme x, i am running RMX1901CN_A17 version.

Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.

indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?

About this flashable a07 zip .. Remember in group.. Raunaq ..?
 @4j17h
I asked u about making this zip few weeks ago

Does jio volte work on Indian variant?

ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.

indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.

Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?

Hello, on chinese model I receive error 7 (error patching system image), can you help me?

Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?

phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!

Please make it flashable in Chinese variant too.thanks in advance

How to root this rom? What magisk do you use?

djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.