Dear sirs & all friends
I have nokia x & I had rooted it to install swapper 2
I had enabled swap space & to activate the swap memory on external sd card swapper 2 told me to reboot the device.
This was a mistake since now My nokia x will not boot in any case & is completely dead.
It even fails to boot into recovery mode.
It even does not show nokia logo.
Screen remains blank even after a removing battery and powering up again by putting battery back
Windows 8 detects it as a usb drive & asks to format it.
I am afraid to format it since it may completely make the device dead
I have tried nokia care to flash rom but it also fails to detect the phone even after pressing volume down button and power button(given procedure on nokia care)
I tried nokia x toolkit but it even fails to detect the phone
I searched the internet but every method on internet asks to boot into recovery mode which will not work in my case since my phone is not booting in recovery mode.
/COLOR]Please help me recover restart my nokia x["
Whatisbad17
First of all, congratulations for getting your device bricked.
Well, jokes apart, I might be able to help you on how to fix this. Just follow step by step everything.
1. Download Nokia X Flasher from here: http://forum.xda-developers.com/showthread.php?t=2744881
2. Install it. Run it and keep it ready.
3. As your phone is dead, I advise you take out the SIM and SD card and keep them away.
4. Now you need to flash the latest v1.2.2 update. For that, you need to follow the great tutorial here: http://forum.xda-developers.com/showthread.php?t=2744881
If this works, you could always thank me or buy me a bear.
If any problems, I'm alive. Cheers.
One thing i'd like to add, that in the guide it tells you to enter bootloader mode via power button. I advise you to simply turn your phone off, hold the volume button down and insert the usb cable. It should go into bootloader mode.
i have same problem, brick nokia x, try that flasher but it didnt detect my phone
Nokia X dead
Dom3616 said:
First of all, congratulations for getting your device bricked.
Well, jokes apart, I might be able to help you on how to fix this. Just follow step by step everything.
1. Download Nokia X Flasher from here: http://forum.xda-developers.com/showthread.php?t=2744881
2. Install it. Run it and keep it ready.
3. As your phone is dead, I advise you take out the SIM and SD card and keep them away.
4. Now you need to flash the latest v1.2.2 update. For that, you need to follow the great tutorial here: http://forum.xda-developers.com/showthread.php?t=2744881
If this works, you could always thank me or buy me a bear.
If any problems, I'm alive. Cheers.
One thing i'd like to add, that in the guide it tells you to enter bootloader mode via power button. I advise you to simply turn your phone off, hold the volume button down and insert the usb cable. It should go into bootloader mode.
Click to expand...
Click to collapse
Dom3616
Sorry but your Nokia X flasher does not detect my nokia X because whenever I remove battery & replace battery, & then power up device by pressing volume down & power button, & releasing vol down button after 15 seconds of vibration of device, the device does not show anything on screen.
I am still stuck with dead nokia X.
Please help again with different solution
Anybody please help
Whatisbad17
Does the phone not show up at all on your computer?
One thing I must add is that you need to enter bootloader mode, by simply pressing volume down button when inserting usb cable. No need to power up device. And although you may not see anything on screen, you'll still be in bootloader mode.
---------- Post added at 09:23 PM ---------- Previous post was at 09:15 PM ----------
Check these softwares out:
http://news.softpedia.com/news/Noki...y-Tool-for-Fixing-Bricked-Phones-424125.shtml
http://www.softpedia.com/progDownload/Nokia-Software-Updater-Download-141287.html
I've heard these have unbricked many phones. Try these out and report back.
not working too
Nokia x dead
:crying::crying::crying
I powered down device by removing battery & replacing battery
Then I pressed vol down button as suggested by you & connected it to usb cable
A windows dialog box pops us asking me to format the phone which I always deny
Then I tried to recover the firmware by trying nokia care suite but in vain .
The device is simply not detected by nokia care suite or adb
what should I do?
Nokia x dead
:crying:
Even I tried nokia software updated & nokia software recovery tool but these softwares I think are for LUMIA devices & nokia x
They both fail to detect my phone
:crying:
HELP
nokia x dead bricked
I cannot use this tool, my pc only detect Qualcomm CDMA Technology MSM... i try volume down then insert usb, but still the same detection pls help...
Same here...my pc also detects my nokia x as Qualcomm Device....i accidentally formatted my phone using pc
Please help XDA....We need your help !
k3t3k said:
I cannot use this tool, my pc only detect Qualcomm CDMA Technology MSM... i try volume down then insert usb, but still the same detection pls help...
Click to expand...
Click to collapse
basit21 said:
Same here...my pc also detects my nokia x as Qualcomm Device....i accidentally formatted my phone using pc
Please help XDA....We need your help !
Click to expand...
Click to collapse
whatisbad17 said:
:crying:
Even I tried nokia software updated & nokia software recovery tool but these softwares I think are for LUMIA devices & nokia x
They both fail to detect my phone
:crying:
HELP
Click to expand...
Click to collapse
Try Installng qualcomm pc drivers : http://www.driverscape.com/download/qualcomm-cdma-technologies-msm
After that, charge your phone for atleast an hour and check whether pc detects adb or fastboot. I hope this fix runs. Give me feedback.
Dom3616 said:
Try Installng qualcomm pc drivers : http://www.driverscape.com/download/qualcomm-cdma-technologies-msm
After that, charge your phone for atleast an hour and check whether pc detects adb or fastboot. I hope this fix runs. Give me feedback.
Click to expand...
Click to collapse
i have this problem and my device breaked . :crying:
in cmw i format sys boot and now when i power my device just vibrate and when i connect to pc detect qualcomm pc drivers
pls help me how to fix this problem ?
gandolf007 said:
i have this problem and my device breaked . :crying:
in cmw i format sys boot and now when i power my device just vibrate and when i connect to pc detect qualcomm pc drivers
pls help me how to fix this problem ?
Click to expand...
Click to collapse
Install the drivers above, and then see if you can enter adb or fastboot. Hope this works.
---------- Post added at 07:42 PM ---------- Previous post was at 07:09 PM ----------
gandolf007 said:
i have this problem and my device breaked . :crying:
in cmw i format sys boot and now when i power my device just vibrate and when i connect to pc detect qualcomm pc drivers
pls help me how to fix this problem ?
Click to expand...
Click to collapse
You can also try this.
For all those who have bricked their phones.
Download Nokia Flasher.
Remove the battery and sd card from the device,
Without the battery in, hold down the volume - key while inserting the usb cable into your phone.
If it detects you in adb or fastboot, use this guide to flash the stock rom: http://forum.xda-developers.com/showthread.php?t=2747262
If it detects Qualcom device, download and install the drivers which I have provided in the previous post. After you have done this, you just might be able to connect to adb.
Report back if it works.
Dom3616 said:
Install the drivers above, and then see if you can enter adb or fastboot. Hope this works.
---------- Post added at 07:42 PM ---------- Previous post was at 07:09 PM ----------
You can also try this.
For all those who have bricked their phones.
Download Nokia Flasher.
Remove the battery and sd card from the device,
Without the battery in, hold down the volume - key while inserting the usb cable into your phone.
If it detects you in adb or fastboot, use this guide to flash the stock rom: http://forum.xda-developers.com/showthread.php?t=2747262
If it detects Qualcom device, download and install the drivers which I have provided in the previous post. After you have done this, you just might be able to connect to adb.
Report back if it works.
Click to expand...
Click to collapse
tanx but nokia x flasher not detected my device !!
gandolf007 said:
tanx but nokia x flasher not detected my device !!
Click to expand...
Click to collapse
Did you install qualcom drivers?
Dom3616 said:
Did you install qualcom drivers?
Click to expand...
Click to collapse
I think he broke his bootloader partition..
Hi, please check out this link
http://news.softpedia.com/news/Nokia-Launches-Software-Recovery-Tool-for-Fixing-Bricked-Phones-424125.shtml
EDIT:
i think this one is more useful.
http://www.seidea.com/2014/05/25/dead-flashing-nokia-x-with-nokia-care-suite/
Surpriser said:
Hi, please check out this link
http://news.softpedia.com/news/Nokia-Launches-Software-Recovery-Tool-for-Fixing-Bricked-Phones-424125.shtml
EDIT:
i think this one is more useful.
http://www.seidea.com/2014/05/25/dead-flashing-nokia-x-with-nokia-care-suite/
Click to expand...
Click to collapse
"Nokia Software Recovery Tool is now available for download via company’s support site, but is only compatible with Windows Phone 7 and newer."
Ok maybe secound link become usefull.
Sent from my Xperia Play using Tapatalk
I am facing the same issue. I ve installed quallcom driver but its not detecting fastboot [vol- and without battery]
Please help me out? What should I do now??
Related
Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.
tonictone said:
Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.
Click to expand...
Click to collapse
dont worry .. nothing is lost
bring up the phone in bootloader .. vol down reset
connect the usb cable, on screen should write USB (instead of serial)
and now just run the customRUU.exe file that is usualy in archive you downloaded the rom, and just follow the instruciotions.
(like you are flashing without mtty! from computer)
hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz
R.seed said:
hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz
Click to expand...
Click to collapse
Now if I do the above it comes up saying no image found then says trigger usb host
Click to expand...
Click to collapse
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?
vicai said:
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?
Click to expand...
Click to collapse
yes..youre right..i did the same thing, after i've mtty (after type task 8), i forgot to initiate ROM flash and did hard reset+clear memory, so the image (diamimg.nbh) in movinand memory is erased.
So, we still can flash with custom RUU. bring your device in bootloader, you will see serial mode change into usb, then execute custom RUU.exe. follow the instruction.. but make sure your battery is enough..
Hope it help you..
Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response
tonictone said:
Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response
Click to expand...
Click to collapse
welcome
glad to help
i have strange problem with my Samsung galaxy grand i9082 is not detecting in odwin.
phone is detected by pc, its connected as MTP or PTP mode i can transfer file from pc and mobile. but phone is not detected in odin
also when phone in download mode its not detected in odin (pc can detect it)
i have tried all odin version 3.04, 3.07. 3.09 but same problem.
phone was getting detected in odin with stock 4.2, after i flashed to custom ROM probam-20140312-UNOFFICIAL-i9082-k2wl-build9 , its not getting detected in odin.
please help me..
ROM :- probam-20140312-UNOFFICIAL-i9082-k2wl-build9
recovery :- philz_touch_6.19.3-i9082
i have tried with different USB cabled, but same problem phone is deteced by pc but not by odin, same problem on wint7, win xp, i tried it on different pc also...
please let me know what can be done, i want to re-flash to stock 4.1
Install driver software of Samsung and install the kies in pc but dont open tge kies with odin coz it will fail ur flashing process..See whether drivers r installed or else odin will not detect...
Sent from my GT-I9082 using XDA Premium 4 mobile app
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
anup13 said:
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
Click to expand...
Click to collapse
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
Click to expand...
Click to collapse
Don't use Samsung cables use different one in my case i used old Nokia usb cable and it worked...
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
Click to expand...
Click to collapse
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Uninstall all drivers n kies as well....restart ur pc n install again from scratch....n try...it happened with me many times...just suggestion...
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
anup13 said:
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
Click to expand...
Click to collapse
Thats Great!! HAppy to hear that :laugh: :good:
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks alot man, it worked great! i had the same problem as above!
Odin is not detecting my phone
I have tried almost all methods, but still my samsung i9082 is not detected by odin. And when ever i connect my samsung with laptop during download mode.. One driver is shown as not installed name "CDC serial".
Please help
Not Detecting Odin + Dnt have CWM , and need custom rom
i have same problem , it says Base Station Not Installed ,
1. I am unable to enter to recovery mode it goes on both volume up+ home + power & volume down+ home + power , into download mode .
2. I need to flash custom rom and want any CWM so i can go to recovery mode whenever i want
3. When i factory reset from setting , it only runss on android cartoon , and after that it goes straight to screen , no language selection as we do in all androids after reset by clicking next next , but it goes directly to screen.
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
inayat1988 said:
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
Click to expand...
Click to collapse
What do you mean exactly by changed phone and buy another one?
INVALID IMEIs / SIMS not working
Dear Sir,
I got that i need IMEI fixing as it is showing invalid both imeis. (board is MT6572)
1. Set is LG L Bello , info is given in pix attched please.
2. For rooting Tried almost all methods GUI but all failed rooting.
3. Tried To fix IMEI from MTK-DROID-TOOLS , showing errors, pix are attached.
Please help me to flash CWM , Root my device and fix Invalid IMEIs issue.
Note : all info i considered needed for you to help me, is attached in shape of pix
Best Regards,
Inayat
please help me and save me
please help me my grand 2 is made by Vietnam, and its not detectable in any of the trick mentioned above , please help me , one thing when i plug my mobile with pc , and check the my pc properties , it shows yun os interface .. please help me how i can able to detect this interface with odinn please help ...
Hello Folks,
As i already said i´m so busy these days, i would like to continue my developing with NokiaX at least i know @dhacker29 is working in device too.
With a recovery booting but with framebuffer troubles (have to check it again with the new kernel..)
Im gonna release a new way to Root our device.
A few weeks ago i found something really weird in my device so i reported it to Nokia security team...now its fixed but Im a little disappointed about that.. but this is another story.
So, lets go with this little guide.
First i must to say, why i should research and wasting my non-time trying or writing new exploits when we have something that still works.
So all this credits goes to ZJMedia
Download this package from http://goo.gl/LiQzz1
Now when your device is updated and plug in.
1- Install Nokia Composite ADB Interface (using it from Nokia Usb Drivers folder)
2- Open KingRoot app while device its working and plugged (If everything goes fine, should be detected as: Android Device (msm8625) Normal Mode
Yes, i know it.... KISS principle
Appreciate for your hard work. May I ask how to use the folder of NokiaX USB Drivers? Where is it put?
Thank you Kashamalaga!
For those wondering what to do with the Nokia drivers:
-Plug your phone to your computer
-Go to device manager and find your phone on the list(it should have a punctuation mark for windows 7 users)
-Right click on your phone and install the nokia drivers
oaba09 said:
Thank you Kashamalaga!
For those wondering what to do with the Nokia drivers:
-Plug your phone to your computer
-Go to device manager and find your phone on the list(it should have a punctuation mark for windows 7 users)
-Right click on your phone and install the nokia drivers
Click to expand...
Click to collapse
Thanks for your answer. I know the steps. But I have a question following.
Does the 32 bit computer choose the folder of i386 and the 64 bit computer choose the folder of amd64 while installing the nokia drivers?
Nokia
Good news nokia x you got some senior developers @Kashamalaga for now
yurinaka said:
Thanks for your answer. I know the steps. But I have a question following.
Does the 32 bit computer choose the folder of i386 and the 64 bit computer choose the folder of amd64 while installing the nokia drivers?
Click to expand...
Click to collapse
When I was prompted to choose the location of the driver, I just chose the main nokia folder. Your computer should automatically choose and install whatever driver is needed.
Sent from my GT-I9300 using Tapatalk
oaba09 said:
When I was prompted to choose the location of the driver, I just chose the main nokia folder. Your computer should automatically choose and install whatever driver is needed.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you. Totally understand now.
Sent from my GT-I9300 using Tapatalk
With rooted device:
1. Download update OTA file
2. Copy to SDcard and rename to update.zip
3. Power off phone (press power butom about 15s)
4. Press and Hold Power_Butom & Volume+ Butom until show Nokia text on screen, then the phone will go to recovery mode
5. Choose install zip and brower to update.zip on SDcard
6. Wait the setup complete
7. Reboot phone
8. Done
read somewhere Root Master 1.3.6 works on rooting 11.1.1 can anyone confirm?
Kashamalaga said:
Hello Folks,
As i already said i´m so busy these days, i would like to continue my developing with NokiaX at least i know @dhacker29 is working in device too.
With a recovery booting but with framebuffer troubles (have to check it again with the new kernel..)
Im gonna release a new way to Root our device.
A few weeks ago i found something really weird in my device so i reported it to Nokia security team...now its fixed but Im a little disappointed about that.. but this is another story.
So, lets go with this little guide.
First i must to say, why i should research and wasting my non-time trying or writing new exploits when we have something that still works.
So all this credits goes to ZJMedia
Download this package from http://goo.gl/LiQzz1
Now when your device is updated and plug in.
1- Install Nokia Composite ADB Interface (using it from Nokia Usb Drivers folder)
2- Open KingRoot app while device its working and plugged (If everything goes fine, should be detected as: Android Device (msm8625) Normal Mode
Yes, i know it.... KISS principle
Click to expand...
Click to collapse
A complete Success !! Best and the easiest way to root your Nokia X after update 11.1.1 I'll recommend it in my Youtube channel :good:
Help needed !
MicrosoftGoogle said:
With rooted device:
1. Download update OTA file
2. Copy to SDcard and rename to update.zip
3. Power off phone (press power butom about 15s)
4. Press and Hold Power_Butom & Volume+ Butom until show Nokia text on screen, then the phone will go to recovery mode
5. Choose install zip and brower to update.zip on SDcard
6. Wait the setup complete
7. Reboot phone
8. Done
Click to expand...
Click to collapse
I'm new here, can you please explain in step by step process from rooting and ADB !
install nokia usb folder success
my device detected on kingroot
but why it take so long when fecthing script
adhiomar said:
install nokia usb folder success
my device detected on kingroot
but why it take so long when fecthing script
Click to expand...
Click to collapse
It does takes time. No need to worry. Just don't go mad and re-boot your device because manually re-booting the device in process of rooting can brick your device.
Mrtoxicgamer10 said:
It does takes time. No need to worry. Just don't go mad and re-boot your device because manually re-booting the device in process of rooting can brick your device.
Click to expand...
Click to collapse
it's normal im waiting until 30 minutes? i can't wait n disconnect my phone while rooting process.n my phone not brick.i try to uninstall the driver n reset my phone.n install again nokia usb driver folder n blablabla.doing the root again n still take long time when fetching scripts aaaargh what happen with kingroot :crying:
adhiomar said:
it's normal im waiting until 30 minutes? i can't wait n disconnect my phone while rooting process.n my phone not brick.i try to uninstall the driver n reset my phone.n install again nokia usb driver folder n blablabla.doing the root again n still take long time when fetching scripts aaaargh what happen with kingroot :crying:
Click to expand...
Click to collapse
Try this maybe. I ain't promoting myself buy try these steps posted by me CLICK HERE
is there a still root access after the future updates?
Help me!
Kingo Root can not detect my Nokia X, I installed driver ADB interface already! Is it has something wrong with Windows 8.1 64bits? thanks
---------- Post added at 01:05 PM ---------- Previous post was at 12:53 PM ----------
nhocheshire said:
Kingo Root can not detect my Nokia X, I installed driver ADB interface already! Is it has something wrong with Windows 8.1 64bits? thanks
Click to expand...
Click to collapse
I fixed it, just download another version Kingo Root from Google
Guys, is there a version of Kingroot available for linux ? I tried to get the ADB working on a Windows7 VM but could not. ADB works fine on Ubuntu .
I have rooted nokia X but Google+ is not install?any one help me
Sent from my Nokia_X using xda app-developers app
problem of detecting during kingo root
Answer is just
1) download the attachment:good::good:
2) unzip it by winrar.
3) copy it to sd0(Internal memory) by connecting your nokia x.
4) just restart you device.
5) now connect ur nokia x by selecting usb mode
6) open kingo root
7) remove n then again plug in the usb from nokia x.
8) it will get detected
Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER
mkhmer said:
Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER
Click to expand...
Click to collapse
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom
Does your PC recognize your phone as Qualcomm HS-USB QDLoader 9008 or something else?
ludoke said:
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom
Click to expand...
Click to collapse
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]
mkhmer said:
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]
Click to expand...
Click to collapse
If PC doesn't recognize your device as Qualcomm HS-USB QDLoader 9008, you need to JTAG your device, or short pin.
Information about short pin;
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?
mkhmer said:
That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?
Click to expand...
Click to collapse
You have to disassembly your device.
My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite
ludoke said:
My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite
Click to expand...
Click to collapse
But when I remove the back cover, I see another stainless steel cover on those chip/board, how to remove it? Too risky!
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359/page8#post63750296
Here is a brioef guide i am also facing that issue from alst five days.. hope some master help to solve that situation
HELP!
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042
ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/spr...de-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Your computer recognize any serial port when you connect g3
[email protected] said:
Your computer recognize any serial port when you connect g3
Click to expand...
Click to collapse
Computer doesn't recognize anything... I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.
ExtremeD722 said:
I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.
Click to expand...
Click to collapse
I mean any responce in pc device manager when u connect ur mbl
[email protected] said:
I mean any responce in pc device manager when u connect ur mbl
Click to expand...
Click to collapse
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).
ExtremeD722 said:
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).
Click to expand...
Click to collapse
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
---------- Post added at 03:01 PM ---------- Previous post was at 02:53 PM ----------
ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Bro firt change ur window then install ur variant driver and qhbulk driver.After that if device manager show qhsub bulk port or something like then all problem will solve.If ur device manager show only lge serial port then use short wire method.:good:
[email protected] said:
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
Click to expand...
Click to collapse
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !
ExtremeD722 said:
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !
Click to expand...
Click to collapse
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow
[email protected] said:
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow
Click to expand...
Click to collapse
I will reply u soon. Why do u even need baseband and imei ?
Because my baseband. Unknown and imei is null
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
George_Samy said:
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
Click to expand...
Click to collapse
Carefully read it can help you with https://forum.xda-developers.com/de...n-restarts-continuously-t3548182#post71073715
My case is almost the same, but mine isn't detected for Windows (neither adb nor loader).
I had disconnected the battery, but without any results.
Any idea?
Clamp all 3 buttons and hold 1 minute. What happens?
vuk1963 said:
Clamp all 3 buttons and hold 1 minute. What happens?
Click to expand...
Click to collapse
n
Unfortunately, nothing
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the task manager on the computer to choose the interface adb to install the driver, specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY
vuk1963 said:
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
All started when the phone isn't capable to install the official update to 6.0.
I decided to try other ROM's, opening the boot loader and installing the TWRP recovery. All goes well, but the ROM that are working better (Tomal - Discovery 2.00) had problems with my LTE networks.
Reading one of your post, I started to try to install the official 6.0, but I forgot to wipe the system before relock the bootloader.
After trying flash different RUU files through fastboot I used one from easy firmware: (0PFJIMG_A51_UL_K44_DESIRE_SENSE60_Orange_ES_1.28.75.5_Radio_01.01.010_U10305041_08.01.41222_2__combined_signed.zip) that belong to my CID (Orange Spain)
Then the phone don't respond to anything...
I will uninstall all drivers and programs and restart according your instructions...
Click to expand...
Click to collapse
vuk1963 said:
lcarrasc said:
Yes, sadly, you need to restore the bootloader,and it's very difficult to do it yourself http://4pda.ru/forum/index.php?showtopic=643084&st=7060
Click to expand...
Click to collapse
Thanks. I understand that my phone is lost
I tried to use QFIL (romkingz.net/2016/07/how-to-use-qualcomm-flash-image-loader) but the computer hasn't recognised the phone...
Click to expand...
Click to collapse
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
lcarrasc said:
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
Click to expand...
Click to collapse
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
vuk1963 said:
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
Click to expand...
Click to collapse
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
lcarrasc said:
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
Click to expand...
Click to collapse
I also run Windows 10 х86 and in Device Manager has a ports (COM and LРТ)
What it's expected to find in the com ports?
lcarrasc said:
What it's expected to find in the com ports?
Click to expand...
Click to collapse
Something like: Qualcomm HS-USB QDLoader 9008 port com
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
lcarrasc said:
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
Click to expand...
Click to collapse
Clamp all 3 buttons and hold 1 minute,and try different variants combinations with holding the volume buttons + and - and the power button,with the connection of the phone to the computer and to the power unit
I tried all possible combinations of buttons, and nothing...
Any idea?