Develop Bugs

AT&T galaxy s3 softbricked

I was trying to install one of drewgarens touchwiz roms. touchwiz milestone 5 firefly i believe. not the most recent one because i was too lazy . boy was that a mistake. everything was going smoothly until it booted and it got stuck on boot. I thought no big deal just go into recovery and use a backup. until i did so and recovery was gone and there was only download mode. I have spent the whole afternoon trying to fix it and none of it has worked. I tried flashing the stock rom and it as well got stuck on boot. I looked at all the AT&t relevant ones and also the international versions. so all in all is there anyway to fix this and has anyone had the same issue? i was flashing from cyanogenmod 10 m1 to the drewgaren rom btw. I can also go to download mode. I tried to flash stock but it still gets stuck on boot. log. I flashed the ATT boot logo and it did not work. all of which were flashed through odin.
any thanks in advance is greatly appreciated.

I think you can flash back to stock with just download mode + odin

Randomacts said:
I think you can flash back to stock with just download mode + odin
Click to expand...
Click to collapse
I already tried that. It still get stuck on the Boot logo

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
I can't help you but I wish you luck.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Unplug your device. Hold the power button to turn it off. Hold volume up, home, and power. It should go to recovery. If you do the same thing with volume down instead of up, you can get into download mode.
Sent from my SAMSUNG-SGH-I747 using xda premium

Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.

jethro650 said:
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
Click to expand...
Click to collapse
I cannot enable usb debugging

Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.

jethro650 said:
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
Click to expand...
Click to collapse
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
Ok here we go Odin cwm--> https://dl.dropbox.com/u/28590257/Odin recovery/CWM-Recovery-LTE-SGS3-v4.tar.md5
Newest twrp --> https://dl.dropbox.com/u/28590257/Odin recovery/twrp2.3.1install.zip
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.

jethro650 said:
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
Click to expand...
Click to collapse
This may sound like a stupid question but what boxes do i tick in odin?

After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:

jethro650 said:
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
Click to expand...
Click to collapse
I was able to get it into recovery but i realized i did not have my sd card in so i turned it off and put my sd card in. unfortunately i was not able to get it back into recovery i tried flashing it again with the sd card in and no luck

That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?

jethro650 said:
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
Click to expand...
Click to collapse
oh my gosh THANK YOU SOOOMUCH. I was worried i would have to take it to at&t ill be sure to press the thanks button.

I take it you got your phone working lol. Glad I could help a little. Little advice, anytime you switch to a different type of ROM (aosp to stock based or the other way around) make sure you wipe data/factory reset before flashing anything. It will save you problems in the long run.
Oh and could you go back and edit your original post and just add solved in brackets to the title for people in trouble looking for info.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Depending on which stock ROM you flashed with odin you should now have a recovery, if not then something isn't right. The full bone stock ROM should have the factory 3e recovery, and the root injected stock ROM should have some version of CWM recovery. A factory reset will most likely fix your boot loop, if there is no recovery flash the rooted stock ROM that matches your device from this guide.
Edit - Didn't see there was a second page 0_o

Need Firmware! Please. SGSIII Sprint

The How To links by Qbking77 don't work and I can't get the required files. My phone is soft bricked and I can only access download mode. I can't access my recovery either.
I need to flash stock firmware etc. I was on Cyanogenmod. Any help is much appreciated.
IF someone could please post the firmware file so I can revert, I would be eternally grateful. Thank you.

Wrong section. Should be in Q&A/Help.
Sent from my SPH-L710 using xda premium

Please read forum rules before posting
Questions go in Q&A
Thread moved

http://rwilco12.com/downloads.php?d...H-L710)/Stock ROMs/JB/MD4/Full Restore/Rooted

jayo727 said:
http://rwilco12.com/downloads.php?d...H-L710)/Stock ROMs/JB/MD4/Full Restore/Rooted
Click to expand...
Click to collapse
Thank you. Just flash through Odin?

eldobeldo said:
Thank you. Just flash through Odin?
Click to expand...
Click to collapse
yes, just reflash through odin, you may have to do a full wipe. what recovery are you using?

nicklefloss said:
yes, just reflash through odin, you may have to do a full wipe. what recovery are you using?
Click to expand...
Click to collapse
He already said he can't get to recovery. He can only get to download. This is the perfect option though... it is a one click and it is going to install the stock recovery. For safe measure, I would suggest a factory default after flashing it. Then, flash a new recovery sometime after.

I just flashed an international kernel being careless and soft bricked my phone here's how I got it back.
1) Install USB Driver for Samsung Galaxy S3 on the computer. (Click Skip Ad on the top of the screen)
2) Download ODIN 3.07
3) Download the latest Sprint OTA 4.1.2 Jelly Bean Official Firmware L710VPBMD4_L710SPRBMD4_SPR.zip
4) Unzip the tar from L710VPBMD4_L710SPRBMD4_SPR.zip
3) Holding Home, Volume Down, then Power, get your phone in download mode. (Hit Volume up to continue once presented with Download Screen)
4) Connect USB Cable and launch Odin on the computer.
5) Make sure Auto Reboot and F. Reset Time are checked click on PDA and point to the TAR, after its verified hit start. Let it go through its paces your phone should be back to stock.
Edit: I also suggest you do Volume Up + Home + Power and then reset the phone to factory defaults after flashing. Will help things run smoother.

[Q] ClockWorkMod - Stuck in Odin Mode!

Hello Everyone,
I'm hoping someone can help me out.
I installed ROM Manager on my phone, and (honestly not sure why!) but I did. When I launched the application, it told me that v. 6.0 was available if I wanted to update - Stupid me, updated ClockWorkMod to v6.0.
Well, everything was fine.. until I decided to use the ROM Manager Backup option - When I rebooted, it got stuck on
"Could not do normal boot"
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFI_LSB: 0X30
WRITE PROTECTION: Enable
Downloading....
Do not turn off target!!
I'm not sure what to do at this point. I've tried VOL UP + HOME + POWER - but it goes right back to this spot. I've pulled the battery waited for 5 mins - then tried the same VOL UP + HOME + POWER - still nothing.
Any help would be greatly appreciated.
Thanks,
Jay

Don't press the home button is the first thing I can think of.
Power + Volume up = Custom Recovery
Power + Volume down = ODIN/Download mode
To get into Recovery mode:
Pull battery
Insert battery but Don't turn phone on.
Press Power + Volume up buttons and hold them until you see the custom recovery prompt in blue lettering in the upper left corner of the S4, and then immediately release the buttons. You should enter into Recovery.
I don't use CWM so I'm not that familiar with its installation, etc. But there are a few threads that go into CWM in detail.

Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..

JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
Here's the TWRP 2.5.0.2 file:
https://hotfile.com/dl/230303459/7ce1553/openrecovery-twrp-2.5.0.2-jfltexx.tar.html
Install with ODIN.
Steps to follow........
Method #1 -
Place file in PDA box*
Uncheck all other boxes.
Press start.
When installation is complete, unplug usb cord and pull the battery.
Insert the battery but Don't turn on the phone.
Place phone in Recovery mode via the Power + Volume up buttons.
Method #2 -
The other way I've read to install TWRP Recovery is:
Place the TWRP 2.5.0.2 tar in the PDA box*
Check the auto reboot box and f time reset box.
Start the installation and let the phone reboot.
I believe the above method is method of choice, but sometimes the Recovery doesn't take, so Method #1 is then recommended.
Here is an explanation why:
http://forum.xda-developers.com/showpost.php?p=41166759&postcount=28

TWRP been having some issues, even the one people claim to be stable. Be caution with that one as well. Let us know how it works out if not can direct you to other recoveries. There are several out there all working flawlessly. Just matter of what you want you know?

mgbotoe said:
TWRP been having some issues, even the one people claim to be stable. Be caution with that one as well. Let us know how it works out if not can direct you to other recoveries. There are several out there all working flawlessly. Just matter of what you want you know?
Click to expand...
Click to collapse
TWRP looks to have worked for me.
But I can see what you mean. I no longer get stuck in ODIN MODE - but I was having issues after dropping a ROM on my phone. Even after successful setup of the ROM, if I decided to reboot just for giggles. It would freeze on Samsung S4 Logo.
Well, I have since fixed this issue:
I believe the reason why I was getting stuck on Samsung S4 Logo on reboot was because in addition to wipe data/wipe cache/wipe dalvik - I also formatted the internal_sd - this is just a theory but my internal_sd regardless of me dumping a ROM on there, after reboot would do nothing - When I went in recovery - internal_sd showed 0MB. Thus, stuck boot screen. Nothing to boot too.
FIX: Installed STOCK ROM, and KERNEL - Confirmed, that reboot works after setting up phone. My understanding is that it installs all the necessary folder structure required. Got the STOCK ROM from: http://galaxys4root.com/galaxy-s4-stock-firmware/
Then followed this root process and recovery:
http://galaxys4root.com/galaxy-s4-ro...g-twrp-method/
Once I did that, booted to recovery did the normal (wipe data/wipe cache/wipe dalvik) then dropped ALPHA ROM on my phone, along with Infamous KERNEL, and everything is great. Reboots like a champ now. -- Still using TWRP, but v. 2.5.0 - (no issues as of yet! )

Glad to see all working out for you

JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
When you say "plugged it back up to ODIN" what exactly are you doing. Do I need to download an app to my PC? I am new to this... I'm stuck on the same screen.
Thanks in advance!

sincity said:
When you say "plugged it back up to ODIN" what exactly are you doing. Do I need to download an app to my PC? I am new to this... I'm stuck on the same screen.
Thanks in advance!
Click to expand...
Click to collapse
Install ODIN 3.07 to your pc
Install drivers for your device onto your pc
I'll post a link to the ODIN thread so you can see how it's done
Update:
Here ya go:
http://forum.xda-developers.com/showthread.php?t=2258628
Please read the above thread in the link carefully.
If your device is stuck on a screen, what were you doing prior to get to that state.
First, boot into custom recovery and Wipe cache and dalvik cache, reboot, and see if that helps.
Either way, you should have ODIN on your pc

Biker1 said:
Install ODIN 3.07 to your pc
Install drivers to your device.
I'll post a link to the ODIN thread so you can see how it's done
Update:
Here ya go:
http://forum.xda-developers.com/showthread.php?t=2258628
Click to expand...
Click to collapse
Thanks a million... I'll give it a try! Wish me luck!

sincity said:
Thanks a million... I'll give it a try! Wish me luck!
Click to expand...
Click to collapse
I edited my link above.
You'll be fine.
Any questions, ask in the thread after you read about ODIN and how it works.
Once you install it on to your pc, along with the drivers which enable youropc totrecognize your device you'll find it very helpful when needed.
I have, and so have almost everyone who have ever rooted their devices and/or flashed ROMs, etc
By the way, you are not rooted?
I ask because if you are, you would have used ODIN.
What is exactly wrong now with your device?
---------- Post added at 11:58 PM ---------- Previous post was at 11:43 PM ----------
JayCapo1-8125 said:
Plugged it back up to ODIN - pushed out the old ClockWorkMod and system booted back up!! Phew!!
I think I'm going with TWRP..
Click to expand...
Click to collapse
If you go with TWRP, don't use Goo Manager as that will install 2.6.0.0 which has some issues for some, as you probably know.
Install TWRP 2.5.0.2 with ODIN, which I did many months ago, and have had zero issues.
You can install with Mobile ODIN also I believe.

Biker1 said:
I edited my link above.
You'll be fine.
Any questions, ask in the thread after you read about ODIN and how it works.
Once you install it on to your pc, along with the drivers which enable youropc totrecognize your device you'll find it very helpful when needed.
I have, and so have almost everyone who have ever rooted their devices and/or flashed ROMs, etc
By the way, you are not rooted?
I ask because if you are, you would have used ODIN.
What is exactly wrong now with your device?
Click to expand...
Click to collapse
Ok I figured it out... I really appreciate your help! My blood pressure went down! LOL!
Yes my cell was rooted... I used GX4EX by:
Credits:
***Exploit adapted for AT&T by Jortex***
***Original Guide by Open1Your1Eyes0 for Verizon Galaxy S 4***
***Original Exploit by DooMLoRD***

[Q] galaxy w nothing work

my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?

can you post sompe picture of that?

if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app

MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.

mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.

hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.

mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file

Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad

TWRP install hel

trying to install TWRP. followed the guide, installed Goo manager, downloaded the file. it shows successfully installed. but it didnt reboot itself like it said it would.
not sure what do do?
Also i searched other posts, and saw you can install with odin. does anybody have the odin instructions?

jefffrizzle2001 said:
trying to install TWRP. followed the guide, installed Goo manager, downloaded the file. it shows successfully installed. but it didnt reboot itself like it said it would.
not sure what do do?
Also i searched other posts, and saw you can install with odin. does anybody have the odin instructions?
Click to expand...
Click to collapse
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it to flash the [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted
http://www.addictivetips.com/android...devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/...-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/77...x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
EDIT: just grabbed it from a guide

dicksteele said:
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it to flash the [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted
http://www.addictivetips.com/android...devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/...-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/77...x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
EDIT: just grabbed it from a guide
Click to expand...
Click to collapse
thanks so much. i would give u 10 thanks if i could.
i notice a lot of the howto guides on here on missing information

jefffrizzle2001 said:
thanks so much. i would give u 10 thanks if i could.
i notice a lot of the howto guides on here on missing information
Click to expand...
Click to collapse
Most of my stuff is survival guide... Notes I've made for myself just to make sure I can repeat what I've done, and make sure I don't repeat my FU's.
Words of wisdom..... Always back up your sh*t ! Because the day WILL come when something happens after you make a "little" change.

dicksteele said:
Words of wisdom..... Always back up your sh*t ! Because the day WILL come when something happens after you make a "little" change.
Click to expand...
Click to collapse
+1[emoji106][emoji106][emoji41]
Sent from my SAMSUNG-SGH-I317 using Tapatalk