Hey guys I was working on using odin to root my 10.1 and it wasn't working. So i decided to try a factory reset and try odin from a fresh install. My device powered down to do the wipe and now it won't come back on. If i hold the power button the "galaxy note 10.1 2014 edition" screen shows up and then the device just turns off again. How do I fix this?
Any help would be greatly appreciated. I'm freaking out a bit.
What root method were u trying ? Which version of galaxy note 10.1 2014 do you have p600, p605, p601 etc ? Did you use appropriate rom for your note?
It seems it is soft brick, it is not irrecovable problem, you can fix it by odin, i am not sure how, you should research about it.
I can get into odin mode. but that is it.
yararli said:
What root method were u trying ? Which version of galaxy note 10.1 2014 do you have p600, p605, p601 etc ? Did you use appropriate rom for your note?
iPhone 'den Tapatalk aracılığı ile gönderildi
Click to expand...
Click to collapse
I was using the cf auto root found here.
http://forum.xda-developers.com/showthread.php?t=2490805
I have an sm-P600.
god2many said:
I can get into odin mode. but that is it.
Click to expand...
Click to collapse
Good news now look up some topics about soft brick, if you can enter download mode in odin you can fix it but i am not expert on android i could not remember step by step and how.
I had experinced brick problem in my n8000 galaxy note old thats why i had researched so much thing one year ago, it was hard brick and did not enter even download mode, lucky you, it enters download mode Which means soft brick. You can reflash your custom rom easily. Please look at topics about soft brick.
yararli said:
Good news now look up some topics about soft brick, if you can enter download mode in odin you can fix it but i am not expert on android i could not remember step by step and how.
I had experinced brick problem in my n8000 galaxy note old thats why i had researched so much thing one year ago, it was hard brick and did not enter even download mode, lucky you, it enters download mode Which means soft brick. You can reflash your custom rom easily. Please look at topics about soft brick.
Click to expand...
Click to collapse
I found this guide on using odin to install the stock firmware.
http://theunlockr.com/2013/12/17/unroot-samsung-galaxy-note-10-1-2014-edition/
I need to find the correct rom to flash. I was running 4.4.2 but i cant find it for the US region on
http://samsung-updates.com/device/?id=SM-P600
god2many said:
I found this guide on using odin to install the stock firmware.
http://theunlockr.com/2013/12/17/unroot-samsung-galaxy-note-10-1-2014-edition/
I need to find the correct rom to flash. I was running 4.4.2 but i cant find it for the US region on
http://samsung-updates.com/device/?id=SM-P600
Click to expand...
Click to collapse
Here,
http://www.sammobile.com/firmwares/1/?model=SM-P600&pcode=XAR#firmware
god2many said:
I found this guide on using odin to install the stock firmware.
http://theunlockr.com/2013/12/17/unroot-samsung-galaxy-note-10-1-2014-edition/
I need to find the correct rom to flash. I was running 4.4.2 but i cant find it for the US region on
http://samsung-updates.com/device/?id=SM-P600
Click to expand...
Click to collapse
I thought all roms for p600 ones can be used, but now i am doubt about it.
iPhone 'den Tapatalk aracılığı ile gönderildi
lsherif said:
Here,
http://www.sammobile.com/firmwares/1/?model=SM-P600&pcode=XAR#firmware
Click to expand...
Click to collapse
Should I use the Cellular South version?
Thank you for being patient and helping me.
god2many said:
Should I use the Cellular South version?
Thank you for being patient and helping me.
Click to expand...
Click to collapse
Yes, that`s the US version, but still you can use any other version.
lsherif said:
Yes, that`s the US version, but still you can use any other version.
Click to expand...
Click to collapse
In odin instead of a button that says PDA. I get a button that says AP.
EDIT: Found it. It says on the firmware dl that ap and pda are the same thing.
lsherif said:
Yes, that`s the US version, but still you can use any other version.
Click to expand...
Click to collapse
finally ran ODIN (The firmware dl took about three hours as I have super slow internet) and it worked! Surprisingly it didn't end up wiping my device either.
Thank you so much for the help! :laugh:
god2many said:
finally ran ODIN (The firmware dl took about three hours as I have super slow internet) and it worked! Surprisingly it didn't end up wiping my device either.
Thank you so much for the help! :laugh:
Click to expand...
Click to collapse
Safest way to root would be to Odin a custom recovery then flash SuperSu zip file. It is much safer than the old CFautoroot way.
nrage23 said:
Safest way to root would be to Odin a custom recovery then flash SuperSu zip file. It is much safer than the old CFautoroot way.
Click to expand...
Click to collapse
Wouldn't this trip Knox?
I would think the Safest way to root would involve not using Odin. Ie. Towelroot (as applicable to your device, at this time)
drExel said:
Wouldn't this trip Knox?
I would think the Safest way to root would involve not using Odin. Ie. Towelroot (as applicable to your device, at this time)
Click to expand...
Click to collapse
CF-Auto already tripped KNOX. It shows a 1 when I boot to recovery. Does TowelRoot work for SM-P600's?
nrage23 said:
Safest way to root would be to Odin a custom recovery then flash SuperSu zip file. It is much safer than the old CFautoroot way.
Click to expand...
Click to collapse
Do you know any good detailed tutorials on flashing a recovery? I'm trying to be super cautious and not kill my device. I about had a heart attack last night when it soft bricked.
drExel said:
Wouldn't this trip Knox?
I would think the Safest way to root would involve not using Odin. Ie. Towelroot (as applicable to your device, at this time)
Click to expand...
Click to collapse
As far as i know Towelroot is not for the Wifi Version with Exynos processor.
god2many said:
Do you know any good detailed tutorials on flashing a recovery? I'm trying to be super cautious and not kill my device. I about had a heart attack last night when it soft bricked.
Click to expand...
Click to collapse
Here is a post for from the Philz thread. Use the instructions he provides for Odin installs.
http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4
Related
I changed my mind. How would I hard reset on my android galaxy s4?
I updated my phone to 4.3 while ago, has lot of issues. So I did the custom rom thing/root and such.
How would I factory reset my phone? Odin doesn't seem to work for me. I can't find reliable 4.3 stock firmware on the internet.
Thanks
RanbirS said:
I changed my mind. How would I hard reset on my android galaxy s4?
I updated my phone to 4.3 while ago, has lot of issues. So I did the custom rom thing/root and such.
How would I factory reset my phone? Odin doesn't seem to work for me. I can't find reliable 4.3 stock firmware on the internet.
Thanks
Click to expand...
Click to collapse
What do you mean by factory reset?
It sounds like you want to revert it back to the original state it was in when you bought, which if you've done an update to 4.3 is not a simple factory reset.
Fro stock ROMs you want to look on sammobile.com
re: official 4.2.2 firmware
RanbirS said:
I changed my mind. How would I hard reset on my android galaxy s4?
I updated my phone to 4.3 while ago, has lot of issues. So I did the custom rom thing/root and such.
How would I factory reset my phone? Odin doesn't seem to work for me. I can't find reliable 4.3 stock firmware on the internet.
Thanks
Click to expand...
Click to collapse
The most reliable stock Odin flash Official M919 4.2.2 Galaxy S4 firmware
can be found and downloaded from http://SamMobile.com
You will need to create an account on sammobile to be able to download.
Takes only a minute and it's FREE !!!
Odin works for everyone, if it's not working for you it's due to user error.
You can even download Mobile Odin from the playstore and use that,
Good luck!
Skipjacks said:
What do you mean by factory reset?
It sounds like you want to revert it back to the original state it was in when you bought, which if you've done an update to 4.3 is not a simple factory reset.
Fro stock ROMs you want to look on sammobile.com
Click to expand...
Click to collapse
Teco is a slow download site...
Other than that, how would i restore it? Like a new phone.
Misterjunky said:
The most reliable stock Odin flash Official M919 4.2.2 Galaxy S4 firmware
can be found and downloaded from http://SamMobile.com
You will need to create an account on sammobile to be able to download.
Takes only a minute and it's FREE !!!
Odin works for everyone, if it's not working for you it's due to user error.
You can even download Mobile Odin from the playstore and use that,
Good luck!
Click to expand...
Click to collapse
I got it to restore! I use Kies instead. Now, how do I reset the Knox Warranty void?
Thanks
Does Jovy's rom not work for you?
His has been good so far for me.
Sent from my SGH-M919 using XDA Premium 4 mobile app
re: knox
RanbirS said:
I got it to restore! I use Kies instead. Now, how do I reset the Knox Warranty void?
Thanks
Click to expand...
Click to collapse
You cannot reset the KNOX (at least not yet).
Perhaps at a future date the devs will find a way to do it.
Good luck!
Misterjunky said:
You cannot reset the KNOX (at least not yet).
Perhaps at a future date the devs will find a way to do it.
Good luck!
Click to expand...
Click to collapse
Alright, just curious. Thanks a lot!
Misterjunky said:
You cannot reset the KNOX (at least not yet).
Perhaps at a future date the devs will find a way to do it.
Good luck!
Click to expand...
Click to collapse
Also, is it possible to root on 4.3?
EDIT:
Okay, I rooted it and installed Custom Recovery. Now, how do I remove the, "Kernel is not seandroid enforcing. Set Warranty Bit: kernel"
Thanks.
re: kernel
RanbirS said:
Also, is it possible to root on 4.3?
EDIT:
Okay, I rooted it and installed Custom Recovery. Now, how do I remove the, "Kernel is not seandroid enforcing. Set Warranty Bit: kernel"
Thanks.
Click to expand...
Click to collapse
Simply download and flash Ktoonz kernel in recovery.
Here is the direct download link: http://ktoonsez.jonathanjsimon.com/sgs4/TW/KT-SGS4-JB4.3-TW-TMO-11.14.2013.zip
Thanks for clicking on the "THANKS" button... LOL
Good luck!
RanbirS said:
I got it to restore! I use Kies instead. Now, how do I reset the Knox Warranty void?
Thanks
Click to expand...
Click to collapse
OP, I tried to use Kies to restore my phone back to factory 4.3 but could not get any of the options under tools to work. What steps did you use?
Thanks
peeps67 said:
OP, I tried to use Kies to restore my phone back to factory 4.3 but could not get any of the options under tools to work. What steps did you use?
Thanks
Click to expand...
Click to collapse
Boot your Android to 'Download Mode' (Turn off the device. Then Hold Power, Home, and Volume Down button at once. When you feel vibrate, let go the power button, but keep holding home and volume down button. Then you will get the screen, then select volume up).
Then go to Kies, Under Tools, select the second option (I think it's upgrade, below the emgernecy recovery something).
Then enter your Model Name: (Don't know? Find it by taking off your battery and you will see the information. My model is SGH-M919). Then enter your serial number (same place again). Then follow the steps.
Then it should take you 30 minutes. Then boom, you are done. You are on fresh 4.3.
Hi,
My phone is samsung galaxy note 2 N7100
I bricked my phone when rooting with odin. And now I can only enter the download model, any other is not available. I am not really sure how bad this situation is and I would like to try this method firs (thttp://forum.xda-developers.com/showthread.php?t=2154890). However, I cannot download the recovery package/rom required by that method, link provided has gone.
So if anyone know where I can find this recovery package/rom (a zip including different file like PIT, CSC, MODEM, BOOTLOADER, CODE... ) for my N7100?
Or is there other ways to get my phone back?
I am really desperate now and any thoughts will be appreciated!
Thanks
rikku1983 said:
Hi,
My phone is samsung galaxy note 2 N7100
I bricked my phone when rooting with odin. And now I can only enter the download model, any other is not available. I am not really sure how bad this situation is and I would like to try this method firs (thttp://forum.xda-developers.com/showthread.php?t=2154890). However, I cannot download the recovery package/rom required by that method, link provided has gone.
So if anyone know where I can find this recovery package/rom (a zip including different file like PIT, CSC, MODEM, BOOTLOADER, CODE... ) for my N7100?
Or is there other ways to get my phone back?
I am really desperate now and any thoughts will be appreciated!
Thanks
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=2154890
issameerr said:
Try this : http://forum.xda-developers.com/showthread.php?t=2154890
Click to expand...
Click to collapse
Thanks, and I know this thread but I miss the recovery package/rom mentioned there for GT-N7100, cause the link provided there has gone.
Thank you though!
rikku1983 said:
Thanks, and I know this thread but I miss the recovery package/rom mentioned there for GT-N7100, cause the link provided there has gone.
Thank you though!
Click to expand...
Click to collapse
Did you flash 4.1.2 ? or greater? Try Samsung galaxy note 2 kit.. If you are able to enter the download mode, thats good.. you can flash using Odin or Heimdall. There are many rooted roms that will get you through. Dr Ketans has solutions. Try loading a stock rom from SAmmobile
Let me search for few links and post it from XDA devs
issameerr said:
Did you flash 4.1.2 ? or greater? Try Samsung galaxy note 2 kit.. If you are able to enter the download mode, thats good.. you can flash using Odin or Heimdall. There are many rooted roms that will get you through. Dr Ketans has solutions. Try loading a stock rom from SAmmobile
Let me search for few links and post it from XDA devs
Click to expand...
Click to collapse
I actually have several roms in hand and I tried
1 Pre-Rooted Stock ROMs Samsung Latest Sammy NA dr.ketan
2 N7100 Odin STOCK leaked 4.3 version (http://forum.xda-developers.com/showthread.php?t=2466405)
Neither can get me through, seconds after start of flashing, it fails.
So I worry a little about my situation...
But I will keep trying and thank you!
rikku1983 said:
I actually have several roms in hand and I tried
1 Pre-Rooted Stock ROMs Samsung Latest Sammy NA dr.ketan
2 N7100 Odin STOCK leaked 4.3 version (http://forum.xda-developers.com/showthread.php?t=2466405)
Neither can get me through, seconds after start of flashing, it fails.
So I worry a little about my situation...
But I will keep trying and thank you!
Click to expand...
Click to collapse
Dont flash 4.3.. Is your phone recognized by Odin, if yes, install Adb and try to push the rom and also check this : http://forum.xda-developers.com//showthread.php?t=1463756 and post your messages after DMESG|TAIL and LOGCAT..
issameerr said:
Dont flash 4.3.. Is your phone recognized by Odin, if yes, install Adb and try to push the rom and also check this : http://forum.xda-developers.com//showthread.php?t=1463756 and post your messages after DMESG|TAIL and LOGCAT..
Click to expand...
Click to collapse
Thank you bro, my phone is back. I think the problem might be odin3.07, cause I changed to odin1.3, flash stock 4.3 rom, it went through!
rikku1983 said:
Thank you bro, my phone is back. I think the problem might be odin3.07, cause I changed to odin1.3, flash stock 4.3 rom, it went through!
Click to expand...
Click to collapse
Cool.. Thats nice
I just got another Note 2 with the darn 4.3 and KNOX!
If I just want to install philz and a SynergyROm for 4.3, must I root ??
Thx!
Here's what you do. ..
1. Odin a recovery of choice.
2. Flash Billiards412 Rom restore . This removes Knox but doesnt reset knox.
3. Odin a recovery again of your choice. Since it gets removed
4. Flash Synergy.
flynhawn2002 said:
Here's what you do. ..
1. Odin a recovery of choice.
2. Flash Billiards412 Rom restore . This removes Knox but doesnt reset knox.
3. Odin a recovery again of your choice. Since it gets removed
4. Flash Synergy.
Click to expand...
Click to collapse
I got as far as step 2, falshing 412, with philz. Now its bootlooping....and I cant seem to do anything. Pulling the battery doesnt help, it just does the same bootloop sequence when battery is reinserted.
rosystreasures said:
I got as far as step 2, falshing 412, with philz. Now its bootlooping....and I cant seem to do anything. Pulling the battery doesnt help, it just does the same bootloop sequence when battery is reinserted.
Click to expand...
Click to collapse
Ok, called samsung and the phone is all good...at 4.1.2.!!!
Am I not to root now?
Just odin Philz, or twrp and flash the synergyrom zip??
cant be THAT easy...please let me know..
That is correct........ Flash the Synergy Rom then you will be rooted. Enjoy!
Yes.....it's that easy! Enjoy!
flynhawn2002 said:
Non you are not rooted yet. Flash the Synergy Rom then you will be rooted. Enjoy!
Click to expand...
Click to collapse
Just to let you know, I want to flash the 4.3 synergyrom....the rom with the note 3 features...
sorry, just a little scared since I bootlooped!
rosystreasures said:
Just to let you know, I want to flash the 4.3 synergyrom....the rom with the note 3 features...
sorry, just a little scared since I bootlooped!
Click to expand...
Click to collapse
WOW, ok, that was EASY!
THX!!!
rosystreasures said:
WOW, ok, that was EASY!
THX!!!
Click to expand...
Click to collapse
Yes one of the joys of the phone not being locked down tight. I have had multiple htc phones and they were a pain. This was my first samsung and i have to say it is easy.
Only thing is when flashing new roms you will wont to make sure to wipe/format internal sdcard. For more info check out the guide in general section. http://forum.xda-developers.com/showthread.php?p=50335424 While titled as 4.3 and 4.4 the steps should be used for all rom installs. Although the back to stock method is not allways required.
Sent from my SPH-L900 using XDA Premium 4 mobile app
I have a big problem with my Note 2.
It is completely frozen at the Galaxy Note screen when it very first turns on. It also freezes at the rotating circle when I plug it in to the charger.
I can access Download/ODIN Mode. I have tried flashing 4.3 again, Odin succeeded but it changed nothing.
I have tried and can not access recovery mode before/after the 4.3 flash.
I have a feeling I'm completely screwed, buy maybe not? What can I do?
Thanks!
iDylan1357 said:
I have a big problem with my Note 2.
It is completely frozen at the Galaxy Note screen when it very first turns on. It also freezes at the rotating circle when I plug it in to the charger.
I can access Download/ODIN Mode. I have tried flashing 4.3 again, Odin succeeded but it changed nothing.
I have tried and can not access recovery mode before/after the 4.3 flash.
I have a feeling I'm completely screwed, buy maybe not? What can I do?
Thanks!
Click to expand...
Click to collapse
Quickest easiest thing to try is flash (via ODIN) a custom recovery. TWRP or CWM, doesn't matter.
dicksteele said:
Quickest easiest thing to try is flash (via ODIN) a custom recovery. TWRP or CWM, doesn't matter.
Click to expand...
Click to collapse
Yes, I tried this too. Did not work.
Also, (I bought this off a friend btw), in download mode it says Knox Warranty Void: 1
what's this mean?
dicksteele said:
Quickest easiest thing to try is flash (via ODIN) a custom recovery. TWRP or CWM, doesn't matter.
Click to expand...
Click to collapse
iDylan1357 said:
Yes, I tried this too. Did not work.
Also, (I bought this off a friend btw), in download mode it says Knox Warranty Void: 1
what's this mean?
Click to expand...
Click to collapse
It means Knox security that was implemented detected something it did not like. Like maybe rooting.
Really not to much of a deal since warranty is probably not an option for you since you got it from someone else.
On my phone and not a lot of time. In this forum find a thread by me about getting to MK6 OTA via 4.1.1 stock.
I think it's post #2 that talks about param/tz file. Download that and flash via ODIN
That should work
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Is there a way to recover the note 4 from a hard brick
and I'm not talking about a soft brick like reboots constantly, the phone won't boot up properly, reboots only to recovery/download mode, ect...
I'm talking about the hard brick that leaves your phone completely useless
phone wont boot up AT ALL, charging/changing the battery won't work, and when you connect the phones to the computer, it says "QHUSB_BULK" or “Qualcomm HS-USB QDLoader 9008”
It wont recognize the phone AT ALL
Is there a fix to bring the phone to at least download mode or recovery mode?
I'm asking because i have done an endless research on "how to recover from a hard bricked android phones"
sadly, i only found the solution for fastboot devices
Is there a method to recover it?
Maybe. Checkout this post.
http://forum.xda-developers.com/showpost.php?p=68342242&postcount=939
I already been through those websites
Those websites are best for fastboot devices
I looked up unbrick images after i saw the galaxy s3 have an unbrick image
So i called my friend who has a hard bricked AT&T s3
So we use that method, and surprisingly it worked
So i went on a rampage and looked up unbrick images for note 4
I couldn't find unbrick images for the N910A variant
Is there a way to make an unbrick image for the AT&T note 4?
AlexanderDAB said:
I already been through those websites
Those websites are best for fastboot devices
I looked up unbrick images after i saw the galaxy s3 have an unbrick image
So i called my friend who has a hard bricked AT&T s3
So we use that method, and surprisingly it worked
So i went on a rampage and looked up unbrick images for note 4
I couldn't find unbrick images for the N910A variant
Is there a way to make an unbrick image for the AT&T note 4?
Click to expand...
Click to collapse
Not sure why the steps on droidsavvy.com would work better for a fastboot device vs a Samsung device. As for an unbrick image for AT&T's Note 4 I don't think so as I think it would require root to do.
AlexanderDAB said:
I already been through those websites
Those websites are best for fastboot devices
I looked up unbrick images after i saw the galaxy s3 have an unbrick image
So i called my friend who has a hard bricked AT&T s3
So we use that method, and surprisingly it worked
So i went on a rampage and looked up unbrick images for note 4
I couldn't find unbrick images for the N910A variant
Is there a way to make an unbrick image for the AT&T note 4?
Click to expand...
Click to collapse
What was last good working firmware on phone before brick ?
Kyuta Syuko said:
Not sure why the steps on droidsavvy.com would work better for a fastboot device vs a Samsung device. As for an unbrick image for AT&T's Note 4 I don't think so as I think it would require root to do.
Click to expand...
Click to collapse
ohh
norbarb said:
what was last good working firmware on phone before brick ?
Click to expand...
Click to collapse
n910aucu2doi2
AlexanderDAB said:
n910aucu2doi2
Click to expand...
Click to collapse
Did you try ODIN back to this firmware? If you did and problem still exist that mean just one thing that internal storage is corrupted. You can try find PIT file for ATT note 4 and try odin back again DOI2 firware with pit file.
Edit : here http://forum.xda-developers.com/note-4-att/general/trlteusaatt-pit-t3085542
norbarb said:
Did you try ODIN back to this firmware?
Click to expand...
Click to collapse
i did but then i flashed N910AUCU2COC6 which is still able to downgrade then after it was done, it wouldn't boot up at all
AlexanderDAB said:
i did but then i flashed N910AUCU2COC6 which is still able to downgrade then after it was done, it wouldn't boot up at all
Click to expand...
Click to collapse
Odin back to DOI2 all 4 files with pit. COC6 have diffrent bootloader that why tou can't boot at all. Do not flash COC6.
norbarb said:
Odin back to DOI2 all 4 files with pit. COC6 have diffrent bootloader that why tou can't boot at all. Do not flash COC6.
Click to expand...
Click to collapse
umm....
i can't boot into anything
Download mode, Nope
Recovery mode, Nope
Any signs of life, Nope
AlexanderDAB said:
umm....
i can't boot into anything
Download mode, Nope
Recovery mode, Nope
Any signs of life, Nope
Click to expand...
Click to collapse
Now i'm sorry i can't help you. I'm not that knowlage about. It happend after you flash COC6 firmware? If yes that because bootloader. If not is do to internal memoru corruption.
norbarb said:
Now i'm sorry i can't help you. I'm not that knowlage about. It happend after you flash COC6 firmware? If yes that because bootloader. If not is do to internal memoru corruption.
Click to expand...
Click to collapse
alright, i will see if i can go into research for that
Kyuta Syuko said:
Not sure why the steps on droidsavvy.com would work better for a fastboot device vs a Samsung device. As for an unbrick image for AT&T's Note 4 I don't think so as I think it would require root to do.
Click to expand...
Click to collapse
what is needed to make an unbrick image?
i want to know so i can do some research on it
AlexanderDAB said:
what is needed to make an unbrick image?
i want to know so i can do some research on it
Click to expand...
Click to collapse
I honestly don't know, but if I had to take a guess it would be akin to a disk copy (via the dd command or something that works the same) of a (preferably) stock phone, but like I said I'm no expert and was just passing on information I thought might be useful to the op.
AlexanderDAB said:
what is needed to make an unbrick image?
i want to know so i can do some research on it
Click to expand...
Click to collapse
For Qualcomm 9008, you need to repair the bootloader to enter download mode again, then you are good
N910aucu2doi2 stock rom
I am new here where can i download those 4 D012 files?
norbarb said:
Odin back to DOI2 all 4 files with pit. COC6 have diffrent bootloader that why tou can't boot at all. Do not flash COC6.
Click to expand...
Click to collapse
5tephen said:
I am new here where can i download those 4 D012 files?
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-att/general/marshmellow-att-server-link-installation-t3407308
trihcpsci said:
For Qualcomm 9008, you need to repair the bootloader to enter download mode again, then you are good
Click to expand...
Click to collapse
how do i repair it?
if anyone can help with this we need working phone follow these steps and post the unbrick file here, take a look at this http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar you will need this also http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar password for this is daseul123