[Q] help help help - Galaxy Tab 3 Q&A, Help & Troubleshooting

Hi I know I ask a lot of questions but I'm working on a ROM based off another ROM yes the creator let me use it but on to the question now I'm trying to add some build.prop/init.d scripts but it doesn't have init.d but it does have busybox so does anyone know how to add it with out exstacting boot.img and kernel pose help

hey
dsilx said:
Hi I know I ask a lot of questions but I'm working on a ROM based off another ROM yes the creator let me use it but on to the question now I'm trying to add some build.prop/init.d scripts but it doesn't have init.d but it does have busybox so does anyone know how to add it with out exstacting boot.img and kernel pose help
Click to expand...
Click to collapse
d,
you have two choices
1 http://forum.xda-developers.com/showthread.php?t=2287540
2 switch to a kernel/boot.img with init.d support already enabled
3 get osm0sis' AIK suite http://forum.xda-developers.com/showthread.php?t=2073775
[bleeping kickass tool!]
m

thank u so much
moonbutt74 said:
d,
you have two choices
1 http://forum.xda-developers.com/showthread.php?t=2287540
2 switch to a kernel/boot.img with init.d support already enabled
3 get osm0sis' AIK suite http://forum.xda-developers.com/showthread.php?t=2073775
[bleeping kickass tool!]
m
Click to expand...
Click to collapse
Thank u so much I wasn't thinking of doing any of those but ima try them before I revert to using the previous version @moonbutt74 u have been so much help since I started this ROM

Related

[Q] [HELP] ROM NOT WORKING - installation aborts

I have ported a rom for galaxy y. but when i try to install it. It shows installation aborted
any one pls help me.......
ROM's LINK
LINK UPDATED SOON.................................
I use HTC Android kitchen and cygwin
........................................................................................
i dont know about update script. plsssss HELPPP
U have to make a thread in general sec
Use CWM or another updater-script.
this question is about developing a new rom. IMO its ok to post here.
@dineshlives: did you use dsixdia kitchen? if yes, you should modify the script. the script generated by dsixdia doesn't work for SGY. if you only have minor modification (without custom kernel or a2sd) you may check hybrid's or myss's script. if you use custom kernel or a2sd. you may see bazz's, or repencis's. those two last is harder to use and may not work. but both hybrid's or myss's works fine without any modification as long as you don't touch /system/bin and /system/xbin.
HELP
kurotsugi said:
this question is about developing a new rom. IMO its ok to post here.
@dineshlives: did you use dsixdia kitchen? if yes, you should modify the script. the script generated by dsixdia doesn't work for SGY. if you only have minor modification (without custom kernel or a2sd) you may check hybrid's or myss's script. if you use custom kernel or a2sd. you may see bazz's, or repencis's. those two last is harder to use and may not work. but both hybrid's or myss's works fine without any modification as long as you don't touch /system/bin and /system/xbin.
Click to expand...
Click to collapse
I dont know much about script
pls help me
can u provide link for the script.................
plssssssss help im new for developing roms
tell me...what feature do you want to be added in your rom?
dineshlives said:
I dont know much about script
pls help me
can u provide link for the script.................
plssssssss help im new for developing roms
Click to expand...
Click to collapse
open their roms and copy the scripts from META-INF folder
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
hell_lock said:
open their roms and copy the scripts from META-INF folder
Click to expand...
Click to collapse
thats not enough...he should copy /system/bin and /system/xbin too.
kurotsugi said:
thats not enough...he should copy /system/bin and /system/xbin too.
Click to expand...
Click to collapse
wow ty fr tellin dat..
which type of rom it is
Custom obviously!
Sent from my AURORA ULTRA GT-S5360 through XDA Premium Customized by Androhacker Xavier
What you have to do (keeping in mind that you are new) is take boot.img of some other rom.
Sent from my AURORA ULTRA GT-S5360 through XDA Premium Customized by Androhacker Xavier
Just make it flashable
kurotsugi said:
tell me...what feature do you want to be added in your rom?
Click to expand...
Click to collapse
just make the rom flashable
Its a sony ericsson xperia mod for sgy
somkll said:
which type of rom it is
Click to expand...
Click to collapse
Its a sony ericsson xperia mod for sgy
I've made a guide to customize or make a new rom. you may check it on dev section.

[Q] create a rom and zipalign and superchargerv6

Hi, i have some questions, i couldn't find much in forum.
-Can init.d is used in ICS 4.0.4 (fw.50) with this guide? http://forum.xda-developers.com/showthread.php?t=1547238
-How to use Zipalign at every boot?
-v6 supergharger is useful?
- Could you give me some explanation o guides?
Ty very much every body and sorry for my English.
ps: a little guide to create a Rom?
stibuz95 said:
Hi, i have some questions, i couldn't find much in forum.
-Can init.d is used in ICS 4.0.4 (fw.50) with this guide? http://forum.xda-developers.com/showthread.php?t=1547238
-How to use Zipalign at every boot?
-v6 supergharger is useful?
- Could you give me some explanation o guides?
Ty very much every body and sorry for my English.
ps: a little guide to create a Rom?
Click to expand...
Click to collapse
Why do you need to zip align every time.Need to zipalign an app only once.
anyways here is the script.
Unzip it and copy it to /system/etc/init.d and give it executable permissions. Look at the permissions of the other script and make this one the same.
For V6 supercharge ... look into the V6 supercharg post for guide.
There are lots of ROM creating Guides. Just search in XDA forums and you will get plenty.
What you dont understand is that its not so simple to follow a guide to make your own rom, because then its not really yours. Start off with getting someones else's rom and doing little mods to it. Just think: what would make the rom better? Say for example yopu might do some speed improvements, then maybe beats audio, then maybe some android 4.2 apps, etc. Once you have enough new things then you can make your own thread.
PS: googling stuff always helps
Just adding mods to a stock rom isnt really a new rom
w3nZ said:
Just adding mods to a stock rom isnt really a new rom
Click to expand...
Click to collapse
Then what are stock based roms? Look at UHD, sparta charge, x gamer, acroniam, jelly sandwhich. They're just stock that's been modded, tweaked and rooted.
But they´re still defferent to a stock rom with some mods of the modding section.
U cant pick 5 mods and call it a new custom rom.
Check out the ROM "cyano bean" its a entirely different ROM to cm10 yet look at my quote:
JackJoeR said:
Hi, this is a ROM heavily based on the work of FXP
I wanted to share the ROM I put together for my own personal use (so I didn't have to flash lots of individual things) and wanted to share it with the community, as it is a very fast ROM (no thanks to me)
So to start with I am no developer, I have not made any of the things included in this ROM apart from adding a few tweaks to the build.prop
I merely compiled lots of different things and put them into this in the hope people in the community will enjoy
Click to expand...
Click to collapse
ganeshbiyer said:
Why do you need to zip align every time.Need to zipalign an app only once.
anyways here is the script.
Unzip it and copy it to /system/etc/init.d and give it executable permissions. Look at the permissions of the other script and make this one the same.
For V6 supercharge ... look into the V6 supercharg post for guide.
There are lots of ROM creating Guides. Just search in XDA forums and you will get plenty.
Click to expand...
Click to collapse
Thanks for the zip align! Though doesn't it require a file in system -> bin?

[XS][Kernel][STOCK+] V5.4.1OC [14-03-13] Recovery Independent!!

For those who have an UNLOCKED boot loader.
Kernel Stock+ is
= Sony latest ICS .55 kernel base
+ Auto-root with SuperSU
+ Init.d
+ Governor : Badass, Intellidemand, Interactive, Lagfree, Hotplug, Wheatley
+ I/O schedule : SIO, ROW, ZEN
+ elf extract (support recovery in FOTA partiton)
+ few tweak
+ OC to 1674Mhz(some version)
Stock+ V5.4.1 (OC)
- Over clock again to 1674MHz
- Port few lib, optimize from Open SEMC kernel
- Omit smartassv2 it cause my phone stuck at max frequently.
http://www.mediafire.com/download.php?hsma936uzlasgao
Stock+ V5.3 (Not OC)
http://www.mediafire.com/download.php?ohybzjcfu1ad6hc
- Update recovery TWRP 2.4.1
- Support elf extract so you are no longer tie to TWRP 2.4.1. Now you can update TWRP to the latest version or even install CWM. Check http://forum.xda-developers.com/showthread.php?t=2173202
- Fix Auto Root
- Remove PeqasusQ
- Add Lagfree, Hotplug, Wheatley
Stock+ V5.2 (Enable to Over Clock to match XSL speed)
http://www.mediafire.com/?4n0n5b04g76h8ew
- Change max frequency to 1674MHz
- Change RAM Disk to limit max frequency at 1512MHz
Stock+ V5.1 (update TWRP to V2.3.3.0)
http://www.mediafire.com/?ehkzz5lb59zgbxd
- New ramdisk structure. Now ramdisk split into two 1st for recovery and 2nd for Stock ICS boot.
- 1st ramdisk is ported from http://forum.xda-developers.com/showthread.php?t=2075562.
- 2nd ramdisk is exacted from sony stock kernel.sin merge with ramdisk from Advance Stock Kernel this should retain "autoroot" function and "init.d" support
Stock+ V2
link : http://www.mediafire.com/?vzpj4b6kpoa5zsl
This kernel feature
- build from .55 source + fix cache formatting issue
- little mod ram disk to set minimum frequency at 192000
- on demand tweak for better battery life.
- autoroot with superSU
- Xperia boot screen
Stock+ V1
Link : http://www.mediafire.com/?5sb5352k7pz5lc5
It is unmodified STOCK kernel extract from .55 kernel.sin plus CWM with auto root functionality.
I made a little mod to ramdisk to make it auto root with SuperSU instead of Superuser. The wifi module also replace with the one from stock firmware as well. The wifi module in Advance stock Kernel is not compatible with this kernel.
The kernel work just fine but I notice some bug when I try to format cache or wipe cache it will cause your cache partition corrupt. So if you like to use unmodified stock kernel please remember NOT wipe or format cache.
Well if you already wipe/format and want to get around the problem just simply install other kernel e.g. advance stock ICS17 or my stock mod kernel list above then format cache after that reinstall unmodified stock or you can leave it as it is.
Note.
- 28/01/13 : just found a bug regarding to setcpu and antutu set at boot not appear to set both core correctly. Please give No-frills CPU control or Kernel tuner a try but remember not to use with pagasusq.
- To install by fastboot just extract kernel.elf from the zip.
- Source is outdate because I can not upload a big file. I will update source as soon as I get proper internet connection.
- Now you can update TWRP to the latest version using goo.manager or even install CWM. Check http://forum.xda-developers.com/showthread.php?t=2173202
Feedback is appreciate.
Source :
- kernel http://www.mediafire.com/?b0nga11uw2syw2s
- 2nd Ramdisk http://www.mediafire.com/?9s7059o8g7fxubo
Credit :
championswimmer, Arakmar, cobrato
Mericon, DorimanX, Faux123, krabappel2548, Open SEMC
Can you make a flashable zip
Sent from hell using Xperia-S(atan)
mrsatan said:
Can you make a flashable zip
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
Sorry, I do not have enough knowladge. I'm just a noob. If you can point me to the right direction I will try to make it.
tosa.th said:
Sorry, I do not have enough knowladge. I'm just a noob. If you can point me to the right direction I will try to make it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1904615
You can use an existing kernel zip and add this to it.
Sent from hell using Xperia-S(atan)
Xsx version 6 is a good one to use
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
please verify and confirm..this flashable zip i made is composed of .55 firmware stock kernel, cwm and supersu v.97
I would used it if you used Superuser but you used SuperSU which is not so used friendly as Superuser.
jemju_xps-user said:
please verify and confirm..this flashable zip i made is composed of .55 firmware stock kernel, cwm and supersu v.97
Click to expand...
Click to collapse
I think this is different mate. The one you provide is not the real recovery. This is the same way people use for Locked boot loader. The recovery is locate in "system". If you format system you will loose it or if you install new ROM which has script to format system you probably loose recovery!!
Mine the recovery is not in system partition. It is loaded in ramdisk. You won't loose it even you format system.
Cheers.
tosa.th
darkerm said:
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
Click to expand...
Click to collapse
I disagree dude, SuperSU is way cool and easier and the eye""
Sent from South Africa using Sony Xperia S
darkerm said:
Can you make one with SuperUser please?
SuperSU is not much user friendly as Superuser :'(
Click to expand...
Click to collapse
darkerm said:
I would used it if you used Superuser but you used SuperSU which is not so used friendly as Superuser.
Click to expand...
Click to collapse
I did it but for now it is in elf format. Please check first post.
You probably not need it because if you already rooted with ICS16 which come with superuser then the kernel will not reroot your system.
I'm still learning, could you please explain or give me some info about how you find user friendly of superuser? I read around here and lot of people said supeSU is quicker.
Cheers,
tosa.th
I am not a Dev but since my 1st Xperia NEO I have always used Superuser. I only once used SuperSu and its was last night When I was looking for a way to Root .55 of my Xperia S.
The used Interface it kinda messy and had a lot of option but in Superuser it just a few thing and easy to understand.
I don't know about others but As far as I know and Experienced most of the xperia user and even my friend use Superuser instead of supersu.
mrsatan said:
http://forum.xda-developers.com/showthread.php?t=1904615
You can use an existing kernel zip and add this to it.
Sent from hell using Xperia-S(atan)
Xsx version 6 is a good one to use
Click to expand...
Click to collapse
It easy more than what I thought. I spent hours messing around with zImage within cwm flash-able zip of ICS16.
Finally I figure it out. Please try the CWM version of this stock kernel in first post.
Cheers,
tosa.th
tosa.th said:
It easy more than what I thought. I spent hours messing around with zImage within cwm flash-able zip of ICS16.
Finally I figure it out. Please try the CWM version of this stock kernel in first post.
Cheers,
tosa.th
Click to expand...
Click to collapse
Testing now, so far all OK. Flashing worked, rebooted OK.
Sent from my LT26i using xda premium
darkerm said:
I am not a Dev but since my 1st Xperia NEO I have always used Superuser. I only once used SuperSu and its was last night When I was looking for a way to Root .55 of my Xperia S.
The used Interface it kinda messy and had a lot of option but in Superuser it just a few thing and easy to understand.
I don't know about others but As far as I know and Experienced most of the xperia user and even my friend use Superuser instead of supersu.
Click to expand...
Click to collapse
Supersu owns super user. Chainfire is the man
Sent from hell using Xperia-S(atan)
Someone needs to make a kernel with twrp. Anyone have a good kernel tutorial. I'll look into it.
Sent from hell using Xperia-S(atan)
mrsatan said:
Someone needs to make a kernel with twrp. Anyone have a good kernel tutorial. I'll look into it.
Sent from hell using Xperia-S(atan)
Click to expand...
Click to collapse
You may start from the link in my first post. It is for Acro S but it should give you an idea. There is an instruction in page 5.
I use kernel kitchen to unpack and repack kernel.
Cheers,
Tosa.th
tosa.th said:
You may start from the link in my first post. It is for Acro S but it should give you an idea. There is an instruction in page 5.
I use kernel kitchen to unpack and repack kernel.
Cheers,
Tosa.th
Click to expand...
Click to collapse
Cool, ill take a look when i get some time. Is kernel kitchen only for linux?
mrsatan said:
Cool, ill take a look when i get some time. Is kernel kitchen only for linux?
Click to expand...
Click to collapse
It suppose to work on windows but you will need cgywin. You also need some other software like phyton 7zip java etc. If you have Linux then it will be easy to install all those software.
Great work.
I have a unlock bootloader and Whit this kernel there is an increase of performance.
Now i have the stock. 55 and Whit the antutu and i have 8390
Whit cm10 i have 8900. I think this is a Great kernel.
Hi, I've just added this kernel to the Xperia S Development Index
Sent from my GT-I9100 using xda premium

[Q] init.d folder not found/cannot be created on my wildfire s

Hello there,
I am using the stock rom,rooted and bootloader unlocked, i want to flash custom kernel(Dust 9.0) but i cannot locate the init.d folder at system/etc.... What can be the problem?
Any help is appreciated...
Berat1337 said:
Hello there,
I am using the stock rom,rooted and bootloader unlocked, i want to flash custom kernel(Dust 9.0) but i cannot locate the init.d folder at system/etc.... What can be the problem?
Any help is appreciated...
Click to expand...
Click to collapse
stock rom dosent have inbuilt init.d support.
crossfire77 said:
stock rom dosent have inbuilt init.d support.
Click to expand...
Click to collapse
so what can i do in order to flash the kernel that i mentioned before to my stock rom ?
Berat1337 said:
so what can i do in order to flash the kernel that i mentioned before to my stock rom ?
Click to expand...
Click to collapse
i think you can use that kernel without init.d support..like i know that kernel have 88performance script but it's only for set min and max frequency and governer.
anyways for safe side if you need i have made stock roms with init.d support..check my signature..you will find many times of stock roms which have init.d support.
edit: you can use this thread to add init.d support in rom,it didnt worked for me but you can try it.
http://forum.xda-developers.com/showthread.php?t=1933849
crossfire77 said:
i think you can use that kernel without init.d support..like i know that kernel have 88performance script but it's only for set min and max frequency and governer.
anyways for safe side if you need i have made stock roms with init.d support..check my signature..you will find many times of stock roms which have init.d support.
edit: you can use this thread to add init.d support in rom,it didnt worked for me but you can try it.
http://forum.xda-developers.com/showthread.php?t=1933849
Click to expand...
Click to collapse
Thank you, will check up on it

[Q] T211 Mods and Speed

Hi all I have a T211. What modifications and mods do you recommend? So far I have deleted samsung mess.
Send by T211
WHITE-CZ said:
Hi all I have a T211. What modifications and mods do you recommend? So far I have deleted samsung mess.
Send by T211
Click to expand...
Click to collapse
You have already rooted I guess since you've already deleted samsung apps. We don't have much ROM choices so all I did was stock, root, debloat, flash blackhawk kernel, and use xposed modules for further modding like xhalofloatingwindow and other modules like Xblast or Gravitybox for theming. Also deleted not needed apps in startup (using ROM Toolbox) and Greenify apps. Don't use themes since I have yet to find a full theme.
Use betterbatterystat to get a better picture of what process are eating your batter up.
Good luck
Make sure power-saving mode is turned off. Otherwise, Nova Launcher + Dolphin >> TouchWiz launcher + Chrome.
Looks like you need a Custom ROM !
Sent from my room mate's computer
What you recommend?
build.prop
Hi if u would like i can post a list of build.prop tweaks to speed up and reduce ram and battwry usage and other stuff all better image viewing etc
it would be the same list i have on my custom rom posted up here to help it run better
dsilx said:
Hi if u would like i can post a list of build.prop tweaks to speed up and reduce ram and battwry usage and other stuff all better image viewing etc
it would be the same list i have on my custom rom posted up here to help it run better
Click to expand...
Click to collapse
And where your ROM download?
sorry
WHITE-CZ said:
And where your ROM download?
Click to expand...
Click to collapse
Hi im sorry i wasent paying attention to the title now i would give u my rom but it is for t210r/t210 but the build.prop tweaks i added are able to ran on all devices so if u want i could copy then to a txt and put then on android file host along with how to put them in the build.prop if u dont know hoe
dsilx said:
Hi im sorry i wasent paying attention to the title now i would give u my rom but it is for t210r/t210 but the build.prop tweaks i added are able to ran on all devices so if u want i could copy then to a txt and put then on android file host along with how to put them in the build.prop if u dont know hoe
Click to expand...
Click to collapse
And it will work right on the T211?
yes
WHITE-CZ said:
And it will work right on the T211?
Click to expand...
Click to collapse
The rom sorry it wont but the buikd.prop tweaks will work on all devices
dsilx said:
The rom sorry it wont but the buikd.prop tweaks will work on all devices
Click to expand...
Click to collapse
So ok I'll try it
better
QUOTE=WHITE-CZ;53390646]And it will work right on the T211?[/QUOTE]
Hi i found a post that looks like it holds alot more tweaks
http://forum.xda-developers.com/showthread.php?t=2360670 if they help plse thank the dev who posted it
Hope i could help
Be warned with build.prop editing !
It can make your Tab completly UNUSABLE.
About ROMs for Tab 3 Lite, see in Tab 3 7.0 Development Forum instead.
Don't flash a Tab 3 7.0 Rom onto a Tab 3 Lite or else your Tab may NOT boot even if both devices have more similar HW.
Sent from Gallifrey using TARDIS

Categories

Resources