Develop Bugs

Matte Full Body Cover advice

Hello, which matte full body cover would you recommend for HOX? I'm using PhantomSkinz Matte Full Body Kit on Sensation but, I could not apply it properly I think and had some problems at the corners. You can find nearly 1 year old cover photos below. Your info and recommendations are much appreciated. Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It looks really bad!
get a real cover or leather pouch

vegetaleb said:
It looks really bad!
get a real cover or leather pouch
Click to expand...
Click to collapse
You are right but, I prefer to use the phone with nearly original appearance. My main concern is to prevent the device from scratches. Due to material of the body, scratches should not be much visible I think. If I could not find good matte full body cover, maybe would prefer to use screen protector only.

In reality the HOX back has a matt layer that wear off with time (table contact)
I never used a cover before (N1,DHD,Sensation) but the HOX yes

vegetaleb said:
In reality the HOX back has a matt layer that wear off with time (table contact)
I never used a cover before (N1,DHD,Sensation) but the HOX yes
Click to expand...
Click to collapse
I like the matte looking on phones but, as you say, even holding the HOX after time makes it's body to turn from matte to shiny. Actually, just relizaed that with matte body cover will keep the matte looking also

I think that with time all plastic covers got that look. Edges peel off and loses the original transparency. I saw it with ArmoredShield.
Sent from my GT-I9100 using xda app-developers app

emptyness said:
I think that with time all plastic covers got that look. Edges peel off and loses the original transparency. I saw it with ArmoredShield.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
You are right unfortunately but it is the best way to protect the device without adding bulk IMO.
I have found following matte full body covers for HOX.
Phantom Skinz Matte Full Body Kit
Phantom Skinz Matte Full Body Kit for Sensation offered 1 matte body cover, 1 clear screen protector and 1 matte screen protector (received 2 for 1 due to their Internet Special). I applied clear screen protector and it covered the screen pretty good, there is about 0.5 mm space to some of the edges but it is due to my installation I think. Could not find any reviews for HOX though.
SPIGEN SGP Ultra Matte Shield Full Body Protection film
I read here that SGP screen protector does not cover whole screen. I am not sure if Steinheil Olephobic LCD film, included in above mentioned SGP kit, also does not cover whole screen. Also, do not know if Steinheil Olephobic LCD film is matte or clear.

The oleophobic scree protector dosent cover the whole screen. It is a clear screen protector not matte
Sent from my HTC One X using xda premium

When you remove this cover it will mess up the color of the phone.
DJouneyt said:
Hello, which matte full body cover would you recommend for HOX? I'm using PhantomSkinz Matte Full Body Kit on Sensation but, I could not apply it properly I think and had some problems at the corners. You can find nearly 1 year old cover photos below. Your info and recommendations are much appreciated. Thanks in advance.
Click to expand...
Click to collapse

venustraphobic said:
When you remove this cover it will mess up the color of the phone.
Click to expand...
Click to collapse
Actually, I cutted the peeled edges shown in the first and last picture with a blade, a couple of months after the application. There is not any difference in comparison with the original body surface.
By the way, I have just contacted with Phantom Skinz CR by the Live Chat, and the representative declared that the screen protectors for HTC One X cover the whole screen, just as the HTC Sensation.
Screen protector size of Phantom Skinz would be okay I think but the body cover would suck again after the application because it is unibody designed as the one for Sensation. I have not tried SGP, their body cover design is different from Phantom Skinz' and SGP screen protector does not cover the whole screen. Hard to decide

DJouneyt said:
Actually, I cutted the peeled edges shown in the first and last picture with a blade, a couple of months after the application. There is not any difference in comparison with the original body surface.
By the way, I have just contacted with Phantom Skinz CR by the Live Chat, and the representative declared that the screen protectors for HTC One X cover the whole screen, just as the HTC Sensation.
Screen protector size of Phantom Skinz would be okay I think but the body cover would suck again after the application because it is unibody designed as the one for Sensation. I have not tried SGP, their body cover design is different from Phantom Skinz' and SGP screen protector does not cover the whole screen. Hard to decide
Click to expand...
Click to collapse
The SGP oleo screen protectors may not cover the entire screen but its hardly noticeable.
Sent from my AT100 using xda premium

What glass screen protector and where to buy?

Hey guys I wanted a just like glass screen protector and amzer and SGP ones are out if stock only one I could find is siedio but seems expensive. Any ideas where or which to get? Thanks
Sent from my SCH-I535 using Tapatalk 2

I would spend the money on the spigen glas.t but according to this forum it has been discontinued:
http://forum.xda-developers.com/showthread.php?t=1929381
I didn't read the full thing, i just googled it. But i will say this, I dropped my iPad 3 face down(glass down) on concrete and it protected it. It fell about 4 feet and came out without any damage whatsoever.

thrgk said:
Hey guys I wanted a just like glass screen protector and amzer and SGP ones are out if stock only one I could find is siedio but seems expensive. Any ideas where or which to get? Thanks
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I swear by ZAGG. If you watch the demo video then it should sell you too. Yes its a little more expensive than the 3 dollar scotch tape cover you can get at the grocery store, but you spent a lot of money on the phone with its sharp screen, I figure its worth it. I had the ZAGG cover on my Thunderbolt and it worked great. I liked it so much I have one on my GS3.

DBA Cases sells a screen protector called "Just Like Glass". I just bought one for me and my mom. I must say the feel is great, almost "like glass" and the screen doesn't diminish in quality one bit. It is a wet application. The sides on mine don't want to stick down all the way. The instructions said this would happen and after a few days it will stick. I've only had it applied a couple days so I'm still crossing my fingers. They are only $13.50. I would definitely recommend one. http://www.dbacases.com/samsung-galaxy-s3-screen-protectors.aspx

I highly suggest glasszone. No proximity problems, no response problems. 9H hardness, I've dropped it twice from waist height on concrete floor and it's not scratched, though I'm not 100% if the initial impact was with ground. The only thing I have against it is the (barely) visible layer of glitter on the edges, or what the manufacturer calls "pearl effect". I barely notice it, and it's only really visible under a few instances. You can find it on ebay

iMuse glass protector could be a good solution:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.slickfans.com/imuse-tempered-glass-screen-protector-for-galaxy-s3-04mm_p2144.html

Do all the tempered glass protectors make the screen look odd, or are some better and more "HD" than others? I read the thread about the xgear one and it sounds like it distorts the screen.

kingston73 said:
Do all the tempered glass protectors make the screen look odd, or are some better and more "HD" than others? I read the thread about the xgear one and it sounds like it distorts the screen.
Click to expand...
Click to collapse
Yes it definitely disturbs. That's why the sticker type protector is somehow a better choice, but if you have a sturdy case protector to begin with you don't need a screen protector, that gorilla glass will serve it purposes.

greentaloy said:
iMuse glass protector could be a good solution:
http://www.slickfans.com/imuse-tempered-glass-screen-protector-for-galaxy-s3-04mm_p2144.html
Click to expand...
Click to collapse
I dont that will be a good choice because those tiny holes for the proximity sensor are sure to cause you problems
Sent from my GS3
---------- Post added at 10:45 AM ---------- Previous post was at 10:41 AM ----------
Yes the Spigen is discontinued but Seidio has its Vitreo which I feel is a little better that Spigens Glas... I have had both and like the Vitreo better just slightly and also comes in black and white
Here's the link http://www.seidioonline.com/samsung-galaxy-s-iii-vitreo-screen-guard-black-p/sptssgs3-bk.htm
Sent from my GS3

I ordered mine from Bestskinsever. Quality is like Zagg Invisible Shield for about 1/4 of the price.

I don't like the Zagg ones, its very clear when you're using them that you have a screen protector on. I have the DBA Just Like Glass mentioned above. I like it for the most part. The screen protector has gotten very scratched up but the screen is safe and sound. Worst bit about it is that the edges dont look properly adhered. They havent peeled up for me but they look like they arent stuck on as well as the rest of the protector

I just ordered my spigen ultra nano clear will report back
Sent from my SGH-T999 using xda premium

Just like glass, dbacases.com
Sent from my SGH-T999 using xda app-developers app

Do NOT buy*
SPIGEN SGP Samsung Galaxy S3 Premium Glass Screen Protector White
Glass looks and feels great.
HOWEVER
Must be used with a raised home button and case on the edges.
Sensitivity was severely compromised.
You wouldn't notice on regular use, but as soon as you got typing. I became very frustrated. Ruined texting all together.
Even swype was some garbage.
40$ well wasted.
Sent from my SCH-I535 using xda app-developers app

I've been using a Qmadix tempered tech armor and it does need a raised sticker and only comes with three. It works great though and I haven't lost any use. I bought mine in white from a sprint store and my only complaint is the dust that gets stuck on the glue like edges underneath. I can post pictures of the box and the glass screen protector if requested my camera just isn't connecting on the cm10.1 nightlie I have haha
Sent from my SAMSUNG-SGH-I747 using xda premium

svetloslav said:
Yes it definitely disturbs. That's why the sticker type protector is somehow a better choice, but if you have a sturdy case protector to begin with you don't need a screen protector, that gorilla glass will serve it purposes.
Click to expand...
Click to collapse
I don't trust Gorilla glass at all, seen so many phones scratched that have it and it does nothing for impacts.

Screen protectors

Another new phone, another hunt for the perfect screen protector. The factory one isn't bad, but it isn't tempered glass. I've ordered a couple of Nillkin H+ pros off eBay as they've been ok in the past, anyone got other recommendations for me?

hackdrag0n said:
Another new phone, another hunt for the perfect screen protector. The factory one isn't bad, but it isn't tempered glass. I've ordered a couple of Nillkin H+ pros off eBay as they've been ok in the past, anyone got other recommendations for me?
Click to expand...
Click to collapse
I think they are all pretty much the same. I'm on my second tempered glass already. Just make sure it has a camera cut out or you might get flare when taking selfies at certain conditions.
* Join Huawei P10/P10+ WhatsApp Group *

Disagree there. The first one I got was $2 and it was shocking. I was expecting a small gap at the sides because of the 2.5d screen but this one barely covered vertically as well. Annoying as I like to keep as much of the front covered as possible so that the tempered glass can protect the screen from drops.

Found the Ultimate Shield one to be excellent.
Try this one from Ultimate Shield. It covers the whole screen very close to the edge. The best one for the Huawei P10 Plus.
https://www.ultimateshield.co.uk/co...awei-p10-plus-tempered-glass-screen-protector

Knowledge is Treasure said:
Try this one from Ultimate Shield. It covers the whole screen very close to the edge. The best one for the Huawei P10 Plus.
https://www.ultimateshield.co.uk/co...awei-p10-plus-tempered-glass-screen-protector
Click to expand...
Click to collapse
A picture would be great to see the cutouts and side. Thanks
Sent from my VKY-L29 using Tapatalk

Ultimate Shield Tempered Glass Huawei P10 Plus
thermalboyz said:
A picture would be great to see the cutouts and side. Thanks
Sent from my VKY-L29 using Tapatalk
Click to expand...
Click to collapse
I have attached a picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Knowledge is Treasure said:
I have attached a picture.
Click to expand...
Click to collapse
Thanks and appreciated. The cutouts are not the one I am after.
Sent from my VKY-L29 using Tapatalk

I already dropped my phone and cracked out right above the speaker grille. Lucky Huawei have a three month screen promise offer so it's getting fixed for free. Maybe I need to go with one of those full cover border ones

You can try nillkin tempered glass ap+ pro

BROTECT AirGlass Premium Glass Screen Protector Clear
for Huawei P10 Plus would be might highest recomendation.
I used the same one on the Mate 9 and it's just the best. ultrathin glass that doesn't clip on the edges and

I've installed a Nillkin h+ and it seems to be doing the job well. Have tried the Brotect on Mate 9 as well. Certainly a nice fit but it doesn't seem thick enough to shield the screen from impact.

Has anyone tired or have feedback on this protector from Nilliken? Please and Thank you.
Nillkin 3D AP+ Pro edge shatterproof fullscreen tempered glass screen protector for Huawei P10 Plus P10+ VKY-L29

LaughinGoh said:
Has anyone tired or have feedback on this protector from Nilliken? Please and Thank you.
Nillkin 3D AP+ Pro edge shatterproof fullscreen tempered glass screen protector for Huawei P10 Plus P10+ VKY-L29
Click to expand...
Click to collapse
I was looking at this one too. Have you found a local or Canadian online retailer?

Daniac said:
I was looking at this one too. Have you found a local or Canadian online retailer?
Click to expand...
Click to collapse
Unfortunately I could only find them on nillkin online website and eBay. Nothing in Canada, per usual..

Nillkin tempered glass pro is very thin, cut out on sensors and speaker. (no cutout for front camera. Finger print sensor cutout is good, no bubbles and easy to install.
Good quality and instructions. Only issue I found was it covered not fully to the edge. It has about 3mm gaps (quite a big gap) from the screen edge. Will upload some pics tonight.
Sent from my VKY-L29 using Tapatalk

thermalboyz said:
Nillkin tempered glass pro is very thin, cut out on sensors and speaker. (no cutout for front camera. Finger print sensor cutout is good, no bubbles and easy to install.
Good quality and instructions. Only issue I found was it covered not fully to the edge. It has about 3mm gaps (quite a big gap) from the screen edge. Will upload some pics tonight.
Sent from my VKY-L29 using Tapatalk
Click to expand...
Click to collapse
Got the exact same experience. Tried other ones that had a better fit but their quality was ****

Also installed the Nillikin...features I was after were minimum cutouts and .2mm thin with radiused edges for smooth navigating over home button. Fantastic smooth oleophobic touch.
Does the job on my Canadian Rogers P10+ and I use two Spigen Rugged Armour cases with good front lips. I alternate between the the slim case and the EXTRA with larger air cushion corners depending on activities.

how to put the temperred glass
Hello all,
have you put the tempered glass over the pre-installed cover that comes with the P10?

No...remove the pre-installed plastic one first.

I went for THIS ONE after having issues with other ones suposedly for the P10 Plus
Fitted great and has stayed stuck on! It's the type with sticky only on the coloured part of the protector

Best case and curved glass screen protector combo

Looking for a good curved tempered glass protector (tried 2 different ones and they've both gotten dust under them in less than 48hrs and the corners have the annoying sticking/clicking issue) and a case that won't push on the glass as I suspect that's my biggest issue, my current case pushes against the glass protectors i've tried and doesn't allow them to fully adhere.
Currently have the spigen rugged armor on my phone, it was just the first one i've tried (and we all know it takes trying several before we find just the right one) so let me know what case/glass combo you've got that's working perfectly for you!

My Pixel 2 XL hasn't arrived yet but from my experience with my S7 edge I never found a good curved screen protector. Unfortunately the curves mean that adhesion to the screen is terrible, touch response problems and/or dust under the screen is unavoidable.

pvtjoker42 said:
Looking for a good curved tempered glass protector (tried 2 different ones and they've both gotten dust under them in less than 48hrs and the corners have the annoying sticking/clicking issue) and a case that won't push on the glass as I suspect that's my biggest issue, my current case pushes against the glass protectors i've tried and doesn't allow them to fully adhere.
Currently have the spigen rugged armor on my phone, it was just the first one i've tried (and we all know it takes trying several before we find just the right one) so let me know what case/glass combo you've got that's working perfectly for you!
Click to expand...
Click to collapse
I have Amfilm updated version and Spigen Neo Hybrid. They are perfectly matched, with no lint traps along any of the edges. Only part of the phone with no protector coverage is the small gap between the speakers and the case lip.
Sent from my Pixel 2 XL using Tapatalk

I got a weird no brand NXET 3D curve and it's not that bad, waiting for a VRS Design black case and an IntelliArmor that should be a worthy combo

I had to abandon my first screen protector because my Spigen Rugged Armor was pushing on the sides, causing it to click and lift up. I'm waiting on my IntelliGlass 3D protector to ship. Hopefully that ones a tiny bit narrower as I like my base, but would like to get a protector on as well.

randomhkkid said:
My Pixel 2 XL hasn't arrived yet but from my experience with my S7 edge I never found a good curved screen protector. Unfortunately the curves mean that adhesion to the screen is terrible, touch response problems and/or dust under the screen is unavoidable.
Click to expand...
Click to collapse
Whitestones are good on the Samsung. Though the price is high and the install is a little tougher. Hopefully we get a Whitestone for the 2 xl.

amFilm Tempered Glass paired with the Suensan TPU case is absolutely perfect, in my opinion. The coverage is as close to 100% as you are going to get. The amFilm protector (version 2) has excellent adhesive and doesn't get smudged up with fingerprints. The Suensan TPU case is a very firm fit with excellent responsive buttons. And I was pleased to see that using squeeze for assistant doesn't push the case into the protector.
I HIGHLY recommend this combo.
Suensan Case:
https://www.amazon.com/gp/product/B0753CH9T5/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
amFilm Proector: (Ignore the bad reviews. They are all from people who got version 1, like I initially did, which had issues. My v2 replacement has been absolutely perfect.)
https://www.amazon.com/gp/product/B075WW69PS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sn0warmy said:
amFilm Tempered Glass paired with the Suensan TPU case is absolutely perfect, in my opinion. The coverage is as close to 100% as you are going to get. The amFilm protector (version 2) has excellent adhesive and doesn't get smudged up with fingerprints. The Suensan TPU case is a very firm fit with excellent responsive buttons. And I was pleased to see that using squeeze for assistant doesn't push the case into the protector.
I HIGHLY recommend this combo.
Suensan Case:
https://www.amazon.com/gp/product/B0753CH9T5/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
amFilm Proector: (Ignore the bad reviews. They are all from people who got version 1, like I initially did, which had issues. My v2 replacement has been absolutely perfect.)
https://www.amazon.com/gp/product/B075WW69PS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Give it a bit. I have heard a lot of people talking about dust getting under those as time goes on.

CBMC said:
Give it a bit. I have heard a lot of people talking about dust getting under those as time goes on.
Click to expand...
Click to collapse
Eh, in time that's bound to happen with any curved protector that only adheres around the edges. Dust always makes its way in at some point. This has been the case on my last 2 phones (OnePlus 3 and Pixel XL), no matter what brand I used, including Spigen, Orzly, amFilm etc.
With that said, the Version 1 amFilm for the 2 XL had terrible adhesive and the protector barely stayed on the phone. Within 2 days I had dust underneath. The only reason why I bothered with another one was because it developed a crack on the top corner, out of nowhere, and they sent me a replacement for free. The Version 2 is a whole different story and is much improved. It has the stickiest adhesive I've used on any curved TG protector in the past 2 years and has the most difficult to see dot matrix I've seen on any prior protector.
Overall, it is a great option and I'd buy it again if I had to. I'm almost 2 weeks in with no dust underneath and while I know it's inevitable that some will make its way in, I don't anticipate it happening any time soon.

Spigen Rugged Armor paired with Moshi IonGlass

I'm running with the Diztronic and a temporary Zagg. All of these first-run TGSPs are horrible and rainbow like crazy but I don't think I can do any better at the moment.
This dot matrix craze has poisoned the entire market.

Krzychu23 said:
Spigen Rugged Armor paired with Moshi IonGlass
Click to expand...
Click to collapse
Where did you get the screen protector? Their website says they are coming soon

worldsoutro said:
Where did you get the screen protector? Their website says they are coming soon
Click to expand...
Click to collapse
I don't know what you mean. I just checked and it's available on their website.
I got it from local TELUS (canadian mobile provider) store. TGSP has adhesive just around borders but it's great and most important... no dot matrix.

I'd love to know more about the Moshi molded TGSP for the P2XL. I've got a Zagg / Invisible Shield on mine now -- installed courtesy of Verizon (while I choked on the price), along with a Speck Presidio case. The phone is protected, but the Invisible Shield is NOT the right fit for the nice curved screen - it's flat, can't extend to the curved edges, catches dust, etc. However it DOES protect the screen for the moment.
Anyway - the Moshi protectors are here:
https://www.moshi.com/moshicom-ionglass-screen-protector-pixel-2-xl
I'd just love to see some reviews before dropping another $35 on yet another accessory. Does the curved shape match the edges of the P2XL properly? How do the cutouts fit? What's it like having only the edges stuck down (is that how it works?) and do you see gaps in the middle?
It shouldn't be so hard / painful to get a properly fitting TGSP for a new flagship phone like this!

OnePlus 8 Screen Protector

MOD EDIT: Spam ads removed

My OP8 came with a screen protector attached and I've put on (for now) the case that was supplied. Does the camera itself need a protector? I've never had one before.
Alan

MOD EDIT: Spam ads removed

Anyone have ordered this
PaceBid Protector de Pantalla Compatible con Oneplus 8, Cobertura Completa, Dureza 9H, Anti-arañazos ，Sin Burbujas ，Caso amigable ， Alta Definición Cristal Templado para Oneplus 8 https://www.amazon.es/dp/B087M4HS6H/ref=cm_sw_r_other_apa_i_IT7TEb7YN9SYG
Is full glue?
Enviado desde mi IN2013 mediante Tapatalk

David.SR said:
I bought a few screen protectors for my OnePlus 8 and this is the only 1 that worked correctly with no bubbles. For the price paid I received two film screen protectors, one clear carbon fiber like back protector and two camera lens protectors. because it makes the phone look stunning. The camera lens do not feel like glass but rather plastic, but they have not impacted my photos so they are ok. The screen protector film is unbelievably easy to apply with the provided kit and works with the fingerprint scanner.I would highly recommend it!:good: The video that comes with this product is perfect. Took out all the guess work from other sellers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Hi David,
you recommended the screen protector above for about 5 weeks.
What do you think about this protector after this period of time?
Was the purchase worth it?
Thanks in advance for your answer
B. Rgrds
e.roc

e.roc said:
Hi David,
you recommended the screen protector above for about 5 weeks.
What do you think about this protector after this period of time?
Was the purchase worth it?
Thanks in advance for your answer
B. Rgrds
e.roc
Click to expand...
Click to collapse
I got this screen protector based off his review after trying another screen protector that was absolutely terrible.
I'm my opinion the installation process alone makes it well worth it. Makes it virtually impossible to misalign it. Add that it comes with a rear glass and camera protector and it was a no brainer for me.
As far as the screen protector itself, to me it feels like a thick, soft plastic. Almost like I can dig my nail into it and pick at it if I tried. But it feels just fine for normal touch inputs and doesn't interfere with the display quality.

sjs87 said:
I got this screen protector based off his review after trying another screen protector that was absolutely terrible.
I'm my opinion the installation process alone makes it well worth it. Makes it virtually impossible to misalign it. Add that it comes with a rear glass and camera protector and it was a no brainer for me.
As far as the screen protector itself, to me it feels like a thick, soft plastic. Almost like I can dig my nail into it and pick at it if I tried. But it feels just fine for normal touch inputs and doesn't interfere with the display quality.
Click to expand...
Click to collapse
Sounds promising, would you recommend this protector (for a long time use) ?
(The original protector is a kind of dust magnet)
Thanks in advance for your answer
Cheers!

e.roc said:
Sounds promising, would you recommend this protector (for a long time use) ?
(The original protector is a kind of dust magnet)
Thanks in advance for your answer
Cheers!
Click to expand...
Click to collapse
I've only been using it for about a week now and so far it feels like it will last a long time. The sides are flush with the curve and doesn't look like it will lift anytime soon. However I forgot to mention that 2 screen protectors come packaged so If this one ever starts to lift or get damaged in any way, I have a replacement.

I know it doesn't have the greatest reviews, but I had success with it and I think it's one of the best film protectors I've tried.
https://www.amazon.com/Ringke-Screen-Protector-Designed-OnePlus/dp/B08687RBTW/ref=sr_1_4?dchild=1&keywords=oneplus+8+ringke&qid=1591734180&sr=8-4

Any good tempered glass screen protectors or Whitestone-like kits yet?

David.SR said:
I bought a few screen protectors for my OnePlus 8 and this is the only 1 that worked correctly with no bubbles. For the price paid I received two film screen protectors, one clear carbon fiber like back protector and two camera lens protectors. because it makes the phone look stunning. The camera lens do not feel like glass but rather plastic, but they have not impacted my photos so they are ok. The screen protector film is unbelievably easy to apply with the provided kit and works with the fingerprint scanner.I would highly recommend it!:good: The video that comes with this product is perfect. Took out all the guess work from other sellers.
Click to expand...
Click to collapse
Hello, It seems good, but is the screen protector really efficient compared to a tempered glass? I'm hesitating between this one and an UV tempered glass like Foluu:
https://www.amazon.fr/protection-ex...ywords=foluu+oneplus+8&qid=1593505020&sr=8-17

If you are just wanting a screen protector and not necessarily a glass one check out the LK screen protector. Super easy to apply, case friendly and feels as good as glass as far as your finger is concerned. Best film screen protector I have used yet.
Sent from my IN2017 using Tapatalk

bkeaver said:
If you are just wanting a screen protector and not necessarily a glass one check out the LK screen protector. Super easy to apply, case friendly and feels as good as glass as far as your finger is concerned. Best film screen protector I have used yet.
Click to expand...
Click to collapse
Second this .I use the LK protectors on all my OnePlus phones

juggamonkey said:
Second this .I use the LK protectors on all my OnePlus phones
Click to expand...
Click to collapse
The issue is always the same with plastic protectors: they will not prevent the screen from shattering when the phone falls. With a glass protector, you have a much greater chance of not having a damaged screen.

spigen tough armor + screen protector
Hey guys,
I just ordered a oneplus 8 on prime day and I want to order a spigen tough armor case for it.
Can you recommend me a screen a protector that works well with the case, please ?
Thank you for your help !

cheptii said:
Hey guys,
I just ordered a oneplus 8 on prime day and I want to order a spigen tough armor case for it.
Can you recommend me a screen a protector that works well with the case, please ?
Thank you for your help !
Click to expand...
Click to collapse
I am also a Spigen Tough Armor user.
I would also like to know what will work best with this case.
I had one on it, but it didn't work well with the case and kept lifting at the edges where case meets up to protector.
Any ideas anyone?

Currently installed a nillkin screen protector, it's glass, full adhesive, responsive, good oleophobic coating and feels like the actual screen (fingerprint unlock works, maybe 10% slower)
It comes with an installation template to fit the screen protector perfectly aligned (kinda like a case)
It's also full screen and covers the front facing camera, sensors work perfect . The only thing is it covers maybe 0.1mm of the sides, very very minimal and hardly noticeable it's actually nicer haha
Will post some pics soon, it's a great protector!

I need something that won't lift when I put my case back on... Still struggling to find something

crazynapkinman said:
I need something that won't lift when I put my case back on... Still struggling to find something
Click to expand...
Click to collapse
Have you tried the nillkin screen protector? It works perfect with my Ringke Fusion X case

As promised photos of the nillkin with my ringke fusion X case