[Video] Tudia lite TPU case unboxing and hands-on - ONE Accessories

Hey everyone-
Hope you all have been enjoying the videos. Here is an unboxing and hands-on of the clear and purple Tudia lite TPU case for the OnePlus One. For additional OnePlus and technology videos, please check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
[Video] IMAK Crystal clear case for the OnePlus One.
[Video] Cruzerlite TPU case for the OnePlus One
[Video] OnePlus One extended review.

Thanks for the review! It was well-informative. I have the black one myself, and I have a few of questions to ask:
1. On the top and bottom of the case, where it's considered "tacky" or "sticky," how much dust/fingerprints do you get on those parts? I feel like they're magnets for that kind of stuff, and it's kinda hard to wipe clean.
2. How did you remove the case so easily?! I feel like I have trouble just removing one corner while at the same time concerned that I'll damage my phone.
3. Since you owned it for a while so far, what do you further think about the case and how it will sustain drops?

Related

/ [Video] Another HTC One Diztronic TPU Case Review

Here is my review of the HTC One Diztronic TPU Case. I was unaware that a video already existed for this case, but maybe having two will give you more insight. Here it is:
http://www.youtube.com/watch?v=czwrO4AWlQ0&feature=youtu.be
Thanks
Nice, I just don't like the eye cut out for the camera on this...

[Video] Cruzerlite Bugddroid Circuit TPU case for OnePlus One

Hello. An unboxing and hands on video of the Cruzerlite Bugdroid Citcuit TPU case for the OnePlus One. For additional OnePlus and technology videos, please check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
[Video] IMAK Crystal clear case for the OnePlus One.
Cruzerlite latest batch Oneplus One TPU cases Cut outs are open (no longer covered)
KSmithInNY said:
Hello. An unboxing and hands on video of the Cruzerlite Bugdroid Citcuit TPU case for the OnePlus One. For additional OnePlus and technology videos, please check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
[Video] IMAK Crystal clear case for the OnePlus One.
Click to expand...
Click to collapse
I've got the red cruzerlite bug Droid. Really like it, fits and is comfortable to hold, especially pretty when sunlight shines through and refracts and the edges.
What I'd like is one with a clear flip built in.
Sent from my A0001 using Tapatalk
fards said:
I've got the red cruzerlite bug Droid. Really like it, fits and is comfortable to hold, especially pretty when sunlight shines through and refracts and the edges.
What I'd like is one with a clear flip built in.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I have the green one and it looks funky cool! :good:
WA_Bob said:
I have the green one and it looks funky cool! :good:
Click to expand...
Click to collapse
Do you have some pics?
Enviado desde mi Oneplus

[Video] Boxwave Minimus case for the OnePlus One

Hey Everyone-
Hope you all have been enjoying the videos. Here's an unboxing and hands-on with the Boxwave minimus case for the OnePlus One.
For additional OnePlus and technology videos, check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
[Video] IMAK Crystal clear case for the OnePlus One.
[Video] Cruzerlite TPU case for the OnePlus One
[Video] OnePlus One extended review.
[Video] Tudia lite case for the OnePlus One.
Just wanted to let everyone know that I've added annotations to the video indicating that on 8/11/14 I went to sign up for the Amazon Reviewer program and get the free screen protector and Boxwave doesn't offer a screen protector for the OnePlus One. 
"On a scale from 1 to 10... I give this two-thumbs up." LOL.
Thanks for the review.
awesome music intro.... haha :silly: :good:

[Video] Diztronic TPU case unboxing and hands-on

Hey Everyone-
Hope you all have been enjoying the videos. Here's an unboxing and hands-on with the Diztronic TPU case for the OnePlus One.
For additional OnePlus and technology videos, check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on I [Video] OnePlus One quick thoughts I [Video] OnePlus One Clear Case unboxing and hands-on I [Video] OnePlus One FlipCover unboxing and hands-on I [Video] DayJoy Aluminium bumper for the OnePlus One I [Video] IMAK Crystal clear case for the OnePlus One. I [Video] Cruzerlite TPU case for the OnePlus One I [Video] OnePlus One extended review. I [Video] Tudia lite case for the OnePlus One. I [Video] Boxwave minimus case for the OnePlus One
Great review!!!!! Personally I prefer the harder polycarbonate cases as they make my phone feel more sturdy (less impact protection though I'm sure) and the Nillkin case is really great
Nomelas said:
Great review!!!!! Personally I prefer the harder polycarbonate cases as they make my phone feel more sturdy (less impact protection though I'm sure) and the Nillkin case is really great
Click to expand...
Click to collapse
Thanks! I've got the nillkin PC case as well (review soon) and I couldn't agree more. It really is a fantastic PC case for a fantastic price. On a scale of 1-10 I give it .... You'll have to watch the video when I post it :laugh:

[Video] TPU case shootout for the OnePlus one

Hey Everyone-
Hope you all have been enjoying the videos. I mentioned in a video i was considering doing a TPU case shootout and you guys let me know that would be appreciated so ... here you go!
For additional OnePlus and technology videos, check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on I [Video] OnePlus One quick thoughts I [Video] OnePlus One Clear Case unboxing and hands-on I [Video] OnePlus One FlipCover unboxing and hands-on I [Video] DayJoy Aluminium bumper for the OnePlus One I [Video] IMAK Crystal clear case for the OnePlus One. I [Video] Cruzerlite TPU case for the OnePlus One I [Video] OnePlus One extended review. I [Video] Tudia lite case for the OnePlus One. I [Video] Boxwave minimus case for the OnePlus OneI [Video] Diztronic TPU case for the OnePlus OneI [Video] Boxwave Blackout TPU case for the OnePlus One
Good job.......totally agree with the Tudia and Diz reviews......
Great review, I've seen reviews saying that the Boxwave Blackout cracks and chips after little use or removing it from the phone a couple of times, can anyone confirm this? That's the one I like the most. Thanks.
Sent from my A0001 using Tapatalk
I have the nillkin case, not in your review but it has cut outs for the power and volume. Great fit even with tempered glass it still has a small gap. I couldn't say its a dime distance since I'm in the uk but even with the glass there is still a 1 mm gap. Cheap and seems OK so far.
Also have a diztronic on the way and an official OnePlus tpu. Who knows may do another mini review once they all arrive.
disk0360 said:
I have the nillkin case, not in your review but it has cut outs for the power and volume. Great fit even with tempered glass it still has a small gap. I couldn't say its a dime distance since I'm in the uk but even with the glass there is still a 1 mm gap. Cheap and seems OK so far.
Also have a diztronic on the way and an official OnePlus tpu. Who knows may do another mini review once they all arrive.
Click to expand...
Click to collapse
None of the cases included in this video are PC, they are all TPU. The nillkin case is PC. All PC cases have cutout buttons because PC doesn't flex its made for abrasion protection. I have reviewed a couple of PC cases on my channel if you want to check them out, the BoxWave minimus, the official 1+ cover, and the nillkin PC case video will be live soon.
A PC case will be much much more friendly towards screen protectors. TPU cases will be more likely to push against the sides of the glass and cause bubbles.
The Nillkin PC case is surprisingly high quality. Like, really high quality ::cough:: better than the official case ::cough::
I'm lookin forward to your review. No matter how many accessories I own I always always read and watch other reviews too. I think we have a sickness
What was your favorite case amongst all the ones you tried, regardless of material?
KuduIO said:
What was your favorite case amongst all the ones you tried, regardless of material?
Click to expand...
Click to collapse
hmmmmm ..... man that's tough. I'll answer it without answering it. Here's my personal thought process behind this question.
1) I don't drop my phone very often. One broken phone in 10+ years and I'm comfortable replacing parts on my own phone if need be, so impact resistance isn't too important to me. This means TPU cases and combination PC/silicone/TPU type cases ( think otterbox) are more than what i need.
Plus if i did blow up a phone beyond repair, I've got more phones.
2) I prefer a slim design case. Since all i need is abrasion protection, I don't want to add too much fat to my phone.
3) I like texture. I don't want to add a case which is slippery because that defeats point #1 cause i might drop my phone
So right now I'm really liking the Nillkin snap on PC case. It's what's currently on my phone. Ask me again in a week and it might be a different case but my logic above remains the same.
Hope that helps.
KSmithInNY said:
hmmmmm ..... man that's tough. I'll answer it without answering it. Here's my personal thought process behind this question.
1) I don't drop my phone very often. One broken phone in 10+ years and I'm comfortable replacing parts on my own phone if need be, so impact resistance isn't too important to me. This means TPU cases and combination PC/silicone/TPU type cases ( think otterbox) are more than what i need.
Plus if i did blow up a phone beyond repair, I've got more phones.
2) I prefer a slim design case. Since all i need is abrasion protection, I don't want to add too much fat to my phone.
3) I like texture. I don't want to add a case which is slippery because that defeats point #1 cause i might drop my phone
So right now I'm really liking the Nillkin snap on PC case. It's what's currently on my phone. Ask me again in a week and it might be a different case but my logic above remains the same.
Hope that helps.
Click to expand...
Click to collapse
Very useful information, thanks. Just wondering, have you also tried the Pelosi case? It's what I'm thinking of getting and it seems like it would really satisfy your requirements.
Has anyone tried the Orzly TPU? Is there a lip on the TPU case? if so, how thick is the lip?
KSmithInNY said:
None of the cases included in this video are PC, they are all TPU. The nillkin case is PC. All PC cases have cutout buttons because PC doesn't flex its made for abrasion protection. I have reviewed a couple of PC cases on my channel if you want to check them out, the BoxWave minimus, the official 1+ cover, and the nillkin PC case video will be live soon.
A PC case will be much much more friendly towards screen protectors. TPU cases will be more likely to push against the sides of the glass and cause bubbles.
The Nillkin PC case is surprisingly high quality. Like, really high quality ::cough:: better than the official case ::cough::
I'm lookin forward to your review. No matter how many accessories I own I always always read and watch other reviews too. I think we have a sickness
Click to expand...
Click to collapse
Actually the unique design of the OPO doesn't push the case against the screen so you're safe, I do have a TPU case(as I has to my previous Desire HD phone ..no issues)
P.S. I do have tempered glass in the OPO which is way better but still in my DHD I has matte film which was nice(there still didn't have any issues with bubbles and do mind I'm a perfectionist..)
Thanks for the vid, very useful!

Categories

Resources