Develop Bugs

Plz help me i brick Huawei Ascend P6

Please help. I brick Huawei Ascend P6 after installing B116. The phone does not start at all. One can do something or just service? Thanks

rednic said:
Please help. I brick Huawei Ascend P6 after installing B116. The phone does not start at all. One can do something or just service? Thanks
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app. by some card reader. Now insert sd card and press vol+ vol- and power button. Install firmware and also go to recovery mode and wipe cache. You can access recovery by pressing vol - and vol + button simultaneously.
Hope this works !!

hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app. by some card reader. Now insert sd card and press vol+ vol- and power button. Install firmware and also go to recovery mode and wipe cache. You can access recovery by pressing vol - and vol + button simultaneously.
Hope this works !!
Click to expand...
Click to collapse
My phone does not start at all. I press vol + vol- and power button.
http://forum.xda-developers.com/showthread.php?t=2447198
I install Stock Firmware B116 -> dload_B116.zip md5 : 01bc5ae3c0095efeb6ded805f73c2b45 !

rednic said:
My phone does not start at all. I press vol + vol- and power button.
Click to expand...
Click to collapse
Might be a stupid question but are you sure your phone has battery left?
Sent from my P6-U06 using Tapatalk 4

Ottomaani0 said:
Might be a stupid question but are you sure your phone has battery left?
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
when I install b116 the battery was 90%

rednic said:
when I install b116 the battery was 90%
Click to expand...
Click to collapse
Ok. No signs of life if you plug in the charger?
Sent from my P6-U06 using Tapatalk 4

Ottomaani0 said:
Ok. No signs of life if you plug in the charger?
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
Phone is dead. When installed B116 OK on yellow background. Restart and phone is dead.

rednic said:
Phone is dead. When installed B116 OK on yellow background. Restart and phone is dead.
Click to expand...
Click to collapse
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4

Ottomaani0 said:
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
send service:crying:

rednic said:
send service:crying:
Click to expand...
Click to collapse
Yep, it's sad I just got mine back from service after 4 weeks
Sent from my P6-U06 using Tapatalk 4

Ottomaani0 said:
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
is there any sign of connectivity with pc on inserting data cable?

I got the same issue trying to update to B117. Frozen dead. I'll bring it to the service today and get back when I have news on this.

Did you guys root or add custom roms ? Probably that interfering with update.

I've just rooted the phone and installed clockwork recovery. No custom ROM.
On the other hand it is strange that today the led started blinking red (battery under 10%). I've connected it to the charger and after sometime stopped blinking. So I draw the conclusion that the phone is in some idle frozen mode.
The issue is that the only thing I could do is to wait until the battery goes full dry and shuts down for real. Then charge it again and try to enter the factory mode.
I'll go on the warranty claim and see what the guys tell me.
If the battery would have been removable this would have been simple. I've never had this issue with no other older Android smartphone... and I've rooted and modded quite a few.

He returned the phone by service. Motherboard was broken.
My firmware now is P6-U06,Android_4.2,Emtion_UI,V100R001C678B103, kernel 3.0.8-00783-g2335f22.
is the last?

rednic said:
He returned the phone by service. Motherboard was broken.
My firmware now is P6-U06,Android_4.2,Emtion_UI,V100R001C678B103, kernel 3.0.8-00783-g2335f22.
is the last?
Click to expand...
Click to collapse
you bricked it ..dont lie

mendetr augustinian
GalaxySIIII said:
you bricked it ..dont lie
Click to expand...
Click to collapse
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??

Absolut22 said:
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??
Click to expand...
Click to collapse
I sent in service
They changed the motherboard
Now I put B114
Pass the original 111B
It is still officially the version
http://consumer.huawei.com/en/support/products/downloads/p6-u06-en.htm

Absolut22 said:
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??
Click to expand...
Click to collapse
try it u might be lucky

In my case, the phone is still in service (1 week and counting). I assume it's going to have some hardware replaced. If it was just a software issue, this would have been solved way quicker. I am curious though whether is the same motherboard issue.

[Q] hard brick vibrates 7 times :(

last night i was just playing with my desire hd and i did partition sd card card from ext touch recovery and then suddenly ext recovery stuck at partitioning sd card i pulled the battry out and reinserted it it again now when i try to turn it on it gives 7 vibrates with black screen cannot go to bootloader vol down+pwr nothing happens vol up+pwr nothing happens vol down+vol up +pwr vibrates 5 time with a stable green led and ofcourse black screen plz help me thanks in advance

When you plug it into your computer, does it respond to ADB or fastboot?

bananagranola said:
When you plug it into your computer, does it respond to ADB or fastboot?
Click to expand...
Click to collapse
no no fastboot no adb it goes only in qualcomm diagnostic mode called download mode thanks for the quick reply

bananagranola said:
When you plug it into your computer, does it respond to ADB or fastboot?
Click to expand...
Click to collapse
first of all in need MPRG8255.hex and 8255_msimage.mbn so i can flash it through qpst i was just gogling it how can i creat .hex file or download i did not find any file what i find just a way to creat MPRG7x30.hex and 7x30_msimage.mbn? over here http://www.anyclub.org/2012/04/how-to-build-emmc-flash-programmer.html as i am a noob i didnt understand a word of it can u plz made me mprg8255.hex thanks in advance

Branded badmash said:
first of all in need MPRG8255.hex and 8255_msimage.mbn so i can flash it through qpst i was just gogling it how can i creat .hex file or download i did not find any file what i find just a way to creat MPRG7x30.hex and 7x30_msimage.mbn? over here http://www.anyclub.org/2012/04/how-to-build-emmc-flash-programmer.html as i am a noob i didnt understand a word of it can u plz made me mprg8255.hex thanks in advance
Click to expand...
Click to collapse
I have no idea what you're saying here.

bananagranola said:
I have no idea what you're saying here.
Click to expand...
Click to collapse
solved any way thanks for help

Hello,
I had the same problem with my old HTC Desire (7 vibrations) and it hangs at boot image.
It was a hardware failure.

Branded badmash said:
solved any way thanks for help
Click to expand...
Click to collapse
Did you get it to work?

Branded badmash said:
solved any way thanks for help
Click to expand...
Click to collapse
how dd you do it?

d-Did i brick my phone ? it flashes red&blue& black display [d858hk marshmallow 30a]

d-Did i brick my phone ? it flashes red&blue& black display [d858hk marshmallow 30a]
i was trying to root but it fails every time when i reboot
so i tried to install twrp recovery
i had the same exact file and tried to flash it with flashify
i did it twice
the third time i installed auto rec for my d858hk but it says lollipop
after that he said D858HK ONLY ! so i didn't care about my marshmallow
flashed with flashify and rebooted to recovery by it
phone's led notification flashing red and blue since that moment
i disconnected the battery and placed it again and powered on still flash red and blue and display still black
can't get in download mode
What to do ?

lazzarusbr said:
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
Click to expand...
Click to collapse
:good:

haget83 said:
:good:
Click to expand...
Click to collapse
no it didn't
i removed battery and pressed vol up
plugged it to pc
showed me there is no battery
inserted it
led flashes blue fastly and close after 3 sec it flashes again

can anybody unbrick my phone via team viewer ?

i opened device manager at my win 10 pc
it shows QHSUSB_BULK
What to do then ?

aly ayman said:
i opened device manager at my win 10 pc
it shows QHSUSB_BULK
What to do then ?
Click to expand...
Click to collapse
search for srk tool
Whz did you even run something for lollipop on a marshmallow phone?

bender_007 said:
search for srk tool
Whz did you even run something for lollipop on a marshmallow phone?
Click to expand...
Click to collapse
i never cared lol :3

aly ayman said:
i never cared lol :3
Click to expand...
Click to collapse
then everything is fine

bender_007 said:
then everything is fine
Click to expand...
Click to collapse
no it isn't man :/
no boot/download/recovery
just diffrent notification led speed

aly ayman said:
no it isn't man :/
no boot/download/recovery
just diffrent notification led speed
Click to expand...
Click to collapse
Ok, but didn't you see my previous post about srk tool?

http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?

forgot about it i was busy
720 mb
45 min i think

aly ayman said:
forgot about it i was busy
720 mb
45 min i think
Click to expand...
Click to collapse
The other way is: install linux inside vmware, get d858hk partitions, flash them via dd
But srk is great(question did it show a lot of drives which need to be formatted) --if yes then it will fix it

bender_007 said:
The other way is: install linux inside vmware, get d858hk partitions, flash them via dd
But srk is great(question did it show a lot of drives which need to be formatted) --if yes then it will fix it
Click to expand...
Click to collapse
i tried to dig inside web and didn't find a **** for this model

i downloaded octopus box but i got that card issue

sleepy af
see u 4 am gmt i think

aly ayman said:
no it isn't man :/
no boot/download/recovery
just diffrent notification led speed
Click to expand...
Click to collapse
Bro relax.your phone is just a 10 minute game.just follow the exact it is.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

This happened to me, and I just restored an EFS backup I had from recovery. That solved it for me.

AlwaysLucky said:
This happened to me, and I just restored an EFS backup I had from recovery. That solved it for me.
Click to expand...
Click to collapse
i've no recovery/download mode/boot

counts as hint ?
Qualcomm hs 9008

Note 7 SM-N930A download the kill update.

i found out my phone download the kill update. now when i try to turn it on, the update start. is there any way to cancel the update?
please help.:crying:

https://alliancex.org/viewtopic.php?f=111&t=6
Sent from my N7 using Tapatalk

How to
Ghost-3x said:
i found out my phone download the kill update. now when i try to turn it on, the update start. is there any way to cancel the update?
please help.:crying:
Click to expand...
Click to collapse
Just do a factory reset without turn on your mobile with button combination

too late
zaibjan said:
Just do a factory reset without turn on your mobile with button combination
Click to expand...
Click to collapse
too late . my phone is dead.

Oh no
Ghost-3x said:
too late . my phone is dead.
Click to expand...
Click to collapse
Oh no that's not right sorry for your loss.

Failed enter flashmode after flash with flashtool

I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?

De Flow said:
I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?
Click to expand...
Click to collapse
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution

Jemec26 said:
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution
Click to expand...
Click to collapse
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash

De Flow said:
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash
Click to expand...
Click to collapse
I am sorry, did not get you. Could you upload a screenshot?

Jemec26 said:
I am sorry, did not get you. Could you upload a screenshot?
Click to expand...
Click to collapse
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip

De Flow said:
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip
Click to expand...
Click to collapse
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.

i want to know how to install recovery mode in the current state.
if possible this will be easier to solve.

Jemec26 said:
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.
Click to expand...
Click to collapse
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it

De Flow said:
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it
Click to expand...
Click to collapse
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?

Jemec26 said:
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?
Click to expand...
Click to collapse
when in charger led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)

De Flow said:
when in charge led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)
Click to expand...
Click to collapse
Did you try the emergency mode on pc companion?

Jemec26 said:
Did you try the emergency mode on pc companion?
Click to expand...
Click to collapse
to connect with pc companion its condition must be in flashboot and my HH can not it

De Flow said:
to connect with pc companion its condition must be in flashboot and my HH can not it
Click to expand...
Click to collapse
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?

Jemec26 said:
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?
Click to expand...
Click to collapse
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion

De Flow said:
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion
Click to expand...
Click to collapse
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.

Jemec26 said:
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.
Click to expand...
Click to collapse
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.

ardos911 said:
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.
Click to expand...
Click to collapse
I have unlock bootloader and I've managed to replace recovery and install SuperSU

De Flow said:
I have unlock bootloader and I've managed to replace recovery and install SuperSU
Click to expand...
Click to collapse
May be this firmware is not for your phone.

ardos911 said:
May be this firmware is not for your phone.
Click to expand...
Click to collapse
maybe also can .... but i have existing firmware from xperifirm
now how to flash it????

Any news?
Hello, I have the same problem. Flash went wrong, now the flashmode is not possible.
Any chance to save ma cellphone?
Greetings