Develop Bugs

firmware upgrade locked

Hi
I have a LG G3 D855 european 16Gb
Today i received a upgrade firmware notification.
I run the upgrade and now my phone wont boot.
Black screen a notification light red and blue
Already take off the battery (after 15 minutes) and still the same
What can i do ?
I need so badly the phone
Thanks

sakana said:
Hi
I have a LG G3 D855 european 16Gb
Today i received a upgrade firmware notification.
I run the upgrade and now my phone wont boot.
Black screen a notification light red and blue
Already take off the battery (after 15 minutes) and still the same
What can i do ?
I need so badly the phone
Thanks
Click to expand...
Click to collapse
Is it rooted?
Sent from from my LG-D855

EpicChineseTime said:
Is it rooted?
Sent from from my LG-D855
Click to expand...
Click to collapse
yes
but i run other upgrades after and no problem

sakana said:
yes
but i run other upgrades after and no problem
Click to expand...
Click to collapse
reboot it and update it with pc suite, and then root the phone again...
A "Thanks" is highly appreciated. [emoji41]
Sent from from my LG-D855

EpicChineseTime said:
reboot it and update it with pc suite, and then root the phone again...
A "Thanks" is highly appreciated. [emoji41]
Sent from from my LG-D855
Click to expand...
Click to collapse
thanks in advance
but the device wont reboot
black screen and red blue led notification
nothing more happends

sakana said:
thanks in advance
but the device wont reboot
black screen and red blue led notification
nothing more happends
Click to expand...
Click to collapse
Hold the power button for a while, it should reboot.
I meant click the "thanks" button below! [emoji23]
Sent from from my LG-D855

EpicChineseTime said:
Hold the power button for a while, it should reboot.
I meant click the "thanks" button below! [emoji23]
Sent from from my LG-D855
Click to expand...
Click to collapse
No, no reboot
Press the power button for 3 minutes
nothing

sakana said:
No, no reboot
Press the power button for 3 minutes
nothing
Click to expand...
Click to collapse
Hmm, what about pulling the battery off?
EDIT: i missed it.
What about a hard reset?

EpicChineseTime said:
Hmm, what about pulling the battery off?
EDIT: i missed it.
What about a hard reset?
Click to expand...
Click to collapse
already tried
this is so stupid

sakana said:
already tried
this is so stupid
Click to expand...
Click to collapse
Try this.
http://solverbase.com/w/LG_G3:_Hard_Reset_(Factory_Reset)
Or try with pc suite.

EpicChineseTime said:
Try this.
http://solverbase.com/w/LG_G3:_Hard_Reset_(Factory_Reset)
Or try with pc suite.
Click to expand...
Click to collapse
tryed that. No option results
PC Suite won't recognize the device

sakana said:
tryed that. No option results
PC Suite won't recognize the device
Click to expand...
Click to collapse
Hmmm... what about returning it to the store?
Sent from from my LG-D855

have you tried to enter to download mode??
With the phone powered off, hold volume UP and keep holding while you connect usb . Then it will boot to download mode
now open PC suite and press on Phone menu, select Recover from upgrade errors.
It should download and restore your phone.
If it doesn't work then you need to manually download your firmware from this site (you need to put your imei after "esn=" before Going into the webpage), it is an official LG site for info about your personal phone there you will find an url with the KDZ file specific for your phone .
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOURIMEI
and follow the steps on this post to flash your stock rom

badtzo said:
have you tried to enter to download mode??
With the phone powered off, hold volume UP and keep holding while you connect usb . Then it will boot to download mode
now open PC suite and press on Phone menu, select Recover from upgrade errors.
It should download and restore your phone.
If it doesn't work then you need to manually download your firmware from this site (you need to put your imei after "esn=" before Going into the webpage), it is an official LG site for info about your personal phone there you will find an url with the KDZ file specific for your phone .
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOURIMEI
and follow the steps on this post to flash your stock rom
Click to expand...
Click to collapse
Thank you so much
It Works and did not loose any data
you save my day
Thank you Thank you Thank you Thank you Thank you Thank you Thank you

sakana said:
already tried
this is so stupid
Click to expand...
Click to collapse
try mine tutorial >>>LINK<<< it will not delete your apps and data

Xiaomi redmi 1s while flashing stops at like 14%

Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.

riteshgpt60 said:
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
Click to expand...
Click to collapse
Try Here
Read whole first, then give a try.

presetz said:
Try Here
Read whole first, then give a try.
Click to expand...
Click to collapse
Any one please share me tested solution with easy tutuorial.

riteshgpt60 said:
Any one please share me tested solution with easy tutuorial.
Click to expand...
Click to collapse
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.

presetz said:
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
Click to expand...
Click to collapse
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.

riteshgpt60 said:
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
Click to expand...
Click to collapse
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.

presetz said:
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
Click to expand...
Click to collapse
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.

riteshgpt60 said:
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
Click to expand...
Click to collapse
You said the led blinking a litte red light? Try to charged first till its more than 30% batt, and connect again. See if it show in pc

Thanks done after flashing v45

riteshgpt60 said:
Thanks done after flashing v45
Click to expand...
Click to collapse
Im glad to hear that, what an awesome experienced you got isnt it? At least you can learnt something from it

Bootloop, download mode and TWRP not working

I flashed Fulmic rom for my G3 D855 today. Everything was well when I discovered until I discovered, that camera app is not showing. The fix was to download the fix from Fulmics app and flash it via TWRP. I downloaded the fix and rebooted to install the fix. After reboot I got stuck in bootloop, when I try to access recovery, it goes to TWRP first logo and stays there. Nothing happens. When I try to access download mode, it shows the first download mode logo and stays there. Computer detects the phone in device manager as "LGE Android MTP Device". LGUP shows model as "Unknown". Cant do nothing more. Every help is appreciated.

Are you sure you flashed the fix ? Because it seems like you flashed something else that messed up your device

BrosseLi said:
Are you sure you flashed the fix ? Because it seems like you flashed something else that messed up your device
Click to expand...
Click to collapse
I downloaded the fix, then tried to install it via twrp. But twrp didn't start. So I ran AutoRec again to reinstall TWRP which seemed to go well. Forgot to mention this on first post. After reinstalling TWRP the problems occurred.

RobinNewToGalaxy said:
I downloaded the fix, then tried to install it via twrp. But twrp didn't start. So I ran AutoRec again to reinstall TWRP which seemed to go well. Forgot to mention this on first post. After reinstalling TWRP the problems occurred.
Click to expand...
Click to collapse
Autorec goes on STOCK untouched roms.

bender_007 said:
Autorec goes on STOCK untouched roms.
Click to expand...
Click to collapse
Yes, I know that now
But any idea how to fix it now?

RobinNewToGalaxy said:
Yes, I know that now
But any idea how to fix it now?
Click to expand...
Click to collapse
Let´s see:
-can´t enter twrp ?
-can´t enter download mode ? (volume up and connect to pc)

bender_007 said:
Let´s see:
-can´t enter twrp ?
-can´t enter download mode ? (volume up and connect to pc)
Click to expand...
Click to collapse
Can't enter twrp, just shows TEAMWIN logo with blue background and stripes. Nothing more happens.
Download mode text shows up, pc makes connection sound but I dont know what to do after that. I tried using LGUP but that showed that model is "Unknown".

Ah, try lg flash tool 2014 or lg flashtool (and a tot file), find a thread by hyelton (lg g3 get back to stock), this will help you

RobinNewToGalaxy said:
Can't enter twrp, just shows TEAMWIN logo with blue background and stripes. Nothing more happens.
Download mode text shows up, pc makes connection sound but I dont know what to do after that. I tried using LGUP but that showed that model is "Unknown".
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=1WgXuxDbmbc this video should help you if you can enter download mode

bender_007 said:
Ah, try lg flash tool 2014 or lg flashtool (and a tot file), find a thread by hyelton (lg g3 get back to stock), this will help you
Click to expand...
Click to collapse
I have tried this method also. Every time at 4% it says, error, remove battery and then reconnect and turn on phone. After that, connection with pc is lost.
Also, when I try to get to Download Mode, it should go then to Firmware update screen to? Am I right about that? If so, then it doesn't go to Firmware update screen.
But I tried it with a kdz I had in my computer and had used before. Downloading .tot file atm.

RobinNewToGalaxy said:
I have tried this method also. Every time at 4% it says, error, remove battery and then reconnect and turn on phone. After that, connection with pc is lost.
Also, when I try to get to Download Mode, it should go then to Firmware update screen to? Am I right about that? If so, then it doesn't go to Firmware update screen.
But I tried it with a kdz I had in my computer and had used before. Downloading .tot file atm.
Click to expand...
Click to collapse
did you change the port to com41?
oh, youre downloading the .tot file now, yeah just use the lg flash tool like the dude in the video says it should work if you can enter download mode and it detects the phone, just follow the steps i did it like 2 days ago

STM75 said:
did you change the port to com41?
oh, youre downloading the .tot file now, yeah just use the lg flash tool like the dude in the video says it should work if you can enter download mode and it detects the phone, just follow the steps i did it like 2 days ago
Click to expand...
Click to collapse
it seems to have stopped in LG Flash Tool, where it is saying "Waiting for connection". It has been so for 15 minutes now :crying:

RobinNewToGalaxy said:
it seems to have stopped in LG Flash Tool, where it is saying "Waiting for connection". It has been so for 15 minutes now :crying:
Click to expand...
Click to collapse
did you watch the whole video? try to remove the cable and then put it in a few sec

STM75 said:
did you watch the whole video? try to remove the cable and then put it in a few sec
Click to expand...
Click to collapse
i didn't find a video but a text and pics tutorial which also stated to remove the cable which i did. The "Waiting fo r Connection" text appears after I remove the cable.

RobinNewToGalaxy said:
i didn't find a video but a text and pics tutorial which also stated to remove the cable which i did. The "Waiting fo r Connection" text appears after I remove the cable.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=1WgXuxDbmbc i sent it before too

STM75 said:
https://www.youtube.com/watch?v=1WgXuxDbmbc i sent it before too
Click to expand...
Click to collapse
Did everything same like in the video but it still stays in "Waiting.." status.

RobinNewToGalaxy said:
Did everything same like in the video but it still stays in "Waiting.." status.
Click to expand...
Click to collapse
are you using a original lg cable? maybe try a diffrent usb port? if youre using a 3.0 port it might not work.

STM75 said:
are you using a original lg cable? maybe try a diffrent usb port? if youre using a 3.0 port it might not work.
Click to expand...
Click to collapse
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.

RobinNewToGalaxy said:
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.
Click to expand...
Click to collapse
you changed the port to com41?

RobinNewToGalaxy said:
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.
Click to expand...
Click to collapse
Also it stays in download mode screen, not Firmware update screen. I don't know if this affects anything.

Failed enter flashmode after flash with flashtool

I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?

De Flow said:
I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?
Click to expand...
Click to collapse
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution

Jemec26 said:
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution
Click to expand...
Click to collapse
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash

De Flow said:
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash
Click to expand...
Click to collapse
I am sorry, did not get you. Could you upload a screenshot?

Jemec26 said:
I am sorry, did not get you. Could you upload a screenshot?
Click to expand...
Click to collapse
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip

De Flow said:
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip
Click to expand...
Click to collapse
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.

i want to know how to install recovery mode in the current state.
if possible this will be easier to solve.

Jemec26 said:
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.
Click to expand...
Click to collapse
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it

De Flow said:
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it
Click to expand...
Click to collapse
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?

Jemec26 said:
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?
Click to expand...
Click to collapse
when in charger led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)

De Flow said:
when in charge led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)
Click to expand...
Click to collapse
Did you try the emergency mode on pc companion?

Jemec26 said:
Did you try the emergency mode on pc companion?
Click to expand...
Click to collapse
to connect with pc companion its condition must be in flashboot and my HH can not it

De Flow said:
to connect with pc companion its condition must be in flashboot and my HH can not it
Click to expand...
Click to collapse
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?

Jemec26 said:
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?
Click to expand...
Click to collapse
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion

De Flow said:
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion
Click to expand...
Click to collapse
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.

Jemec26 said:
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.
Click to expand...
Click to collapse
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.

ardos911 said:
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.
Click to expand...
Click to collapse
I have unlock bootloader and I've managed to replace recovery and install SuperSU

De Flow said:
I have unlock bootloader and I've managed to replace recovery and install SuperSU
Click to expand...
Click to collapse
May be this firmware is not for your phone.

ardos911 said:
May be this firmware is not for your phone.
Click to expand...
Click to collapse
maybe also can .... but i have existing firmware from xperifirm
now how to flash it????

Any news?
Hello, I have the same problem. Flash went wrong, now the flashmode is not possible.
Any chance to save ma cellphone?
Greetings

HEEEEEEEELLLPP!!! i think i bricked my G7! QUICK!!

im super worried right now, this is my only phone and really need it these days, thing is i tried to flash a kdz to my phone with lg up 1.14 and worked, everything was fine, but it had a may 2019 security patch and didnt want to update via OTA, so i downloaded a more recent kdz and did the same, but now with LG UP 1.15, thing is, this time, when it was supposed to reboot and show a circle that says "erasing" it stayed off.
now it doesnt react to anything, not even the volume down+power or the volume up and conecting to acces download mode it stays at a blank screen with no reaction, not even a vibration.
however, when changing ports, it stared installing a divice, however it said this:
qusb_bulk_cid:0402 _sn:c9aaeafb is set up and ready to go
i sherched and this appears to be a qualcomm brick, please tell me i can recover my phone.
someone help me quick please

ok, i installed qualcomm drivers and now my phone is detected as hs usb qdloader 9008 (COM9), which indeed is a qualcomm brick.
does anyone knows what to do next?

I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon

Ricky Almonte said:
I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon
Click to expand...
Click to collapse
yeah, i read that, got the files, even the firehose and did it. but now i have a new problem, im still brick but now my phone cant be recognice, every time it is conected the only thing it happens is the led blinking red, which i read it is the worst possible outcome. (im sure i did the qfile process correctly, i did it very carfully and only after reading like 6 posts so that i could be well informed.... it got quite techy)
why!! :crying::crying:
i read that mostly happens to the t mobile version of the phone, but mine is the cannadian one, i dont get it.
can someone now help me with this red blinking led?? i read a lot but the only thing i found is that ill need to open my phone and use the test points to access qualcomm mode, but it doesnt say more, i dont know where to begin:crying:

did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.

manuhuelva said:
did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.
Click to expand...
Click to collapse
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again

ThePanhead said:
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again
Click to expand...
Click to collapse
I hope u could resolve it. try other lgup versions. If u cant go download mode, hold vol- and power with plugged usb to pc and when the phone restarts u have to release too fast the buttons and hold vol+ until u get into download mode.

Hi, so my phone boots to lg g7 thinq splash screen and gets stuck there. I have a PM flashed to 11g. I can access download mode, edl, fastboot, and I can access all partitions in qfil. Can anyone send a copy of their mpt partition? I think I overwrote it on accident. Thanks.

Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841

Reyklein said:
Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
Click to expand...
Click to collapse
I'm currently trying that out now. Can you backup your mpt partition in qfil so I can download it? Thank you.

I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.

damprobot said:
I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.
Click to expand...
Click to collapse
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6

Baijoosharma said:
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6
Click to expand...
Click to collapse
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.

damprobot said:
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.
Click to expand...
Click to collapse
This is the only option i did it in 4 days repeat and repeat thats it r u usung same ezdextrat file attached in thread ir your own extracted files ? Doenload from here and repeat 0123456 untill monile turn on you will loss imei

I know I'm doing it correctly, as you can see in my screenshot above. The extracted files are not what I need. I need mpt partition, which isn't part of the kdz.
In other words, I messed up a partition the kdz won't fix.

I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol

Congrats your imei is still there ?

Baijoosharma said:
Congrats your imei is still there ?
Click to expand...
Click to collapse
Yes, everything working well. I'm currently on evolution x now

damprobot said:
Yes, everything working well. I'm currently on evolution x now
Click to expand...
Click to collapse
same issues i faced but lost imei strange

damprobot said:
I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol
Click to expand...
Click to collapse
would you pls tell that what is mpt partotions. and what if the partitions is blue then whats the case? and what to look at. and 2nd i also unbrick ny phone using 9008 method eith 11g dzextracted. i was then flashed my own stock of eaw but my dual sim phone was now showing single sim. after that i flash many kdzs but no success.