Hey guys, my friend recently bought an LG G2 on Sprint, but switched carriers to T-Mobile. He rooted his phone successfully, and tried to install custom recovery but downloaded some app that screwed up his phone (not completely sure what happened... he told me he installed a flashing app that flashed recovery but long story short, his phone is in a boot loop.) I can access download mode, and fastboot. When I connect the phone to the computer, my Windows 8.1 Laptop, nothing pops up. I already installed ADB and Fastboot, and when I put the phone into fastboot mode and plug it into the computer, it is recognized but keeps saying "oops!" connection to USB failed trying again.... fastboot ready! etc. etc. I installed the LG Flash tool but the computer won't recognize my device in device manager! I'm really frustrated why it won't recognize it. It shows nothing except ACER Fastboot Device. I just want it to recognize it in download mode so i can flash it back to stock with the LG Flash tool.
Pls halp.
I had to download lg universal drivers for my laptop to recognize my phone in download mode give that a try
im in the same boat as the op. i have tried to install various drivers. im able to get into download mode but no communication with the comp. i try going to recovery but it is gonna and i see some type of fastboot. unsure where to go from here...
This is exactly what i did
Www.rwilco12.com/forum/showthread.php?tid=96
My phone wasnt recognized by laptop until i was in download mode with flash tool running
not finding the ports under device manager anywhere.
Hi
I also have issue with don't recognized device in device manager. Did you solve this issue?
P.S. I have another G2 with normal running android. This G2 has normaly recognized in device manager. So problem not in cable or usb port's.
kdm212 said:
not finding the ports under device manager anywhere.
Click to expand...
Click to collapse
does the computer make a noise when you plug in the device? Also are you sure your in download mode ? (not just the dots) If you have just the dots, then go info fastboot mode and flash both the boot.img and laf.img then reboot into download mode and see if it works
I just put my g2 in download mode and pluged her up. in device manager it poped up under lge android modem, in the modem section of device manager.
Look there first. Then you will have to change the port to 41 so the flash tool will work
If you have qpst it will Tell you what port
Sent from my LG-LS980 using XDA Free mobile app
jcwxguy said:
does the computer make a noise when you plug in the device? Also are you sure your in download mode ? (not just the dots) If you have just the dots, then go info fastboot mode and flash both the boot.img and laf.img then reboot into download mode and see if it works
Click to expand...
Click to collapse
Have the same problem as the OP.
PC don't make any noise.
Yes sure, have a download mode screen on display.
Can't access to fast boot:
1) When i press Vol Up + plug the cable, have a download mode, but PC show nothing in device manager.
Stuck on this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) When i press Vol Down + power, have a factory hard reset screen which stuck if i agreed to factory reset.
3) When i press Vol up + Vol down + power, have a Hardware key control mode screen.
DEFNUB said:
I just put my g2 in download mode and pluged her up. in device manager it poped up under lge android modem, in the modem section of device manager.
Look there first. Then you will have to change the port to 41 so the flash tool will work
If you have qpst it will Tell you what port
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
OP says that device is not recognized in device manager!
demos98 said:
Have the same problem as the OP.
PC don't make any noise.
Yes sure, have a download mode screen on display.
Can't access to fast boot:
1) When i press Vol Up + plug the cable, have a download mode, but PC show nothing in device manager.
Stuck on this
View attachment 2912813
2) When i press Vol Down + power, have a factory hard reset screen which stuck if i agreed to factory reset.
3) When i press Vol up + Vol down + power, have a Hardware key control mode screen.
Click to expand...
Click to collapse
what i had to do when this happened to me, was swap out the device at sprint (had insurance), without insurance you can swap it for $75ish plus tax or if its still under warranty, go through LG
Could also try this thread :
http://forum.xda-developers.com/showthread.php?t=2582142
Related
I tried unlocking bootloader and root using Superboot. I got into Google boot loop then went to download mode and tried to restore to factory using odin. Phone connected went all the way to end and failed. Now I can not get into recovery or download mode. I just have yellow triangle screen. I cant use adb because laptop does not recognize device. what am I missing. Is there another file to download and use with odin?
So can you not get into the factory bootloader?
No I can not. All I get is yellow triangle between a phone icon and computer icon. When this happened on droid I could always odin a recovery folder. But I when I try that method I keep getting a failed error message
When I first rooted my PC was having trouble recognizing the phone as well. Make sure you have ALL of the drivers installed. The drivers for adb in recovery/boot are different that the drivers the GNex uses once boot into the OS.
Once it's plugged in, you have to actually go into Device Manager and find the "unrecognized device", then you select from a list of drivers. it will be called Android ADB or something along those lines.
you should be using fastboot not adb
mickrg123 said:
I tried unlocking bootloader and root using Superboot. I got into Google boot loop then went to download mode and tried to restore to factory using odin. Phone connected went all the way to end and failed. Now I can not get into recovery or download mode. I just have yellow triangle screen. I cant use adb because laptop does not recognize device. what am I missing. Is there another file to download and use with odin?
Click to expand...
Click to collapse
If you get a Yellow Triangle you are not bricked. Plugin phone and reload fastboot drivers. Try ODIN again or try to flash a custom recovery via fastboot.
I say "bricked" when I can't do anything with phone. I can not get into fastboot from yellow triangle screen.
mickrg123 said:
I say "bricked" when I can't do anything with phone. I can not get into fastboot from yellow triangle screen.
Click to expand...
Click to collapse
Fastboot IS the yellow triangle screen. If fastboot doesn't see any devices, you have a driver issue. Go into device manager and look for devices without proper drivers loaded (usually a yellow exclamation mark on the device)
Ok thx, Fastboot does not see any devices in device manager. I do have a second GNex when I connect it to computer it is recognized. How do I get drivers from fastboot?
mickrg123 said:
Ok thx, Fastboot does not see any devices in device manager. I do have a second GNex when I connect it to computer it is recognized. How do I get drivers from fastboot?
Click to expand...
Click to collapse
I hope all goes well for you. Try installed PDANET on the working Nexus, and get the drivers from their PC software.
http://droidmodderx.com/galaxynexus/unbrick-unroot-unlock-restore-your-galaxy-nexus-to-factory
boom
Samsuck said:
I hope all goes well for you. Try installed PDANET on the working Nexus, and get the drivers from their PC software.
Click to expand...
Click to collapse
+1 THIS ^^^^^
I do have drivers from pdanet installed. But this phone will not connect to laptop. I thought Fastboot screen was when you hold down vol up and down and power at same time.
I haven't encountered a yellow triangle screen you spoke of. Neither the fasboot or download mode should have that. Can you take a pic and post it?
Sent from my Galaxy Nexus using XDA App
I can't get past first adb command, says device not found
Here is screen I cant get past. (I don't think this is fastboot is it) And the odin error screen. Fyi nexus is just a sticker not on phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No that is not fast boot. Can you get into fast boot with Power, Vol +, Vol- ?
Sent from my Galaxy Nexus using XDA App
That's what I thought, someone had told me yellow triangle IS fastboot. I cannot get to any other screen!
I have had this screen on my Samsung Charge all I had to do was load stock .tar through odin, but I keep getting error message with this phone.
Are you able to get into Fastboot ( Power, Vol+, Vol-) or download mode (Power, Vol-) at all?
Sent from my Galaxy Nexus using XDA App
No I can not get to any other screen. Holding vol up, down and power, or holding vol down and power, all take me to same screen.
Hi,
I am not getting Qualcomm 9008 mode even after installing and reinstalling the drivers manually or via setup
I see this under Other Devices in device manager
QHSUSB__BULK
Then I ran miflash it worked fine as per following attached screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But when I unplug device and turn it on it does not show any thing, just a long (2/3 seconds) vibration and done
So basically I cannot get any thing on my screen, Plz help me to get to recovery mode, as if I get till that point
I would be able to flash a proper stock ROM form SD Card
(I have tried the things after removing SD card as well)
it is fixed now
I resolved it, the Diagnostics 9006 mode problem happened to my device twice due to various reasons
in first attempt I was seeing a lot of read only partitions when I connected phone, it was solve using QPST/QFill
before resolving this problem I was able to go to Stock recovery almost all the times but was unable to flash
any thing from there even with the use of SD card
2nd time the problem was same, but this time I was not seeing any partitions in my Computer
actually both times the real problem was going to proper 9008 mode which I finally got to know how to do it from
following thread
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
I feel I shall put the text as well:
If you were on Lollipop : Phone must be completely off. Pressing �Volume Up�
key plug the USB cable in WITHOUT PRESSING POWER BUTTON ! Port will open.
If you were on Marshmallow : Phone must be completely off. Plug the USB cable in
and immediately press Power On button. Port will open.
Since I bricked from Marshmallow, so I used the Plug in Cable + Power button only to got
to 9008 mode and once there I knew I can make a come back, which yet came after a couple of tries
as one has to click immediately on Download button when Qfil can see 9008.
Actually I bricked my phone a whole lot of times even after my post thats because once I knew that it is just soft bricked and I can get it back somehow, I got the confidence and tried advanced things that bricked my phone again and again
And it was only the recent time (around 3 weeks ago), that I figured the 100% working 9008 method for my phone
actually u have to drain the battery completely out then it will get 9008 mode to do it u shall try turning your phone on again and again so that battery goes off
For example: Press Power button for a few seconds to turn it on.
Or press 3 buttons at same time (VOL+, VOL- and Power), then release only Power button when you get vibration. Then after 2 seconds release both VOL buttons as well (this is for going to recovery mode)
This way you can drain all battery of phone, and you will know when the battery is all gone when you will press the Power button and phone will not show any LED light or screen light, it will just vibrate and will be off
Now you connect ur phone to PC in following way:
If at bricking you you were on Lollipop (Android 5): Pressing VOL+ key and plug the USB cable in WITHOUT PRESSING POWER BUTTON ! 9008 will open use Qfil to flash the ROM u want
OR If at bricking you were on Marshmallow (Android 6): Plug the USB cable in phone, then connect cable to PC and exactly at the same time press power button (some times u dont need to press power button so try with both options). Then if you see 9008 mode in Qfil, then immediately press the Download button in Qfil
If you see Qfil error then repeat the above process to get 9008 mode and use miflash instead of Qfil miflash worked for me better than Qfil from such situation as Qfil often gives error in between
And when you get the flashing 100% then phone will either auto restart or you have to restart it manually Using Qfil it shows u message when it is restarting the phone, and I think using miflash it just says process 100% complete then u have to restart phone yourself
Remember at this point (after restart) connect your phone charger properly in a electricity power socket instead of PC as the battery was already drained so you need to charge the device while it shows the long booting process due to new ROM flashed.
Good luck,
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I faced a similar problem described in this topic https://forum.xda-developers.com/re...-3-pro-boot-recovery-destroyed-t3938481/page3
When you turn on the phone an error pops up for 20 seconds and then phone reboots and everything goes in a circle.
If you press the power button once, the reboot process stops and the phone turns off.
I tried to enter fastboot mode by pressing the power + volume button -
But I didn't succeed.
Can you tell me what I'm doing wrong ?
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
kkffiirr said:
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
Click to expand...
Click to collapse
Thanks for the answer, but unfortunately due to this error fastboot does not load.
If you can tell me how I can flash the phone I will be very grateful.
I would not like to contact an unofficial service...
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
kkffiirr said:
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
Click to expand...
Click to collapse
Before lock, I installed TWRP, but idk if it's still there.
UMF cable will help me ?
Me i too i got same your problem i bricked my realme x2 i still didnt find the solution to flash it again
Maybe contact service center
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medusa Box; they seem to have underground connections with manufactors, they may provide a solution too.
EDIT. Thanks to the clarification from @T1MOXA, you can enter EDL mode by holding VolUp and VolDown and plugging the switched off phone to a computer.
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
yakovpol said:
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medisa Box; they seem to have underground connections with manufactors, they may provide a solution too.
Click to expand...
Click to collapse
I've tried this option before, but it led me to the same error screen.
I turned off the phone with a single press of the power button, then pressed all the buttons at the same time.
razu031 said:
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
Click to expand...
Click to collapse
I just got the same error.
When you connect the cable, the phone boots with the same error.
narshi shukla said:
Maybe contact service center
Click to expand...
Click to collapse
Unofficial ?
They too bad in my country.
They can easily make it worse.
I can buy a UMF cable, but whether it will help me I do not know.
What do you think ?
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
T1MOXA said:
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
Click to expand...
Click to collapse
Most phones will be able to flash in this mode using qfil tool,
But first you need to find necessary firmware, idk if stock rom downloaded from official site will work or not, maybe fastboot one will work.
This mode is called emergency download mode (edl).
But pls do a lil research as its a newly launched device and you can easily mess it up.
BTW exact same error(boot recovery destroyed) is common error on realme Phones and it can be fixed by flashing vbmeta.img using fastboot.
See attached image for reference only
The 1kb vbmeta is modified to bypass boot verification.
Idk if such vbmeta is available for x2.
If not then flashing stock vbmeta might work.
T1MOXA said:
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
Click to expand...
Click to collapse
I have the same problem. On 4pda there is a firmware for MsmDownload Tool and the tool itself, but it requires a username and password. Are there alternative options to restore your phone?
Problem: The current image have been destroyed and can not boot
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Iamsanthoshravi said:
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Click to expand...
Click to collapse
Look friend i had the same problem and i fix it u have to download the firmware RMX1991 not ozp file then u have to buy the password of the firmware there are sone website they ask you to install teamviewer because thet gonna flash your phone online ok friend i did as i mentioned and i fixed so there is no other way to fix it i cant put the link of firmwares because last time xda warned me
I got same
Hey bro can you fix your phone?
Today I experience same.
What can I do now?
Device Name: Sony Xperia XA2
Device ID: H3113
Internal Storage: 32 GB
Software Version: Android 8.0.0
What i want to do: Install LineageOS 19.1 on the phone.
How far i got: I'f been trying to follow the instructions here https://wiki.lineageos.org/devices/pioneer/install
However after 2 hours and no progress i decided to ask on XDA...
On the PC i installed platform-tools_r33.0.2 for windows and UniversalAdbDriverSetup
Then i added this path %USERPROFILE%\adb-fastboot\platform-tools to "Environment Variables"
On the Phone i have USB Debugging Enabled also OEM and Bootloader are both unlocked.
I am ready to install LineageOS however when i connect the Phone to the PC and check device manager there is a yellow marker, something is not right.
The Phone asked me what shall be transfered and i selected data, still the PC doesnt seem to "like" the phone.
I have installed LineageOS on a samsung device before and there only difference i can spot now is that for samsung i installed usb drivers on the pc, however for sony i cannot find usb drivers for the Xperia XA2. Do i need these and where do i get them??
I have noticed another "issue" when i try to boot the phone in recovery by pressing Volume Down + Power, the phone vibrates once and the screen goes on fully white with the sony logo.
After that nothing happens i continue to press Volume Down + Power and everything repeats, phone reboots, vibrates once and shows sony logo, this will go forever untill i stop pressing Volume Down + Power and the Phone now boots normally to system. It seems i cannot boot into recoverymode?
The phone is acting wired, when i press Volume Up and connect it to the usb/power cable sometimes it does nothing and shows the battery % while sometimes it boots to system and sometimes i managed to get into download/fastboot mode where ican see a blue light but the screen remains off.
I was going to install TWRP with ADB but since the phone isn't showing on the PC i cannot continue, i have no idea what to do... cant be so hard can it? So many people flashed lineage on this phone so there really should be a way... i hope someone can help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, I believe I have the same issue.
When pressing "volume up" (for bootloader) while connecting the USB cable I get an "Android" device without driver. I've tried several drivers without result. Emma sees the phone (but gives "device locked"), Windows sees the phone, adb sees the phone, but when in bootloader... no result.
Any assistance is welcome.
WIndows 10 64
Xperia XA2 (H3113)
You have to know how your device is presenting: ABD? Fastboot? Bootloader?
You need to look in Device Manager and identify devices that are not happy.
Try to install a stock driver. If you can't, then identify the VID/PID of the device.
You may need to make a copy of the stock Google .inf file and make new entries for your device.
Then you can try to install that, although you'll have to use the procedure for unsigned drivers.
In any case, if things are not going right, don't bother with long adb or fastboot commands. Just try.
Code:
C:\>adb devices
...
C:\>fastboot devices
...
Thanks for the reply,
While stock android is started
ADB gives:
List of devices attached
CQ3001ERRN device
Fastboot devices: No result
Reboot phone in flash mode (Volume down): Emma recognizes phone(but locked)
Reboot phone in recovery (Volume up): Unknown Android device.
When trying to install the Google driver (or any other related) I just get: could not find the driver for your device. In my view this has nothing to do with unsigned (message is different).
Uninstalling "Android" and re-installing it, does not help, picking it out of the list of available drivers does not help.
"You may need to make a copy of the stock Google .inf file and make new entries for your device."
How would one proceed with this, keeping in mind that when the phone is booted using stock ROM it is fully recognized as a Xperia XA2?
Any advice is welcome
A device needs drivers for every single different mode that it can be in.
For the thing that you can't load drivers on, you need to get the VID/PID and if there is an MI.
Just go to DeviceManager > MysteryDevice > Properties > Details > Device instance path
From DM it's not possible to see if this is ADB or Fastboot but the driver is the same.
Copy over the Google .inf file to your own.
Add what you found in DM to look just like the others.
Note that you need to enter the same line twice in the NTx86 and NTamd64 sections.
When you try to install a driver using your .inf it will obviously be unsigned.
Do the restart PC with allow unsigned and install.
@Renate You have made me a happy man.
I'm looking at a Xperia with LineageOS running smoothly
Thank you for your instructions
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
try 'fastboot --set-active=other' or unbrick with MSM Download tool or https://github.com/bkerler/edl
chizari said:
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
View attachment 5813705
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
Click to expand...
Click to collapse
bro just use the msm tool. there's a tool for every variant of the 9 pro (LE2120-2125). Look for the post on our Device xda and use it.
aIecxs said:
try 'fastboot --set-active=other'
Click to expand...
Click to collapse
cmd says: fastboot: unknown option -- set-active=other
I think it doesn’t understand what‘s --, maybe ’cause i dont have libraries or drivers
ishansnp said:
bro just use the msm tool. there's a tool for every variant of the 9 pro (LE2120-2125). Look for the post on our Device xda and use it.
Click to expand...
Click to collapse
i know about msm tool, but i cant enter in qualcomm emergency mode, cause when i connect phone to pc, it starts charging and when phone starts charging it can’t load “charge image” and gives same error as in the attachment
chizari said:
i know about msm tool, but i cant enter in qualcomm emergency mode, cause when i connect phone to pc, it starts charging and when phone starts charging it can’t load “charge image” and gives same error as in the attachment
Click to expand...
Click to collapse
turn off the phone fully, press volume up and down fully for 3 seconds then while still holding those buttons, plug in the phone with MSM open on your laptop. it should immediately detect the device. the phone screen will still be black and thats normal. once device is shown as connected, just select target O2 and start
disconnect usb, let battery drain, ensure it is really powered off, press both volume keys, connect usb
chizari said:
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
View attachment 5813705
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
Click to expand...
Click to collapse
MSM Tool time. What model do you have?
aIecxs said:
disconnect usb, let battery drain, ensure it is really powered off, press both volume keys, connect usb
Click to expand...
Click to collapse
ok, i ll try
TheGhost1951 said:
MSM Tool time. What model do you have?
Click to expand...
Click to collapse
LE2123
chizari said:
LE2123
Click to expand...
Click to collapse
Get the MSM tool for LE2123 from this thread....
How To Guide OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
Does somebody know how long it takes to let battery drain from 100%?
And maybe, Are there some advices how to let battery drain faster?
You will also need to 1) disable driver signature see this https://www.techpout.com/disable-driver-signature-enforcement/ then reboot computer 2) install latest OnePlus USB drivers then 3) install latest Qualcomm driver then reboot PC 4) start the MSM Tool uncheck 256 and check use lite firehose the click start. 5) start phone in edl mode with button sequence.... MSM should automatically start flashing!
As for edl mode, check to see if you can get to fastboot by holding vol + and - and power buttons down and hold them to see if fastboot loads. This is if you cannot get to edl the button wat as described above.
TheGhost1951 said:
As for edl mode, check to see if you can get to fastboot by holding vol + and - and power buttons down and hold them to see if fastboot loads. This is if you cannot get to edl the button wat as described above.
Click to expand...
Click to collapse
Fastboot menu loads
Now i need to wait few days to let battery drain…
Maybe you know any advices how to let it drain faster?
chizari said:
Fastboot menu loads
Now i need to wait few days to let battery drain…
Maybe you know any advices how to let it drain faster?
Click to expand...
Click to collapse
No need to wait.... Do you have the latest platform-tools installed on PC?
TheGhost1951 said:
No need to wait.... Do you have the latest platform-tools installed on PC?
Click to expand...
Click to collapse
Yeah, i installed it with android studio
chizari said:
Yeah, i installed it with android studio
Click to expand...
Click to collapse
Good now download this file and save it to the platform-tools folder and change the name to twrp.img.... https://dl.twrp.me/lemonadep/twrp-3.7.0_11-0-lemonadep.img make sure the phone is connected to PC in fast boot mode if you have already installed all the drivers....
TheGhost1951 said:
You will also need to 1) disable driver signature see this https://www.techpout.com/disable-driver-signature-enforcement/ then reboot computer 2) install latest OnePlus USB drivers then 3) install latest Qualcomm driver then reboot PC 4) start the MSM Tool uncheck 256 and check use lite firehose the click start. 5) start phone in edl mode with button sequence.... MSM should automatically start flashing!
Click to expand...
Click to collapse
here you mentioned qualcomm drivers, you mean Qualcomm HS-USB QDLoader 9008 Drivers
chizari said:
here you mentioned qualcomm drivers, you mean Qualcomm HS-USB QDLoader 9008 Drivers
Click to expand...
Click to collapse
Yes