hello all bro
i have p6-u06
only hung at huawei ascend
cant go recovery using volum down and power
please hellllllllllllllllllp
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
i did but not slove please help me
i download this
http://consumer.huawei.com/en/mobile-phones/support/downloads/p6-u06-en.htm#anchor
and i put dallod insid memory
and follw instraction but cant go to donloawd mod
please help me
im sosorry my langug is wake
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
iafter put software dallod insid memory card
i choos apply update from extrnal storge but not slove fail
nokia alkng said:
any one help me plaz
Click to expand...
Click to collapse
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
and if you allow debuging mode (Spam the build number in settings > More info and you will be allow to access to the dev section (in settings) and tick debugging mode then connect to your pc (check the debugging mode in the notification bar)) you can now access to the recovery using adb
For Adb you can dl it here > http://forum.xda-developers.com/showthread.php?t=2636231 and follow the instruction to connect your phone then write this line in the command window
Code:
adb reboot recovery
your phone will boot into recovery
To update The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
The version you have dl is old, latest JB is B132 and KK is B513 for the p6-u06 international (these rom are multilanguages)
Skyllery said:
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have
create it
and if you allow debuging mode you can access to the recovery using adb
Code:
adb reboot recovery
Click to expand...
Click to collapse
bro im so sorry to late but phone cant boot and no usb debug and stell hung logo android plz.please pleassss help me:crying:
bro
USB Debuggin not open plz help me pleaseeeeeee
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Hello,
I´m Trying to make this (http://forum.xda-developers.com/show....php?t=2630208) work on my Huawei,
but i´ve run into some problems.
I cant get my phone to go in fastboot and ADB keeps saying Waiting for devices or says Error device not found.
This image shows what im getting if i connect my phone to my PC and reboot it using VOL UP + VOL DOWN + POWER
(USB Update Enter. . .
HUAWEI SDCARD AND USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.)
im sure my phone is running the right Firmware ( B118) here is a screenshot please tell me if im doing anything wrong.
please help
nokia alkng said:
help me pleaseeeeeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Tried the search-function yet?
There are several howto's for it
nokia alkng said:
who help me i will donat himmmmm:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi guys,
I can get to recovery mode and the initial splash screen, but not into Android OS on my Huawei p6 U06.
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
I tried to adb the phone but there are no suitable drivers for phones in recovery mode... only for USB developer mode...
Hopefully there is a fix to this.
Thanks guys.
nokia alkng said:
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Click to expand...
Click to collapse
The debugging mode is off so the device can't be found by adb.
If you can't use stock recovery and you can't flash any recovery because you can't access throught adb, your phone don't boot .. I don't know what to tell you .. your phone is dead ? .. how your phone is in this condition ?
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
Click to expand...
Click to collapse
Fake Ascend P6 or not the good version so the update brick the phone ?
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
nokia alkng said:
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
Click to expand...
Click to collapse
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Click to expand...
Click to collapse
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
ok bro
thanx i was busy to day
so i will try tomorow
thanx aloot again
Skyllery said:
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
Click to expand...
Click to collapse
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
nokia alkng said:
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
Click to expand...
Click to collapse
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
hi bro
i format sd card 2 gb fat32
and put dlaod insid memory card and go recovery and i changed other sdcard sandisk 4gb but not slove my problem please help me
Skyllery said:
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
Click to expand...
Click to collapse
bro bro bro:crying::crying::crying:
i did i format and chang 3 memory card and same problem
pleaeeeeee help :crying::crying:
Related
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
test it and reply the queries
Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,
srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm
Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not
Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7
Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS
some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?
Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there
I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.
ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation
i like your rom
i like your rom and i'm waiting for your next rom~
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
hamzafoad said:
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
Click to expand...
Click to collapse
details pls. soft brick, hard brick? does it start or just blackscreen, etc
wulfy1000 said:
details pls. soft brick, hard brick? does it start or just blackscreen, etc
Click to expand...
Click to collapse
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
hamzafoad said:
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
Click to expand...
Click to collapse
that is softbricked.update app on card and start phone with vol up+vol down
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
wulfy1000 said:
hamzafoad said:
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
i really need help plz culd someone help me
Click to expand...
Click to collapse
hamzafoad said:
hamzafoad said:
i really need help plz wi someone help me
Click to expand...
Click to collapse
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
hamzafoad said:
surdu_petru said:
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
so how did u fix it.
Click to expand...
Click to collapse
I would redownload the update.app. the zip could be corrupted. Also make sure when you unrar it use 7zip or winrar. Once i used the windows archiver and it wouldn't work.
Sent from my P6-U06 using xda app-developers app
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
markteunis said:
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
Click to expand...
Click to collapse
'' it goes into boot look during '' ? Please explain.
ZuperStyler said:
'' it goes into boot look during '' ? Please explain.
Click to expand...
Click to collapse
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
markteunis said:
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
Click to expand...
Click to collapse
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
bokchoi2020 said:
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
Click to expand...
Click to collapse
Thanks I tried both with no succes
If I go in huawei recovery by pressing Power + volume up +volume down and do a full wipe HAM will reboot itself automatically after 10 secs still get stuck in Boot screen Huawei Ascend after reboot.
I formatted the SD and put the Update.app in dload folder. HAM is not connected to PC. Still it comes no further then checking system before it switches itself off agian.
I am getting desperate Thanks for the help so far:highfive:
Still have problem, nothing seems to work!
Anybody else that might be able to help?
BTW. Anyone tested if multiloader works on soft bricked phones:
http://forum.xda-developers.com/showthread.php?t=2618253
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
piepsys said:
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
Click to expand...
Click to collapse
Only soft bricked, install stock recovery.
http://forum.xda-developers.com/showpost.php?p=51066019&postcount=14
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
two more questions...
1) is it important which original firmware version?
2) i have downloaded the "Huawei Update Extractor" ... what to do with it? Do you have a link for the stock recovery? I haven´t read s.th. about it :-/
Regards
piepsys said:
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
Click to expand...
Click to collapse
Just updated my last post same time when you wrote.. check the link
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
piepsys said:
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2588979
Press y and then n
Then download http://www.androidfilehost.com/?fid=23252070760973625
and extract it to c:\adb then press sift and right click and go to open commandwindow here
then write: adb reboot bootloader
then: fastboot flash recovery recovery.img
and last: fastboot reboot
Then download firmware (latest international is: https://mega.co.nz/#!N8BAxZYJ!8cOp8imgnLxNMfUjCDoBtzR69tz7nLYccL2-VMG4If8 ).
Extract that and make dload folder to your external sd card. and put update.app in to it.. then press power+volumeup+volume down when phone restarts, and it starts to install stock firmware
worked! thanx a lot for your help!!!
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
i'll try this one
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
Fixed the adb drivers though: http://forum.xda-developers.com/nokia-x/general/fix-updated-adb-drivers-nokia-x-v1-2-4-1-t2835827
Still, nice job.
Dom3616 said:
Fixed the adb drivers though: http://forum.xda-developers.com/nokia-x/general/fix-updated-adb-drivers-nokia-x-v1-2-4-1-t2835827
Still, nice job.
Click to expand...
Click to collapse
when i try to install the .zip file .it say installation aborted?anyone?help please?578
Can't enter to Bootloader mode
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this [....]
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
I can't enter Bootloader mode.. it just nokia logo only for long time...
cheppimme said:
I can't enter Bootloader mode.. it just nokia logo only for long time...
Click to expand...
Click to collapse
Flash stock rom. You did something wrong.
Sent from my Nokia_X using XDA Free mobile app
I'm confused.
Dom3616 said:
Flash stock rom. You did something wrong.
Click to expand...
Click to collapse
Can you tell me more how to do for details?
cheppimme said:
Can you tell me more how to do for details?
Click to expand...
Click to collapse
Search Nokia X General section.
error
Mr.MadScientist said:
Hello.
Me too.
I can not install your update.
I allocated it into the sd card, I started the recovery, but it gave me out "installation aborted" .
I tried to install the cwm recovery with nokia x manager (with the right drivers and everything as you said), but the process hangs at nokia initial logo , and is necessary to remove the battery (after 60 min) for restart the phone. Nokia flash , however, if I try to install it on windows professional 32 bit ( the only windows I have, because I use linux) , tell "is not an application for 32-bit" .
Thanks for your work.
Click to expand...
Click to collapse
Then goto CWM Recovery Thread for Nokia X and learn how to manually flash it.
The update package won't work on Stock Recovery.
Dom3616 said:
Then goto CWM Recovery Thread for Nokia X and learn how to manually flash it.
The update package won't work on Stock Recovery.
Click to expand...
Click to collapse
I apologize for my error but I had write on the wrong thread.
I have not tried the solution proposed here , I tried the solution proposed in the other thread, with the update 1.2.4.1 .
Unfortunately they were open both and I responded to the wrong one.
I hope you will forgive me and especially yoann44 .
I can not download the package because i think that in my country is impossible to pay . I continue to put the code but says it is wrong.
Nor with safari or google chrome I can finish the procedure.
How can I do?
I don't understand about what are you saying, I think you phone is full brick if you are unable to enter in Bootloader Mod, so check your productcode and discribe you problem
Just Download and Follow the Guide from Below Links if you are able to enter in bootloader mode (Half Brick). Otherwise claim you warranty.
Nokia X Flasher are free by Devs.
Nokia X Offical Rom
selmopn said:
i'll try this one
Click to expand...
Click to collapse
and?
Ok now I tried it but without success.
I have done everything.
However :
1) "done" it never arrived even after half an hour
2 ) I repeated the operation
3 ) at the end everything is back (hopefully) normal without root
For me, this method does not work: installation aborted.
So you are removing some apps from system/app
Sent from my Nokia_X
adeebulrehman said:
So you are removing some apps from system/app
Sent from my Nokia_X
Click to expand...
Click to collapse
Yes, facebook , twitter and one drive .
It can be the cause?
If it is necessary I can do a factory reset ...
I do it?
Mr.MadScientist said:
Yes, facebook , twitter and one drive .
It can be the cause?
If it is necessary I can do a factory reset ...
I do it?
Click to expand...
Click to collapse
You can remove app the apps that you don't need.
[MOD][Flashable] Remove all Bloatware apps from system/app Partition within 2 Seconds
Attached is the flash able zip file read the instruction from above post and edit script file from attached as per you requirement.
I have removed Mix Radio, Music, Store, Launcher, Keyboard and replaced them with Google Ones
adeebulrehman said:
You can remove app the apps that you don't need.
[MOD][Flashable] Remove all Bloatware apps from system/app Partition within 2 Seconds
Attached is the flash able zip file read the instruction from above post and edit script file from attached as per you requirement.
I have removed Mix Radio, Music, Store, Launcher, Keyboard and replaced them with Google Ones
Click to expand...
Click to collapse
Thank you very much! But to be sure I 've done the factory reset and I will use after your precious advice , the apps have been restored , but the process does not work've done the factory reset, the apps have been restored, but the process does not work.
OK Try It, If you need help let me know
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
Why it's necessary to pay from software that is free form the autor's site?
The proposed solution isn't working on 1.2.4.1 is there another usefull solution to root?
joaofsantosj said:
Why it's necessary to pay from software that is free form the autor's site?
The proposed solution isn't working on 1.2.4.1 is there another usefull solution to root?
Click to expand...
Click to collapse
pay off? who said he had to pay ??? lol ... my tutorial is functional! anyway, there's no point really, because since then, the problem was corrected in USB drivers, so possibility via toolkit x or nokia manager ^^
I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.
OK...then there should be the Option to install/flash a stock recovery..
here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??
yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you
Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:
you are welcome
Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??
yes will be enough..
bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.
you should not make a ZIP file..
now you are at then beginning again..