Help please bootloop - Galaxy Tab 3 Q&A, Help & Troubleshooting

Hey guys I just picked up a Galaxy Tab 3 Lite. I tried rooting it and installing a custom rom but ran into a problem. The tablet will not power on but if I plug it in to the computer or wall outlet, it turns on and off with the Firmware upgrade encountered an issue message. It literally flashes on and off with this message. I have tried getting into download mode and cwr but no luck. I also tried Kies but since the tablet wont stay on, it tells my my device is not supported. I spent countless hours searching the web for a solution. Anyone have any ideas?
This is the screen that just bootloops nonstop. http://imgur.com/YhvmL85

DozeBeatS said:
Hey guys I just picked up a Galaxy Tab 3 Lite. I tried rooting it and installing a custom rom but ran into a problem. The tablet will not power on but if I plug it in to the computer or wall outlet, it turns on and off with the Firmware upgrade encountered an issue message. It literally flashes on and off with this message. I have tried getting into download mode and cwr but no luck. I also tried Kies but since the tablet wont stay on, it tells my my device is not supported. I spent countless hours searching the web for a solution. Anyone have any ideas?
This is the screen that just bootloops nonstop. http://imgur.com/YhvmL85
Click to expand...
Click to collapse
Is that not download mode... does it say odin mode at the top??
---------- Post added at 09:58 PM ---------- Previous post was at 09:56 PM ----------
zach61797 said:
Is that not download mode... does it say odin mode at the top??
Click to expand...
Click to collapse
Download samsung kies and do what it says it will take you back to stock

zach61797 said:
Is that not download mode... does it say odin mode at the top??
---------- Post added at 09:58 PM ---------- Previous post was at 09:56 PM ----------
Download samsung kies and do what it says it will take you back to stock
Click to expand...
Click to collapse
The tablet will do nothing but turn on and off when I plug it in to the wall or the pc. I cannot make it do anything. When its not plugged in to anything it will not power on.

DozeBeatS said:
The tablet will do nothing but turn on and off when I plug it in to the wall or the pc. I cannot make it do anything. When its not plugged in to anything it will not power on.
Click to expand...
Click to collapse
Have you tried to restore with kies

zach61797 said:
Have you tried to restore with kies
Click to expand...
Click to collapse
I have. Since the tablet just continues to turn off and on, Kies cannot establish a solid connection to do anything.

Related

Rooted T989 won't connect to computer

So my phone won't connect to the computer, I have tried everything Kies on Mac, Kies Air, and Kies on PC and none of it is working.I'm running LiquidSmooth rom if that makes a difference. Please help.
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Sent from my SAMSUNG-SGH-T989 using xda premium
You could also try uninstalling and reinstalling the Samsung driver for your PC.
SolMinor said:
So my phone won't connect to the computer, I have tried everything Kies on Mac, Kies Air, and Kies on PC and none of it is working.I'm running LiquidSmooth rom if that makes a difference. Please help.
Click to expand...
Click to collapse
UmarZahid said:
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
20twins10 said:
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
Click to expand...
Click to collapse
so if i stop the usb storage it becomes unavailable and im guessing another battery pull would be nexessary..
---------- Post added at 01:57 AM ---------- Previous post was at 01:18 AM ----------
20twins10 said:
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
so if i stop the usb storage it becomes unavailable and im guessing another battery pull would be nexessary..
Click to expand...
Click to collapse
so i did a pull, got into recovery, booted back to the system, plugged in and usb did in fact work.. however.. once i disconnected and tried to reconnect, it would not.. even more battery pulls wouldnt let it reconnect..
Try reinstalling/flashing the ROM again, along with GAPPS and the wipe (if you're in CM10 by installing the wipe, then CM10, then GAPPS) or if you're in something else, try reflashing if the USB connection bothers you
Sent from my SAMSUNG-SGH-T989 using xda premium
Settings<storage<menu<USB computer connection < enable mass storage.
UmarZahid said:
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Click to expand...
Click to collapse
Thank you so much for this Umar, it was so simple that I have never thinked about this solution.
After trying on several different computers, with different cables, cleaned my phone mUSB mother connector with alcohol and put in some compressed air, changed 4 different ROMs, your solution solved my issue and now it works like a charm.
Thanks again!
:good: :victory:
LE: I didn't boot into Recovery, just Powered OFF my phone, pulled out the battery, waited about a minute and turned ON the phone.

[Q] T-Mobile Galaxy s4 (First Root)

I have a T-mobile Samsung Galaxy s4 and this is my first root I've ever attempted.
Been trying to root my device for the past 5 days using various methods which include towelroot, odin 3.7, odin 3.10 and other methods. I even watched the video how to root it from xda. But I am just not having any luck. I have everything updated on the device thats updated from kit kat 4.4.4 and everything is stock.
Odin is just not connecting to my device while in download mode and I have also updated the usb driver as well from the samsung website. and when i plug my phone into my computer while the device is on it recognizes the device on my computer. So I really do not know what to do now.
Any advice or suggestions that I should part take on?
mike_yoshi said:
I have a T-mobile Samsung Galaxy s4 and this is my first root I've ever attempted.
Been trying to root my device for the past 5 days using various methods which include towelroot, odin 3.7, odin 3.10 and other methods. I even watched the video how to root it from xda. But I am just not having any luck. I have everything updated on the device thats updated from kit kat 4.4.4 and everything is stock.
Odin is just not connecting to my device while in download mode and I have also updated the usb driver as well from the samsung website. and when i plug my phone into my computer while the device is on it recognizes the device on my computer. So I really do not know what to do now.
Any advice or suggestions that I should part take on?
Click to expand...
Click to collapse
Download Kies and let it install the drivers. Once done you can remove Kies.
I use Odin 3.07. If Odin sees your phone use CF-AUTO ROOT to root your phone.
i did just that and retried and did nothing towards connecting during download mode
Are you opening Odin after you plug the device in? If so does it say a message, something about 'added!'
serio22 said:
Are you opening Odin after you plug the device in? If so does it say a message, something about 'added!'
Click to expand...
Click to collapse
I tried both:
-connecting it before opening odin
-connecting it after opening odin.
----------------------
I think I'm just not ment to root this phone haha
but it does not say anything about being connected.
mike_yoshi said:
I tried both:
-connecting it before opening odin
-connecting it after opening odin.
----------------------
I think I'm just not ment to root this phone haha
but it does not say anything about being connected.
Click to expand...
Click to collapse
Try different usb ports, down to the last one.. If the problem persists it might be the drivers.. In this case, uninstall kies and install drivers from Samsung
serio22 said:
Try different usb ports, down to the last one.. If the problem persists it might be the drivers.. In this case, uninstall kies and install drivers from Samsung
Click to expand...
Click to collapse
i have done this as well. could this be my transfer cable? the computer recognizes my phone when the device is on. but when the device is off and it download mode it doesn't install the driver. I hear the negative sound when i try and connect the device on my windows 7 laptop.
mike_yoshi said:
i have done this as well. could this be my transfer cable? the computer recognizes my phone when the device is on. but when the device is off and it download mode it doesn't install the driver. I hear the negative sound when i try and connect the device on my windows 7 laptop.
Click to expand...
Click to collapse
If its aftermarket, it might be
serio22 said:
If its aftermarket, it might be
Click to expand...
Click to collapse
I will test the theory later tonight in an hour. I'll keep you posted, thanks for your help =]
Tested the theory of the 'aftermarket cable'
used my original cable that the phone came with, and it still did not connect while in download mode.
I have no clue what I am doing wrong.
Do you have kies installed? If so uninstall it, reboot, and try again
I have the Samsung Galaxy Tmobile with same dillema.
Been trying for 3 hours on my first root as well with one successful passing root that did not root like it said.
yardclean said:
Been trying for 3 hours on my first root as well with one successful passing root that did not root like it said.
Click to expand...
Click to collapse
What method are you using?
Method used
I used Philz touch 6.08.9. A tar MD5 file
---------- Post added at 12:30 PM ---------- Previous post was at 12:24 PM ----------
And Odin3 v3.09
---------- Post added at 12:37 PM ---------- Previous post was at 12:30 PM ----------
it said it was successful but when I ran a check for root it came up negative
I had a similar problem once, chased it for hours to find a usb problem. Best test for that is connect the phone via Kies (usb, not wireless) and try to transfer files. If you can't get a file from your phone to the computer you have a hardware problem: usb port, cable, computer, or in the phone itself.

[Q] LG G3 Unbricking steps clarification

This Problem is solved and worked successfully
wouldn't fix or unbrick my phone without the help of these guys , all my respect goes to ::
@willcracker
@os_man
@setul34
@l33tlinuxh4x0r
@sd_shadow
if this thread was useful to you please donate to them with a cup of coffee
Hi XDA
i didn't want to make it a long thread but i have to , bare with me here :
first i followed that topic on XDA : http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
i tried to install twrp with imageprep but after rebooting it says secure booting error or something like that
i also tried this after that but with the same error https://www.youtube.com/watch?v=2we1YDc5JGU
but always the mobile was rebooting and opened like nothing happened
so i searched the internet for a solution i tried this one : https://www.youtube.com/watch?v=4YZ0i6aFsfM
but i guess the file attached weren't compatible so it ends up with an error before doing anything so there was no option except this : http://forum.xda-developers.com/lg-g3/help/help-secure-boot-error-trying-to-boot-t3054977
and here comes the misery , cuz i just got my phone and after the step while you write the commands in the android terminal emulator
and BOOM everything went black
NO BOOT , NO RECOVERY , NO DOWNLOAD MODE , absolutely NOTHING :crying: i freaked out a lot , but after searching for 3 days i've found this xda thread : http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
sadly i'm now on LGE AndroidNet USB port (com 11)
and what i'm getting from this thread that i've to short circuit two pins in my LG G3 Motherboard so i can switch LGE AndriodNet USB Port to Qualcomm 9008
Before anything else i want to make sure that i'm on the right track so just want to approve these steps :
1- open the phone
2- to make the device read as "Qualcomm 9008" not as "LGE AndriodNet USB Modem" i have to :
a- short cut the pins in the photo you provided "without the battery" for 3 minutes
b- connect the phone with the USB cable in the computer "without the battery"
c- my PC will detect the device as "Qualcomm"
3- after that i'm good to use your LG G3 unbrick method
are these steps right ?
just need to know when to plug in my battery and when i connect the phone with the cable , the pins must be connected or i can just connect the pins for 3 minutes and then remove the connection between them ?
Please anyone answers me with the exact steps or give me a short video on how to do it alone because i'm still rookie at these stuff
thanks xda members :fingers-crossed:
Am i posting in the wrong section or what ?
Evilix said:
Am i posting in the wrong section or what ?
Click to expand...
Click to collapse
If you have asked for help in the threads you have linked, without receiving a response, you can try quoting someone that may know or use @ before their user name like @sd_shadow
This is a very technical and likely very few people have even attempted it, so it may be awhile before the right people log in to XDA and see your post.
This thread will be moved to G3 Q&A, Help & Troubleshooting
I too am having issues with my LG G3 trying this method but the thread linked has been closed.
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
setul34 said:
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
Click to expand...
Click to collapse
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
setul34 said:
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
Click to expand...
Click to collapse
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
l33tlinuxh4x0r said:
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
Click to expand...
Click to collapse
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
THANKS ALL for replying and i will try again 2 mins this time
setul34 said:
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
Click to expand...
Click to collapse
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
l33tlinuxh4x0r said:
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
Click to expand...
Click to collapse
so are you done with BoardDiag tool? and can you go in download mode ?
setul34 said:
so are you done with BoardDiag tool? and can you go in download mode ?
Click to expand...
Click to collapse
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
have you checked your port# in device manager ? and in BoardDiag tool ? are those same ?
---------- Post added at 10:41 PM ---------- Previous post was at 10:37 PM ----------
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
Maybe @os_man can help you with this error. i'm exactly not sure about this error.
is someone stuck at unknown USB device (something something) ??
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
l33tlinuxh4x0r said:
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
Click to expand...
Click to collapse
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
Evilix said:
is someone stuck at unknown USB device (something something) ??
Click to expand...
Click to collapse
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
please give me the right working link for the qualcomm drivers , thanks in advance
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
here are the drivers http://www.androidbrick.com/?wpdmdl=3173 both 32 bit and 64 bit but remember that you have to turn off driver signing if using a 64 bit OS.
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
l33tlinuxh4x0r said:
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
Click to expand...
Click to collapse
try to go back in downloading mod. if you cant then can u tell me what step u did in BoardDiag tool
---------- Post added at 11:15 PM ---------- Previous post was at 11:11 PM ----------
Evilix said:
please give me the right working link for the qualcomm drivers , thanks in advance
Click to expand...
Click to collapse
here you go.
http://www.androidbrick.com/download/qdloader-hs-usb-driver/

S4 mini does not turn on, and does not work recovery mode. Works only download mode

Hello,
I have a problem with a s4 mini i9195.
The phone dones not start and don't start the recovery mode.
I try to flash a firmware with Odin, but don't worws, Odin it blocks on:"initialization..." or "SetupConnection...".
I think this is due to the fact that it is not active the USB Debugging on the phone.
It is possible? if yes, how i can fix the problem? can i activate the usb debugging in download mode?
Thanks in advance
Same problem here. Even playing around with pit-files etc didn't help.
Have you found a solution?
You guys might have tried it but i will still say it. Try antivirus off, Install kies and samsung drivers. Close Kies from task manager. Run odin as admin and Change USB slot or try another USB cable.
I got this initialize error two times and it scared the **** out of me, i thought my phone is gone. but by turning off antivirus and changing usb slot it work.
Hope you guys fix your phone
did anybody resolved this problem?
---------- Post added at 09:41 PM ---------- Previous post was at 09:15 PM ----------
does anybody resolved this problem?

Bootloop on download mode.

Hello everyone,
I've tried to flash a rom using odin on my J610G and it failed. Now while trying to get into download mode the device restarts automatically. It's recognized by the computer but it won't stay on download mode. It won't boot into the OS since it prompts "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
I tried the smart switch but it won't stay on it, It keeps restarting. Any suggestion ?
I have the exact same problem too! It's so frustrating coz I just can't get my phone to stay on Odin mode without it restarting to that stupid error screen:crying:
Simple. Charge your battery with the mains charger, its flat.
Did you find a fix?
---------- Post added at 06:16 PM ---------- Previous post was at 05:39 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help.
---------- Post added at 06:51 PM ---------- Previous post was at 06:16 PM ----------
ashyx said:
Simple. Charge your battery with the mains charger, its flat.
Click to expand...
Click to collapse
LiLJaY23 said:
I have the exact same problem too! It's so frustrating coz I just can't get my phone to stay on Odin mode without it restarting to that stupid error screen:crying:
Click to expand...
Click to collapse
ashyx said:
Simple. Charge your battery with the mains charger, its flat.
Click to expand...
Click to collapse
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help. And phone only goes to bootloop when its on charge or usb else doesnt turn on at all.
rexytm said:
Did you find a fix?
---------- Post added at 06:16 PM ---------- Previous post was at 05:39 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help.
---------- Post added at 06:51 PM ---------- Previous post was at 06:16 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help. And phone only goes to bootloop when its on charge or usb else doesnt turn on at all.
Click to expand...
Click to collapse
I got the same problem. I had to extract the battery and charged it with a external battery charger, because if I tried to connect the phone with the normal usbC cable, the continued with the boot loop y download mode.
did you find a solution sir?
Xyanide.Fuentes said:
Hello everyone,
I've tried to flash a rom using odin on my J610G and it failed. Now while trying to get into download mode the device restarts automatically. It's recognized by the computer but it won't stay on download mode. It won't boot into the OS since it prompts "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
I tried the smart switch but it won't stay on it, It keeps restarting. Any suggestion ?
Click to expand...
Click to collapse
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
I am having the same problem, is there a solution other than "Charge your Phone"?

Categories

Resources