So I noticed earlier today that the gapps were crashing on my moto 360... I couldn't use it. I did a reset of it and it repaired to my phone, which it was not pairing to earlier. Now... nothing is crashing but it's not pairing with my phone. Just says "Connecting..." Then says "Disconnected." Is my watch dead? I already reset it once and it's not working. Watch is very very hot and the battery is draining very quickly also. Dropped like 25% in ten minutes.
Everything on the watch is stock. No recovery or custom ROMs or anything.
I also have a Nexus 6 and man is my moto 360 been nothing but a headache this whole time. Im at the point where i simply hate the damn thing and would take $100 if someone wanted it. Android Wear has been nothing but a huge disappointment.
This issue stopped after I reinstalled the Wear app on my phone. Updated borked it.
Hey guys, so over the weekend, my watch suddenly said "Offline" when I try to send s text through Ok Google. I've restarted both my watch and phone, reset my watch, reinstalled all android wear apps on my phone, turned Google Cards on and off on my phone, and location as well. Nothing has worked and I tried Googling it but I still didn't get any results. The watch is connected to my T-Mobile GS6 Edge. Does anyone have any ideas? Thanks.
idksomuch said:
Hey guys, so over the weekend, my watch suddenly said "Offline" when I try to send s text through Ok Google. I've restarted both my watch and phone, reset my watch, reinstalled all android wear apps on my phone, turned Google Cards on and off on my phone, and location as well. Nothing has worked and I tried Googling it but I still didn't get any results. The watch is connected to my T-Mobile GS6 Edge. Does anyone have any ideas? Thanks.
Click to expand...
Click to collapse
I get the same thing occasionally, but usually a restart of the watch fixes it.
I can usually tell when it's going to happen cos the "OK Google" text re-appears on the watch face when it turns on.
idksomuch said:
Hey guys, so over the weekend, my watch suddenly said "Offline" when I try to send s text through Ok Google. I've restarted both my watch and phone, reset my watch, reinstalled all android wear apps on my phone, turned Google Cards on and off on my phone, and location as well. Nothing has worked and I tried Googling it but I still didn't get any results. The watch is connected to my T-Mobile GS6 Edge. Does anyone have any ideas? Thanks.
Click to expand...
Click to collapse
I have been seeing the same thing happen on mines which I purchased yesterday. Really annoying especially when it just hangs showing the little circle doing nothing.
It happens when you have no data connection on the phone. I use a data management app for battery life extension which turns off data or wifi when the screen is off and turns it on every 15 mins., my moto is disconnected tillI wake up the phone.
TLR - Make sure data is working on your phone.
Hi,
I've had this watch over a year now. Everything was working fine until probably last update or two. Now the watch just turns off randomly even when battery level is high. And sometimes it won't turn on unless its connected to the charging dock. I've tried deleted android wear, clearing cache, unpairing, factory resets, restarts. Nothing has worked, i've tried it close to 10 times now and just another factory reset this morning. Haven't been able to use the watch for like 2 months now. Its just a desk clock now. Please help.
Android Wear version - 1.3.0.2166028
Play Services = 7.8.99
Android OS = 5.1.1
is the watch actually shutting down like when you go into the screen and tell it to shut off or does it just go blank right away?
If the later then I hate to say it but it sounds like something inside the watch is broken. Perhaps a contact or solder point near or on the battery. Hard to say without sending it for service.
SirDigitalKnight said:
is the watch actually shutting down like when you go into the screen and tell it to shut off or does it just go blank right away?
If the later then I hate to say it but it sounds like something inside the watch is broken. Perhaps a contact or solder point near or on the battery. Hard to say without sending it for service.
Click to expand...
Click to collapse
It just goes blank. No notification at all. It's been on for 20 percent now. But I am sure it will turn off again. Maybe it's because it gets hot. I dunno.
bustanut666 said:
Hi,
I've had this watch over a year now. Everything was working fine until probably last update or two. Now the watch just turns off randomly even when battery level is high. And sometimes it won't turn on unless its connected to the charging dock. I've tried deleted android wear, clearing cache, unpairing, factory resets, restarts. Nothing has worked, i've tried it close to 10 times now and just another factory reset this morning. Haven't been able to use the watch for like 2 months now. Its just a desk clock now. Please help.
Android Wear version - 1.3.0.2166028
Play Services = 7.8.99
Android OS = 5.1.1
Click to expand...
Click to collapse
Did the watch suffer any kind of mechanical shock ?
Cst79 said:
Did the watch suffer any kind of mechanical shock ?
Click to expand...
Click to collapse
Not that I know of or anything very severe. I have pumped it on a wall before but that's it. Never dropped or anything. Just seemed like after the updates it when crazy. And I've tried almost every solution I've read on these forums.
So only turned off once yesterday which was good. This morning took it off dock and it didn't pair. Tried turning on/off bluetooth on phone no luck so I restarted watch. Then it says "android is starting". "App 1 of 12". Why does it do this sometimes? Does it alot. And it will not finish the process and boot up the watch unless it is docked. If wearing watch. It just shuts off.
bustanut666 said:
So only turned off once yesterday which was good. This morning took it off dock and it didn't pair. Tried turning on/off bluetooth on phone no luck so I restarted watch. Then it says "android is starting". "App 1 of 12". Why does it do this sometimes? Does it alot. And it will not finish the process and boot up the watch unless it is docked. If wearing watch. It just shuts off.
Click to expand...
Click to collapse
That sounds like it is trying to update or download the apps to the watch... which it sounds like you have 12 installed on your phone.
Have you tried deleting ALL the apps from you phone (only the 12 apps for the moto 360) and then uninstall Android wear and factory reset the moto 360 and then download Android wear to your phone and pair the 360 as a new watch and test it for a while and see how it works?
I have the same issue, watch shuts down while I am jogging and listening to Android Wear music from the watch throught Bluetooth. Watch shuts down around 75-80%. When I start it says: Loading Apps 1 out of 12... then shuts down (I assume its a safeguard mechanism for watch not to start without full battery to ensure all apps load completely).
When I wear the watch normally, it never goes off during the day, issue presents itself only when using Bluetooth headphones (perhaps the heating of BT transmitter forces the watch to malfunction and shut down)
ykazimir said:
I have the same issue, watch shuts down while I am jogging and listening to Android Wear music from the watch throught Bluetooth. Watch shuts down around 75-80%. When I start it says: Loading Apps 1 out of 12... then shuts down (I assume its a safeguard mechanism for watch not to start without full battery to ensure all apps load completely).
When I wear the watch normally, it never goes off during the day, issue presents itself only when using Bluetooth headphones (perhaps the heating of BT transmitter forces the watch to malfunction and shut down)
Click to expand...
Click to collapse
I never connect the bluetooth to listen to music. It just shuts down.
Maybe you are doing something that causes it to overheat. Do you leave it on for prolonged periods of time?
Been having this same issue. The Moto 360 powers off and when I press the power button to turn it back on I see the splash "M" image then it turns off. The only way to get it to stay on is to put it back on the dock and when it turns on it says shows the updating apps screen. Any fixes?
I haven't figured out fix. Because of this I barely use my watch anymore. Sucks.
Sent from my SM-G900V using Tapatalk
yep, haven't used my 360 in 6 months because of this problem. it's a shame really. my warranty went out like a week ago too :/
Same thing has been happening to me as well. Not doing anything on the watch, it just goes into sleep of death and I have to put it back on the charger. Battery level is usually above 60 or 70 %.
Same issue!!!
Guys even I had same issue, my watch will heat up suddenly and turns off. I've to put it in dock to turn it on again. This issue never occurred after stopped using some of the new watch faces which allows dim option. I'm currently using some of the old watch faces which are working fine. May be these new watch faces are not working fine with latest update. Now I don't face any problem and battery life is also great.
Try this solution and let me know.
Watch faces has nothing to do with it. My watch will not fully boot into android wear unless it's on the dock no matter which watch face I am using. Even the minimal face.
Sent from my SM-G900V using Tapatalk
Anybody able to find a fix? This is so annoying
I'm having the same problem. I purchased a used Moto 360 off eBay for $120 and it turns off randomly even when the battery is pretty high for example it just turned off randomly at 80%. Then when I try to turn it on it boots up till the M logo or sometimes to the colorful part but then turns off again. It also only turns back on by putting it on the charging dock. Also it shows the Installing App 1 of 1 at startup and then suddenly shuts down again. I am extremely annoyed and frustrated because of this as I spend $120 on this watch and now I get this which makes it unusable and a waste of money. Please tell me guys if any of you find a solution!
Unfortuanately, mine is doing the exact same thing. I thought I had it working again, but as soon as I tried to give GPS permission to Google Fit (wouldn't run without it), it spun there and just went black. I literally just took the watch off the charger, so it isn't that. Now, if I hold the power button or press it multiple times, it tries to boot up, and will stop before it even gets past the normal Android boot animation. Sometimes, it won't even get past the Motorola boot animation. Now, when I put it on the charger, it seems to load perfectly fine, and even gets past the 'Starting apps' phase. Again, once it loads back up, my watch shows +90% battery. I've tried a factory reset, unpair/repair, and still no go.
Found a pattern
My app does the same but i have at least a pattern when it happens. It seems like it is as soon as there has been an update either in Android ware app or in soem app that has an wear application.
Hello All! been having some difficulty with my Moto 360. Recently flashed a new CM13 nightly to my Verizon LG G3 and lost bluetooth pairings no big deal will just reset the watch. The watch no matter of battery level or if still docked on the charger will not unpair and factory reset. When off the charger it will make an attempt and turn off. On the charger it will attempt reboot and give me an error that android wear isn't responding i believe.
I have tried restoring bluetooth pairing through tibu on the phone in hopes of getting the watch back but it hasn't worked. The last thing i have not tried is going back to a older build and then trying to restore bluetooth pairings in hopes of getting the watch to be recognized.
I realize the bootloader is currently not unlockable on MM but is there a way to enter stock recovery and reset the watch or some other method i don't know of. I would like to avoid having to send the watch in for service.
My sw3 has worked for 6 months. I was having some connectivity issues with two of my apps so decided to do a factory reset and reconnect to force the apps to update. Done this at least twice successfully. But this time I go through the process...
-uninstall AW,
-reset my watch,
-reinstall AW,
-start the watch,
-open AW,
But the pairing code doesn't show on in AW...but it shows on the watch. I can connect in the phone bluetooth menu and get the "paired notification'' then the watch goes to the updating screen followed by 'syncing'. Usually this where I get the 'updating apps 3 of 23' but it just stays on syncing. At the end watch is not connected to my phone no apps are loaded. The phone is never visible in AW. Now if I go in and repair the devices it looks like they are connected but I can't.
I think something is wrong with AW.
update
I think its actually something in my phone... my wife's Samsung Note connects in AW. Why can't my Nexus 6 see the watch.
If you haven't done so already, try restarting the phone immediately after uninstalling Android Wear app on your phone. If that doesn't fix it, you may have to factory reset your phone.
working
tomtecs said:
If you haven't done so already, try restarting the phone immediately after uninstalling Android Wear app on your phone. If that doesn't fix it, you may have to factory reset your phone.
Click to expand...
Click to collapse
Thanks... I think its working... Add one more step to the process.
mrf51 said:
Thanks... I think its working... Add one more step to the process.
Click to expand...
Click to collapse
What have you do to work again? My phone have the same problem...
Thanks.
I have to this every couple months when my phone won't connect with my phone. Some sort of bluetooth issue.
- factory reset watch
- go into android wear and remove the watch
- forget the watch in bluetooth settings
- uninstall android wear
- restart the phone
- install android wear
- restart the phone
- use wear to connect to the phone
Sometimes I have to do this twice and it might take 45 mins to update my apps.
Perfect for me.
The only issue remaining is the unexpected unlinking with the phone, but it isn´t new.
Phone Bq Aquaris E6 4.4.2, watch Sony SWR50 6.0.1.