Need upgrade advice - Fire TV Themes and Apps

I was so excited when I learned that the Fire TV would play XBMC (now Kodi) that I bought two units. I followed a forum guide that I lost the link to, but the guide got me to root and mod the units, install the Xposed Framework, Google Framework and Play Store, TowelRoot, SU, etc and his modded XBMC 14.0-alpha2 apk so it was set for launcher intent, and ever since, I've been pretty happily using the boxes to just stream my mkv's from my Windows SMB shares (like the WDTV boxes did that I replaced with the AFTs) but now I can't upgrade my Kodi to the latest release, and I also can no longer run the Amazon App Store from XBMC, which means I can't the Fire TV optimized apps (Facebook, Youtube, etc). Can someone recommend a way out of this mess? I want to save my paths from xbmc, but other than that, I don't have a lot of personalization on either box to care about, so I could just factor reset and start from scratch.
My needs are:
1. Need to be able to run Kodi and update whenever available
2. Need to run the Amazon App Store
3. Need to change the boot to launch into Kodi
What's my best bet? I'm very confused about what the right direction would be.
Thanks,
Jesse

jessenj said:
I was so excited when I learned that the Fire TV would play XBMC (now Kodi) that I bought two units. I followed a forum guide that I lost the link to, but the guide got me to root and mod the units, install the Xposed Framework, Google Framework and Play Store, TowelRoot, SU, etc and his modded XBMC 14.0-alpha2 apk so it was set for launcher intent, and ever since, I've been pretty happily using the boxes to just stream my mkv's from my Windows SMB shares (like the WDTV boxes did that I replaced with the AFTs) but now I can't upgrade my Kodi to the latest release, and I also can no longer run the Amazon App Store from XBMC, which means I can't the Fire TV optimized apps (Facebook, Youtube, etc). Can someone recommend a way out of this mess? I want to save my paths from xbmc, but other than that, I don't have a lot of personalization on either box to care about, so I could just factor reset and start from scratch.
My needs are:
1. Need to be able to run Kodi and update whenever available
2. Need to run the Amazon App Store
3. Need to change the boot to launch into Kodi
What's my best bet? I'm very confused about what the right direction would be.
Thanks,
Jesse
Click to expand...
Click to collapse
So what's your question? You said you rooted the device & installed Kodi etc on it.. Not sure why you are asking what direction to go with?
Unless your first paragraph is some sort of typo..
Follow this here if you need to root the device..
Update to latest rootable FW.
http://www.aftvnews.com/how-to-setup-a-new-fire-tv-without-blocking-root/
Root
http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/
Block updates
http://www.aftvnews.com/how-to-block-ota-update-for-amazon-fire-tv-and-keep-root-access/
After that point, you can install the Google play store if you want, sideload Kodi apk onto the device. Use a custom launcher to load right into Kodi and bypass the default Amazon home screen. Once you do install Kodi and a launcher you can always go back to the default Amazon screen but just launching the KFTV launcher within Kodi.. So you never really lose access to it.
All that kind of info can be found here
http://wiki.xbmc.org/index.php?title=Amazon_Fire_TV

DHeffernan said:
So what's your question? You said you rooted the device & installed Kodi etc on it.. Not sure why you are asking what direction to go with?
Unless your first paragraph is some sort of typo..
Follow this here if you need to root the device..
Update to latest rootable FW.
http://www.aftvnews.com/how-to-setup-a-new-fire-tv-without-blocking-root/
Root
http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/
Block updates
http://www.aftvnews.com/how-to-block-ota-update-for-amazon-fire-tv-and-keep-root-access/
After that point, you can install the Google play store if you want, sideload Kodi apk onto the device. Use a custom launcher to load right into Kodi and bypass the default Amazon home screen. Once you do install Kodi and a launcher you can always go back to the default Amazon screen but just launching the KFTV launcher within Kodi.. So you never really lose access to it.
All that kind of info can be found here
http://wiki.xbmc.org/index.php?title=Amazon_Fire_TV
Click to expand...
Click to collapse
Sorry if I was unclear. My issue is kinda buried in my first post. When I wrote "modded XBMC 14.0-alpha2 apk so it was set for launcher intent", I"m not using a straight vanilla Kodi release, but a modded apk which appears to the unit as a launcher, and thus replaced the launcher on the unit so that it would boot straight into Kodi. What I need to do is upgrade the version of XBMC/Kodi to the latest. Should I scrub my boxes back to stock and use a different method to launch Kodi without the Amazon launcher? What is the preferred method of running Kodi as a launcher? Is there an alternative launcher replacement that I should be using instead?
Thanks and sorry for the ambiguity.
Jesse

jessenj said:
Sorry if I was unclear. My issue is kinda buried in my first post. When I wrote "modded XBMC 14.0-alpha2 apk so it was set for launcher intent", I"m not using a straight vanilla Kodi release, but a modded apk which appears to the unit as a launcher, and thus replaced the launcher on the unit so that it would boot straight into Kodi. What I need to do is upgrade the version of XBMC/Kodi to the latest. Should I scrub my boxes back to stock and use a different method to launch Kodi without the Amazon launcher? What is the preferred method of running Kodi as a launcher? Is there an alternative launcher replacement that I should be using instead?
Thanks and sorry for the ambiguity.
Jesse
Click to expand...
Click to collapse
Just upgrade the current version you got using the below instructions. After that, just do the launcher mod from the wiki page I linked up top. No need to wipe your box, might as well maintain some of your XBMC config/setup.
For the cleanest launcher.. use Xposed and rbox module (Requires root). Which is described in the wiki page I linked.
XBMC can be upgraded through ADB without losing your settings. To do this, you must use a newer version of the package already installed on the machine.
Download the package to your machine
Make sure ADB is connected to the Fire TV
Run adb install -r <apk-file-name>
Installation is complete when it reports the message "Success"
XBMC will still go through the "first run" screen the first time it is launched but your settings will remain intact.
Click to expand...
Click to collapse

DHeffernan said:
Just upgrade the current version you got using the below instructions. After that, just do the launcher mod from the wiki page I linked up top. No need to wipe your box, might as well maintain some of your XBMC config/setup.
For the cleanest launcher.. use Xposed and rbox module (Requires root). Which is described in the wiki page I linked.
Click to expand...
Click to collapse
Hey guy's im haveing trouple finding 14.0 apk and above can you please help...

So I side-loaded the 14.0a3 and restored KFTV Launcher. After that, I side loaded the FiredLauncher and rbox module and now it boots straight into the updated Kodi release without losing settings so I guess this is as good as its gonna get but I'm a little confused. It looks like the KFTV launcher is still launching first before the FiredLauncher, which means KFTV is still using a ton of memory before Kodi starts. Can I prevent that from happening and boot directly to Fired?

Related

SPMC on amazon home screen but says not compatible.

I finally managed to get spmc to show up on the home screen of my fire tv stick and it will open the app when i click the icon. But if I click information it still acts as if i did not purchase it and when I try to purchase it says this app is not compatible with my device. It also does not show up in the app menu so if it ever disappears from the main screen i have to go all the way to settings etc. Is this how it is supposed to behave and will it still get auto updates?
This depends on how you did this, there's a variety of options I've seen on getting SPMC on the homescreen, using llama or even the deregister/register method. But in either case, no sideloaded apps will not be auto updated, you will have to manually update them. infact SPMC released an update yesterday 13.4.0.
Amazon has yet to officially mark SPMC as compatible with FTV, and at this point it looks like they may not ever do it. So if you used the deregister/register trick, it showing incompatible is what I would expect to see as normal.
I just updated to the new version I was worried I would have to restore my whole xbmc backup but when I installed the latest apk it just overwrote the current one, cleared the cache and did the initial first time run thing. Then it loaded straight back to my setup. Out of curiosity I have just been installing the launcher version on all my devices ftv or stick, does it make a difference?
danknasty said:
I just updated to the new version I was worried I would have to restore my whole xbmc backup but when I installed the latest apk it just overwrote the current one, cleared the cache and did the initial first time run thing. Then it loaded straight back to my setup. Out of curiosity I have just been installing the launcher version on all my devices ftv or stick, does it make a difference?
Click to expand...
Click to collapse
The launcher version is made to function as the default launcher if you wanted that option. However it requires root and rbox's xposed module to make it work on fire TV. So you're just not see'ing any difference in it, if/when you gain root it will make a difference depending on how you want it set up.
Skater4599 said:
The launcher version is made to function as the default launcher if you wanted that option. However it requires root and rbox's xposed module to make it work on fire TV. So you're just not see'ing any difference in it, if/when you gain root it will make a difference depending on how you want it set up.
Click to expand...
Click to collapse
Yea I have it on all my rooted aftvs and just out it on my ftv sticks as we. Just making sure there's no disadvantage to having it on a non rooted device.

spmc setup

hi all,
im in the process of setting up my new aftv (UK no root)
im working my way through the guides to figure out how to sideload appss.
my questions are, which version of apk file do i download rom spmc website. launcher or non launcher? will launcher allow me to load from start even though im not rooted?
also, how do i get google play store onto aftv, would that allow me to download apps such as bt sport or are they all a no go for non rooted devices. just trying to figure out how much i can do with this nice little box
ratski said:
hi all,
im in the process of setting up my new aftv (UK no root)
im working my way through the guides to figure out how to sideload appss.
my questions are, which version of apk file do i download rom spmc website. launcher or non launcher? will launcher allow me to load from start even though im not rooted?
also, how do i get google play store onto aftv, would that allow me to download apps such as bt sport or are they all a no go for non rooted devices. just trying to figure out how much i can do with this nice little box
Click to expand...
Click to collapse
1 Non launcher is your only choice without root
2 no google play store without root
If the apps that you want to sideload from google play is a free app, then it can be done without root using APK Downloader. But that doesn't mean that they will actually work properly on the Ftv.
Thankyou thats exactky the info i was after.
Can i just ask what everyones uses to sideload apps. The original guide was a bit over tge top and then noticed aftv utility and adb fire.
I will also need sonething to move over zip files to allow install of navi x

new to aftv2

Hi,
I just opened the Fire TV 2 box. What am I supposed to do if I want root and kodi? Do I connect it to the internet? Do I need to be concerned about it upgrading? Should I upgrade firmware and then root? I know the original firmwares suck so I want to upgrade right?
sdxda said:
Hi,
I just opened the Fire TV 2 box. What am I supposed to do if I want root and kodi? Do I connect it to the internet? Do I need to be concerned about it upgrading? Should I upgrade firmware and then root? I know the original firmwares suck so I want to upgrade right?
Click to expand...
Click to collapse
5.0.4 is the newest rootable firmware, if you not running that yet you should wait for the new update or try & force a update in settings? then if you want to root if thats what you want to do i would advice you to read read & read some more before jumping feet first into something your not experianced with or dont know too much about yet. Their are a few types of root as of now - 1. quick root about 3-5 mins from rooted 5.0.3.1-5.0.4 (by Xenoglyph), 2. the best way in my opinion the 2hr root method (by Zeroepoch), 3, & a video guide based on Zeroepoch's method which is gonna be made (updated from the last firmware) by Ultimate Spy Binns hopefully next week at some point.
I personally will wait for Ultimate Spy Binns video tutorial because i rooted with him on the last firmware & his way was so clear & straight to the point, with no hicups ether
(I found this way the quickest & the best for me but there is many different ways to get kodi & firestarter on your Fire Tv 2 Box)
As for kodi the best way to install i think is download an app to your phone called Apps2Fire from the Play Store on a Android phone find the ip address of your Fire Tv (look in Settings), type the ip address into the app in setup, now download Firestarter from here via your phone - https://github.com/sphinx02/FireStarter/releases
, now on your phone open Apps2Fire & in the top right your see the download sign (the one with the arrow pointing up above the line), find the firestarter download select it & press install, when complete now open firestarter from manage devices secton in settings, and press left & find the section saying check for the latest version of Firestarter, if you need to update then update & then press open once finished, then do the same with Kodi (even though you dont have it installed it will find the latest stable version. So now you will have Kodi & Firestarter & if you want you can root now or wait for the video guide?
Hope this helps if so press that thanks button

[SOLVED] New HULU and HBO App Playback Failure Fix AFTV2 (sloane)

Update: This issue has now been confirmed solved for the Hulu, HBO Go, and HBO NOW app update error.
There are 2 ways to remedy the issue:
1. The prefered method is to update to the newest ROM. Rbox has issued an updated version of his ROM 5.2.4.2_r2. You can get a copy at the forum post here 5.2.4.1_r2. This updated version fixes playback errors in the new Hulu app as well as HBO (Go and Now) issues. Be sure to follow normal flashing instructions. Note - 5.2.4.2_r1 will NOT work for the new Hulu app (4.x.x).
2. If, for some reason, you do not want to flash an updated ROM. For the quick and dirty solution, post #12 gives instructions on correcting the problem. Note that this method only reverts to an older version of the app (3.x.x) and will not allow the new Hulu Live TV service functionality or the multiple accounts functionality. The same will need to be done for the HBO apk as well.
Original Post:
I'm surprised I'm the only one so far posting about this, but maybe I'm the only one experiencing problems.
The new HULU app updated automatically for me yesterday and immediately rendered playback impossible. Any show, movie, etc. comes back with a playback failure error code cdn-3-xxxxxxxx where the "x"s at the end change to different alpha numeric characters at any time. Here is what I have tried so far with NO POSITIVE RESULTS (in addition to speaking with HULU customer service support desk). I am on a rooted box using TWRP and rbox's system files (sloane).
Uninstalled and reinstalled app
Restarted AFTV
Unauthorized app via HULU website and re-authorized
Restarted router, cable modem, and AFTV (even a long term restart as requested by HULU tech support)
Updated AFTV software version (originally I was on 5.2.4.0 - then I updated to 5.2.4.2)
Wiped cache (Factory Reset)
As stated above, none of these worked.
HULU support gave me no way to uninstall the app and go back to an older (working) version, so I am currently stuck without a working version of HULU.
Here's what I'm interested in finding out from the community:
Has anyone experienced the same problems I have and then been able to get the app working correctly? If so, what method worked for you?
I can probably find an old version of the app online, however, I need to be able to block or turn off the update somehow... is there a method of turning the app update similar to how we stop the AFTV from updating automatically?
Any assistance would be appreciated. I'd really like the old version of the app back, since the newer version is crap.
This should be an old version of the apk you can try to sideload: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
Thanks Sizzle, but I fear without a method of stopping the update I will shortly be left in a similar situation as I currently am in. Would you happen to know how to stop the automatic update of the hulu apk?
chadster1976 said:
Thanks Sizzle, but I fear without a method of stopping the update I will shortly be left in a similar situation as I currently am in. Would you happen to know how to stop the automatic update of the hulu apk?
Click to expand...
Click to collapse
FireOS 5 UI in Settings/Applications/Appstore/ you can turn off the "Automatic Updates" for all apps. In the future you will get notifications about Updates. You will be able to ignore them or apply them.
Can you confirm that the apk I provided is the older version? I've already upgraded and everything works fine on my Fire TV 1.
Sizzle - I will have some time this afternoon or early evening to implement the rollback and turn off the updates that Y314K provided instructions to earlier. I will post back with results when complete.
Thank you again for the assist.
Yup... I posted this as an issue on aftv news. If your rooted the new Hulu version will not work on your Amazon Fire TV. Please let us know if this method fixes the problem.
Sent from my Nexus 6P using XDA-Developers Legacy app
tekno4ever said:
Yup... I posted this as an issue on aftv news. If your rooted the new Hulu version will not work on your Amazon Fire TV. Please let us know if this method fixes the problem.
Sent from my Nexus 6P using XDA-Developers Legacy app
Click to expand...
Click to collapse
The wife is not happy with Hulu not working and honestly she needs a stock always working AFTV box.
Happy Wife Happy Life! After searching a few different ways I'm unable to find a stock nonrooted 5.2.4.2 zip.
Might anyone know where I can download to flash via TWRP?
I can report same issue, it also effects newer versions of HBO GO
I've got a rooted fully unlocked bootloader FireTV 1 and am using version 4.0.0.342 as reported by Titanium Backup with no problems. What specifically shouldn't I be able to do? My hulu account is ad-free. Perhaps you guys are running an adblocker and do not have an ad-free hulu subscription?
Here's the 4.0.0.342 apk from my Fire TV: https://www.dropbox.com/s/mgvqg1ugzhrjpr5/com.hulu.plus-FireTV-4.0.0.342.apk?dl=0
Here's the old 3.2.a version from my other FireTV: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
I am looking into this. If it is what I think, it would only be effecting the Fire TV 2 and has nothing to do with root.
Sizzlechest said:
Can you confirm that the apk I provided is the older version? I've already upgraded and everything works fine on my Fire TV 1.
Click to expand...
Click to collapse
Ok - Here are my findings. I attempted to install the 4.0.xxx version on both of my AFTV2 (sloane) boxes. Neither box would play videos (although the app booted and appeared to run correctly initially). Both are rooted with one running 5.2.4.2 and the other running 5.2.1.1.
After unsuccessful attempts of trying out the v4 app on both boxes, I uninstalled the apk, then rebooted.
Installed 3.2.a and success! Both units work as they should.
Although they are not the newest version of the app, I am able to play back video - so that is a plus
This version will not have the new Hulu Live or the separate account access to the app.
For anyone else experiencing this problem, here is the process I would recommend to solve this:
1. Download earlier version (3.2.a) of Hulu app (see Sizzlechest's link posted earlier)
2. Uninstall current non-working Hulu app.
3. Make sure your app automatic updates are set to OFF by going to Settings>Applications>Appstore>Automatic Updates - OFF
4. Reboot Device (may not be necessary, but what does it hurt?)
5. Connect to device via adb
6. Install Hulu 3.2.a.apk via command "adb install com.hulu.plus-FireTV2-3.2.a.apk" - keep in mind this only works if you did not rename the apk from Sizzlechest when you downloaded it.
7. Profit
You will need to re-logon to the Hulu app.
Thanks for everyone's help on this one! A real community effort.
Looking forward to rbox's discoveries on this subject. Thanks for all of your hard work on this and all of the other projects you've been a part of.
Sizzlechest said:
I've got a rooted fully unlocked bootloader FireTV 1 and am using version 4.0.0.342 as reported by Titanium Backup with no problems. What specifically shouldn't I be able to do? My hulu account is ad-free. Perhaps you guys are running an adblocker and do not have an ad-free hulu subscription?
Here's the 4.0.0.342 apk from my Fire TV: https://www.dropbox.com/s/mgvqg1ugzhrjpr5/com.hulu.plus-FireTV-4.0.0.342.apk?dl=0
Here's the old 3.2.a version from my other FireTV: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
Click to expand...
Click to collapse
Sorry, forgot to address this Sizzle.
I DO have the add-free version of Hulu, but not the newer Hulu Live subscription. I am not running any adblocker software.
Okay. I have a theory on why both Hulu and HBO are not working. Like I said this is going to be a Fire TV 2 only thing. If someone is willing to try a fix, please PM me. Do note, this might brick the box. I really don't know. And if it bricks, it'll be super dead. But, there is a slim chance the unbrick program could revive it, so I would prefer someone who has a box that was rooted with my preloader instructions and not KingoRoot. But, if you don't care, and you didn't use the preloader instructions, and want to try anyway, there definitely won't be any way to recover it. I will say this again. If you try this fix, there is a chance it might brick the box. Just want to make that clear.
Is there a specific apk version (link) for hbo now that people have had success installing?
ducksoup18 said:
Is there a specific apk version (link) for hbo now that people have had success installing?
Click to expand...
Click to collapse
Sorry Duck, but I am not aware of the HBO Now app - I use Prime channels for my HBO subscription.
In the case of the Hulu app, I had to revert to the previous whole number version of app in order for it to work - V4.x.x.xxx --> V3.x.xxx
My suggestion is to just try some different versions in a fairly methodical way and see what works. It's fairly easy to install and uninstall via adb and only takes a few min.
Also, be sure to turn off automatic updating in the Appstore (different than updates for system), otherwise your app will just update itself again to the newer version and you'll be stuck.
Hopefully rbox will use his magical powers and get us an answer to all of our troubles soon. :fingers-crossed:
Thanks for the reply @chadster1976. Was able to get things to work by downloading an earlier version of HBO Now from the same place you guys suggested. Thanks again! Was able to watch GOT lastnight again on my main TV.
https://forum.xda-developers.com/showpost.php?p=73144047&postcount=412
rbox said:
Okay. I have a theory on why both Hulu and HBO are not working. Like I said this is going to be a Fire TV 2 only thing. If someone is willing to try a fix, please PM me. Do note, this might brick the box. I really don't know. And if it bricks, it'll be super dead. But, there is a slim chance the unbrick program could revive it, so I would prefer someone who has a box that was rooted with my preloader instructions and not KingoRoot. But, if you don't care, and you didn't use the preloader instructions, and want to try anyway, there definitely won't be any way to recover it. I will say this again. If you try this fix, there is a chance it might brick the box. Just want to make that clear.
Click to expand...
Click to collapse
I'm willing to test as I have spare AFTV devices just in case. Just sent you a PM @rbox
So I downloaded @rbox 5.2.4.2 deleted the SU directory inside the zip as instructed, then wiped everything possible 3x upon which I cleanly reinstalled 5.2.4.2 and Hulu still does not work on my non rooted AFTV 2 Box. Direct TV Now works perfectly without installing HideMyRoot so maybe this is truly just a Hulu issue on AFTV 2 Boxes. @AFTVnews.com
tekno4ever said:
So I downloaded @rbox 5.2.4.2 deleted the SU directory inside the zip as instructed, then wiped everything possible 3x upon which I cleanly reinstalled 5.2.4.2 and Hulu still does not work on my non rooted AFTV 2 Box. Direct TV Now works perfectly without installing HideMyRoot so maybe this is truly just a Hulu issue on AFTV 2 Boxes. @AFTVnews.com
Click to expand...
Click to collapse
Not sure Tekno. I was on chat 3 separate occasions with the Hulu tech support team and they claimed this had only been a rare occurrence... Take that however you want to... The extent of their assistance was resetting everything - including router, modem, etc. Then the final thing they suggested was a factory reset. I eventually did try that after updating to the latest firmware version from rbox. Needless to say that did not work. They couldn't help me with downgrading to the previous working version of the app, which is why I started this thread here on XDA.

Android App Stalker on FireTV

Hi All,
I have a requirement which I have not been able to figure out. I have the Firetv Generation 2 with the latest OS. I also have the NVidia Shield and the Infomir's Stalker App purchased there. When I move the Extracted APK to the firetv, it installs ok but then starts off and brings a popup that the license file of google play is missing.
Is there a way I can bring the license file the application is looking for on the firetv or
can I install google play and install it through that?
There is no Firetv version of the application. Any help is much appreciated.
navigates said:
Hi All,
I have a requirement which I have not been able to figure out. I have the Firetv Generation 2 with the latest OS. I also have the NVidia Shield and the Infomir's Stalker App purchased there. When I move the Extracted APK to the firetv, it installs ok but then starts off and brings a popup that the license file of google play is missing.
Is there a way I can bring the license file the application is looking for on the firetv or
can I install google play and install it through that?
There is no Firetv version of the application. Any help is much appreciated.
Click to expand...
Click to collapse
Would appreciate if anyone can help with this.
Post a link to the file and I'll see if I can strip the gplay from it.
Edit: never mind, I found the app and realized its a licence issue. Won't touch it here. Good luck.
JUSTINMARMER said:
Post a link to the file and I'll see if I can strip the gplay from it.
Edit: never mind, I found the app and realized its a licence issue. Won't touch it here. Good luck.
Click to expand...
Click to collapse
Alternatively, Is there a way to root the box and or install Google Play and get it through that? I saw a guide to install Android TV Fully but that I believe requires Root. The Last time I rooted my firetv years ago, I bricked it and I have two bricked firetv's in the closet. Except for this app, I don't have any need to root.
You can install google play services to get apps that require it to run, but you can't sign in to get past the licence check. Not without root.
https://forum.xda-developers.com/fire-tv/general/guide-installing-google-play-service-t3672181
The last rootable firmware for FTV 2 was 5.2.1.1.
JUSTINMARMER said:
You can install google play services to get apps that require it to run, but you can't sign in to get past the licence check. Not without root.
https://forum.xda-developers.com/fire-tv/general/guide-installing-google-play-service-t3672181
The last rootable firmware for FTV 2 was 5.2.1.1.
Click to expand...
Click to collapse
Thanks Justinmarmer.
JUSTINMARMER said:
You can install google play services to get apps that require it to run, but you can't sign in to get past the licence check. Not without root.
https://forum.xda-developers.com/fire-tv/general/guide-installing-google-play-service-t3672181
The last rootable firmware for FTV 2 was 5.2.1.1.
Click to expand...
Click to collapse
hi. I've just sent you a PM.

Categories

Resources