[Root][4.4.3 Update 2][LB/UB][Dual SIM] - Sony Xperia T2 Ultra

ok in the new update every thing wod be the same just use new kernal in place of 4.4.3 kernal from zip
Download new kernal here (From Second Update)http://d-h.st/mxn
if any one doesnt succeed plz do back up and after that do a clean install of new update
then after try this method
it will work
have fun !!!!​
thanks to @aliaz
Something that might help others.
Updated phone to new update.
Started rooting as per guide on page1.
After flashing 4.4.2, easy root failed to root the device.
Multiple attempts but no success.
Flashed 4.4.3 update and booted system. Realised I has Super User already installed. Uninstalled SU.
Flashed 4.4.2 again and this time easy root rooted the phone.
Flashed 4.4.3 and bingo! SU was installed, updated binaries and phone is now rooted.
Hi all
i have seen many posts where people are searching for root but not finding proper end.
i am a noob so i will try and make this as simple as possible.
first just relax and follow this simple steps its very very very easy
what you need
complete data back up
Flash tool download here : https://unrestrict.li/flashtool
if you face any issue over there then you can download it via torrent
link is http://kickass.to/usearch/flashtool-0.9.18.2-windows.exe/
Require files here http://d-h.st/iXN
easy root tool kit here http://forum.xda-developers.com/showthread.php?t=2784900
a cup of coffee
at least 50% battery charged phone
USB debugging mode enabled on 4.4.3 firmware as we will need it so do it first then go ahead
now follow this easy steps
1. install flash tool in C drive
2. extract downloaded rar in to C:\Flashtool\firmwares
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
5. now as soon as you get notification press vol -(down) key and connect phone and wait till flash completes
6. now disconnect your phone, close flash tool
7. turn on phone there wod be nothing will stuck at blank screen dont warry reonnect your phone to pc
8. now open easy root tool kit,and hit install.bat root your phone if stuck at any place close window again hit install.bat, disconnect phone when you see phone is rooted
9.now read this carefully
your phone is rooted but to flash 4.4.3 kernal back we beed to turn off the phone as we have to connect phone in flash mode to flash ftf 4.4.3
so to turn off phone in this condition(bank screen) follow this trick
press vol +(UP) and power together and wait
1st you will fell single vibret keep holding after some few sec you will fell three times vibration now release the keys as your phone is turned off.
10. now open flash tool now again hit flash button and this time select 4.4.3.ftf press ok and connect your phone when it says to connect by pressing vol - (down) key on phone.
11. as soon as its done disconnect your phone and turn it on
12. now install supersu and hit update binary
13. TADAAAA you have rooted phone
hope this helped you
if you face any challenge plz plz plz report back
thank you..

Dual Recovery
Almost forgot
after you root to have recovery go to this thread
http://forum.xda-developers.com/t2-ultra/development/t2-ultra-xzdualrecovery-qa-t2823793
a good news that touch bug has been gone in recovery
thanks sony for updating touch drivers
thank you

is my guide so much noob frankly that every one succeed
or its too bad that no one is understanding
64 views till now
no feedback
is every think ok out there ???

thanks for sharing this, it works as I did the most same way except making everything packed greatly as what you have done
the best of this was you made all files in one, extremely good for ones do not have 4.4.2 and 4.4.3 ftf files in hands
I guess most of guys do not want to try flash-power off-flash...

Maybe what you mean is only kernel,not the entire ftf file,right?

Chena_22 said:
Maybe what you mean is only kernel,not the entire ftf file,right?
Click to expand...
Click to collapse
what???

chauhanjayc said:
what???
Click to expand...
Click to collapse
At step 4 you only flash the 4.4.2 kernel, (deselect everything else) not the entire .ftf or you'll end up with 4.4.2 on your phone. Similarly, at step 10 you only need to flash the 4.4.3 kernel, not the entire image.
You forgot to mention that an unlocked bootloader is required to use flashtool.
developer.sonymobile.com/unlockbootloader
Also, if you unlock bootloader you lose warranty so backup TA partition before you proceed to keep warranty.

Well written guide. Success here. Rooted now.

Rajiv Patki said:
At step 4 you only flash the 4.4.2 kernel, (deselect everything else) not the entire .ftf or you'll end up with 4.4.2 on your phone. Similarly, at step 10 you only need to flash the 4.4.3 kernel, not the entire image.
You forgot to mention that an unlocked bootloader is required to use flashtool.
developer.sonymobile.com/unlockbootloader
Also, if you unlock bootloader you lose warranty so backup TA partition before you proceed to keep warranty.
Click to expand...
Click to collapse
HI RAJIV
failed to understand what you are trying to explain but i can say
i have made 4.4.2 and 4.4.3 kernal ftf so there is nothing to select or deselect
+
here i haven't explained abt unlocking bootloader so there is no need to worn abt DRM key
correct me if i am wrong in any line above
thank you

aliaz said:
Well written guide. Success here. Rooted now.
Click to expand...
Click to collapse
glad to here that
have fun

Hey
Thanx for f guide.
Will flash this tomorrow and report as i cant do it today coz of maths exam.
Sent from my D5322 using XDA Free mobile app

max.kaushik said:
Hey
Thanx for f guide.
Will flash this tomorrow and report as i cant do it today coz of maths exam.
Sent from my D5322 using XDA Free mobile app
Click to expand...
Click to collapse
best of luck for maths exams

chauhanjayc said:
HI RAJIV
here i haven't explained abt unlocking bootloader so there is no need to worn abt DRM key
Click to expand...
Click to collapse
Without unlocking your bootloader you cannot use flashtool, I suppose.

Rajiv Patki said:
Without unlocking your bootloader you cannot use flashtool, I suppose.
Click to expand...
Click to collapse
i have locked bootloader bro
i do love bravia engine and other sony stuffs :victory:
let me tell you one simple thing in one line
if you wona flash a custom kernal you need unlocked bootloader other then that you can do any thing with locked bootloader
like rooting
flashing custom rom
flashing mod
changing system partition
and a lot more

chauhanjayc said:
i have locked bootloader bro
i do love bravia engine and other sony stuffs :victory:
let me tell you one simple thing in one line
if you wona flash a custom kernal you need unlocked bootloader other then that you can do any thing with locked bootloader
like rooting
flashing custom rom
flashing mod
changing system partition
and a lot more
Click to expand...
Click to collapse
:laugh:

chauhanjayc said:
what???
Click to expand...
Click to collapse
At the 4 step,you say 4.4.2.ftf,so i suggest you to change it to 4.4.2 kernel..so,maybe there is no missunderstanding for noob users...

Hi Chauhanjayc
Thanks for your effort. I am new at flashtool, please help.
in your steps,
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
What I did:
1. I turned off the phone.
2. I held down vol- key and connect phone to PC using the USB cable.
3. Nothing happen.
What have I done wrong?
I have Sony PC Companion, Flashtool installed. Please kindly explain. Thanks.

jychow74 said:
Hi Chauhanjayc
Thanks for your effort. I am new at flashtool, please help.
in your steps,
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
What I did:
1. I turned off the phone.
2. I held down vol- key and connect phone to PC using the USB cable.
3. Nothing happen.
What have I done wrong?
I have Sony PC Companion, Flashtool installed. Please kindly explain. Thanks.
Click to expand...
Click to collapse
you need to manually install flash drivers
to do so open flash tool folder in C drive and there wod be a folder named drivers open and install our device drivers

chauhanjayc said:
Hi all
i have seen many posts where people are searching for root but not finding proper end.
i am a noob so i will try and make this as simple as possible.
first just relax and follow this simple steps its very very very easy
what you need
complete data back up
Flash tool download here : https://unrestrict.li/flashtool
Require files here http://d-h.st/iXN
easy root tool kit here http://forum.xda-developers.com/showthread.php?t=2784900
a cup of coffee
at least 50% battery charged phone
USB debugging mode enabled on 4.4.3 firmware as we will need it so do it first then go ahead
now follow this easy steps
1. install flash tool in C drive
2. extract downloaded rar in to C:\Flashtool\firmwares
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
5. now as soon as you get notification press vol -(down) key and connect phone and wait till flash completes
6. now disconnect your phone, close flash tool
7. turn on phone there wod be nothing will stuck at blank screen dont warry reonnect your phone to pc
8. now open easy root tool kit,and hit install.bat root your phone if stuck at any place close window again hit install.bat, disconnect phone when you see phone is rooted
9.now read this carefully
your phone is rooted but to flash 4.4.3 kernal back we beed to turn off the phone as we have to connect phone in flash mode to flash ftf 4.4.3
so to turn off phone in this condition(bank screen) follow this trick
press vol +(UP) and power together and wait
1st you will fell single vibret keep holding after some few sec you will fell three times vibration now release the keys as your phone is turned off.
10. now open flash tool now again hit flash button and this time select 4.4.3.ftf press ok and connect your phone when it says to connect by pressing vol - (down) key on phone.
11. as soon as its done disconnect your phone and turn it on
12. now install supersu and hit update binary
13. TADAAAA you have rooted phone
hope this helped you
if you face any challenge plz plz plz report back
thank you..
Click to expand...
Click to collapse
instalation of supersu failed to update binaries

Which phone u r using
T2 ultra
Or
T2 Ultra dual

Related

[Q] Xperia Arc won't boot after CWM crash

I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Been doing flashtool ftf recoveries whenever this occured. Do not power on arc s with it stuck. let flashtool self boot to flash mode and you will be back in buisness again.
Sent from my GT-P6800 using xda app-developers app
if you could tell me what to do a bit more precise I'd really love you! like a small guide
I assumed you have flashtool since you mention about kernel downgrade. if no get it installed
the step actually same as flashing the kernel with phone power off.
reference link to a online guide
http://www.thespicygadgematics.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Sent from my GT-P6800 using xda app-developers app
Sparfen said:
if you could tell me what to do a bit more precise I'd really love you! like a small guide
Click to expand...
Click to collapse
1. Flash ready to rood ics 562 with flashtool. Here's a youtube tutorial.
2. Root your phone
3. get cwm and follow these steps to install custom rom with locked bootloader
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install custom rom from sd card without rebooting
works every time for me
TRY THIS!
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
ok first since ur stuck flash back to stock using flash tools n then follow the procedure.. i had a similar problem n i fixed it.. it was a very simple prob.. for installing these custom roms u ve to format system/ , so if ur using the cwm app by pvyparts ul loose the cwm after wiping it.. all u ve to do is after flashing the custom rom ul ve to install CWM back (use cwm version 5 available in the thread by pvyparts.. not the latest one..)
here's the thread for CWM
n post back if it works..
Thanks guys, really appreciate it, will try these methods out.
Still won't work
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Sparfen said:
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Click to expand...
Click to collapse
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
jader13254 said:
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
Click to expand...
Click to collapse
Yeah, that I know and that's what I'm doing. When I hold down the back key and connect to the pc all that happens is that the green led lights up. Flashtool won't recognise it and it still says that I should hold down the back key and then connect to the PC...
http://forum.xda-developers.com/showthread.php?t=1126358
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=1126358
Click to expand...
Click to collapse
Thanks but flashtool won't recognise it and i have a locked bootloader.
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
This happened to me once, if i remember right, i've used the repair phone option in sus ( since my phone cannot be recognized i did the click your phone option) it did not repair my phone since sus said i have the latest version installed BUT then i pulled out my battery, reinsert it; open flashtoool, clicked flashmode and entered it successfully
Sparfen said:
Thanks but flashtool won't recognise it and i have a locked bootloader.
Click to expand...
Click to collapse
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
THANK YOU!
jman2131 said:
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
Click to expand...
Click to collapse
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Which rom u flashed??
Sparfen said:
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Click to expand...
Click to collapse
I was also stuck at Sony logo and it reboots every time just after sony logo. Then i used flashtool, flashed using "LT15i_4.1.B.0.587_Kernel.ftf".....
Now it boot further, but only to XPERIA logo, and then reboots....but certain times i have seen it getting past the logo, like it shows a display asking for pc companion, even the taskbar too with time and blutooth icon on it....but all of a sudden it reboots. i have tried rebooting more than a 100 times, while taking out battery everytime.
Also, I'm not able to get into recovery mode. I tried this using the combination of power on, and when sony logo appears, pressing and releasing volume down repeatedly. I hope i'm doing right.
So what should I do?? am not able to use this phone for a week...
Please help me out.
Ok got it working. I just unlocked the boot loader from sony bootloader site(sorry couldn't post the link, because of low post count)
So, it booted up but show error as soon as put a sim, that "Unfortunately keypad has stopped working".
I figured out the culprit, it is the build version with i flash it. I reflashed it with LT15i_4.1.B.0.431_kernel.ftf, now it working fine like a charm.
So much relief...!!
Hope this may help someone too...so i shared!!!

[Q] Bricked Xperia S??

Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
iamdumps said:
Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
Click to expand...
Click to collapse
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
HooLIMAN87 said:
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Ofcourse
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
iamdumps said:
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
Click to expand...
Click to collapse
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
patato800 said:
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
Click to expand...
Click to collapse
Yes I can connect to flashtool in flash mode. Sorry I'm a bit lost on where to go from here. All help greatly appreciated at this point.
If you can find a way to copy a ROM file into the fone we can flash it. The fone isnt being recognized by the PC , but the CWM works and it cannot mount as a USB Storage as some lunfile is missing . I am also on the same page and struggling for hours
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
It worked , Finally , thank you so much .
patato - thanks mate, will get on it and cry if I have any more questions. :laugh:
sarandeep - good work!!
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
iamdumps said:
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
Click to expand...
Click to collapse
Search youtube on how to unlock the bootloader and install CM10 there is one very good video but i can't give the link now as I'm on my phone
Glad I helped you ;D
Sent from my Jellybean Xperia S!
A tip for the newbies out here:
Read everything carefully. Chances of bricking a Sony device is quite low because of Sony's dev support but you will have moments of anxiety and lots of torn hairs. As a way to start, please go through all the top stickied posts in the Dev section and understand what are the many processes happening. It doesn't take more than a couple of hours to go through them but in the long run, helps you to enjoy your device better. Hope you will have a good time with the S

Root with New Kitkat Update!

The old root process will work with newer Kitkat Update on our Ultra Dual? Or somebody needs to create the new one for kitkat?
No it won't,wait for a new method or try to search from google...
Sent from my D5303 using XDA Premium 4 mobile app
Chena_22 said:
No it won't,wait for a new method or try to search from google...
Sent from my D5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You shoud use towelroot
Use one on my thread...
Sent from my D5303 using XDA Premium 4 mobile app
towelroot not
towelroot no working em xperia T2 dual
Towelroot works fine in T2 Ultra Dual.
First install SuperSU from Play Store
Enable USB Debbuging
And then follow towelroot steps.
And if you get stuck in a 'Clean' message on the prompt,just disable and enable USB Debbuging without disconnecting your phone.
It works for me. Try it for your own risks.
Sorry for bad english.
dropdan said:
Towelroot works fine in T2 Ultra Dual.
First install SuperSU from Play Store
Enable USB Debbuging
And then follow towelroot steps.
And if you get stuck in a 'Clean' message on the prompt,just disable and enable USB Debbuging without disconnecting your phone.
It works for me. Try it for your own risks.
Sorry for bad english.
Click to expand...
Click to collapse
Towelroot aint workin for the latest update 4.4.3.....Tho I had root for 4.4.2 acquired with easyroot toolkit.
---------- Post added at 07:54 PM ---------- Previous post was at 07:45 PM ----------
nil.d said:
The old root process will work with newer Kitkat Update on our Ultra Dual? Or somebody needs to create the new one for kitkat?
Click to expand...
Click to collapse
What version do u have?...If its 4.4.2 then u must try EasyRoot Toolkit. It works like charm.
The only method that worked was this:
In the 19.1.1.C.0.56
1. flash 4.4.2 stock kernel
2. root by Easyroot tool
3. flash 4.4.3 stock kernel
4. Install recovery
5. Flash Supersu on Recovery
Andrey Piekas said:
The only method that worked was this:
In the 19.1.1.C.0.56
1. flash 4.4.2 stock kernel
2. root by Easyroot tool
3. flash 4.4.3 stock kernel
4. Install recovery
5. Flash Supersu on Recovery
Click to expand...
Click to collapse
Can you please provide the links for those stock kernels?
Bukchoo said:
Can you please provide the links for those stock kernels?
Click to expand...
Click to collapse
If you have the ftf file,just flash it with flashtool but exclude everything except kernel...that will do
Bukchoo said:
Can you please provide the links for those stock kernels?
Click to expand...
Click to collapse
select all options except the kernel and uncheck data. After giving Flash the kernel 4.4.2, the screen will turn black, so this leaves the USB enabled before the deputation process. After restart, wait for 10 minutes and do the root.
hello, could you show me way to get recovery img for 19.1.1.C.0.56???
i want to root my t2 ultra dual 4.4.3
Andrey Piekas said:
The only method that worked was this:
In the 19.1.1.C.0.56
1. flash 4.4.2 stock kernel
2. root by Easyroot tool
3. flash 4.4.3 stock kernel
4. Install recovery
5. Flash Supersu on Recovery
Click to expand...
Click to collapse
Chena_22 said:
If you have the ftf file,just flash it with flashtool but exclude everything except kernel...that will do
Click to expand...
Click to collapse
Thanks....Rooted now
---------- Post added at 01:50 PM ---------- Previous post was at 01:42 PM ----------
saw tha moo said:
hello, could you show me way to get recovery img for 19.1.1.C.0.56???
i want to root my t2 ultra dual 4.4.3
Click to expand...
Click to collapse
i didnt do any recover thingy.......i just flashed 4.4.2 kernel>>>rooted>>>flashed back 4.4.3 kernel....its working like charm !!
hello, i disconnected phone from usb and reboot it, it is now in black screen, i am wonder that how long it take time??
thank you for your reply..
Bukchoo said:
Thanks....Rooted now
---------- Post added at 01:50 PM ---------- Previous post was at 01:42 PM ----------
i didnt do any recover thingy.......i just flashed 4.4.2 kernel>>>rooted>>>flashed back 4.4.3 kernel....its working like charm !!
Click to expand...
Click to collapse
saw tha moo said:
hello, i disconnected phone from usb and reboot it, it is now in black screen, i am wonder that how long it take time??
thank you for your reply..
Click to expand...
Click to collapse
Is the flashing process completed when you disconnect the phone?
yes, it's completed, but when i turn on the phone, it take time more than 20 minutes, it is not turn on so i flashed 4.4.3 but now i don't get root yet, how should i do....
Chena_22 said:
Is the flashing process completed when you disconnect the phone?
Click to expand...
Click to collapse
saw tha moo said:
yes, it's completed, but when i turn on the phone, it take time more than 20 minutes, it is not turn on so i flashed 4.4.3 but now i don't get root yet, how should i do....
Click to expand...
Click to collapse
In the first page,there is one tut how to get root
saw tha moo said:
hello, i disconnected phone from usb and reboot it, it is now in black screen, i am wonder that how long it take time??
thank you for your reply..
Click to expand...
Click to collapse
Yes...after flashing the 4.4.2 kernel...the screen will be black...so after switching the phone on.......wait for 5 minutes with the black screen...and then root it with the easyroot toolkit. and flash back the 4.4.3 kernel....after rooting is done switch the phone off..if ur having hard time switching off the phone cuz its black screen.....then do this >> prepare the kernel to flash......plug in the usb when ur phone is switched on.........now when flashtool prompts you to connect the phone.....switch off ur phone with pressing the volume up button and the power button.....when the phone reboots immediately press the volume down button and the kernel will be flashed... Kudos ur rooted with kitkat 4.4.3.
---------- Post added at 12:26 AM ---------- Previous post was at 12:21 AM ----------
Here is what to do in order to get your T2 Ultra Dual rooted:-
Assuming you are on stock KitKat 4.4.3 ROM. First thing you need to do is.. You need to enable USB debugging and Installation from Unknown Sources....Accept your computer on the phone screen if it prompts to do so...check these thinigs before u flash the 4.4.2 kernel cuz afer flashing it u will endup with a Black screen and wont be able to do the changes.
1) Flash the 4.4.2 kernel with Flashtool.
After flashing is done ...reboot your phone.....your phone will boot with a black screen on....you would be able to hear the boot up sound tho and the touch sounds as well when u press the volume rockers. Wait for the phone to boot properly with the black screen for about 5-10 minutes and then move for step 2.
2) Root your phone.
While its with a black screen but u have already enabled USB debugging and Installation from Unknown Sources ...You are good to go...Just plug the USB in and root your phone with Easyroot Toolkit....Move to step 3.
3) Finally Flash back the 4.4.3 Kernel.
Now this is the final step to get your monster rooted with 4.4.3. You need to flash back the 4.4.3 kernel so prepare ur Flashtool and wait untill it prompts you to connect the phone. The phone is with a black screen so there is no way you can normally shut it down with the soft keys. So this is what you are supposed to do. Connect the phone to the PC while its "Switched On" and press the "Volume Up" Button and the Power button together (Hard Reset) ...The phone will reboot...but here is the trick....You have to press the Volume Down Button before the phone vibrates and reboots. If the phone reboots..Flashtool will not detect it...So press the volume down button at the right time....right before it vibrates..If you can find another way to switch the phone off....that will be more easy....atleast i couldnt find a way lol.Once you successfully connect the phone to Flashtool it will flash back the new kernel and Voila!! You have Root with KitKat 4.4.3.
Show me your Love once You succed
thank you so much for your detail instructions, i will going to try again and back to you, i think i tried to root my phone while it was in black screen but it was not success anyway i will try it again..
Bukchoo said:
Yes...after flashing the 4.4.2 kernel...the screen will be black...so after switching the phone on.......wait for 5 minutes with the black screen...and then root it with the easyroot toolkit. and flash back the 4.4.3 kernel....after rooting is done switch the phone off..if ur having hard time switching off the phone cuz its black screen.....then do this >> prepare the kernel to flash......plug in the usb when ur phone is switched on.........now when flashtool prompts you to connect the phone.....switch off ur phone with pressing the volume up button and the power button.....when the phone reboots immediately press the volume down button and the kernel will be flashed... Kudos ur rooted with kitkat 4.4.3.
---------- Post added at 12:26 AM ---------- Previous post was at 12:21 AM ----------
Here is what to do in order to get your T2 Ultra Dual rooted:-
Assuming you are on stock KitKat 4.4.3 ROM. First thing you need to do is.. You need to enable USB debugging and Installation from Unknown Sources....Accept your computer on the phone screen if it prompts to do so...check these thinigs before u flash the 4.4.2 kernel cuz afer flashing it u will endup with a Black screen and wont be able to do the changes.
1) Flash the 4.4.2 kernel with Flashtool.
After flashing is done ...reboot your phone.....your phone will boot with a black screen on....you would be able to hear the boot up sound tho and the touch sounds as well when u press the volume rockers. Wait for the phone to boot properly with the black screen for about 5-10 minutes and then move for step 2.
2) Root your phone.
While its with a black screen but u have already enabled USB debugging and Installation from Unknown Sources ...You are good to go...Just plug the USB in and root your phone with Easyroot Toolkit....Move to step 3.
3) Finally Flash back the 4.4.3 Kernel.
Now this is the final step to get your monster rooted with 4.4.3. You need to flash back the 4.4.3 kernel so prepare ur Flashtool and wait untill it prompts you to connect the phone. The phone is with a black screen so there is no way you can normally shut it down with the soft keys. So this is what you are supposed to do. Connect the phone to the PC while its "Switched On" and press the "Volume Up" Button and the Power button together (Hard Reset) ...The phone will reboot...but here is the trick....You have to press the Volume Down Button before the phone vibrates and reboots. If the phone reboots..Flashtool will not detect it...So press the volume down button at the right time....right before it vibrates..If you can find another way to switch the phone off....that will be more easy....atleast i couldnt find a way lol.Once you successfully connect the phone to Flashtool it will flash back the new kernel and Voila!! You have Root with KitKat 4.4.3.
Show me your Love once You succed
Click to expand...
Click to collapse
Bukchoo said:
Yes...after flashing the 4.4.2 kernel...the screen will be black...so after switching the phone on.......wait for 5 minutes with the black screen...and then root it with the easyroot toolkit. and flash back the 4.4.3 kernel....after rooting is done switch the phone off..if ur having hard time switching off the phone cuz its black screen.....then do this >> prepare the kernel to flash......plug in the usb when ur phone is switched on.........now when flashtool prompts you to connect the phone.....switch off ur phone with pressing the volume up button and the power button.....when the phone reboots immediately press the volume down button and the kernel will be flashed... Kudos ur rooted with kitkat 4.4.3.
---------- Post added at 12:26 AM ---------- Previous post was at 12:21 AM ----------
Here is what to do in order to get your T2 Ultra Dual rooted:-
Assuming you are on stock KitKat 4.4.3 ROM. First thing you need to do is.. You need to enable USB debugging and Installation from Unknown Sources....Accept your computer on the phone screen if it prompts to do so...check these thinigs before u flash the 4.4.2 kernel cuz afer flashing it u will endup with a Black screen and wont be able to do the changes.
1) Flash the 4.4.2 kernel with Flashtool.
After flashing is done ...reboot your phone.....your phone will boot with a black screen on....you would be able to hear the boot up sound tho and the touch sounds as well when u press the volume rockers. Wait for the phone to boot properly with the black screen for about 5-10 minutes and then move for step 2.
2) Root your phone.
While its with a black screen but u have already enabled USB debugging and Installation from Unknown Sources ...You are good to go...Just plug the USB in and root your phone with Easyroot Toolkit....Move to step 3.
3) Finally Flash back the 4.4.3 Kernel.
Now this is the final step to get your monster rooted with 4.4.3. You need to flash back the 4.4.3 kernel so prepare ur Flashtool and wait untill it prompts you to connect the phone. The phone is with a black screen so there is no way you can normally shut it down with the soft keys. So this is what you are supposed to do. Connect the phone to the PC while its "Switched On" and press the "Volume Up" Button and the Power button together (Hard Reset) ...The phone will reboot...but here is the trick....You have to press the Volume Down Button before the phone vibrates and reboots. If the phone reboots..Flashtool will not detect it...So press the volume down button at the right time....right before it vibrates..If you can find another way to switch the phone off....that will be more easy....atleast i couldnt find a way lol.Once you successfully connect the phone to Flashtool it will flash back the new kernel and Voila!! You have Root with KitKat 4.4.3.
Show me your Love once You succed
Click to expand...
Click to collapse
Thanks for your explanation.
I'm still at rooted 4.4.2. Can you kindly share how I can install a rooted version 4.4.3? Thanks in advance

HELP Needed - Sony Xperia M Dual on BootLoop after Bootloaded Unlocked

hi guys, need some help here. I'll try to keep this short and precise to describe how i ended up in the problem
i did not have (and do not have) any custom recovery installed before this day, never needed to go in recovery mode.
1. Root using TowelRoot app (no problem so far)
2. Installed SuperSu app (no problem so far)
3. Unlocked bootloader using Fastboot and followed official sony guides
---after unlocking the bootloader, phone went in bootloop. It can go in Fastboot mode. It can go in FlashTool Mode, but when I tried flashing FTF file, it ended up in boot again. instead of Sony logo + colourful animation. now it's stuck at sony logo only.
I tried using Sony PCC, to repair it but it says there's any error, can't proceed - it's a dead end.
Do you think it's cause I actioned in incorrect order i.e. should have unlocked bootloader first before rooting?
Thanks for all the help/advices/direct links.
leavitnow said:
hi guys, need some help here. I'll try to keep this short and precise to describe how i ended up in the problem
i did not have (and do not have) any custom recovery installed before this day, never needed to go in recovery mode.
1. Root using TowelRoot app (no problem so far)
2. Installed SuperSu app (no problem so far)
3. Unlocked bootloader using Fastboot and followed official sony guides
---after unlocking the bootloader, phone went in bootloop. It can go in Fastboot mode. It can go in FlashTool Mode, but when I tried flashing FTF file, it ended up in boot again. instead of Sony logo + colourful animation. now it's stuck at sony logo only.
I tried using Sony PCC, to repair it but it says there's any error, can't proceed - it's a dead end.
Do you think it's cause I actioned in incorrect order i.e. should have unlocked bootloader first before rooting?
Thanks for all the help/advices/direct links.
Click to expand...
Click to collapse
Flash ftf file with flashtool. Just wait It must boot. First boot take more than 10 min
Thanks mate, i shall wait for it then. After the flashin waa completed, The flashtool asks to click on back button, i dont have it, any suggestion?
Thanks in advance
Sent from my Mi 4i using XDA Free mobile app
leavitnow said:
Thanks mate, i shall wait for it then. After the flashin waa completed, The flashtool asks to click on back button, i dont have it, any suggestion?
Thanks in advance
Sent from my Mi 4i using XDA Free mobile app
Click to expand...
Click to collapse
turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
Flashing Guide - http://forum.xda-developers.com/show....php?t=2697277
Don't forget to hit the thanks button
Sureshtuty said:
turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
Flashing Guide - http://forum.xda-developers.com/show....php?t=2697277
Don't forget to hit the thanks button
Click to expand...
Click to collapse
Sorry, I was away for few days, finally your trick help, it did take 20 minutes after ftf update. Thanks everyone else who helped here.
help me please
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
catmob said:
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
Click to expand...
Click to collapse
Flash stock rom(FTF File) with flashtool. No need to enable usb debugging. Just try it will work.
Flashing Guide - http://forum.xda-developers.com/showthread.php?t=2697277
Sureshtuty said:
Flash stock rom(FTF File) with flashtool. No need to enable usb debugging. Just try it will work.
Flashing Guide - http://forum.xda-developers.com/showthread.php?t=2697277
Click to expand...
Click to collapse
many many thanks sir....my problem is solved
catmob said:
many many thanks sir....my problem is solved
Click to expand...
Click to collapse
Don't say thanks Hit the Thanks Button

I NEED HELP! Urgent!!!

Hello! i am new in this forum and i dont know how this work but i have a problem and i need help! I made a flashboot in my sony xperia and now the phone is stuck in sony logo and i try to recovery by PC Comapanion and the software say that my phone no longer haver support because i made the bootloader thing....
I am desesperate and i dont know what to do now!, sorry for my ignorance i hope that this forum can help me!
Best Regards
asd_pp said:
Hello! i am new in this forum and i dont know how this work but i have a problem and i need help! I made a flashboot in my sony xperia and now the phone is stuck in sony logo and i try to recovery by PC Comapanion and the software say that my phone no longer haver support because i made the bootloader thing....
I am desesperate and i dont know what to do now!, sorry for my ignorance i hope that this forum can help me!
Best Regards
Click to expand...
Click to collapse
What model xperia do you have?
What did you do to your phone? Did you try and flash a boot.img or something.
Need more detail to help fix.
Maybe power off your phone. Hold down vol- as you plug USB cord and maybe PC companion will then see you phone
Or maybe
Download the phones firmware as a .ftf file
Flash firmware with flash tool.
meer_mortal said:
What model xperia do you have?
What did you do to your phone? Did you try and flash a boot.img or something.
Need more detail to help fix.
Maybe power off your phone. Hold down vol- as you plug USB cord and maybe PC companion will then see you phone
Or maybe
Download the phones firmware as a .ftf file
Flash firmware with flash tool.
Click to expand...
Click to collapse
I Have the Sony Xperia M (C1905)
I try to put the cyanogenmod android 5.1 and i was following a tuturial in youtube and i have made some mistake or i not did well the flashboot and for some way my phone its looping in sony logo, i unlok the bootloader and now the pc companion dont let me recovery the phone because have a unknow software installed....
exists some way do recovery the boot and the original software without pc companion?
I am very greatfull for the fast response and disponibility to solve this problem!
You said you unlocked the bootloader. Did you replace the boot.img? If so have you been able to get into recovery by holding VOL + while phone starts?
What video did you watch on YouTube and how far did you get?
Unlocked bootloader
Replacing boot.IMG (OK installed recovery)
Enter recovery and flashed ROM.
Have you tried turning your phone off. Open up PC companion. Then connect up your phone while holding VOL - down?
Read the following link it'll guide you through recovering your phone with flash tool.
http://xperiafirmware.com/8-firmware/40-sony-xperia-m-c1905
meer_mortal said:
You said you unlocked the bootloader. Did you replace the boot.img? If so have you been able to get into recovery by holding VOL + while phone starts?
What video did you watch on YouTube and how far did you get?
Unlocked bootloader
Replacing boot.IMG (OK installed recovery)
Enter recovery and flashed ROM.
Have you tried turning your phone off. Open up PC companion. Then connect up your phone while holding VOL - down?
Read the following link it'll guide you through recovering your phone with flash tool.
Click to expand...
Click to collapse
I unlook the bootloader and i put boot.img but when i switch on the phone he frozen in the sony logo its the far i can get, and when i switch the phone holding volume up dont do anything only the frozen sony logo,
and now another problem my computer and the pc companion dont recognize my phone when i connet the phone holding VOL - down, say that i connect a unknow device and the windows dont recognize
i try the step to install using the emma software but the software dont recognize the phon to holding de VOL-
i know is a litlle confunsing i am not a expert....i am very greatfull for your patience!
Here are some guides to help you recover your phone
https://youtu.be/i1-JTAbiU_s
http://www.androidgadgematic.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Good luck.
meer_mortal said:
Here are some guides to help you recover your phone
https://youtu.be/i1-JTAbiU_s
http://www.androidgadgematic.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Good luck.
Click to expand...
Click to collapse
It Works!!! thank you so much!!! can you give me a good tuturial do folow to update for the 5.1 lolipop?
Exists A ftf rom whit the 5.1 for sony xperia m?
Google forum XDA xperia m

Categories

Resources