Related
I tried a number of efforts but my Htc never unlocked.... i tired to shell adb but su was not found then i tried to install su on my device but it cant be helped then i tried to push su into my device's system but it failed and it gave a message "Failed to push read only..."
You may need to start at the beginning with your story.
You can't just push su binary and run it.
Do you even have the Tegra3 One X?
osamarehman said:
I tried a number of efforts but my Htc never unlocked.... i tired to shell adb but su was not found then i tried to install su on my device but it cant be helped then i tried to push su into my device's system but it failed and it gave a message "Failed to push read only..."
Click to expand...
Click to collapse
you have to unlock your device with http://htcdev.com/bootloader/
-you must register on the site
-on the right side of the site choose "all other devices" in ---select your device---
-press the big green button: "begin unlock bootloader"
-follow the instruction, i did it yesterday and it works!
ATTENTION: this procedure will wipe your device so you should do a back up.
hope i helped
glukosio said:
you have to unlock your device with http://htcdev.com/bootloader/
-you must register on the site
-on the right side of the site choose "all other devices" in ---select your device---
-press the big green button: "begin unlock bootloader"
-follow the instruction, i did it yesterday and it works!
ATTENTION: this procedure will wipe your device so you should do a back up.
hope i helped
Click to expand...
Click to collapse
+1
thanx to glukosio i have succesfully unlocked my htc but still i cant debug it with my pc,,, anything i do to write somthing to system it says read only permission denied....
Because you still need to root it
Sent from my HTC One X using Tapatalk 2
osamarehman said:
thanx to glukosio i have succesfully unlocked my htc but still i cant debug it with my pc,,, anything i do to write somthing to system it says read only permission denied....
Click to expand...
Click to collapse
you have to root your device:
-first you must install http://forum.xda-developers.com/showthread.php?t=1594819 this is clockworkmod recovery
-then you have to install http://forum.xda-developers.com/showthread.php?t=1538053 this is root
there is guides inside links, if you have some problem ask me
when i try to flash the included recovery.img with the fastboot command,,, it says unknown partition. error can not determine image filename.
osamarehman said:
when i try to flash the included recovery.img with the fastboot command,,, it says unknown partition. error can not determine image filename.
Click to expand...
Click to collapse
What firmware version do you have?
osamarehman said:
when i try to flash the included recovery.img with the fastboot command,,, it says unknown partition. error can not determine image filename.
Click to expand...
Click to collapse
what is the complete command you write?
"fastboot flash name-of-recovery-file.img"
android ver 4.0.3
HTC sense version 4.0
software number 1.29.401.11
HTC SDK API level 4.12
osamarehman said:
"fastboot flash name-of-recovery-file.img"
Click to expand...
Click to collapse
i think you must write
Code:
fastboot flash recovery name-of-recovery-file.img
but instead of "name-of-recovery-file.img" you must write the name of img file
Thanx i have successfully rooted my device.
Introduction:
This is a list of all known OTA's for the ASUS ZenWatch
The ASUS SmartWatch watch has it's ROMs built directly by google, instead of ASUS.
Click to expand...
Click to collapse
File List:
KNX01W → LWX48S
Click to expand...
Click to collapse
How to flash:
Requirements:
Stock recovery
Unmodified /system
Unlocked bootloader (Is this needed?)
Basic understanding of command line/shell (to unlock bootloader)
Unlock your bootloader
Download and set up adb and fastboot
Reboot into fastboot mode (How do you do this for this device?)
Open up a command prompt/shell where you saved fastboot
enter into command prompt/shell: "fastboot oem unlock"
Enter recovery mode via onscreen buttons
Enable recovery ui
(How do you do this for this device?)
Set up adb
Select apply update from adb
enter into command prompt: "adb sideload <path to saved update.zip>
Click to expand...
Click to collapse
FAQ:
How to find the ota?
If you're rooted, wait for the device to prompt you to update, then check /cache for the file
If you're not rooted, wait until the same time and do an adb logcat and look for a line with .zip in it
Why isn't the latest ota listed?
We can only list what we have, if the ota from Build X to Build Y isn't listed, we dont have the file for it yet.
How do you setup adb/fastboot
Please read the stickies in the general subforum, this is not a formal guide
Do I need to unlock the bootloader to flash the update zip?
Yes, if you wish to do it manually.
If you allow android to prompt for the update, you do not need to unlock
Can I flash this if I have a custom rom?
No, you must be on a stock AND unmodified rom
Can I flash this if I'm rooted?
Only if you have not modified any files
Click to expand...
Click to collapse
Credits:
hedsick: KNX01W → LWX48S
Click to expand...
Click to collapse
Changelog:
Dec 16, 2014: Added KNX01W → LWX48S
Nov 7, 2014: Initial page
Click to expand...
Click to collapse
2char
Sorry if this is the wrong place for this question, but will this process, once the files are available, allow for a complete manual reloading of the system software onto the watch? Mine had been baggy and freezing from the moment I got it, but I can't exchange it since Best Buy is sold out. (My thread here: http://forum.xda-developers.com/showthread.php?t=2945007
Must have gotten a dud. Any ideas?)
If this process will allow me to reload everything from scratch it may be with not returning it yet and waiting to see if this can be done soon.
Do people usually compile and release these files rather quickly after getting the watches or do we have to wait for Asus? Sorry for the newb questions...
Sent from my VS985 4G using Tapatalk
You would need a custom recovery and a full rom update.
If I had a unit I could make the latter, but I don't have one.
I have one, is there any way I can help get those URLS?
WACOMalt said:
I have one, is there any way I can help get those URLS?
Click to expand...
Click to collapse
If you get the notification for system update, plug it into your computer with debugging enabled and type the following:
adb logcat | grep zip
This will work for Mac/Linux, command may vary for Windows.
I was able to activate the ADB debugging and get into fastboot and recovery. Its pretty much the same process for most phones. fastboot oem unlock works too, and as usual, erases all data.
Go to Settings -> About -> Press Build Number 7 times -> Swipe right, Developer Options now shows under About.
Theres a few different options ding an Asus utility to check sensors and such.
To get into recovery or fastboot, you need to active ADB Debugging, unplug the watch than plug it back in, then run "adb reboot recovery" or "adb reboot fastboot"
To unlock bootloader, you need to push the reset button on the back to select.
In recovery, swipe right to left to show screen, up and down to select, and left to right to select.
Nice, I'm going to do this when I get home.
You might want to watch this androidpolice.com post for updates. Nothing for the Zenwatch yet but hopefully they'll post the OTA once it launches. http://www.androidpolice.com/2014/12/11/android-wear-lollipop-ota-roundup/
NOTE - Started a new thread regarding rooting, custom roms, and custom recovery research i have done, in the forum "Android Development", So i dont overtake this thread
I spent a lot of the weekend trying to root my Zenwatch (on 4.4.2w), or get a custom recovery working. Here's what I have tried and found out so far. They locked it down pretty damn well.
The kernel source and ROM source are not available anywhere.
There is no way that I can find to get root. I even went as far as loading towelroot onto the watch through adb install, but it just hangs and eventually closes.
There is no way I have found to build a custom recovery with CWM or TWRP.
There is no way I have found to dump the boot or recovery partitions.
There is no su binary preinstalled. Attempting to link a su binary has come up null.
dump_image binary is not installed, nor can you get it to install.
Trying to install any packages through stock recovery gives signature error.
Trying to use dd command to dump boot or recovery ends with "permission denied"
Trying to use "fastboot oem saveprt2sd recovery -n recovery.img -a" ends with "invalid page size". Same with trying to dump boot in this fashion.
Trying to boot either the LG G Watch or Samsung Gear Live unsecured boot images comes back with "(remote) dtb not found"
I believe that unless they release either the kernel source or the full ROM source, we are unable to root or modify any options.
Which really sucks, because the "OK Google" screen is REALLY F****** BRIGHT.
if anyone has success, please share
KNX01W > LWX48S:
http://android.clients.google.com/p...igned-anthias-LWX48S-from-KNX01W.aeef74d0.zip
hedsick said:
KNX01W > LWX48S:
http://android.clients.google.com/p...igned-anthias-LWX48S-from-KNX01W.aeef74d0.zip
Click to expand...
Click to collapse
How to update it?
Sent from my D6503 using XDA Free mobile app
paullu said:
How to update it?
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Enable ADB
adb reboot recovery
swipe down, then swipe left to select 'sideload from adb'.
Then:
adb sideload xxxx.zip
and it'll reboot when it's done.
hedsick said:
Enable ADB
adb reboot recovery
swipe down, then swipe left to select 'sideload from adb'.
Then:
adb sideload xxxx.zip
and it'll reboot when it's done.
Click to expand...
Click to collapse
How do I get it *onto* the watch?
Berzerker7 said:
How do I get it *onto* the watch?
Click to expand...
Click to collapse
the last line....
adb sideload ota.zip
hedsick said:
the last line....
adb sideload ota.zip
Click to expand...
Click to collapse
Sorry, I guess I meant, how do I connect it? Can't get it to recognize through the charging block.
EDIT: Nevermind, had to enable ADB debugging. Flashing now!
EDIT 2: Worked! Big thanks to hedsick for getting the OTA!
Just updated my watch with the link on android police, for those that don't know the update process it works like the g watch, enable usb debugging from dev options, make sure adb drivers are installed (universal adb .73 can be used) adb reboot recovery, then tap the watch face, swipe down to apply update from adb, swipe left, then on pc type adb sideload ota.zip
Op updated with LWX48S
I still dont have any info on the initial rom, or any rom after it.
If anyone could provide a dump of KNX01W, or LWX48S that'd be great (preferably the former)
TheManii said:
Op updated with LWX48S
I still dont have any info on the initial rom, or any rom after it.
If anyone could provide a dump of KNX01W, or LWX48S that'd be great (preferably the former)
Click to expand...
Click to collapse
Do you just want a system dump?
hedsick said:
Do you just want a system dump?
Click to expand...
Click to collapse
Everything I need (in order of importance):
dump of /system
bootloader version
partition table (there might be an unused baseband partition)
dump of bootloader
dump of baseband (if it exists)
Preferably for the initial rom, though as I have nothing even a dump LWX48S is acceptable until someone can provide the initial rom.
Adb pull of /system, everything else on the watch is read-protected
Https://mega.co.nz/#!JFYXXJJT!nJPMSR2e4jKXl3N1vYwlvckUyXOCjW_Y5PK4C4zcODI
version-bootloader: ANTHIAS1527
version-baseband: APQ_8026 - V1
fastboot getvar all
(bootloader) partition: system, ,size: 0x3e800000 ,type: ext4
(bootloader) partition: userdata, ,size: 0x773fbe00 ,type: ext4
(bootloader) partition: cache, ,size: 0x12c00000 ,type: ext4
(bootloader) partition: boot, ,size: 0x1000000 ,type: raw
(bootloader) partition: aboot, ,size: 0x500000 ,type: raw
(bootloader) partition: recovery, ,size: 0x1000000 ,type: raw
Can't get any partitions to dump through any method I know of
Hello Yu Yureka fans!!!
This for the Yu Yureka fans who want to root the phone but don't want to miss OTA update by flashing custom recovery
In this thread i will tell you how to ROOT your Yu Yureka without flashing custom recovery.
This method will not flash custom recovery over stock recovery, this will just boot the custom recovery once just to flash the superuser.zip. so you will be back to stock recovery after flashing superuser.zip.
So lets get started...
Your Bootloader should be UNLOCKED
Files you need:
1. adb and fastboot drivers
2. A CWM recovery link (don't worry we wont flash it, it is just needed to install superuser.zip)
3. Superuser.zip link (save this in your sd card or internal memory)
Note: Keep recovery.img file in the same folder where adb and Fastboot drivers are placed and always open command window from that folder.
Connect your phone to pc via data cable
Steps:
1. Open command window (cntl+shift+right click)
2. Type
Code:
adb devices
if your device is connected you will get it in connected devices
3. Type
Code:
adb reboot-bootloader
4. Type
Code:
fastboot -i 0x1ebf boot recovery-yu.img
now your device will boot into recovery mode
5. Select install zip from sd and navigate where you have downloaded the superuser.zip and select install.
6. Done!!! Your device is rooted and you are still in stock recovery :good: you wont miss the OTA
To check if you are in stock recovery just reboot into recovery :good:
Hit thanks if this helped :good:
This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...
N'ayam Amarsh'e said:
This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...
Click to expand...
Click to collapse
First i am not a user of yuplaygod forums,
Second its not copied
Third you have no right to point at someone without any valid reason
Lastly stop spamming my post (read xda forum rules first you visit it here --> http://forum.xda-developers.com/announcement.php?f=3861)
@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12
Titokhan said:
@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12
Click to expand...
Click to collapse
@Titokhan yeah dude thanks for reminding i will update the OP :good:
Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?
jitendragarg said:
Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?
Click to expand...
Click to collapse
Reinstall ADB Drivers
adbdriver.com
N'ayam Amarsh'e said:
Reinstall ADB Drivers
adbdriver.com
Click to expand...
Click to collapse
Thanks, will check. Although I downloaded the drivers just today, so not sure, how it is not up to date. Anyway, will check it once I am home in 3 hours.
tried resintalling the drivers. didn't help. command prompt still keeps on waiting for device forever, while phone is in fastboot mode.
Edit:
If I cancel the third command, and check the list again, phone is not listed. Somehow, after rebooting into bootloader, phone stops the adb connection.
i am on twrp recovery can i flash this recovery on that and update the new ota?
please help
Even without a custom recovery like TWRP you can get Magisk on your phone.
To do this you need to manually patch the stock boot image and flash that to your boot partition.
However, I've done all of this and with a few steps you'll be rooted.
There's a more detailed guide below.
1) Get bootloader unlock code here
2) Enable "OEM Unlocking", boot into fastboot and type: "fastboot oem unlock your-unlock-code"
3) Download patched ramdisk image here and put it in fastboot directory.
4) Reboot into fastboot and type: "fastboot flash ramdisk patched_ramdisk.img"
(Optional) 5) Flash this to go back to stock ramdisk
[Detailed Guide]
First off, you need an unlocked bootloader. To do this, you need a special code from Huawei, you can request this here:
https://emui.huawei.com/en/plugin.php?id=unlock
With this code, and having "OEM unlocking" enabled in debugger settings, boot in fastboot mode.
Afterwards, open fastboot console and type: "fastboot oem unlock your-unlock-code"
Your device will now reboot.
Now reboot your device back into fastboot mode and open a fastboot console once more.
Download this patched ramdisk partition and place it in the same folder as your fastboot executable.
http://www.mediafire.com/file/9yfz6w9e8q7j5u2/patched_ramdisk.img
Now simply type in the console: "fastboot flash ramdisk patched_ramdisk.img".
Reboot your phone and it is rooted!
Download Magisk Manager to update/configure Magisk.
[REMOVE ROOT]
To remove the root, simply flash this original ramdisk partition, the same way as above. You can also relock the bootloader if wanted.
http://www.mediafire.com/file/4d6w2labc6cmh2o/original_ramdisk.img
WORKS IN ANE-AL00 china model??
When I'm trying to install the patched ramdisk with "fastboot flash ramdisk patched_ramdisk.img" it says "cannot load patched_ramdisk.img".
What's the exactly directory?
@RogerXIII, from which build did you patched ramdisk?
Nick said:
WORKS IN ANE-AL00 china model??
Click to expand...
Click to collapse
Only tested on ANE-LX1, you're welcome to try it though.
r00terb3y said:
When I'm trying to install the patched ramdisk with "fastboot flash ramdisk patched_ramdisk.img" it says "cannot load patched_ramdisk.img".
What's the exactly directory?
Click to expand...
Click to collapse
It has to be in the directory of your fastboot executable.
kilroystyx said:
@RogerXIII, from which build did you patched ramdisk?
Click to expand...
Click to collapse
Version 8.0.0.104 (C185)
Just a clarification. So lite version come with 8.0 ? Not 8.1 ?
otonieru said:
Just a clarification. So lite version come with 8.0 ? Not 8.1 ?
Click to expand...
Click to collapse
Correct
RogerXIII said:
Only tested on ANE-LX1, you're welcome to try it though.
It has to be in the directory of your fastboot executable.
Version 8.0.0.104 (C185)
Click to expand...
Click to collapse
And how do I find out?
r00terb3y said:
And how do I find out?
Click to expand...
Click to collapse
Find out what ? The directory ? Or the compatibilty ?
If the conpatibility, simply try it. And you will know
r00terb3y said:
And how do I find out?
Click to expand...
Click to collapse
I think you mean the directory:
On your computer you have the file "fastboot" that you use for sending fastboot commands to your phone, put the .img file in yhe same folder as that program. If you don't know where it is located, you can download the platform-tools files separately and use those.
Thank you worked very well. I need twrp but i cant find or Build compatibility with p20 do you find any way to get it work?
1) Get bootloader unlock code here
this is giving me a 404 error...
In which compilation (build) did you use this root?
Just got root on ANE-LX1 successfully. Tell me please, should this metod pass SafetyNet or not?
Rooted my ANE-XL3 just fine.
Hi. Huawei P20 lite ANE-LX1 8.0.0.111(C432).
Asking for some advice. Having read several how to guide to root, installed adb on Linux, connected, backup ok, patched ram disk, original ram disk and so on and so on, Running in circles about UNLOCK CODE: OR getting a 404 eng/Chinese, Or logging at Huawei and getting a US page for honor 7/10. Cannot get the unlock page to fill the formulary, although having all necessary info, IMEI, Product ID etc. My region is PT. Request advice, considering returning the phone wich is not so bad at benchmarks... Thank you. Congrats
I payed 5 usd at dc-unlocker and unlocked my bootloader in about 20 minutes. I followed this guide:
https://forum.xda-developers.com/honor-7/general/bl-unlock-dc-unlocker-t3318738
Just got an OTA: ANE-LX1 8.0.0.105(C10). My device OS ver.: ANE-LX1 8.0.0.102(C10). Please tell me, should I apply it? What will happen with root? Will I need to reflash ramdisk after update?
Can someone tell me where to unlock the bootloader? The link gives me only a 404 page
Alucard1238 said:
Can someone tell me where to unlock the bootloader? The link gives me only a 404 page
Click to expand...
Click to collapse
If the link is down you have a paid service, google by DC-unlocker
Guide updated!!!!!
If you wanna get back to stock ROM and relock bootloader + get OTAs working again, this is the right place!
DISCLAIMER: Relocking bootloader erases all your data/internal storage and (off course) remove TWRP/modules/root, so do a backup of all your data first. Also, I'm not responsible for any bricked devices (phones, SD Cards, etc). I tested it in my XT1955-1 and it worked fine, but we all know that errors might occur.
Finally, let's go to the steps.
Step 1 - Downloading necessary files
Download Android Platform Tools here and then extract it.
Install Motorola Drivers on your PC (download here).
Download the lastest firmware according to your variant/software channel here and extract it in the same folder you had extracted Android Platform Tools.
Download the "Lock Script" here, according to your android version and PC's OS.
For example: if your PC uses Windows as OS, and your phone is in android 10, download the "Lock-10q_windows.bat" file.
Or if you have a Linux distro on your PC and android 9 on your phone, download "Lock-9pie_linux.sh" file.
Place the file inside the platform-tools folder, where the ROM was extracted too.
Step 2 - Preparing your phone
Remove all your google account in device's settings and then go to Developer Options. Enable Android debugging and OEM unlocking (if you can't enable OEM unlocking, you may need to root your device first to get it avaible again (see Rooting thread)).
Power off your phone and put it fastboot mode. Connect it on PC using USB cable.
Step 3 - Installing Stock ROM and re-locking bootloader
Just double click on the Lock.bat/.sh file and it will reflash stock ROM and lock bootloader. Now all you have to do is wait till it finishes. This should take a few minutes to be done.
The phone will boot automatically after the last command is executed.
It seems to be a little hard, but it's easy. If you have any questions, let me know, I'll try to answer ASAP.
Very nice, it's really working! Thanks!
Works on xt1955-4 thanks very much, will the warranty still apply?
piotr1859 said:
Works on xt1955-4 thanks very much, will the warranty still apply?
Click to expand...
Click to collapse
run
Code:
fastboot getvar all
Will tell you if warranty is voided.
Sent from my ali using XDA Labs
piotr1859 said:
Works on xt1955-4 thanks very much, will the warranty still apply?
Click to expand...
Click to collapse
Yes, should work fine. Afaik, once you unlock your bootloader, your warranty is avoid, theoretically. But I guess you can send it to service center (if it's needed) with no problems. They don't always check if you have unlocked your bootloader or not.
Warning: Due to some changes in bootloader and people getting hard bricks in February security patch, i don't recommend to relock bootloader in that version, do it in December security patch instead!
Hello guys. I have Motorola Moto G7 Power (XT1955-4). I've tried to put in twrp and a rom, but when I rebooted my device it don't power on anymore. So I've searched many guides to repair. I've used "blankflash" and after many times I was finally power on my device and go in Fastboot Mode. But now there's another problem. When I connect with usb and open CMD and type "adb devices" appear:
LIST OF DEVICES ATTACHED
or
WAITING FOR DEVICES
I tried many things to fix it but nothing work. Now I've uninstalled everything on my pc, drivers too.
Maybe I've installed bad "blankflash"???
How can I fix my troubles?
DarkAngelNoctis said:
Hello guys. I have Motorola Moto G7 Power (XT1955-4). I've tried to put in twrp and a rom, but when I rebooted my device it don't power on anymore. So I've searched many guides to repair. I've used "blankflash" and after many times I was finally power on my device and go in Fastboot Mode. But now there's another problem. When I connect with usb and open CMD and type "adb devices" appear:
LIST OF DEVICES ATTACHED
or
WAITING FOR DEVICES
I tried many things to fix it but nothing work. Now I've uninstalled everything on my pc, drivers too.
Maybe I've installed bad "blankflash"???
How can I fix my troubles?
Click to expand...
Click to collapse
If the device is in fastboot mode only fastboot commands will work
Code:
fastboot getvar all
edit:grammer
Sent from my ali using XDA Labs
sd_shadow said:
If the device is in fastboot mode only fastboot commands work like
Click to expand...
Click to collapse
Ok. Thanks!
LuisLFSS said:
Warning: Due to some changes in bootloader and people getting hard bricks in February security patch, i don't recommend to relock bootloader in that version, do it in December security patch instead!
Click to expand...
Click to collapse
hey would it be safe to use this method on security patch version April1,2020? if not please point me in the right direction.
thanks
darko454 said:
hey would it be safe to use this method on security patch version April1,2020? if not please point me in the right direction.
thanks
Click to expand...
Click to collapse
Yes, it's safe. Now we have blankflash so it's safe
LuisLFSS said:
Yes, it's safe. Now we have blankflash so it's safe
Click to expand...
Click to collapse
ok thanks!
LuisLFSS said:
Yes, it's safe. Now we have blankflash so it's safe
Click to expand...
Click to collapse
Hi, can you send a link to blankflash for XT1955-1?
THANK YOU.
hawkdown77 said:
Hi, can you send a link to blankflash for XT1955-1?
THANK YOU.
Click to expand...
Click to collapse
Yes, join in my group: t.me/motog7brasil
LuisF201707 said:
If you wanna get back to stock ROM and relock bootloader + get OTAs working again, this is the right place!
DISCLAIMER: Relocking bootloader erases all your data/internal storage and (off course) remove TWRP/modules/root, so do a backup of all your data first. Also, I'm not responsible for any bricked devices (phones, SD Cards, etc). I tested it in my XT1955-1 and it worked fine, but we all know that errors might occur.
Finally, let's go to the steps.
Step 1 - Downloading necessary files
Download Android Platform Tools here and then extract it.
Install Motorola Drivers on your PC (download here).
Download the lastest firmware according to your variant/software channel here and extract it in the same folder you had extracted Android Platform Tools.
Step 2 - Preparing your phone
Remove all your google account in device's settings and then go to Developer Options. Enable Android debugging and OEM unlocking (if you can't enable OEM unlocking, you may need to root your device first to get it avaible again (see Rooting thread)).
Power off your phone and put it fastboot mode. Connect it on PC using USB cable.
Step 3 - Installing Stock ROM
If you're already in stock ROM with no modules and stuff installed on it, just skip this and jump to the next step. If you're not, then stay here.
Open CMD (command prompt) in the same folder you had extracted firmware and android platform tools.
Shift+right click and then "Open command window here" or just type CMD in the folder path bar at the top in windows explorer. Run this commands all at once in CMD:
Once it is done, DON'T power on your phone, just leave it as it is and let's go to the last step.
Step 4 - Relocking Bootoader
In cmd, run this commands all at once
Done! The phone will boot automatically after the last command is executed.
It seems to be a little hard, but it's easy. If you have any questions, let me know, I'll try to answer ASAP.
Click to expand...
Click to collapse
There is an bat file out to relsash stock rom with out trying all that stuff in manually
Help
I followed all the steps and managed to block the bootloader but when I turn on the phone I get "start up failed" can someone help me.
I did it in the April 1 patch
JPalomo1997 said:
I followed all the steps and managed to block the bootloader but when I turn on the phone I get "start up failed" can someone help me.
I did it in the April 1 patch
Click to expand...
Click to collapse
Which android version? There's april security patch for android 9 and 10...
roadkill42 said:
There is an bat file out to relsash stock rom with out trying all that stuff in manually
Click to expand...
Click to collapse
I know... I'll update the thread soon
chrisbchrisb85 said:
For step 4 relocking the bootloader what does "run these commands all at once" mean??? As soon as I lock the bootloader I can no longer flash anything else, therefore still stuck with a boot screen warning
Click to expand...
Click to collapse
"run these commands all at once" = copy all the commands and execute them in cmd...
And which android version did you install? because the commands to flash android 10 are different than android 9 ones
Guide updated!!!!!
I removed those annoying commands and put a link to download Scripts that already do everything automatically. Now the guide is simpler and easier