Related
Hello. I just bought a note 2 that was locked to videotron. (sgh-t889v) I managed to unlock it, and got it working on fido. But as i suspected, all i get is hspa+. I would like some help on how to get LTE to work. I'm assuming I need to flash a rogers modem since rogers and fido share the same lte network. I just can't for the life of me, find any info anywhere. Can anyone help?
STOP.
There are some things that are still being worked out here.
It is possible you won't be able to go back to the T889V modem after flashing any other modem, and IMEI corruption is a likely occurance.
In the meantime, could you make a proper NV items and IMEI backup following these two threads?
[TOOL/GUIDE] Full NV Backup and Restore [SIMPLE] [08-03-2012]
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305
From the text file backup made with the NV_reader_writer tool, could you remove item 550 (that's your IMEI, which I have no business in knowing), and forward the remainder to me or post it here? Thanks in advance.
I've managed to get LTE working on my T889V with the I317M modem, but it wasn't without some trouble and I get bootloops if I try to revert to the T889V modem.
Another poster here is stuck on the T889 modem, and until I sent him a T-Mobile T889 NV backup his phone was only capable of 2G GSM, rendering it unusable with his Wind Mobile SIM card.
Goodbye,
Darkshado
Darkshado said:
STOP.
There are some things that are still being worked out here.
It is possible you won't be able to go back to the T889V modem after flashing any other modem, and IMEI corruption is a likely occurance.
In the meantime, could you make a proper NV items and IMEI backup following these two threads?
[TOOL/GUIDE] Full NV Backup and Restore [SIMPLE] [08-03-2012]
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305
From the text file backup made with the NV_reader_writer tool, could you remove item 550 (that's your IMEI, which I have no business in knowing), and forward the remainder to me or post it here? Thanks in advance.
I've managed to get LTE working on my T889V with the I317M modem, but it wasn't without some trouble and I get bootloops if I try to revert to the T889V modem.
Another poster here is stuck on the T889 modem, and until I sent him a T-Mobile T889 NV backup his phone was only capable of 2G GSM, rendering it unusable with his Wind Mobile SIM card.
Goodbye,
Darkshado
Click to expand...
Click to collapse
Thanks for the heads up. I'll see what I can do in regards to your request. But it will have to be tomorrow
Wait did that person fix the problem with only getting 2g using the NV backup? I'm stuck on 2g also. If this helped please send me the NV backup as well.
I'm stuck using the t889 modem. As all other modems give me a unknown baseband and unknown imei. Along with a bootloop.
Darkshado said:
STOP.
There are some things that are still being worked out here.
It is possible you won't be able to go back to the T889V modem after flashing any other modem, and IMEI corruption is a likely occurance.
In the meantime, could you make a proper NV items and IMEI backup following these two threads?
[TOOL/GUIDE] Full NV Backup and Restore [SIMPLE] [08-03-2012]
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305
From the text file backup made with the NV_reader_writer tool, could you remove item 550 (that's your IMEI, which I have no business in knowing), and forward the remainder to me or post it here? Thanks in advance.
I've managed to get LTE working on my T889V with the I317M modem, but it wasn't without some trouble and I get bootloops if I try to revert to the T889V modem.
Another poster here is stuck on the T889 modem, and until I sent him a T-Mobile T889 NV backup his phone was only capable of 2G GSM, rendering it unusable with his Wind Mobile SIM card.
Goodbye,
Darkshado
Click to expand...
Click to collapse
here is the full NV backup you requested. sorry about the delay! hope I did everything right lol, first time doing that.
Looks all good to me. Now to do some more research and testing...
I put my IMEI back in the file, wrote it all, rebooted. No problems, HSPA and LTE still functional.
Rebooted to download mode and reflashed the T889V modem *still* bootloops, weird.
I'll make a nandroid and try with clean user data.
Merci beaucoup!
Darkshado said:
Looks all good to me. Now to do some more research and testing...
I put my IMEI back in the file, wrote it all, rebooted. No problems, HSPA and LTE still functional.
Rebooted to download mode and reflashed the T889V modem *still* bootloops, weird.
I'll make a nandroid and try with clean user data.
Merci beaucoup!
Click to expand...
Click to collapse
How did you flash a I317 radio on a t889 in the first place anyway? I don't quote understand, but did you delete your imei to make it work?
Sent from my SGH-T889 using xda app-developers app
I modified another Note 2 modem recovery zip (I think it was for the T889, or maybe the T889V) to put in the I317M modem instead.
Flashing that corrupted my IMEI.
Hello dspkeff, it's nice to see your post here, and let me breakdown what I have done to make the T889V work on the Fido 4G network by flashing the i317M modem and I'd like to ask you about the how to connect the phone to read/write the NV items.
First of all, my phone now is bricked because the IMEI number is gone (shows 0), but yes, I did get it working, not with the stock ROM, with the Jedi X 7.2 instead.
The time when I noticed my mobile data was gone was after flashing another custom kernel. I don't know if it has anything to do with the kernel or just because of flashing the modem. I did get 4G access and I tested the speed and the H+ icon was changed to 4G instead. And then I decided to try out the custom kernel, and then the data was gone after reboot.
So a lot of videos suggested that flashing the stock ROM will fix everything, but not in our cases here, because the T889V will stuck in bootloop when flashing the stock ROM... and that not only me, there are some other people on the forum who are experiencing the exact same problem.
Now we are stuck here, I've been thinking a lot, the only way I can get the IMEI back is to do the IMEI injection by using the NV reader/writer program such as QPST, or NV-items reader/writer, but I couldn't get them to even connect to my phone. That is actually the reason I'm PMing you because I saw that you provided the NV backup of the T889V! If you can read the phone, I think there is a way to write to it, and then I can preform an IMEI injection, maybe it can unbrick my phone!
Could you kindly tell me how you backup the NV-items please please? I really don't wanna lose 700 bugs lol, thanks soooo much!
ashwill said:
Hello dspkeff, it's nice to see your post here, and let me breakdown what I have done to make the T889V work on the Fido 4G network by flashing the i317M modem and I'd like to ask you about the how to connect the phone to read/write the NV items.
First of all, my phone now is bricked because the IMEI number is gone (shows 0), but yes, I did get it working, not with the stock ROM, with the Jedi X 7.2 instead.
The time when I noticed my mobile data was gone was after flashing another custom kernel. I don't know if it has anything to do with the kernel or just because of flashing the modem. I did get 4G access and I tested the speed and the H+ icon was changed to 4G instead. And then I decided to try out the custom kernel, and then the data was gone after reboot.
So a lot of videos suggested that flashing the stock ROM will fix everything, but not in our cases here, because the T889V will stuck in bootloop when flashing the stock ROM... and that not only me, there are some other people on the forum who are experiencing the exact same problem.
Now we are stuck here, I've been thinking a lot, the only way I can get the IMEI back is to do the IMEI injection by using the NV reader/writer program such as QPST, or NV-items reader/writer, but I couldn't get them to even connect to my phone. That is actually the reason I'm PMing you because I saw that you provided the NV backup of the T889V! If you can read the phone, I think there is a way to write to it, and then I can preform an IMEI injection, maybe it can unbrick my phone!
Could you kindly tell me how you backup the NV-items please please? I really don't wanna lose 700 bugs lol, thanks soooo much!
Click to expand...
Click to collapse
I used the method described in the second post of this thread. I can't help you out anymore than that since I know next to nothing about the subject. I'd love to help more than that but I really don't know how lol
Darkshado said:
I modified another Note 2 modem recovery zip (I think it was for the T889, or maybe the T889V) to put in the I317M modem instead.
Flashing that corrupted my IMEI.
Click to expand...
Click to collapse
Which part of the modem did you modify? Would you mind posting your modified modem?
I noticed that my T889 isn't accepting Rogers and AT&T modems -- Whenever I flash them, my baseband in settings would say "Unknown".
I modified the updater zip, the modem file is straight from the stock Odin file.
Sent from my SGH-T889V using xda app-developers app
ashwill said:
Hello dspkeff, it's nice to see your post here, and let me breakdown what I have done to make the T889V work on the Fido 4G network by flashing the i317M modem and I'd like to ask you about the how to connect the phone to read/write the NV items.
First of all, my phone now is bricked because the IMEI number is gone (shows 0), but yes, I did get it working, not with the stock ROM, with the Jedi X 7.2 instead.
The time when I noticed my mobile data was gone was after flashing another custom kernel. I don't know if it has anything to do with the kernel or just because of flashing the modem. I did get 4G access and I tested the speed and the H+ icon was changed to 4G instead. And then I decided to try out the custom kernel, and then the data was gone after reboot.
So a lot of videos suggested that flashing the stock ROM will fix everything, but not in our cases here, because the T889V will stuck in bootloop when flashing the stock ROM... and that not only me, there are some other people on the forum who are experiencing the exact same problem.
Now we are stuck here, I've been thinking a lot, the only way I can get the IMEI back is to do the IMEI injection by using the NV reader/writer program such as QPST, or NV-items reader/writer, but I couldn't get them to even connect to my phone. That is actually the reason I'm PMing you because I saw that you provided the NV backup of the T889V! If you can read the phone, I think there is a way to write to it, and then I can preform an IMEI injection, maybe it can unbrick my phone!
Could you kindly tell me how you backup the NV-items please please? I really don't wanna lose 700 bugs lol, thanks soooo much!
Click to expand...
Click to collapse
I cannot get them to connect to my phone either and have the same issue. I can boot by using CWM to mount and then fixing permissions but no baseband, SIM card recognition or IMEI.
it was bootlooping for me and IMEI corruption from flashing a t889 ROM on a t889v (which worked before a number of times). I made sure the flashcounter said zero and warrantied it with Samsung. Even Samsung couldn't fix it and gave me a brand new one.
Can only get it to 1 not zero.
could you provide the i317m modem you have used
Darkshado said:
I modified another Note 2 modem recovery zip (I think it was for the T889, or maybe the T889V) to put in the I317M modem instead.
Flashing that corrupted my IMEI.
Click to expand...
Click to collapse
could you provide the i317m modem with instruction you have used to get lte working on the t889v.
Thanks
Last week, I did the most stupid thing on my note 2 (SGH-t889). I saw a rom that i liked for the n7100 and flashed on my 889v. Of course, rom works fine but no DATA OR VOICE :crying:crying:
So I flashed my phone with my previous rom and I had data again. All of a sudden, after installing all my apps, I lost the connection. My phone went completely crazy
i saw unknown baseband on settings / phone status; phone rebooted itself. I tried to flash a stock rom, or even flash the 889v modem on any rom and no luck; i was on a constant boot loop
I had to flash another modem from T-Mobile to get out of boot looping (MODEM: T889UVALL4_Modem-Jan_16_13-teshxx) but i couldn't get on any network even if I my phone could detect them (I'm on Videotron).
I've searched xda and other sitEs for solution on how to fix an almost empty esf folder. On a tmo modem my emei was 0 0 and on videotron modem it was null.
SOLUTION
My efs folder was almost empty; no nv_data.bin and those other files.
I went across this site
http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-enable-t-mobile-3g4g-aws-bands-on-att-galaxy-note-2-sgh-i317/
It's a tutorial on how to enable aws on the AT&T note 2. It had just what i needed: a qcn file. Ive follwed the directions on the site; flashed the qcn file with the QPST software and rebooted the phone. My emei was a bunch of 0. No signal still but the battle wasn't loss.
On this thread
http://forum.xda-developers.com/showthread.php?t=1804117
I've used the EMEI NVitem generator to create en encrypted file of my EMEI
Put it on the the NV reader / writer, reboted the phone
And VOILA!!!!!!!!!!!!!
i got my signal back but with a tmo modem (MODEM: T889UVALL4_Modem-Jan_16_13-teshxx)
my 4g is back and my gps is working flawwless
Now, just to let you know, I'm not a developer and i take no credit for this. Even if this thread get approved or deleted, I just wanted to help other members like me who are stuck on the same situation (especially 889v owners). At the end.... MY PHONE IS BACK !!!!!!!!!!!!!!!!!!!!!!!
ohhhh! i allmost forgot....
I AM NOT RESPONSIBLE FOR YOUR PHONE
demension21 said:
Last week, I did the most stupid thing on my note 2 (SGH-t889). I saw a rom that i liked for the n7100 and flashed on my 889v. Of course, rom works fine but no DATA OR VOICE :crying:crying:
So I flashed my phone with my previous rom and I had data again. All of a sudden, after installing all my apps, I lost the connection. My phone went completely crazy
i saw unknown baseband on settings / phone status; phone rebooted itself. I tried to flash a stock rom, or even flash the 889v modem on any rom and no luck; i was on a constant boot loop
I had to flash another modem from T-Mobile to get out of boot looping (MODEM: T889UVALL4_Modem-Jan_16_13-teshxx) but i couldn't get on any network even if I my phone could detect them (I'm on Videotron).
I've searched xda and other sitEs for solution on how to fix an almost empty esf folder. On a tmo modem my emei was 0 0 and on videotron modem it was null.
SOLUTION
My esf folder was almost empty; no nv_data.bin and those other files.
I went across this site
http://galaxynote2root.com/galaxy-n...3g4g-aws-bands-on-att-galaxy-note-2-sgh-i317/
It's a tutorial on how to enable aws on the AT&T note 2. It had just what i needed: a qcn file. Ive follwed the directions on the site; flashed the qcn file with the QPST software and rebooted the phone. My emei was a bunch of 0. No signal still but the battle wasn't loss.
On this thread
http://forum.xda-developers.com/showthread.php?t=1804117
I've used the EMEI NVitem generator to create en encrypted file of my EMEI
Put it on the the NV reader / writer, reboted the phone
And VOILA!!!!!!!!!!!!!
i got my signal back but with a tmo modem (MODEM: T889UVALL4_Modem-Jan_16_13-teshxx)
my 4g is back and my gps is working flawwless
Now, just to let you know, I'm not a developer and i take no credit for this. Even if this thread get approved or deleted, I just wanted to help other members like me who are stuck on the same situation (especially 889v owners). At the end.... MY PHONE IS BACK !!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
MIKE BROWN FTW!!!!!!
Sent from my SGH-T889 using XDA Premium HD app
I can not download Download ATT_I317_AWSMOD_dumimei.qcn. I just get a blank screen in Chrome, IE and Safari. Can you post it or send me a dropbox link or something. Thanks
edit:
Never mind, never saw that kind of Captchaw before. I thought it was just an ad.
I keep getting a size difference error when I go to write the my imei
Did you generate a txt file with the emei generator?
Sent from my SGH-T889 using xda premium
demension21 said:
Did you generate a txt file with the emei generator?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Problem was I used serveral tools to try to fix this and they did not not requirer the check digit at the end of the imei. The CDWS imei converter requires it. I'm back up and running !!!
gedster314 said:
Problem was I used serveral tools to try to fix this and they did not not requirer the check digit at the end of the imei. The CDWS imei converter requires it. I'm back up and running !!!
Click to expand...
Click to collapse
so you got data back...if so on what baseband?
demension21 said:
Did you generate a txt file with the emei generator?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Id really love to talk about your process, as I have used QPST(UPST), CDMA Workshop, etc through varios Android, Blackberry, Palm, etc devices and am trying to confirm (repair steps) for posting... please PM me so I can test
Sent from my SGH-T889 using xda app-developers app
I say (repair steps), I mean restoring from backup... have all the various backups and until my GNII and N4 are picked up im not fixing what isnt broke
Sent from my SGH-T889 using xda app-developers app
demension21 said:
so you got data back...if so on what baseband?
Click to expand...
Click to collapse
Here you go.
Wow. I followed your steps to the letter and it worked, thank you so much!!
Have you flashed back to a VTR modem or would that mess everything up? Thanks again for your help.
From past experience flashing the videotron modem would bring me back to boot loop, wouldnt lose imei or signal but would start then after 30secs reboot.. Im stuck with tmo modem. Works fine but signal seems a little weaker.
i have canadian note2 t889v that i got from craigs the other day. everything seemed fine, didnt have sim to try for mobilicity that im on (aws band), he said he used it with rogers fine
I put the sim card, went to search networks but my provider was not listed there. So I rooted the phone , loaded twrp, flashed prerooted factory rom for t889v ( from mrrobins) , no network, than i flashed original factory rom, still no luck, than i flashed t889v modem and still the same.
My imei is present, and matches one on back of the phone. My efs folder is there and is populated (dont know if anything is missing from there)
I dont have backup of efs or imei. What are the chances it is corrupted ? Does anyone have any suggestion, and should i try this method to try to fix it ?
You may have to put your apn settings manually for your carrier. I would try that to start.
Sent from my ASUS Transformer Pad TF700T using xda premium
Already tryed
Sent from my HTC DESIRE HD using xda app-developers app
Also my emei number is correct in abaut.
What are the files I need to have in efs how can I know if my efs is corrupt ?
Sent from my SGH-T889V using xda app-developers app
Have you check the *#2263# menu to make sure it is on the correct band, also in network setting you can switch to gsm, wcdma, so on. As for imei as far as I know if it were corrupt your imei would be bad. Is it possible the phone has been blacklisted?
That code dont work in stock dialer. And mobilicity dont block imei #
Sent from my SGH-T889V using xda app-developers app
pearse said:
Wow. I followed your steps to the letter and it worked, thank you so much!!
Have you flashed back to a VTR modem or would that mess everything up? Thanks again for your help.
Click to expand...
Click to collapse
yes I've tried flashing the 889v modem and I was back in a bootloop again
man i wiish that I could have an original 889v nv data files; i could find a way to midify the emei and flash it on my phone
knnrsk said:
i have canadian note2 t889v that i got from craigs the other day. everything seemed fine, didnt have sim to try for mobilicity that im on (aws band), he said he used it with rogers fine
I put the sim card, went to search networks but my provider was not listed there. So I rooted the phone , loaded twrp, flashed prerooted factory rom for t889v ( from mrrobins) , no network, than i flashed original factory rom, still no luck, than i flashed t889v modem and still the same.
My imei is present, and matches one on back of the phone. My efs folder is there and is populated (dont know if anything is missing from there)
I dont have backup of efs or imei. What are the chances it is corrupted ? Does anyone have any suggestion, and should i try this method to try to fix it ?
Click to expand...
Click to collapse
you mentioned that the phone was working on rogers before you had it?
did you try any othe sim card... form rogers or mobile city?
try frash custom rom and 889v modem with it?
if that doesnt work try the method in the op
Background: (beginner level 1) I bought an i317 Note 2 online to use in Canada. Came with 4.1.2 so I did the downgrade to 4.1.1...ALJ2 modem and all to use the free unlock method. I followed the method to the letter and I thought it worked.
Problem: it just doesn't register on the network, it just displays a circle with a line through it where the network bars are supposed to be. I've spent hours, honestly, just searching through several threads and have tried almost all methods I came across to put it to stock and somehow get it to work. I've put in my Rogers sim card and even my friend's sim but same result.
So after months of quietly browsing through XDA and finding the solutions, I am forced to call the seasoned pro's to help me. Again, I've flashed the stock 4.1.1 ROM to put it back to stock and even flashed the modem for it separately and still no luck. The only other thing I suspect could be an EFS issue but I don't know if that is the case, or have the know-how to check and resolve if required. Please help.... http://forum.xda-developers.com/images/icons/icon9.gif
Thanks,
Allen.
First check your imei by doing *#06# could be corrupted imei.
Sent from my SGH-I317M
And cheak ur apn
Yes, I checked and made sure that the IMEI matches to both the box and the sticker on the back. Also the APN appears for Rogers when I have the sim inserted and I am able to select it as well.
Having imei showing is a good sign
Use rom from here MA3 for Rogers you can also find correct odin from that thread.
http://forum.xda-developers.com/showthread.php?t=2004650
And flash modem from this post they have latest ma3 modem for Rogers too.
http://forum.xda-developers.com/showthread.php?t=2016575
Sent from my SGH-I317M
Thanks - pardon my ignorance but my Note 2 is from AT&T hence me putting the AT&T firmware and modem. Are you consciously suggesting me to put the Rogers Firmware and modem overwriting the AT&T stuff? If not, anything else I can try?
allen81 said:
Thanks - pardon my ignorance but my Note 2 is from AT&T hence me putting the AT&T firmware and modem. Are you consciously suggesting me to put the Rogers Firmware and modem overwriting the AT&T stuff? If not, anything else I can try?
Click to expand...
Click to collapse
My bad sorry.. didnt see that you bought l317 model. Don't flash the rom above cuz it will automatically flash Rogers modem too. Did you try resetting apn settings to default with your new sim?
Sent from my SGH-I317M
jon3sh said:
My bad sorry.. didnt see that you bought l317 model. Don't flash the rom above cuz it will automatically flash Rogers modem too. Did you try resetting apn settings to default with your new sim?
Sent from my SGH-I317M
Click to expand...
Click to collapse
Yes - the APN automatically detects from the sim card but to be on the safe side I even created a new entry for Rogers. But I'm not getting any connectivity - no voice or data.
Calling all pro's - please help. I have even tried the method mentioned by this OP and still no luck.
http://forum.xda-developers.com/showthread.php?t=2145967
NOW the problem is that its just stuck in Airplane Mode - a little Googlin' leads me to believe that it could be a corrupt EFS issue but I'm not savy enough to check and fix myself.
Guys please help.
Thanks.
Check this thread.
http://forum.xda-developers.com/showthread.php?t=2068041
Sent from my SAMSUNG-SGH-I317
Efs issue. You should of backed up you're efs folder....
Sent from my Nexus 7 using xda app-developers app
allen81 said:
Calling all pro's - please help. I have even tried the method mentioned by this OP and still no luck.
http://forum.xda-developers.com/showthread.php?t=2145967
NOW the problem is that its just stuck in Airplane Mode - a little Googlin' leads me to believe that it could be a corrupt EFS issue but I'm not savy enough to check and fix myself.
Guys please help.
Thanks.
Click to expand...
Click to collapse
Hopefuly its not efs problem cuz I know if you have efs issue you will get that yellow box with hardware info showing once you turn on the phone. You also mention that imei is still good and showing when you enter *#06# its more on enabling data connection with Rogers network.
Sent from my SAMSUNG-SGH-I317
jon3sh said:
Hopefuly its not efs problem cuz I know if you have efs issue you will get that yellow box with hardware info showing once you turn on the phone. You also mention that imei is still good and showing when you enter *#06# its more on enabling data connection with Rogers network.
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
Yes, the IMEI shows properly and matches to the sticker on the back. Also the baseband (modem) info also shows up correctly. It just remains in Airplane Mode and everytime I attempt to disable it, the phone pretends to be "processing" but the Airplane Mode option greys out - and the airplane mode remains active. I've spent all weekend on this and still no luck - guys I need help to bring my phone back to life. Earlier today I reflashed the 4.1.1 ALJ2 stock file through ODIN and still no change.
Also can someone point/guide me on how to restore the defaults on Service Mode/Menu - I bought it second hand and not sure if the previous owner made any changes trying to unlock the phone. I just want to revert everything back to stock to end with a working phone. Will flashing a stock ROM fix/revert any changes?
(I'm talking about the Service menu that is access using the *#197328640# used to unlock the phone)
Thanks.
Guys - I reflashed the original QCN (not sure if its proper or corrupted) that I got with the phone which has returned the phone to out of airplane mode but now I'm not catching any signal. I backed it up before proceeding to try with a dumbimei qcn with the aws mode thinking that might fix my problem. I'm really dumbfounded and need help. It's been 4 days now and I'm still without a phone...
allen81 said:
Guys - I reflashed the original QCN (not sure if its proper or corrupted) that I got with the phone which has returned the phone to out of airplane mode but now I'm not catching any signal. I backed it up before proceeding to try with a dumbimei qcn with the aws mode thinking that might fix my problem. I'm really dumbfounded and need help. It's been 4 days now and I'm still without a phone...
Click to expand...
Click to collapse
So left the phone on overnight - woke up today and saw 1 bar and the phone registered on Rogers Network - so the problem now is low signal. I carried the phone around with me covering a variety of areas, especially those where signal should have been high, it still did not go above 2 bars... Please help.
allen81 said:
So left the phone on overnight - woke up today and saw 1 bar and the phone registered on Rogers Network - so the problem now is low signal. I carried the phone around with me covering a variety of areas, especially those where signal should have been high, it still did not go above 2 bars... Please help.
Click to expand...
Click to collapse
Glad u fixed it and get it going. What modem are you on right now maybe updating modem will boost your signal.
Sent from my N2
I'm having a similar issue with just seeing the Circle with a line through it and after going to *#06# all that appears is "null/null" Any ideas to help me out please?
EDIT: solved it by wiping system and then flashing a ROM
Need help with lost unlocked
Hi, I've been trying to read as much as I can to solve my issue but no luck... I'm about to give up but thought someone here might be able to help hopefully!
Here's what happened, I bought an sgh-i317 running on 4.1.1 from someone online the phone worked properly at the time. I purchased an unlocked code from internet put it in everything worked fine. I later found the way to unlocked for free with the *#197.... but I said what the heck its already done... kept on reading got excited and decided to flash 4.1.2 rooted with odin... after that my nightmare began...
First I inserted an ATT sim and got the mm#2 sim not provisioned, then I tried a friends ATT it worked but when he putted back to his iphone he got his phone block so he had to call ATT to make it work again
Whenever I insert a T-Mobile sim or simple mobile I get the phone not allow mm#6
At first I thought the phone has been reported but I called ATT and they say it isn't, then I kept reading and nothing seems to repair this
I even reflashed everything to stock 4.1.1 to try to unlocked it with the *#197... again but it seems to do nothing now
then I found this http://forum.xda-developers.com/showthread.php?t=2045563
where they say that once you are unlocked you shouldn't flash with odin... I guess I messed up...
My imei matches, the phone has not been reported, whenever I insert a foreign sim car I don't get the network lock screen but the phone not allow mm#6 message
I think that somehow when I updated to 4.1.2 with odin... I either lost or damage my unlock
could someone help?
Thanks in advance
regules6 said:
Hi, I've been trying to read as much as I can to solve my issue but no luck... I'm about to give up but thought someone here might be able to help hopefully!
Here's what happened, I bought an sgh-i317 running on 4.1.1 from someone online the phone worked properly at the time. I purchased an unlocked code from internet put it in everything worked fine. I later found the way to unlocked for free with the *#197.... but I said what the heck its already done... kept on reading got excited and decided to flash 4.1.2 rooted with odin... after that my nightmare began...
First I inserted an ATT sim and got the mm#2 sim not provisioned, then I tried a friends ATT it worked but when he putted back to his iphone he got his phone block so he had to call ATT to make it work again
Whenever I insert a T-Mobile sim or simple mobile I get the phone not allow mm#6
At first I thought the phone has been reported but I called ATT and they say it isn't, then I kept reading and nothing seems to repair this
I even reflashed everything to stock 4.1.1 to try to unlocked it with the *#197... again but it seems to do nothing now
then I found this http://forum.xda-developers.com/showthread.php?t=2045563
where they say that once you are unlocked you shouldn't flash with odin... I guess I messed up...
My imei matches, the phone has not been reported, whenever I insert a foreign sim car I don't get the network lock screen but the phone not allow mm#6 message
I think that somehow when I updated to 4.1.2 with odin... I either lost or damage my unlock
could someone help?
Thanks in advance
Click to expand...
Click to collapse
Read this thread
http://forum.xda-developers.com/showthread.php?t=2068041
Sent from my Galaxy Note ll
Hello everyone,
If you're using an SGH-T889V (originally from Vidéotron, Wind or Mobilicity) on a carrier that runs LTE on the AWS band, e.g.: Rogers, Bell, Telus, Fido, Virgin Mobile Canada, Koodo, AT&T or T-Mobile; this will allow you to enable LTE.
Note: Vidéotron has launched their LTE network in September 2014. As of writing this, it is unclear whether there will be a new T889V modem released with LTE enabled in the coming weeks, much like there was with T-Mobile USA when they launched their LTE network.
If you're using a T-Mobile USA SGH-T889, this guide isn't for you.
The usual disclaimers apply.
Actually, let me rephrase that: This mod permanently damages your phone, and irrevocably voids your warranty.
No one has been able to flash back to a T889V modem (be it ALJ4, BMA3, CMK4 or DNE7) without encountering bootloops afterwards.
Interestingly, T889VVLUDNH2 did not bootloop, it simply showed an "unknown" IMEI and baseband with no network connection.
Some background:
A rather lengthy post explaining what I did and what happened
TL;DR version of same
Additional relevant threads:
Getting LTE to work on fido
Need Help Please WIND 889V Borked
You'll need:
LTE - Coverage, known working microSIM, proper plan and system provisioning, etc...
Proper APN settings for your carriers on hand. (Better yet if you're running TouchWiz ROMs: proper CSC files and knowledge on how to modify and apply those.)
ADB
Clockworkmod/TWRP recovery
CWM/TWRP flashable I317M modem image. (I originally used the BMA3 modem, although the mod should work with any of them.)
Bell/Rogers/Telus I317M modem files
I317MVLALJ2 4.1.1 initial release (This one could be of interest for unlock purposes...)
I317MVLBMA3 4.1.2
I317MVLUCMK5 4.3
I317MVLUDNF1 4.4.2
I317MVLUDNF3 4.4.2 (I haven't downloaded the full Odin image and prepared a zip for this one.)
I317MVLUDNH2 4.4.2
Mobilicity/Vidéotron/Wind T889V modem files.
T889VVLALJ4 4.1.1 initial release - CAUTION: flashing this on top of a working ALJ4 modem installation has been known to cause bootloops and NV item corruption.
T889VVLBMA3 4.1.2
T889VVLUCMK4 4.3
T889VVLUDNE7 4.4.2
T889VVLUDNH2 4.4.2
Once you've downloaded the above files:
Backup your NV settings (in CDMA Workshop text format) as per this thread. You can also use the EFS Professional Tool (currently at version 2.1.61) almost identically to the older NV_reader_writer tool. (It also contains the IMEI NV item generator functions that Peoplearmy's tool had, apparently gone missing too.)
The only things I'll add are that:
RMNET + DM + MODEM is not available, you'll have to use RNDIS + DM + MODEM instead.
Finding the COM port can be done in device manager, you may need to refresh devices or disconnect and reconnect the USB port. If it's been properly detected, you can also click the Port text to the left of the droplist, there's an autodetect function there.
Also use this guide to backup (in QPST/QXDM .qcn format): http://forum.xda-developers.com/showthread.php?t=1946915
Optional: Backup the raw mk9efs partitions too, as per @connexion2005's suggestion: http://forum.xda-developers.com/showthread.php?t=2079705 (they're not necessary for the mod itself, and are only made as an additional precaution)
Optional: Backup the raw mk9efs and efs partitions with this CWM or TWRP "flashable" zip based on the Synergyrom team's work. It outputs the dumps in a ready-to-flash restore zip.
Consider backing up other files and data from your phone with the usual complement of Titanium Backup, nandroid and so on. Copy those off the phone.
If you're running an AT&T or T-Mobile ROM: you may have to flash another ROM as well. The stock T889V ROM has a "Network Mode" setting that lets you toggle between LTE/WCDMA/GSM, WCDMA only and GSM only. The I317M and N7105 ROMs also have this, while the I317 and T889 probably don't.
On the T889V ROMs: to see LTE become an option, you'll need to edit your CSC files and remove the <CscFeature_Setting_DisableNetworkMode>lte</CscFeature_Setting_DisableNetworkMode> line in /system/csc/others.xml. This setting is only cosmetic: the notification bar icon will show "4G" and you won't see LTE in the network mode settings. However, the phone will still use LTE, which can be confirmed by looking in Settings / About Phone / Status. (I've come across this while flashing ROMs with unaltered CSC files.)
Let's proceed with the actual modification:
Reboot to recovery, flash the 317M BMA3 modem. Wipe /cache and Dalvik cache for good measure.
Reboot phone. No bootloops? Good.
Check in Settings / About Phone that you still have a valid IMEI. (It's possible you still do at this point.)
Reboot the phone. This time the IMEI and service should be lost.
Using the same procedure you did to back them up, restore your NV items.
Reboot the phone.
Confirm your IMEI is correct and that you have service.
Check in Settings: Wireless and networks -> More settings -> Mobile Networks -> Network Mode that LTE/WCDMA/GSM is selected. Another menu worth mentioning here is the "Band Selection" menu accessed through the *#2263# dialer code. Note that if you force the phone onto the LTE bands, you will only have data service, and no voice calls or SMS.
I'd like to thank the following users for their help and feedback in writing this guide: @Byangmang, @deeznutz1977, @dspkeff, @hkfan, @rail205, @TEKHD
Good luck,
Darkshado
Thank you so much. I have been waiting for this day to come. All the best, Darkshado! :beer:
Sent from my SGH-T889 using xda app-developers app
Works. Thanks allot. Only thing I didn't do is restore the 3 files backed up via adb.
jfive74 said:
Works. Thanks allot. Only thing I didn't do is restore the 3 files backed up via adb.
Click to expand...
Click to collapse
Those are very much a belt and suspenders bit. They're not to be restored in the instructions, and my inclusion here is mostly because connexion2005 had requested a set for a JTAG repair. I'm taking a guess here, but if there's any calibration data or other phone specific parameters in there, having those from your device on hand can't be bad.
What if I suffer boot loops, didn't do any backups, and my IMEI is already Zeroed out on my T889V? How can I fix this?
I have my IMEI still since it's written on the purchase box of the phone.
I used to be wind, now virgin mobile with LTE sim. I flashed tmobile modem. No love. Flashed T889V modem back, then got boot loops.
Please help!!!
edit:
Hi Darkshado, really hoping you can help.
I've done more reading. I can't seem to make the boot loops stop.
I've done odin to factory rom image. No luck.
I tried i317 custom modem you have here on XDA, no luck. Also Tmobile modem, etc... no luck.
I used CWM and permission fix, etc.. no luck.
My boot loop is a little weird. It will boot and stay live (working - no signal though) for about a min, then it will say some android.media.process is not responding and reboot.
So I can't get NV to inject my IMEI as it will reboot too soon. From what I read, NV needs 5-10 min??
basically, I did JEDIX-15 tmobile rom install with latest tmobile modem. That's how I got into this mess. I have a T889V and virgin LTE sim such as yourself.
I just can't seem to make the boot loops end so I can move forward....
Try writing flashing back the T889 baseband and restoring a T889 or T889V NV items backup.
http://www.mediafire.com/download/p5025pxtp9vgk4k/NV_items.7z
Will this do?
T889UVBMD1
from: http://forum.xda-developers.com/showthread.php?t=2102380
I'm going to try and odin the factory image and see if that stops the reboots.
I'm guessing baseband is the same as modem correct?
I'll go give it a try now and use CWM to inject it first before I odin.
I've never done an NV restore let alone backup, so that seems to be my hick up. I'll do some research and get that done then and get back to you.
Thanks for the assistance.
edit:
I'll try to write NV, but that might be an issue since I need the phone not to reboot, and it does in under a minute usually.
Any suggestions, or specific rom I can try to write so I can eliminate the reboots so I can do the nv?
edit2:
ok, the tmo modem from that link above worked. It's not boot looping after a min now!
There is still zero signal. Does not connect. When I do *#2263# and choose automatic, it says menu does not exist, etc...
going to to try inject my IMEI with NV.
Will report back.
Edit 3
Ok, just used nv read/write to inject your t889v nv file. Then generated my imei and injected that.
reboot, and got signal! yay.
thank you so much!\
When I go to settings. I only see WCDMA/GSM/AUTO. No LTE option. I think I read somewhere that is cosmetic?
If I NV write the T889 NV file from deeznutz1977 will that fix it cosmetically?
Thanks again!
Darkshado said:
Try writing flashing back the T889 baseband and restoring a T889 or T889V NV items backup.
http://www.mediafire.com/download/p5025pxtp9vgk4k/NV_items.7z
Click to expand...
Click to collapse
20% More Awsomeness
I switched over to Telus sine Mobilicity is going under . I could only get HSPA+ @ 5Mbps, Now I too have fully working LTE. Albeit with weaker signal strenth due to higher band freqency. But I can just toogle LTE when needed. I must admit that second reboot with IMIE 0 and no service was a bit nerve racking, but the backup was flawless. Thanks a million OP. ^_^
i edited the csc called other....
and the LTE line was already not present.
The LTE option is still not in the mobile settings however.
When I do the *#2263# menu and set it to LTE the data does keep working. And I do see it in the system info. Also using a tmobile radio with the JEDI-X15 rom. yay.
But I'd like to solve the cosmetics side of it.
I did inject the t889V nv setting.... could that affect it? Would the t889 NV settings fix it?
edit:
still no luck getting LTE option to appear, although it works, I'd like to solve the cosmetic side of it.
Any help?
You can also get confirmation that LTE is active by checking in About phone / Status.
I don't feel like going through the 664 pages of the Jedi X ROM thread to see if they've altered the network icons or not. Being based on the N7105 ROMs icons with either "4G" or "LTE" captions should be present. Are you editing the active CSC files? Namely those in /system/csc/ ?
I should mention that some CSC edits only apply upon factory reset, e.g. activating WB-AMR, (a.k.a. HD Voice). One neat trick is to make a backup in recovery (nandroid or TWRP), factory reset, then reboot to recovery and restore the backup. I don't recall if this applies to the network icon related lines or not.
Older Modems
Question?
As I stated before it was a smooth transition. But... Some claim the older modem worked better (I317M-I317MVLALJ2). I tried through TWRP as before but the return status says FAILED. No changers are thus made. Any ideas? Thanks.
I've been able to flash back and forth between ALJ2 and BMA3. You're saying the linked ALJ2 zip refuses to flash? I'll have to check, but this might take a few days as I'm:
-rather busy IRL
-stuck using my old laptop (mushy, thoroughly worn out keyboard with an overzealous enter key that fires the moment you hint at touching it and a dead left shift key) while the other is in warranty repair (failing PSU seems to have damaged the motherboard and/or dGPU)
Goodbye,
Darkshado
Darkshado said:
You can also get confirmation that LTE is active by checking in About phone / Status.
I don't feel like going through the 664 pages of the Jedi X ROM thread to see if they've altered the network icons or not. Being based on the N7105 ROMs icons with either "4G" or "LTE" captions should be present. Are you editing the active CSC files? Namely those in /system/csc/ ?
I should mention that some CSC edits only apply upon factory reset, e.g. activating WB-AMR, (a.k.a. HD Voice). One neat trick is to make a backup in recovery (nandroid or TWRP), factory reset, then reboot to recovery and restore the backup. I don't recall if this applies to the network icon related lines or not.
Click to expand...
Click to collapse
yep, I edited those CSC files as per your original write up.
I did not factory reset. And yes, you are right. A good example is the Nexus 4. It needs a factory reset to keep the LTE settings ( unless you go to the "INFO" menu, and then you need to reset again.
Okay, I'll try the reset tonight. See what happens. And yes, I see LTE in system info.
Also, when I use speedtest, it records it as lte.
Honestly, I'm just happy it works again...
Darkshado said:
I've been able to flash back and forth between ALJ2 and BMA3. You're saying the linked ALJ2 zip refuses to flash? I'll have to check, but this might take a few days as I'm:
-rather busy IRL
-stuck using my old laptop (mushy, thoroughly worn out keyboard with an overzealous enter key that fires the moment you hint at touching it and a dead left shift key) while the other is in warranty repair (failing PSU seems to have damaged the motherboard and/or dGPU)
Goodbye,
Darkshado
Click to expand...
Click to collapse
Problem Solved. The issue was I am using SDCard encryption. For some reason TWRP can SEE the cards files, but not use them. When I moved the modem to internal it installed fine. Sorry bout that.
If I enable lte using this method then will aws still works for WindMobile?
Sent from my SGH-T889 using Tapatalk 2
hkfan said:
If I enable lte using this method then will aws still works for WindMobile?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Probably Not? There are threads of people trying to get there i317 to work with AWS. http://forum.xda-developers.com/showthread.php?t=2068041
Then again this is a t989v. Don't risk it unless your prepared to not go back.
hkfan said:
If I enable LTE using this method then will AWS HSPA still work for WindMobile?
Click to expand...
Click to collapse
It should. My data in this department is very limited, since I don't have an active Videotron account on hand. With that said, I got a working speed test on Videotron's AWS HSPA shortly after sorting my phone out this winter. (I simply dropped by one of their stores while at a shopping mall and nicely asked a sales rep to borrow an active SIM card. Showed her the menu unlock method as a thank you.)
I also got to use the phone with T-Mobile USA earlier this year, getting both HSPA (some of it likely AWS, though I didn't get the time to check) and LTE.
@Darkshado thank you very much for the T889VVLUDNE7 modem. I just flash the zip in cwm and it work perfect for my Videotron T889V.
Thanks for putting this together!!
Quick question - I have a t889v from Wind Mobile. I switched carriers to Rogers, and in the process screwed up my phone and had no IMEI/Baseband. Had to send it in for repair to replace the board. It came back with the baseband T889UVUCMK7.
Do you think I can still use this method? I'm currently running a T-mobile Touchwiz 4.4.2 ROM (Test Rom v1.2).
What does download mode give as product ID? You may well have a U.S. board in there now.
The later T-Mobile T889 basebands support LTE out of the box. Make sure your APN settings, plan and SIM card are correct, and that the modem you have does support LTE; if not, you might just need to update that.
I know some people here followed essentially the steps I did, but with the T889 modem instead, but I don't think it applies here.
Good luck,
Darkshado
Sent from my T0LTE using XDA Free mobile app
My problem:
My galaxy s3 takes a LONG time to connect to AT&T when it boots up (over 5 minutes), and then only has Edge:2 network service.
How I got here:
Had 4.1.2 installed from AT&T
I rooted my phone with the "no countering tripping method" as described here: http://forum.xda-developers.com/showthread.php?t=1739426 to 4.1.1 this downgrade apparently made something not work, I kept getting errors, something about acore process failures.
I re-installed the stock 4.1.2 from AT&T
Still getting process failures
Read that clearing the contacts sometimes works, it didn't
Read that factory reset helps, it did
I still wanted a rooted phone, so this time I used this method: http://forum.xda-developers.com/showthread.php?t=1746665
Again processes started crashing
Again had to reset to factory
Now I noticed my phone wasn't working at all
Found that my IMEI was set to 0
Fixed that by following these instructions: http://forum.xda-developers.com/showthread.php?t=1804117
Note: the link to the sgs3.nv.gen.zip was bad, I found another here: http://forum.xda-developers.com/showthread.php?t=2335951 but my virus checker freaked out on it. I ran it on my kids pc, and it worked, don't know if I infected them or not, but I got my IMEI data back
Decided all this was too much hassle, so I reset my flash count to zero with this: http://forum.xda-developers.com/showthread.php?t=1494114
Reverted to stock 4.1.2 from AT&T and reset to factory
Still stuck on Edge:2
Found this thread: http://forum.xda-developers.com/showthread.php?t=2036891 my phone won't let me change my band preference, also under *#197328640#>SIM>CHECK NV it say "Band perf: Unexpected value"
Question:
Where do I go from here?
Thanks!
thabin said:
My problem:
My galaxy s3 takes a LONG time to connect to AT&T when it boots up (over 5 minutes), and then only has Edge:2 network service.
How I got here:
Had 4.1.2 installed from AT&T
I rooted my phone with the "no countering tripping method" as described here: http://forum.xda-developers.com/showthread.php?t=1739426 to 4.1.1 this downgrade apparently made something not work, I kept getting errors, something about acore process failures.
I re-installed the stock 4.1.2 from AT&T
Still getting process failures
Read that clearing the contacts sometimes works, it didn't
Read that factory reset helps, it did
I still wanted a rooted phone, so this time I used this method: http://forum.xda-developers.com/showthread.php?t=1746665
Again processes started crashing
Again had to reset to factory
Now I noticed my phone wasn't working at all
Found that my IMEI was set to 0
Fixed that by following these instructions: http://forum.xda-developers.com/showthread.php?t=1804117
Note: the link to the sgs3.nv.gen.zip was bad, I found another here: http://forum.xda-developers.com/showthread.php?t=2335951 but my virus checker freaked out on it. I ran it on my kids pc, and it worked, don't know if I infected them or not, but I got my IMEI data back
Decided all this was too much hassle, so I reset my flash count to zero with this: http://forum.xda-developers.com/showthread.php?t=1494114
Reverted to stock 4.1.2 from AT&T and reset to factory
Still stuck on Edge:2
Found this thread: http://forum.xda-developers.com/showthread.php?t=2036891 my phone won't let me change my band preference, also under *#197328640#>SIM>CHECK NV it say "Band perf: Unexpected value"
Question:
Where do I go from here?
Thanks!
Click to expand...
Click to collapse
This just happened to me too. I backed up my IMEI but lost it and had to get a new phone. I used QPST tool to restore my IMEI , which is located behind your battery. I did not work. There is another tool called NV Generate or something like that and still it did not work. I did not like spending the money for a warranty replacement, of course, so looked and tried hard for a fix. Since nothing worked I am also thinking that its possible I had a hardware problem, but I can say that an IMEI issue can be as bad as hardbricking, so proceed with caution and follow to a T. Good luck bro. I hope you can fix it. Let me know if you have a chance.
Edit: I missed the part about you using NV tool. I spoke with a bunch of Att help and a Samsung guy as well. Nobody knew about it. Mine was 5 freaking days past warranty. Still sick from that. If you are under warranty. Take it back.
I'm also having these issues..
Anyone have a true fix? I would go back to Full Stock, but have already tried that and still had the data issues. Something is hosed that needs to be fixed..
Fixed!!
I bought a new phone from AT&T, copied the nv config using the instructions here:
http://forum.xda-developers.com/showthread.php?t=1804117
Changed the IMEI to my phone's IMEI, and EUREKA! It works!
I'm attaching the file I used (with the IMEI blanked out, so be sure to fill in our own IMEI or this won't work for you, it is section 550, see http://forum.xda-developers.com/showthread.php?t=1804117 for more details).
I hope this helps others, and they don't have to pay the $35 restocking fee.
thabin said:
I bought a new phone from AT&T, copied the nv config using the instructions here:
http://forum.xda-developers.com/showthread.php?t=1804117
Changed the IMEI to my phone's IMEI, and EUREKA! It works!
I'm attaching the file I used (with the IMEI blanked out, so be sure to fill in our own IMEI or this won't work for you, it is section 550, see http://forum.xda-developers.com/showthread.php?t=1804117 for more details).
I hope this helps others, and they don't have to pay the $35 restocking fee.
Click to expand...
Click to collapse
This is exactly what I need! Thank you! My usb is corroded so I cannot connect usb and will have to load this manually. Could you please tell me the exact process you used to add your EMEI # to the file? I have opened the text file and went to section 550, but I do not know if i'm properly changing the number.
bweyadn said:
This is exactly what I need! Thank you! My usb is corroded so I cannot connect usb and will have to load this manually. Could you please tell me the exact process you used to add your EMEI # to the file? I have opened the text file and went to section 550, but I do not know if i'm properly changing the number.
Click to expand...
Click to collapse
I fixed the IMEI using the following instructions:
http://forum.xda-developers.com/showthread.php?t=1804117
The link on that page for the utility to generate a new IMEI didn't work, but I found another copy here:
http://forum.xda-developers.com/showthread.php?t=2335951
*WARNING* my virus checker freaked out about this file. I ran in on my kids machine (not mine) and it seemed to work fine, but I want you to be warned about the royal freakout my virus checker gave me.
thabin said:
I fixed the IMEI using the following instructions:
http://forum.xda-developers.com/showthread.php?t=1804117
The link on that page for the utility to generate a new IMEI didn't work, but I found another copy here:
http://forum.xda-developers.com/showthread.php?t=2335951
*WARNING* my virus checker freaked out about this file. I ran in on my kids machine (not mine) and it seemed to work fine, but I want you to be warned about the royal freakout my virus checker gave me.
Click to expand...
Click to collapse
I got almost just the identical problem... However, I checked my phone and my IMEI number is still intact... yet im stuck on EDGE
story was that I brought my rooted S3 from ATT (but not unlocked) to China 2 weeks ago hoping to use the phone on China Mobile's network (though knowing that China Mobile doesnt support the same band for 3g/4g as the US).
It wasn't til after inserting the sim that I realized I havent unlocked the phone yet... and since ATT won't give me the unlock code, I ended up trying to use the *#197328640# method, which was unsuccessful because I was still on ICS and this method requires Jellybean.
So in a hurry I used odin to upgrade to a jellybean version that apparently wasn't compatible with my I747.
After taking to a local shop, the dude repairing my phone was able to get the OS running again but it was weird in that even with an ATT sim card the phone would ask for an unlock code.
So finally after doing the re-flash of the official ATT I747 Jellybean rom, I was able to get into the *#197328640# menu and unlock my phone using
the second method mentioned in here: http://www.wikihow.com/Unlock-Samsung-Galaxy-Siii-(S3)
I was happy to get it to work with China Mobile's sim even though I can only use EDGE over there, but I also realize the dreafully long wait time for the phone to get a signal from power on.
After coming back to the States today and inserting my original ATT sim card, I noticed that it still takes a long time for the phone to get a signal after power on and after it acquires the signal from ATT, Im only getting signal (feels almost like the phone is stuck in the international setting...)
I have tried to reflash to z999 rom with cwm, tried to reflash the modem firmware, nothing is working.
My IMEI is still showing up in the "status" under about this phone, and its the same number as it appears in the back of the phone...
but for some reason I feel like this might have something to do with the fiddling of the secret code menu during my unlock oversea... since I had to go into the UMTS menu (which I believe is for EDGE)...
Since my IMEI isnt lost... anyone have any ideas what could have been the problem? This is getting beyond frustrating... would really appreciate the help!