CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
As we got CM11.0 to beta-state fast, I decided to run weekly builds of it.
What are Weekly builds?
CM11.0 builds of the latest CyanogenMod sources from github, and latest armani-dev sources from GitHub so you always have latest CM features and fixes, and latest changes made by armani-dev.
New version will come out every week, most often during the weekends.
This is not a replacement for development thread. Post bugs there!
Click to expand...
Click to collapse
Original CM11 thread (htcmania): http://www.htcmania.com/showthread.php?t=893300
Original CM11 thread (xda): http://forum.xda-developers.com/redmi-1s/orig-development/rom-unofficial-cyanogenmod-11-t2909757
all credits: armani-dev(fefifofum, Kra1o5)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now [STRIKE]void[/STRIKE] intact.
* Xiaomi is one of the OEMs who allow rooting, etc.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit their Gerrit Code Review.
Downloads
Weekly #2: cm-11-20141018-UNOFFICIAL-armani.zip
Weekly #1: cm-11-20141006-UNOFFICIAL-armani.zip
Google Apps: gapps-kk-20140606-signed.zip
Bugs
- you say!
Installation
- Flash official TWRP recovery (http://en.miui.com/thread-29291-1-1.html)
- Reboot into recovery
- wipe data/factory reset + wipe cache partition
- Install the ROM from internal memory/external sdcard from TWRP
- optionally install the Google Apps (support regarding Google Apps will not be provided by OP)
Changelog
Full changelog can be found on armani-dev Github, just check the sources!
FAQ
q: this error occours, will it be fixed with the next release?
a: not until I do not get the magic ball which can repair errors without logcat/kmsg.
q: Where are "Developer options" and "Performance" in Settings?
a: you must press the "Build number" 7 times in the "About phone"
q: I have a gray dot on top every time I enter the PIN. Is it normal?
upstream derp. doesn't affect functionality.
q: I do not sound the calls I get from SIM 2
a: upstream derp. second sim ringtone isn't set by default.
you must configure it.
open dialer
open menu -> settings -> subscription settings
switch to second tab (with your carrier name)
set ringtone
is the volume is lower than in MIUI?
no, is the same.
Can I install apps from MIUI to CyanogenMod?
Most likely no and if you want to discuss please open another thread.
Could you add a feature that is present in another rom?
no; only features present in official CM.
Reserved!
Thanks Mate!!
doubt
whats is the difference between..this and the other cm..?
Johnny199314 said:
whats is the difference between..this and the other cm..?
Click to expand...
Click to collapse
Both have different purposes.
there focus is on 'RC' builds, i.e. 'Release Candidate' while this one focuses on 'weekly' builds (similar to 'nightlies'); and it would defeat the purpose of mixing both the threads.
thewisenerd said:
Both have different purposes.
there focus is on 'RC' builds, i.e. 'Release Candidate' while this one focuses on 'weekly' builds (similar to 'nightlies'); and it would defeat the purpose of mixing both the threads.
Click to expand...
Click to collapse
thnxx a lot just now flashed..will say u if thr is any error..thnx mate
@thewisenerd thank for weeklies update...,this is amazing! but why did you delete your thread in the forum MIUI redmi 1s?
dapra95 said:
@thewisenerd thank for weeklies update...,this is amazing! but why did you delete your thread in the forum MIUI redmi 1s?
Click to expand...
Click to collapse
It was deleted by the moderators for being what they considered a 'duplicate thread', and it seems they don't want 'another' cm11 thread.
thewisenerd said:
It was deleted by the moderators for being what they considered a 'duplicate thread', and it seems they don't want 'another' cm11 thread.
Click to expand...
Click to collapse
oh ... sorry about that, nope I can still enjoy the rom weeklies here. once again thank you ...
fefifofum, Kra1o5
and your participation in weeklies update ...
enjoy ...
latest link
cm-11-20141009-UNOFFICIAL-armani.zip
will there be an update..it has been a week
Johnny199314 said:
will there be an update..it has been a week
Click to expand...
Click to collapse
Since RC6 was released a couple of days ago, there'll be no weekly this week.
thewisenerd said:
Since RC6 was released a couple of days ago, there'll be no weekly this week.
Click to expand...
Click to collapse
oh k bro..thnxx :laugh::good:
camera quality
I have tried cm 11 rc r6 and mokee rom in both roms the camera quality is very poor there are huge grains in the photos captured .....is thos bug also there on this rom
hi bro! good to see you again!! Damn!.. feeling awesome to own this Phone!! :highfive:
And just being curious that does this rom has music glitches Bug??
Again Good to see you here!! :silly:
ateeq72 said:
hi bro! good to see you again!! Damn!.. feeling awesome to own this Phone!! :highfive:
And just being curious that does this rom has music glitches Bug??
Again Good to see you here!! :silly:
Click to expand...
Click to collapse
I don't face any music glitch bug! :highfive::victory:
i've got a problem while my phone restarted.
phone stuck on MI logo after i set account, restart it and the phone is stuck on MI screen (no cm boot animation appear).
Gta san andreas lags insanely , iam experiencing antutu benchmarks as low as 15268:crying:
th30nly said:
i've got a problem while my phone restarted.
phone stuck on MI logo after i set account, restart it and the phone is stuck on MI screen (no cm boot animation appear).
Click to expand...
Click to collapse
fixed using this method.
flash using TWRP Recovery then remove the battery about 1 min after flashing process finish.
pray
place the battery then turn on your phone.
wait until MI logo away and Cyanogen logo appear. (aproximately 5-15min at worst)
The problem now below :
Black transparent big Dot always appear after device restarted.
location is in the top center of screen (see attachment)
Cannot detect Carrier Name on SIM 1 Telkomsel.
Audio is Low (anything)
anyone have cure with this issues ?
th30nly said:
The problem now below :
Black transparent big Dot always appear after device restarted.
location is in the top center of screen (see attachment)
Cannot detect Carrier Name on SIM 1 Telkomsel.
Audio is Low (anything)
anyone have cure with this issues ?
Click to expand...
Click to collapse
upstream derp; something related to msim
idk, seems upstream too. anything related to msim is upstream. know that msim is/was originally committed to CAF, iirc; with OEMs merging in those patches. CM merges these patches from CAF, so... can't say if they messed up, or we did. In any case, I don't face this bug (status: can't reproduce, won't fix.)
no, it isn't. it is the same as miui. If you are speaking about the speakers, I can't say much though. I (frankly speaking) don't like blaring speakers, and there have been not much commits affecting (in essence, decreasing) the speaker volume in armani-dev. There've been a few commits for improving/increasing the audio though (mainly, in-call audio). Most of these changes have been incorporated in CM11 RC6, and will be merged into the next weekly.
Related
Nightly builds for the cm-10.2 branch for this device have stopped.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Q/A thread:
http://forum.xda-developers.com/showthread.php?t=2296266
Please use the above unless you have something development-related to contribute here. Thank you.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 10.2 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Useful Links
BBQLog changelog
jfltexx CyanogenMod wiki
Jira issue tracker
Other Issues?
Before posting on this thread, make sure of a few things:
Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
Download Links
CyanogenMod:
Download: http://download.cyanogenmod.org/?device=jfltexx&type=stable
Google apps addon:
Download: http://wiki.cyanogenmod.org/w/Google_Apps
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 10.2 for the Qualcomm Intl Galaxy S4, a ROM for the Samsung Galaxy S 4
Contributors
invisiblek
Version Information
Status: Testing
Created 2013-09-13
Last Updated 2014-04-23
Wifi Issues?
See here: http://forum.xda-developers.com/showpost.php?p=42384912&postcount=101
YEah! Camera quality and problems with it to report?
Yeah nice to have official cm.
Yeahhh finally!! . Great!
Gesendet von meinem GT-I9505 mit Tapatalk 2
*****! Nice to have CM officially on the i9505 :highfive:
Edit: Had to remove rm /data/.cid.info in order to get wifi working tho. Working fine since. 5C:F8:A1: Thanks.
Yeah Dan,
very very glad to see you here
Awesome DEV!!!!!
Greets from Germany
-sandro- said:
YEah! Camera quality and problems with it to report?
Click to expand...
Click to collapse
The ROM works nice for me, no issues at all. Camera quality is quite good, photos and videos work. I think the stock ROM's photos were a little bit sharper, but it's not a big difference.
CaptnKernel said:
The ROM works nice for me, no issues at all. Camera quality is quite good, photos and videos work. I think the stock ROM's photos were a little bit sharper, but it's not a big difference.
Click to expand...
Click to collapse
What about the front facing camera? When I tried unofficial CM builds it had a wrong aspect ratio and slow fps!
good job is it working ok wifi 3g etc or not?
thanks btw
Mohanned85 said:
good job is it working ok wifi 3g etc or not?
thanks btw
Click to expand...
Click to collapse
Both are working fine.
Well, Wifi is not working and no network too...
What I cannot undestand with the i9505 is that people have different issues despite of the same hardware !
How can you explain this ?
supertack said:
Well, Wifi is not working and no network too...
What I cannot undestand with the i9505 is that people have different issues despite of the same hardware !
How can you explain this ?
Click to expand...
Click to collapse
Suggest you read post 1 & 2 and follow the links.
wifi not working
do i need wipe all data etc seeing i coming from old cm10.1 but not official?
-sandro- said:
What about the front facing camera? When I tried unofficial CM builds it had a wrong aspect ratio and slow fps!
Click to expand...
Click to collapse
Haven't tested; since my battery is empty i will report later
Yaaay for official nightlies
I do have the problem that my simcard is not being detected (Emergency only), or is this the metioned "Data issues"?
In order to fixe wifi and radio issues, you can flash this file made by Victorator :
http://d-h.st/vj1
However, I don't now if this file is up to date or if it will be merged in next nightlies...
So i9505 is finally in the official device list
supertack said:
In order to fixe wifi and radio issues, you can flash this file made by Victorator :
http://d-h.st/vj1
However, I don't now if this file is up to date or if it will be merged in next nightlies...
Click to expand...
Click to collapse
still no wifi
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Download
RECOVERY: Androidfilehost twrp-3.0.0-0-idol347-f2fs.img
ROM: Androidfilehost cm-12.1-20160209-UNOFFICIAL-idol347.zip
GAPPS: OpenGAPPS
Changelog
Code:
Current changelog: 2016-04-05
- Security Patchlevel April
- support 6039H
- small changes from upstream
Older changelogs:
Code:
2016-02-09
- Security Patchlevel February
- fixed some selinux denials
- removed obsolete script for variant identification
2016-01-31
- added support for 6039J (thanks @Faustop)
- lockscreen rotation toggle should now work as expected
- removed some unused services (thanks @Unjustified_Dev)
- added sepolicy (might cause some issues, please test)
2016-01-14
- fix inverted camera for those with samsung rear cam (confirmation needed)
- lockscreen rotation can be toggled now
- Security Patchlevel January
2016-12-09
- Now supports A, K,S and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- minor changes to camera
- Security Patchlevel December
2015-11-27
- Now supports A, K and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- LTE can now be chosen as preferred network
- added tethering options
- fixed writing to sd card
Detailed changelog:
https://github.com/pivoq/android_device_alcatel_idol347/compare/aa2b95e...pivoq:3df7e26
2015-11-18
- fixed regression which prevented access to bootloader
- added some missing camera blobs
- removed lots of unused stuff
- added some system.prop optimizations from upstream cm
2015-11-15
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g [URL="https://www.androidfilehost.com/?fid=24269982086999020"]this one[/URL])
2015-11-09
- initial release
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@Unjustified Dev
@petrov.0
@ashwin007
XDA:DevDB Information
CyanogenMod 12.1 for Alcatel ONETOUCH IDOL 3 4.7, ROM for the Alcatel Onetouch Idol 3
Contributors
pivoq, Unjustified Dev, petrov.0
Source Code: https://github.com/pivoq/android_device_alcatel_idol347
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-09
Last Updated 2016-04-06
Reserved
As requested, here's a thread for the 4.7" device. The build runs fine on my end without any major flaws (6039Y), however I expect rough edges on other device variants, especially those featuring dual sim functionality.
So please give feedback and provide logs if you find any bugs.
I really don't want this to be a one man show, so I encourage everyone willing to build/contribute to check out my github and get involved!
Oh! great
First release going to test this
Thanks @pivoq :good:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Nelle9900 said:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Click to expand...
Click to collapse
Could you please be more specific on what bugs you are talking about
too bad there is no stock camera
pivoq said:
Could you please be more specific on what bugs you are talking about
Click to expand...
Click to collapse
Sometimes terbuchet or what else, stopped working. I do factory reset today and i didn't see again that problem. Maybe it fixed the problem, consider that solved.
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
One thing i noticed when i place a call, that is seems to be to quiet sound. I can't sometimes clearly hear what is person talking to me. But not a big problem, it heppens sometimes.
Problem on instagram is solved with this rom. On 5.0.2 I have video problem on instagram, video do not play always.
My recommendation is kernel tweaks, maybe some minor overclocking to cpu and gpu, just for test, maybe that will speed up a lilttle bit this respectable device we have.
Best regard man and sorry for my bad english
And can someone post fleshable kernel of this rom? Thanks in advance.
Nelle9900 said:
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
Click to expand...
Click to collapse
You can disable it in settings
Nelle9900 said:
And can someone post fleshable kernel of this rom? Thanks in advance.
Click to expand...
Click to collapse
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
thanks to make this for 4.7. system working faster than stock.
- nice audio equalizer but black player got better
- there is cm camera but missing some manual options like shutter speed - so i wait for change this
- double tap to on/off - there is trick to use gesture with nova launcher and app "screen off and lock" but when you are in lock screen tap working only around status bar
pivoq said:
You can disable it in settings
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
Click to expand...
Click to collapse
I know that u can disable it, i didn't mean that, i love that option, but personaly didn't like to tap on status bar, it's better to tap on screen (midlle of screen). But it's okay man
Kernel - i don't know how to download fleshable kernel from github
I wont to mod the kernel, set a higher freq for cpu and gpu = overclock. If you know how to download and make a flashable kernel i will mod it.
First post was updated with latest build.
Current changelog: 2015-11-14
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g this one)
Google service isn't working.
I can't login.
"Unfortunately, Google has stopped play services."
I tried opengapps pico, nano, stock, super.
Older versions work fine
Same problem here, opengapps crashing, i will try with an older version of gapps
edit: still fc, even with 04-04-2015 gapps 5.1.1 version :-s
logs or didn't happen
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Scutariu said:
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Click to expand...
Click to collapse
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
pivoq said:
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
Click to expand...
Click to collapse
I can't acces play store, when I try to add my google account, it crashes automatically
Scutariu said:
I can't acces play store, when I try to add my google account, it crashes automatically
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/googl...ebview-47-0-2526-61-arm-android-apk-download/
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
These are UNOFFICIAL CyanogenMod builds built using the UBER-Toolchain (refer: https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp ).
FOR UNLOCKED BOOTLOADERS ONLY!
Features:
These builds are completely based on CyanogenMod sources, and contain no modification of framework from my end.
WORKING:
Mostly Everything
NOT WORKING/BUGGY:
Camera, although present, is laggy and a WIP (like all other MM ROMs)
INSTRUCTIONS
-> Backup all important files
-> Boot into recovery
-> Wipe data/Factory Reset
-> Flash ROM
-> Flash GApps (optional)
-> Reboot
DOWNLOAD:
All builds can be downloaded from my AndroidFileHost folder linked below.
ROM: https://www.androidfilehost.com/?w=files&flid=57341
GApps: http://opengapps.org/
CHANGELOG:
Code:
[U]22-Sept-2016
-> Edited changelog after a long time :P
-> Switched to 1.3.3 branch of unified kernel
-> Using latest blobs from Sony.
-> Boot to recovery from OS finally works
-> Latest CM sources and upstream updates.
[U]07-May-2016[/U]
-> Latest v5a blobs from Sony
-> Fixed all calling and data issues.
-> Bootanimation scaling issue fixed.
-> Based off AICP tree. (Thanks to everyone who's contributed to that, especially be_mler_)
[U]11-March-2016[/U]
-> Include March security updates.
-> Latest CM Sources.
-> Fixed Recovery (CM Recovery is present now).
[U]08-March-2016[/U]
-> Initial bringup
The best way to appreciate someone's work is by pressing that Thanks button
XDA:DevDB Information
UBER-CM, ROM for the Sony Xperia Z1
Contributors
drakonizer
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-03-08
Last Updated 2016-09-22
Reserved
STATE OF CAMERA:
As you may already be knowing, camera for Sony devices on Marshmallow is not stable yet. This is because Sony has decided to go open source (as much as possible) with the camera drivers. But don't worry, we've a lot of great developers working on it, and I have no doubt it will be stable very soon. Right now, the camera in this ROM is an indication of how much we've progressed.
Camera works for most parts at the moment. With the 22nd April release of the camera binaries, the camera seems to focus perfectly.
-> The rear camera has issues with low light photography, but in good lighting, pictures are really good.
-> The front camera is stable, and you can take decent photos in good lighting.
-> Camera works only with CM's Snap Camera app. Other apps have broken previews (which means WhatsApp web, Skype, and other such apps won't work).
Test it out and see if it's good enough for you. If not, well, you have been warned.
UPDATE 22/09: The latest build breaks the camera. THE CAMERA DOES NOT WORK. If you need the camera stay away. You're free to use the old build in which camera works as mentioned above
Reserved
Woah!
Great Work My Friend
Keep it up
thnx.!!!! you rock.!
One problem. When i charge phone to nighte , mornight is off. Sory my english.
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
drakonizer said:
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
Click to expand...
Click to collapse
Maybe he's telling you that he has random reboot, while charging at night
Videocalls won't work bro
brickhayabusa said:
Videocalls won't work bro
Click to expand...
Click to collapse
As said in the OP, camera is a developer preview at the moment and we'll have to wait for Sony to bring in the improvements. There's nothing I can do.
Sent from my Xperia Z1 (AOSP) using XDA Labs
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
Would you please say the problem you are facing in your language and we can translate it. I want to know if this is a bug or what!
@edit downloaded the stuff and fixing here, thanks for helping.
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
topsecret78 said:
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
Click to expand...
Click to collapse
I've never experienced this bug. If you can reproduce it, do a force shutdown by holding POW+VOL UP for 9 seconds and power on the device again. After that use http://forum.xda-developers.com/showthread.php?t=1520508 to get the last_kmsg and give it to me.
I know how to reset the phone, I forgot to do logcat. Just when I froze the night the phone later in the day time I am quickly changed the system because I was afraid that the route it gets.
Great rom. Thanks @drakonizer
Just one question, how to get root?
Edit: Got the root \o/
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
drakonizer said:
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
Click to expand...
Click to collapse
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
optimumpro said:
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
Click to expand...
Click to collapse
Please find screenshot attached.
Sent from my Xperia Z1 (AOSP) using XDA Labs
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOSGithub repo.
These are unofficial (and probably unstable) builds of CyanogenMod/LineageOS 14.1 (which is a work in progress) by me, using sonyxperiadev sources.
Features:
These builds are completely based on CyanogenMod/LineageOS sources, and contain no modification of framework from my end.
WORKING:
Mostly Everything
DEEP SLEEP
NOT WORKING/BUGGY:
Camera. It works well, but only in good lighting. New blobs will fix this.
Video recording is broken.
INSTRUCTIONS
-> Backup all important files
-> Boot into recovery
-> Wipe data/Factory Reset
-> Flash ROM
-> Flash GApps (optional) (I use OpenGApps)
-> Reboot
DOWNLOAD:
All builds can be downloaded from my AndroidFileHost folder linked below. LineageOS builds my markakash can be found in his post on this thread (use the search function for once).
ROM
GApps
CHANGELOG:
Code:
[U]07-November-2016[/U]
-> Initial Release
SOURCES:
-> https://github.com/SonyCM
-> https://github.com/SonyAosp
-> https://github.com/sonyxperiadev
Credits to all the developers who have contributed to these projects including jerpelea, alviteri, munjeni and erikcas.
The best way to appreciate someone's work is by pressing that Thanks button
XDA:DevDB Information
LineageOS 14.1, ROM for the Sony Xperia Z1
Contributors
drakonizer, markakash
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must have flashed the latest stock (.236) ROM at least once
Based On: LineageOS
Version Information
Status: Beta
Created 2016-11-08
Last Updated 2017-07-03
Reserved
Reserved
Hot damn, time to get flashing! Nice work, man
which Gapps should we flash on this CM14 ROM?
First of all,
Thanks a lot!!
Second, total views ram is 1,4 [try this fix ( https://github.com/SuperLamic/device-sony-honami/commit/cbef17709eba4472e33fde7b26eb776017eed63b )]
Masterblop said:
First of all,
Thanks a lot!!
Second, total views ram is 1,4 [try this fix ( https://github.com/SuperLamic/device-sony-honami/commit/cbef17709eba4472e33fde7b26eb776017eed63b )]
Click to expand...
Click to collapse
Yeah I know about that. I forgot to add that. Next build will fix it. It will also include the Snap camera app, which works better in my opinion.
Mega thx for cm14.1 i will testet
Sent from my Xperia Z1 using XDA-Developers mobile app
Awesome one . :good: will try later
Hello .. thank you so much for your work .. just a small report here .. i flashed the ROM as you instructed .. but i only get a black screen with no Sony logo or anything ... recovery's LED changing from pink to orange and then just a black screen .. the phone is working though i can lock and unlock it but with the black screen .. i tried to flash it with and without the modem (C6902) .. flashed with and without GApps .. and i tried to flash it on the top of CM12.1 clean and dirty ... but still the same issue ... a small advice would be so much appreciated .. Thank you
https://github.com/sonyxperiadev/kernel/commit/2ba6990b6e22cce83d749ef71675feec7a24e312
Do you add this?
I have too dark panel.
PD: Fix the black screen too.
brickhayabusa said:
https://github.com/sonyxperiadev/kernel/commit/2ba6990b6e22cce83d749ef71675feec7a24e312
Do you add this?
I have too dark panel.
PD: Fix the black screen too.
Click to expand...
Click to collapse
I always test ROMs before I release them. I don't have the black screen issue you speak of. I don't have the contrast issues either. Its probably because of your display variant.
drakonizer said:
I always test ROMs before I release them. I don't have the black screen issue you speak of. I don't have the contrast issues either. Its probably because of your display variant.
Click to expand...
Click to collapse
i know that fact, but in the aosp rom, before that commit, the people who tried the markakash build had the screen issues, but after the commit releases and SuperLamic used it, the people who had the problem says it's fixed.
yes, it's a variant, but if you see the link says "Rhine panels are different"
brickhayabusa said:
i know that fact, but in the aosp rom, before that commit, the people who tried the markakash build had the screen issues, but after the commit releases and SuperLamic used it, the people who had the problem says it's fixed.
yes, it's a variant, but if you see the link says "Rhine panels are different"
Click to expand...
Click to collapse
Well, they're all not different. I'm running an aftermarket display and the contrast ratios are PERFECTLY fine.
Take a look:
Status battery style (circle) not working
Sent from my Xperia Z1 using XDA-Developers mobile app
Thanks a lot for your hard work dev (Y)
Seems cm hasn't implemented their theme engine yet right? At least in nougat...
@drakonizer when i connect charger battery not charging and in setting too status not charging
but when i power off the phone it's work but too slow
is that general bug or ?
Charging works for me ( It didn't work on any of Aosp builds) perfectly only on this rom.Aftermarket Lcd is also working without flickering. My only request is could you compile kernel with enforcing so as to be able to pass Safetynet
santeria27 said:
Status battery style (circle) not working
Click to expand...
Click to collapse
That's an issue with CM. They'll probably fix it. As you know, cm14.1 is a work in progress.
caki25 said:
Seems cm hasn't implemented their theme engine yet right? At least in nougat...
Click to expand...
Click to collapse
See above for answer.
DectonX said:
@drakonizer when i connect charger battery not charging and in setting too status not charging
but when i power off the phone it's work but too slow
is that general bug or ?
Click to expand...
Click to collapse
That's an issue with only some devices, and none of the devs have it. You'll need to provide logs (logcat and dmesg) for us to debug it.
pokepokepoke said:
Charging works for me ( It didn't work on any of Aosp builds) perfectly only on this rom.Aftermarket Lcd is also working without flickering. My only request is could you compile kernel with enforcing so as to be able to pass Safetynet
Click to expand...
Click to collapse
None of our ROMs (mm and N) have SELinux enforcing, I dont know why. I'll try to make the next update that way, but only as long as things work as well as they do now.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart)
This rom requires the Marshmallow boot loader.
gcrutchr said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @[email protected]@[email protected]@[email protected]@thermskin, @javelinanddart)
Click to expand...
Click to collapse
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
mohsenfa01 said:
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
Click to expand...
Click to collapse
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
mohsenfa01 said:
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
Click to expand...
Click to collapse
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
gcrutchr said:
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
Click to expand...
Click to collapse
OK , how about s pen smart text selection?
mohsenfa01 said:
OK , how about s pen smart text selection?
Click to expand...
Click to collapse
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
gcrutchr said:
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
Click to expand...
Click to collapse
Ok, this rom have issue to connecting into wireless routsr with auto band
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
mohsenfa01 said:
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
Click to expand...
Click to collapse
My wifi router (Thailand) has channels 1-13. I have no problem connecting with this rom or any other, including my Galaxy S3 which is on CM, my iPad Pro, my Note 5 and my Note Pro 12.2 (3g).
Did you clear the data before installing rom? Did you clear cache and dalvik cache?
Try downloading WIFI Analyzer on Play Store....maybe it will help.
Modem?
The sm-p901 has LTE, is this rom has it???? or I need to install custom
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
This device should only have 3G.
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
The SM-P901 does not have LTE. It is a 3G device.
There is nothing you can install to get LTE. LTE is part of the modem and the only Note Pro 12.2 device that has it is the P905 series.
Excellent
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
MyoMinhtoo said:
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
Click to expand...
Click to collapse
You're welcome!
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
mohsenfa01 said:
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
Click to expand...
Click to collapse
Windows 10? No
Linux? I have read about people running linux on an android tablet. Search XDA for the thread. It's under Android Software Development or Android Software and Hacking General.
Thank you.
How can i compile from source code?
e-sh said:
Thank you.
How can i compile from source code?
Click to expand...
Click to collapse
In the 1st post there are links to the source code. You need to set up your computer 1st to build android.
Then you can get the base android source from github and the v1a3g source code from the link in post #1.