So, You have bricked your phone by installing Xposed installer ? Thinking to download and flash stock rom ? Wait wait, why waste 500mb+ data if you can do it within 16-17mb!!
Requirements-
1. Redmi 1S (bricked after installing xposed installer)
2. Windows Computer
3. USB cable
2. An internet connections to download some files.
3. Patience
4. Brain
So, lets start -
At first download these files-
Xposed Disabler zip file-
http://www6.zippyshare.com/v/39722154/file.html
Fastboot files-
http://www27.zippyshare.com/v/94099837/file.html
USB Drivers-
http://pdanet.co/a/
TWRP 2.8.3.0 Recovery -
http://d-h.st/BTG
Now,
> Install the PDAnet driver package.
> Make a folder in desktop and name it "R1S"
> Then extract the fastboot.zip file in R1S folder,
> Put the TWRP img file in R1S also (Extract it, if it is in a zip file and take out the ".img" file and put it),
> Connect Redmi 1S to PC
> Press power button + volume down button until u see a Xiaomi bunny with "Fastboot" logo.
> Now go back to PC,
> Open the R1S folder
> Rename the TWRP to "recovery"
> Now, Press shift and right click simultaneously, then select "open command prompt here"
> Type -
fastboot flash recovery recovery.img
Press enter.
> After that, disconnect it from PC.
> Take out the sd card from it and connect to computer via card reader, and copy the xposed Disabler.zip to sd card.
> Put it back to Redmi 1S
> Now, Press power button + volume up button for 15secs
> You will see the TWRP logo,
> Then select "Install" from the menu.
> Now browse and select the xposed disabler.zip file you've copied just before,
> swipe to confirm,
> Reboot.
> Hit the "like" button if it helped.
Enjoy :sly: :sly:
And don't install xposed installer again. Install WSM tools instead of xposed.
NB:- this tutorial will void your warranty, So if you want to regain warranty, just download the stock "MI recovery.img" and flash it. (Same method, like TWRP flashing)
Sent from my HM 1SW using XDA Premium 4 mobile app
great thanks
Thank You, This Worked.
If I had found this method sooner, I wouldn't had to waste 2hrs trying to flash my redmi1s with MIUI ROM and failing.
Thanks Again 'Arkaprovaz'.
For those who get the error "AdbWinApi.dll is missing" after typing this command, fastboot flash recovery recovery.img
Please, copy the "AdbWinApi.dll" file from the "AdbWinApi.rar" and paste it in the R1S folder which you had created previously. Now try executing the command. It shouldn't throw the error again.
thanks a lot man successfully recover my redmi 1s:good:
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY U
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY USB CABLE IT SAYS "usb device not recognized the last device you connected to this computer is malfunctioned and windows doesn't recognise it"
ABHIUSHA said:
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY USB CABLE IT SAYS "usb device not recognized the last device you connected to this computer is malfunctioned and windows doesn't recognise it"
Click to expand...
Click to collapse
reinstal usb driver may solved your problem
Does mean Xposed Tools will brick Redmi on any rom, like PAC, or just MIUI (which has WSM Tools, ofcourse)?
can I install xposed on mokee rom?
bagosbanget said:
can I install xposed on mokee rom?
Click to expand...
Click to collapse
I just installed on PAC with no problems. So, it should bricking only MIUI roms.
please help me
i am trying this method but when type in cmd mode fastboot is not recognized as an internal external command, operable program or batch file.
Thanks to all participants in this thread. I was about to lose my redmi 1s after installing Xposed tools when
this guide came to my help.
TY !
Thank you.I wiped internal storage and flashed stock recovery without realizing that my update.zip is gone.I also wiped system and everyhing before and without your tutorial with cmd I was lost because a phone with no os and just a stock recovery(which doesn't have mount option or anything similar) it's really bad.Thanks again !
thanx...
great ..
pc not recognising my device..
pc donot recognise my device what to do now.....
how to get it recognised....
how to install drivers...
Simplest way.
if you have installed Xposed, it shows that you are rooted and have a custom recovery too. In this case If you have custom recovery installed already you skip all the steps and just download XposedDisabler.zip and copy it to your SD card set it in your phone and flash it with any custom recovery and you are done.
Hope it helped.
Great Dude Thanks
cant able to unbrick my redmi 1s bricked with wsm tools ....
when i try command it shows " waiting for device" ....
any solution .... help me bro ....
ishanmakhija said:
when i try command it shows " waiting for device" ....
any solution .... help me bro ....
Click to expand...
Click to collapse
Install Device Driver properly
i followed all the steps of unbricking but not able to unbrick after Press power button + volume up button for 15secs step as not getting twrp logo can u resolve by giving any solution quickly by mailing to me @ [email protected] as quickly as possible
Bricked Redmi 1S Bricked.
Hi Friends,
I have bricked Redmi 1s by installing xposed framework.Also wiped cache, wiped user data and wiped all data.
Pls help me starting Redmi 1S.
Thanks in advance.
Prakash
Related
Hi,
I have couple of questions about micromax canvas A1.
1) What is the most effective and efficient way to root this phone.
2) Is there fully functioning(without any bug) CM11 developed for this phone. If yes, could anyone please share the link.
3) I have heard that these stuffs voids the warranty of the phone. How can I get back to warranty.
I am new to these thing and got confused after looking so may links. Can anyone please share the links which will help me for my 3 questions.
icooldude007 said:
Hi,
I have couple of questions about micromax canvas A1.
1) What is the most effective and efficient way to root this phone.
2) Is there fully functioning(without any bug) CM11 developed for this phone. If yes, could anyone please share the link.
3) I have heard that these stuffs voids the warranty of the phone. How can I get back to warranty.
I am new to these thing and got confused after looking so may links. Can anyone please share the links which will help me for my 3 questions.
Click to expand...
Click to collapse
Here are the answers:
1. Best way: http://forum.xda-developers.com/crossdevice-dev/android-one-general/tut-how-to-root-android-one-devices-t2928240
2. Yes, CM11 link: http://forum.xda-developers.com/crossdevice-dev/android-one-crossdevice-development-original-android-development/sproutdevelopment-cyanogenmod-11-alpha-t2897516
3. Rooting with step 1 doesn't void warranty. Step 2 (flashing) voids warranty.
To get back warranty when needed to go to service centre, unlock bootloader and completely format everything, download stock ROM and follow procedure from here: [Official][Stock][4.4.4] Mircromax Canvas A1
In SP Tools, remember to choose the option "Firmware Upgrade" instead of "Download All" to get back warranty.
Hope I helped you
Question about root, Unroot and custom rom installation
GokulNC said:
Here are the answers:
1. Best way: http://forum.xda-developers.com/crossdevice-dev/android-one-general/tut-how-to-root-android-one-devices-t2928240
2. Yes, CM11 link: http://forum.xda-developers.com/crossdevice-dev/android-one-crossdevice-development-original-android-development/sproutdevelopment-cyanogenmod-11-alpha-t2897516
3. Rooting with step 1 doesn't void warranty. Step 2 (flashing) voids warranty.
To get back warranty when needed to go to service centre, unlock bootloader and completely format everything, download stock ROM and follow procedure from here: [Official][Stock][4.4.4] Mircromax Canvas A1
In SP Tools, remember to choose the option "Firmware Upgrade" instead of "Download All" to get back warranty.
Hope I helped you
Click to expand...
Click to collapse
Thank you for your reply.
But these links are taking me to lots of other links and I am confused now. Isn't there a simpler way to achieve these.
Sorry, I am new to these things although once I have installed CM11 to my Xperia GO but it was much simpler.
icooldude007 said:
Thank you for your reply.
But these links are taking me to lots of other links and I am confused now. Isn't there a simpler way to achieve these.
Sorry, I am new to these things although once I have installed CM11 to my Xperia GO but it was much simpler.
Click to expand...
Click to collapse
Atleast try the rooting as in step 1. Those links are just download links.
OK. I'll tell you in short. Download and install these softwares: Minimal ADB and fastboot & AQ 4501Driver
Download this: twrp.img and place it in folder: C:\Program Files\Minimal ADB and Fastboot\
Download this: SuperSu, remove memory card from phone, connect it to PC via card reader and cut & paste this (.zip) file just inside Memory Card and put it back into phone.
Enable USB debugging in phone (Google if u dont know)
Connect phone to PC via USB cable and click on the "Minimal ADB and Fastboot" shortcut in desktop.
Type the following one by one:
Code:
adb devices
adb reboot bootloader
fastboot boot twrp.img
In your phone, wait for few seconds. Click on "Install ZIP". Browse to external_sd and select the file UPDATE-SuperSU-v2.40.zip (which you pasted)
If it asks for confirmation, just do it. That's all! Now reboot phone from there! Your phone is rooted.
Thanks...
GokulNC said:
Atleast try the rooting as in step 1. Those links are just download links.
OK. I'll tell you in short. Download and install these softwares: Minimal ADB and fastboot & AQ 4501Driver
Download this: recovery.img and place it in folder: C:\Program Files\Minimal ADB and Fastboot\
Download this: SuperSu, remove memory card from phone, connect it to PC via card reader and cut & paste this (.zip) file just inside Memory Card and put it back into phone.
Enable USB debugging in phone (Google if u dont know)
Connect phone to PC via USB cable and click on the "Minimal ADB and Fastboot" shortcut in desktop.
Type the following one by one:
Code:
adb devices
adb reboot bootloader
fastboot boot recovery.img
In your phone, wait for few seconds. Click on "Install ZIP". Browse to external_sd and select the file UPDATE-SuperSU-v2.40.zip (which you pasted)
If it asks for confirmation, just do it. That's all! Now reboot phone from there! Your phone is rooted. And I'm tired.
Click to expand...
Click to collapse
Thanks for your patience and reply...
GokulNC said:
Here are the answers:
1. Best way: http://forum.xda-developers.com/cro.../tut-how-to-root-android-one-devices-t2928240
2. Yes, CM11 link: http://forum.xda-developers.com/cro...routdevelopment-cyanogenmod-11-alpha-t2897516
3. Rooting with step 1 doesn't void warranty. Step 2 (flashing) voids warranty.
To get back warranty when needed to go to service centre, unlock bootloader and completely format everything, download stock ROM and follow procedure from here: [Official][Stock][4.4.4] Mircromax Canvas A1
In SP Tools, remember to choose the option "Firmware Upgrade" instead of "Download All" to get back warranty.
Hope I helped you
Click to expand...
Click to collapse
Can I install a cwm backup file without unlocking the boot loader ? As an Indonesian android one, android 5.1 cwm backup file is available to download, I'm thinking of installing it myself.
send from my canvas A1
issei007 said:
Can I install a cwm backup file without unlocking the boot loader ? As an Indonesian android one, android 5.1 cwm backup file is available to download, I'm thinking of installing it myself.
Click to expand...
Click to collapse
Yes you can. First boot up the CWM recovery from fastboot mode using the command
Code:
fastboot boot recovery_name.img
(I'd recommend Philz Recovery)
First, take a backup of your present ROM from Backup and Restore menu-> Backup to external_SD (so that if things go wrong, you can come back to present ROM)
From now on, you can adopt this procedure: http://youtube.com/watch?v=H4JJu0igXmU
(What the video says is
1. Wipe the system and boot partition
2. Place the extracted Lollipop Nandroid in clockworkmod/backup of memory card from computer using card reader and put it back in phone.
3. Restore this Lollipop Nandroid from recovery.)
Anyway, within a few days, we'll be getting the 5.1 update in India. Why so hurry to see Lollipop??
GokulNC said:
Yes you can. First boot up the CWM recovery from fastboot mode using the command
Code:
fastboot boot recovery_name.img
(I'd recommend Philz Recovery)
First, take a backup of your present ROM from Backup and Restore menu-> Backup to external_SD (so that if things go wrong, you can come back to present ROM)
From now on, you can adopt this procedure: http://youtube.com/watch?v=H4JJu0igXmU
(What the video says is
1. Wipe the system and boot partition
2. Place the extracted Lollipop Nandroid in clockworkmod/backup of memory card from computer using card reader and put it back in phone.
3. Restore this Lollipop from recovery.)
Anyway, within a few days, we'll be getting the 5.1 update in India. Why so hurry to see Lollipop??
Click to expand...
Click to collapse
Lol, no hurry just disgusted by the support of Google and of course can't wait, I bought this phone on a sole purpose of getting fast updates, and did a mistake by choosing this over moto G2. BTW thanks for the reply. I'm trying root for the first time, by your instructions.
send from my canvas A1
GokulNC said:
Atleast try the rooting as in step 1. Those links are just download links.
OK. I'll tell you in short. Download and install these softwares: Minimal ADB and fastboot & AQ 4501Driver
Download this: twrp.img and place it in folder: C:\Program Files\Minimal ADB and Fastboot\
Download this: SuperSu, remove memory card from phone, connect it to PC via card reader and cut & paste this (.zip) file just inside Memory Card and put it back into phone.
Enable USB debugging in phone (Google if u dont know)
Connect phone to PC via USB cable and click on the "Minimal ADB and Fastboot" shortcut in desktop.
Type the following one by one:
Code:
adb devices
adb reboot bootloader
fastboot boot twrp.img
In your phone, wait for few seconds. Click on "Install ZIP". Browse to external_sd and select the file UPDATE-SuperSU-v2.40.zip (which you pasted)
If it asks for confirmation, just do it. That's all! Now reboot phone from there! Your phone is rooted. And I'm tired.
Click to expand...
Click to collapse
In the adb command box whenever I'm typing " adb reboot bootloader"the reply is "device not found". What to do
send from my canvas A1
issei007 said:
In the adb command box whenever I'm typing " adb reboot bootloader"the reply is "device not found". What to do?
Click to expand...
Click to collapse
Did u enable USB debugging in phone and install phone drivers in computer??
If u r sure about this, try this:
Code:
adb devices
If u see a serial number listed in " Devices connected", then it means ur phone is properly configured for ADB.
GokulNC said:
Did u enable USB debugging in phone and install phone drivers in computer??
If u r sure about this, try this:
Code:
adb devices
If u see a serial number listed in " Devices connected", then it means ur phone is properly configured for ADB.
Click to expand...
Click to collapse
Yeah debugging was on and my phone was in fastboot mode. I put the command "adb devices" the reply was "device connected successfully>list of devices connected" and then nothing. When putting the command "adb boot recovery.img" the reply was "waiting for devices" and no nothing happened. Tried this 4 times, did exactly as the video from the XDA root for micromax canvas a1 forum says.
send from my canvas A1
I my problem was with the drivers. I didn't installed the USB driver. Trying again after installing the driver.
send from my canvas A1
Hi.
Well as i said in my last topic,My tablet went on a auto rotation and etc.
http://forum.xda-developers.com/fonepad-7/help/stuck-boot-screen-fonepad-7-k012-t3267240
Selected recovery,Gave me an error.
So,Now i used a Jellybean firmware on Asus site.
Used those delete userdata and cache and system and etc.
Then loaded those 3 img files,It worked fine in droidbot.
But when i choosed recovery,It gave me an error after some seconds(Around 20 sec)
Well,Then i thought maybe i should use kitkat,So i download its firmware on Asus site.
Done those steps,Used SD update,It gave me same error again.
What should i do now dudes?
Please someone help me its URGENT! :crying: :crying:
P.S:Errors i told,I meant that andriod guy resting with a red attention...
Steps i have done already:
Used With/Without Wipe data button,Then used fastboot erase system and fastboot erase userdata and fastboot erase cache
Then load splashscreen and etc.
With both JB-KK firmwares.
I renamed firmwares to k012_sdupdate.zip and put it in an external SD.
Any way to save me? :/
---------------
IFWI VERSION:64.25
DROIDBOT:10.32.1.22.1
NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
Hello,
Hey all if u have newly rooted your xiaomi redmi 1s or want to root it and u have any questions about the roms or stock miui queries post here
Thanks.
HELP!! Cannot root my Redmi 1S
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?
I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.
dxsyrz said:
I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.
Click to expand...
Click to collapse
There won't be any sdcard bro!! You have formatted the sd card as adaptive storage i.e., your sdcard is now a part of android system. So twrp will not show your sdcard anymore.
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
sonjamin said:
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?
Click to expand...
Click to collapse
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app
manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my post dude
Sent from my CP8298_I00 using XDA-Developers mobile app
Msf107252 said:
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my quote bro
Sent from my CP8298_I00 using XDA-Developers mobile app
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Followed everything, but not able to install recovery
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery
Where should i enter fastboot -w ???
Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Ubd debugging not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it
Thanks , My device is X500. Can i flash it?
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file
phone is dead after flash model x509
nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone
mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays
Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}
Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!
NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition90
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls
Don't know if anyone can help me. I ran the update ending in MF-PV and used DC-unlocker to update from DUK-L09C432B189.
Ended up in a bootloop and tried flashing back to Nougat. Phone continued to bootloop a few times then shutdown and now it won't power on at all.
Tried charging it and it doesn't seem to charge either; that is the LED doesn't come on.
Is there any hope for my Honor 8 Pro???
blankulus said:
Don't know if anyone can help me. I ran the update ending in MF-PV and used DC-unlocker to update from DUK-L09C432B189.
Ended up in a bootloop and tried flashing back to Nougat. Phone continued to bootloop a few times then shutdown and now it won't power on at all.
Tried charging it and it doesn't seem to charge either; that is the LED doesn't come on.
Is there any hope for my Honor 8 Pro???
Click to expand...
Click to collapse
1. Unlock bootloader
Get unlock code , ..
Login with your huawei account and fill required details , you will instantly get unlock code.
Select MTP mode then, enable USB debugging. (Download ADB USB driver )
i. adb reboot bootloader
ii fastboot oem unlock XXXXXXXXXXXXXXXX
All data will be erased. take backup before applying.
2. After bootloader unlock, again go to fastboot mode by command "adb reboot bootloader".
If OS running is noughat flash twrp recovery of noughat to honor 8 pro.
fastboot flash recovery twrp-3.1.1-1-duk.img
3. boot into twrp recovery, below is command.
adb reboot recovery
4. Using PC/Laptop copy below update files to USB pen drive (USB filesystem exfat/fat32 needed. NTFS will not work)
Get Links by Google search:-
DUK_FullOTA_ROM_flasher.zip
DUK-RECOVERY_RAMDISK_NoCheck.img
DUK-RECOVERY2-NoCheck.img
DUK-RECOVERY-NoCheck.img
update.zip
update_data_full_public.zip
update_full_DUK-L09I_hw_in.zip
5. Attach USB Pendrive with OTG cable to phone..
Select storage -> USB
6. Install zip -> select "DUK_FullOTA_ROM_flasher.zip"
THis will copy all update*.zip files from USB drive to "Phone internal memory"
also it will replace twrp recovery with "nocheck-stock" recovery. then it will reboot.
7. On reboot EMUI update will start..
8. Enjoy Oreo with your favourite Tea/Coffe.
kashyapnirma said:
1. Unlock bootloader
Get unlock code , ..
Login with your huawei account and fill required details , you will instantly get unlock code.
Select MTP mode then, enable USB debugging. (Download ADB USB driver )
i. adb reboot bootloader
ii fastboot oem unlock XXXXXXXXXXXXXXXX
All data will be erased. take backup before applying.
2. After bootloader unlock, again go to fastboot mode by command "adb reboot bootloader".
If OS running is noughat flash twrp recovery of noughat to honor 8 pro.
fastboot flash recovery twrp-3.1.1-1-duk.img
3. boot into twrp recovery, below is command.
adb reboot recovery
4. Using PC/Laptop copy below update files to USB pen drive (USB filesystem exfat/fat32 needed. NTFS will not work)
Get Links by Google search:-
DUK_FullOTA_ROM_flasher.zip
DUK-RECOVERY_RAMDISK_NoCheck.img
DUK-RECOVERY2-NoCheck.img
DUK-RECOVERY-NoCheck.img
update.zip
update_data_full_public.zip
update_full_DUK-L09I_hw_in.zip
5. Attach USB Pendrive with OTG cable to phone..
Select storage -> USB
6. Install zip -> select "DUK_FullOTA_ROM_flasher.zip"
THis will copy all update*.zip files from USB drive to "Phone internal memory"
also it will replace twrp recovery with "nocheck-stock" recovery. then it will reboot.
7. On reboot EMUI update will start..
8. Enjoy Oreo with your favourite Tea/Coffe.
Click to expand...
Click to collapse
The phone will not turn on so 8 can't do all of that
pretty much the same here...Running out of options I think
blankulus said:
Don't know if anyone can help me. I ran the update ending in MF-PV and used DC-unlocker to update from DUK-L09C432B189.
Ended up in a bootloop and tried flashing back to Nougat. Phone continued to bootloop a few times then shutdown and now it won't power on at all.
Tried charging it and it doesn't seem to charge either; that is the LED doesn't come on.
Is there any hope for my Honor 8 Pro???
Click to expand...
Click to collapse
Try different button combinations, with usb/charging cable connected and disconnected. If the phone still doesn't show any kind of screen then the service center is your final option.
Try flashing with usb and huawei flashing tools
blankulus said:
The phone will not turn on so 8 can't do all of that
Click to expand...
Click to collapse
Please connect phone with usb and notice device manager.. If it blinks then there is hope to flash it via huawei flashing tools like sp flash tool in micromax...
kashyapnirma said:
Please connect phone with usb and notice device manager.. If it blinks then there is hope to flash it via huawei flashing tools like sp flash tool in micromax...
Click to expand...
Click to collapse
Looks as if it's good bye Honor 8 Pro for me. Computer doesn't see the phone so I can do nothing to try to fix it.
Doesn't power on and doesn't seem to charge:crying::crying::crying: