I just wrote this this morning and finished testing in my phone. All is working fantastic!
This mod is to bring back the Lens Flare Effect.
Here are just a few previews and the rest are viewed from the installer in the update coming soon.
AURORA
FIRESTORM
LIGHTNING
METEOR
STARGATE
SOLAR SYSTEM
BLOOD SPATTERED HANDPRINT
BLAZED
METALGEARS
INFERNO
I have included 11 different choices all installed via Aroma Installer from custom recovery of your choice (I used TWRP). This mod does require that your rom has "init.d" support as this does need a script called at every boot to work. AGAIN CALLS SCRIPT UPON EVERY REBOOT. The script depending on each phone should take longer than 30-45 seconds. Basically flash the mod reboot and the next time you turn on the phone the effect will be active.
DOWNLOAD FLARE_LOCKSCREEN_v1
Instructions for installation -
*Make a NANDROID ALWAYS AND OFTEN when modding your system!
*ROM that supports init.d script
*download and check md5 is good
*reboot to recovery and flash the zip file
*pick the effect you want (sorry I don't have the previews for the installer set up yet)
*reboot and let the script work it's magic and by time you turn your phone back on a surprise will be waving at you.
*hit the thanks button
Feedback?
Just looking for a little feedback as far as working or not? It's hard for me to tell what will work and won't work for everyone sometimes due the fact I am always testing a very heavily modded rom. I went back to Stock and started fresh with this so I'm thinking it should work for all its pretty much a script mod with only a less than 10 images. Only stip is your rom must support init.d, which most custom roms do these days. So let me know. This will also be in the Missing Link update which will include previews.
OP now has previews
Here are just a few so you get an idea of what this offers.
w
Dude you are tearing it up! Gonna backup and then I'll test. Will report shortly.
OK. Sorry for the delay. Had to make some adjustments but its working now. I have a note 3 running sacs moar rom. I had to update my sqlite3 in xbin and i was missing lib file libncurses.so. so may want to add that to your download script in aroma. Also had to change perms on the intd file keygaurdset from rwrr to rwxr-xr-x. Think the biggest issue for me was the sqlite3. Not sure if the initd perms are part of it. Ive read different opinions about setting those (0644 vs. 0755) Have only tested lightning effect and changed ripple effect to light effect in lockscreen settings. Hope that helps. Keep up the inctedible work. Really think you're onto something with the aroma themer. Size is the only limitation but for what it does its worth it. Great work!
DevilDog512 said:
OK. Sorry for the delay. Had to make some adjustments but its working now. I have a note 3 running sacs moar rom. I had to update my sqlite3 in xbin and i was missing lib file libncurses.so. so may want to add that to your download script in aroma. Also had to change perms on the intd file keygaurdset from rwrr to rwxr-xr-x. Think the biggest issue for me was the sqlite3. Not sure if the initd perms are part of it. Ive read different opinions about setting those (0644 vs. 0755) Have only tested lightning effect and changed ripple effect to light effect in lockscreen settings. Hope that helps. Keep up the inctedible work. Really think you're onto something with the aroma themer. Size is the only limitation but for what it does its worth it. Great work!
Click to expand...
Click to collapse
This is by far one of the most helpful feedback replies I have received! Thank you and if you see anything else or have any suggestions I'm always listening. About the sqlite3, the one included in the zip needed to be updated?
stangdriver44 said:
This is by far one of the most helpful feedback replies I have received! Thank you and if you see anything else or have any suggestions I'm always listening. About the sqlite3, the one included in the zip needed to be updated?
Click to expand...
Click to collapse
Well i have an installer that does both sqlite3 and the lib file. So yours may be ok. I made a backup of yours and will test it now. Going thru the effects to see which are working. I'll report back directly.
---------- Post added at 01:33 AM ---------- Previous post was at 01:13 AM ----------
Your sqlite3 is good. So far lightning, solar, and metalgear all work. Ill test them all but so far so good. Thanks for your hard work and im happy to test out anything you have. Ive been meaning to fix a few things on the aroma theme installer for us sprint guys (Forgot to mention its sprint note 3 earlier) just havent had time to do much. From what i understand the dialer themes are in teleservices so hopefully its a simple matter of changing the folder name. That would be sweet. Ill look into it unless you already have the fixes and just waiting to update. Ive only used the system mod and spinners switches and toggles and boot/shut animations but everything ive tried has worked. Signals too.
All options work great! Excellent work and thank you again for it.
Not working for MOAR, or how to?
HD-man said:
Not working for MOAR, or how to?
Click to expand...
Click to collapse
Not show why it isn't working. The mod requires init.d script on boot. So you have to give I little bit, no longer than a minute I would say. You have to unlock the device and by next time it should be showing the effect you picked.
Can anyone confirm this working on Moar?
Works with MetalROM
Works great. Had to change "Unlock Effect" in lockscreen settings to "Light Effect" to get it to work (had it set to ripple effect.) Went through other options, definitely has to be set to light effect for the custom effect to show.
Thanks for this, the blood spatter works great with my deadpool theme!
Wow man..pretty awesome! On a sprint note 3 MOAR port as well and am using the bloody hand splatter for halloween..awesome job!!
gdrocks said:
Works great. Had to change "Unlock Effect" in lockscreen settings to "Light Effect" to get it to work (had it set to ripple effect.) Went through other options, definitely has to be set to light effect for the custom effect to show.
Thanks for this, the blood spatter works great with my deadpool theme!
Click to expand...
Click to collapse
Glad you got it figured out. I will update the OP with that info. So you guys have the option for light effect?
Don't seem to have those nice options over here in Tmo. I'm sure with rompit and TD working things you guys probably have all the options plus some made up ones!!
The mod is "supposed" to change the settings on boot. So it is only partially working it sounds like. When you reboot, do you have to adjust the setting again, or does it stay?
On reboot it changes to "None"
Attached screenshots of settings screen.
gdrocks said:
On reboot it changes to "None"
Attached screenshots of settings screen.
Click to expand...
Click to collapse
Wow! You have some options it looks like. Must be running Moar? Anyways, change lockscreen to light effect then with whatever file manager go to system/etc/init.d and delete the keyguardset file. Reboot and should be good
Using MetalROM 2.2
Deleted the file, still reverting to "None" on reboot.
gdrocks said:
Using MetalROM 2.2
Deleted the file, still reverting to "None" on reboot.
Click to expand...
Click to collapse
I'm guess I still have a few links to work out to make this more universally compatible. Sorry for the hassle. Take a look at this post and see if that helps. It's the manual way of setting it. If you are really wanting it and can't get it going, send me your settings.db the location is found in that post
I guess it helps to have the link huh? http://forum.xda-developers.com/showpost.php?p=56312291&postcount=7
Made the change, but it didn't stick. What should the permissions be?
File says invalid file when I try to attach settings.db
https://docs.google.com/file/d/0B3pOdO0qCf2heHJOaXF4Y21DRU0/edit?usp=docslist_api
gdrocks said:
Made the change, but it didn't stick. What should the permissions be?
File says invalid file when I try to attach settings.db
https://docs.google.com/file/d/0B3pOdO0qCf2heHJOaXF4Y21DRU0/edit?usp=docslist_api
Click to expand...
Click to collapse
Remove the .txt from the file attached and replace the file you currently have. I made only the change for the lockscreen effect. Mine shows permissions set to rw-rw----
Are you using v1.1a? Recommend using that first
DOWNLOAD FLARE_LOCKSCREENv1.1a
@stangdriver44, where is this located in missing link installer? Would like to give it a try. They look very cool! I'm on S5 MOAR - am a little confused after reading through thread. Do I have to do anything extra to enable?
Related
Hello, I have seen few themes around, but in every single one of them, I've been missing something. Tiny uneccessary things and details.
So I have created theme to my liking. rom-g's baterry mod with some icons from R64's theme, and few other icons made by me or taken from some other template. Just theme I think of as special one :-D
Maybe you may want something more then stock AOSP lockscreen and stock notification bar.
Take look here:
If you've found theese picture nice, then you may be willing to use another zip install.
JPU Version
Copy DeepBlueTheme_By_Virnik.zip file to your internal SD card, and install via CWM.
JPX/JPY Version
DeepBlueTheme_JPY_By_Virnik_v0.8.zip
PS: That one smilie left behind unthemed has been already fixed in the actual version
PS: If somebody knows how to make extended Power Menu, and is willing to help, I will welcome such help - Let me know. I have tried it myself, but I have messed it up somewhere, so it didn't worked.
Nice... going to try now.
i'll give it a try too, it looks really nice.
edit: just curious though, would it break the extended power menu, that i have with darkyy's rom/theme?
FuryriderX said:
i'll give it a try too, it looks really nice.
edit: just curious though, would it break the extended power menu, that i have with darkyy's rom/theme?
Click to expand...
Click to collapse
yes, propably. Once I learn how to create extended menu myself, I will fix this issue
realy ,very nice job bro,
pls insert extended power menu to flash it
10ks
hensk said:
realy ,very nice job bro,
pls insert extended power menu to flash it
10ks
Click to expand...
Click to collapse
I would like to, but I don't know how...at least now. I will try to figure this out during the day
Virnik0 said:
I would like to, but I don't know how...at least now. I will try to figure this out during the day
Click to expand...
Click to collapse
Have you tried this guide mate?
http://forum.xda-developers.com/showpost.php?p=8674580&postcount=1
vypada to super
loks great
Hmm..
My phone doesn't start after installing this theme, have to wipe before it works again. I'm on Doc's ROM, JPU 4.0.
AshVash90 said:
My phone doesn't start after installing this theme, have to wipe before it works again. I'm on Doc's ROM, JPU 4.0.
Click to expand...
Click to collapse
Did you have any lagfix or tweaks enabled? Disable both and try again. If problem persists download a fresh copy of the file and reflash
panoramixxx said:
vypada to super
loks great
Click to expand...
Click to collapse
To jsem rád, že se Ti líbí
I'm glad you like it
AshVash90 said:
My phone doesn't start after installing this theme, have to wipe before it works again. I'm on Doc's ROM, JPU 4.0.
Click to expand...
Click to collapse
Strange. I am running stock JPU with CF-Root and Voodoo lagfix, and all is working right.
BTW, I have done Purple version of the theme for my wife. Somebody interested?
Sent from my GT-I9000 using XDA App
First post updated with updated version of the theme
I am still unable to recompila apk, after changes regarding progress bar (I am using blue one from R64's theme now), and still unable to create reboot menu. It seems that apk tool have some problems with my 64b windows. I will try with linux later this week.
If somebody is willing to modify theme to add ex. power menu, let me know please. Because right now, I am helpless.
EDIT: Updated again. Added few modded apps, changed some icons, and such.
please can you reupload file for jpy?
This is now included in my MoDaCo Custom ROM for the Galaxy Nexus - details.
Here's something i'm testing on my GN that I thought i'd share. I personally find the auto backlight levels a bit low, so i've tweaked them a bit. This is very much in TEST phase, let me know how you find it and if it improves things for you. This is for expert users only at this stage, install via ClockworkMod recovery.
This is tested on devices running the ITL41D / ITL41F ROMs.
Update: There is now 2 different files with 2 steps of brightness increase!
r4 step 1 - DOWNLOAD - MD5: a4273828ee6362c647d62c84dc699ebf
r4 step 2 - DOWNLOAD - MD5: 6aeb69ca7590c1120d6d3c183278540c
P
Paul , your putting in work so far man .
Great stuff, after going from my SGS2 to the Nexus I couldn't believe the difference in brightness profiles. Thanks Paul!
What have you used instead of /sdcard/ since that doesn't exist
Thanks - works with a noticeable improvement for me.
Ok I seem to be getting some errors here I can't figure out.
I've rooted using Pauls Superboot, however when I try to backup the framework.apk to sdcard I get No such file or directory.
If I just pull it to my pc and rename it and push it works fine.
Then when I try to remount I get
mount: Operation not permitted
Anyone got any ideas?
Evostance said:
Ok I seem to be getting some errors here I can't figure out.
I've rooted using Pauls Superboot, however when I try to backup the framework.apk to sdcard I get No such file or directory.
If I just pull it to my pc and rename it and push it works fine.
Then when I try to remount I get
mount: Operation not permitted
Anyone got any ideas?
Click to expand...
Click to collapse
Are you in su?
Might be a daft question, I know
Shodney said:
Are you in su?
Might be a daft question, I know
Click to expand...
Click to collapse
When I type su it's asks for a password. Any ideas?
Sent from my iPad 2 using Tapatalk
Now that we have a working CWM can this be made into a flashable zip?
This is now in clockworkmod update zip format.
P
paulobrien said:
This is now in clockworkmod update zip format.
P
Click to expand...
Click to collapse
Yes! flashed, will test differences when is charged
This looks really nice, will flash it in a bit.
How do I restore the back light settings to default if I don't like it?
Have made a cwm backup but a default flash able zip would be much easier.
Really appreciate having well respected devs putting in all this work so soon after release.
Sent from my Galaxy Nexus using XDA App
paulobrien said:
This is now in clockworkmod update zip format.
P
Click to expand...
Click to collapse
Paul, this does not help with the auto screen power adjustment issue does it?
If I have auto brightness off already, this would do nothing for me right?
Kev
kevwright said:
Paul, this does not help with the auto screen power adjustment issue does it?
If I have auto brightness off already, this would do nothing for me right?
Kev
Click to expand...
Click to collapse
This is only relevant if you are using auto brightness.
P
PS: Paul I have diffed your autobright patch to stock - and there are no changes I can see. I confirmed with he_stheone64 and we both cannot find any changes, certainly not in arrays.xml
Maybe forgot to copy the file before compile in the house-moving rush?
any tutorial?
Thyrus said:
PS: Paul I have diffed your autobright patch to stock - and there are no changes I can see. I confirmed with he_stheone64 and we both cannot find any changes, certainly not in arrays.xml
Click to expand...
Click to collapse
I can confirm this. I noticed that there is no visible change compared to stock and took a look myself.
Paul, until you have re-inserted into your MCR, is it safe to use the standalone patch with MCR v4?
BigBlue007 said:
I can confirm this. I noticed that there is no visible change compared to stock and took a look myself.
Paul, until you have re-inserted into your MCR, is it safe to use the standalone patch with MCR v4?
Click to expand...
Click to collapse
Huh, weird! I'll look into it, maybe I uploaded the wrong file?!?!
Standalone patch should work with MCR.
P
Has this been fixed or confirmed as working? I'd love for the base auto-brightness level to be the same as the minimum selectable brightness level. That would fix the majorty of the banding evident.
Is anyone else noticing that their brightness doesn't change at all when using the auto feature? Maybe a sensor in my thing is broken or unresponsive; does anyone know an app or test that can check if the sensor(s) is functioning correctly? :x
Hi everyone,
----Attention to anyone on CM9 wanting to use this package-----
The zip seems to be causing some trouble with CM9 and some users have reported having boot loops after flashing (only on CM9)
If you are on CM9 and want to use the package please push the files across manually to where they need to be.
eg. /system/app and /system/etc read page 2 of this thread for detailed instructions.
**************Update 08/06/2012**************************
Another new update v1.2.1
fixed CWM package file...
added some permission xmls from touchwiz roms, and some libs etc. Hopefully will fix the problems some have been having again with the package.
Link updated below in downloads.
**********
Sorry to those of you who are on a CM based rom who weren't able to get the zip to work, I've updated the zip so it should work on CM, I am unable to test as I'm not on a CM rom so can someone please check it for me and let me know? Thanks.
Download link updated below.
ps. 100 downloads in less than a day!
***********************************************
I like many others have been working hard to port the SGS3's lovely widgets, but like everyone else, I haven't had any real luck ripping them, it seems samsung worked hard to make these ONLY available on the SGS3, but I guess it is just a matter of time until someone is able to port them.... hopefully
Until that time, I decided the next best thing would be to use the SGS2's ported accuweather widget and theme it with the nice images from the SGS3 widget
The background image is semi-transparent and changes depending on daytime/night time/cloudy weather
Have a look at screenshots
Daytime -
Night time -
Cloudy -
Installation
Copy zip file to phone
Then reboot into CWM and flash this file.
Clear dalvik cache
Reboot and enjoy
**If you already have either the digital clock widget or the sgs2 accuweather widgets installed, I would suggest to do a backup with titanium (just in case you want to revert to your old one) and then uninstall them**
Download
http://www.mediafire.com/download.php?r90ug8t219kd5sk
If you are happy with the app please hit the thanks button
And if you are really really happy feel free to buy me a beer / donate
In the zip, there is also a digital clock widget, with the number images from the SGS3 ported over too
IT doesnt work..
Sent from my GT-I9000 using XDA
santosxen said:
IT doesnt work..
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
1st post! welcome to XDA.
Can you tell me which rom are you using, maybe you can try to manually put the files in /system/app and set permissions to 0 , 0 then r-w, r, r,
Did the install with CWM say it was sucessful or not?
xxx posts, still does not work..
Cyanogenmod 9, also setted permissions..
Try here dude,it's a GSIII's weather widget and it works on my GS
http://forum.xda-developers.com/showthread.php?t=1689520
Hi OP, sorry I haven't posted sooner, but it works fine.
Manually copied the two apk with rootexplorer + perms + reboot
Btw, I use Nova Launcher.
Thanks !
work`s on jw4?
saphirrot said:
xxx posts, still does not work..
Cyanogenmod 9, also setted permissions..
Click to expand...
Click to collapse
Haha! I wasn't implying that it wasn't working for santosxen because he has only made one post! that just silly!
I was only welcoming him to this great forum full of helpful people!
I forgot to mention after setting the permissions correctly (to 0 , 0 then r-w, r, r,) that you need to reboot and then it will work.
filou75 said:
Hi OP, sorry I haven't posted sooner, but it works fine.
Manually copied the two apk with rootexplorer + perms + reboot
Btw, I use Nova Launcher.
Thanks !
Click to expand...
Click to collapse
Excellent, thanks for the feedback! It is working fine on Apex launcher too.
norocosul3 said:
work`s on jw4?
Click to expand...
Click to collapse
Yes it should work fine on JW4.
However as you are on a Touchwiz based rom you might be able to get the real sgs3 widget to work from Twics latest 1.5.1 update see here it is a big pack which adds on a lot of content to your phone and changes icons etc. if you dont want all that stuff I can edit his CWM package if you want so it just includes the widgets...
Here is the link, http://www.mediafire.com/download.php?4dwy7yvy5ekhj7i
I edited out all the other stuff and you just have the new touchwiz launcher and the sgs3 widgets. Just put the file on your phone and flash with CWM, I can't guarantee it will work, but if you are on a samsung rom your chances are better than the rest of us I think, let me know how it goes.
New zip added to OP for those of you who are using CM roms, sorry the last zip seems to have only worked for some people, this one should work for everyone fingers crossed.
Haha! I wasn't implying that it wasn't working for santosxen because he has only made one post! that just silly!
I was only welcoming him to this great forum full of helpful people!
I forgot to mention after setting the permissions correctly (to 0 , 0 then r-w, r, r,) that you need to reboot and then it will work.
Click to expand...
Click to collapse
doesnt meant it bad too bro, but it still does not work. Please try your mod with this launcher :
http://forum.xda-developers.com/showthread.php?t=1571527
It wont work :/
sorry it's not working for you
thanks for the heads up with this link, I'll try it out
Yeah but... Touchwiz is... just touchwiz ^^'
It's atm not working for me too. I manually copied these two .apk Files to the /system/app Folder. After that i have wanted to change the permissions but i guess i failed that way...the permissions seem to be basically accurate... Help me guys please
I have just updated the file in the OP, version 1.2
now includes added touchwiz permission xml files and some lib files to system.
Hopefully with these added files it will work for everyone.
Let me know if it works
santosxen said:
It's atm not working for me too. I manually copied these two .apk Files to the /system/app Folder. After that i have wanted to change the permissions but i guess i failed that way...the permissions seem to be basically accurate... Help me guys please
Click to expand...
Click to collapse
I use an app from the market called 'super manager' download that and go into the 4th tab to the file manager, once you are in the file manager choose 'back up level folder' up the top of the list, choose this until it takes you back to / (which is root) up the top you should see '/ (r/o)' then go to system, (when going into system it will ask you if you want to modify the file system, it will give you three options 1. do nothing 2. read only, and 3. r/w choose R/W. Now you are in the system folder of your phone, but be careful here because if you change something without knowing what you are doing you could have big problems.. ok now go into app folder and find your file, it will be near the bottom, it is called accuweather.com and under that it will say 'samsungwidget_weatherclock.apk'.
Once you have found the file choose the tick box next to it, now down the bottom of the screen you will see a list of icons; home, copy, cut, paste etc. now slide across to the right and you will see 'attribute' the icon has 777 on it.
Ok now where it says owner: set this number to 0
and where it says group: set this number to 0 as well.
under that you will have your permissions.
you can set owner to read, write, and execute
you can set group to read, write, and execute as well
and you can set other to read, write, and execute as well
it will also work if you just have owner as r-w-- group as r---- and other as r---- but try the above settings first to see if that works for you.
Now you just have to reboot and your widget should install properly
I will assume that you are on a rooted rom though?
And please try the new version 1.2 in the opening post too
Let me know if you have any troubles
1.2 doesnt work -> signature verification failed
Sent from my GT-I9000 using XDA
I fixed the permissions, still wont work: (
Sent from my GT-I9000 using XDA
Sorry about that... new link uploaded....
v1.2.1
this time I tested it and it is working for me (sorry I didn't test that last one v1.2, must have been a problem with the zip file)
1.2.1 -> sugnature verification failed
Sent from my GT-I9000 using XDA
santosxen said:
1.2.1 -> sugnature verification failed
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
You don't need a signed zip if you use a cwm recovery
Witch kernel do you have on your gs ?
[MOD] Dialer Water Droplet Sound Hack! Deodexed & Odexed - CWM All In One! [11-24-12]
[MOD] Get Rid Of That Annoying Dialer Water Droplet Sound!
Ever want to get rid of that "water droplet" Sound
When you dial The Phone? Well Now You Can!
This Hack Changes It To A Normal Sounding Dialer Beep!
Now Works With All Modded and Non-Modded Files!
Should Work With Any Deodexed or Odexed Files Too!
You Need ..
1. A Jellybean T999UVDLJA Rom
2. Rooted !
CWM Install Link - ALL IN ONE!: Get Beep-Hack Now!
-----------------------------------------------------------------
IF THINGS GO HORRIBLY WRONG ..
1. DON'T PANIC
2. RESTORE USING YOUR CWM OR TWRP BACKUP !
-----------------------------------------------------------------
Installation:
1. BACKUP - BACKUP - BACKUP
For God's Sake .. Do a CWM OR TWRP - BACKUP FIRST!
2. Install In CWM or TWRP In Recovery
3. Wait A Few Seconds.. Reboot!
4. ENJOY!
Anyway to just make a flashable zip? I have a Mac and no windows partition at the moment.
Sent from my Samsung Galaxy S3 via Tapatalk
I changed mine to a sound clip that says "ouch"
What exactly does it modify?
I'd like to include it in a ROM release, credits to you of course, but I'm curious what it alters...
uoY_redruM said:
What exactly does it modify?
I'd like to include it in a ROM release, credits to you of course, but I'm curious what it alters...
Click to expand...
Click to collapse
it alters the sound file in /system/media/UI/
believe it's an .ogg file, all the UI sounds for your device are found in there, you can modify/cut mp3's, convert them, then name them the same as the the one you are trying to replace and there you have it, a new UI sound for the same function.
cobraboy85 said:
it alters the sound file in /system/media/UI/
believe it's an .ogg file, all the UI sounds for your device are found in there, you can modify/cut mp3's, convert them, then name them the same as the the one you are trying to replace and there you have it, a new UI sound for the same function.
Click to expand...
Click to collapse
Nope .. it is the seccontacts.apk that sound comes from ..
None of the /system/media/UI sounds is for the keypad sound
That would be to easy ...
WarlockW said:
Nope .. it is the seccontacts.apk that sound comes from ..
None of the /system/media/UI sounds id for the keypad sound
That would be to easy ...
Click to expand...
Click to collapse
^yeah, this.
Trust me, I tried everything to remove that crap on my old releases. I had a feelign it was in Sec_Contacts.
Why not make the change a flashable zip instead? If its just for UVDLJA, it'd be much more simple to release the modified Sec_Contacts, would it not?
uoY_redruM said:
^yeah, this.
Trust me, I tried everything to remove that crap on my old releases. I had a feelign it was in Sec_Contacts.
Why not make the change a flashable zip instead? If its just for UVDLJA, it'd be much more simple to release the modified Sec_Contacts, would it not?
Click to expand...
Click to collapse
Well this does the same thing .. just uses adb
It replaces the apk sets permissions and reboots phone.
So I guess both would be ok. This way is more fun!
WarlockW said:
Well this does the same thing .. just uses adb
It replaces the apk sets permissions and reboots phone.
So I guess both would be ok. This way is more fun!
Click to expand...
Click to collapse
haha, yeah, I just ran it and saw how it worked.
Regardless of the method, thank you for the work!
Well I stand corrected... I guess that makes sense that the app itself would have its own sounds included within the apk... just like any other app!
0_o
By the way, didn't work for me (stock JB). It replaced SecContacts but it was no longer present in the drawer and trying to install it via rootexplorer only failed.
uoY_redruM said:
By the way, didn't work for me (stock JB). It replaced SecContacts but it was no longer present in the drawer and trying to install it via rootexplorer only failed.
Click to expand...
Click to collapse
Is the rom : Odexed ? Should work
WarlockW said:
Is the rom : Odexed ? Should work
Click to expand...
Click to collapse
Pretty sure its deodexed. Many of us wont be able to use this because we are using custom roms.
I know you can reodex, but im betting most wont bother with new releases every day.
If I may, id suggest making a deodexed flashable that the devs can use in their roms. If they apply any mods to the contacts app, and then someone flashes your mod, itll revert the other back to stock. If a dev mods yours instead, then the users get the best of both.
I would like to try yours, except two things, im always deodexed, and I never connect to the computer unless I have to use Odin. Almost everything else can be done either on device, or through wireless.
Nothing against what youve done though, so please dont take it as anything more than suggestion. It is always cool to show different ways of getting things done! I just think a lot more people could enjoy this if it were deodexed and recovery flashable.
Whatever you decide, good job on this! Ive been wanting to do the same ever since I got this thing, I just keep getting involved in too many other things!
Cant stand water drops when dialing! :what:
Sent from my SGH-T999 using xda app-developers app
used the flashable zip...but then it took my dialer theme away...reflashed the theme....and got the sound back with the theme.
krash183 said:
used the flashable zip...but then it took my dialer theme away...reflashed the theme....and got the sound back with the theme.
Click to expand...
Click to collapse
yes because it replaces the file ..
I am working on a script that will work for all vers .. themed or not
Fixed .. Give the new ver a try
WarlockW said:
yes because it replaces the file ..
I am working on a script that will work for all vers .. themed or not
Fixed .. Give the new ver a try
Click to expand...
Click to collapse
Sorry...I wasnt very clear.
I flashed the beep hack... THEME went away but had the beep hack sound. Reflashed the theme, but the beep hack sound stayed and had the theme came back. Wish there was a way to try it out.... but I have the beep hack sound on the phone. There a way to get the waterdrop sound back then i can test it out
I'm a little confused to what this mod does or why its necessary. If I understand correctly it removes the water droplet sound from the dialer. I don't have that sound because I turned it off in settings. Can't you just turn the sound off in settings?
Sent from my SGH-T999 using xda premium
circuit.007 said:
I'm a little confused to what this mod does or why its necessary. If I understand correctly it removes the water droplet sound from the dialer. I don't have that sound because I turned it off in settings. Can't you just turn the sound off in settings?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
LOL well sure you can .. but then you have NO sound at all ..
It nice to have some sort of sound when pressing a button ..
(NOT the darn water droplet sound though !)
Just so you know you pressed it ..
krash183 said:
Sorry...I wasnt very clear.
I flashed the beep hack... THEME went away but had the beep hack sound. Reflashed the theme, but the beep hack sound stayed and had the theme came back. Wish there was a way to try it out.... but I have the beep hack sound on the phone. There a way to get the waterdrop sound back then i can test it out
Click to expand...
Click to collapse
Its Cool .. glad it worked for you
Worked great for me on my AT&T S3. I have a custom dialer theme as well.
I re posted this OP in the at&t forums for others there to try.
May I present to you....
Stocktimus Series
Why?!
Even if we, by some MIRACLE, (Yeah right LG/Sprint By summer 2014. HA!!) get updated to Kitkat, there seems to be enough interest in another stock based ROM.
This is just a good base to make a Stock ROM the way you want. Just add the zips in Post #2, if you prefer. (WIP)
What this is...
This is just a stock Rom with some Tweaks built into it. If I didn't see an improvement, it wasn't added. It also has apps moved to /data to make it easier to remove what you don't want.
4-20-14 Stocktimus CE -"Custom Edition" added - This one is customized. See Below
You install this at your own risk!!! But really there shouldn't be any problems.
Install
Choose your flavor: Odexed or Deodexed, or CE
In either TWRP/CWM recovery wipe, /system, /data, /cache, and /dalvic. Just DON"T wipe "internal data". That's your SD
Bootup, depending on which ROM, may take up to 4 minutes. The apps from /data are installing.
It never hurts to go to Settings>System Updates, and update profile/prl
Special instuctions for both versions are in their sections.
Change logs:
Code:
v1
[SIZE="3"][COLOR="Blue"]Changes v1 - both O_v1 and D_v1[/COLOR][/SIZE]
[SIZE="3"]Stock Kernel[/SIZE] has init.d support - you can add your own scripts if you want
Boot animation by Partimus Prime
Removed power on/off sounds
Updated SuperSU to ver 1.93
Updated busybox to ver 1.21.1
Thermald modified - this should handle temps better - thanks Adrivalequez
Removed LG Install.apk - This is a snoop service found by LokifishMarz
Added Crwolv camera mod - thanks Lrod0175 and Crwolv
Zipaligned - and Zipaligns on reboot. So no worries about the changes you make
Cleaned up LG's messed up build.prop along with some tweaks
Added:
Viper sound app - Give it a second and select "Cortex A8 for neon" driver [url=http://forum.xda-developers.com/showthread.php?t=2191223]Thread is here[/url]
Xposed installer with Gravitybox module - [url=http://forum.xda-developers.com/showthread.php?t=1574401]Thread is here[/url]
UPDATED Apps moved or in /data:
Gravitybox,Sprint Voice Mail,Flashlight, Estrong File Explorer,Maps,Gmail,Google keyboard,Google Search,Text to speech,Youtube,Wifi tether,Quickboot,Viper Sound,Xposed,Android terminal,Polaris Office,
LG's apps:FileManager,FileShare,LGWorldClock,Marionette,Both Wallpaper apps,Noisefield,TomsDinner
Removed:Connections Optimizer,Sprint Bloat
There's probably other little things I changed. Just can't remember.....
[B]v1.5[/B]
[COLOR="Red"][B]Thermald is updated. This CAN make your phone run hotter if you push it!![/B][/COLOR]
Just flash this. It'll wipe cache and dalvik by itself.
Updated:
build.prop
init.d scripts - mostly readaheads
end of series and this is why? [url]http://forum.xda-developers.com/showpost.php?p=52056778&postcount=80[/url]
[B]CE v1[/B]
Features:
Using Viper Kernel - thanks gearslam
deodexed
De-bloated
5X4 Home Screen - thanks Lrod0175
init.d scripts
build.prop tweaks
apps moved to /data
other stuff I can't remember, but all the goodies from other's in the series
[B]CE v1.5[/B]
LG Browser modified with 25 tabs now
CPU, Memory, readahead scripts in init.d
thermal
build.prop
The Stock versions to make your way are Stocktimus "O" and "D" - versions 1 and 1.5
_____________________________________________________________________________________________________________
Stocktimus Odexed - just like factory-ish and no special instructions
Stocktimus_O_v1 Download________________________________________________________________________________________________________________
Stocktimus Deodexed - Used for Theming or....
Special instructions:
First boot can take up to 4min. Be patient
On first boot, to stop LG Keyboard from FC'ing, you'll need to go into Settings>Language & Input, and enable Google Keyboard
If you want LG Keyboard to work, you'll need to run Xposed framework. Info and thread HERE
When it boots up, turn off Wifi. For some reason it always turns itself on when first booted up.
Then go to Settings>System Updates and update Profile, PRL.
Stocktimus_D_v1 Download_________________________________________________________________________________________________
Stocktimus_v1.5 - this will update BOTH Odexed and Deodexed - Only an update, not a ROM
Stocktimus_v1.5 Download
________________________________________________________________________________
Stocktimus CE - Custom Edition
Instructions:
On first boot go to Settings>Language and input> and enable the keyboard. Otherwise, you'll just have voice KB. Also, enable Xposed, and Viper Sound mod.
Stocktimus_CE Download
___________________________________________________________________________________
Stocktimus CE - 1.5
Just a flashable update. This will wipe /cache, /dalvic and init.d scripts. So if you've added any extra scripts to your init.d, you'll need to add them back.
Before flashing, turn off "Eco-mode"/"Quad core control". This update now has scripts to control the CPU/GPU for better battery and the same performance. I've tamed Viper kernel.
I would recommend NOT using any app that will modify CPU. ie Trickster Mod. I made this because Trickster's settings wouldn't stick
See Change log above
Stocktimus_CE_v1.5 Download
_____________________________________________________________________________________
Thanks in no particular order
PartimusPrime
Shabbypenguin
xboxfanj
Adrivalequez
Lrod0175
Crwolv
LokifishMarz
gearslam
Add-ons - updated 4-22-14
Extras and add-ons - Will update these when I get time - (WIP)
Wifi tether settings:
Device Profile>Generic ICS/JB (wlan0)
Enable Wifi Encryption
That's what I use and it's always worked
And remember, EITHER wifi or Tether per reboot. So if you run one of them, then you need to reboot to use the other.
____________________________________________________________________________
If you want your phone go faster. (Not quite sure how to put that :silly
Go to Settings>Developer Options, about half way down there are 3 settings to adjust timing. Windows,Transition,and Animation. Try those on .5. I just set the Transition one to .5 and I works great for me.
_____________________________________________________________________
Before you do any of the following, make a nandroid backup in recovery!
Kernels:
Stock ZVC - Built in with init.d support. Here
Evolutionmods CodeCraft - this is what Viper kernel is based on - Here
Viper Kernel o/c&u/v - Get it and read it Here
Trickster mod was what I've used with the kernels. But no matter what I tried the settings will eventually change. Using Viper 1.0 or 1.1
_______________________________________________________________________
4X5 Home Sceen- gets rid of the google search bar and gives you more room on the screen - Thanks to Lrod0175 - 4X5 Launcher Works with Deodex.
To work with Odexed. In rooted explorer, go to /system/apps and delete LGHOME3.ODEX. Reboot to recovery and install 5x4 launcher. Done
View attachment 2655429___________________________________________________________________
Flashable Sprint boot animation - no sound. Here
____________________________________________________________________
Flashable Sprint boot and shutdown animation - With sounds. Here
___________________________________________________________________
If you want to change your boot animation, and it's not flashable, you can DL the Sprint with no sound above, open the zip with 7zip and replace the bootani with the one you want. Just make sure you name it bootanimation.zip. You shouldn't have to worry about permissions.
Heres a few if you want. Theres more in our Theme section
PartimusPrime thread. Built into Stocktimus, but in case you want it back. Here
HPTesla threads. Here and Here
octhrope's thread. Here
_Epic's thread. Here
This may not work for the shutdown animation
____________________________________________________________________________________
Stock thermald - http://d-h.st/Faz
____________________________________________________________________________________
Modded LGBrowser - now with 25 tabs. And BTW, #17-25 do not have the little numbers for the tabs. This will work for all Deodexed Stockish ROM's. It SHOULD work for Odexed if you delete LGBrowser.odex
http://d-h.st/mGz
Thanks engine95, I was getting a little worried there that the Optimus G area was getting a bit like a ghost town. I love the ROMs more when it is stock, not completely stock.
Wait, I forgot to say - FIRST!!
Yeah baby!!
You the man @engine95! Thanks for this!
Sent from my Optimus G using xda app-developers app
Thank you sir! Much appreciated man.
USB Debugging is grayed out and can't be turned on in Settings. This is not good. lol Bad flash? (Running DeOdex Version)
Edit: It magically showed up. All is good.
Hate random kernel crashes on Cyanogenmod 11. Hope this doesn't have any.
Could we use Qslide on this ROM if so where can I find it
Jamesredmond82 said:
Could we use Qslide on this ROM if so where can I find it
Click to expand...
Click to collapse
You can try it. It's in the OpTimus thead here. http://forum.xda-developers.com/showthread.php?p=46154045. If it doesn't work you should be able to restore, either your nandroid backup... or the flashable LgSystemUI.apk that's there to. I haven't tried that mod on this ROM yet so let us know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
You bet. I'll try to do it tonight or tomorrow. I'm out of town right now.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
You bet. I'll try to do it tonight or tomorrow. I'm out of town right now.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The Qslide worked but it did that the icons to custom icons in the status bar. So I went back to stock.
Jamesredmond82 said:
The Qslide worked but it did that the icons to custom icons in the status bar. So I went back to stock.
Click to expand...
Click to collapse
I forgot about that, and thanks for trying it.
I remember now that it had to be ported for us. I think international got it and we didn't. Most who tried it didn't feel it was worth the trouble to pursue. I'll talk to Leo and see if it's something I can modify to stock icons.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
I'm running actual stock right now. If you want I can pm you a dropbox of the stock boot ani.zip I know you have to set permissions for it to work correctly. And sorry op I didn't mean to hijack the thread with my longass response.
Edit: there seems to be 3 bootups and 2 shutdowns for stock. https://www.dropbox.com/sh/k8foh8dyh6oazwz/0xpLsBRl9M
That's a link to all 5 of them. As far as permissions go, I'll post a screenshot from my file manager showing them. You need to paste them in the folder I show, make sure you delete the old bootanimation.zip or it won't work.
Sent from my LG-LS970 using xda app-developers app
Sent from my LG-LS970 using xda app-developers app
mkuehl06 said:
I'm running actual stock right now. If you want I can pm you a dropbox of the stock boot ani.zip I know you have to set permissions for it to work correctly. And sorry op I didn't mean to hijack the thread with my longass response.
Edit: there seems to be 3 bootups and 2 shutdowns for stock. https://www.dropbox.com/sh/k8foh8dyh6oazwz/0xpLsBRl9M
That's a link to all 5 of them. As far as permissions go, I'll post a screenshot from my file manager showing them. You need to paste them in the folder I show, make sure you delete the old bootanimation.zip or it won't work.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
It's all good. I made a flashable zip. I just can't upload til later tonight.
The permissions are rw-r-r.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
Flashable Sprint boot animation with no sound added to OP, Post #2. If you want the sounds, let me know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Flashable Sprint boot animation with no sound added to OP, Post #2. If you want the sounds, let me know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ahh thanks man you've done enough. If you want to just add sound that'll be great if not that's fine too. Much appreciated.
Jamesredmond82 said:
Ahh thanks man you've done enough. If you want to just add sound that'll be great if not that's fine too. Much appreciated.
Click to expand...
Click to collapse
This time I got it right. :victory: Flashable zip with both Sprint boot and shutdown animations. With sound.
The other one I forgot the shutdown animations. Enjoy.
engine95 said:
This time I got it right. :victory: Flashable zip with both Sprint boot and shutdown animations. With sound.
The other one I forgot the shutdown animations. Enjoy.
Click to expand...
Click to collapse
Do you have the stock sounds or do I need to pull them?
Sent from my LG-LS970 using xda app-developers app