Develop Bugs

[Q] HELP!!!!

Hi, hope im posting in the right section.
i have had my desire since it came out , rooted it straight away , flashed loads of diffrent roms (from here) but now all of a sudden my desire has started crashing all the time and when i say all the time i mean about every 15 mins. I take the battrey out, boot use it for a min then when i next go to use it it wont do anything and i have to take the battrey out again and boot.
i have tried lots of diffrent roms it still does the same, i have even tried to run backups from rom manager and still the same. i have run antivirus still the same.
any ideas
thanks

It sounds like a kernel issue (too much undervoling or overclocking maybe, and some ROMs might not contain a kernel image), but first of all it would help us if you told us what ROM you're actually using right now.

Try to flash your sd rom.
If you use a2sd..partition again.
Full wipe again and flash you favorite rom.
If the problem still percist....Flash an official rom better old one 2.1 for no change to newer boot. Test the device if still freeze.
If everything ok, root again your phone ...partition again sd and then flash your favorite rom.

I've been having the same problem mate. Just flashed back to stock 2.1 and all seems fine now. Will reroot later this week and see what happens!
Sent from my HTC Desire using XDA App

Moved to Q&A.
Please do not post question threads in Development.
Post What Where:
General - general technical discussion items, news, anything else that does not fit into the other fora categories.
Q&A (Questions and Answers) - all questions, irrespective of type, get posted in here whether they be theme related, accessory related, technical, etc.
Accessories - any items to do with components and/or accessories relating to your device.
Rom Development - only meant for very advanced technical discussion directly related to ROM development activity and the delivery of actual ROMs and ROM components ONLY. Nothing else goes in here.
Themes & Apps - anything to do directly with the development of themes and/or applications. Nothing else goes in here.

Right sorry for the late reply the misses made me paint the kitchen before the new floor was put in.
well tried everything so then tried flashing back to stock but it carnt find bootloader (using magic mem card)
any more idea's?
ps im using aurxtsense 8.0
i was thinking it was something to do with clocking as well.
mine seams to have calmed down now, it still couldn't find bootloader though when i tried to flash a stock ruu.
i formated my memory card and re-flashed aurxtsense 8.0 and it hasn't crashed since.
haven't tried doing anything since because i aint got time to sit and sort it out at the mo if something goes wrong again

Not sure what the means but you should be able to flash the ruu from HTC or if your phone is branded then one from the network. There's a like to them all in the dev section.
Can tell u though that I flashed back to stock and had no problems. Bit since rooting again its back. Even wiped my SD card and recreate the partitions. Doesn't seem as frequent this time though. I went straight to a hd Rom. It never used to happen on older custom roms and do think its something to do with the volting & clocking.
Sent from my HTC Desire using XDA App

[Q] General rooting and ROM questions

Hi guys, I've had a Bell-branded Desire Z (on AT&T's network) for some time now, but I've never gotten around to rooting / flashing a different ROM on it. Since I have some free time this weekend, I figure I'll finally tackle it. Have a few general questions though:
1) Is the method listed in the guide: http://forum.xda-developers.com/showthread.php?t=928160 still the best method for rooting a desire Z? I've heard bad things about visionary, but every rooting method I've read seem to involve it in some way.
2) with S-OFF, am I free to flash any Desire Z / G2 ROM? or will only certain ROMs work with a Bell Desire Z? Any specific recommendation on ROMs? I'm planning on trying out CM7, then going from there
3) What is the best method for backing up my current image + a few other things (mostly contacts and SMS)? Titaniumbackup gets thrown around a lot, but I only have a handful of apps, and really would rather just redownload them then go through the trouble of backing them up
Thanks

http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
that is going to be your safest way to root your vision. eventhough this is longer, there is a lot less chance of bricking your phone. the one you listed is very simple to do, but runs a high risk of turning your phone into a paper weight.
when you do have your phone completely s off, you now have every right to flash kernels, roms, and other things. you can find all of the things i just listed over in the development forum on the g2/desire z. download rom manager from the market. that allows you to back up your current rom, flash the latest recovery and so on. it just allows you to not have to manually install everything. it has the popular g2 roms under the "download rom section".
in terms of backing up everything, there are a few different options. every contact to save is linked to your gmail account, so whatever rom you flash and load youll always have those contacts coming with you. thats the beauty of google and gmail on a android device! but with rom manager, you can back up your current rom and image with that app and save it to your sd card. BEFORE YOU FLASH ANY ROM, OR BEGIN TO START TRYING OUT ROMS, BACK UP YOUR STOCK ROM. whenever i got my g2 when it first came out, i made a nandroid backup of my stock rom and i still have it. when i originally backed it up, i just named it "stock" and havent messed with it since. i just know that i have the stock image(it helps me sleep at night). jk, heh. for your text messages and stuff, download sms backup from the market and you can back everything up through that. all of the apps that you download, including the paid ones of course, travel with you between roms, etc.
i hope i helped ya out, and i wish you luck. if you have any other questions, just shoot me a private message!

Thanks for that;
I actually went ahead and used that method in the guide since upon further research, it seems that visonary was only causing issues when it was use for perm root; temp root, which is what that method uses visionary for seems to work fine.
So did that, reboot into the bootloader, confirmed that I had S-OFF on the first line.
Installed ROM manager from the market
Flashed Clockwork recovery
Booted into recovery and did a system backup to SD card
Rebooted and decided to download the Virtuous ROM from ROM manager
Told it to reboot into recovery and flash that image, wiping all data and settings
Got stuck on an bootup loop (HTC logo + start up sound -> black screen -> HTC logo + startup sound ad infinitum)
Rebooted into recovery, and did a restore from the backup (whew)
Phone seems to be working fine now
Now I'm trying to figure out what went wrong... any ideas?

K, I redownloaded virtuous from XDA, checked the MD5, and tried to flash it again.
Same problem, infinite loop on startup screen.
Do i need to flash the engineering hboot? I was under the impression that that wasn't necessary for using custom ROMs.
Still can't figure out what's wrong.

did you debrand? http://forum.xda-developers.com/showthread.php?t=835777

Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!

Im new to this stuff here, and i DO want to learn about it as this stuff is very interesting to me! Technology is something i learn very quickly if im directed in the correct direction
The question i have here is about my Desire Z ( Bell Cannada ).
A few months ago we received a OTA update. So its currently running on Android 2.2.1 : Build - 1.84.666.2 CL322105, and its SUPER slow! Is it still possible to root this version?
I want to install the Gingerbread version on my phone, but i cant find instructions to root this OS version to be able to do so.
Or should i wait till the Official gingerbread Os to come out for our phones?
Ive been searching every where's for this info and everything i find is all back dated to last yr and nothing up-to-date after the OTA.
I hope this question is not TOO n00bish as i tried to search every where for it, and ether i could not find it or i did not enter the correct word search to get a result i needed.
Thanks in advance!
Andrew
Edit: NVM my question here.... i have finally found an update post within the wiki ( April 1 2011 )
Sorry for a useless post!
Thank you all for your efforts in posting in this forum! Very informative!

Athrun88 said:
Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!
Click to expand...
Click to collapse
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.

deaththeorist said:
did you debrand? http://forum.xda-developers.com/showthread.php?t=835777
Click to expand...
Click to collapse
You do not need to debrand to flash custom ROMs to the Bell Canada Desire Z.

makken85 said:
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.
Click to expand...
Click to collapse
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.

redpoint73 said:
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.
Click to expand...
Click to collapse
Yeah, I assumed that flashing from ROM manager just meant that it rebooted to recovery and flashed it from there. I guess there is a difference.
Either way, been playing with Virtuous 1.0.2 for a few days now, really like this ROM, but I'm itching to try out something different now. Man, I can see this is going to develop into a time consuming hobby.
Plus, I'm going to need a bigger SD card to store all of these ROMs + backup =X
Oh, another noob question; I've come across a few zip files that included a system folder and an META-INF folder. How exactly do I install these?

G2 only works with at&t
alright here it is my t-mobile G2 won't connect to the t-mobile network at all, I've went through 3 SIM cards because this thing use to kill the SIM card from working on other t-mobile phones and it works perfectly fine on at&t network. so I've unlocked so it will work on at&t just to see if it would work. so i gave p and bought a MT 4G, but i still want to know if the G2 is fixable because I'm just about ready to throw in the towel this is what I've tried to resolve the problem called t-mobile they ended up saying just return the phone but i can't since i didn't buy it from them. Called them again got the unlock code. I've flashed the radio a few times. I've also just got the leaked 2.3.3 update and nothing has worked. It find t-mobile network but says your SIM card isn't allowed to connect to this network then after trying again it says unable to connect to network please try again later.
Just so frustrating i don't know what to do just about to say forget it. this thread is my last resort.
also i still have S-OFF

i used this method on my G2 just yesterday and put on CM7.0.3. the only issues i came across were because i restored everything (should have just done apps and app data) using Titanium, which put me in a boot loop. I'm dumb, so i did it twice before i figured out what was the problem. the thread has a comment about how Visionary is dangerous, but the OP responded that since it is only used to gain temp root, there should be no problems.

[Q] Working with a Used Phone

Hello all,
Introduction:
My name is Dev, and I have purchased a phone from Craigslist about a year ago. I used to use Windows Mobile phones. I had no problems with them. I have used the T-mobile MDA, Wing, and Touch Pro 2. They have been good phones for me, until recently. I have always wanted a faster phone and the Touch Pro 2 seemed to be quick enough for me. Nope. It slowed down just like the others. My brother is younger than me, and he has been attracted to the Android market since the T-mobile G1. I never got an opportunity to enter this operating system market. I am very tech savvy however, and it has merely been a case of me not wanting to "change." However, I am past that and I want to contribute to the Android community. My first Android phone is the T-mobile myTouch 3G Slide. (I like sliding phones in case you haven't noticed. I must have the physical keyboard. I text a lot.) I bought it used from Craigslist, and it seemed to work fine then. The previous owner was nice enough to clear all the data off of it, and give it to me fresh. I have been using it since.
Leading into my problem/question:
Lately, however, it has been slowing down too. I want to reset it to a clean slate. I know how to do it. It is in the menus. However, I do not like how this phone has been modified. Why would you modify a phone? I have never had to do this with my Windows phones. There has never been a need to flash any roms or anything. They had updates which were simple to use. Plug the USB into the computer and follow the simple steps. Make sure it doesn't shut off during flash. Simple. I've done this plenty of times with printers, motherboards, CD-ROMs, and all other flashable devices. I understand how big of a risk this is. If the flash doesn't complete (or is the wrong rom), then the device will not work again. Unless, you J-TAG the device and flash it again correctly. But, that requires a lot of work, and a wiring schematic to figure out where the J-TAG ports are. I have learned this information from back in the day when I used to do dish testing. You would flash roms to satellite TV boxes and experiment with new encryption technologies for satellite TV. That being said, I am terrified of flashing phones, because I would have no idea where to look for J-TAG ports for phones, if I mess something up. So, in conclusion, my experience in flashing has been for testing purposes only.
Problem/Question:
How do I figure out what the status of my phone is? It says Cyanogen Mod on start up. My brother tells me this is a very good rom. Who decided that though? Is it a bad idea to go back to stock T-mobile rom? I've always had this thought nagging me to try it and see why people go through all this headache of S-OFF and rooting phones. However, if I go back to the stock rom, will I be able to gain access to the phone's internal memory again? I don't like the idea of losing the S-OFF and rooting privileges the previous owner worked so hard to do. I would like to flash the latest T-mobile rom to the device, but how do I know if it will mess up everything and clash with some code leftover from the modified rom of Cyanogen Mod? Also, how do I backup all my stuff? I want to keep all my setting for the programs I have downloaded from the Google Market. I want to keep my contacts and notes. I want to keep my text messages and MMS messages. I am one of those idiots who keeps all his text messages and MMS messages archived. I go back through the messages from time to time for retrieval of important information I may have spoken about with someone in the past. I know this is a loaded post. I am sorry. If anyone is willing or able to help me, then please pick any point in this post and we'll go from there. This was just an outline of everything so you guys can help me find a starting point.
What I Know About the Phone:
T-Mobile myTouch 3G Slide
Android 2.3.3
Baseband 47.63.35.21U_7.15.35.16
Kernel 2.6.32.17-cyanogenmod-g501281a [email protected] #1
CPU ARMv6-compatible process rev 5 (c6l)
Mod CyanogenMod-7.0.0-Slide
Build GRI40
I believe it is S-OFF and it is rooted. I would like a procedure to verify though. Please.
Memory Card:
Memory card has a lot of folders and stuff on it from which I have no idea. Some of it says nervous stuff like ".android_secure" "clockworkmod" "2111.zip" "signed_Froyo_Slide_Radio.zip" "gapps-gb-20110120-signed.zip" "update.zip" "update-cm-7.0.0-Slide-signed" and "Android" I like it when my memory card is clean with nothing but a few folders like "Pictures" "Videos" "Movies" "Data" "Programs" "Software" "Music" and other general stuff like that. I like this so I can use the memory card elsewhere and know where everything is. Basically, I want to know if I can delete everything without shooting myself in the foot. How do I find out what each .apk is for? Will a stock T-mobile rom come with all the stock backgrounds, contact pictures, and all the other stock goodies? I feel like some of those were on the SD card too.
Things I like:
Speed. I like things to be fast. Utilitarian. I don't want any fancy effects, typically. I like everything simple. For example, my desktops are all using the Classic Windows Theme, and all fade in / fade out have been disabled. I want my phone to be the same way. Nothing I don't need. Minimalistic. I don't like to keep many programs running at once. This was something I liked about the Windows phones. I could click in the upper right hand corner and it would present a list of running programs. I could close specific ones that I did not want to run in the background. Android doesn't seem to have a feature like this, but it does seem like they close if they are not being displayed on the screen.
WIFI
How do I fix the WIFI in this phone? It seems like the radio drivers are wrong are outdated. It keeps dropping the connection immediately after the phone connects to a wireless network. I noticed a thread, but I cannot post to it. I wanted to ask how I would apply this patch to my phone without having a rom or anything. I thought maybe I could boot the phone into the recovery mode, and install the radio drivers maybe? I don't know what I am doing though, and want some guidance.
http://forum.xda-developers.com/showthread.php?t=1177650
And, why does the GPS take so long to get a fix?
Moderators/Thanks
I am very sorry to anyone and everyone whom I may offend in this post. If all my questions are answered somewhere else, please direct me to the correct area. I have been searching and researching for so long and I don't seem to be getting anywhere. I gave up about two months ago, and now I am back again trying to fix this phone. Please do not be mad at me for pestering you guys with annoying questions from new users like me. I know you guys are tired of answering these questions over and over again. Please. Just give me a little guidance. Thank you so much for any and all help. I really truly appreciate this. Android seems to be a very good operating system, and I am looking forward to all your posts.
P.S.
Sorry about the length of this post. It is my first time.

Test
Testing to see if I get notification of replies.

Well, for starters, welcome to the myTouch 3G Slide fora, second, yes, your brother is right, you are running the best ROM available at the moment, but your running an older version of itif you like, i can link you to an updated version of the ROM or i can point you to the "Android Development" section of the forum for the myTouch Slide and you can pick one your self, if you need any help with your device, feel free to PM me or reply to this thread at any time, seeing as how iI am one of the last people who actually still support this device for ROMs, i would reccomend my "TeamFreedom LeWaOS" ROM, but im still working out some kinks in it, for now, i will give you the opportunity to update to the latest version of "CyanogenMOD 7.2":
Download the ROM (has fix for WiFi i believe): http://download.cyanogenmod.com/get/RC/update-cm-7.2.0-RC2-espresso-signed.zip
Download for the latest 2.3.3 GAPPS: http://goo.im/gapps/gapps-gb-20110828-signed.zip
Also, here is how to FLASH these ROMs:
Pre-requsite: PLACE "update-cm-7.2.0-RC2-espresso-signed.zip" and "gapps-gb-20110828-signed.zip" on the root of your sdcard
1: Hold the power button on your phone
2: Tap "Reboot"
3: Tap "Recovery"
4: when in "Recovery" use the Volume +/- keys to move and the trackpad to select "Wipe data/factory reset" then select "yes" if necessary
4a: select "Install zip from sdcard"
5: then select "choose zip from sdcard"
6: select "update-cm-7.2.0-RC2-espresso-signed.zip"
7: When finished select "reboot system now"
8: again, reboot into recovery
9: flash "gapps-gb-20110828-signed.zip"
10: reboot system, and enjoy your updated phone, this process overall is the same for all android phones, and for all ROMs

Thank You
Thanks. I will try the new CyanogenMod rom.

Dealing with the performance of your phone, how many SMS/MMS msgs do you have currently? I noticed you said you dont like deleting them. Thing is, if you have a lot of msgs it can significantly impact your phones performance. Obviously it impacts the messaging app but in my experience it can affect the whole system. This may not be the case on CM ROMS but i have noticed it on stock. (i dont use CM much, prefer Sense).
Also u can try overclocking. I like NoFrills app from market. Its free and allows u to select your i/o scheduler and governor.
For backups, hands down Titanium Backup is the best if u ask me (and many others).
Hope this helps a little.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Update on CM7
Hey, guys.
So, I've updated to CM 7.2.0. Since then, I've been having problems with the touch screen and the phone app. If I use the directional pad, I can highlight the phone app, but when I click on it, it crashes. Also, the touch screen is unresponsive all the time. Sometimes, I will get lucky and when I reboot it, I will get access to the touch screen again. I am wondering if maybe I didn't update the drivers for the touch screen or the phone radio or something. I have a hunch that the phone app is crashing and lagging the whole system, so the touch screen isn't working because of that. When the touch screen does work, the phone app is also working. I am thinking of just flashing the phone with HTC's stock rom and then rooting and s-off it all over again, because I think the previous owner didn't do something right. I want to know if I can just flash the stock rom without any consequences. And, also will I be able to get it rooted and s-offed again? I'm hoping that by flashing the stock rom, I can test my touch screen and phone app with confidence. Maybe the phone app is sending commands for a newer firmware revision, and mine isn't updated to that version yet. Not sure how this works really. Anyways, any help would be greatly appreciated. Thanks in advance.

Suggestion. Re-flash the rom, but in recovery go into advanced, wipe dalvik cache. Hit back, now in mounts and storage. Wipe the following, boot, system, hit back wipe/factory reset, wipe cache. Flash rom, then gapps. Reboot. You should be good to go. Hope this helps.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
Oh and to check for S-off reboot to bootloader when holding power, or while phone is off power on while holding vol down. Should say alfarev s-off or unlocked.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

Ran into a wall
Alright, guys.
So, I ran into a wall. It is now completely unresponsive to the touch screen. I had recently flashed it, and I am trying to do what you had suggested, Dvarl. The problem is that I cannot touch the android logo so I can continue onto the Rom Manager where I can flash and reboot into recovery. If I try to go into the recovery by holding the down arrow and power button, then clicking on "Recovery," I get the red triangle logo. It has always been this way. Lastly, my phone is not s-offed. Thanks for helping me out with that. lol Any ideas on how to flash without the Rom Manager recovery flash?
Edit: I think I have found the problem. I think my digitizer is going out. I am going to maybe purchase a new one and see if it fixes the touching problem. I'll keep you guys posted. Thanks for all your help thus far!

[Q&A] [ROM][4.4.4/KTU84P][OMNIROM][LINARO/OPTIMIZED] FML: Fork My Life (10/08/2014)

[Q&A] [ROM][4.4.4/KTU84P][OMNIROM][LINARO/OPTIMIZED] FML: Fork My Life (10/08/2014)
Q&A for [ROM][4.4.4/KTU84P][OMNIROM][LINARO/OPTIMIZED] FML: Fork My Life (10/08/2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

kbfirebreather said:
Anyone having problems with torch on the beta build? Not turning on LED for me, and keeps force closing.
Click to expand...
Click to collapse
I'm having issues with it as well. Sometimes it sits there thinking it works, other times it waits a few seconds and then crashes. It worked for a day...not sure what I did past that to break it.

Is there anyway to overclock the latest update? I know I can't install a new kernel with this ROM.
Also, any option for Volume Rocker unlock? I'm new to this ROM, coming from CM. I kinda rely on that option, since my power button is kinda on the fritz.

Fml 4.4.4 beta
I love this rom but my after clean flashing it the gallery and the camera will not show
Pictures. Is there anything I can do to fix it so I can get camera and gallery to work?

vicious01 said:
I love this rom but my after clean flashing it the gallery and the camera will not show
Pictures. Is there anything I can do to fix it so I can get camera and gallery to work?
Click to expand...
Click to collapse
Which gapps package are you using? I'm using the modular mini. Try another clean flash (sorry) and use a different package than you are now.

aaa
nothing

I've tried a lot of KitKat ROMs, but each one with a lot of issues. So I came back to the 4.3, it surprised me for his stability (1 year with bugged ROM make you feel that your phone sucks more than it actually does [no, it doesn't, I love it!]) and I decided to don't try your FML. Now I can't wait for Lollipop, and even if I haven't tried your ROM, I trust in it and I think it will be the best choice. Good work and thanks!

Could some1 possibly upload a video of this good work ? Got a maguro and I'm very curious
thx in advance!

Samsung Galaxy Nexus FML Lollipop
Hello. I hope this is the right place to post this. I have less than 10 posts so I have to post here...
I've tried to install your FML rom (the lollipop beta) on my Samsung Galaxy Nexus, but I seem to be having the same issue that coleburns is having. Namely, I flashed the rom from recovery, but when I reboot the phone, it shows the Google splash screen and then keep rebooting over and over again.
I understand that the first boot is supposed to take some time, but I've left it for over an hour and it still won't boot into the OS. Is there a step I'm missing?
I'm using the custom version of TWRP that you linked to in the first post. I also formatted all the partitions to ext4. Before flashing the rom, I performed the factory reset from recovery and also cleared the /system folder.
I've managed to load on the KitKat version of your ROM just fine...I can't work out what I'm doing wrong!
Anyway, if you need some logs or something to help debug the issue, let me know. Or, if I'm doing something wrong, could you please let me know? I'm very keen to try Lollipop!
Thanks.

Could some1 possibly upload a video of this good work ? Got a maguro and I'm very curious
thx in advance!

lollipop build 2
Haven't seen anybody ask... In your changelog for lollipop you said the rom takes a VERY LENGTHY FLASH TIME. Are we looking at 5 minutes or more?
edit: VERY LONG... over 5 minutes for me

This is the best rom ever!
When you said, "These builds are very early! They aren't daily-driver-stable, but they are progressing extremely fast." I was expecting junk, then I tried it. I was a big fan of your kit kat rom as well but once I tried this android l rom I fell in love. I have used this all day and it is extremly stable. The only bug I have to report that isnt even a need is the app drawer is the app drawer animation is very laggy. I tried enableing 2d gpu acceleration just in case that had something to do with it but it still didnt help. Any suggestions would be great. Oh and yes I have tried closing other apps, multitasking is no issue with this rom, the memory management is great. I thank you so much for such a great rom, keep up the amazing work.

Installing TWRP Problem
So I am currently on CWM and am trying to switch over to TWRP. I'm have a slight problem. When I install TWRP (via twrp manager app), I am also using the recommended custom twrp from the first post. It installs successfully, then I go into reboot options and reboot into recovery...and it's still CWM. I've tried it multiple times. I am rooted, I do have busybox installed, I can't figure out what the problem is. IM STUCK WITH CWM, HALP!

Mondos said:
So I am currently on CWM and am trying to switch over to TWRP. I'm have a slight problem. When I install TWRP (via twrp manager app), I am also using the recommended custom twrp from the first post. It installs successfully, then I go into reboot options and reboot into recovery...and it's still CWM. I've tried it multiple times. I am rooted, I do have busybox installed, I can't figure out what the problem is. IM STUCK WITH CWM, HALP!
Click to expand...
Click to collapse
Download the file in the OP for FML (twrp 2.7.1). Flash with Flashify. Reboot to recovery.

Don't worry too much about it not working. It's fully working for me but it's pretty slow when you actually need to use it. If you get it going it will pick up the pace, but it's far from usable, being in an app for longer than a minute and touching the home screen button will freeze it up for 10 seconds before it takes you to an empty screen that takes another few seconds to load all the apps and widgets back in. I'd wait for a newer release.

Feedback
Hello i have tried the older version and it was great but i really need my camera so i went back to 4.4 but i appreciate you so much thanks !
Please fix the camera asap and i will definitely install this rom ! and i tried to install the new version but it said Error Binary something in TWRP recovery what can i do thanks!

Q
Is the camera fixed yet?

Notification Light
Is there a way to disable the notification light while the phone is plugged in via USB? It's a little annoying to be on while I'm sleeping. It's not a huge issue though.

TheIbanez97 said:
Is there a way to disable the notification light while the phone is plugged in via USB? It's a little annoying to be on while I'm sleeping. It's not a huge issue though.
Click to expand...
Click to collapse
I don't think so.

I found that the miscellaneous section of the battery stats was taking up most of the battery usage. I don't have any apps installed other than the stock standard.

[Q&A] [ROM] Unofficial CM 12 Nightlies [20141129]

Q&A for [ROM] Unofficial CM 12 Nightlies [20141129]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Unofficial CM 12 Nightlies [20141129]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

work on sprint m8s
DocMentalZ said:
Yes this is yet another CM 12 thread. My goal is to produce nightlies (every night, unless I get shot at work) until the official nightlies start rolling. Will clean up thread throughout the night. (At work).
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Install instructions:
Be on an aosp/cm based rom
Factory reset
(I have been formatting system and having no issues.)
Flash rom
Flash gapps
Enjoy
What works:
Wifi
LTE
GPS
Text/MMS
Calls
Bluetooth & Bluetooth audio streaming
What doesnt:
WiFi Hotspot
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Links:
ROM
11/29/2014
https://www.androidfilehost.com/?fid=95832962473394658
GAPPS
http://forum.xda-developers.com/show...php?p=56810851
Sources used:
https://github.com/cyanogenmod
https://github.com/TheMuppets/proprietary_vendor_htc
Click to expand...
Click to collapse
I wanted to know if this rom works on sprint m8 thank you

Yes it should work for you.

CM 12 and coming from and return to sence roms
With CM 12 nightly can you revet back to sence rom without changing firmware? I am on current 4.4.4 Rom.

bug found maybe
In the blacklist settings you can change anything but off or on or it crashes the settings app

CM12 lockscreen issues
I have installed at least 3 different unofficial cm12 roms for my HTC One m8 and every one has the carrier name in the top middle instead of in the top left.
I know its small but its been driving me nuts. Any suggestions?

cant creat folder
i cant creat new folder in Ex-card (required root mode or somthing)...

bluetooth issues on lollipop (M8)
I'm finding that when I flash 5.0 to my M8 that my bluetooth audio streaming has issues. I use Google Play Music and it will send the meta data to my head unit but won't pass the music audio. However, if I get a notification, that does play through my speakers. The way I get it to work is I clear the data of the bluetooth app and then reboot my phone. That seems to fix it and I don't have to do it again unless I flash again. Any thoughts on this?

help!
help!
came to this rom from the pre-nightly
dirty flashed and seemed to work okay at first except couldnt save pics from messages
factory reset from twrp and flashed again now
cant seem to access internal sd to copy files across anymore adb no longer seems to work either?
with phone booted i cant even see any files on internal sd though i can in recovery but still cant copy files or use adb
cant download files to the phone over the internet etc either so cant get another rom on there
help!
am i missing something

well disabling mtp did the trick allowed me to sideload and away we go again
odd though

when trying to do a clean install of the newest version of the rom after the setup i dont have any navagation buttons or status think it is stuck in expanded mode some how

This rom is not finding my internal storage and the default file manager says that root is not available. What do I do?
EDIT: If anyone else has this problem, fix is here http://forum.xda-developers.com/showpost.php?p=57001225&postcount=161

sprint one m8 mms
Everything else seems to be running great but I cannot seem to send MMS at all. I'm hoping it's not a glaring user error on my part. Any ideas?

poweramp does not play after 1206 update :| also in settings it says it's 1203 build.

Issues
It is shortly to be perfect, but
1- after I installed the latest version (cm-12-20141211-UNOFFICIAL-i9300), the wifi was crazy, that is, connects and disconnects loop, connects and disconnects, on and off, on and off, even after dozens attempts sometimes can stay connected, but sometimes is switching on and off forever.
2 - Another problem is the URL from the browser address bar when we copy the address, the toolbar is above the text of the url, blocking out to select the text.
3 - Another problem is the list of recent accessed apps, still appearing random app in the list, after we clear the list and check again ...

Osfail said:
1- after I installed the latest version (cm-12-20141211-UNOFFICIAL-i9300),
Click to expand...
Click to collapse
i think you should post this in galaxy s 3 threads...

pagoweb said:
i think you should post this in galaxy s 3 threads...
Click to expand...
Click to collapse
Sorry, lost my mind! I wrote in the wrong place, now I've seen. Thank you

Process draining battery
Wrong place...

CM12 Installation
Hello, i have an Htc M8 from at&t with 4.4.4 I have currently installed the custom rom viper one. I want to move to cyanogemod 12 but i also have a custom kernal, elementalX to be exact. Will having a custom kernal do anything diferent if i installed CM12 the normal way? in other words do i have to go back to the stock kernal?

castrokevin619 said:
Hello, i have an Htc M8 from at&t with 4.4.4 I have currently installed the custom rom viper one. I want to move to cyanogemod 12 but i also have a custom kernal, elementalX to be exact. Will having a custom kernal do anything diferent if i installed CM12 the normal way? in other words do i have to go back to the stock kernal?
Click to expand...
Click to collapse
You not only need a CM-compatible kernel, but ofc also need one that is compatible to Lollipop.
In the elementalX-thread there is the right version of elementalX for you to download:
http://forum.xda-developers.com/showthread.php?t=2705613
If your kernel atm doesn't protect itself against a reflash, CM12 will install it's own stock kernel. But to be safe, I would go back to stock before flashing CM12