Hi,
I am using DN3 V5.5,.. I installed V4a couple of days back as per the proceduce given here on XDA :
1) Install apk version4 (for os above 4.x)
2) Open app, Install driver (I chose Super audio quality)
3) Enabled and rebooted.
4) Chose V4aFX in Music effects
5) Rebooted again
Did I do something wrong.. I tried various IRS files as well but there is no effect that I can really feel..
Can someone please help me on this.. I know there are lot of experts out there
thx
You did nothing wrong and this is unusual, have you tried dolby pro ligicII music irs? That irs is notificable and enable reverberation options like dry signal 50%, wet 10%, large room size etc. You should feel the difference.
silentkiller143 said:
Hi,
Did I do something wrong.. I tried various IRS files as well but there is no effect that I can really feel..
Click to expand...
Click to collapse
+1
I've installed V4A in the past because it was recommended but I couldn't really tell a difference.
It can't be mate, there must be something wrong, btw, viper doesn't boost sound, it modifies sound. If the installed version is correct and if you modify sound settings with different irs files, you must feel the changes. If nothing works for you guys, install 'Busybox free' from playstore and then check again.
nitol said:
It can't be mate, there must be something wrong, btw, viper doesn't boost sound, it modifies sound. If the installed version is correct and if you modify sound settings with different irs files, you must feel the changes. If nothing works for you guys, install 'Busybox free' from playstore and then check again.
Click to expand...
Click to collapse
Can you share that irs file please..
I have rooted phone..doesnt that mean I already have busybox installed? New to this stuff
silentkiller143 said:
Can you share that irs file please..
I have rooted phone..doesnt that mean I already have busybox installed? New to this stuff
Click to expand...
Click to collapse
Read this thread
http://forum.xda-developers.com/showthread.php?t=2737979
You'll find one irs (the best one) here plus few more tips and steps of viper. And this link contains a bunch of irs files
https://www.dropbox.com/s/ppq744qqwwrii4y/V4A IRS files.zip?dl=0
Related
I am root and I have installed Xposed Framework...
Tks
Jonho77 said:
I am root and I have installed Xposed Framework...
Tks
Click to expand...
Click to collapse
Search for "viper for android" install that and you can boost speaker volume nicely.
You can also modify your mixer_paths.xml file to boost speaker volume but viper is much better.
Thanks for your help, but I can't install viper ?. I'll try the suggested modification.
Jonho77 said:
Thanks for your help, but I can't install viper ?. I'll try the suggested modification.
Click to expand...
Click to collapse
In order to install viper you will have to copy audio.effects.conf from system/vendor/etc to system/etc then vipe will install and work as adverised (provided you also install busybox that is)
For some reason that file is not present in the system/etc folder and it needs to be there as well as system/vendor/etc for the viper installation to work.
Took me some work and help from others to figure that out in a round about way.
Oh and when you copy it make sure you change permissions to match everything else in that folder. You won't regret it, if you have any other problems the guys in the viper main thread are super helpful. or you can ask here and I will be glad to help also.
you can also edit the default_gain.conf files in system/etc
edan1979 said:
you can also edit the default_gain.conf files in system/etc
Click to expand...
Click to collapse
Could anyone tell me which options in the .conf file to edit ?
Why not just install Mxplayer, it automatically allows you to boost the volume, just enable it in the audio settings. imo there is no better player for Android.
Will it boost the volume past the limits set in the default_gain
Also, will it boost the volume of YouTube clips through my headphones ?
( which is what I actually want to do)
woodstok said:
Will it boost the volume past the limits set in the default_gain.conf file ?
Click to expand...
Click to collapse
It will boost up to 200% which i find is plenty loud enough.
Thanks I'll go grab it and check it out
woodstok said:
Thanks I'll go grab it and check it out
Click to expand...
Click to collapse
you also get the added bonus that it re-enables ac3 and dts support if you install this codec http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
Do you like to play you music EXTREMELY LOUD, CRISP, and CLEAR?
May I suggest ViPER4Android?
I have used this mod in almost ALL my devices. Some ROM Developers even include this Audio Mod built into their ROMs.
I have tested ViPER in my SM-G530AZ and it works Fantastically with headphones and/or ear buds. When using this mod in speaker mod, I haven't noticed any difference
I am NOT the developer, just passing on this AWESOME Audio Mod...
Here is the original thread : http://forum.xda-developers.com/showthread.php?t=2191223
Enjoy!
DJTeeJay said:
Do you like to play you music EXTREMELY LOUD, CRISP, and CLEAR?
May I suggest ViPER4Android?
I have used this mod in almost ALL my devices. Some ROM Developers even include this Audio Mod built into their ROMs.
I have tested ViPER in my SM-G530AZ and it works Fantastically with headphones and/or ear buds. When using this mod in speaker mod, I haven't noticed any difference
I am NOT the developer, just passing on this AWESOME Audio Mod...
Here is the original thread : http://forum.xda-developers.com/showthread.php?t=2191223
Enjoy!
Click to expand...
Click to collapse
Work great on my G530FZ. Thanks for sharing
Could you please show me how to install this correctly? I did all the step but nothing changed. The driver status said : disabled and no processing.
update : I succeeded installing thanks to this guide : http://forum.xda-developers.com/android/general/guide-how-to-make-viper4android-5-0-x-t3018961/page6
annbinh said:
Could you please show me how to install this correctly? I did all the step but nothing changed. The driver status said : disabled and no processing.
update : I succeeded installing thanks to this guide : http://forum.xda-developers.com/android/general/guide-how-to-make-viper4android-5-0-x-t3018961/page6
Click to expand...
Click to collapse
Yea you have follow the Samsung Device instructions in the thread...
Do you give a direct link.. You tested in whta version on Prime?
chuzpz said:
Do you give a direct link.. You tested in whta version on Prime?
Click to expand...
Click to collapse
Works great on my SM-G530H.
It's so amazing and unbelievable!!! The quality of sound improved significantly and now I'm interested in listening to music on my device more than ever before !!
You bring me the link pliss..
Not working for my galaxy grand prime SM G530-H. Can anyone help me ?
not working at all i followed the instructions but no effect can someone help me with that
chuzpz said:
Do you give a direct link.. You tested in whta version on Prime?
Click to expand...
Click to collapse
Crimmy20 said:
not working at all i followed the instructions but no effect can someone help me with that
Click to expand...
Click to collapse
harshil33 said:
Not working for my galaxy grand prime SM G530-H. Can anyone help me ?
Click to expand...
Click to collapse
First make sure your device has root permision
Then install Viper 4.x as normal app
After that open Viper and follow its instruction, notice that BusyBox after installed you need to open it and install something like the SmartCard Manager (it is at the bottom of the app I dont remember the name exactly)
Finally make sure your "SE for Android status" is Permisive (its original status is Enforcing), you can change this by installing the app SELinuxMode Changer I uploaded below.
Wish you luck!
Also not working on the Grand Prime SM-G900W8. Rooted, permissive kernel, busybox installed. Tried the flashable method, official apk and the play store apk. Keeps insisting that I do not have busybox installed. Also, I already made sure to install busybox with the stericson app.
is there a way to push V4A to work with ringtone or notif tone?
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
Skip 2. and go to 3. if you are using SuperSU
2. Change to permissive mode with SELinux Mode Changer that you can download here
3. Boot into twrp and flash Viper4Android, you can download the zip from here (old link here).
3b. Reflash SuperSu
3c. Wipe cache and dalvik
4. Boot
5. Start Viper4Android and give root access
6. Still in Viper4Android, under settings switch FX Compatible mode to Compatible.
7. Reboot
8. Activate Viper4Android
9. Enjoy
Additional info:
If you use Poweramp, disable Direct volume control in settings/audio/advanced tweaks.
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Just added the info in the first post:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
charliebigpot said:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
Click to expand...
Click to collapse
Thanks got it
Sent from my ONE E1003 using Tapatalk
charliebigpot said:
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
2. Change to permissive mode with SELinux Mode Changer that you can download here.
3. Boot into twrp and flash Viper4Android, you can download the zip from here
4. Open Viper4Android and under settings switch FX Compatible mode to Compatible.
5. Wipe dalvik and cache
6. Reboot
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
Click to expand...
Click to collapse
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I'm currently using V4A on 2.1.3-x with no problems. :good:
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I've flashed it, tbh I only notice a small difference when activating it but I still have to play around with the settings. Also, I'm using Jetaudio, maybe it doesn't work that well with that.
Also, I've just changed the description in the op, according to the viper4android post I link to if you already use supersu (which is the same as in the rooting guide) you don't need to do the change to permissive mode.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Did you just flash it or did you also change to permissive mode?
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
charliebigpot said:
Did you just flash it or did you also change to permissive mode?
Click to expand...
Click to collapse
For me personally, I used lolliviper in the nexus 5 forums. Flashed through TWRP and then followed by SuperSU.
No need to change the selinux.
---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------
primemonitor said:
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
Click to expand...
Click to collapse
With the phone speakers, not much I played around with some settings to give sound a "fuller" effect.
However with Bluetooth or wired headset, definitely noticeable.
Do you guys flash busybox also prior to all of this?
joho5 said:
Do you guys flash busybox also prior to all of this?
Click to expand...
Click to collapse
Through the play store.
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
Edit: I'm sorry I miss read the post. Yes, install busybox first then flashing V4A through TWRP.
Xtreme Music
Guys Viper works great but why don't u check out xtreme music mod too. It's the mixture of all the best music mods ..!!
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
parasthakur37 said:
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
Click to expand...
Click to collapse
imo, poweramp's equalizer does an amazing job already. Just ramp up the headphone gain from mixer_path.xml and you're good to go.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Savya said:
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Click to expand...
Click to collapse
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Mojar7070 said:
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Click to expand...
Click to collapse
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Savya said:
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Click to expand...
Click to collapse
I'll add the optional supersu step, but the rest is already there. After that it's up to each one to select between the 3 profiles at first boot.
Someone should try LolliViPER[6.0.1].zip zip on any 6.0+ ROM wit "Enforcing" kernel, see if it works.
I found this on the Nexus 5 post that is linked in the OP, guys got a bunch of Thanks for this, guess it wont hurt to try.
Hear the big difference with x3reme music and theater mod v2!!!
Supported with Sense 7-8, Marshmallow 6.0+
Changelog: 8/25/2016
Added HiFi Audio libs-x64 and sound effects and other files
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Side Note: Make backup if it breaks some settings send your me build.prop from the rom your using for a fix :good:
Download Below:
x3remeDSv2
It won't flash , script error
x3reme85 said:
Hear the big difference with x3reme music and theater mod!!!
Supported with Sense 7, Marshmallow 6.0
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Click to expand...
Click to collapse
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?
why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..
DeeZZ_NuuZZ said:
why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..
Click to expand...
Click to collapse
sorry everyone put in the wrong zip file thanks for the heads up :good: accidently deleted the wrong file had to do it over again lol its fix and ready to flash as just tested it myself
ZeroInfinity said:
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?
Click to expand...
Click to collapse
It's an updated Ds.apk and its not a stock file its been modified which is to make the speakers more louder.
sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock
DeeZZ_NuuZZ said:
sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock
Click to expand...
Click to collapse
Yeah thought so too so I added another file to fix that should be better now thanks for your opinion :good:
New Update Changelog: 8/24/2016
Added HiFi Audio libs x64 and sound effects
Has anyone flashed it yet? ��
didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
sorry am not on sense rom for now, and when i switch back i will either install viper10 when it's out or ICE10 port.
DeeZZ_NuuZZ said:
didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look
Click to expand...
Click to collapse
Libs are from 10
x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
Have you even tried it yet?? Or are you hoping every 1else will
Æaa \../
it breaks audio on htc music player and kills boomsound on ICE10 port.
and why you put a complete build.prop inside the zip, instead of making a script which changes only th things it needs.
download link does not work
michakulik said:
download link does not work
Click to expand...
Click to collapse
This mod doesn't work anyway and it's old af
Sent from my Google Pixel 3 XL using XDA Labs
I have the s6 edge+ and my wife has the note 5, can't get Viper to work just like everybody else. Other phone's versions of OS use mixer_paths.xml to adjust volume/levels, but these 2 phones have a separate file titled mixer_gains.xml where volume levels can easily be adjusted. Is this separate new file the reason why Viper won't work?
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
ElDuez said:
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
IT WORKED!!! AND IT KICKS ASS!! THANK YOU ElDuez and Mr. Junky! My ears rejoice!
Click to expand...
Click to collapse
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
mau921 said:
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
Click to expand...
Click to collapse
and false alarm! turns out it was just the Music apk I was using! all good now!