Help reinstalling stock rom - Ouya Q&A, Help & Troubleshooting

Hi, I have installed cm rom with Cwm recovery because the last stock version give me problems with dhcp. Now, we have new stock version and u want to install it but with Cwm recovery and boot. How can I do it? Any tutorial in this forum that I didn't saw? Thanks
Enviado desde mi SM-N9005 usando Tapatalk 2

Hi,
Just flash the Ouya fw zip with cwm...
Be careful, you loose root with new Ouya firmware...
https://ouyafw.skumler.net/

I also want Stock Rom back on my Ouya as I wann sell it through Ebay in the next days...
So I download the Stock Rom and install via CWM, OK.
But what can I do to remove CWM so I get a real factory reset device?

When you flash Ouya stock fw with cwm, at the end, cwm ask if you want flash recovery (when you click on reboot device on cwm), say yes and it's good....
Sorry for my bad english

Hi, only upgrading the thread. I installed the cwm manager apk in Cyanogenmod and recovery the stock rom without use keyboard. works like a charm!

Related

[Q] Won't boot rom or cwm recovery - only download mode

Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards

[Q] sm-p605 custom roms

HI, can anyone point me in the direction of a good custom rom for the p605? i cant seem to find any that support this model?
http://forum.xda-developers.com/showthread.php?t=2774680
[ROM][SM-P605][XXUCNE2][4.4.2] ★★xKat v3.1★★ (13.06.2014)
recovery help...
droisntns said:
http://forum.xda-developers.com/showthread.php?t=2774680
[ROM][SM-P605][XXUCNE2][4.4.2] ★★xKat v3.1★★ (13.06.2014)
Click to expand...
Click to collapse
Thanks so much for this - I have looked at the how to install the rom but can i ask one question? I tried to install the custom recovery in TWRP which found the device but when installing it ran the TWRP 2.6 and not 2.7.0.1 and when i tried to reboot in recovery i got a bootloop so had to reflash the stock rom. I am not sure if this caused the bootloop but because I dont want to make the same mistake again so can you step me through how to get the recovery ready prior to Intalling the rom in twrp??
first you must be on the 4.4.2 bootloader to flash this rom (flash P605XXUCNE2 with odin) 2 :make a fullwipe 3: flash TWRP 2.7.0.1(LTE) with odin 4: flash xKat v3.1 .The end

[Q] Need Help Guys!

I recently installed CWM after unlocking my bootloader. But realized after that every ROM requires different recovery (boot.img in the roms). But to install custom ROM you have to flash boot.img and that's what I did with the help of flashtool, but after when I'm trying to boot into recovery it's not even starting! let alone booting into recovery! , I think I bricked my phone guys! How to solve it? Please help!
I tried flashing stock firmware ftf with flashtool, and it worked! Now my phone is back stock 4.1.2.
But still one doubt how did flashing boot.img that came with flashtool soft bricked my phone? did I do something wrong? Also that boot.img was of CM 12 that i was installing at that time. Was that because I flashed boot.img even after having CWM installed prior?
Did you flash the rom from 4.3?
*blink*
Ya, I flashed the CM 12 on 4.3. But when I flashed the kernel i.e. boot.img supplied by the this zip-- ( CM11 unofficial FXP-cm-12-20150203-UNOFFICIAL-z3c_2) zip my phone bricked. I think there was something wrong with the zip, Cos today I flashed new cm-12-20150209-NIGHTLY build and it worked!
Can we change the kernel from Cynogen recovery to CWM ? and can CM 12 work with CWM?
Neon-Flash said:
Can we change the kernel from Cynogen recovery to CWM ? and can CM 12 work with CWM?
Click to expand...
Click to collapse
Of course it can :thumbup:
Here:
http://forum.xda-developers.com/showthread.php?p=58515383
*blink*
Try fotakernel, use either cwm or twrp, they are permanent (until you flash the original fotakernel)

Bootloop after Bootloader Unlock

Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Ckp1991 said:
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Click to expand...
Click to collapse
A1. This thread helped me. - http://forum.xda-developers.com/showthread.php?t=2532190.
A2. Yes, flashing stock rom would work even if you haven't installed any backup using CWM or TWRP.
A3. You can still flash CyanogenMod Nightlies directly instead of flashing the stock rom and then flashing CM again.
A4. Newbie here too! so I can't actually Suggest you anything
A5. It is supposed to take 5-10 minutes but even my phone went into bootloop.
What I did :-
> Flashed the old TWRP recovery from flashtool
> Installed CM and GApps
> Wiped Data/Factory Reset
> Rebooted the Device.
And VIOLA! the phone works like a charm!
I've been using the ROM for 2-3 days now and I have no major problems as of yet.
Hope this works out in your favour!
Happy Flashing!
After unlocking bootloader Bootloop is normal. You have to flash stock rom to fix it and also you can also flash any custom recovery(Cwm,Twrp) then flash any custom rom to fix it.
4.3 Indian Stock Rom
Recovery - CWM Philz
I am getting application error on flashtool help

Is my OnePlus 3 bricked ?

Hi,
This morning, i've installed the latest official Cyanogenmod 14.1 ROM with latest official CM Recovery. It's working but I don't like it and I want to reinstall the stock rom but everytime I try to flash the stock recovery, my OP3 don't boot. I always need to reflash the cm recovery. So i tried to flash via the CM recovery the latest official rom from OnePlus Website via sideload but it don't want. I'm OEM Unlocked and I have activate the USB debuging options. But in old versions of CM, we needed to uncheck a setting in Developpers options to flash another recovery but this options is missing in this version.
Can someone help me ?
I've had access to cyanogen if I need to do something in android and all the fastboot/adb commands are responding.
You need to flash the latest twrp from https://www.androidfilehost.com/?fid=385035244224394867 and then you can flash anything you want, don't flash any other twrp, it won't work.
Sent from my ONEPLUS A3003 using Tapatalk
RetroGame500 said:
Hi,
This morning, i've installed the latest official Cyanogenmod 14.1 ROM with latest official CM Recovery. It's working but I don't like it and I want to reinstall the stock rom but everytime I try to flash the stock recovery, my OP3 don't boot. I always need to reflash the cm recovery. So i tried to flash via the CM recovery the latest official rom from OnePlus Website via sideload but it don't want. I'm OEM Unlocked and I have activate the USB debuging options. But in old versions of CM, we needed to uncheck a setting in Developpers options to flash another recovery but this options is missing in this version.
Can someone help me ?
I've had access to cyanogen if I need to do something in android and all the fastboot/adb commands are responding.
Click to expand...
Click to collapse
another thing you can do is install oss from the link below, its the official link and it replaces the recovery with stock recovery (atleast in case of twrp) and if you want to stay with twrp you can install the modified twrp.
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.6/
Thanks guys for this help ! I've done my sideload via TWRP and it's fonctionnal. Have a nice day !
RetroGame500 said:
Thanks guys for this help ! I've done my sideload via TWRP and it's fonctionnal. Have a nice day !
Click to expand...
Click to collapse
You're welcome; thank you for letting as know you solved the problem.
Sent from my ONEPLUS A3003 using Tapatalk

Categories

Resources